Commit 3c8a3ad4 authored by Srinivasa Rao Mandadapu's avatar Srinivasa Rao Mandadapu Committed by Mark Brown

ASoC: codecs: MBHC: Add support for special headset

Update MBHC driver to support special headset such as apple
and huwawei headsets.
Signed-off-by: default avatarSrinivasa Rao Mandadapu <srivasam@codeaurora.org>
Co-developed-by: default avatarVenkata Prasad Potturu <potturu@codeaurora.org>
Signed-off-by: default avatarVenkata Prasad Potturu <potturu@codeaurora.org>
Reviewed-by: default avatarSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1636960288-27537-1-git-send-email-srivasam@codeaurora.orgSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent 5b59289b
......@@ -1022,6 +1022,56 @@ static int wcd_mbhc_get_plug_from_adc(struct wcd_mbhc *mbhc, int adc_result)
return plug_type;
}
static int wcd_mbhc_get_spl_hs_thres(struct wcd_mbhc *mbhc)
{
int hs_threshold, micbias_mv;
micbias_mv = wcd_mbhc_get_micbias(mbhc);
if (mbhc->cfg->hs_thr && mbhc->cfg->micb_mv != WCD_MBHC_ADC_MICBIAS_MV) {
if (mbhc->cfg->micb_mv == micbias_mv)
hs_threshold = mbhc->cfg->hs_thr;
else
hs_threshold = (mbhc->cfg->hs_thr * micbias_mv) / mbhc->cfg->micb_mv;
} else {
hs_threshold = ((WCD_MBHC_ADC_HS_THRESHOLD_MV * micbias_mv) /
WCD_MBHC_ADC_MICBIAS_MV);
}
return hs_threshold;
}
static bool wcd_mbhc_check_for_spl_headset(struct wcd_mbhc *mbhc)
{
bool is_spl_hs = false;
int output_mv, hs_threshold, hph_threshold;
if (!mbhc->mbhc_cb->mbhc_micb_ctrl_thr_mic)
return false;
/* Bump up MIC_BIAS2 to 2.7V */
mbhc->mbhc_cb->mbhc_micb_ctrl_thr_mic(mbhc->component, MIC_BIAS_2, true);
usleep_range(10000, 10100);
output_mv = wcd_measure_adc_once(mbhc, MUX_CTL_IN2P);
hs_threshold = wcd_mbhc_get_spl_hs_thres(mbhc);
hph_threshold = wcd_mbhc_adc_get_hph_thres(mbhc);
if (output_mv > hs_threshold || output_mv < hph_threshold) {
if (mbhc->force_linein == true)
is_spl_hs = false;
} else {
is_spl_hs = true;
}
/* Back MIC_BIAS2 to 1.8v if the type is not special headset */
if (!is_spl_hs) {
mbhc->mbhc_cb->mbhc_micb_ctrl_thr_mic(mbhc->component, MIC_BIAS_2, false);
/* Add 10ms delay for micbias to settle */
usleep_range(10000, 10100);
}
return is_spl_hs;
}
static void wcd_correct_swch_plug(struct work_struct *work)
{
struct wcd_mbhc *mbhc;
......@@ -1029,12 +1079,14 @@ static void wcd_correct_swch_plug(struct work_struct *work)
enum wcd_mbhc_plug_type plug_type = MBHC_PLUG_TYPE_INVALID;
unsigned long timeout;
int pt_gnd_mic_swap_cnt = 0;
int output_mv, cross_conn, hs_threshold, try = 0;
int output_mv, cross_conn, hs_threshold, try = 0, micbias_mv;
bool is_spl_hs = false;
bool is_pa_on;
mbhc = container_of(work, struct wcd_mbhc, correct_plug_swch);
component = mbhc->component;
micbias_mv = wcd_mbhc_get_micbias(mbhc);
hs_threshold = wcd_mbhc_adc_get_hs_thres(mbhc);
/* Mask ADC COMPLETE interrupt */
......@@ -1097,6 +1149,16 @@ static void wcd_correct_swch_plug(struct work_struct *work)
plug_type = wcd_mbhc_get_plug_from_adc(mbhc, output_mv);
is_pa_on = wcd_mbhc_read_field(mbhc, WCD_MBHC_HPH_PA_EN);
if ((output_mv > hs_threshold) && (!is_spl_hs)) {
is_spl_hs = wcd_mbhc_check_for_spl_headset(mbhc);
output_mv = wcd_measure_adc_once(mbhc, MUX_CTL_IN2P);
if (is_spl_hs) {
hs_threshold = (hs_threshold * wcd_mbhc_get_micbias(mbhc)) /
micbias_mv;
}
}
if ((output_mv <= hs_threshold) && !is_pa_on) {
/* Check for cross connection*/
cross_conn = wcd_check_cross_conn(mbhc);
......@@ -1122,14 +1184,19 @@ static void wcd_correct_swch_plug(struct work_struct *work)
}
}
if (output_mv > hs_threshold) /* cable is extension cable */
/* cable is extension cable */
if (output_mv > hs_threshold || mbhc->force_linein == true)
plug_type = MBHC_PLUG_TYPE_HIGH_HPH;
}
wcd_mbhc_bcs_enable(mbhc, plug_type, true);
if (plug_type == MBHC_PLUG_TYPE_HIGH_HPH)
if (plug_type == MBHC_PLUG_TYPE_HIGH_HPH) {
if (is_spl_hs)
plug_type = MBHC_PLUG_TYPE_HEADSET;
else
wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_ISRC_EN, 1);
}
wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_MODE, 0);
wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, 0);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment