Commit 3e09b7e9 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'usb-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some USB driver ids for 4.5-rc7, and the removal of a driver
  we merged in 4.5-rc1 but it turns out it's not needed as the hardware
  is the same as a driver we already have in the tree.

  This was only figured out after doing a lot of cleanup on it, gotta
  love vendor-provided drivers...  The new device ids for the devices
  for this driver will be added later on when testing is completed, but
  for now, we will remove the driver to keep people from accidentally
  cleaning it up.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: qcserial: add Sierra Wireless EM74xx device ID
  Revert "USB: serial: add Moxa UPORT 11x0 driver"
  USB: serial: option: add support for Quectel UC20
  USB: serial: option: add support for Telit LE922 PID 0x1045
  USB: cp210x: Add ID for Parrot NMEA GPS Flight Recorder
  USB: qcserial: add Dell Wireless 5809e Gobi 4G HSPA+ (rev3)
  usb: chipidea: otg: change workqueue ci_otg as freezable
parents 67944024 861c3849
...@@ -158,7 +158,7 @@ static void ci_otg_work(struct work_struct *work) ...@@ -158,7 +158,7 @@ static void ci_otg_work(struct work_struct *work)
int ci_hdrc_otg_init(struct ci_hdrc *ci) int ci_hdrc_otg_init(struct ci_hdrc *ci)
{ {
INIT_WORK(&ci->work, ci_otg_work); INIT_WORK(&ci->work, ci_otg_work);
ci->wq = create_singlethread_workqueue("ci_otg"); ci->wq = create_freezable_workqueue("ci_otg");
if (!ci->wq) { if (!ci->wq) {
dev_err(ci->dev, "can't create workqueue\n"); dev_err(ci->dev, "can't create workqueue\n");
return -ENODEV; return -ENODEV;
......
...@@ -475,22 +475,6 @@ config USB_SERIAL_MOS7840 ...@@ -475,22 +475,6 @@ config USB_SERIAL_MOS7840
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called mos7840. If unsure, choose N. module will be called mos7840. If unsure, choose N.
config USB_SERIAL_MXUPORT11
tristate "USB Moxa UPORT 11x0 Serial Driver"
---help---
Say Y here if you want to use a MOXA UPort 11x0 Serial hub.
This driver supports:
- UPort 1110 : 1 port RS-232 USB to Serial Hub.
- UPort 1130 : 1 port RS-422/485 USB to Serial Hub.
- UPort 1130I : 1 port RS-422/485 USB to Serial Hub with Isolation.
- UPort 1150 : 1 port RS-232/422/485 USB to Serial Hub.
- UPort 1150I : 1 port RS-232/422/485 USB to Serial Hub with Isolation.
To compile this driver as a module, choose M here: the
module will be called mxu11x0.
config USB_SERIAL_MXUPORT config USB_SERIAL_MXUPORT
tristate "USB Moxa UPORT Serial Driver" tristate "USB Moxa UPORT Serial Driver"
---help--- ---help---
......
...@@ -38,7 +38,6 @@ obj-$(CONFIG_USB_SERIAL_METRO) += metro-usb.o ...@@ -38,7 +38,6 @@ obj-$(CONFIG_USB_SERIAL_METRO) += metro-usb.o
obj-$(CONFIG_USB_SERIAL_MOS7720) += mos7720.o obj-$(CONFIG_USB_SERIAL_MOS7720) += mos7720.o
obj-$(CONFIG_USB_SERIAL_MOS7840) += mos7840.o obj-$(CONFIG_USB_SERIAL_MOS7840) += mos7840.o
obj-$(CONFIG_USB_SERIAL_MXUPORT) += mxuport.o obj-$(CONFIG_USB_SERIAL_MXUPORT) += mxuport.o
obj-$(CONFIG_USB_SERIAL_MXUPORT11) += mxu11x0.o
obj-$(CONFIG_USB_SERIAL_NAVMAN) += navman.o obj-$(CONFIG_USB_SERIAL_NAVMAN) += navman.o
obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o
obj-$(CONFIG_USB_SERIAL_OPTICON) += opticon.o obj-$(CONFIG_USB_SERIAL_OPTICON) += opticon.o
......
...@@ -165,6 +165,7 @@ static const struct usb_device_id id_table[] = { ...@@ -165,6 +165,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x18EF, 0xE025) }, /* ELV Marble Sound Board 1 */ { USB_DEVICE(0x18EF, 0xE025) }, /* ELV Marble Sound Board 1 */
{ USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */ { USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */
{ USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */ { USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */
{ USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */
{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */ { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */ { USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
{ USB_DEVICE(0x1BA4, 0x0002) }, /* Silicon Labs 358x factory default */ { USB_DEVICE(0x1BA4, 0x0002) }, /* Silicon Labs 358x factory default */
......
/*
* USB Moxa UPORT 11x0 Serial Driver
*
* Copyright (C) 2007 MOXA Technologies Co., Ltd.
* Copyright (C) 2015 Mathieu Othacehe <m.othacehe@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* Supports the following Moxa USB to serial converters:
* UPort 1110, 1 port RS-232 USB to Serial Hub.
* UPort 1130, 1 port RS-422/485 USB to Serial Hub.
* UPort 1130I, 1 port RS-422/485 USB to Serial Hub with isolation
* protection.
* UPort 1150, 1 port RS-232/422/485 USB to Serial Hub.
* UPort 1150I, 1 port RS-232/422/485 USB to Serial Hub with isolation
* protection.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/jiffies.h>
#include <linux/serial.h>
#include <linux/serial_reg.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
/* Vendor and product ids */
#define MXU1_VENDOR_ID 0x110a
#define MXU1_1110_PRODUCT_ID 0x1110
#define MXU1_1130_PRODUCT_ID 0x1130
#define MXU1_1150_PRODUCT_ID 0x1150
#define MXU1_1151_PRODUCT_ID 0x1151
#define MXU1_1131_PRODUCT_ID 0x1131
/* Commands */
#define MXU1_GET_VERSION 0x01
#define MXU1_GET_PORT_STATUS 0x02
#define MXU1_GET_PORT_DEV_INFO 0x03
#define MXU1_GET_CONFIG 0x04
#define MXU1_SET_CONFIG 0x05
#define MXU1_OPEN_PORT 0x06
#define MXU1_CLOSE_PORT 0x07
#define MXU1_START_PORT 0x08
#define MXU1_STOP_PORT 0x09
#define MXU1_TEST_PORT 0x0A
#define MXU1_PURGE_PORT 0x0B
#define MXU1_RESET_EXT_DEVICE 0x0C
#define MXU1_GET_OUTQUEUE 0x0D
#define MXU1_WRITE_DATA 0x80
#define MXU1_READ_DATA 0x81
#define MXU1_REQ_TYPE_CLASS 0x82
/* Module identifiers */
#define MXU1_I2C_PORT 0x01
#define MXU1_IEEE1284_PORT 0x02
#define MXU1_UART1_PORT 0x03
#define MXU1_UART2_PORT 0x04
#define MXU1_RAM_PORT 0x05
/* Modem status */
#define MXU1_MSR_DELTA_CTS 0x01
#define MXU1_MSR_DELTA_DSR 0x02
#define MXU1_MSR_DELTA_RI 0x04
#define MXU1_MSR_DELTA_CD 0x08
#define MXU1_MSR_CTS 0x10
#define MXU1_MSR_DSR 0x20
#define MXU1_MSR_RI 0x40
#define MXU1_MSR_CD 0x80
#define MXU1_MSR_DELTA_MASK 0x0F
#define MXU1_MSR_MASK 0xF0
/* Line status */
#define MXU1_LSR_OVERRUN_ERROR 0x01
#define MXU1_LSR_PARITY_ERROR 0x02
#define MXU1_LSR_FRAMING_ERROR 0x04
#define MXU1_LSR_BREAK 0x08
#define MXU1_LSR_ERROR 0x0F
#define MXU1_LSR_RX_FULL 0x10
#define MXU1_LSR_TX_EMPTY 0x20
/* Modem control */
#define MXU1_MCR_LOOP 0x04
#define MXU1_MCR_DTR 0x10
#define MXU1_MCR_RTS 0x20
/* Mask settings */
#define MXU1_UART_ENABLE_RTS_IN 0x0001
#define MXU1_UART_DISABLE_RTS 0x0002
#define MXU1_UART_ENABLE_PARITY_CHECKING 0x0008
#define MXU1_UART_ENABLE_DSR_OUT 0x0010
#define MXU1_UART_ENABLE_CTS_OUT 0x0020
#define MXU1_UART_ENABLE_X_OUT 0x0040
#define MXU1_UART_ENABLE_XA_OUT 0x0080
#define MXU1_UART_ENABLE_X_IN 0x0100
#define MXU1_UART_ENABLE_DTR_IN 0x0800
#define MXU1_UART_DISABLE_DTR 0x1000
#define MXU1_UART_ENABLE_MS_INTS 0x2000
#define MXU1_UART_ENABLE_AUTO_START_DMA 0x4000
#define MXU1_UART_SEND_BREAK_SIGNAL 0x8000
/* Parity */
#define MXU1_UART_NO_PARITY 0x00
#define MXU1_UART_ODD_PARITY 0x01
#define MXU1_UART_EVEN_PARITY 0x02
#define MXU1_UART_MARK_PARITY 0x03
#define MXU1_UART_SPACE_PARITY 0x04
/* Stop bits */
#define MXU1_UART_1_STOP_BITS 0x00
#define MXU1_UART_1_5_STOP_BITS 0x01
#define MXU1_UART_2_STOP_BITS 0x02
/* Bits per character */
#define MXU1_UART_5_DATA_BITS 0x00
#define MXU1_UART_6_DATA_BITS 0x01
#define MXU1_UART_7_DATA_BITS 0x02
#define MXU1_UART_8_DATA_BITS 0x03
/* Operation modes */
#define MXU1_UART_232 0x00
#define MXU1_UART_485_RECEIVER_DISABLED 0x01
#define MXU1_UART_485_RECEIVER_ENABLED 0x02
/* Pipe transfer mode and timeout */
#define MXU1_PIPE_MODE_CONTINUOUS 0x01
#define MXU1_PIPE_MODE_MASK 0x03
#define MXU1_PIPE_TIMEOUT_MASK 0x7C
#define MXU1_PIPE_TIMEOUT_ENABLE 0x80
/* Config struct */
struct mxu1_uart_config {
__be16 wBaudRate;
__be16 wFlags;
u8 bDataBits;
u8 bParity;
u8 bStopBits;
char cXon;
char cXoff;
