Commit 3dd4ce41 authored by Andre Przywara's avatar Andre Przywara Committed by Maxime Ripard

arm64: dts: allwinner: Fix SD card CD GPIO for SOPine systems

Commit 941432d0 ("arm64: dts: allwinner: Drop non-removable from
SoPine/LTS SD card") enabled the card detect GPIO for the SOPine module,
along the way with the Pine64-LTS, which share the same base .dtsi.

However while both boards indeed have a working CD GPIO on PF6, the
polarity is different: the SOPine modules uses a "push-pull" socket,
which has an active-high switch, while the Pine64-LTS use the more
traditional push-push socket and the common active-low switch.

Fix the polarity in the sopine.dtsi, and overwrite it in the LTS
board .dts, to make the SD card work again on systems using SOPine
modules.

Fixes: 941432d0 ("arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card")
Reported-by: default avatarAshley <contact@victorianfox.com>
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
Signed-off-by: default avatarMaxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210316144219.5973-1-andre.przywara@arm.com
parent fbb9e866
...@@ -19,3 +19,7 @@ led { ...@@ -19,3 +19,7 @@ led {
}; };
}; };
}; };
&mmc0 {
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 push-push switch */
};
...@@ -34,7 +34,7 @@ &mmc0 { ...@@ -34,7 +34,7 @@ &mmc0 {
vmmc-supply = <&reg_dcdc1>; vmmc-supply = <&reg_dcdc1>;
disable-wp; disable-wp;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 push-pull switch */
status = "okay"; status = "okay";
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment