Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3927/1: Allow show_mem() to work with holes in memory map.
  [ARM] 3926/1: make timer led handle HZ != 100
  [ARM] 3923/1: S3C24XX: update s3c2410_defconfig with new drivers
  [ARM] 3922/1: S3C24XX: update s3c2410_defconfig to 2.6.19-rc4
  [ARM] 3921/1: S3C24XX: remove bast_defconfig
  [ARM] 3920/1: S3C24XX: Remove smdk2410_defconfig
  [ARM] 3919/1: Fixed definition of some PXA270 CIF related registers
  [ARM] 3918/1: ixp4xx irq-chip rework
  [ARM] 3912/1: Make PXA270 advertise HWCAP_IWMMXT capability
  [ARM] 3915/1: S3C2412: Add s3c2410_gpio_getirq() to general gpio.c
  [ARM] 3917/1: Fix dmabounce symbol exports

arch/arm/common/dmabounce.c

@@ -662,7 +662,8 @@ EXPORT_SYMBOL(dma_map_single);
 EXPORT_SYMBOL(dma_unmap_single);
 EXPORT_SYMBOL(dma_map_sg);
 EXPORT_SYMBOL(dma_unmap_sg);
-EXPORT_SYMBOL(dma_sync_single);
+EXPORT_SYMBOL(dma_sync_single_for_cpu);
+EXPORT_SYMBOL(dma_sync_single_for_device);
 EXPORT_SYMBOL(dma_sync_sg);
 EXPORT_SYMBOL(dmabounce_register_dev);
 EXPORT_SYMBOL(dmabounce_unregister_dev);

arch/arm/configs/s3c2410_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Wed Sep 20 20:27:31 2006
+# Linux kernel version: 2.6.19-rc4
+# Fri Nov  3 17:41:31 2006
 #
 CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -29,17 +30,20 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -62,7 +66,8 @@ CONFIG_BASE_SMALL=0
 # Loadable module support
 #
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
@@ -70,6 +75,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
@@ -120,6 +126,7 @@ CONFIG_ARCH_S3C2410=y
 #
 # S3C24XX Implementations
 #
+# CONFIG_MACH_AML_M5900 is not set
 CONFIG_MACH_ANUBIS=y
 CONFIG_MACH_OSIRIS=y
 CONFIG_ARCH_BAST=y
@@ -178,6 +185,8 @@ CONFIG_CPU_CACHE_V4WT=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
@@ -251,6 +260,7 @@ CONFIG_BINFMT_AOUT=y
 CONFIG_PM=y
 CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
 CONFIG_APM=y
 
 #
@@ -266,6 +276,7 @@ CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -286,10 +297,12 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -377,6 +390,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -418,6 +432,8 @@ CONFIG_MTD_BAST_MAXSIZE=4
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -512,6 +528,7 @@ CONFIG_BLK_DEV_IDE_BAST=y
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -606,6 +623,7 @@ CONFIG_DM9000=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -628,6 +646,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 # CONFIG_MOUSE_SERIAL is not set
@@ -734,7 +753,6 @@ CONFIG_S3C2410_WATCHDOG=y
 # CONFIG_USBPCWATCHDOG is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
-CONFIG_S3C2410_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
@@ -747,7 +765,6 @@ CONFIG_S3C2410_RTC=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -792,12 +809,26 @@ CONFIG_SENSORS_EEPROM=m
 #
 # SPI support
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=m
+# CONFIG_SPI_BUTTERFLY is not set
+CONFIG_SPI_S3C24XX_GPIO=m
+CONFIG_SPI_S3C24XX=m
+
+#
+# SPI Protocol Masters
+#
 
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -820,6 +851,7 @@ CONFIG_HWMON_VID=m
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
 CONFIG_SENSORS_LM75=m
 # CONFIG_SENSORS_LM77 is not set
 CONFIG_SENSORS_LM78=m
@@ -834,6 +866,7 @@ CONFIG_SENSORS_LM85=m
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
@@ -845,25 +878,31 @@ CONFIG_SENSORS_LM85=m
 #
 # Misc devices
 #
+# CONFIG_TIFM_CORE is not set
 