u8 bUartMode;
} __packed;
/* Purge modes */
#define MXU1_PURGE_OUTPUT 0x00
#define MXU1_PURGE_INPUT 0x80
/* Read/Write data */
#define MXU1_RW_DATA_ADDR_SFR 0x10
#define MXU1_RW_DATA_ADDR_IDATA 0x20
#define MXU1_RW_DATA_ADDR_XDATA 0x30
#define MXU1_RW_DATA_ADDR_CODE 0x40
#define MXU1_RW_DATA_ADDR_GPIO 0x50
#define MXU1_RW_DATA_ADDR_I2C 0x60
#define MXU1_RW_DATA_ADDR_FLASH 0x70
#define MXU1_RW_DATA_ADDR_DSP 0x80
#define MXU1_RW_DATA_UNSPECIFIED 0x00
#define MXU1_RW_DATA_BYTE 0x01
#define MXU1_RW_DATA_WORD 0x02
#define MXU1_RW_DATA_DOUBLE_WORD 0x04
struct mxu1_write_data_bytes {
u8 bAddrType;
u8 bDataType;
u8 bDataCounter;
__be16 wBaseAddrHi;
__be16 wBaseAddrLo;
u8 bData[0];
} __packed;
/* Interrupt codes */
#define MXU1_CODE_HARDWARE_ERROR 0xFF
#define MXU1_CODE_DATA_ERROR 0x03
#define MXU1_CODE_MODEM_STATUS 0x04
static inline int mxu1_get_func_from_code(unsigned char code)
{
return code & 0x0f;
}
/* Download firmware max packet size */
#define MXU1_DOWNLOAD_MAX_PACKET_SIZE 64
/* Firmware image header */
struct mxu1_firmware_header {
__le16 wLength;
u8 bCheckSum;
} __packed;
#define MXU1_UART_BASE_ADDR 0xFFA0
#define MXU1_UART_OFFSET_MCR 0x0004
#define MXU1_BAUD_BASE 923077
#define MXU1_TRANSFER_TIMEOUT 2
#define MXU1_DOWNLOAD_TIMEOUT 1000
#define MXU1_DEFAULT_CLOSING_WAIT 4000 /* in .01 secs */
struct mxu1_port {
u8 msr;
u8 mcr;
u8 uart_mode;
spinlock_t spinlock; /* Protects msr */
struct mutex mutex; /* Protects mcr */
bool send_break;
};
struct mxu1_device {
u16 mxd_model;
};
static const struct usb_device_id mxu1_idtable[] = {
{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1110_PRODUCT_ID) },
{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1130_PRODUCT_ID) },
{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
{ }
};
MODULE_DEVICE_TABLE(usb, mxu1_idtable);
/* Write the given buffer out to the control pipe. */
static int mxu1_send_ctrl_data_urb(struct usb_serial *serial,
u8 request,
u16 value, u16 index,
void *data, size_t size)
{
int status;
status = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
request,
(USB_DIR_OUT | USB_TYPE_VENDOR |
USB_RECIP_DEVICE), value, index,
data, size,
USB_CTRL_SET_TIMEOUT);
if (status < 0) {
dev_err(&serial->interface->dev,
"%s - usb_control_msg failed: %d\n",
__func__, status);
return status;
}
if (status != size) {
dev_err(&serial->interface->dev,
"%s - short write (%d / %zd)\n",
__func__, status, size);
return -EIO;
}
return 0;
}
/* Send a vendor request without any data */
static int mxu1_send_ctrl_urb(struct usb_serial *serial,
u8 request, u16 value, u16 index)
{
return mxu1_send_ctrl_data_urb(serial, request, value, index,
NULL, 0);
}
static int mxu1_download_firmware(struct usb_serial *serial,
const struct firmware *fw_p)
{
int status = 0;
int buffer_size;
int pos;
int len;
int done;
u8 cs = 0;
u8 *buffer;
struct usb_device *dev = serial->dev;
struct mxu1_firmware_header *header;
unsigned int pipe;
pipe = usb_sndbulkpipe(dev, serial->port[0]->bulk_out_endpointAddress);
buffer_size = fw_p->size + sizeof(*header);
buffer = kmalloc(buffer_size, GFP_KERNEL);
if (!buffer)
return -ENOMEM;
memcpy(buffer, fw_p->data, fw_p->size);
memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size);
for (pos = sizeof(*header); pos < buffer_size; pos++)
cs = (u8)(cs + buffer[pos]);
header = (struct mxu1_firmware_header *)buffer;
header->wLength = cpu_to_le16(buffer_size - sizeof(*header));
header->bCheckSum = cs;
dev_dbg(&dev->dev, "%s - downloading firmware\n", __func__);
for (pos = 0; pos < buffer_size; pos += done) {
len = min(buffer_size - pos, MXU1_DOWNLOAD_MAX_PACKET_SIZE);
status = usb_bulk_msg(dev, pipe, buffer + pos, len, &done,
MXU1_DOWNLOAD_TIMEOUT);
if (status)
break;
}
