Merge branch 'for_3.2/3_omap_devicetree' of git://gitorious.org/omap-pm/linux into dt

Documentation/devicetree/bindings/arm/omap/dsp.txt

+* TI - DSP (Digital Signal Processor)
+
+TI DSP included in OMAP SoC
+
+Required properties:
+- compatible : Should be "ti,omap3-c64" for OMAP3 & 4
+- ti,hwmods: "dsp"
+
+Examples:
+
+dsp {
+    compatible = "ti,omap3-c64";
+    ti,hwmods = "dsp";
+};

Documentation/devicetree/bindings/arm/omap/iva.txt

+* TI - IVA (Imaging and Video Accelerator) subsystem
+
+The IVA contain various audio, video or imaging HW accelerator
+depending of the version.
+
+Required properties:
+- compatible : Should be:
+  - "ti,ivahd" for OMAP4
+  - "ti,iva2.2" for OMAP3
+  - "ti,iva2.1" for OMAP2430
+  - "ti,iva1" for OMAP2420
+- ti,hwmods: "iva"
+
+Examples:
+
+iva {
+    compatible = "ti,ivahd", "ti,iva";
+    ti,hwmods = "iva";
+};

Documentation/devicetree/bindings/arm/omap/l3-noc.txt

+* TI - L3 Network On Chip (NoC)
+
+This version is an implementation of the generic NoC IP
+provided by Arteris.
+
+Required properties:
+- compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
+               Should be "ti,omap4-l3-noc" for OMAP4 family
+- ti,hwmods: "l3_main_1", ... One hwmod for each noc domain.
+
+Examples:
+
+ocp {
+	compatible = "ti,omap4-l3-noc", "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+};

Documentation/devicetree/bindings/arm/omap/mpu.txt

+* TI - MPU (Main Processor Unit) subsystem
+
+The MPU subsystem contain one or several ARM cores
+depending of the version.
+The MPU contain CPUs, GIC, L2 cache and a local PRCM.
+
+Required properties:
+- compatible : Should be "ti,omap3-mpu" for OMAP3
+               Should be "ti,omap4-mpu" for OMAP4
+- ti,hwmods: "mpu"
+
+Examples:
+
+- For an OMAP4 SMP system:
+
+mpu {
+    compatible = "ti,omap4-mpu";
+    ti,hwmods = "mpu";
+};
+
+
+- For an OMAP3 monocore system:
+
+mpu {
+    compatible = "ti,omap3-mpu";
+    ti,hwmods = "mpu";
+};

Documentation/devicetree/bindings/arm/omap/omap.txt

+* Texas Instruments OMAP
+
+OMAP is currently using a static file per SoC family to describe the
+IPs present in the SoC.
+On top of that an omap_device is created to extend the platform_device
+capabilities and to allow binding with one or several hwmods.
+The hwmods will contain all the information to build the device:
+adresse range, irq lines, dma lines, interconnect, PRCM register,
+clock domain, input clocks.
+For the moment just point to the existing hwmod, the next step will be
+to move data from hwmod to device-tree representation.
+
+
+Required properties:
+- compatible: Every devices present in OMAP SoC should be in the
+  form: "ti,XXX"
+- ti,hwmods: list of hwmod names (ascii strings), that comes from the OMAP
+  HW documentation, attached to a device. Must contain at least
+  one hwmod.
+
+Optional properties:
+- ti,no_idle_on_suspend: When present, it prevents the PM to idle the module
+  during suspend.
+
+
+Example:
+
+spinlock@1 {
+    compatible = "ti,omap4-spinlock";
+    ti,hwmods = "spinlock";
+};
+
+
+Boards:
+
+- OMAP3 BeagleBoard : Low cost community board
+  compatible = "ti,omap3-beagle", "ti,omap3"
+
+- OMAP4 SDP : Software Developement Board
+  compatible = "ti,omap4-sdp", "ti,omap4430"
+
+- OMAP4 PandaBoard : Low cost community board
+  compatible = "ti,omap4-panda", "ti,omap4430"

arch/arm/boot/dts/omap3-beagle.dts

+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+	model = "TI OMAP3 BeagleBoard";
+	compatible = "ti,omap3-beagle", "ti,omap3";
+
+	/*
+	 * Since the initial device tree board file does not create any
+	 * devices (MMC, network...), the only way to boot is to provide a
+	 * ramdisk.
+	 */
+	chosen {
+		bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+};

arch/arm/boot/dts/omap3.dtsi

+/*
+ * Device Tree Source for OMAP3 SoC
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "ti,omap3430", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a8";
+		};
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is uses for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap3-mpu";
+			ti,hwmods = "mpu";
+		};
+
+		iva {
+			compatible = "ti,iva2.2";
+			ti,hwmods = "iva";
+
+			dsp {
+				compatible = "ti,omap3-c64";
+			};
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the OMAP3 interconnect.
+	 * The real OMAP interconnect network is quite complex.
+	 * Since that will not bring real advantage to represent that in DT for
+	 * the moment, just use a fake OCP bus entry to represent the whole bus
+	 * hierarchy.
+	 */
+	ocp {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main";
+
+		intc: interrupt-controller@1 {
+			compatible = "ti,omap3-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+	};
+};

