Merge tag 'tegra-for-4.4-dt' of...

Merge tag 'tegra-for-4.4-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

ARM: tegra: Devicetree changes for v4.4-rc1

Mostly a bunch of updates to the Toradex Apalis and Colibri platforms
along with a couple of cleanup patches.

* tag 'tegra-for-4.4-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (25 commits)
  ARM: tegra: Use consistent indentation for SATA node
  ARM: tegra: colibri-eval: Fix power/wakeup key
  ARM: tegra: colibri-eval: Add comment concerning SD/MMC
  ARM: tegra: colibri-eval: Fix vendor string of M41T0M6 RTC
  ARM: tegra: colibri: Properly align pin names
  ARM: tegra: colibri: Replace eMMC label by comment
  ARM: tegra: colibri: Activate STMPE811 touch controller
  ARM: tegra: colibri: Add touch pen interrupt pin muxing
  ARM: tegra: colibri: Fix comment about 3v3 fixed supply
  ARM: tegra: colibri: Add pin muxing for on-module power I2C
  ARM: tegra: colibri: Improve comment about thermal alert pin
  ARM: tegra: colibri: Fix HDMI supplies
  ARM: tegra: colibri: Update hardware revisions compatibility
  ARM: tegra: apalis-eval: Fix power/wakeup key
  ARM: tegra: apalis-eval: Fix backlight PWM comment
  ARM: tegra: apalis-eval: Set OTG dr_mode
  ARM: tegra: apalis-eval: Enable HDA controller
  ARM: tegra: apalis: Properly align pin names
  ARM: tegra: apalis: Add digital audio pin muxing
  ARM: tegra: apalis: Add comment concerning eMMC
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/tegra124-nyan.dtsi

@@ -159,7 +159,7 @@ regulators {
 				vin-ldo9-10-supply = <&vdd_5v0_sys>;
 				vin-ldo11-supply = <&vdd_3v3_run>;
 
-				sd0 {
+				vdd_cpu: sd0 {
 					regulator-name = "+VDD_CPU_AP";
 					regulator-min-microvolt = <700000>;
 					regulator-max-microvolt = <1350000>;
@@ -397,6 +397,13 @@ sdhci@0,700b0600 { /* eMMC on this bus */
 		non-removable;
 	};
 
+	/* CPU DFLL clock */
+	clock@0,70110000 {
+		status = "okay";
+		vdd-cpu-supply = <&vdd_cpu>;
+		nvidia,i2c-fs-rate = <400000>;
+	};
+
 	ahub@0,70300000 {
 		i2s@0,70301100 {
 			status = "okay";
@@ -487,6 +494,12 @@ clk32k_in: clock@0 {
 		};
 	};
 
+	cpus {
+		cpu@0 {
+			vdd-cpu-supply = <&vdd_cpu>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 

arch/arm/boot/dts/tegra124.dtsi

@@ -608,26 +608,20 @@ emc: emc@0,7001b000 {
 
 	sata@0,70020000 {
 		compatible = "nvidia,tegra124-ahci";
-
 		reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */
 		      <0x0 0x70020000 0x0 0x7000>; /* SATA */
-
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-
 		clocks = <&tegra_car TEGRA124_CLK_SATA>,
 			 <&tegra_car TEGRA124_CLK_SATA_OOB>,
 			 <&tegra_car TEGRA124_CLK_CML1>,
 			 <&tegra_car TEGRA124_CLK_PLL_E>;
 		clock-names = "sata", "sata-oob", "cml1", "pll_e";
-
 		resets = <&tegra_car 124>,
 			 <&tegra_car 123>,
 			 <&tegra_car 129>;
 		reset-names = "sata", "sata-oob", "sata-cold";
-
 		phys = <&padctl TEGRA_XUSB_PADCTL_SATA>;
 		phy-names = "sata-phy";
-
 		status = "disabled";
 	};
 

arch/arm/boot/dts/tegra30-apalis-eval.dts

@@ -126,6 +126,10 @@ spidev1: spidev@2 {
 		};
 	};
 
+	hda@70030000 {
+		status = "okay";
+	};
+
 	sd1: sdhci@78000000 {
 		status = "okay";
 		bus-width = <4>;
@@ -149,6 +153,7 @@ usb@7d000000 {
 
 	usb-phy@7d000000 {
 		status = "okay";
+		dr_mode = "otg";
 		vbus-supply = <&usbo1_vbus_reg>;
 	};
 
@@ -175,7 +180,7 @@ usb-phy@7d008000 {
 	backlight: backlight {
 		compatible = "pwm-backlight";
 
-		/* PWM0 */
+		/* PWM_BKL1 */
 		pwms = <&pwm 0 5000000>;
 		brightness-levels = <255 231 223 207 191 159 127 0>;
 		default-brightness-level = <6>;
@@ -186,10 +191,10 @@ backlight: backlight {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
-			label = "Power";
+		wakeup {
+			label = "WAKE1_MICO";
 			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
+			linux,code = <KEY_WAKEUP>;
 			debounce-interval = <10>;
 			gpio-key,wakeup;
 		};

arch/arm/boot/dts/tegra30-apalis.dtsi

 #include "tegra30.dtsi"
 
 /*
- * Toradex Apalis T30 Device Tree
- * Compatible for Revisions 1GB: V1.0A; 2GB: V1.0B, V1.0C
+ * Toradex Apalis T30 Module Device Tree
+ * Compatible for Revisions 1GB: V1.0A, V1.1A; 1GB IT: V1.1A;
+ * 2GB: V1.0B, V1.0C, V1.0E, V1.1A
  */
 / {
 	model = "Toradex Apalis T30";
@@ -33,8 +34,8 @@ pci@3,0 {
 
 	host1x@50000000 {
 		hdmi@54280000 {
-			vdd-supply = <&sys_3v3_reg>;
-			pll-supply = <&vio_reg>;
+			vdd-supply = <&avdd_hdmi_3v3_reg>;
+			pll-supply = <&avdd_hdmi_pll_1v8_reg>;
 
 			nvidia,hpd-gpio =
 				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
@@ -65,7 +66,7 @@ uart3_rts_n_pc0 {
 			/* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */
 			uart3_cts_n_pa1 {
 				nvidia,pins = "uart3_cts_n_pa1";
-				nvidia,function = "rsvd1";
+				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
@@ -108,6 +109,30 @@ spi2_cs2_n_pw3 {
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
 
+			/* Apalis Digital Audio */
+			clk1_req_pee2 {
+				nvidia,pins = "clk1_req_pee2";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0",
+					      "dap1_din_pn1",
+					      "dap1_dout_pn2",
+					      "dap1_sclk_pn3";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
 			/* Apalis I2C3 */
 			cam_i2c_scl_pbb1 {
 				nvidia,pins = "cam_i2c_scl_pbb1",
@@ -151,32 +176,32 @@ pv3 {
 			};
 
 			/* Apalis PWM1 */
-			gpio_pu6 {
-				nvidia,pins =	"gpio_pu6";
+			pu6 {
+				nvidia,pins = "pu6";
 				nvidia,function = "pwm3";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
 			/* Apalis PWM2 */
-			gpio_pu5 {
-				nvidia,pins =	"gpio_pu5";
+			pu5 {
+				nvidia,pins = "pu5";
 				nvidia,function = "pwm2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
 			/* Apalis PWM3 */
-			gpio_pu4 {
-				nvidia,pins =	"gpio_pu4";
+			pu4 {
+				nvidia,pins = "pu4";
 				nvidia,function = "pwm1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
 			/* Apalis PWM4 */
-			gpio_pu3 {
-				nvidia,pins =	"gpio_pu3";
+			pu3 {
+				nvidia,pins = "pu3";
 				nvidia,function = "pwm0";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -635,6 +660,7 @@ pmc@7000e400 {
 		nvidia,sys-clock-req-active-high;
 	};
 
+	/* eMMC */
 	sdhci@78000600 {
 		status = "okay";
 		bus-width = <8>;
@@ -666,18 +692,40 @@ regulators {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		sys_3v3_reg: regulator@100 {
+		avdd_hdmi_pll_1v8_reg: regulator@100 {
 			compatible = "regulator-fixed";
 			reg = <100>;
+			regulator-name = "+V1.8_AVDD_HDMI_PLL";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			enable-active-high;
+			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+			vin-supply = <&vio_reg>;
+		};
+
+		sys_3v3_reg: regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
 			regulator-name = "3v3";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
 
-		charge_pump_5v0_reg: regulator@101 {
+		avdd_hdmi_3v3_reg: regulator@102 {
 			compatible = "regulator-fixed";
-			reg = <101>;
+			reg = <102>;
+			regulator-name = "+V3.3_AVDD_HDMI";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		charge_pump_5v0_reg: regulator@103 {
+			compatible = "regulator-fixed";
+			reg = <103>;
 			regulator-name = "5v0";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;

arch/arm/boot/dts/tegra30-colibri-eval-v3.dts

@@ -55,7 +55,7 @@ i2c@7000c000 {
 
 		/* M41T0M6 real time clock on carrier board */
 		rtc@68 {
-			compatible = "stm,m41t00";
+			compatible = "st,m41t00";
 			reg = <0x68>;
 		};
 	};
@@ -84,6 +84,7 @@ spidev0: spi@1 {
 		};
 	};
 
