Skip to content

L
linux
Commit 3dd8bc0d authored by Paul Mackerras's avatar Paul Mackerras
Browse files
Options

PPC32: Add support for new IBM embedded PPC cpus. 

This adds support for 405GPR, 405LP, STBx25, NP4GS3.
parent 09bbfa65
Hide whitespace changes
Inline Side-by-side
Showing with 1949 additions and 0 deletions
arch/ppc/platforms/4xx/Makefile
View file @ 3dd8bc0d
#
# Makefile for the PowerPC 4xx linux kernel.
export-objs := ibm405lp.o
obj-$(CONFIG_ASH) += ash.o
obj-$(CONFIG_BEECH) += beech.o
obj-$(CONFIG_CEDAR) += cedar.o
......@@ -17,3 +19,7 @@ obj-$(CONFIG_405GP) += ibm405gp.o
obj-$(CONFIG_REDWOOD_4) += ibmstb3.o
obj-$(CONFIG_REDWOOD_5) += ibmstb4.o
obj-$(CONFIG_NP405H) += ibmnp405h.o
obj-$(CONFIG_REDWOOD_6) += ibmstbx25.o
obj-$(CONFIG_NP4GS3) += ibmnp4gs.o
obj-$(CONFIG_405LP) += ibm405lp.o
obj-$(CONFIG_405GPR) += ibm405gpr.o
arch/ppc/platforms/4xx/ibm405gpr.c 0 → 100644
View file @ 3dd8bc0d
/*
*
* Copyright 2000-2002 MontaVista Software Inc.
* Current maintainer
* Armin Kuster akuster@mvista.com
*
* Module name: ibm405gpr.c
*
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <linux/config.h>
#include <linux/init.h>
#include <asm/ocp.h>
#include "ibm405gpr.h"
struct ocp_def core_ocp[] __initdata = {
{OCP_VENDOR_IBM, OCP_FUNC_OPB, OPB_BASE_START, OCP_IRQ_NA, OCP_CPM_NA},
{OCP_VENDOR_IBM, OCP_FUNC_16550, UART0_IO_BASE, UART0_INT,IBM_CPM_UART0},
{OCP_VENDOR_IBM, OCP_FUNC_16550, UART1_IO_BASE, UART1_INT, IBM_CPM_UART1},
{OCP_VENDOR_IBM, OCP_FUNC_IIC, IIC0_BASE, IIC0_IRQ, IBM_CPM_IIC0},
{OCP_VENDOR_IBM, OCP_FUNC_GPIO, GPIO0_BASE, OCP_IRQ_NA, IBM_CPM_GPIO0},
{OCP_VENDOR_IBM, OCP_FUNC_EMAC, EMAC0_BASE, BL_MAC_ETH0, IBM_CPM_EMAC0},
{OCP_VENDOR_INVALID, OCP_FUNC_INVALID, 0x0, OCP_IRQ_NA, OCP_CPM_NA},
};
arch/ppc/platforms/4xx/ibm405gpr.h 0 → 100644
View file @ 3dd8bc0d
/*
* ibm405gpr.h
*
*
* Armin Kuster akuster@mvista.com
* Aug, 2002
*
*
* Copyright 2002 MontaVista Softare Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef __KERNEL__
#ifndef __ASM_IBM405GPR_H__
#define __ASM_IBM405GPR_H__
#include <linux/config.h>
/* ibm405.h at bottom of this file */
/* PCI
* PCI Bridge config reg definitions
* see 17-19 of manual
*/
#define PPC405_PCI_CONFIG_ADDR 0xeec00000
#define PPC405_PCI_CONFIG_DATA 0xeec00004
#define PPC405_PCI_PHY_MEM_BASE 0x80000000 /* hose_a->pci_mem_offset */
/* setbat */
#define PPC405_PCI_MEM_BASE PPC405_PCI_PHY_MEM_BASE /* setbat */
#define PPC405_PCI_PHY_IO_BASE 0xe8000000 /* setbat */
#define PPC405_PCI_IO_BASE PPC405_PCI_PHY_IO_BASE /* setbat */
#define PPC405_PCI_LOWER_MEM 0x80000000 /* hose_a->mem_space.start */
#define PPC405_PCI_UPPER_MEM 0xBfffffff /* hose_a->mem_space.end */
#define PPC405_PCI_LOWER_IO 0x00000000 /* hose_a->io_space.start */
#define PPC405_PCI_UPPER_IO 0x0000ffff /* hose_a->io_space.end */
#define PPC405_ISA_IO_BASE PPC405_PCI_IO_BASE
#define PPC4xx_PCI_IO_PADDR ((uint)PPC405_PCI_PHY_IO_BASE)
#define PPC4xx_PCI_IO_VADDR PPC4xx_PCI_IO_PADDR
#define PPC4xx_PCI_IO_SIZE ((uint)64*1024)
#define PPC4xx_PCI_CFG_PADDR ((uint)PPC405_PCI_CONFIG_ADDR)
#define PPC4xx_PCI_CFG_VADDR PPC4xx_PCI_CFG_PADDR
#define PPC4xx_PCI_CFG_SIZE ((uint)4*1024)
#define PPC4xx_PCI_LCFG_PADDR ((uint)0xef400000)
#define PPC4xx_PCI_LCFG_VADDR PPC4xx_PCI_LCFG_PADDR
#define PPC4xx_PCI_LCFG_SIZE ((uint)4*1024)
#define PPC4xx_ONB_IO_PADDR ((uint)0xef600000)
#define PPC4xx_ONB_IO_VADDR PPC4xx_ONB_IO_PADDR
#define PPC4xx_ONB_IO_SIZE ((uint)4*1024)
#define OPB_BASE_START 0x40000000
#define EBIU_BASE_START 0xF0100000
/* serial port defines */
#define RS_TABLE_SIZE 2
#define UART0_INT 0
#define UART1_INT 1
#define PCIL0_BASE 0xEF400000
#define UART0_IO_BASE 0xEF600300
#define UART1_IO_BASE 0xEF600400
#define IIC0_BASE 0xEF600500
#define OPB0_BASE 0xEF600600
#define GPIO0_BASE 0xEF600700
#define EMAC0_BASE 0xEF600800
#define BL_MAC_WOL 9 /* WOL */
#define BL_MAL_SERR 10 /* MAL SERR */
#define BL_MAL_TXDE 13 /* MAL TXDE */
#define BL_MAL_RXDE 14 /* MAL RXDE */
#define BL_MAL_TXEOB 11 /* MAL TX EOB */
#define BL_MAL_RXEOB 12 /* MAL RX EOB */
#define BL_MAC_ETH0 15 /* MAC */
#define IIC_OWN 0x55
#define IIC_CLOCK 50
#define BD_EMAC_ADDR(e,i) bi_enetaddr[i]
#define STD_UART_OP(num) \
{ 0, BASE_BAUD, 0, UART##num##_INT, \
(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
iomem_base: (u8 *)UART##num##_IO_BASE, \
io_type: SERIAL_IO_MEM},
#if defined(CONFIG_UART0_TTYS0)
#define SERIAL_DEBUG_IO_BASE UART0_IO_BASE
#define SERIAL_PORT_DFNS \
STD_UART_OP(0) \
STD_UART_OP(1)
#endif
#if defined(CONFIG_UART0_TTYS1)
#define SERIAL_DEBUG_IO_BASE UART1_IO_BASE
#define SERIAL_PORT_DFNS \
STD_UART_OP(1) \
STD_UART_OP(0)
#endif
/* DCR defines */
#define DCRN_CHCR_BASE 0x0B1
#define DCRN_CHPSR_BASE 0x0B4
#define DCRN_CPMSR_BASE 0x0B8
#define DCRN_CPMFR_BASE 0x0BA
#define CHR0_U0EC 0x00000080 /* Select external clock for UART0 */
#define CHR0_U1EC 0x00000040 /* Select external clock for UART1 */
#define CHR0_UDIV 0x0000003E /* UART internal clock divisor */
#define CHR1_CETE 0x00800000 /* CPU external timer enable */
#define DCRN_CHPSR_BASE 0x0B4
#define PSR_PLL_FWD_MASK 0xC0000000
#define PSR_PLL_FDBACK_MASK 0x30000000
#define PSR_PLL_TUNING_MASK 0x0E000000
#define PSR_PLB_CPU_MASK 0x01800000
#define PSR_OPB_PLB_MASK 0x00600000
#define PSR_PCI_PLB_MASK 0x00180000
#define PSR_EB_PLB_MASK 0x00060000
#define PSR_ROM_WIDTH_MASK 0x00018000
#define PSR_ROM_LOC 0x00004000
#define PSR_PCI_ASYNC_EN 0x00001000
#define PSR_PCI_ARBIT_EN 0x00000400
#define IBM_CPM_IIC0 0x80000000 /* IIC interface */
#define IBM_CPM_PCI 0x40000000 /* PCI bridge */
#define IBM_CPM_CPU 0x20000000 /* processor core */
#define IBM_CPM_DMA 0x10000000 /* DMA controller */
#define IBM_CPM_OPB 0x08000000 /* PLB to OPB bridge */
#define IBM_CPM_DCP 0x04000000 /* CodePack */
#define IBM_CPM_EBC 0x02000000 /* ROM/SRAM peripheral controller */
#define IBM_CPM_SDRAM0 0x01000000 /* SDRAM memory controller */
#define IBM_CPM_PLB 0x00800000 /* PLB bus arbiter */
#define IBM_CPM_GPIO0 0x00400000 /* General Purpose IO (??) */
#define IBM_CPM_UART0 0x00200000 /* serial port 0 */
#define IBM_CPM_UART1 0x00100000 /* serial port 1 */
#define IBM_CPM_UIC 0x00080000 /* Universal Interrupt Controller */
#define IBM_CPM_TMRCLK 0x00040000 /* CPU timers */
#define IBM_CPM_EMAC0 0x00020000 /* on-chip ethernet MM unit */
#define DFLT_IBM4xx_PM ~(IBM_CPM_PCI | IBM_CPM_CPU | IBM_CPM_DMA \
| IBM_CPM_OPB | IBM_CPM_EBC \
| IBM_CPM_SDRAM0 | IBM_CPM_PLB \
| IBM_CPM_UIC | IBM_CPM_TMRCLK)
#define DCRN_DMA0_BASE 0x100
#define DCRN_DMA1_BASE 0x108
#define DCRN_DMA2_BASE 0x110
#define DCRN_DMA3_BASE 0x118
#define DCRNCAP_DMA_SG 1 /* have DMA scatter/gather capability */
#define DCRN_DMASR_BASE 0x120
#define DCRN_EBC_BASE 0x012
#define DCRN_DCP0_BASE 0x014
#define DCRN_MAL_BASE 0x180
#define DCRN_OCM0_BASE 0x018
#define DCRN_PLB0_BASE 0x084
#define DCRN_PLLMR_BASE 0x0B0
#define DCRN_POB0_BASE 0x0A0
#define DCRN_SDRAM0_BASE 0x010
#define DCRN_UIC0_BASE 0x0C0
#define UIC0 DCRN_UIC0_BASE
#include <asm/ibm405.h>
#endif /* __ASM_IBM405GPR_H__ */
#endif /* __KERNEL__ */
arch/ppc/platforms/4xx/ibm405lp.c 0 → 100644
View file @ 3dd8bc0d
/*
* arch/ppc/platforms/ibm405lp.c 405LP-specific code
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Copyright (C) 2002, International Business Machines Corporation
* All Rights Reserved.