arch/arm/boot/dts/omap4-panda.dts

+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap4.dtsi"
+
+/ {
+	model = "TI OMAP4 PandaBoard";
+	compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
+
+	/*
+	 * Since the initial device tree board file does not create any
+	 * devices (MMC, network...), the only way to boot is to provide a
+	 * ramdisk.
+	 */
+	chosen {
+		bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+};

arch/arm/boot/dts/omap4-sdp.dts

+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap4.dtsi"
+
+/ {
+	model = "TI OMAP4 SDP board";
+	compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
+
+	/*
+	 * Since the initial device tree board file does not create any
+	 * devices (MMC, network...), the only way to boot is to provide a
+	 * ramdisk.
+	 */
+	chosen {
+		bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+};

arch/arm/boot/dts/omap4.dtsi

+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Carveout for multimedia usecases
+ * It should be the last 48MB of the first 512MB memory part
+ * In theory, it should not even exist. That zone should be reserved
+ * dynamically during the .reserve callback.
+ */
+/memreserve/ 0x9d000000 0x03000000;
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "ti,omap4430", "ti,omap4";
+	interrupt-parent = <&gic>;
+
+	aliases {
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+		};
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+		};
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is uses for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap4-mpu";
+			ti,hwmods = "mpu";
+		};
+
+		dsp {
+			compatible = "ti,omap3-c64";
+			ti,hwmods = "dsp";
+		};
+
+		iva {
+			compatible = "ti,ivahd";
+			ti,hwmods = "iva";
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the OMAP4 interconnect.
+	 * The real OMAP interconnect network is quite complex.
+	 *
+	 * MPU -+-- MPU_PRIVATE - GIC, L2
+	 *      |
+	 *      +----------------+----------+
+	 *      |                |          |
+	 *      +            +- EMIF - DDR  |
+	 *      |            |              |
+	 *      |            +     +--------+
+	 *      |            |     |
+	 *      |            +- L4_ABE - AESS, MCBSP, TIMERs...
+	 *      |            |
+	 *      +- L3_MAIN --+- L4_CORE - IPs...
+	 *                   |
+	 *                   +- L4_PER - IPs...
+	 *                   |
+	 *                   +- L4_CFG -+- L4_WKUP - IPs...
+	 *                   |          |
+	 *                   |          +- IPs...
+	 *                   +- IPU ----+
+	 *                   |          |
+	 *                   +- DSP ----+
+	 *                   |          |
+	 *                   +- DSS ----+
+	 *
+	 * Since that will not bring real advantage to represent that in DT for
+	 * the moment, just use a fake OCP bus entry to represent the whole bus
+	 * hierarchy.
+	 */
+	ocp {
+		compatible = "ti,omap4-l3-noc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+
+		gic: interrupt-controller@48241000 {
+			compatible = "arm,cortex-a9-gic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x48241000 0x1000>,
+			      <0x48240100 0x0100>;
+		};
+	};
+};

arch/arm/mach-omap2/Kconfig

@@ -106,9 +106,13 @@ comment "OMAP Board Type"
 	depends on ARCH_OMAP2PLUS
 
 config MACH_OMAP_GENERIC
-	bool "Generic OMAP board"
-	depends on ARCH_OMAP2
+	bool "Generic OMAP2+ board"
+	depends on ARCH_OMAP2PLUS
+	select USE_OF
 	default y
+	help
+	  Support for generic TI OMAP2+ boards using Flattened Device Tree.
+	  More information at Documentation/devicetree
 
 config MACH_OMAP2_TUSB6010
 	bool

arch/arm/mach-omap2/board-generic.c

 /*
- * linux/arch/arm/mach-omap2/board-generic.c
- *
  * Copyright (C) 2005 Nokia Corporation
  * Author: Paul Mundt <paul.mundt@nokia.com>
  *
- * Modified from mach-omap/omap1/board-generic.c
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
  *
- * Code for generic OMAP2 board. Should work on many OMAP2 systems where
- * the bootloader passes the board-specific data to the kernel.
- * Do not put any board specific code to this file; create a new machine
- * type if you need custom low-level initializations.
+ * Modified from the original mach-omap/omap2/board-generic.c did by Paul
+ * to support the OMAP2+ device tree boards with an unique board file.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
 
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/irqdomain.h>
+#include <linux/i2c/twl.h>
 
 #include <mach/hardware.h>
-#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
 
-#include <mach/gpio.h>
-#include <plat/usb.h>
 #include <plat/board.h>
 #include <plat/common.h>
+#include <mach/omap4-common.h>
+#include "common-board-devices.h"
+
+/*
+ * XXX: Still needed to boot until the i2c & twl driver is adapted to
+ * device-tree
+ */
+static struct twl4030_platform_data sdp4430_twldata = {
+	.irq_base	= TWL6030_IRQ_BASE,
+	.irq_end	= TWL6030_IRQ_END,
+};
 