kfree(buffer);
if (status) {
dev_err(&dev->dev, "failed to download firmware: %d\n", status);
return status;
}
msleep_interruptible(100);
usb_reset_device(dev);
dev_dbg(&dev->dev, "%s - download successful\n", __func__);
return 0;
}
static int mxu1_port_probe(struct usb_serial_port *port)
{
struct mxu1_port *mxport;
struct mxu1_device *mxdev;
if (!port->interrupt_in_urb) {
dev_err(&port->dev, "no interrupt urb\n");
return -ENODEV;
}
mxport = kzalloc(sizeof(struct mxu1_port), GFP_KERNEL);
if (!mxport)
return -ENOMEM;
spin_lock_init(&mxport->spinlock);
mutex_init(&mxport->mutex);
mxdev = usb_get_serial_data(port->serial);
switch (mxdev->mxd_model) {
case MXU1_1110_PRODUCT_ID:
case MXU1_1150_PRODUCT_ID:
case MXU1_1151_PRODUCT_ID:
mxport->uart_mode = MXU1_UART_232;
break;
case MXU1_1130_PRODUCT_ID:
case MXU1_1131_PRODUCT_ID:
mxport->uart_mode = MXU1_UART_485_RECEIVER_DISABLED;
break;
}
usb_set_serial_port_data(port, mxport);
port->port.closing_wait =
msecs_to_jiffies(MXU1_DEFAULT_CLOSING_WAIT * 10);
port->port.drain_delay = 1;
return 0;
}
static int mxu1_port_remove(struct usb_serial_port *port)
{
struct mxu1_port *mxport;
mxport = usb_get_serial_port_data(port);
kfree(mxport);
return 0;
}
static int mxu1_startup(struct usb_serial *serial)
{
struct mxu1_device *mxdev;
struct usb_device *dev = serial->dev;
struct usb_host_interface *cur_altsetting;
char fw_name[32];
const struct firmware *fw_p = NULL;
int err;
dev_dbg(&serial->interface->dev, "%s - product 0x%04X, num configurations %d, configuration value %d\n",
__func__, le16_to_cpu(dev->descriptor.idProduct),
dev->descriptor.bNumConfigurations,
dev->actconfig->desc.bConfigurationValue);
/* create device structure */
mxdev = kzalloc(sizeof(struct mxu1_device), GFP_KERNEL);
if (!mxdev)
return -ENOMEM;
usb_set_serial_data(serial, mxdev);
mxdev->mxd_model = le16_to_cpu(dev->descriptor.idProduct);
cur_altsetting = serial->interface->cur_altsetting;
/* if we have only 1 configuration, download firmware */
if (cur_altsetting->desc.bNumEndpoints == 1) {
snprintf(fw_name,
sizeof(fw_name),
"moxa/moxa-%04x.fw",
mxdev->mxd_model);
err = request_firmware(&fw_p, fw_name, &serial->interface->dev);
if (err) {
dev_err(&serial->interface->dev, "failed to request firmware: %d\n",
err);
goto err_free_mxdev;
}
err = mxu1_download_firmware(serial, fw_p);
if (err)
goto err_release_firmware;
/* device is being reset */
err = -ENODEV;
goto err_release_firmware;
}
return 0;
err_release_firmware:
release_firmware(fw_p);
err_free_mxdev:
kfree(mxdev);
return err;
}
static void mxu1_release(struct usb_serial *serial)
{
struct mxu1_device *mxdev;
mxdev = usb_get_serial_data(serial);
kfree(mxdev);
}
static int mxu1_write_byte(struct usb_serial_port *port, u32 addr,
u8 mask, u8 byte)
{
int status;
size_t size;
struct mxu1_write_data_bytes *data;
dev_dbg(&port->dev, "%s - addr 0x%08X, mask 0x%02X, byte 0x%02X\n",
__func__, addr, mask, byte);
size = sizeof(struct mxu1_write_data_bytes) + 2;
data = kzalloc(size, GFP_KERNEL);
if (!data)
return -ENOMEM;
data->bAddrType = MXU1_RW_DATA_ADDR_XDATA;
data->bDataType = MXU1_RW_DATA_BYTE;
data->bDataCounter = 1;
data->wBaseAddrHi = cpu_to_be16(addr >> 16);
data->wBaseAddrLo = cpu_to_be16(addr);
data->bData[0] = mask;
data->bData[1] = byte;
status = mxu1_send_ctrl_data_urb(port->serial, MXU1_WRITE_DATA, 0,
MXU1_RAM_PORT, data, size);
if (status < 0)
dev_err(&port->dev, "%s - failed: %d\n", __func__, status);
kfree(data);
return status;
}
static int mxu1_set_mcr(struct usb_serial_port *port, unsigned int mcr)
{
int status;
status = mxu1_write_byte(port,
MXU1_UART_BASE_ADDR + MXU1_UART_OFFSET_MCR,
MXU1_MCR_RTS | MXU1_MCR_DTR | MXU1_MCR_LOOP,
mcr);
return status;
}