*
* Bishop Brock
* IBM Research, Austin Center for Low-Power Computing
* bcbrock@us.ibm.com
* March, 2002
*/
#include <linux/config.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/proc_fs.h>
#include <linux/stat.h>
#include <linux/string.h>
#include <asm/delay.h>
#include <asm/hardirq.h>
#include <asm/ibm4xx.h>
#include <asm/machdep.h>
#include <asm/page.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/time.h>
#include <asm/uaccess.h>
#include <asm/ocp.h>
struct ocp_def core_ocp[] __initdata = {
{OCP_VENDOR_IBM, OCP_FUNC_OPB, OPB0_BASE, OCP_IRQ_NA, OCP_CPM_NA},
{OCP_VENDOR_IBM, OCP_FUNC_16550, UART0_IO_BASE, UART0_INT,IBM_CPM_UART0},
{OCP_VENDOR_IBM, OCP_FUNC_16550, UART1_IO_BASE, UART1_INT, IBM_CPM_UART1},
{OCP_VENDOR_IBM, OCP_FUNC_IIC, IIC0_BASE, IIC0_IRQ, IBM_CPM_IIC0},
{OCP_VENDOR_IBM, OCP_FUNC_GPIO, GPIO0_BASE, OCP_IRQ_NA, IBM_CPM_GPIO0},
{OCP_VENDOR_INVALID, OCP_FUNC_INVALID, 0x0, OCP_IRQ_NA, OCP_CPM_NA},
};
#ifdef CONFIG_PM
/* Set up the 405LP clock and power management unit for aggressive power
management.
Briefly, there are 3 CPM "classes":
Class 1 - Either completely asleep or awake. The "force" state is
equivalent to the "enabled" state. Many Class 1 units are
critical system components and are never power managed.
Class 2 - Can be enabled for power management, where sleep requests are
made by the peripheral, typically after an inactivity timeout.
When sleeping, critical interfaces remain active, and
awaken the unit whenever it is targeted with a transaction.
Class 3 - Can be enabled for power management, where sleep requests are
made by the CPM. Power management for these units typically
will require intelligence in a device driver.
In the current implementation, the "force" bits are only used on Class 1
devices, and only when the associated driver has the intelligence necessary
to "unforce" the power management state. A previous scheme, which tried to
enable power management based on whether a particular driver was compiled
with the kernel, caused many problems and is never used here.
Class 2 devices with timeouts are normally initialized for the most
aggressive values. There is no power management benefit of "forcing" Class
2 devices over letting their inactivity timeouts take effect. Therefore,
after being set up here, Class 2 device drivers don't need to worry about
CPM.
No Class 3 devices are handled yet. */
void __init
ibm405lp_setup_cpm(void)
{
u32 force = 0;
u32 enable = 0;
dma0_slp_t dma0_slp;
dcp0_cfg_t dcp0_cfg;
ebc0_cfg_t ebc0_cfg;
sdram0_cfg_t sdram0_cfg;
sdram0_pmit_t sdram0_pmit;
sla0_slpmd_t sla0_slpmd;
/* Initialize the CPM state */
mtdcr(DCRN_CPMFR, force);
mtdcr(DCRN_CPMER, enable);
/* IIC - Class 3 - Not handled yet. The driver should at least be able
to force/unforce itself. */
/* CPU - class 2 - There doesn't appear to be a timeout associated with
this, and the exact function is not documented anywhere. It saves a
lot of power, though. I assume this gates core clocks when the CPU
core is asleep, and probably adds a couple of cycles of latency when
the CPU core wakes up. */
enable |= IBM_CPM_CPU;
/* DMA - class 2. Set for the minimum timeout, which is 32 cycles. */
dma0_slp.reg = mfdcr(DCRN_SLP);
dma0_slp.fields.sme = 1;
dma0_slp.fields.idu = 0;
mtdcr(DCRN_SLP, dma0_slp.reg);
enable |= IBM_CPM_DMA;
/* BRG - Class 2. Seems to crash the system when enabled in 405LP Pass
1
DCP (CodePack) - Class 2. The semantics of the sleep delay are not
documented. We'll use 32 (what the heck). */
dcp0_cfg.reg = mfdcri(DCRN_DCP0, CFG);
dcp0_cfg.fields.slen = 1;
dcp0_cfg.fields.sldy = 32;
mtdcri(DCRN_DCP0, CFG, dcp0_cfg.reg);
enable |= IBM_CPM_DCP;
/* EBC - Class 2. Set for minimum timeout, which is 32 cycles. [ I
think this is 32. It may be 64. I don't trust the documentation. ]
*/
ebc0_cfg.reg = mfdcri(DCRN_EBC0, CFG);
ebc0_cfg.fields.pme = 1;
ebc0_cfg.fields.pmt = 1;
mtdcri(DCRN_EBC0, CFG, ebc0_cfg.reg);
enable |= IBM_CPM_EBC;
/* SDRAM - Class 2. Set for the minimum 32-cycle timeout.
The documentation on this core is clear - waking a sleeping SDRAM
controller takes 2 PLB cycles, which is added to the latency of the
memory operation. If someone can prove that this is affecting
performance we can easily back this off. */
sdram0_cfg.reg = mfdcri(DCRN_SDRAM0, CFG);
sdram0_cfg.fields.pme = 1;
mtdcri(DCRN_SDRAM0, CFG, sdram0_cfg.reg);
sdram0_pmit.reg = mfdcri(DCRN_SDRAM0, PMIT);
sdram0_pmit.fields.cnt = 0;
mtdcri(DCRN_SDRAM0, PMIT, sdram0_pmit.reg);
enable |= IBM_CPM_SDRAM0;
/* PLB - Class 2. Seems to crash the system when enabled in 405LP Pass
1.
GPIO - Class 1. This unit is used for many things, and no single
driver controls all GPIO. It's best left unmanaged (it doesn't use
much power anyway). NB: 405LP Pass 1 erratum - forcing PM on GPIO
kills the TPC.
UART0 - Class 1
UART1 - Class 1
Someone should work on the serial port drivers to enable PM support
for them. Any takers?
UIC - Class 1
CPU_TMRCLK - Class 1
These system resources are never power managed. */
/* SLA - Class 2. Set for the minimum 32-cycle timeout. */
sla0_slpmd.reg = mfdcri(DCRN_SLA0, SLPMD);
sla0_slpmd.fields.slen = 1;
sla0_slpmd.fields.slcr = 0;
mtdcri(DCRN_SLA0, SLPMD, sla0_slpmd.reg);
enable |= IBM_CPM_SLA;
/* CSI - Class 1.
TPC - Class 1.
TDES - Class 1.
The drivers for these units are power-aware, and manage the device
properly. By default these units are forced off at boot. */
force |= IBM_CPM_CSI;
force |= IBM_CPM_TPC;
force |= IBM_CPM_TDES;
/* Set the CPM state */
mtdcr(DCRN_CPMFR, force);
mtdcr(DCRN_CPMER, enable);
}
#endif
/* This routine is included here because the framebuffer driver needs a way to
tell the system the Pixel clock frequency it needs, regardless of whether
run-time frequency scaling is configured. A hook and a couple of global
variables are always present and will be used by the RTVFS driver if it is
loaded.
Pixel clock setting is kind of a hack, as the frequency steps available from
the PLB/PixClk divider may be too large to guarantee that we'll hit within
the given limits. We never set the frequency above the upper bound, but due
to quantization may need to set the frequency below the lower bound. So far
it works OK for the panels we've tried.
In general, the choice of a system clock frequency should be made with
consideration of the LCD panel to be attached, to guarantee a good clock
divider for the Pixel clock regardless of frequency scaling.
Clock frequencies are in KHz. If pixclk_min or pixclk_max are zero, we set
the lowest possible frequency to conserve energy. */
int (*set_pixclk_hook) (unsigned pixclk_min, unsigned pixclk_max) = NULL;
unsigned last_pixclk_min = 0;
unsigned last_pixclk_max = 0;
EXPORT_SYMBOL(set_pixclk_hook);
EXPORT_SYMBOL(last_pixclk_min);
EXPORT_SYMBOL(last_pixclk_max);
int
ibm405lp_set_pixclk(unsigned pixclk_min, unsigned pixclk_max)
{
unsigned divider;
bd_t *bip = (bd_t *) __res;
unsigned plb_khz = bip->bi_busfreq / 1000;
cpc0_cgcr1_t cgcr1;
if (set_pixclk_hook) {
return (set_pixclk_hook) (pixclk_min, pixclk_max);
} else {
if ((pixclk_min == 0) || (pixclk_max == 0))
divider = CPC0_DIV_MAX;
else {
divider = plb_khz / pixclk_min;
if (divider == 0)
divider = 1;
if ((divider < CPC0_DIV_MAX) &&
((plb_khz / divider) > pixclk_max))
divider++;
}
cgcr1.reg = mfdcr(DCRN_CPC0_CGCR1);
cgcr1.fields.ppxl = CPC0_DIV_ENCODE(divider);
mtdcr(DCRN_CPC0_CGCR1, cgcr1.reg);
last_pixclk_min = pixclk_min;
last_pixclk_max = pixclk_max;
return 0;
}
}
arch/ppc/platforms/4xx/ibm405lp.h 0 → 100644
View file @ 3dd8bc0d
/*
* include/asm-ppc/platforms/ibm405lp.h 405LP-specific definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Copyright (C) 2002, International Business Machines Corporation
* All Rights Reserved.
*
* Bishop Brock
* IBM Research, Austin Center for Low-Power Computing
* bcbrock@us.ibm.com
* March, 2002
*
*/
#ifdef __KERNEL__
#ifndef __ASM_IBM405LP_H__
#define __ASM_IBM405LP_H__
#include <linux/config.h>
#include <asm/ibm4xx.h>
/* Machine-specific register naming for the 4xx processors is a mess. It seems
that everyone had a different idea on how to prefix/abbreviate/configure the
DCR numbers and MMIO addresses. I'm no different! For the 405LP we have
defined all of the DCRs and MMIO address consistently with their names as
documented in the official IBM hardware manual for the processor.
DCRs are all given a DCRN_ prefix, which seems to be the most
common consistent naming scheme in old code (although the official IBM DCR
names are so unique that there's really little need for the DCRN_).
At the end of the DCR defines several synonyms are defined for backwards
compatibility, but all new code specific to the 405LP uses the consistent
names.
Version 07/24/02 1.1 - Armin
added default pm define
*/
/*****************************************************************************
* Directly accessed DCRs
*****************************************************************************/
/* DCRs used for Indirect Access */
#define DCRN_SDRAM0_CFGADDR 0x010 /* Memory Ctlr. DCR Address Register */
#define DCRN_SDRAM0_CFGDATA 0x011 /* Memory Ctlr. DCR Data Register */
#define DCRN_EBC0_CFGADDR 0x012 /* Peripheral Ctlr. DCR Address Register */
#define DCRN_EBC0_CFGDATA 0x013 /* Peripheral Ctlr. DCR Data Register */
#define DCRN_SLA0_CFGADDR 0x0e0 /* Speech Label Accel. DCR Address Reg. */
#define DCRN_SLA0_CFGDATA 0x0e1 /* Speech Label Accel. DCR Data Reg. */
#define DCRN_LCD0_CFGADDR 0x3c8 /* LCD Ctlr. DCR Address Reg. */
#define DCRN_LCD0_CFGDATA 0x3c9 /* LCD Ctlr. DCR Data Reg. */
/* On-chip Buses */
#define DCRN_PLB0_BESR 0x084 /* PLB Bus Error Status Register */
#define DCRN_PLB0_BEAR 0x086 /* PLB Bus Error Address Register */
#define DCRN_PLB0_ACR 0x087 /* PLB Arbiter Control Register */
#define DCRN_POB0_BESR0 0x0a0 /* PLB to OPB Bus Error Status Register 0 */
#define DCRN_POB0_BEAR 0x0a2 /* PLB to OPB Bus Error Address Register */
#define DCRN_POB0_BESR1 0x0a4 /* PLB to OPB Bus Error Status Register 1 */
/* Clocking and Chip Control */
#define DCRN_CPC0_PLLMR 0x0b0 /* PLL Mode Register */
#define DCRN_CPC0_CGCR0 0x0b1 /* Clock Generation Control Register 0 */
#define DCRN_CPC0_CGCR1 0x0b2 /* Clock Generation Control Register 1 */
#define DCRN_CPC0_CR0 0x0b5 /* Chip Control Register 0 */
#define DCRN_CHCR0 DCRN_CPC0_CR0
#define DCRN_CPC0_CR1 0x0b4 /* Chip Control Register 1 */
#define DCRN_CPC0_PLBAPR 0x0b6 /* PLB Arbiter Priority Register */
#define DCRN_CPC0_JTAGID 0x0b7 /* JTAG ID Register */
/* Clock and Power Management */
#define DCRN_CPMSR_BASE 0x0b8 /* CPM Status Register */
#define DCRN_CPMFR_BASE 0x0ba /* CPM Force Register */
/* Universal Interrupt Controller */
#define DCRN_UIC0_SR 0x0c0 /* UIC Status Register */
#define DCRN_UIC0_ER 0x0c2 /* UIC Enable Register */
#define DCRN_UIC0_CR 0x0c3 /* UIC Critical Register */
#define DCRN_UIC0_PR 0x0c4 /* UIC Polarity Register */
#define DCRN_UIC0_TR 0x0c5 /* UIC Triggering Register */
#define DCRN_UIC0_MSR 0x0c6 /* UIC Masked Status Register */
#define DCRN_UIC0_VR 0x0c7 /* UIC Vector Register */
#define DCRN_UIC0_VCR 0x0c8 /* UIC Vector Configuration Register */
/* Real-time Clock */
#define DCRN_RTC0_SEC 0x140 /* RTC Seconds Register */
#define DCRN_RTC0_SECAL 0x141 /* RTC Seconds Alarm Register */
#define DCRN_RTC0_MIN 0x142 /* RTC Minutes Register */
#define DCRN_RTC0_MINAL 0x143 /* RTC Minutes Alarm Register */
#define DCRN_RTC0_HR 0x144 /* RTC Hours Register */
#define DCRN_RTC0_HRAL 0x145 /* RTC Hours Alarm Register */
#define DCRN_RTC0_DOW 0x146 /* RTC Day of Week Register */
#define DCRN_RTC0_DOM 0x147 /* RTC Date of Month Register */
#define DCRN_RTC0_MONTH 0x148 /* RTC Month Register */
#define DCRN_RTC0_YEAR 0x149 /* RTC Year Register */
#define DCRN_RTC0_CR0 0x14a /* RTC "A" Register */
#define DCRN_RTC0_CR1 0x14b /* RTC "B" Register */
#define DCRN_RTC0_CR2 0x14c /* RTC "C" Register */
#define DCRN_RTC0_CR3 0x14d /* RTC "D" Register */
#define DCRN_RTC0_CEN 0x14e /* RTC Century Register */
#define DCRN_RTC0_WRAP 0x150 /* RTC Wrapper */
/* Advanced Power Management Controller */
#define DCRN_APM0_ISR 0x160 /* APM Interrupt Status Register */
#define DCRN_APM0_IER 0x162 /* APM Interrupt Enable Register */
#define DCRN_APM0_IPR 0x163 /* APM Interrupt Polarity Register */
#define DCRN_APM0_ITR 0x164 /* APM Interrupt Trigger Register */
#define DCRN_APM0_CFG 0x165 /* APM Configuration Register */
#define DCRN_APM0_SR 0x166 /* APM Status Register */
#define DCRN_APM0_ID 0x167 /* APM Revision ID Register */
/* Triple DES Controller */
#define DCRN_TDES0_ADDR 0x180 /* TDES OPB Slave Base Address */
#define DCRN_TDES0_CFG 0x181 /* TDES OPB Slave Configuration */
#define DCRN_TDES0_STAT 0x182 /* TDES Status */
#define DCRN_TDES0_ID 0x183 /* TDES Core ID */
/* LCD Controller */
#define DCRN_LCD0_CFG 0x3c0 /* LCD Configuration Register */
#define DCRN_LCD0_ICR 0x3c1 /* LCD Interrupt Control Register */
#define DCRN_LCD0_ISR 0x3c2 /* LCD Interrupt Status Register */
#define DCRN_LCD0_IMR 0x3c3 /* LCD Interrupt Mask Register */
/*****************************************************************************
* Indirectly accessed DCRs. Note that unlike direct-access DCRs whose numbers
* must be hard-coded into the instruction, indirect-access DCR numbers can be
* computed.
*****************************************************************************/
/* Offsets for SDRAM Controler Registers */
#define DCRN_SDRAM0_BESR0 0x00 /* Bus Error Syndrome Register 0 */
#define DCRN_SDRAM0_BESR1 0x08 /* Bus Error Syndrome Register 1 */
#define DCRN_SDRAM0_BEAR 0x10 /* Bus Error Address Register */
#define DCRN_SDRAM0_CFG 0x20 /* Memory Controller Options 1 */
#define DCRN_SDRAM0_STATUS 0x24 /* SDRAM controller status */
#define DCRN_SDRAM0_RTR 0x30 /* Refresh Timer Register */
#define DCRN_SDRAM0_PMIT 0x34 /* Power Management Idle Timer */
#define DCRN_SDRAM0_B0CR 0x40 /* Memory Bank 0 Configuration */
#define DCRN_SDRAM0_B1CR 0x44 /* Memory Bank 1 Configuration */
#define DCRN_SDRAM0_B2CR 0x48 /* Memory Bank 2 Configuration */
#define DCRN_SDRAM0_B3CR 0x4c /* Memory Bank 3 Configuration */
#define DCRN_SDRAM0_TR 0x80 /* Sdram Timing Register 1 */
#define DCRN_SDRAM0_ECCCFG 0x94 /* ECC Configuration */
#define DCRN_SDRAM0_ECCESR 0x98 /* ECC Error Status Register */
#define SDRAM0_BANKS 4
#define DCRN_SDRAM0_BnCR(bank) (0x40 + (4 * (bank)))
/* Offsets for External Bus Controller Registers */
#define DCRN_EBC0_B0CR 0x00 /* Peripheral Bank 0 Configuration Register */
#define DCRN_EBC0_B1CR 0x01 /* Peripheral Bank 1 Configuration Register */
#define DCRN_EBC0_B2CR 0x02 /* Peripheral Bank 2 Configuration Register */
#define DCRN_EBC0_B3CR 0x03 /* Peripheral Bank 3 Configuration Register */
#define DCRN_EBC0_B4CR 0x04 /* Peripheral Bank 4 Configuration Register */
#define DCRN_EBC0_B5CR 0x05 /* Peripheral Bank 5 Configuration Register */
#define DCRN_EBC0_B6CR 0x06 /* Peripheral Bank 6 Configuration Register */
#define DCRN_EBC0_B7CR 0x07 /* Peripheral Bank 7 Configuration Register */
#define DCRN_EBC0_B0AP 0x10 /* Peripheral Bank 0 Access Parameters */
#define DCRN_EBC0_B1AP 0x11 /* Peripheral Bank 1 Access Parameters */
#define DCRN_EBC0_B2AP 0x12 /* Peripheral Bank 2 Access Parameters */
#define DCRN_EBC0_B3AP 0x13 /* Peripheral Bank 3 Access Parameters */
#define DCRN_EBC0_B4AP 0x14 /* Peripheral Bank 4 Access Parameters */
#define DCRN_EBC0_B5AP 0x15 /* Peripheral Bank 5 Access Parameters */
#define DCRN_EBC0_B6AP 0x16 /* Peripheral Bank 6 Access Parameters */
#define DCRN_EBC0_B7AP 0x17 /* Peripheral Bank 7 Access Parameters */
#define DCRN_EBC0_BEAR 0x20 /* Periperal Bus Error Address Register */