-static struct omap_board_config_kernel generic_config[] = {
+static void __init omap4_i2c_init(void)
+{
+	omap4_pmic_init("twl6030", &sdp4430_twldata);
+}
+
+static struct twl4030_platform_data beagle_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
 };
 
-static void __init omap_generic_init_early(void)
+static void __init omap3_i2c_init(void)
 {
-	omap2_init_common_infrastructure();
+	omap3_pmic_init("twl4030", &beagle_twldata);
 }
 
+static struct of_device_id omap_dt_match_table[] __initdata = {
+	{ .compatible = "simple-bus", },
+	{ .compatible = "ti,omap-infra", },
+	{ }
+};
+
+static struct of_device_id intc_match[] __initdata = {
+	{ .compatible = "ti,omap3-intc", },
+	{ .compatible = "arm,cortex-a9-gic", },
+	{ }
+};
+
 static void __init omap_generic_init(void)
 {
+	struct device_node *node = of_find_matching_node(NULL, intc_match);
+	if (node)
+		irq_domain_add_simple(node, 0);
+
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
-	omap_board_config = generic_config;
-	omap_board_config_size = ARRAY_SIZE(generic_config);
+
+	of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
 }
 
-static void __init omap_generic_map_io(void)
+static void __init omap4_init(void)
 {
-	if (cpu_is_omap242x()) {
-		omap2_set_globals_242x();
-		omap242x_map_common_io();
-	} else if (cpu_is_omap243x()) {
-		omap2_set_globals_243x();
-		omap243x_map_common_io();
-	} else if (cpu_is_omap34xx()) {
-		omap2_set_globals_3xxx();
-		omap34xx_map_common_io();
-	} else if (cpu_is_omap44xx()) {
-		omap2_set_globals_443x();
-		omap44xx_map_common_io();
-	}
+	omap4_i2c_init();
+	omap_generic_init();
 }
 
-/* XXX This machine entry name should be updated */
-MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
-	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
-	.boot_params	= 0x80000100,
+static void __init omap3_init(void)
+{
+	omap3_i2c_init();
+	omap_generic_init();
+}
+
+#if defined(CONFIG_SOC_OMAP2420)
+static const char *omap242x_boards_compat[] __initdata = {
+	"ti,omap2420",
+	NULL,
+};
+
+DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
 	.reserve	= omap_reserve,
-	.map_io		= omap_generic_map_io,
-	.init_early	= omap_generic_init_early,
+	.map_io		= omap242x_map_io,
+	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap2_timer,
+	.dt_compat	= omap242x_boards_compat,
+MACHINE_END
+#endif
+
+#if defined(CONFIG_SOC_OMAP2430)
+static const char *omap243x_boards_compat[] __initdata = {
+	"ti,omap2430",
+	NULL,
+};
+
+DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
+	.reserve	= omap_reserve,
+	.map_io		= omap243x_map_io,
+	.init_early	= omap2430_init_early,
+	.init_irq	= omap2_init_irq,
+	.init_machine	= omap_generic_init,
+	.timer		= &omap2_timer,
+	.dt_compat	= omap243x_boards_compat,
+MACHINE_END
+#endif
+
+#if defined(CONFIG_ARCH_OMAP3)
+static const char *omap3_boards_compat[] __initdata = {
+	"ti,omap3",
+	NULL,
+};
+
+DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
+	.reserve	= omap_reserve,
+	.map_io		= omap3_map_io,
+	.init_early	= omap3430_init_early,
+	.init_irq	= omap3_init_irq,
+	.init_machine	= omap3_init,
+	.timer		= &omap3_timer,
+	.dt_compat	= omap3_boards_compat,
+MACHINE_END
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4)
+static const char *omap4_boards_compat[] __initdata = {
+	"ti,omap4",
+	NULL,
+};
+
+DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
+	.reserve	= omap_reserve,
+	.map_io		= omap4_map_io,
+	.init_early	= omap4430_init_early,
+	.init_irq	= gic_init_irq,
+	.init_machine	= omap4_init,
+	.timer		= &omap4_timer,
+	.dt_compat	= omap4_boards_compat,
 MACHINE_END
+#endif

arch/arm/mach-omap2/board-omap3beagle.c

@@ -486,8 +486,8 @@ static void __init beagle_opp_init(void)
 	if (cpu_is_omap3630()) {
 		struct device *mpu_dev, *iva_dev;
 
-		mpu_dev = omap2_get_mpuss_device();
-		iva_dev = omap2_get_iva_device();
+		mpu_dev = omap_device_get_by_hwmod_name("mpu");
+		iva_dev = omap_device_get_by_hwmod_name("iva");
 
 		if (!mpu_dev || !iva_dev) {
 			pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",

arch/arm/mach-omap2/devices.c

@@ -16,6 +16,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/slab.h>
+#include <linux/of.h>
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
@@ -77,6 +78,10 @@ static int __init omap4_l3_init(void)
 	struct platform_device *pdev;
 	char oh_name[L3_MODULES_MAX_LEN];
 
