Merge tag 'platform-drivers-x86-v6.5-4' of...

Merge tag 'platform-drivers-x86-v6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform drivers fixes from Hans de Goede:

 -  lenovo-ymc driver causes keyboard + touchpad to not work with >= 6.4
    on some Thinkbook models, fix this

 -  A set of small fixes for mlx-platform

 -  Other small fixes and hw-id additions

* tag 'platform-drivers-x86-v6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: lenovo-ymc: Only bind on machines with a convertible DMI chassis-type
  platform: mellanox: Change register offset addresses
  platform: mellanox: mlx-platform: Modify graceful shutdown callback and power down mask
  platform: mellanox: mlx-platform: Fix signals polarity and latch mask
  platform: mellanox: Fix order in exit flow
  platform/x86: ISST: Reduce noise for missing numa information in logs
  platform/x86: msi-ec: Fix the build
  ACPI: scan: Create platform device for CS35L56
  platform/x86/amd/pmf: Fix unsigned comparison with less than zero

drivers/acpi/scan.c

@@ -1714,6 +1714,7 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
 		{"BSG1160", },
 		{"BSG2150", },
 		{"CSC3551", },
+		{"CSC3556", },
 		{"INT33FE", },
 		{"INT3515", },
 		/* Non-conforming _HID for Cirrus Logic already released */

drivers/platform/x86/amd/pmf/sps.c

@@ -176,7 +176,8 @@ int amd_pmf_get_pprof_modes(struct amd_pmf_dev *pmf)
 
 int amd_pmf_power_slider_update_event(struct amd_pmf_dev *dev)
 {
-	u8 mode, flag = 0;
+	u8 flag = 0;
+	int mode;
 	int src;
 
 	mode = amd_pmf_get_pprof_modes(dev);

drivers/platform/x86/intel/speed_select_if/isst_if_common.c

@@ -335,7 +335,7 @@ static struct pci_dev *_isst_if_get_pci_dev(int cpu, int bus_no, int dev, int fn
 
 		node = dev_to_node(&_pci_dev->dev);
 		if (node == NUMA_NO_NODE) {
-			pr_info("Fail to get numa node for CPU:%d bus:%d dev:%d fn:%d\n",
+			pr_info_once("Fail to get numa node for CPU:%d bus:%d dev:%d fn:%d\n",
 				     cpu, bus_no, dev, fn);
 			continue;
 		}

drivers/platform/x86/lenovo-ymc.c

@@ -24,6 +24,10 @@ static bool ec_trigger __read_mostly;
 module_param(ec_trigger, bool, 0444);
 MODULE_PARM_DESC(ec_trigger, "Enable EC triggering work-around to force emitting tablet mode events");
 
+static bool force;
+module_param(force, bool, 0444);
+MODULE_PARM_DESC(force, "Force loading on boards without a convertible DMI chassis-type");
+
 static const struct dmi_system_id ec_trigger_quirk_dmi_table[] = {
 	{
 		/* Lenovo Yoga 7 14ARB7 */
@@ -35,6 +39,20 @@ static const struct dmi_system_id ec_trigger_quirk_dmi_table[] = {
 	{ }
 };
 
+static const struct dmi_system_id allowed_chasis_types_dmi_table[] = {
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_CHASSIS_TYPE, "31" /* Convertible */),
+		},
+	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_CHASSIS_TYPE, "32" /* Detachable */),
+		},
+	},
+	{ }
+};
+
 struct lenovo_ymc_private {
 	struct input_dev *input_dev;
 	struct acpi_device *ec_acpi_dev;
@@ -111,6 +129,13 @@ static int lenovo_ymc_probe(struct wmi_device *wdev, const void *ctx)
 	struct input_dev *input_dev;
 	int err;
 
+	if (!dmi_check_system(allowed_chasis_types_dmi_table)) {
+		if (force)
+			dev_info(&wdev->dev, "Force loading Lenovo YMC support\n");
+		else
+			return -ENODEV;
+	}
+
 	ec_trigger |= dmi_check_system(ec_trigger_quirk_dmi_table);
 
 	priv = devm_kzalloc(&wdev->dev, sizeof(*priv), GFP_KERNEL);

