i2c: i801: Add Device IDs for Intel Sunrise Point PCH

This patch adds the I2C/SMBus Device IDs for the Intel Sunrise Point PCH.
Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Documentation/i2c/busses/i2c-i801

@@ -28,6 +28,7 @@ Supported adapters:
   * Intel Wildcat Point (PCH)
   * Intel Wildcat Point-LP (PCH)
   * Intel BayTrail (SOC)
+  * Intel Sunrise Point-H (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller

drivers/i2c/busses/Kconfig

@@ -122,6 +122,7 @@ config I2C_I801
 	    Wildcat Point (PCH)
 	    Wildcat Point-LP (PCH)
 	    BayTrail (SOC)
+	    Sunrise Point-H (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.

drivers/i2c/busses/i2c-i801.c

@@ -62,6 +62,7 @@
  * Wildcat Point (PCH)		0x8ca2	32	hard	yes	yes	yes
  * Wildcat Point-LP (PCH)	0x9ca2	32	hard	yes	yes	yes
  * BayTrail (SOC)		0x0f12	32	hard	yes	yes	yes
+ * Sunrise Point-H (PCH) 	0xa123  32	hard	yes	yes	yes
  *
  * Features supported by this driver:
  * Software PEC				no
@@ -184,6 +185,7 @@
 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2		0x8d7f
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS		0x9c22
 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS	0x9ca2
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS	0xa123
 
 struct i801_mux_config {
 	char *gpio_chip;
@@ -830,6 +832,7 @@ static const struct pci_device_id i801_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) },
 	{ 0, }
 };