+	/* If dtb is there, the devices will be created dynamically */
+	if (of_have_populated_dt())
+		return -ENODEV;
+
 	/*
 	 * To avoid code running on other OMAPs in
 	 * multi-omap builds
@@ -221,14 +226,6 @@ static inline void omap_init_camera(void)
 #endif
 }
 
-struct omap_device_pm_latency omap_keyboard_latency[] = {
-	{
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func   = omap_device_enable_hwmods,
-		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 int __init omap4_keyboard_init(struct omap4_keypad_platform_data
 			*sdp4430_keypad_data, struct omap_board_data *bdata)
 {
@@ -248,9 +245,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data
 	keypad_data = sdp4430_keypad_data;
 
 	pdev = omap_device_build(name, id, oh, keypad_data,
-			sizeof(struct omap4_keypad_platform_data),
-			omap_keyboard_latency,
-			ARRAY_SIZE(omap_keyboard_latency), 0);
+			sizeof(struct omap4_keypad_platform_data), NULL, 0, 0);
 
 	if (IS_ERR(pdev)) {
 		WARN(1, "Can't build omap_device for %s:%s.\n",
@@ -263,14 +258,6 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data
 }
 
 #if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
-static struct omap_device_pm_latency mbox_latencies[] = {
-	[0] = {
-		.activate_func = omap_device_enable_hwmods,
-		.deactivate_func = omap_device_idle_hwmods,
-		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static inline void omap_init_mbox(void)
 {
 	struct omap_hwmod *oh;
@@ -282,8 +269,7 @@ static inline void omap_init_mbox(void)
 		return;
 	}
 
-	pdev = omap_device_build("omap-mailbox", -1, oh, NULL, 0,
-				mbox_latencies, ARRAY_SIZE(mbox_latencies), 0);
+	pdev = omap_device_build("omap-mailbox", -1, oh, NULL, 0, NULL, 0, 0);
 	WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n",
 						__func__, PTR_ERR(pdev));
 }
@@ -334,14 +320,6 @@ static inline void omap_init_audio(void) {}
 
 #include <plat/mcspi.h>
 
-struct omap_device_pm_latency omap_mcspi_latency[] = {
-	[0] = {
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func   = omap_device_enable_hwmods,
-		.flags		 = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
 {
 	struct platform_device *pdev;
@@ -372,8 +350,7 @@ static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
 
 	spi_num++;
 	pdev = omap_device_build(name, spi_num, oh, pdata,
-				sizeof(*pdata),	omap_mcspi_latency,
-				ARRAY_SIZE(omap_mcspi_latency), 0);
+				sizeof(*pdata),	NULL, 0, 0);
 	WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s\n",
 				name, oh->name);
 	kfree(pdata);
@@ -698,14 +675,6 @@ static int __init omap2_init_devices(void)
 arch_initcall(omap2_init_devices);
 
 #if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
-static struct omap_device_pm_latency omap_wdt_latency[] = {
-	[0] = {
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func   = omap_device_enable_hwmods,
-		.flags		 = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static int __init omap_init_wdt(void)
 {
 	int id = -1;
@@ -723,9 +692,7 @@ static int __init omap_init_wdt(void)
 		return -EINVAL;
 	}
 
-	pdev = omap_device_build(dev_name, id, oh, NULL, 0,
-				omap_wdt_latency,
-				ARRAY_SIZE(omap_wdt_latency), 0);
+	pdev = omap_device_build(dev_name, id, oh, NULL, 0, NULL, 0, 0);
 	WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n",
 				dev_name, oh->name);
 	return 0;

arch/arm/mach-omap2/display.c

@@ -35,14 +35,6 @@ static struct platform_device omap_display_device = {
 	},
 };
 
-static struct omap_device_pm_latency omap_dss_latency[] = {
-	[0] = {
-		.deactivate_func        = omap_device_idle_hwmods,
-		.activate_func          = omap_device_enable_hwmods,
-		.flags			= OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 struct omap_dss_hwmod_data {
 	const char *oh_name;
 	const char *dev_name;
@@ -111,8 +103,7 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
 		pdev = omap_device_build(curr_dss_hwmod[i].dev_name,
 				curr_dss_hwmod[i].id, oh, &pdata,
 				sizeof(struct omap_display_platform_data),
-				omap_dss_latency,
-				ARRAY_SIZE(omap_dss_latency), 0);
+				NULL, 0, 0);
 
 		if (WARN((IS_ERR(pdev)), "Could not build omap_device for %s\n",
 				curr_dss_hwmod[i].oh_name))

arch/arm/mach-omap2/dma.c

@@ -87,14 +87,6 @@ static u16 reg_map[] = {
 	[CCDN]			= 0xd8,
 };
 
