Skip to content

L
linux
Commit 3c06c283 authored by Dan Williams's avatar Dan Williams
Browse files
Options

isci: clean up remaining silicon revision ifdefs in phy init 

Use the dynamic revision detection code in
scic_sds_phy_link_layer_initialization() and apply some coding style
fixups (long deref chains).  The compile time max link rate setting is
removed in favor of honoring the user-parameter max.
Reported-by: default avatarKrzysztof Wierzbicki <Krzysztof.Wierzbicki@intel.com>
Signed-off-by: default avatarDan Williams <dan.j.williams@intel.com>
parent d9def184
Show whitespace changes
Inline Side-by-side
Showing with 85 additions and 121 deletions
drivers/scsi/isci/core/scic_config_parameters.h
View file @ 3c06c283
......@@ -114,7 +114,7 @@ struct scic_sds_controller;
*
*/
struct scic_sds_user_parameters {
struct {
struct sci_phy_user_params {
/**
* This field specifies the NOTIFY (ENABLE SPIN UP) primitive
* insertion frequency for this phy index.
......@@ -250,7 +250,7 @@ struct scic_sds_oem_parameters {
} ports[SCI_MAX_PORTS];
struct {
struct sci_phy_oem_params {
/**
* This field specifies the SAS address to be transmitted on
* for this phy index.
......
drivers/scsi/isci/core/scic_sds_controller.c
View file @ 3c06c283
......@@ -584,21 +584,6 @@ void scic_sds_controller_enable_port_task_scheduler(
*/
#define AFE_REGISTER_WRITE_DELAY 10
static bool is_a0(void)
{
return isci_si_rev == ISCI_SI_REVA0;
}
static bool is_a2(void)
{
return isci_si_rev == ISCI_SI_REVA2;
}
static bool is_b0(void)
{
return isci_si_rev > ISCI_SI_REVA2;
}
/* Initialize the AFE for this phy index. We need to read the AFE setup from
* the OEM parameters none
*/
......
drivers/scsi/isci/core/scic_sds_phy.c
View file @ 3c06c283
......@@ -111,62 +111,55 @@ static enum sci_status scic_sds_phy_transport_layer_initialization(
/**
* This method will initialize the phy link layer registers
* @this_phy:
* @sci_phy:
* @link_layer_registers:
*
* enum sci_status
*/
static enum sci_status scic_sds_phy_link_layer_initialization(
struct scic_sds_phy *this_phy,
static enum sci_status
scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy,
struct scu_link_layer_registers __iomem *link_layer_registers)
{
struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller;
int phy_idx = sci_phy->phy_index;
struct sci_phy_user_params *phy_user = &scic->user_parameters.sds1.phys[phy_idx];
struct sci_phy_oem_params *phy_oem = &scic->oem_parameters.sds1.phys[phy_idx];
u32 phy_configuration;
struct sas_capabilities phy_capabilities;
u32 parity_check = 0;
u32 parity_count = 0;
u32 link_layer_control;
u32 llctl, link_rate;
u32 clksm_value = 0;
this_phy->link_layer_registers = link_layer_registers;
sci_phy->link_layer_registers = link_layer_registers;
/* Set our IDENTIFY frame data */
#define SCI_END_DEVICE 0x01
SCU_SAS_TIID_WRITE(
this_phy,
(SCU_SAS_TIID_GEN_BIT(SMP_INITIATOR)
| SCU_SAS_TIID_GEN_BIT(SSP_INITIATOR)
| SCU_SAS_TIID_GEN_BIT(STP_INITIATOR)
| SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST)
| SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE))
);
SCU_SAS_TIID_WRITE(sci_phy, (SCU_SAS_TIID_GEN_BIT(SMP_INITIATOR) |
SCU_SAS_TIID_GEN_BIT(SSP_INITIATOR) |
SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) |
SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) |
SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE)));
/* Write the device SAS Address */
SCU_SAS_TIDNH_WRITE(this_phy, 0xFEDCBA98);
SCU_SAS_TIDNL_WRITE(this_phy, this_phy->phy_index);
SCU_SAS_TIDNH_WRITE(sci_phy, 0xFEDCBA98);
SCU_SAS_TIDNL_WRITE(sci_phy, phy_idx);
/* Write the source SAS Address */
SCU_SAS_TISSAH_WRITE(
this_phy,
this_phy->owning_port->owning_controller->oem_parameters.sds1.phys[
this_phy->phy_index].sas_address.high
);
SCU_SAS_TISSAL_WRITE(
this_phy,
this_phy->owning_port->owning_controller->oem_parameters.sds1.phys[
this_phy->phy_index].sas_address.low
);
SCU_SAS_TISSAH_WRITE(sci_phy, phy_oem->sas_address.high);
SCU_SAS_TISSAL_WRITE(sci_phy, phy_oem->sas_address.low);
/* Clear and Set the PHY Identifier */
SCU_SAS_TIPID_WRITE(this_phy, 0x00000000);
SCU_SAS_TIPID_WRITE(this_phy, SCU_SAS_TIPID_GEN_VALUE(ID, this_phy->phy_index));
SCU_SAS_TIPID_WRITE(sci_phy, 0x00000000);
SCU_SAS_TIPID_WRITE(sci_phy, SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx));
/* Change the initial state of the phy configuration register */
phy_configuration = SCU_SAS_PCFG_READ(this_phy);
phy_configuration = SCU_SAS_PCFG_READ(sci_phy);
/* Hold OOB state machine in reset */
phy_configuration |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
SCU_SAS_PCFG_WRITE(this_phy, phy_configuration);
SCU_SAS_PCFG_WRITE(sci_phy, phy_configuration);
/* Configure the SNW capabilities */
phy_capabilities.u.all = 0;
......@@ -174,8 +167,7 @@ static enum sci_status scic_sds_phy_link_layer_initialization(
phy_capabilities.u.bits.gen3_without_ssc_supported = 1;
phy_capabilities.u.bits.gen2_without_ssc_supported = 1;
phy_capabilities.u.bits.gen1_without_ssc_supported = 1;
if (this_phy->owning_port->owning_controller->oem_parameters.sds1.
controller.do_enable_ssc == true) {
if (scic->oem_parameters.sds1.controller.do_enable_ssc == true) {
phy_capabilities.u.bits.gen3_with_ssc_supported = 1;
phy_capabilities.u.bits.gen2_with_ssc_supported = 1;
phy_capabilities.u.bits.gen1_with_ssc_supported = 1;
......@@ -197,93 +189,66 @@ static enum sci_status scic_sds_phy_link_layer_initialization(
if ((parity_count % 2) != 0)
phy_capabilities.u.bits.parity = 1;
SCU_SAS_PHYCAP_WRITE(this_phy, phy_capabilities.u.all);
SCU_SAS_PHYCAP_WRITE(sci_phy, phy_capabilities.u.all);
/* Set the enable spinup period but disable the ability to send notify enable spinup */
SCU_SAS_ENSPINUP_WRITE(this_phy, SCU_ENSPINUP_GEN_VAL(COUNT,
this_phy->owning_port->owning_controller->user_parameters.sds1.
phys[this_phy->phy_index].notify_enable_spin_up_insertion_frequency));
/* Set the enable spinup period but disable the ability to send
* notify enable spinup
*/
SCU_SAS_ENSPINUP_WRITE(sci_phy, SCU_ENSPINUP_GEN_VAL(COUNT,
phy_user->notify_enable_spin_up_insertion_frequency));
/* Write the ALIGN Insertion Ferequency for connected phy and inpendent of connected state */
/* Write the ALIGN Insertion Ferequency for connected phy and
* inpendent of connected state
*/
clksm_value = SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(CONNECTED,
this_phy->owning_port->owning_controller->user_parameters.sds1.
phys[this_phy->phy_index].in_connection_align_insertion_frequency);
phy_user->in_connection_align_insertion_frequency);
clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL,
this_phy->owning_port->owning_controller->user_parameters.sds1.