static void mxu1_set_termios(struct tty_struct *tty,
struct usb_serial_port *port,
struct ktermios *old_termios)
{
struct mxu1_port *mxport = usb_get_serial_port_data(port);
struct mxu1_uart_config *config;
tcflag_t cflag, iflag;
speed_t baud;
int status;
unsigned int mcr;
cflag = tty->termios.c_cflag;
iflag = tty->termios.c_iflag;
if (old_termios &&
!tty_termios_hw_change(&tty->termios, old_termios) &&
tty->termios.c_iflag == old_termios->c_iflag) {
dev_dbg(&port->dev, "%s - nothing to change\n", __func__);
return;
}
dev_dbg(&port->dev,
"%s - cflag 0x%08x, iflag 0x%08x\n", __func__, cflag, iflag);
if (old_termios) {
dev_dbg(&port->dev, "%s - old cflag 0x%08x, old iflag 0x%08x\n",
__func__,
old_termios->c_cflag,
old_termios->c_iflag);
}
config = kzalloc(sizeof(*config), GFP_KERNEL);
if (!config)
return;
/* these flags must be set */
config->wFlags |= MXU1_UART_ENABLE_MS_INTS;
config->wFlags |= MXU1_UART_ENABLE_AUTO_START_DMA;
if (mxport->send_break)
config->wFlags |= MXU1_UART_SEND_BREAK_SIGNAL;
config->bUartMode = mxport->uart_mode;
switch (C_CSIZE(tty)) {
case CS5:
config->bDataBits = MXU1_UART_5_DATA_BITS;
break;
case CS6:
config->bDataBits = MXU1_UART_6_DATA_BITS;
break;
case CS7:
config->bDataBits = MXU1_UART_7_DATA_BITS;
break;
default:
case CS8:
config->bDataBits = MXU1_UART_8_DATA_BITS;
break;
}
if (C_PARENB(tty)) {
config->wFlags |= MXU1_UART_ENABLE_PARITY_CHECKING;
if (C_CMSPAR(tty)) {
if (C_PARODD(tty))
config->bParity = MXU1_UART_MARK_PARITY;
else
config->bParity = MXU1_UART_SPACE_PARITY;
} else {
if (C_PARODD(tty))
config->bParity = MXU1_UART_ODD_PARITY;
else
config->bParity = MXU1_UART_EVEN_PARITY;
}
} else {
config->bParity = MXU1_UART_NO_PARITY;
}
if (C_CSTOPB(tty))
config->bStopBits = MXU1_UART_2_STOP_BITS;
else
config->bStopBits = MXU1_UART_1_STOP_BITS;
if (C_CRTSCTS(tty)) {
/* RTS flow control must be off to drop RTS for baud rate B0 */
if (C_BAUD(tty) != B0)
config->wFlags |= MXU1_UART_ENABLE_RTS_IN;
config->wFlags |= MXU1_UART_ENABLE_CTS_OUT;
}
if (I_IXOFF(tty) || I_IXON(tty)) {
config->cXon = START_CHAR(tty);
config->cXoff = STOP_CHAR(tty);
if (I_IXOFF(tty))
config->wFlags |= MXU1_UART_ENABLE_X_IN;
if (I_IXON(tty))
config->wFlags |= MXU1_UART_ENABLE_X_OUT;
}
baud = tty_get_baud_rate(tty);
if (!baud)
baud = 9600;
config->wBaudRate = MXU1_BAUD_BASE / baud;
dev_dbg(&port->dev, "%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d\n",
__func__, baud, config->wBaudRate, config->wFlags,
config->bDataBits, config->bParity, config->bStopBits,
config->cXon, config->cXoff, config->bUartMode);
cpu_to_be16s(&config->wBaudRate);
cpu_to_be16s(&config->wFlags);
status = mxu1_send_ctrl_data_urb(port->serial, MXU1_SET_CONFIG, 0,
MXU1_UART1_PORT, config,
sizeof(*config));
if (status)
dev_err(&port->dev, "cannot set config: %d\n", status);
mutex_lock(&mxport->mutex);
mcr = mxport->mcr;
if (C_BAUD(tty) == B0)
mcr &= ~(MXU1_MCR_DTR | MXU1_MCR_RTS);
else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
mcr |= MXU1_MCR_DTR | MXU1_MCR_RTS;
status = mxu1_set_mcr(port, mcr);
if (status)
dev_err(&port->dev, "cannot set modem control: %d\n", status);
else
mxport->mcr = mcr;
mutex_unlock(&mxport->mutex);
kfree(config);
}
static int mxu1_get_serial_info(struct usb_serial_port *port,
struct serial_struct __user *ret_arg)
{
struct serial_struct ret_serial;
unsigned cwait;
if (!ret_arg)
return -EFAULT;
cwait = port->port.closing_wait;
if (cwait != ASYNC_CLOSING_WAIT_NONE)
cwait = jiffies_to_msecs(cwait) / 10;
memset(&ret_serial, 0, sizeof(ret_serial));
ret_serial.type = PORT_16550A;
ret_serial.line = port->minor;
ret_serial.port = 0;
ret_serial.xmit_fifo_size = port->bulk_out_size;
ret_serial.baud_base = MXU1_BAUD_BASE;