-static struct omap_device_pm_latency omap2_dma_latency[] = {
-	{
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func	 = omap_device_enable_hwmods,
-		.flags		 = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static void __iomem *dma_base;
 static inline void dma_write(u32 val, int reg, int lch)
 {
@@ -258,8 +250,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
 
 	p->errata		= configure_dma_errata();
 
-	pdev = omap_device_build(name, 0, oh, p, sizeof(*p),
-			omap2_dma_latency, ARRAY_SIZE(omap2_dma_latency), 0);
+	pdev = omap_device_build(name, 0, oh, p, sizeof(*p), NULL, 0, 0);
 	kfree(p);
 	if (IS_ERR(pdev)) {
 		pr_err("%s: Can't build omap_device for %s:%s.\n",

arch/arm/mach-omap2/gpio.c

@@ -24,14 +24,6 @@
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
 
-static struct omap_device_pm_latency omap_gpio_latency[] = {
-	[0] = {
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func   = omap_device_enable_hwmods,
-		.flags		 = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 {
 	struct platform_device *pdev;
@@ -108,9 +100,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 	}
 
 	pdev = omap_device_build(name, id - 1, oh, pdata,
-				sizeof(*pdata),	omap_gpio_latency,
-				ARRAY_SIZE(omap_gpio_latency),
-				false);
+				sizeof(*pdata),	NULL, 0, false);
 	kfree(pdata);
 
 	if (IS_ERR(pdev)) {

arch/arm/mach-omap2/hsmmc.c

@@ -409,31 +409,17 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 	return 0;
 }
 
-static struct omap_device_pm_latency omap_hsmmc_latency[] = {
-	[0] = {
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func	 = omap_device_enable_hwmods,
-		.flags		 = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-	/*
-	 * XXX There should also be an entry here to power off/on the
-	 * MMC regulators/PBIAS cells, etc.
-	 */
-};
-
 #define MAX_OMAP_MMC_HWMOD_NAME_LEN		16
 
 void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
 {
 	struct omap_hwmod *oh;
 	struct platform_device *pdev;
-	struct omap_device_pm_latency *ohl;
 	char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN];
 	struct omap_mmc_platform_data *mmc_data;
 	struct omap_mmc_dev_attr *mmc_dev_attr;
 	char *name;
 	int l;
-	int ohl_cnt = 0;
 
 	mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
 	if (!mmc_data) {
@@ -448,8 +434,6 @@ void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
 	omap_hsmmc_mux(mmc_data, (ctrl_nr - 1));
 
 	name = "omap_hsmmc";
-	ohl = omap_hsmmc_latency;
-	ohl_cnt = ARRAY_SIZE(omap_hsmmc_latency);
 
 	l = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN,
 		     "mmc%d", ctrl_nr);
@@ -468,7 +452,7 @@ void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
 	}
 
 	pdev = omap_device_build(name, ctrl_nr - 1, oh, mmc_data,
-		sizeof(struct omap_mmc_platform_data), ohl, ohl_cnt, false);
+		sizeof(struct omap_mmc_platform_data), NULL, 0, false);
 	if (IS_ERR(pdev)) {
 		WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name);
 		kfree(mmc_data->slots[0].name);

arch/arm/mach-omap2/hwspinlock.c

@@ -23,14 +23,6 @@
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
 
-struct omap_device_pm_latency omap_spinlock_latency[] = {
-	{
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func   = omap_device_enable_hwmods,
-		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	}
-};
-
 int __init hwspinlocks_init(void)
 {
 	int retval = 0;
@@ -48,9 +40,7 @@ int __init hwspinlocks_init(void)
 	if (oh == NULL)
 		return -EINVAL;
 
-	pdev = omap_device_build(dev_name, 0, oh, NULL, 0,
-				omap_spinlock_latency,
-				ARRAY_SIZE(omap_spinlock_latency), false);
+	pdev = omap_device_build(dev_name, 0, oh, NULL, 0, NULL, 0, false);
 	if (IS_ERR(pdev)) {
 		pr_err("Can't build omap_device for %s:%s\n", dev_name,
 								oh_name);

arch/arm/mach-omap2/mcbsp.c

@@ -122,14 +122,6 @@ static int omap3_enable_st_clock(unsigned int id, bool enable)
 	return 0;
 }
 
-struct omap_device_pm_latency omap2_mcbsp_latency[] = {
-	{
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func   = omap_device_enable_hwmods,
-		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 {
 	int id, count = 1;
@@ -175,8 +167,7 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 		count++;
 	}
 	pdev = omap_device_build_ss(name, id, oh_device, count, pdata,
-				sizeof(*pdata), omap2_mcbsp_latency,
-				ARRAY_SIZE(omap2_mcbsp_latency), false);
+				sizeof(*pdata), NULL, 0, false);
 	kfree(pdata);
 	if (IS_ERR(pdev))  {
 		pr_err("%s: Can't build omap_device for %s:%s.\n", __func__,

arch/arm/mach-omap2/omap_l3_noc.c

@@ -127,7 +127,7 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
 	return IRQ_HANDLED;
 }
 