phys[this_phy->phy_index].align_insertion_frequency);
SCU_SAS_CLKSM_WRITE(this_phy, clksm_value);
#if defined(CONFIG_PBG_HBA_A0) || defined(CONFIG_PBG_HBA_A2) || defined(CONFIG_PBG_HBA_BETA)
/* / @todo Provide a way to write this register correctly */
scu_link_layer_register_write(this_phy, afe_lookup_table_control, 0x02108421);
#else
/* / @todo Provide a way to write this register correctly */
scu_link_layer_register_write(this_phy, afe_lookup_table_control, 0x0e739ce7);
#endif
link_layer_control = SCU_SAS_LLCTL_GEN_VAL(
NO_OUTBOUND_TASK_TIMEOUT,
(u8)this_phy->owning_port->owning_controller->
user_parameters.sds1.no_outbound_task_timeout
);
phy_user->align_insertion_frequency);
/* #define COMPILED_MAX_LINK_RATE SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1 */
/* #define COMPILED_MAX_LINK_RATE SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2 */
#define COMPILED_MAX_LINK_RATE SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3
SCU_SAS_CLKSM_WRITE(sci_phy, clksm_value);
if (this_phy->owning_port->owning_controller->user_parameters.sds1.
phys[this_phy->phy_index].max_speed_generation == SCIC_SDS_PARM_GEN3_SPEED) {
link_layer_control |= SCU_SAS_LLCTL_GEN_VAL(
MAX_LINK_RATE, COMPILED_MAX_LINK_RATE
);
} else if (this_phy->owning_port->owning_controller->user_parameters.sds1.
phys[this_phy->phy_index].max_speed_generation == SCIC_SDS_PARM_GEN2_SPEED) {
link_layer_control |= SCU_SAS_LLCTL_GEN_VAL(
MAX_LINK_RATE,
min(
SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2,
COMPILED_MAX_LINK_RATE)
);
} else {
link_layer_control |= SCU_SAS_LLCTL_GEN_VAL(
MAX_LINK_RATE,
min(
SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1,
COMPILED_MAX_LINK_RATE)
);
/* @todo Provide a way to write this register correctly */
scu_link_layer_register_write(sci_phy, afe_lookup_table_control, 0x02108421);
llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT,
(u8)scic->user_parameters.sds1.no_outbound_task_timeout);
switch(phy_user->max_speed_generation) {
case SCIC_SDS_PARM_GEN3_SPEED:
link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3;
break;
case SCIC_SDS_PARM_GEN2_SPEED:
link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2;
break;
default:
link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1;
break;
}
llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate);
scu_link_layer_register_write(
this_phy, link_layer_control, link_layer_control
);
scu_link_layer_register_write(sci_phy, link_layer_control, llctl);
/*
* Program the max ARB time for the PHY to 700us so we inter-operate with
if (is_a0() || is_a2()) {
/* Program the max ARB time for the PHY to 700us so we inter-operate with
* the PMC expander which shuts down PHYs if the expander PHY generates too
* many breaks. This time value will guarantee that the initiator PHY will
* generate the break. */
#if defined(CONFIG_PBG_HBA_A0) || defined(CONFIG_PBG_HBA_A2)
scu_link_layer_register_write(
this_phy,
* generate the break.
*/
scu_link_layer_register_write(sci_phy,
maximum_arbitration_wait_timer_timeout,
SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME
);
#endif /* defined(CONFIG_PBG_HBA_A0) || defined(CONFIG_PBG_HBA_A2) */
SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME);
}
/*
* Set the link layer hang detection to 500ms (0x1F4) from its default
* value of 128ms. Max value is 511 ms. */
scu_link_layer_register_write(
this_phy, link_layer_hang_detection_timeout, 0x1F4
);
scu_link_layer_register_write(sci_phy, link_layer_hang_detection_timeout,
0x1F4);
/* We can exit the initial state to the stopped state */
sci_base_state_machine_change_state(
scic_sds_phy_get_base_state_machine(this_phy),
SCI_BASE_PHY_STATE_STOPPED
);
sci_base_state_machine_change_state(scic_sds_phy_get_base_state_machine(sci_phy),
SCI_BASE_PHY_STATE_STOPPED);
return SCI_SUCCESS;
}
......
drivers/scsi/isci/sci_environment.h
View file @ 3c06c283
......@@ -108,5 +108,19 @@ enum {
extern int isci_si_rev;
static inline bool is_a0(void)
{
return isci_si_rev == ISCI_SI_REVA0;
}
static inline bool is_a2(void)
{
return isci_si_rev == ISCI_SI_REVA2;
}
static inline bool is_b0(void)
{
return isci_si_rev > ISCI_SI_REVA2;
}
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7