#define DCRN_EBC0_BESR0 0x21 /* Peripheral Bus Error Status Register 0 */
#define DCRN_EBC0_BESR1 0x22 /* Peripheral Bus Error Status Register 0 */
#define DCRN_EBC0_CFG 0x23 /* External Peripheral Control Register */
#define EBC0_BANKS 8
#define DCRN_EBC0_BnCR(bank) (bank)
#define DCRN_EBC0_BnAP(bank) (0x10 + (bank))
/* Offsets for LCD Controller DCRs */
#define DCRN_LCD0_DER 0x80010000 /* Display Enable Regsiter */
#define DCRN_LCD0_DCFG 0x80010010 /* Display Configuration Register */
#define DCRN_LCD0_DSR 0x80010040 /* Display Status Register */
#define DCRN_LCD0_FRDR 0x80010080 /* Dither and Frame Rate Modulation Reg. */
#define DCRN_LCD0_SDR 0x800100c0 /* Signal Delay Register */
#define DCRN_LCD0_ADSR 0x80010100 /* Active Display Size Register */
#define DCRN_LCD0_TDSR 0x80010104 /* Total Display Size Register */
#define DCRN_LCD0_FPLCR 0x80010140 /* FPLINE Control Register */
#define DCRN_LCD0_FPLOR 0x80010144 /* FPLINE Offset Register */
#define DCRN_LCD0_FPFCR 0x80010148 /* FPFRAME Control Register */
#define DCRN_LCD0_FPFOR 0x8001014c /* FPFRAME Control Register */
#define DCRN_LCD0_FPSCR 0x80010150 /* FPSHIFT Control Register */
#define DCRN_LCD0_FPDRR 0x80010158 /* FPDRDY Control Register */
#define DCRN_LCD0_FPDCR 0x80010160 /* FPDATA Control Register */
#define DCRN_LCD0_PFBFR 0x80010800 /* Pixel and Frame Buffer Format Reg. */
#define DCRN_LCD0_PFR 0x80011000 /* Pixel Format Register */
#define DCRN_LCD0_FBBAR 0x80011008 /* Frame Buffer Base Address Register */
#define DCRN_LCD0_STRIDE 0x8001100c /* Stride Register */
#define DCRN_LCD0_PAR 0x80011800 /* Palette Access Registers Base */
#define DCRN_LCD0_CER 0x80012000 /* Cursor Enable Register */
#define DCRN_LCD0_CBAR 0x80012008 /* Cursor Base Address Register */
#define DCRN_LCD0_CLR 0x8001200c /* Cursor Location Register */
#define DCRN_LCD0_CC0R 0x80012010 /* Cursor Color 0 */
#define DCRN_LCD0_CC1R 0x80012014 /* Cursor Color 1 */
#define LCD0_PAR_REGS 256
#define DCRN_LCD0_PARn(n) (DCRN_LCD0_PAR + (4 * (n)))
/* Offsets for Decompression Controller DCRs */
#define DCRN_DCP0_ITOR0 0x00 /* Index Table Origin Register 0 */
#define DCRN_DCP0_ITOR1 0x01 /* Index Table Origin Register 1 */
#define DCRN_DCP0_ITOR2 0x02 /* Index Table Origin Register 2 */
#define DCRN_DCP0_ITOR3 0x03 /* Index Table Origin Register 3 */
#define DCRN_DCP0_ADDR0 0x04 /* Address Decode Definition Register 0 */
#define DCRN_DCP0_ADDR1 0x05 /* Address Decode Definition Register 1 */
#define DCRN_DCP0_CFG 0x40 /* Decompression Controller Cfg. Register */
#define DCRN_DCP0_ID 0x41 /* Decompression Controller ID Register */
#define DCRN_DCP0_VER 0x42 /* Decompression Controller Version Register */
#define DCRN_DCP0_PLBBEAR 0x50 /* Bus Error Address Register (PLB) */
#define DCRN_DCP0_MEMBEAR 0x51 /* Bus Error Address Register (EBC/SDRAM) */
#define DCRN_DCP0_ESR 0x52 /* Bus Error Status Register 0 (Masters 0-3) */
#define DCRN_DCP0_RAMn(n) (0x400 + (n)) /* Decompression Decode Table Entries
0x400-0x5FF Low 16-bit decode table
0x600-0x7FF High 16-bit decode table
*/
/* Offsets for Speech Label Accelerator DCRs */
#define DCRN_SLA0_CR 0x00 /* SLA Control Register */
#define DCRN_SLA0_SR 0x01 /* SLA Status Register */
#define DCRN_SLA0_BESR 0x02 /* SLA Bus Error Status Register */
#define DCRN_SLA0_BEAR 0x03 /* SLA Bus Error Address Register */
#define DCRN_SLA0_UADDR 0x04 /* SLA PLB Upper Address Register */
#define DCRN_SLA0_GMBA 0x05 /* SLA General Indirect Memory Base Address */
#define DCRN_SLA0_GMLL 0x06 /* SLA General Indirect Memory Link List */
#define DCRN_SLA0_AMBA 0x07 /* SLA Atom Memory Base Address Register */
#define DCRN_SLA0_ACBA 0x08 /* SLA Accumulator Base Address Register */
#define DCRN_SLA0_DIBA 0x09 /* SLA Done Indication Base Address Register */
#define DCRN_SLA0_GPOFF 0x0A /* SLA General Indirect Pass Offset Register */
#define DCRN_SLA0_SLPMD 0x0B /* SLA Sleep Mode Control Register */
#define DCRN_SLA0_ID 0x0C /* SLA ID Register */
#define DCRN_SLA0_GMLLR 0x0D /* SLA General Indirect Memory Link List Reset */
#define DCRN_DMA0_BASE 0x100
#define DCRN_DMA1_BASE 0x108
#define DCRN_DMA2_BASE 0x110
#define DCRN_DMA3_BASE 0x118
#define DCRNCAP_DMA_SG 1 /* have DMA scatter/gather capability */
#define DCRN_DMASR_BASE 0x120
#define DCRN_EBC_BASE 0x012
#define DCRN_DCP0_BASE 0x014
#define DCRN_UIC0_BASE 0x0C0
#define UIC0 DCRN_UIC0_BASE
#undef NR_UICS
#define NR_UICS 1
/* More memory-mapped I/O bases, etc., esp. for OCP, that should be moved
elsewhere. */
#define IIC0_BASE 0xEF600500
#define OPB0_BASE 0xEF600600
#define GPIO0_BASE 0xEF600700
#define IIC0_IRQ 2
/****************************************************************************
* MMIO Addresses
***************************************************************************/
/* Touch Panel/PWM Controller */
#define TPC0_IO_BASE 0xef600a00
#define TPC_CR 0x00 /* TPC Command Register */
#define TPC_PCRX 0x04 /* TPC Precharge Count Register X1 */
#define TPC_DCRX 0x08 /* TPC Discharge Count Register X1 */
#define TPC_PCRY 0x0c /* TPC Precharge Count Register Y1 */
#define TPC_DCRY 0x10 /* TPC Discharge Count Register Y1 */
#define TPC_RRX 0x14 /* TPC Read Register X1 */
#define TPC_RRY 0x18 /* TPC Read Register Y1 */
#define TPC_SRX 0x1c /* TPC Status Register X1 */
#define TPC_SRY 0x20 /* TPC Status Register Y1 */
/* Triple-DES Controller */
#define TDES0_IO_BASE 0xef600b00
/*****************************************************************************
* CPM bits for the 405LP.
*****************************************************************************/
#define CPM_BITMASK(i) (((unsigned)0x80000000) >> i)
#define IBM_CPM_IIC0 CPM_BITMASK(0) /* IIC Interface */
#define IBM_CPM_CPU CPM_BITMASK(1) /* Processor Core */
#define IBM_CPM_DMA CPM_BITMASK(3) /* DMA Controller */
#define IBM_CPM_OPB CPM_BITMASK(4) /* PLB to OPB Bridge */
#define IBM_CPM_DCP CPM_BITMASK(5) /* CodePack */
#define IBM_CPM_EBC CPM_BITMASK(6) /* ROM/SRAM Peripheral Controller */
#define IBM_CPM_SDRAM0 CPM_BITMASK(7) /* SDRAM memory controller */
#define IBM_CPM_PLB CPM_BITMASK(8) /* PLB bus arbiter */
#define IBM_CPM_GPIO0 CPM_BITMASK(9) /* General Purpose IO (??) */
#define IBM_CPM_UART0 CPM_BITMASK(10) /* Serial Port 0 */
#define IBM_CPM_UART1 CPM_BITMASK(11) /* Serial Port 1 */
#define IBM_CPM_UIC CPM_BITMASK(12) /* Universal Interrupt Controller */
#define IBM_CPM_TMRCLK CPM_BITMASK(13) /* CPU Timers */
#define IBM_CPM_SLA CPM_BITMASK(14) /* Speech Label Accelerator */
#define IBM_CPM_CSI CPM_BITMASK(15) /* CODEC Serial Interface */
#define IBM_CPM_TPC CPM_BITMASK(16) /* Touch Panel Controller */
#define IBM_CPM_TDES CPM_BITMASK(18) /* Triple DES */
#define DFLT_IBM4xx_PM 0 /* for now until we get a better hable on this one - armin */
/*****************************************************************************
* UIC IRQ ordinals for the 405LP. IRQ bit names are as documented in the
* 405LP manual (except for reserved fields). Backwards-compatible synonyms
* appear at the end.