drivers/platform/x86/mlx-platform.c

@@ -62,10 +62,6 @@
 #define MLXPLAT_CPLD_LPC_REG_PWM_CONTROL_OFFSET	0x37
 #define MLXPLAT_CPLD_LPC_REG_AGGR_OFFSET	0x3a
 #define MLXPLAT_CPLD_LPC_REG_AGGR_MASK_OFFSET	0x3b
-#define MLXPLAT_CPLD_LPC_REG_DBG1_OFFSET	0x3c
-#define MLXPLAT_CPLD_LPC_REG_DBG2_OFFSET	0x3d
-#define MLXPLAT_CPLD_LPC_REG_DBG3_OFFSET	0x3e
-#define MLXPLAT_CPLD_LPC_REG_DBG4_OFFSET	0x3f
 #define MLXPLAT_CPLD_LPC_REG_AGGRLO_OFFSET	0x40
 #define MLXPLAT_CPLD_LPC_REG_AGGRLO_MASK_OFFSET	0x41
 #define MLXPLAT_CPLD_LPC_REG_AGGRCO_OFFSET	0x42
@@ -126,6 +122,10 @@
 #define MLXPLAT_CPLD_LPC_REG_LC_SD_EVENT_OFFSET	0xaa
 #define MLXPLAT_CPLD_LPC_REG_LC_SD_MASK_OFFSET	0xab
 #define MLXPLAT_CPLD_LPC_REG_LC_PWR_ON		0xb2
+#define MLXPLAT_CPLD_LPC_REG_DBG1_OFFSET	0xb6
+#define MLXPLAT_CPLD_LPC_REG_DBG2_OFFSET	0xb7
+#define MLXPLAT_CPLD_LPC_REG_DBG3_OFFSET	0xb8
+#define MLXPLAT_CPLD_LPC_REG_DBG4_OFFSET	0xb9
 #define MLXPLAT_CPLD_LPC_REG_GP4_RO_OFFSET	0xc2
 #define MLXPLAT_CPLD_LPC_REG_SPI_CHNL_SELECT	0xc3
 #define MLXPLAT_CPLD_LPC_REG_WD_CLEAR_OFFSET	0xc7
@@ -222,7 +222,7 @@
 					 MLXPLAT_CPLD_AGGR_MASK_LC_SDWN)
 #define MLXPLAT_CPLD_LOW_AGGR_MASK_LOW	0xc1
 #define MLXPLAT_CPLD_LOW_AGGR_MASK_ASIC2	BIT(2)
-#define MLXPLAT_CPLD_LOW_AGGR_MASK_PWR_BUT	BIT(4)
+#define MLXPLAT_CPLD_LOW_AGGR_MASK_PWR_BUT	GENMASK(5, 4)
 #define MLXPLAT_CPLD_LOW_AGGR_MASK_I2C	BIT(6)
 #define MLXPLAT_CPLD_PSU_MASK		GENMASK(1, 0)
 #define MLXPLAT_CPLD_PWR_MASK		GENMASK(1, 0)
@@ -237,7 +237,7 @@
 #define MLXPLAT_CPLD_GWP_MASK		GENMASK(0, 0)
 #define MLXPLAT_CPLD_EROT_MASK		GENMASK(1, 0)
 #define MLXPLAT_CPLD_PWR_BUTTON_MASK	BIT(0)
-#define MLXPLAT_CPLD_LATCH_RST_MASK	BIT(5)
+#define MLXPLAT_CPLD_LATCH_RST_MASK	BIT(6)
 #define MLXPLAT_CPLD_THERMAL1_PDB_MASK	BIT(3)
 #define MLXPLAT_CPLD_THERMAL2_PDB_MASK	BIT(4)
 #define MLXPLAT_CPLD_INTRUSION_MASK	BIT(6)
@@ -2356,7 +2356,7 @@ mlxplat_mlxcpld_l1_switch_pwr_events_handler(void *handle, enum mlxreg_hotplug_k
 					     u8 action)
 {
 	dev_info(&mlxplat_dev->dev, "System shutdown due to short press of power button");
-	kernel_halt();
+	kernel_power_off();
 	return 0;
 }
 
