mt76: mt7615: fix using VHT STBC rates

The hardware expects MT_TX_RATE_NSS to be filled with the number of
space/time streams. For non-STBC rates, this is equal to nss.
For 1-stream STBC, this needs to be set to 2.
This is relevant for VHT rates only, on HT, the value is derived from MCS
internally.
Signed-off-by: Felix Fietkau <nbd@nbd.name>

drivers/net/wireless/mediatek/mt76/mt7615/mac.c

@@ -254,7 +254,7 @@ mt7615_mac_tx_rate_val(struct mt7615_dev *dev,
 		       bool stbc, u8 *bw)
 {
 	u8 phy, nss, rate_idx;
-	u16 rateval;
+	u16 rateval = 0;
 
 	*bw = 0;
 
@@ -292,13 +292,15 @@ mt7615_mac_tx_rate_val(struct mt7615_dev *dev,
 		rate_idx = val & 0xff;
 	}
 
-	rateval = (FIELD_PREP(MT_TX_RATE_IDX, rate_idx) |
+	if (stbc && nss == 1) {
+		nss++;
+		rateval |= MT_TX_RATE_STBC;
+	}
+
+	rateval |= (FIELD_PREP(MT_TX_RATE_IDX, rate_idx) |
 		    FIELD_PREP(MT_TX_RATE_MODE, phy) |
 		    FIELD_PREP(MT_TX_RATE_NSS, nss - 1));
 
-	if (stbc && nss == 1)
-		rateval |= MT_TX_RATE_STBC;
-
 	return rateval;
 }
 
@@ -771,6 +773,10 @@ static bool mt7615_fill_txs(struct mt7615_dev *dev, struct mt7615_sta *sta,
 		break;
 	case MT_PHY_TYPE_VHT:
 		final_nss = FIELD_GET(MT_TX_RATE_NSS, final_rate);
+
+		if ((final_rate & MT_TX_RATE_STBC) && final_nss)
+			final_nss--;
+
 		final_rate_flags |= IEEE80211_TX_RC_VHT_MCS;
 		final_rate = (final_rate & MT_TX_RATE_IDX) | (final_nss << 4);
 		break;