*****************************************************************************/
#define UIC_IRQ_U0 0 /* UART0 */
#define UIC_IRQ_U1 1 /* UART1 */
#define UIC_IRQ_IIC 2 /* IIC */
#define UIC_IRQ_EM 3 /* EBC ??? */
#define UIC_IRQ_IRQ4 4 /* Reserved */
#define UIC_IRQ_D0 5 /* DMA Channel 0 */
#define UIC_IRQ_D1 6 /* DMA Channel 1 */
#define UIC_IRQ_D2 7 /* DMA Channel 2 */
#define UIC_IRQ_D3 8 /* DMA Channel 3 */
#define UIC_IRQ_IRQ9 9 /* Reserved */
#define UIC_IRQ_IRQ10 10 /* Reserved */
#define UIC_IRQ_IRQ11 11 /* Reserved */
#define UIC_IRQ_IRQ12 12 /* Reserved */
#define UIC_IRQ_IRQ13 13 /* Reserved */
#define UIC_IRQ_IRQ14 14 /* Reserved */
#define UIC_IRQ_IRQ15 15 /* Reserved */
#define UIC_IRQ_IRQ16 16 /* Reserved */
#define UIC_IRQ_EC 17 /* ECC Correctable Error ??? */
#define UIC_IRQ_TPX 18 /* Touch Panel X */
#define UIC_IRQ_TPY 19 /* Touch Panel Y */
#define UIC_IRQ_SLA 20 /* SLA Interrupt */
#define UIC_IRQ_CSI 21 /* CSI Interrupt */
#define UIC_IRQ_LCD 22 /* LCD Interrupt */
#define UIC_IRQ_RTC 23 /* RTC Interrupt */
#define UIC_IRQ_APM 24 /* APM Interrupt */
#define UIC_IRQ_EIR0 25 /* External IRQ 0 */
#define UIC_IRQ_EIR1 26 /* External IRQ 1 */
#define UIC_IRQ_EIR2 27 /* External IRQ 2 */
#define UIC_IRQ_EIR3 28 /* External IRQ 3 */
#define UIC_IRQ_EIR4 29 /* External IRQ 4 */
#define UIC_IRQ_EIR5 30 /* External IRQ 5 */
#define UIC_IRQ_EIR6 31 /* External IRQ 6 */
/*****************************************************************************
* Serial port definitions
*****************************************************************************/
#ifdef CONFIG_SERIAL_MANY_PORTS
#define RS_TABLE_SIZE 64
#else
#define RS_TABLE_SIZE 4
#endif
#define UART0_INT UIC_IRQ_U0
#define UART1_INT UIC_IRQ_U1
#define UART0_IO_BASE 0xEF600300
#define UART1_IO_BASE 0xEF600400
#define STD_UART_OP(num) \
{ 0, BASE_BAUD, 0, UART##num##_INT, \
(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
iomem_base:(u8 *) UART##num##_IO_BASE, \
io_type: SERIAL_IO_MEM},
#if defined(CONFIG_UART0_TTYS0)
#define SERIAL_DEBUG_IO_BASE UART0_IO_BASE
#define SERIAL_PORT_DFNS \
STD_UART_OP(0) \
STD_UART_OP(1)
#endif
#if defined(CONFIG_UART0_TTYS1)
#define SERIAL_DEBUG_IO_BASE UART1_IO_BASE
#define SERIAL_PORT_DFNS \
STD_UART_OP(1) \
STD_UART_OP(0)
#endif
#ifndef __ASSEMBLY__
#include <linux/types.h>
#include <asm/system.h>
/****************************************************************************
* DCR type structures and field definitions for DCRs manipulated by the 405LP
* Linux port
****************************************************************************/
/* APM0_CFG - APM Configuration Register */
typedef union {
u32 reg;
struct {
unsigned int rsvd:17;
unsigned int isp:1; /* Initiate Sleep */
unsigned int ewt:1; /* Enable Watchdog Timer */
unsigned int sm:2; /* Sleep Mode */
unsigned int iica:3; /* I2C Address (low-order 3 bits) */
unsigned int psc:1; /* Power Select Control */
unsigned int cdiv:6; /* IIC Clock Divider */
unsigned int v:1; /* Valid bit */
} fields;
} apm0_cfg_t;
#define APM0_CFG_MASK 0xffff8000 /* AND to clear all non-reserved fields */
/* APM0_SR - APM Status Register */
typedef union {
u32 reg;
struct {
unsigned int rsvd:17;
unsigned int cdet:1; /* Clock Detect */
unsigned int en:1; /* APM Enable Indicator */
unsigned int rset:1; /* Processor Reset by APM? */
unsigned int pfr:1; /* Power Fail Reset? */
unsigned int rsrt:1; /* Restart Successful? */
unsigned int sdwn:1; /* Shutdown Complete */
unsigned int errc:8; /* Error Code */
unsigned int v:1; /* Valid Bit */
} fields;
} apm0_sr_t;
#define APM0_SR_MASK 0xffff8000 /* AND to clear all non-reserved fields */
/* APM0_IER -- APM Interrupt Enable Register
APM0_IPR -- APM Interrupt Polarity Register
APM0_ISR -- APM Interrupt Status Register
APM0_ITR -- APM Interrupt Trigger Register
The interrupts are also accessed via standard interrupt numbers:
59 : Wake-up Input 0
60 : Wake-up Input 1
61 : Wake-up Input 2
62 : Real-Time Clock Interrupt
*/
typedef union {
u32 reg;
struct {
unsigned int rsvd:27;
unsigned int wi0e:1;
unsigned int wi1e:1;
unsigned int wi2e:1;
unsigned int cie:1;
unsigned int v:1;
} fields;
} apm0_ier_t;
typedef union {
u32 reg;
struct {
unsigned int rsvd:27;
unsigned int wi0p:1;
unsigned int wi1p:1;
unsigned int wi2p:1;
unsigned int cip:1;
unsigned int v:1;
} fields;
} apm0_ipr_t;
typedef union {
u32 reg;
struct {
unsigned int rsvd:27;
unsigned int wi0s:1;
unsigned int wi1s:1;
unsigned int wi2s:1;
unsigned int cis:1;
unsigned int v:1;
} fields;
} apm0_isr_t;
typedef union {
u32 reg;
struct {
unsigned int rsvd:27;
unsigned int wi0t:1;
unsigned int wi1t:1;
unsigned int wi2t:1;
unsigned int cit:1;
unsigned int v:1;
} fields;
} apm0_itr_t;
#define APM0_IER_MASK 0xffffffe0 /* AND to clear all non-reserved fields */
#define APM0_IPR_MASK 0xffffffe0 /* AND to clear all non-reserved fields */
#define APM0_ISR_MASK 0xffffffe0 /* AND to clear all non-reserved fields */
#define APM0_ITR_MASK 0xffffffe0 /* AND to clear all non-reserved fields */
/* CPC0_PLLMR - PLL Mode Register */
typedef union {
u32 reg;
struct {
unsigned int pmul:5; /* PLL Multiplier */
unsigned int pdiv:5; /* PLL Divider */
unsigned int tun:10; /* PLL Tuning Control */
unsigned int db2:1; /* Divide VCO by 2 Select */
unsigned int csel:2; /* PLL Clock Output Select */
unsigned int rsvd:8; /* Reserved */
unsigned int v:1; /* Valid bit */
} fields;
} cpc0_pllmr_t;
#define CPC0_PLLMR_MASK 0x000001fe /* AND to clear all non-reserved fields */
#define CPC0_PLLMR_RTVFS_MASK CPC0_PLLMR_MASK /* All bits controlled by RTVFS */
/* The PLL multiplier/divider are always multiples of 4. */
#define CPC0_PLLMR_MULDIV_ENCODE(n) ((((unsigned)(n)) / 4) - 1)
#define CPC0_PLLMR_MULDIV_DECODE(n) (((n) + 1) * 4)
#define CPC0_PLLMR_MULDIV_MAX 128
#define CPC0_PLLMR_TUN_HIGH 0x200 /* High-band tuning */
#define CPC0_PLLMR_TUN_LOW 0x000 /* Low-band tuning */
#define CPC0_PLLMR_CSEL_REFCLK 0 /* System Reference Clock */
#define CPC0_PLLMR_CSEL_PLLVCO 1 /* PLL VCO */
#define CPC0_PLLMR_CSEL_RTC 2 /* RTC */
#define CPC0_PLLMR_CSEL_EBCPLB5 3 /* EBC-PLB divisor is 5 ??? */
/* CPC0_CGCR0 - Clock Generation and Control Register 0 */
typedef union {
u32 reg;
struct {
unsigned int pcp:5; /* Proc. Core/PLB Clock Divisor */
unsigned int pcsc:5; /* Proc. Core/SysClkOut Divisor */
unsigned int pcu:5; /* Proc. Core/UARTSerClk Clock Div. */
unsigned int u0cs:1; /* UART0 Clock Select */
unsigned int u1cs:1; /* UART1 Clock Select */
unsigned int scsel:2; /* SysClkOut Select */
unsigned int rsvd:13; /* Reserved */
} fields;
} cpc0_cgcr0_t;
#define CPC0_CGCR0_MASK 0x00001fff /* AND to clear all non-reserved fields */
#define CPC0_CGCR0_RTVFS_MASK 0x0001ffff /* AND to clear all rtvfs-modified
fields */
#define CPC0_CGCR0_SCSEL_OFF 0 /* SysClkOut driven low (low power) */
#define CPC0_CGCR0_SCSEL_CPU 1 /* Select CPU clock as SysClkOut */
#define CPC0_CGCR0_SCSEL_PLB 2 /* SysClkOut is PLB Sample Cycle */
#define CPC0_CGCR0_SCSEL_OPB 3 /* SysClkOut is OPB Sample Cycle */
/* CPC0_CGCR1 - Clock Generation and Control Register 1 */
typedef union {
u32 reg;
struct {
unsigned int po:5; /* PLB/OPB Clock Divisor */
unsigned int pext:5; /* PLB/External Clock Divisor */
unsigned int ppxl:5; /* PLB/LCD Pixel Clock Divisor */
unsigned int csel:2; /* PerClk Select */
unsigned int rsvd:15; /* Reserved */
} fields;
} cpc0_cgcr1_t;
#define CPC0_CGCR1_MASK 0x00007fff /* AND to clear all non-reserved fields */
#define CPC0_CGCR1_RTVFS_MASK 0x0001ffff /* AND to clear all rtvfs-modified
fields */
/* 5-bit clock dividers are directly encoded, except that an encoding of 0
indicates divide-by-32. */
#define CPC0_DIV_MAX 32
#define CPC0_DIV_VALID(n) (((n) > 0) && ((n) <= CPC0_DIV_MAX))
#define CPC0_DIV_ENCODE(n) (((unsigned)(n) >= CPC0_DIV_MAX) ? 0 : (unsigned)(n))
#define CPC0_DIV_DECODE(n) (((n) == 0) ? CPC0_DIV_MAX : (n))
#define CPC0_CGCR1_CSEL_OFF 0 /* PerClk driven low (low power) */
#define CPC0_CGCR1_CSEL_PERCLK 1 /* Select PerClk */
#define CPC0_CGCR1_CSEL_PLBCLK 2 /* Select PLB clock */
#define CPC0_CGCR1_CSEL_OPBCLK 3 /* Select OPB clock */