-static int __init omap4_l3_probe(struct platform_device *pdev)
+static int __devinit omap4_l3_probe(struct platform_device *pdev)
 {
 	static struct omap4_l3 *l3;
 	struct resource	*res;
@@ -218,7 +218,7 @@ static int __init omap4_l3_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int __exit omap4_l3_remove(struct platform_device *pdev)
+static int __devexit omap4_l3_remove(struct platform_device *pdev)
 {
 	struct omap4_l3 *l3 = platform_get_drvdata(pdev);
 
@@ -232,16 +232,29 @@ static int __exit omap4_l3_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#if defined(CONFIG_OF)
+static const struct of_device_id l3_noc_match[] = {
+	{.compatible = "ti,omap4-l3-noc", },
+	{},
+}
+MODULE_DEVICE_TABLE(of, l3_noc_match);
+#else
+#define l3_noc_match NULL
+#endif
+
 static struct platform_driver omap4_l3_driver = {
-	.remove	= __exit_p(omap4_l3_remove),
+	.probe		= omap4_l3_probe,
+	.remove		= __devexit_p(omap4_l3_remove),
 	.driver		= {
 		.name		= "omap_l3_noc",
+		.owner		= THIS_MODULE,
+		.of_match_table = l3_noc_match,
 	},
 };
 
 static int __init omap4_l3_init(void)
 {
-	return platform_driver_probe(&omap4_l3_driver, omap4_l3_probe);
+	return platform_driver_register(&omap4_l3_driver);
 }
 postcore_initcall_sync(omap4_l3_init);
 

arch/arm/mach-omap2/pm.c

@@ -26,38 +26,7 @@
 
 static struct omap_device_pm_latency *pm_lats;
 
-static struct device *mpu_dev;
-static struct device *iva_dev;
-static struct device *l3_dev;
-static struct device *dsp_dev;
-
-struct device *omap2_get_mpuss_device(void)
-{
-	WARN_ON_ONCE(!mpu_dev);
-	return mpu_dev;
-}
-
-struct device *omap2_get_iva_device(void)
-{
-	WARN_ON_ONCE(!iva_dev);
-	return iva_dev;
-}
-
-struct device *omap2_get_l3_device(void)
-{
-	WARN_ON_ONCE(!l3_dev);
-	return l3_dev;
-}
-
-struct device *omap4_get_dsp_device(void)
-{
-	WARN_ON_ONCE(!dsp_dev);
-	return dsp_dev;
-}
-EXPORT_SYMBOL(omap4_get_dsp_device);
-
-/* static int _init_omap_device(struct omap_hwmod *oh, void *user) */
-static int _init_omap_device(char *name, struct device **new_dev)
+static int _init_omap_device(char *name)
 {
 	struct omap_hwmod *oh;
 	struct platform_device *pdev;
@@ -72,8 +41,6 @@ static int _init_omap_device(char *name, struct device **new_dev)
 		 __func__, name))
 		return -ENODEV;
 
-	*new_dev = &pdev->dev;
-
 	return 0;
 }
 
@@ -82,16 +49,16 @@ static int _init_omap_device(char *name, struct device **new_dev)
  */
 static void omap2_init_processor_devices(void)
 {
-	_init_omap_device("mpu", &mpu_dev);
+	_init_omap_device("mpu");
 	if (omap3_has_iva())
-		_init_omap_device("iva", &iva_dev);
+		_init_omap_device("iva");
 
 	if (cpu_is_omap44xx()) {
-		_init_omap_device("l3_main_1", &l3_dev);
-		_init_omap_device("dsp", &dsp_dev);
-		_init_omap_device("iva", &iva_dev);
+		_init_omap_device("l3_main_1");
+		_init_omap_device("dsp");
+		_init_omap_device("iva");
 	} else {
-		_init_omap_device("l3_main", &l3_dev);
+		_init_omap_device("l3_main");
 	}
 }
 
@@ -169,18 +136,26 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
  * in the opp entry
  */
 static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
-						struct device *dev)
+					 const char *oh_name)
 {
 	struct voltagedomain *voltdm;
 	struct clk *clk;
 	struct opp *opp;
 	unsigned long freq, bootup_volt;
+	struct device *dev;
 
-	if (!vdd_name || !clk_name || !dev) {
+	if (!vdd_name || !clk_name || !oh_name) {
 		pr_err("%s: invalid parameters\n", __func__);
 		goto exit;
 	}
 
+	dev = omap_device_get_by_hwmod_name(oh_name);
+	if (IS_ERR(dev)) {
+		pr_err("%s: Unable to get dev pointer for hwmod %s\n",
+			__func__, oh_name);
+		goto exit;
+	}
+
 	voltdm = voltdm_lookup(vdd_name);
 	if (IS_ERR(voltdm)) {
 		pr_err("%s: unable to get vdd pointer for vdd_%s\n",
@@ -224,8 +199,8 @@ static void __init omap3_init_voltages(void)
 	if (!cpu_is_omap34xx())
 		return;
 
-	omap2_set_init_voltage("mpu_iva", "dpll1_ck", mpu_dev);
-	omap2_set_init_voltage("core", "l3_ick", l3_dev);
+	omap2_set_init_voltage("mpu_iva", "dpll1_ck", "mpu");
+	omap2_set_init_voltage("core", "l3_ick", "l3_main");
 }
 
 static void __init omap4_init_voltages(void)
@@ -233,13 +208,14 @@ static void __init omap4_init_voltages(void)
 	if (!cpu_is_omap44xx())
 		return;
 
-	omap2_set_init_voltage("mpu", "dpll_mpu_ck", mpu_dev);
-	omap2_set_init_voltage("core", "l3_div_ck", l3_dev);
-	omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", iva_dev);
+	omap2_set_init_voltage("mpu", "dpll_mpu_ck", "mpu");
+	omap2_set_init_voltage("core", "l3_div_ck", "l3_main_1");
+	omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva");
 }
 
 static int __init omap2_common_pm_init(void)
 {
+	if (!of_have_populated_dt())
 		omap2_init_processor_devices();
 	omap_pm_if_init();
 

arch/arm/mach-omap2/serial.c

@@ -107,28 +107,6 @@ struct omap_uart_state {
 static LIST_HEAD(uart_list);
 static u8 num_uarts;
 
-static int uart_idle_hwmod(struct omap_device *od)
-{
-	omap_hwmod_idle(od->hwmods[0]);
-
-	return 0;
-}
-
-static int uart_enable_hwmod(struct omap_device *od)
-{
-	omap_hwmod_enable(od->hwmods[0]);
-
-	return 0;
-}
-
-static struct omap_device_pm_latency omap_uart_latency[] = {
-	{
-		.deactivate_func = uart_idle_hwmod,
-		.activate_func	 = uart_enable_hwmod,
-		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static inline unsigned int __serial_read_reg(struct uart_port *up,
 					     int offset)
 {
@@ -800,8 +778,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
 		return;
 
 	pdev = omap_device_build(name, uart->num, oh, pdata, pdata_size,
-			       omap_uart_latency,
-			       ARRAY_SIZE(omap_uart_latency), false);
+				 NULL, 0, false);
 	WARN(IS_ERR(pdev), "Could not build omap_device for %s: %s.\n",
 	     name, oh->name);
 

arch/arm/mach-omap2/sr_device.c

@@ -31,14 +31,6 @@
 
 static bool sr_enable_on_init;
 
-static struct omap_device_pm_latency omap_sr_latency[] = {
-	{
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func	 = omap_device_enable_hwmods,
-		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST
-	},
-};
-
 /* Read EFUSE values from control registers for OMAP3430 */
 static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 				struct omap_sr_data *sr_data)
@@ -121,8 +113,7 @@ static int sr_dev_init(struct omap_hwmod *oh, void *user)
 	sr_data->enable_on_init = sr_enable_on_init;
 
 	pdev = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data),
-			       omap_sr_latency,
-			       ARRAY_SIZE(omap_sr_latency), 0);
+				 NULL, 0, 0);
 	if (IS_ERR(pdev))
 		pr_warning("%s: Could not build omap_device for %s: %s.\n\n",
 			__func__, name, oh->name);

arch/arm/mach-omap2/usb-musb.c

@@ -60,14 +60,6 @@ static struct musb_hdrc_platform_data musb_plat = {
 
 static u64 musb_dmamask = DMA_BIT_MASK(32);
 
-static struct omap_device_pm_latency omap_musb_latency[] = {
-	{
-		.deactivate_func	= omap_device_idle_hwmods,
-		.activate_func		= omap_device_enable_hwmods,
-		.flags			= OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static void usb_musb_mux_init(struct omap_musb_board_data *board_data)
 {
 	switch (board_data->interface_type) {
@@ -150,8 +142,7 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
                 return;
 
 	pdev = omap_device_build(name, bus_id, oh, &musb_plat,
-			       sizeof(musb_plat), omap_musb_latency,
-			       ARRAY_SIZE(omap_musb_latency), false);
+			       sizeof(musb_plat), NULL, 0, false);
 	if (IS_ERR(pdev)) {
 		pr_err("Could not build omap_device for %s %s\n",
 						name, oh_name);

arch/arm/plat-omap/i2c.c

@@ -123,14 +123,6 @@ static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t)
 	omap_pm_set_max_mpu_wakeup_lat(dev, t);
 }
 