+	/* SD/MMC */
 	sdhci@78000200 {
 		status = "okay";
 		bus-width = <4>;
@@ -136,10 +137,10 @@ clk16m: clk@1 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
-			label = "Power";
+		wakeup {
+			label = "SODIMM pin 45 wakeup";
 			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_POWER>;
+			linux,code = <KEY_WAKEUP>;
 			debounce-interval = <10>;
 			gpio-key,wakeup;
 		};

arch/arm/boot/dts/tegra30-colibri.dtsi

@@ -2,8 +2,8 @@
 #include "tegra30.dtsi"
 
 /*
- * Toradex Colibri T30 Device Tree
- * Compatible for Revisions 1.1B/1.1C/1.1D
+ * Toradex Colibri T30 Module Device Tree
+ * Compatible for Revisions V1.1B, V1.1C, V1.1D, V1.1E; IT: V1.1A
  */
 / {
 	model = "Toradex Colibri T30";
@@ -15,8 +15,8 @@ memory {
 
 	host1x@50000000 {
 		hdmi@54280000 {
-			vdd-supply = <&sys_3v3_reg>;
-			pll-supply = <&vio_reg>;
+			vdd-supply = <&avdd_hdmi_3v3_reg>;
+			pll-supply = <&avdd_hdmi_pll_1v8_reg>;
 
 			nvidia,hpd-gpio =
 				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
@@ -66,15 +66,6 @@ lcd_m1_pw1 {
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
 
-			/* Thermal alert, need to be disabled */
-			lcd_dc1_pd2 {
-				nvidia,pins = "lcd_dc1_pd2";
-				nvidia,function = "rsvd3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
 			/* Colibri MMC */
 			kb_row10_ps2 {
 				nvidia,pins = "kb_row10_ps2";
@@ -167,6 +158,40 @@ sdmmc4_dat0_paa0 {
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
+
+			/* Power I2C (On-module) */
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * THERMD_ALERT#, unlatched I2C address pin of LM95245
+			 * temperature sensor therefore requires disabling for
+			 * now
+			 */
+			lcd_dc1_pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* TOUCH_PEN_INT# */
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
 		};
 	};
 
@@ -236,7 +261,7 @@ vio_reg: vio {
 				/*
 				 * EN_+V3.3 switching via FET:
 				 * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
-				 * see also v3_3 fixed supply
+				 * see also 3v3 fixed supply
 				 */
 				ldo2_reg: ldo2 {
 					regulator-name = "en_3v3";
@@ -295,6 +320,46 @@ ldo8_reg: ldo8 {
 			};
 		};
 
+		/* STMPE811 touch screen controller */
+		stmpe811@41 {
+			compatible = "st,stmpe811";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x41>;
+			interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&gpio>;
+			interrupt-controller;
+			id = <0>;
+			blocks = <0x5>;
+			irq-trigger = <0x1>;
+
+			stmpe_touchscreen {
+				compatible = "st,stmpe-ts";
+				reg = <0>;
+				/* 3.25 MHz ADC clock speed */
+				st,adc-freq = <1>;
+				/* 8 sample average control */
+				st,ave-ctrl = <3>;
+				/* 7 length fractional part in z */
+				st,fraction-z = <7>;
+				/*
+				 * 50 mA typical 80 mA max touchscreen drivers
+				 * current limit value
+				 */
+				st,i-drive = <1>;
+				/* 12-bit ADC */
+				st,mod-12b = <1>;
+				/* internal ADC reference */
+				st,ref-sel = <0>;
+				/* ADC converstion time: 80 clocks */
+				st,sample-time = <4>;
+				/* 1 ms panel driver settling time */
+				st,settling = <3>;
+				/* 5 ms touch detect interrupt delay */
+				st,touch-det-delay = <5>;
+			};
+		};
+
 		/*
 		 * LM95245 temperature sensor
 		 * Note: OVERT_N directly connected to PMIC PWRDN
@@ -331,7 +396,8 @@ pmc@7000e400 {
 		nvidia,sys-clock-req-active-high;
 	};
 
-	emmc: sdhci@78000600 {
+	/* eMMC */
+	sdhci@78000600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
@@ -365,18 +431,40 @@ regulators {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		sys_3v3_reg: regulator@100 {
+		avdd_hdmi_pll_1v8_reg: regulator@100 {
 			compatible = "regulator-fixed";
 			reg = <100>;
+			regulator-name = "+V1.8_AVDD_HDMI_PLL";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			enable-active-high;
+			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+			vin-supply = <&vio_reg>;
+		};
+
+		sys_3v3_reg: regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
 			regulator-name = "3v3";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
 
-		charge_pump_5v0_reg: regulator@101 {
+		avdd_hdmi_3v3_reg: regulator@102 {
 			compatible = "regulator-fixed";
-			reg = <101>;
+			reg = <102>;
+			regulator-name = "+V3.3_AVDD_HDMI";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		charge_pump_5v0_reg: regulator@103 {
+			compatible = "regulator-fixed";
+			reg = <103>;
 			regulator-name = "5v0";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;