/* CPC0_CR0 - Chip Control Register 0 */
typedef union {
u32 reg;
struct {
unsigned int rsvd0:7; /* Reserved */
unsigned int ssr:1; /* SDRAM Self-Refresh on Sleep Req. */
unsigned int gpms:2; /* GPIO Pin Muxing Select */
unsigned int u0pms:2; /* UART0 Pin Muxing Select */
unsigned int u1pms:2; /* UART1 Pin Muxing Select */
unsigned int ipms:2; /* IIC Pin Muxing Select */
unsigned int cpms:2; /* CSI Pin Muxing Select */
unsigned int tpms:2; /* TPC Pin Muxing Select */
unsigned int irpms:2; /* IRQ Pin Muxing Select */
unsigned int pcmd:1; /* PCMCIA Mode Disable */
unsigned int u0dte:1; /* UART0 DMA Transmit Channel Enable */
unsigned int u0rde:1; /* UART0 DMA Receive Channel Enable */
unsigned int u0dce:1; /* UART0 DMA CLear on Enable */
unsigned int rsvd1:6; /* Reserved */
} fields;
} cpc0_cr0_t;
#define CPC0_CR0_MASK 0xfe00003f /* AND to clear all non-reserved fields */
/* CPC0_CR1 - Chip Control Register 1 */
typedef union {
u32 reg;
struct {
unsigned int rsvd0:28; /* Reserved */
unsigned int tbsed:1; /* TB. Src. in Edge Detect Mode */
unsigned int edmd:1; /* TB. Src. Edge Detect Mode Disable */
unsigned int rsvd1:2; /* Reserved */
} fields;
} cpc0_cr1_t;
#define CPC0_CR1_MASK 0xfffffff3 /* AND to clear all non-reserved fields */
/* DCP0_CFG - DCP Configuration Register */
typedef union {
u32 reg;
struct {
unsigned int rsvd0:18;
unsigned int sldy:10; /* Sleep Delay */
unsigned int slen:1; /* Sleep Enable */
unsigned int cdb:1; /* Clear Decompression Buffer */
unsigned int rsvd1:1;
unsigned int ikb:1; /* Enable Decompression */
} fields;
} dcp0_cfg_t;
#define DCP0_CFG_MASK 0xffffc002 /* AND to clear all non-reserved fields */
/* DMA0_SLP - DMA Sleep Mode Register */
typedef union {
u32 reg;
struct {
unsigned idu:5; /* Idle Timer Upper */
unsigned rsvd0:5;
unsigned sme:1; /* Sleep Mode Enable */
unsigned rsvd1:21;
} fields;
} dma0_slp_t;
#define DMA0_SLP_MASK 0x07dfffff /* AND to clear all non-reserved fields */
/* EBC0_BnAP - EBC Bank Access Parameters */
typedef union {
u32 reg;
struct {
unsigned bme:1; /* Burst Mode Enable */
unsigned twt:8; /* Transfer Wait (non-burst) */
unsigned rsvd0:3;
unsigned csn:2; /* Chip Select On Timing */
unsigned oen:2; /* Output Enable On Timing */
unsigned wbn:2; /* Write Byte Enable On Timing */
unsigned wbf:2; /* Write Byte Enable Off Timing */
unsigned th:3; /* Transfer Hold */
unsigned re:1; /* Ready Enable */
unsigned sor:1; /* Sample On Ready */
unsigned bem:1; /* Byte Enable Mode */
unsigned pen:1; /* Parity Enable */
unsigned rsvd1:5;
} fields;
} ebc0_bnap_t;
#define EBC0_BnAP_MASK 0x0070001f /* AND to clear all non-reserved fields */
/* EBC0_BnCR - EBC Bank Configuration Registers */
typedef union {
u32 reg;
struct {
unsigned bas:12; /* Base Address */
unsigned bs:3; /* Bank Size */
unsigned bu:2; /* Bank Usage */
unsigned bw:2; /* Bank Width */
unsigned rsvd:13;
} fields;
} ebc0_bncr_t;
#define EBC0_BnCR_MASK 0x00001fff /* AND to clear all non-reserved fields */
#define EBC0_BnCR_BS_1MB 0
#define EBC0_BnCR_BS_2MB 1
#define EBC0_BnCR_BS_4MB 2
#define EBC0_BnCR_BS_8MB 3
#define EBC0_BnCR_BS_16MB 4
#define EBC0_BnCR_BS_32MB 5
#define EBC0_BnCR_BS_64MB 6
#define EBC0_BnCR_BS_128MB 7
#define EBC0_BnCR_BU_R 1
#define EBC0_BnCR_BU_W 2
#define EBC0_BnCR_BU_RW 3
#define EBC0_BnCR_BW_8 0
#define EBC0_BnCR_BW_16 1
#define EBC0_BnCR_BW_32 2
/* EBC0_CFG -EBC Configuration Register */
typedef union {
u32 reg;
struct {
unsigned ebtc:1; /* External Bus Three State Control */
unsigned ptd:1; /* Device-paced Time-out Disable */
unsigned rtc:3; /* Ready Timeout Count */
unsigned rsvd0:4;
unsigned cstc:1; /* Chip Select Three State Control */
unsigned bpf:2; /* Burst Prefetch */
unsigned rsvd1:2;
unsigned pme:1; /* Power Management Enable */
unsigned pmt:5; /* Power Management Timer */
unsigned rsvd2:12;
} fields;
} ebc0_cfg_t;
#define EBC0_CFG_MASK 0x078c0fff /* AND to clear all non-reserved fields */
#define EBC0_CFG_RTC_16 0
#define EBC0_CFG_RTC_32 1
#define EBC0_CFG_RTC_64 2
#define EBC0_CFG_RTC_128 3
#define EBC0_CFG_RTC_256 4
#define EBC0_CFG_RTC_512 5
#define EBC0_CFG_RTC_1024 6
#define EBC0_CFG_RTC_2048 7
/* SDRAM0_CFG - SDRAM Controller Configuration Register */
typedef union {
u32 reg;
struct {
unsigned int dce:1; /* SDRAM Controller Enable */
unsigned int sre:1; /* Self-Refresh Enable */
unsigned int pme:1; /* Power Management Enable */
unsigned int rsvd0:1;
unsigned int regen:1; /* Registered Memory Enable */
unsigned int drw:2; /* SDRAM Width */
unsigned int brpf:2; /* Burst Read Prefetch Granularity */
unsigned int rsvd1:1;
unsigned int emdulr:1; /* Enable Memory Data Unless Read */
unsigned int rsvd2:21;
} fields;
} sdram0_cfg_t;
#define SDRAM0_CFG_MASK 0x106fffff /* AND to clear all non-reserved fields */
#define SDRAM0_CFG_BRPF_16 1
#define SDRAM0_CFG_BRPF_32 2
/* SDRAM0_PMIT - SDRAM Power Management Idle Timer */
typedef union {
u32 reg;
struct {
unsigned int cnt:5; /* Cycle Count Before Sleep Request */
unsigned int rsvd:27;
} fields;
} sdram0_pmit_t;
#define SDRAM0_PMIT_MASK 0x07ffffff /* AND to clear all non-reserved fields */
/* SDRAM0_RTR - Refresh timer register */
typedef union {
u32 reg;
struct {
unsigned rsvd0:2;
unsigned iv:11;
unsigned rsvd1:19;
} fields;
} sdram0_rtr_t;
#define SDRAM0_RTR_MASK 0xc007ffff /* AND to clear non-reserved fields */
#define SDRAM0_RTR_RTVFS_MASK SDRAM0_RTR_MASK
#define SDRAM0_RTR_IV(n) (((n) & 0x3ff8) >> 2)
/* SDRAM0_TR - SDRAM Timing Register */
typedef union {
u32 reg;
struct {
unsigned int rsvd0:7;
unsigned int casl:2; /* CAS Latency */
unsigned int rsvd1:3;
unsigned int pta:2; /* Precharge-to-activate */
unsigned int ctp:2; /* Read/Write to Precharge */
unsigned int ldf:2; /* Command Leadoff */
unsigned int rsvd2:9;
unsigned int rfta:3; /* Refresh-to-Activate */
unsigned int rcd:2; /* RAS-CAS Delay */
} fields;
} sdram0_tr_t;
#define SDRAM0_TR_MASK 0xfe703fe0 /* AND to clear non-reserved fields */
#define SDRAM0_TR_RTVFS_MASK SDRAM0_TR_MASK
#define SDRAM0_TR_ENCODE(n) ((n) - 1)
#define SDRAM0_TR_ENCODE_RFTA(n) ((n) - 4)
/* SLA0_SLPMD - SLA Sleep Mode Control Register */
typedef union {
u32 reg;
struct {
unsigned slcr:5; /* Sleep Counter */
unsigned rsvd0:5;
unsigned slen:1; /* Sleep Mode Enable */
unsigned rsvd1:21;
} fields;
} sla0_slpmd_t;
#define SLA0_SLPMD_MASK 0x07dfffff /* AND to clear all non-reserved fields */
/* Several direct-write DCRs on the 405LP have an interlock requirement,
implemented by a "valid" bit in the low-order bit. This routine handles the
handshaking for these registers, by
1) Rewriting the current value with the valid bit clear;
2) Rewriting the new value with the valid bit clear;
3) Rewriting the new value with the valid bit set.
The mask is a mask with 1s in every reserved bit position.
NB: This routine always writes the register with the valid bit set,
regardless of the valid bit setting in the 'new' parameter.
Unfortunately this must be a macro to work (due to mtdcr()).
Note that for APM registers, it takes multiple RTC clock cycles for the DCR
writes to take effect. Any time delays after writes to APM are the
resonsibility of the caller.
*/
#define mtdcr_interlock(dcrn, new, mask) \
do { \
u32 __old, __new; \
\
__old = mfdcr(dcrn); \
mtdcr(dcrn, __old & 0xfffffffe); \
__new = ((__old & (mask)) | ((new) & ~(mask))) & 0xfffffffe; \
mtdcr(dcrn, __new); \
mtdcr(dcrn, __new | 1); \
} while (0)
/****************************************************************************
* Power Managament Routines
****************************************************************************/
int ibm405lp_set_pixclk(unsigned pixclk_min, unsigned pixclk_max);
void ibm405lp_reset_sdram(u32 new_rtr, u32 new_tr);
extern int (*set_pixclk_hook) (unsigned pixclk_min, unsigned pixclk_max);
extern unsigned last_pixclk_min;
extern unsigned last_pixclk_max;
#endif /* __ASSEMBLY__ */
#include <asm/ibm405.h>
#endif /* __ASM_IBM405LP_H__ */
#endif /* __KERNEL__ */
arch/ppc/platforms/4xx/ibmnp4gs.c 0 → 100644
View file @ 3dd8bc0d
/*
*
* Copyright 2000-2002 MontaVista Software Inc.
* Completed implementation.