 #
 # LED devices
 #
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
 
 #
 # LED drivers
 #
+CONFIG_LEDS_S3C24XX=m
 
 #
 # LED Triggers
 #
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -876,6 +915,7 @@ CONFIG_VIDEO_V4L2=y
 #
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB=y
+# CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -951,7 +991,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # may also be needed; see USB_STORAGE Help for more information
 #
-# CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1007,6 +1046,7 @@ CONFIG_USB_MON=y
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
@@ -1014,11 +1054,12 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -1039,7 +1080,37 @@ CONFIG_USB_MON=y
 # Real Time Clock
 #
 CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+CONFIG_RTC_DRV_S3C=y
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
 # File systems
@@ -1051,6 +1122,7 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -1058,6 +1130,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=y
@@ -1089,6 +1162,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
@@ -1219,6 +1293,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
@@ -1238,9 +1313,10 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
 CONFIG_FORCED_INLINING=y
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_WAITQ is not set
@@ -1261,10 +1337,6 @@ CONFIG_DEBUG_S3C2410_UART=0
 #
 # CONFIG_CRYPTO is not set
 
-#
-# Hardware crypto devices
-#
-
 #
 # Library routines
 #

arch/arm/kernel/setup.c

@@ -357,6 +357,9 @@ static void __init setup_processor(void)
 #ifndef CONFIG_VFP
 	elf_hwcap &= ~HWCAP_VFP;
 #endif
+#ifndef CONFIG_IWMMXT
+	elf_hwcap &= ~HWCAP_IWMMXT;
+#endif
 
 	cpu_proc_init();
 }
@@ -854,6 +857,7 @@ static const char *hwcap_str[] = {
 	"vfp",
 	"edsp",
 	"java",
+	"iwmmxt",
 	NULL
 };
 

arch/arm/kernel/time.c

@@ -220,10 +220,10 @@ EXPORT_SYMBOL(leds_event);
 #ifdef CONFIG_LEDS_TIMER
 static inline void do_leds(void)
 {
-	static unsigned int count = 50;
+	static unsigned int count = HZ/2;
 
 	if (--count == 0) {
-		count = 50;
+		count = HZ/2;
 		leds_event(led_timer);
 	}
 }

arch/arm/mach-ixp4xx/common.c

@@ -86,7 +86,8 @@ enum ixp4xx_irq_type {
 	IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE
 };
 
-static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type);
+/* Each bit represents an IRQ: 1: edge-triggered, 0: level triggered */
+static unsigned long long ixp4xx_irq_edge = 0;
 
 /*
  * IRQ -> GPIO mapping table
@@ -135,7 +136,11 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
 	default:
 		return -EINVAL;
 	}
-	ixp4xx_config_irq(irq, irq_type);
+
+	if (irq_type == IXP4XX_IRQ_EDGE)
+		ixp4xx_irq_edge |= (1 << irq);
+	else
+		ixp4xx_irq_edge &= ~(1 << irq);
 
 	if (line >= 8) {	/* pins 8-15 */
 		line -= 8;
@@ -167,14 +172,6 @@ static void ixp4xx_irq_mask(unsigned int irq)
 		*IXP4XX_ICMR &= ~(1 << irq);
 }
 
-static void ixp4xx_irq_unmask(unsigned int irq)
-{
-	if (cpu_is_ixp46x() && irq >= 32)
-		*IXP4XX_ICMR2 |= (1 << (irq - 32));
-	else
-		*IXP4XX_ICMR |= (1 << irq);
-}
-
 static void ixp4xx_irq_ack(unsigned int irq)
 {
 	int line = (irq < 32) ? irq2gpio[irq] : -1;
@@ -187,41 +184,25 @@ static void ixp4xx_irq_ack(unsigned int irq)
  * Level triggered interrupts on GPIO lines can only be cleared when the
  * interrupt condition disappears.
  */
-static void ixp4xx_irq_level_unmask(unsigned int irq)
+static void ixp4xx_irq_unmask(unsigned int irq)
 {
+	if (!(ixp4xx_irq_edge & (1 << irq)))
 		ixp4xx_irq_ack(irq);
-	ixp4xx_irq_unmask(irq);
-}
 