ret_serial.close_delay = 5*HZ;
ret_serial.closing_wait = cwait;
if (copy_to_user(ret_arg, &ret_serial, sizeof(*ret_arg)))
return -EFAULT;
return 0;
}
static int mxu1_set_serial_info(struct usb_serial_port *port,
struct serial_struct __user *new_arg)
{
struct serial_struct new_serial;
unsigned cwait;
if (copy_from_user(&new_serial, new_arg, sizeof(new_serial)))
return -EFAULT;
cwait = new_serial.closing_wait;
if (cwait != ASYNC_CLOSING_WAIT_NONE)
cwait = msecs_to_jiffies(10 * new_serial.closing_wait);
port->port.closing_wait = cwait;
return 0;
}
static int mxu1_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
switch (cmd) {
case TIOCGSERIAL:
return mxu1_get_serial_info(port,
(struct serial_struct __user *)arg);
case TIOCSSERIAL:
return mxu1_set_serial_info(port,
(struct serial_struct __user *)arg);
}
return -ENOIOCTLCMD;
}
static int mxu1_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct mxu1_port *mxport = usb_get_serial_port_data(port);
unsigned int result;
unsigned int msr;
unsigned int mcr;
unsigned long flags;
mutex_lock(&mxport->mutex);
spin_lock_irqsave(&mxport->spinlock, flags);
msr = mxport->msr;
mcr = mxport->mcr;
spin_unlock_irqrestore(&mxport->spinlock, flags);
mutex_unlock(&mxport->mutex);
result = ((mcr & MXU1_MCR_DTR) ? TIOCM_DTR : 0) |
((mcr & MXU1_MCR_RTS) ? TIOCM_RTS : 0) |
((mcr & MXU1_MCR_LOOP) ? TIOCM_LOOP : 0) |
((msr & MXU1_MSR_CTS) ? TIOCM_CTS : 0) |
((msr & MXU1_MSR_CD) ? TIOCM_CAR : 0) |
((msr & MXU1_MSR_RI) ? TIOCM_RI : 0) |
((msr & MXU1_MSR_DSR) ? TIOCM_DSR : 0);
dev_dbg(&port->dev, "%s - 0x%04X\n", __func__, result);
return result;
}
static int mxu1_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
struct mxu1_port *mxport = usb_get_serial_port_data(port);
int err;
unsigned int mcr;
mutex_lock(&mxport->mutex);
mcr = mxport->mcr;
if (set & TIOCM_RTS)
mcr |= MXU1_MCR_RTS;
if (set & TIOCM_DTR)
mcr |= MXU1_MCR_DTR;
if (set & TIOCM_LOOP)
mcr |= MXU1_MCR_LOOP;
if (clear & TIOCM_RTS)
mcr &= ~MXU1_MCR_RTS;
if (clear & TIOCM_DTR)
mcr &= ~MXU1_MCR_DTR;
if (clear & TIOCM_LOOP)
mcr &= ~MXU1_MCR_LOOP;
err = mxu1_set_mcr(port, mcr);
if (!err)
mxport->mcr = mcr;
mutex_unlock(&mxport->mutex);
return err;
}
static void mxu1_break(struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
struct mxu1_port *mxport = usb_get_serial_port_data(port);
if (break_state == -1)
mxport->send_break = true;
else
mxport->send_break = false;
mxu1_set_termios(tty, port, NULL);
}
static int mxu1_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct mxu1_port *mxport = usb_get_serial_port_data(port);
struct usb_serial *serial = port->serial;
int status;
u16 open_settings;
open_settings = (MXU1_PIPE_MODE_CONTINUOUS |
MXU1_PIPE_TIMEOUT_ENABLE |
(MXU1_TRANSFER_TIMEOUT << 2));
mxport->msr = 0;
status = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (status) {
dev_err(&port->dev, "failed to submit interrupt urb: %d\n",
status);
return status;
}
if (tty)
mxu1_set_termios(tty, port, NULL);
status = mxu1_send_ctrl_urb(serial, MXU1_OPEN_PORT,
open_settings, MXU1_UART1_PORT);
if (status) {
dev_err(&port->dev, "cannot send open command: %d\n", status);
goto unlink_int_urb;
}
status = mxu1_send_ctrl_urb(serial, MXU1_START_PORT,
0, MXU1_UART1_PORT);
if (status) {
dev_err(&port->dev, "cannot send start command: %d\n", status);
goto unlink_int_urb;
}
status = mxu1_send_ctrl_urb(serial, MXU1_PURGE_PORT,
MXU1_PURGE_INPUT, MXU1_UART1_PORT);
if (status) {
dev_err(&port->dev, "cannot clear input buffers: %d\n",
status);
goto unlink_int_urb;
}
status = mxu1_send_ctrl_urb(serial, MXU1_PURGE_PORT,
MXU1_PURGE_OUTPUT, MXU1_UART1_PORT);
if (status) {
dev_err(&port->dev, "cannot clear output buffers: %d\n",
status);
goto unlink_int_urb;
}
/*