* Current maintainer
* Armin Kuster akuster@mvista.com
*
* Module name: ibmnp4gs.c
*
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <linux/init.h>
#include "ibmnp4gs.h"
#include <asm/ocp.h>
struct ocp_def core_ocp[] = {
{UART, UART0_IO_BASE, UART0_INT, IBM_CPM_UART0},
{PCI, PCIL0_BASE, OCP_IRQ_NA, IBM_CPM_PCI},
{OCP_NULL_TYPE, 0x0, OCP_IRQ_NA, OCP_CPM_NA},
};
arch/ppc/platforms/4xx/ibmnp4gs.h 0 → 100644
View file @ 3dd8bc0d
/*
* ibmnp405gs.h
*
* Armin Kuster akuster@mvista.com
*
*
* Copyright 2002 MontaVista Softare Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef __KERNEL__
#ifndef __ASM_IBMNP4GS_H__
#define __ASM_IBMNP4GS_H__
#include <linux/config.h>
#include <asm/ibm_ocp.h>
/* ibm405.h at bottom of this file */
/* PCI
* PCI Bridge config reg definitions
* see 17-19 of manual
*/
#define PPC405_PCI_CONFIG_ADDR 0xeec00000
#define PPC405_PCI_CONFIG_DATA 0xeec00004
#define PPC405_PCI_PHY_MEM_BASE 0x80000000 /* hose_a->pci_mem_offset */
/* setbat */
#define PPC405_PCI_MEM_BASE PPC405_PCI_PHY_MEM_BASE /* setbat */
#define PPC405_PCI_PHY_IO_BASE 0xe8000000 /* setbat */
#define PPC405_PCI_IO_BASE PPC405_PCI_PHY_IO_BASE /* setbat */
#define PPC405_PCI_LOWER_MEM 0x80000000 /* hose_a->mem_space.start */
#define PPC405_PCI_UPPER_MEM 0xBfffffff /* hose_a->mem_space.end */
#define PPC405_PCI_LOWER_IO 0x00000000 /* hose_a->io_space.start */
#define PPC405_PCI_UPPER_IO 0x0000ffff /* hose_a->io_space.end */
#define PPC405_ISA_IO_BASE PPC405_PCI_IO_BASE
#define PPC4xx_PCI_IO_PADDR ((uint)PPC405_PCI_PHY_IO_BASE)
#define PPC4xx_PCI_IO_VADDR PPC4xx_PCI_IO_PADDR
#define PPC4xx_PCI_IO_SIZE ((uint)64*1024)
#define PPC4xx_PCI_CFG_PADDR ((uint)PPC405_PCI_CONFIG_ADDR)
#define PPC4xx_PCI_CFG_VADDR PPC4xx_PCI_CFG_PADDR
#define PPC4xx_PCI_CFG_SIZE ((uint)4*1024)
#define PPC4xx_PCI_LCFG_PADDR ((uint)0xef400000)
#define PPC4xx_PCI_LCFG_VADDR PPC4xx_PCI_LCFG_PADDR
#define PPC4xx_PCI_LCFG_SIZE ((uint)4*1024)
#define PPC4xx_ONB_IO_PADDR ((uint)0xef600000)
#define PPC4xx_ONB_IO_VADDR PPC4xx_ONB_IO_PADDR
#define PPC4xx_ONB_IO_SIZE ((uint)4*1024)
#define PCI_CONFIG_ADDR_MASK 0x7F000000
#define PCI_CONFIG_CYCLE_ENABLE 0x80000000
#define PCI_BASE_ADDRESS_2 0x18 /* 32 bits [htype 0 only] */
#define PCI_BASE_ADDRESS_MEM_PREFETCH 0x08
#define PCI_CONFIG_ADDR_MASK 0x7F000000
#define PCI_CONFIG_CYCLE_ENABLE 0x80000000
#define PCI_BASE_ADDRESS_MEM_CARD1 0x80000000
#define PCI_BASE_ADDRESS_MEM_CARD2 0x90000000
#define PPC405_UART0_INT 1
#define PPC_405RAINIER2_IO_PAGE ((void*)0xe8001000)
#define PPC_405RAINIER1_IO_PAGE ((void*)0xe8002000)
#define PPC405_UART0_IO_BASE 0x300 /* mostly use (rainier_io_page+0x300) */
#define RAINIER_IO_PAGE_INTERPOSER_PADDR 0xe8000000
#define RAINIER_IO_PAGE_INTERPOSER_VADDR RAINIER_IO_PAGE_INTERPOSER_PADDR
#define RAINIER_IO_PAGE_PCI_PADDR 0xeec00000
#define RAINIER_IO_PAGE_PCI_VADDR RAINIER_IO_PAGE_PCI_PADDR
/* serial port defines */
#define RS_TABLE_SIZE 1
#define UART0_INT 1
#define PCIL0_BASE 0xEF400000
#define UART0_IO_BASE PPC_405RAINIER1_IO_PAGE + PPC405_UART0_IO_BASE
#define UART_NUMS 1
#define BD_EMAC_ADDR(e,i) bi_enetaddr[i]
#define STD_UART_OP(num) \
{ 0, BASE_BAUD, 0, UART##num##_INT, \
(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
iomem_base: (u8 *)UART##num##_IO_BASE, \
io_type: SERIAL_IO_MEM},
#if defined(CONFIG_UART0_TTYS0)
#define SERIAL_PORT_DFNS \
STD_UART_OP(0)
#endif
/* DCR defines */
#define DCRN_CHCR_BASE 0x0B1
#define DCRN_CHPSR_BASE 0x0B4
#define DCRN_CPMSR_BASE 0x0B8
#define DCRN_CPMFR_BASE 0x0BA
#define PSR_PLL_FWD_MASK 0xC0000000
#define PSR_PLL_FDBACK_MASK 0x30000000
#define PSR_PLL_TUNING_MASK 0x0E000000
#define PSR_PLB_CPU_MASK 0x01800000
#define PSR_OPB_PLB_MASK 0x00600000
#define PSR_PCI_PLB_MASK 0x00180000
#define PSR_EB_PLB_MASK 0x00060000
#define PSR_ROM_WIDTH_MASK 0x00018000
#define PSR_ROM_LOC 0x00004000
#define PSR_PCI_ASYNC_EN 0x00001000
#define PSR_PCI_ARBIT_EN 0x00000400
#define IBM_CPM_IIC0 0x80000000 /* IIC interface */
#define IBM_CPM_PCI 0x40000000 /* PCI bridge */
#define IBM_CPM_CPU 0x20000000 /* processor core */
#define IBM_CPM_DMA 0x10000000 /* DMA controller */
#define IBM_CPM_BRG 0x08000000 /* PLB to OPB bridge */
#define IBM_CPM_DCP 0x04000000 /* CodePack */
#define IBM_CPM_EBC 0x02000000 /* ROM/SRAM peripheral controller */
#define IBM_CPM_SDRAM0 0x01000000 /* SDRAM memory controller */
#define IBM_CPM_PLB 0x00800000 /* PLB bus arbiter */
#define IBM_CPM_GPIO0 0x00400000 /* General Purpose IO (??) */
#define IBM_CPM_UART0 0x00200000 /* serial port 0 */
#define IBM_CPM_UART1 0x00100000 /* serial port 1 */
#define IBM_CPM_UIC 0x00080000 /* Universal Interrupt Controller */
#define IBM_CPM_TMRCLK 0x00040000 /* CPU timers */
#define DFLT_IBM4xx_PM 0
#define DCRN_DMA0_BASE 0x100
#define DCRN_DMA1_BASE 0x108
#define DCRN_DMA2_BASE 0x110
#define DCRN_DMA3_BASE 0x118
#define DCRNCAP_DMA_SG 1 /* have DMA scatter/gather capability */
#define DCRN_DMASR_BASE 0x120
#define DCRN_EBC_BASE 0x012
#define DCRN_DCP0_BASE 0x014
#define DCRN_MAL_BASE 0x180
#define DCRN_OCM0_BASE 0x018
#define DCRN_PLB0_BASE 0x084
#define DCRN_PLLMR_BASE 0x0B0
#define DCRN_POB0_BASE 0x0A0
#define DCRN_SDRAM0_BASE 0x010
#define DCRN_UIC0_BASE 0x0C0
#define UIC0 DCRN_UIC0_BASE
#include <asm/ibm405.h>
#endif /* __ASM_IBMNP4GS_H__ */
#endif /* __KERNEL__ */
arch/ppc/platforms/4xx/ibmstbx25.c 0 → 100644
View file @ 3dd8bc0d
/*
*
* Copyright 2000-2002 MontaVista Software Inc.
* Completed implementation.
* Current maintainer
* Armin Kuster akuster@mvista.com
*
* Module name: ibmstbx25.c
*
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/init.h>
#include <asm/ocp.h>
#include "ibmstbx25.h"
struct ocp_def core_ocp[] __initdata = {
{OCP_VENDOR_IBM, OCP_FUNC_PLB, 0x0, OCP_IRQ_NA, OCP_CPM_NA},
{OCP_VENDOR_IBM, OCP_FUNC_OPB, OPB_BASE_START, OCP_IRQ_NA, OCP_CPM_NA},
{OCP_VENDOR_IBM, OCP_FUNC_16550, UART0_IO_BASE, UART0_INT,IBM_CPM_UART0},
{OCP_VENDOR_IBM, OCP_FUNC_16550, UART1_IO_BASE, UART1_INT, IBM_CPM_UART1},
{OCP_VENDOR_IBM, OCP_FUNC_16550, UART2_IO_BASE,UART2_INT, IBM_CPM_UART2},
{OCP_VENDOR_IBM, OCP_FUNC_IIC, IIC0_BASE, IIC0_IRQ, IBM_CPM_IIC0},
{OCP_VENDOR_IBM, OCP_FUNC_GPIO, GPIO0_BASE, OCP_IRQ_NA, IBM_CPM_GPIO0},
{OCP_VENDOR_IBM, OCP_FUNC_IDE, IDE0_BASE, IDE0_IRQ, OCP_CPM_NA},
{OCP_VENDOR_IBM, OCP_FUNC_EXT, EBIU_BASE_START, OCP_IRQ_NA,IBM_CPM_EBIU},
{OCP_VENDOR_INVALID, OCP_FUNC_INVALID, 0x0, OCP_IRQ_NA, OCP_CPM_NA},
};
arch/ppc/platforms/4xx/ibmstbx25.h 0 → 100644
View file @ 3dd8bc0d
/*
* ibmstbx25.h
*
* Current maintainer
* Armin Kuster akuster@mvista.com
* July, 2002
*
*
* Copyright 2002 MontaVista Softare Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef __KERNEL__
#ifndef __ASM_IBMSTBX25_H__
#define __ASM_IBMSTBX25_H__
#include <linux/config.h>
/* serial port defines */
#define STBx25xx_IO_BASE ((uint)0xe0000000)
#define PPC4xx_ONB_IO_PADDR STBx25xx_IO_BASE
#define PPC4xx_ONB_IO_VADDR ((uint)0xe0000000)
#define PPC4xx_ONB_IO_SIZE ((uint)14*64*1024)
/*
* map STBxxxx internal i/o address (0x400x00xx) to an address
* which is below the 2GB limit...