-static struct omap_device_pm_latency omap_i2c_latency[] = {
-	[0] = {
-		.deactivate_func	= omap_device_idle_hwmods,
-		.activate_func		= omap_device_enable_hwmods,
-		.flags			= OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static inline int omap2_i2c_add_bus(int bus_id)
 {
 	int l;
@@ -162,7 +154,7 @@ static inline int omap2_i2c_add_bus(int bus_id)
 		pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
 	pdev = omap_device_build(name, bus_id, oh, pdata,
 			sizeof(struct omap_i2c_bus_platform_data),
-			omap_i2c_latency, ARRAY_SIZE(omap_i2c_latency), 0);
+			NULL, 0, 0);
 	WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
 
 	return PTR_ERR(pdev);

arch/arm/plat-omap/include/plat/omap_device.h

@@ -101,6 +101,7 @@ struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
 					 int pm_lats_cnt, int is_early_device);
 
 void __iomem *omap_device_get_rt_va(struct omap_device *od);
+struct device *omap_device_get_by_hwmod_name(const char *oh_name);
 
 /* OMAP PM interface */
 int omap_device_align_pm_lat(struct platform_device *pdev,

drivers/of/base.c

@@ -661,6 +661,90 @@ int of_property_read_string(struct device_node *np, const char *propname,
 }
 EXPORT_SYMBOL_GPL(of_property_read_string);
 
+/**
+ * of_property_read_string_index - Find and read a string from a multiple
+ * strings property.
+ * @np:		device node from which the property value is to be read.
+ * @propname:	name of the property to be searched.
+ * @index:	index of the string in the list of strings
+ * @out_string:	pointer to null terminated return string, modified only if
+ *		return value is 0.
+ *
+ * Search for a property in a device tree node and retrieve a null
+ * terminated string value (pointer to data, not a copy) in the list of strings
+ * contained in that property.
+ * Returns 0 on success, -EINVAL if the property does not exist, -ENODATA if
+ * property does not have a value, and -EILSEQ if the string is not
+ * null-terminated within the length of the property data.
+ *
+ * The out_string pointer is modified only if a valid string can be decoded.
+ */
+int of_property_read_string_index(struct device_node *np, const char *propname,
+				  int index, const char **output)
+{
+	struct property *prop = of_find_property(np, propname, NULL);
+	int i = 0;
+	size_t l = 0, total = 0;
+	const char *p;
+
+	if (!prop)
+		return -EINVAL;
+	if (!prop->value)
+		return -ENODATA;
+	if (strnlen(prop->value, prop->length) >= prop->length)
+		return -EILSEQ;
+
+	p = prop->value;
+
+	for (i = 0; total < prop->length; total += l, p += l) {
+		l = strlen(p) + 1;
+		if ((*p != 0) && (i++ == index)) {
+			*output = p;
+			return 0;
+		}
+	}
+	return -ENODATA;
+}
+EXPORT_SYMBOL_GPL(of_property_read_string_index);
+
+
+/**
+ * of_property_count_strings - Find and return the number of strings from a
+ * multiple strings property.
+ * @np:		device node from which the property value is to be read.
+ * @propname:	name of the property to be searched.
+ *
+ * Search for a property in a device tree node and retrieve the number of null
+ * terminated string contain in it. Returns the number of strings on
+ * success, -EINVAL if the property does not exist, -ENODATA if property
+ * does not have a value, and -EILSEQ if the string is not null-terminated
+ * within the length of the property data.
+ */
+int of_property_count_strings(struct device_node *np, const char *propname)
+{
+	struct property *prop = of_find_property(np, propname, NULL);
+	int i = 0;
+	size_t l = 0, total = 0;
+	const char *p;
+
+	if (!prop)
+		return -EINVAL;
+	if (!prop->value)
+		return -ENODATA;
+	if (strnlen(prop->value, prop->length) >= prop->length)
+		return -EILSEQ;
+
+	p = prop->value;
+
+	for (i = 0; total < prop->length; total += l, p += l) {
+		l = strlen(p) + 1;
+		if (*p != 0)
+			i++;
+	}
+	return i;
+}
+EXPORT_SYMBOL_GPL(of_property_count_strings);
+
 /**
  * of_parse_phandle - Resolve a phandle property to a device_node pointer
  * @np: Pointer to device node holding phandle property

include/linux/of.h

@@ -203,6 +203,11 @@ extern int of_property_read_u32_array(const struct device_node *np,
 extern int of_property_read_string(struct device_node *np,
 				   const char *propname,
 				   const char **out_string);
+extern int of_property_read_string_index(struct device_node *np,
+					 const char *propname,
+					 int index, const char **output);
+extern int of_property_count_strings(struct device_node *np,
+				     const char *propname);
 extern int of_device_is_compatible(const struct device_node *device,
 				   const char *);
 extern int of_device_is_available(const struct device_node *device);
@@ -256,6 +261,19 @@ static inline int of_property_read_string(struct device_node *np,
 	return -ENOSYS;
 }
 
+static inline int of_property_read_string_index(struct device_node *np,
+						const char *propname, int index,
+						const char **out_string)
+{
+	return -ENOSYS;
+}
+
+static inline int of_property_count_strings(struct device_node *np,
+					    const char *propname)
+{
+	return -ENOSYS;
+}
+
 static inline const void *of_get_property(const struct device_node *node,
 				const char *name,
 				int *lenp)