* reset the data toggle on the bulk endpoints to work around bug in
* host controllers where things get out of sync some times
*/
usb_clear_halt(serial->dev, port->write_urb->pipe);
usb_clear_halt(serial->dev, port->read_urb->pipe);
if (tty)
mxu1_set_termios(tty, port, NULL);
status = mxu1_send_ctrl_urb(serial, MXU1_OPEN_PORT,
open_settings, MXU1_UART1_PORT);
if (status) {
dev_err(&port->dev, "cannot send open command: %d\n", status);
goto unlink_int_urb;
}
status = mxu1_send_ctrl_urb(serial, MXU1_START_PORT,
0, MXU1_UART1_PORT);
if (status) {
dev_err(&port->dev, "cannot send start command: %d\n", status);
goto unlink_int_urb;
}
status = usb_serial_generic_open(tty, port);
if (status)
goto unlink_int_urb;
return 0;
unlink_int_urb:
usb_kill_urb(port->interrupt_in_urb);
return status;
}
static void mxu1_close(struct usb_serial_port *port)
{
int status;
usb_serial_generic_close(port);
usb_kill_urb(port->interrupt_in_urb);
status = mxu1_send_ctrl_urb(port->serial, MXU1_CLOSE_PORT,
0, MXU1_UART1_PORT);
if (status) {
dev_err(&port->dev, "failed to send close port command: %d\n",
status);
}
}
static void mxu1_handle_new_msr(struct usb_serial_port *port, u8 msr)
{
struct mxu1_port *mxport = usb_get_serial_port_data(port);
struct async_icount *icount;
unsigned long flags;
dev_dbg(&port->dev, "%s - msr 0x%02X\n", __func__, msr);
spin_lock_irqsave(&mxport->spinlock, flags);
mxport->msr = msr & MXU1_MSR_MASK;
spin_unlock_irqrestore(&mxport->spinlock, flags);
if (msr & MXU1_MSR_DELTA_MASK) {
icount = &port->icount;
if (msr & MXU1_MSR_DELTA_CTS)
icount->cts++;
if (msr & MXU1_MSR_DELTA_DSR)
icount->dsr++;
if (msr & MXU1_MSR_DELTA_CD)
icount->dcd++;
if (msr & MXU1_MSR_DELTA_RI)
icount->rng++;
wake_up_interruptible(&port->port.delta_msr_wait);
}
}
static void mxu1_interrupt_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
unsigned char *data = urb->transfer_buffer;
int length = urb->actual_length;
int function;
int status;
u8 msr;
switch (urb->status) {
case 0:
break;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
dev_dbg(&port->dev, "%s - urb shutting down: %d\n",
__func__, urb->status);
return;
default:
dev_dbg(&port->dev, "%s - nonzero urb status: %d\n",
__func__, urb->status);
goto exit;
}
if (length != 2) {
dev_dbg(&port->dev, "%s - bad packet size: %d\n",
__func__, length);
goto exit;
}
if (data[0] == MXU1_CODE_HARDWARE_ERROR) {
dev_err(&port->dev, "hardware error: %d\n", data[1]);
goto exit;
}
function = mxu1_get_func_from_code(data[0]);
dev_dbg(&port->dev, "%s - function %d, data 0x%02X\n",
__func__, function, data[1]);
switch (function) {
case MXU1_CODE_DATA_ERROR:
dev_dbg(&port->dev, "%s - DATA ERROR, data 0x%02X\n",
__func__, data[1]);
break;
case MXU1_CODE_MODEM_STATUS:
msr = data[1];
mxu1_handle_new_msr(port, msr);
break;
default:
dev_err(&port->dev, "unknown interrupt code: 0x%02X\n",
data[1]);
break;
}
exit:
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
dev_err(&port->dev, "resubmit interrupt urb failed: %d\n",
status);
}
}
static struct usb_serial_driver mxu11x0_device = {
.driver = {
.owner = THIS_MODULE,
.name = "mxu11x0",
},
.description = "MOXA UPort 11x0",
.id_table = mxu1_idtable,
.num_ports = 1,
.port_probe = mxu1_port_probe,
.port_remove = mxu1_port_remove,
.attach = mxu1_startup,
.release = mxu1_release,
.open = mxu1_open,
.close = mxu1_close,
.ioctl = mxu1_ioctl,
.set_termios = mxu1_set_termios,
.tiocmget = mxu1_tiocmget,
.tiocmset = mxu1_tiocmset,
.tiocmiwait = usb_serial_generic_tiocmiwait,
.get_icount = usb_serial_generic_get_icount,
.break_ctl = mxu1_break,
.read_int_callback = mxu1_interrupt_callback,
};
static struct usb_serial_driver *const serial_drivers[] = {
&mxu11x0_device, NULL
};