*
* 4000 000x uart1 -> 0xe000 000x
* 4001 00xx uart2
* 4002 00xx smart card
* 4003 000x iic
* 4004 000x uart0
* 4005 0xxx timer
* 4006 00xx gpio
* 4007 00xx smart card
* 400b 000x iic
* 400c 000x scp
* 400d 000x modem
* 400e 000x uart2
*/
#define STBx25xx_MAP_IO_ADDR(a) (((uint)(a)) + (STBx25xx_IO_BASE - 0x40000000))
#define RS_TABLE_SIZE 3
#define OPB_BASE_START 0x40000000
#define EBIU_BASE_START 0xF0100000
#define DCR_BASE_START 0x0000
#ifdef __BOOTER__
#define UART1_IO_BASE 0x40000000
#define UART2_IO_BASE 0x40010000
#else
#define UART1_IO_BASE 0xe0000000
#define UART2_IO_BASE 0xe0010000
#endif
#define SC0_BASE 0x40020000 /* smart card #0 */
#define IIC0_BASE 0x40030000
#ifdef __BOOTER__
#define UART0_IO_BASE 0x40040000
#else
#define UART0_IO_BASE 0xe0040000
#endif
#define SCC0_BASE 0x40040000 /* Serial 0 controller IrdA */
#define GPT0_BASE 0x40050000 /* General purpose timers */
#define GPIO0_BASE 0x40060000
#define SC1_BASE 0x40070000 /* smart card #1 */
#define SCP0_BASE 0x400C0000 /* Serial Controller Port */
#define SSP0_BASE 0x400D0000 /* Sync serial port */
#define IDE0_BASE 0xf0100000
#define REDWOOD_IDE_CTRL 0xf1100000
#define RTCFPC_IRQ 0
#define XPORT_IRQ 1
#define AUD_IRQ 2
#define AID_IRQ 3
#define DMA0 4
#define DMA1_IRQ 5
#define DMA2_IRQ 6
#define DMA3_IRQ 7
#define SC0_IRQ 8
#define IIC0_IRQ 9
#define IIR0_IRQ 10
#define GPT0_IRQ 11
#define GPT1_IRQ 12
#define SCP0_IRQ 13
#define SSP0_IRQ 14
#define GPT2_IRQ 15 /* count down timer */
#define SC1_IRQ 16
/* IRQ 17 - 19 external */
#define UART0_INT 20
#define UART1_INT 21
#define UART2_INT 22
#define XPTDMA_IRQ 23
#define DCRIDE_IRQ 24
/* IRQ 25 - 30 external */
#define IDE0_IRQ 26
#define IIC_NUMS 1
#define UART_NUMS 3
#define IIC_OWN 0x55
#define IIC_CLOCK 50
#define BD_EMAC_ADDR(e,i) bi_enetaddr[i]
#define STD_UART_OP(num) \
{ 0, BASE_BAUD, 0, UART##num##_INT, \
(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
iomem_base: (u8 *)UART##num##_IO_BASE, \
io_type: SERIAL_IO_MEM},
#if defined(CONFIG_UART0_TTYS0)
#define SERIAL_DEBUG_IO_BASE UART0_IO_BASE
#define SERIAL_PORT_DFNS \
STD_UART_OP(0) \
STD_UART_OP(1) \
STD_UART_OP(2)
#endif
#if defined(CONFIG_UART0_TTYS1)
#define SERIAL_DEBUG_IO_BASE UART2_IO_BASE
#define SERIAL_PORT_DFNS \
STD_UART_OP(1) \
STD_UART_OP(0) \
STD_UART_OP(2)
#endif
#if defined(CONFIG_UART0_TTYS2)
#define SERIAL_DEBUG_IO_BASE UART2_IO_BASE
#define SERIAL_PORT_DFNS \
STD_UART_OP(2) \
STD_UART_OP(0) \
STD_UART_OP(1)
#endif
#define DCRN_BE_BASE 0x090
#define DCRN_DMA0_BASE 0x0C0
#define DCRN_DMA1_BASE 0x0C8
#define DCRN_DMA2_BASE 0x0D0
#define DCRN_DMA3_BASE 0x0D8
#define DCRNCAP_DMA_CC 1 /* have DMA chained count capability */
#define DCRN_DMASR_BASE 0x0E0
#define DCRN_PLB0_BASE 0x054
#define DCRN_PLB1_BASE 0x064
#define DCRN_POB0_BASE 0x0B0
#define DCRN_SCCR_BASE 0x120
#define DCRN_UIC0_BASE 0x040
#define DCRN_BE_BASE 0x090
#define DCRN_DMA0_BASE 0x0C0
#define DCRN_DMA1_BASE 0x0C8
#define DCRN_DMA2_BASE 0x0D0
#define DCRN_DMA3_BASE 0x0D8
#define DCRN_CIC_BASE 0x030
#define DCRN_DMASR_BASE 0x0E0
#define DCRN_EBIMC_BASE 0x070
#define DCRN_DCRX_BASE 0x020
#define DCRN_CPMFR_BASE 0x102
#define DCRN_SCCR_BASE 0x120
#define DCRN_RTCFP_BASE 0x310
#define UIC0 DCRN_UIC0_BASE
#define IBM_CPM_IIC0 0x80000000 /* IIC 0 interface */
#define IBM_CPM_CPU 0x10000000 /* PPC405B3 clock control */
#define IBM_CPM_AUD 0x08000000 /* Audio Decoder */
#define IBM_CPM_EBIU 0x04000000 /* External Bus Interface Unit */
#define IBM_CPM_IRR 0x02000000 /* Infrared reciever */
#define IBM_CPM_DMA 0x01000000 /* DMA controller */
#define IBM_CPM_UART2 0x00200000 /* Serial Control Port */
#define IBM_CPM_UART1 0x00100000 /* Serial 1 / Infrared */
#define IBM_CPM_UART0 0x00080000 /* Serial 0 / 16550 */
#define IBM_PM_DCRIDE 0x00040000 /* DCR timeout & IDE line Mode clock */
#define IBM_CPM_SC0 0x00020000 /* Smart Card 0 */
#define IBM_CPM_VID 0x00010000 /* reserved */
#define IBM_CPM_SC1 0x00008000 /* Smart Card 0 */
#define IBM_CPM_XPT0 0x00002000 /* Transport - 54 Mhz */
#define IBM_CPM_CBS 0x00001000 /* Cross Bar Switch */
#define IBM_CPM_GPT 0x00000800 /* GPTPWM */
#define IBM_CPM_GPIO0 0x00000400 /* General Purpose IO 0 */
#define IBM_CPM_DENC 0x00000200 /* Digital video Encoder */
#define IBM_CPM_C405T 0x00000100 /* CPU timers */
#define IBM_CPM_XPT27 0x00000080 /* Transport - 27 Mhz */
#define IBM_CPM_UIC 0x00000040 /* Universal Interrupt Controller */
#define IBM_CPM_RTCFPC 0x00000020 /* Realtime clock and front panel */
#define IBM_CPM_SSP 0x00000010 /* Modem Serial Interface (SSP) */
#define IBM_CPM_VID2 0x00000002 /* Video Decoder clock domain 2 */
#define DFLT_IBM4xx_PM ~(IBM_CPM_CPU | IBM_CPM_EBIU | IBM_CPM_DMA \
| IBM_CPM_CBS | IBM_CPM_XPT0 | IBM_CPM_C405T \
| IBM_CPM_XPT27 | IBM_CPM_UIC)
#define DCRN_BEAR (DCRN_BE_BASE + 0x0) /* Bus Error Address Register */
#define DCRN_BESR (DCRN_BE_BASE + 0x1) /* Bus Error Syndrome Register */
/* DCRN_BESR */
#define BESR_DSES 0x80000000 /* Data-Side Error Status */
#define BESR_DMES 0x40000000 /* DMA Error Status */
#define BESR_RWS 0x20000000 /* Read/Write Status */
#define BESR_ETMASK 0x1C000000 /* Error Type */
#define ET_PROT 0
#define ET_PARITY 1
#define ET_NCFG 2
#define ET_BUSERR 4
#define ET_BUSTO 6
#define CHR1_CETE 0x00800000 /* CPU external timer enable */
#define CHR1_PCIPW 0x00008000 /* PCI Int enable/Peripheral Write enable */
#define DCRN_CICCR (DCRN_CIC_BASE + 0x0) /* CIC Control Register */
#define DCRN_DMAS1 (DCRN_CIC_BASE + 0x1) /* DMA Select1 Register */
#define DCRN_DMAS2 (DCRN_CIC_BASE + 0x2) /* DMA Select2 Register */
#define DCRN_CICVCR (DCRN_CIC_BASE + 0x3) /* CIC Video COntro Register */
#define DCRN_CICSEL3 (DCRN_CIC_BASE + 0x5) /* CIC Select 3 Register */
#define DCRN_SGPO (DCRN_CIC_BASE + 0x6) /* CIC GPIO Output Register */
#define DCRN_SGPOD (DCRN_CIC_BASE + 0x7) /* CIC GPIO OD Register */
#define DCRN_SGPTC (DCRN_CIC_BASE + 0x8) /* CIC GPIO Tristate Ctrl Reg */
#define DCRN_SGPI (DCRN_CIC_BASE + 0x9) /* CIC GPIO Input Reg */
#define DCRN_DCRXICR (DCRN_DCRX_BASE + 0x0) /* Internal Control Register */
#define DCRN_DCRXISR (DCRN_DCRX_BASE + 0x1) /* Internal Status Register */
#define DCRN_DCRXECR (DCRN_DCRX_BASE + 0x2) /* External Control Register */
#define DCRN_DCRXESR (DCRN_DCRX_BASE + 0x3) /* External Status Register */
#define DCRN_DCRXTAR (DCRN_DCRX_BASE + 0x4) /* Target Address Register */
#define DCRN_DCRXTDR (DCRN_DCRX_BASE + 0x5) /* Target Data Register */
#define DCRN_DCRXIGR (DCRN_DCRX_BASE + 0x6) /* Interrupt Generation Register */
#define DCRN_DCRXBCR (DCRN_DCRX_BASE + 0x7) /* Line Buffer Control Register */
#define DCRN_BRCRH0 (DCRN_EBIMC_BASE + 0x0) /* Bus Region Config High 0 */
#define DCRN_BRCRH1 (DCRN_EBIMC_BASE + 0x1) /* Bus Region Config High 1 */
#define DCRN_BRCRH2 (DCRN_EBIMC_BASE + 0x2) /* Bus Region Config High 2 */
#define DCRN_BRCRH3 (DCRN_EBIMC_BASE + 0x3) /* Bus Region Config High 3 */
#define DCRN_BRCRH4 (DCRN_EBIMC_BASE + 0x4) /* Bus Region Config High 4 */
#define DCRN_BRCRH5 (DCRN_EBIMC_BASE + 0x5) /* Bus Region Config High 5 */
#define DCRN_BRCRH6 (DCRN_EBIMC_BASE + 0x6) /* Bus Region Config High 6 */
#define DCRN_BRCRH7 (DCRN_EBIMC_BASE + 0x7) /* Bus Region Config High 7 */
#define DCRN_BRCR0 (DCRN_EBIMC_BASE + 0x10) /* BRC 0 */
#define DCRN_BRCR1 (DCRN_EBIMC_BASE + 0x11) /* BRC 1 */
#define DCRN_BRCR2 (DCRN_EBIMC_BASE + 0x12) /* BRC 2 */
#define DCRN_BRCR3 (DCRN_EBIMC_BASE + 0x13) /* BRC 3 */
#define DCRN_BRCR4 (DCRN_EBIMC_BASE + 0x14) /* BRC 4 */
#define DCRN_BRCR5 (DCRN_EBIMC_BASE + 0x15) /* BRC 5 */
#define DCRN_BRCR6 (DCRN_EBIMC_BASE + 0x16) /* BRC 6 */
#define DCRN_BRCR7 (DCRN_EBIMC_BASE + 0x17) /* BRC 7 */
#define DCRN_BEAR0 (DCRN_EBIMC_BASE + 0x20) /* Bus Error Address Register */
#define DCRN_BESR0 (DCRN_EBIMC_BASE + 0x21) /* Bus Error Status Register */
#define DCRN_BIUCR (DCRN_EBIMC_BASE + 0x2A) /* Bus Interfac Unit Ctrl Reg */
#define DCRN_RTC_FPC0_CNTL (DCRN_RTCFP_BASE + 0x00) /* RTC cntl */
#define DCRN_RTC_FPC0_INT (DCRN_RTCFP_BASE + 0x01) /* RTC Interrupt */
#define DCRN_RTC_FPC0_TIME (DCRN_RTCFP_BASE + 0x02) /* RTC time reg */
#define DCRN_RTC_FPC0_ALRM (DCRN_RTCFP_BASE + 0x03) /* RTC Alarm reg */
#define DCRN_RTC_FPC0_D1 (DCRN_RTCFP_BASE + 0x04) /* LED Data 1 */
#define DCRN_RTC_FPC0_D2 (DCRN_RTCFP_BASE + 0x05) /* LED Data 2 */
#define DCRN_RTC_FPC0_D3 (DCRN_RTCFP_BASE + 0x06) /* LED Data 3 */
#define DCRN_RTC_FPC0_D4 (DCRN_RTCFP_BASE + 0x07) /* LED Data 4 */
#define DCRN_RTC_FPC0_D5 (DCRN_RTCFP_BASE + 0x08) /* LED Data 5 */
#define DCRN_RTC_FPC0_FCNTL (DCRN_RTCFP_BASE + 0x09) /* LED control */
#define DCRN_RTC_FPC0_BRT (DCRN_RTCFP_BASE + 0x0A) /* Brightness cntl */
#include <asm/ibm405.h>
#endif /* __ASM_IBMSTBX25_H__ */
#endif /* __KERNEL__ */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7