-static struct irqchip ixp4xx_irq_level_chip = {
-	.ack		= ixp4xx_irq_mask,
-	.mask		= ixp4xx_irq_mask,
-	.unmask		= ixp4xx_irq_level_unmask,
-	.set_type	= ixp4xx_set_irq_type,
-};
+	if (cpu_is_ixp46x() && irq >= 32)
+		*IXP4XX_ICMR2 |= (1 << (irq - 32));
+	else
+		*IXP4XX_ICMR |= (1 << irq);
+}
 
-static struct irqchip ixp4xx_irq_edge_chip = {
+static struct irqchip ixp4xx_irq_chip = {
+	.name		= "IXP4xx",
 	.ack		= ixp4xx_irq_ack,
 	.mask		= ixp4xx_irq_mask,
 	.unmask		= ixp4xx_irq_unmask,
 	.set_type	= ixp4xx_set_irq_type,
 };
 
-static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type)
-{
-	switch (type) {
-	case IXP4XX_IRQ_LEVEL:
-		set_irq_chip(irq, &ixp4xx_irq_level_chip);
-		set_irq_handler(irq, do_level_IRQ);
-		break;
-	case IXP4XX_IRQ_EDGE:
-		set_irq_chip(irq, &ixp4xx_irq_edge_chip);
-		set_irq_handler(irq, do_edge_IRQ);
-		break;
-	}
-	set_irq_flags(irq, IRQF_VALID);
-}
-
 void __init ixp4xx_init_irq(void)
 {
 	int i = 0;
@@ -241,8 +222,11 @@ void __init ixp4xx_init_irq(void)
 	}
 
         /* Default to all level triggered */
-	for(i = 0; i < NR_IRQS; i++)
-		ixp4xx_config_irq(i, IXP4XX_IRQ_LEVEL);
+	for(i = 0; i < NR_IRQS; i++) {
+		set_irq_chip(i, &ixp4xx_irq_chip);
+		set_irq_handler(i, do_level_IRQ);
+		set_irq_flags(i, IRQF_VALID);
+	}
 }
 
 

arch/arm/mach-s3c2410/gpio.c

@@ -3,7 +3,7 @@
  * Copyright (c) 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C2410 GPIO support
+ * S3C24XX GPIO support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -163,3 +163,22 @@ unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
 }
 
 EXPORT_SYMBOL(s3c2410_modify_misccr);
+
+int s3c2410_gpio_getirq(unsigned int pin)
+{
+	if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15)
+		return -1;	/* not valid interrupts */
+
+	if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
+		return -1;	/* not valid pin */
+
+	if (pin < S3C2410_GPF4)
+		return (pin - S3C2410_GPF0) + IRQ_EINT0;
+
+	if (pin < S3C2410_GPG0)
+		return (pin - S3C2410_GPF4) + IRQ_EINT4;
+
+	return (pin - S3C2410_GPG0) + IRQ_EINT8;
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_getirq);

arch/arm/mach-s3c2410/s3c2410-gpio.c

@@ -69,22 +69,3 @@ int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
 }
 
 EXPORT_SYMBOL(s3c2410_gpio_irqfilter);
-
-int s3c2410_gpio_getirq(unsigned int pin)
-{
-	if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15)
-		return -1;	/* not valid interrupts */
-
-	if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
-		return -1;	/* not valid pin */
-
-	if (pin < S3C2410_GPF4)
-		return (pin - S3C2410_GPF0) + IRQ_EINT0;
-
-	if (pin < S3C2410_GPG0)
-		return (pin - S3C2410_GPF4) + IRQ_EINT4;
-
-	return (pin - S3C2410_GPG0) + IRQ_EINT8;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_getirq);

arch/arm/mm/init.c

@@ -32,25 +32,35 @@ extern unsigned long phys_initrd_start;
 extern unsigned long phys_initrd_size;
 
 /*
- * The sole use of this is to pass memory configuration
- * data from paging_init to mem_init.
+ * This is used to pass memory configuration data from paging_init
+ * to mem_init, and by show_mem() to skip holes in the memory map.
  */
-static struct meminfo meminfo __initdata = { 0, };
+static struct meminfo meminfo = { 0, };
+
+#define for_each_nodebank(iter,mi,no)			\
+	for (iter = 0; iter < mi->nr_banks; iter++)	\
+		if (mi->bank[iter].node == no)
 
 void show_mem(void)
 {
 	int free = 0, total = 0, reserved = 0;
-	int shared = 0, cached = 0, slab = 0, node;
+	int shared = 0, cached = 0, slab = 0, node, i;
+	struct meminfo * mi = &meminfo;
 
 	printk("Mem-info:\n");
 	show_free_areas();
 	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
 
 	for_each_online_node(node) {
+		for_each_nodebank (i,mi,node) {
+			unsigned int pfn1, pfn2;
 			struct page *page, *end;
 
-		page = NODE_MEM_MAP(node);
-		end  = page + NODE_DATA(node)->node_spanned_pages;
+			pfn1 = mi->bank[i].start >> PAGE_SHIFT;
+			pfn2 = (mi->bank[i].size + mi->bank[i].start) >> PAGE_SHIFT;
+
+			page = NODE_MEM_MAP(node) + pfn1;
+			end  = NODE_MEM_MAP(node) + pfn2;
 
 			do {
 				total++;
@@ -67,6 +77,7 @@ void show_mem(void)
 				page++;
 			} while (page < end);
 		}
+	}
 
 	printk("%d pages of RAM\n", total);
 	printk("%d free pages\n", free);
@@ -76,10 +87,6 @@ void show_mem(void)
 	printk("%d pages swap cached\n", cached);
 }
 
-#define for_each_nodebank(iter,mi,no)			\
-	for (iter = 0; iter < mi->nr_banks; iter++)	\
-		if (mi->bank[iter].node == no)
-
 /*
  * FIXME: We really want to avoid allocating the bootmap bitmap
  * over the top of the initrd.  Hopefully, this is located towards

arch/arm/mm/proc-xscale.S

@@ -909,7 +909,7 @@ __pxa270_proc_info:
 	b	__xscale_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
-	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_IWMMXT
 	.long	cpu_pxa270_name
 	.long	xscale_processor_functions
 	.long	v4wbi_tlb_fns

include/asm-arm/arch-pxa/pxa-regs.h

@@ -2242,7 +2242,7 @@
 
 #define CICR1_TBIT	(1 << 31)	/* Transparency bit */
 #define CICR1_RGBT_CONV	(0x3 << 30)	/* RGBT conversion mask */
-#define CICR1_PPL	(0x3f << 15)	/* Pixels per line mask */
+#define CICR1_PPL	(0x7ff << 15)	/* Pixels per line mask */
 #define CICR1_RGB_CONV	(0x7 << 12)	/* RGB conversion mask */
 #define CICR1_RGB_F	(1 << 11)	/* RGB format */
 #define CICR1_YCBCR_F	(1 << 10)	/* YCbCr format */
@@ -2268,7 +2268,7 @@
 #define CICR3_VSW	(0x3f << 10)	/* Vertical sync pulse width mask */
 #define CICR3_BFPW	(0x3f << 3)	/* Beginning-of-frame pixel clock
 					   wait count mask */
-#define CICR3_LPF	(0x3ff << 0)	/* Lines per frame mask */
+#define CICR3_LPF	(0x7ff << 0)	/* Lines per frame mask */
 
 #define CICR4_MCLK_DLY	(0x3 << 24)	/* MCLK Data Capture Delay mask */
 #define CICR4_PCLK_EN	(1 << 23)	/* Pixel clock enable */
@@ -2289,8 +2289,8 @@
 #define CISR_EOL	(1 << 8)	/* End of line */
 #define CISR_PAR_ERR	(1 << 7)	/* Parity error */
 #define CISR_CQD	(1 << 6)	/* Camera interface quick disable */
-#define CISR_SOF	(1 << 5)	/* Start of frame */
-#define CISR_CDD	(1 << 4)	/* Camera interface disable done */
+#define CISR_CDD	(1 << 5)	/* Camera interface disable done */
+#define CISR_SOF	(1 << 4)	/* Start of frame */
 #define CISR_EOF	(1 << 3)	/* End of frame */
 #define CISR_IFO_2	(1 << 2)	/* FIFO overrun for Channel 2 */
 #define CISR_IFO_1	(1 << 1)	/* FIFO overrun for Channel 1 */