@@ -2475,7 +2475,7 @@ static struct mlxreg_core_item mlxplat_mlxcpld_l1_switch_events_items[] = {
 		.reg = MLXPLAT_CPLD_LPC_REG_PWRB_OFFSET,
 		.mask = MLXPLAT_CPLD_PWR_BUTTON_MASK,
 		.count = ARRAY_SIZE(mlxplat_mlxcpld_l1_switch_pwr_events_items_data),
-		.inversed = 0,
+		.inversed = 1,
 		.health = false,
 	},
 	{
@@ -2484,7 +2484,7 @@ static struct mlxreg_core_item mlxplat_mlxcpld_l1_switch_events_items[] = {
 		.reg = MLXPLAT_CPLD_LPC_REG_BRD_OFFSET,
 		.mask = MLXPLAT_CPLD_L1_CHA_HEALTH_MASK,
 		.count = ARRAY_SIZE(mlxplat_mlxcpld_l1_switch_health_events_items_data),
-		.inversed = 0,
+		.inversed = 1,
 		.health = false,
 		.ind = 8,
 	},
@@ -3677,7 +3677,7 @@ static struct mlxreg_core_data mlxplat_mlxcpld_default_ng_regs_io_data[] = {
 	{
 		.label = "latch_reset",
 		.reg = MLXPLAT_CPLD_LPC_REG_GP1_OFFSET,
-		.mask = GENMASK(7, 0) & ~BIT(5),
+		.mask = GENMASK(7, 0) & ~BIT(6),
 		.mode = 0200,
 	},
 	{
@@ -6238,8 +6238,6 @@ static void mlxplat_i2c_mux_topolgy_exit(struct mlxplat_priv *priv)
 		if (priv->pdev_mux[i])
 			platform_device_unregister(priv->pdev_mux[i]);
 	}
-
-	mlxplat_post_exit();
 }
 
 static int mlxplat_i2c_main_complition_notify(void *handle, int id)
@@ -6369,6 +6367,7 @@ static void __exit mlxplat_exit(void)
 		pm_power_off = NULL;
 	mlxplat_pre_exit(priv);
 	mlxplat_i2c_main_exit(priv);
+	mlxplat_post_exit();
 }
 module_exit(mlxplat_exit);
 

drivers/platform/x86/msi-ec.c

@@ -27,15 +27,15 @@
 #include <linux/seq_file.h>
 #include <linux/string.h>
 
-static const char *const SM_ECO_NAME       = "eco";
-static const char *const SM_COMFORT_NAME   = "comfort";
-static const char *const SM_SPORT_NAME     = "sport";
-static const char *const SM_TURBO_NAME     = "turbo";
-
-static const char *const FM_AUTO_NAME     = "auto";
-static const char *const FM_SILENT_NAME   = "silent";
-static const char *const FM_BASIC_NAME    = "basic";
-static const char *const FM_ADVANCED_NAME = "advanced";
+#define SM_ECO_NAME		"eco"
+#define SM_COMFORT_NAME		"comfort"
+#define SM_SPORT_NAME		"sport"
+#define SM_TURBO_NAME		"turbo"
+
+#define FM_AUTO_NAME		"auto"
+#define FM_SILENT_NAME		"silent"
+#define FM_BASIC_NAME		"basic"
+#define FM_ADVANCED_NAME	"advanced"
 
 static const char * const ALLOWED_FW_0[] __initconst = {
 	"14C1EMS1.012",

drivers/platform/x86/serial-multi-instantiate.c

@@ -329,6 +329,19 @@ static const struct smi_node cs35l41_hda = {
 	.bus_type = SMI_AUTO_DETECT,
 };
 
+static const struct smi_node cs35l56_hda = {
+	.instances = {
+		{ "cs35l56-hda", IRQ_RESOURCE_AUTO, 0 },
+		{ "cs35l56-hda", IRQ_RESOURCE_AUTO, 0 },
+		{ "cs35l56-hda", IRQ_RESOURCE_AUTO, 0 },
+		{ "cs35l56-hda", IRQ_RESOURCE_AUTO, 0 },
+		/* a 5th entry is an alias address, not a real device */
+		{ "cs35l56-hda_dummy_dev" },
+		{}
+	},
+	.bus_type = SMI_AUTO_DETECT,
+};
+
 /*
  * Note new device-ids must also be added to ignore_serial_bus_ids in
  * drivers/acpi/scan.c: acpi_device_enumeration_by_parent().
@@ -337,6 +350,7 @@ static const struct acpi_device_id smi_acpi_ids[] = {
 	{ "BSG1160", (unsigned long)&bsg1160_data },
 	{ "BSG2150", (unsigned long)&bsg2150_data },
 	{ "CSC3551", (unsigned long)&cs35l41_hda },
+	{ "CSC3556", (unsigned long)&cs35l56_hda },
 	{ "INT3515", (unsigned long)&int3515_data },
 	/* Non-conforming _HID for Cirrus Logic already released */
 	{ "CLSA0100", (unsigned long)&cs35l41_hda },