module_usb_serial_driver(serial_drivers, mxu1_idtable);
MODULE_AUTHOR("Mathieu Othacehe <m.othacehe@gmail.com>");
MODULE_DESCRIPTION("MOXA UPort 11x0 USB to Serial Hub Driver");
MODULE_LICENSE("GPL");
MODULE_FIRMWARE("moxa/moxa-1110.fw");
MODULE_FIRMWARE("moxa/moxa-1130.fw");
MODULE_FIRMWARE("moxa/moxa-1131.fw");
MODULE_FIRMWARE("moxa/moxa-1150.fw");
MODULE_FIRMWARE("moxa/moxa-1151.fw");
...@@ -270,6 +270,7 @@ static void option_instat_callback(struct urb *urb); ...@@ -270,6 +270,7 @@ static void option_instat_callback(struct urb *urb);
#define TELIT_PRODUCT_UE910_V2 0x1012 #define TELIT_PRODUCT_UE910_V2 0x1012
#define TELIT_PRODUCT_LE922_USBCFG0 0x1042 #define TELIT_PRODUCT_LE922_USBCFG0 0x1042
#define TELIT_PRODUCT_LE922_USBCFG3 0x1043 #define TELIT_PRODUCT_LE922_USBCFG3 0x1043
#define TELIT_PRODUCT_LE922_USBCFG5 0x1045
#define TELIT_PRODUCT_LE920 0x1200 #define TELIT_PRODUCT_LE920 0x1200
#define TELIT_PRODUCT_LE910 0x1201 #define TELIT_PRODUCT_LE910 0x1201
...@@ -1132,6 +1133,8 @@ static const struct usb_device_id option_ids[] = { ...@@ -1132,6 +1133,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9003), /* Quectel UC20 */
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003), { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003),
...@@ -1183,6 +1186,8 @@ static const struct usb_device_id option_ids[] = { ...@@ -1183,6 +1186,8 @@ static const struct usb_device_id option_ids[] = {
.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 }, .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG3), { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG3),
.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 }, .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG5, 0xff),
.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910), { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
.driver_info = (kernel_ulong_t)&telit_le910_blacklist }, .driver_info = (kernel_ulong_t)&telit_le910_blacklist },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920), { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920),
......
...@@ -157,14 +157,17 @@ static const struct usb_device_id id_table[] = { ...@@ -157,14 +157,17 @@ static const struct usb_device_id id_table[] = {
{DEVICE_SWI(0x1199, 0x9056)}, /* Sierra Wireless Modem */ {DEVICE_SWI(0x1199, 0x9056)}, /* Sierra Wireless Modem */
{DEVICE_SWI(0x1199, 0x9060)}, /* Sierra Wireless Modem */ {DEVICE_SWI(0x1199, 0x9060)}, /* Sierra Wireless Modem */
{DEVICE_SWI(0x1199, 0x9061)}, /* Sierra Wireless Modem */ {DEVICE_SWI(0x1199, 0x9061)}, /* Sierra Wireless Modem */
{DEVICE_SWI(0x1199, 0x9070)}, /* Sierra Wireless MC74xx/EM74xx */ {DEVICE_SWI(0x1199, 0x9070)}, /* Sierra Wireless MC74xx */
{DEVICE_SWI(0x1199, 0x9071)}, /* Sierra Wireless MC74xx/EM74xx */ {DEVICE_SWI(0x1199, 0x9071)}, /* Sierra Wireless MC74xx */
{DEVICE_SWI(0x1199, 0x9078)}, /* Sierra Wireless EM74xx */
{DEVICE_SWI(0x1199, 0x9079)}, /* Sierra Wireless EM74xx */
{DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81a3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81a8)}, /* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a8)}, /* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81a9)}, /* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a9)}, /* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81b1)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81b1)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81b3)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */
/* Huawei devices */ /* Huawei devices */
{DEVICE_HWI(0x03f0, 0x581d)}, /* HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) */ {DEVICE_HWI(0x03f0, 0x581d)}, /* HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment