Merge remote-tracking branch 'regulator/for-5.9' into regulator-next

Documentation/devicetree/bindings/regulator/da9211.txt

@@ -15,6 +15,8 @@ Required properties:
 Optional properties:
 - enable-gpios: platform gpio for control of BUCKA/BUCKB.
 - Any optional property defined in regulator.txt
+  - regulator-initial-mode and regulator-allowed-modes may be specified using
+    mode values from dt-bindings/regulator/dlg,da9211-regulator.h
 
 Example 1) DA9211
 	pmic: da9211@68 {
@@ -30,6 +32,8 @@ Example 1) DA9211
 				regulator-min-microamp 	= <2000000>;
 				regulator-max-microamp 	= <5000000>;
 				enable-gpios = <&gpio 27 0>;
+				regulator-allowed-modes = <DA9211_BUCK_MODE_SYNC
+							   DA9211_BUCK_MODE_AUTO>;
 			};
 		};
 	};

Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/google,cros-ec-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS EC controlled voltage regulators
+
+maintainers:
+  - Pi-Hsun Shih <pihsun@chromium.org>
+
+description:
+  Any property defined as part of the core regulator binding, defined in
+  regulator.yaml, can also be used.
+
+allOf:
+  - $ref: "regulator.yaml#"
+
+properties:
+  compatible:
+    const: google,cros-ec-regulator
+
+  reg:
+    maxItems: 1
+    description: Identifier for the voltage regulator to ChromeOS EC.
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cros_ec: ec@0 {
+            compatible = "google,cros-ec-spi";
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            regulator@0 {
+                compatible = "google,cros-ec-regulator";
+                regulator-min-microvolt = <1800000>;
+                regulator-max-microvolt = <3300000>;
+                reg = <0>;
+            };
+        };
+    };
+...

Documentation/devicetree/bindings/regulator/lp872x.txt

@@ -37,8 +37,8 @@ Optional properties:
     (Documentation/devicetree/bindings/regulator/regulator.txt)
 
 Datasheet
-  - LP8720: http://www.ti.com/lit/ds/symlink/lp8720.pdf
-  - LP8725: http://www.ti.com/lit/ds/symlink/lp8725.pdf
+  - LP8720: https://www.ti.com/lit/ds/symlink/lp8720.pdf
+  - LP8725: https://www.ti.com/lit/ds/symlink/lp8725.pdf
 
 Example 1) LP8720
 

Documentation/devicetree/bindings/regulator/mt6397-regulator.txt

@@ -16,6 +16,9 @@ LDO:
   ldo_vemc3v3, ldo_vgp1, ldo_vgp2, ldo_vgp3, ldo_vgp4, ldo_vgp5, ldo_vgp6,
   ldo_vibr
 
+BUCK regulators can set regulator-initial-mode and regulator-allowed-modes to
+values specified in dt-bindings/regulator/mediatek,mt6397-regulator.h
+
 Example:
 	pmic {
 		compatible = "mediatek,mt6397";

Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/nxp,pca9450-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCA9450A/B/C Power Management Integrated Circuit regulators
+
+maintainers:
+  - Robin Gong <yibin.gong@nxp.com>
+
+description: |
+  Regulator nodes should be named to BUCK_<number> and LDO_<number>. The
+  definition for each of these nodes is defined using the standard
+  binding for regulators at
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+  Datasheet is available at
+  https://www.nxp.com/docs/en/data-sheet/PCA9450DS.pdf
+
+#The valid names for PCA9450 regulator nodes are:
+#BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6,
+#LDO1, LDO2, LDO3, LDO4, LDO5
+#Note: Buck3 removed on PCA9450B and connect with Buck1 on PCA9450C.
+
+properties:
+  compatible:
+    enum:
+      - nxp,pca9450a
+      - nxp,pca9450b
+      - nxp,pca9450c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description: |
+      list of regulators provided by this controller
+
+    patternProperties:
+      "^LDO[1-5]$":
+        type: object
+        $ref: regulator.yaml#
+        description:
+          Properties for single LDO regulator.
+
+        properties:
+          regulator-name:
+            pattern: "^LDO[1-5]$"
+            description:
+              should be "LDO1", ..., "LDO5"
+
+        unevaluatedProperties: false
+
+      "^BUCK[1-6]$":
+        type: object
+        $ref: regulator.yaml#
+        description:
+          Properties for single BUCK regulator.
+
+        properties:
+          regulator-name:
+            pattern: "^BUCK[1-6]$"
+            description:
+              should be "BUCK1", ..., "BUCK6"
+
+          nxp,dvs-run-voltage:
+            $ref: "/schemas/types.yaml#/definitions/uint32"
+            minimum: 600000
+            maximum: 2187500
+            description:
+              PMIC default "RUN" state voltage in uV. Only Buck1~3 have such
+              dvs(dynamic voltage scaling) property.
+
+          nxp,dvs-standby-voltage:
+            $ref: "/schemas/types.yaml#/definitions/uint32"
+            minimum: 600000
+            maximum: 2187500
+            description:
+              PMIC default "STANDBY" state voltage in uV. Only Buck1~3 have such
+              dvs(dynamic voltage scaling) property.
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@25 {
+            compatible = "nxp,pca9450b";
+            reg = <0x25>;
+            pinctrl-0 = <&pinctrl_pmic>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+            regulators {
+                buck1: BUCK1 {
+                    regulator-name = "BUCK1";
+                    regulator-min-microvolt = <600000>;
+                    regulator-max-microvolt = <2187500>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                    regulator-ramp-delay = <3125>;
+                };
+                buck2: BUCK2 {
+                    regulator-name = "BUCK2";
+                    regulator-min-microvolt = <600000>;
+                    regulator-max-microvolt = <2187500>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                    regulator-ramp-delay = <3125>;
+                    nxp,dvs-run-voltage = <950000>;
+                    nxp,dvs-standby-voltage = <850000>;
+                };
+                buck4: BUCK4 {
+                    regulator-name = "BUCK4";
+                    regulator-min-microvolt = <600000>;
+                    regulator-max-microvolt = <3400000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+                buck5: BUCK5 {
+                    regulator-name = "BUCK5";
+                    regulator-min-microvolt = <600000>;
+                    regulator-max-microvolt = <3400000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+                buck6: BUCK6 {
+                    regulator-name = "BUCK6";
+                    regulator-min-microvolt = <600000>;
+                    regulator-max-microvolt = <3400000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo1: LDO1 {
+                    regulator-name = "LDO1";
+                    regulator-min-microvolt = <1600000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+                ldo2: LDO2 {
+                    regulator-name = "LDO2";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1150000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+                ldo3: LDO3 {
+                    regulator-name = "LDO3";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+                ldo4: LDO4 {
+                    regulator-name = "LDO4";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+                ldo5: LDO5 {
+                    regulator-name = "LDO5";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+            };
+        };
+    };

Documentation/devicetree/bindings/regulator/onnn,fan53880.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/onnn,fan53880.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Onsemi FAN53880 PMIC
+
+maintainers:
+  - Christoph Fritz <chf.fritz@googlemail.com>
+
+description: |
+  The FAN53880 is an I2C porgrammable power management IC (PMIC)
+  that contains a BUCK (step-down converter), four low dropouts (LDO)
+  and one BOOST (step-up converter) output. It is designed for mobile
+  power applications.
+
+properties:
+  $nodename:
+    pattern: "pmic@[0-9a-f]{1,2}"
+  compatible:
+    enum:
+      - onnn,fan53880
+
+  reg:
+    maxItems: 1
+
+  VIN12-supply:
+    description: Input supply phandle(s) for LDO1 and LDO2
+
+  VIN3-supply:
+    description: Input supply phandle(s) for LDO3
+
+  VIN4-supply:
+    description: Input supply phandle(s) for LDO4
+
+  PVIN-supply:
+    description: Input supply phandle(s) for BUCK and BOOST
+
+  regulators:
+    type: object
+    $ref: regulator.yaml#
+    description: |
+      list of regulators provided by this controller, must be named
+      after their hardware counterparts LDO[1-4], BUCK and BOOST
+
+    patternProperties:
+      "^LDO[1-4]$":
+        type: object
+        $ref: regulator.yaml#
+
+      "^BUCK|BOOST$":
+        type: object
+        $ref: regulator.yaml#
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@35 {
+            compatible = "onnn,fan53880";
+            reg = <0x35>;
+
+            PVIN-supply = <&fixreg_example_vcc>;
+
+            regulators {
+                BUCK {
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <1200000>;
+                };
+            };
+       };
+     };
+...

Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt

-QCOM SMD RPM REGULATOR
-
-The Qualcomm RPM over SMD regulator is modelled as a subdevice of the RPM.
-Because SMD is used as the communication transport mechanism, the RPM resides as
-a subnode of the SMD.  As such, the SMD-RPM regulator requires that the SMD and
-RPM nodes be present.
-
-Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt for
-information pertaining to the SMD node.
-
-Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt for
-information regarding the RPM node.
-
-== Regulator
-
-Regulator nodes are identified by their compatible:
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,rpm-pm8841-regulators"
-		    "qcom,rpm-pm8916-regulators"
-		    "qcom,rpm-pm8941-regulators"
-		    "qcom,rpm-pm8950-regulators"
-		    "qcom,rpm-pm8994-regulators"
-		    "qcom,rpm-pm8998-regulators"
-		    "qcom,rpm-pma8084-regulators"
-		    "qcom,rpm-pmi8994-regulators"
-		    "qcom,rpm-pmi8998-regulators"
-		    "qcom,rpm-pms405-regulators"
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_s7-supply:
-- vdd_s8-supply:
-	Usage: optional (pm8841 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_l1_l2_l3-supply:
-- vdd_l4_l5_l6-supply:
-- vdd_l7-supply:
-- vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18-supply:
-	Usage: optional (pm8916 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_l1_l19-supply:
-- vdd_l2_l23-supply:
-- vdd_l3-supply:
-- vdd_l4_l5_l6_l7_l16-supply:
-- vdd_l8_l11_l12_l17_l22-supply:
-- vdd_l9_l10_l13_l14_l15_l18-supply:
-- vdd_l20-supply:
-- vdd_l21-supply:
-	Usage: optional (pm8950 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_l1_l3-supply:
-- vdd_l2_lvs1_2_3-supply:
-- vdd_l4_l11-supply:
-- vdd_l5_l7-supply:
-- vdd_l6_l12_l14_l15-supply:
-- vdd_l8_l16_l18_l19-supply:
-- vdd_l9_l10_l17_l22-supply:
-- vdd_l13_l20_l23_l24-supply:
-- vdd_l21-supply:
-- vin_5vs-supply:
-	Usage: optional (pm8941 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_s7-supply:
-- vdd_s8-supply:
-- vdd_s9-supply:
-- vdd_s10-supply:
-- vdd_s11-supply:
-- vdd_s12-supply:
-- vdd_l1-supply:
-- vdd_l2_l26_l28-supply:
-- vdd_l3_l11-supply:
-- vdd_l4_l27_l31-supply:
-- vdd_l5_l7-supply:
-- vdd_l6_l12_l32-supply:
-- vdd_l5_l7-supply:
-- vdd_l8_l16_l30-supply:
-- vdd_l9_l10_l18_l22-supply:
-- vdd_l9_l10_l18_l22-supply:
-- vdd_l3_l11-supply:
-- vdd_l6_l12_l32-supply:
-- vdd_l13_l19_l23_l24-supply:
-- vdd_l14_l15-supply:
-- vdd_l14_l15-supply:
-- vdd_l8_l16_l30-supply:
-- vdd_l17_l29-supply:
-- vdd_l9_l10_l18_l22-supply:
-- vdd_l13_l19_l23_l24-supply:
-- vdd_l20_l21-supply:
-- vdd_l20_l21-supply:
-- vdd_l9_l10_l18_l22-supply:
-- vdd_l13_l19_l23_l24-supply:
-- vdd_l13_l19_l23_l24-supply:
-- vdd_l25-supply:
-- vdd_l2_l26_l28-supply:
-- vdd_l4_l27_l31-supply:
-- vdd_l2_l26_l28-supply:
-- vdd_l17_l29-supply:
-- vdd_l8_l16_l30-supply:
-- vdd_l4_l27_l31-supply:
-- vdd_l6_l12_l32-supply:
-- vdd_lvs1_2-supply:
-	Usage: optional (pm8994 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_bst_byp-supply:
-	Usage: optional (pmi8994 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_s7-supply:
-- vdd_s8-supply:
-- vdd_s9-supply:
-- vdd_s10-supply:
-- vdd_s11-supply:
-- vdd_s12-supply:
-- vdd_s13-supply:
-- vdd_l1_l27-supply:
-- vdd_l20_l24-supply:
-- vdd_l26-supply:
-- vdd_l2_l8_l17-supply:
-- vdd_l3_l11-supply:
-- vdd_l4_l5-supply:
-- vdd_l6-supply:
-- vdd_l7_l12_l14_l15-supply:
-- vdd_l9-supply:
-- vdd_l10_l23_l25-supply:
-- vdd_l13_l19_l21-supply:
-- vdd_l16_l28-supply:
-- vdd_l18_l22-supply:
-- vdd_lvs1_lvs2-supply:
-	Usage: optional (pmi8998 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_s7-supply:
-- vdd_s8-supply:
-- vdd_s9-supply:
-- vdd_s10-supply:
-- vdd_s11-supply:
-- vdd_s12-supply:
-- vdd_l1_l11-supply:
-- vdd_l2_l3_l4_l27-supply:
-- vdd_l5_l7-supply:
-- vdd_l6_l12_l14_l15_l26-supply:
-- vdd_l8-supply:
-- vdd_l9_l10_l13_l20_l23_l24-supply:
-- vdd_l16_l25-supply:
-- vdd_l17-supply:
-- vdd_l18-supply:
-- vdd_l19-supply:
-- vdd_l21-supply:
-- vdd_l22-supply:
-	Usage: optional (pma8084 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_bob-supply:
-	Usage: optional (pmi8998 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_l1_l2-supply:
-- vdd_l3_l8-supply:
-- vdd_l4-supply:
-- vdd_l5_l6-supply:
-- vdd_l7-supply:
-- vdd_l3_l8-supply:
-- vdd_l9-supply:
-- vdd_l10_l11_l12_l13-supply:
-	Usage: optional (pms405 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-The regulator node houses sub-nodes for each regulator within the device. Each
-sub-node is identified using the node's name, with valid values listed for each
-of the pmics below.
-
-pm8841:
-	s1, s2, s3, s4, s5, s6, s7, s8
-
-pm8916:
-	s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
-	l14, l15, l16, l17, l18
-
-pm8941:
-	s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
-	l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2,
-	lvs3, 5vs1, 5vs2
-
-pm8994:
-	s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5,
-	l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,
-	l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2
-
-pm8998:
-	s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, s13, l1, l2, l3, l4,
-	l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19,
-	l20, l21, l22, l23, l24, l25, l26, l27, l28, lvs1, lvs2
-
-pma8084:
-	s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5,
-	l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,
-	l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1
-
-pmi8994:
-	s1, s2, s3, boost-bypass
-
-pmi8998:
-	bob
-
-pms405:
-	s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12,
-	l13
-
-The content of each sub-node is defined by the standard binding for regulators -
-see regulator.txt.
-
-= EXAMPLE
-
-	smd {
-		compatible = "qcom,smd";
-
-		rpm {
-			interrupts = <0 168 1>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm_requests {
-				compatible = "qcom,rpm-msm8974";
-				qcom,smd-channels = "rpm_requests";
-
-				pm8941-regulators {
-					compatible = "qcom,rpm-pm8941-regulators";
-					vdd_l13_l20_l23_l24-supply = <&pm8941_boost>;
-
-					pm8941_s3: s3 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					pm8941_boost: s4 {
-						regulator-min-microvolt = <5000000>;
-						regulator-max-microvolt = <5000000>;
-					};
-
-					pm8941_l20: l20 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-					};
-				};
-			};
-		};
-	};

Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/qcom,smd-rpm-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QCOM SMD RPM REGULATOR
+
+description:
+  The Qualcomm RPM over SMD regulator is modelled as a subdevice of the RPM.
+  Because SMD is used as the communication transport mechanism, the RPM
+  resides as a subnode of the SMD.  As such, the SMD-RPM regulator requires
+  that the SMD and RPM nodes be present.
+
+  Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt for
+  information pertaining to the SMD node.
+
+  Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
+  for information regarding the RPM node.
+
+  The regulator node houses sub-nodes for each regulator within the device.
+  Each sub-node is identified using the node's name, with valid values listed
+  for each of the pmics below.
+
+  For mp5496, s2
+
+  For pm8841, s1, s2, s3, s4, s5, s6, s7, s8
+
+  For pm8916, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+  l12, l13, l14, l15, l16, l17, l18
+
+  For pm8941, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+  l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2,
+  lvs3, 5vs1, 5vs2
+
+  For pm8994, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3,
+  l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19,
+  l20, l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2
+
+  For pm8998, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, s13, l1, l2,
+  l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19,
+  l20, l21, l22, l23, l24, l25, l26, l27, l28, lvs1, lvs2
+
+  For pma8084, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3,
+  l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19,
+  l20, l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1
+
+  For pmi8994, s1, s2, s3, boost-bypass
+
+  For pmi8998, bob
+
+  For pms405, s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+  l12, l13
+
+maintainers:
+  - Kathiravan T <kathirav@codeaurora.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,rpm-mp5496-regulators
+      - qcom,rpm-pm8841-regulators
+      - qcom,rpm-pm8916-regulators
+      - qcom,rpm-pm8941-regulators
+      - qcom,rpm-pm8950-regulators
+      - qcom,rpm-pm8994-regulators
+      - qcom,rpm-pm8998-regulators
+      - qcom,rpm-pma8084-regulators
+      - qcom,rpm-pmi8994-regulators
+      - qcom,rpm-pmi8998-regulators
+      - qcom,rpm-pms405-regulators
+
+patternProperties:
+  ".*-supply$":
+    description: Input supply phandle(s) for this node
+
+  "^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$":
+    description: List of regulators and its properties
+    allOf:
+     - $ref: regulator.yaml#
+
+additionalProperties: false
+
+required:
+  - compatible
+
+examples:
+  - |
+    pm8941-regulators {
+        compatible = "qcom,rpm-pm8941-regulators";
+        vdd_l13_l20_l23_l24-supply = <&pm8941_boost>;
+
+        pm8941_s3: s3 {
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+        };
+
+        pm8941_boost: s4 {
+            regulator-min-microvolt = <5000000>;
+            regulator-max-microvolt = <5000000>;
+        };
+
+        pm8941_l20: l20 {
+            regulator-min-microvolt = <2950000>;
+            regulator-max-microvolt = <2950000>;
+        };
+    };
+...

Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/qcom,usb-vbus-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The Qualcomm PMIC VBUS output regulator driver
+
+maintainers:
+  - Wesley Cheng <wcheng@codeaurora.org>
+
+description: |
+  This regulator driver controls the VBUS output by the Qualcomm PMIC.  This
+  regulator will be enabled in situations where the device is required to
+  provide power to the connected peripheral.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8150b-vbus-reg
+
+  reg:
+    maxItems: 1
+    description: VBUS output base address
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+     pm8150b {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pm8150b_vbus: dcdc@1100 {
+            compatible = "qcom,pm8150b-vbus-reg";
+            reg = <0x1100>;
+        };
+     };
+...

Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/qcom-labibb-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's LAB(LCD AMOLED Boost)/IBB(Inverting Buck Boost) Regulator
+
+maintainers:
+  - Sumit Semwal <sumit.semwal@linaro.org>
+
+description:
+  LAB can be used as a positive boost power supply and IBB can be used as a
+  negative boost power supply for display panels. Currently implemented for
+  pmi8998.
+
+properties:
+  compatible:
+    const: qcom,pmi8998-lab-ibb
+
+  lab:
+    type: object
+
+    properties:
+
+      interrupts:
+        maxItems: 1
+        description:
+          Short-circuit interrupt for lab.
+
+    required:
+    - interrupts
+
+  ibb:
+    type: object
+
+    properties:
+
+      interrupts:
+        maxItems: 1
+        description:
+          Short-circuit interrupt for lab.
+
+    required:
+    - interrupts
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    labibb {
+      compatible = "qcom,pmi8998-lab-ibb";
+
+      lab {
+        interrupts = <0x3 0x0 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "sc-err";
+      };
+
+      ibb {
+        interrupts = <0x3 0x2 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "sc-err";
+      };
+    };
+
+...

Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/silergy,sy8827n.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: silergy sy8827n PMIC
+
+maintainers:
+  - Jisheng Zhang <jszhang@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - silergy,sy8827n
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: GPIO to enable/disable the regulator.
+    maxItems: 1
+
+  silergy,vsel-state-high:
+    type: boolean
+    description:
+      Indicates if the VSEL pin is set to high.
+      If this property is missing, assume the VSEL pin is set to low.
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        regulator@60 {
+          compatible = "silergy,sy8827n";
+          reg = <0x60>;
+        };
+    };
+
+...

drivers/platform/chrome/cros_ec_trace.c

@@ -161,6 +161,11 @@
 	TRACE_SYMBOL(EC_CMD_ADC_READ), \
 	TRACE_SYMBOL(EC_CMD_ROLLBACK_INFO), \
 	TRACE_SYMBOL(EC_CMD_AP_RESET), \
+	TRACE_SYMBOL(EC_CMD_REGULATOR_GET_INFO), \
+	TRACE_SYMBOL(EC_CMD_REGULATOR_ENABLE), \
+	TRACE_SYMBOL(EC_CMD_REGULATOR_IS_ENABLED), \
+	TRACE_SYMBOL(EC_CMD_REGULATOR_SET_VOLTAGE), \
+	TRACE_SYMBOL(EC_CMD_REGULATOR_GET_VOLTAGE), \
 	TRACE_SYMBOL(EC_CMD_CR51_BASE), \
 	TRACE_SYMBOL(EC_CMD_CR51_LAST), \
 	TRACE_SYMBOL(EC_CMD_FP_PASSTHRU), \

drivers/regulator/Kconfig

@@ -238,6 +238,16 @@ config REGULATOR_CPCAP
 	  Say y here for CPCAP regulator found on some Motorola phones
 	  and tablets such as Droid 4.
 
+config REGULATOR_CROS_EC
+	tristate "ChromeOS EC regulators"
+	depends on CROS_EC && OF
+	help
+	  This driver supports voltage regulators that is connected to ChromeOS
+	  EC and controlled through EC host commands.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called cros-ec-regulator.
+
 config REGULATOR_DA903X
 	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
 	depends on PMIC_DA903X
@@ -326,6 +336,16 @@ config REGULATOR_FAN53555
 	  input voltage supply of 2.5V to 5.5V. The output voltage is
 	  programmed through an I2C interface.
 
+config REGULATOR_FAN53880
+	tristate "Fairchild FAN53880 Regulator"
+	depends on I2C && (OF || COMPILE_TEST)
+	select REGMAP_I2C
+	help
+	  This driver supports Fairchild (ON Semiconductor) FAN53880
+	  regulator. The regulator is a programmable power management IC
+	  (PMIC), it is controlled by I2C and provides one BUCK, one BOOST
+	  and four LDO outputs.
+
 config REGULATOR_GPIO
 	tristate "GPIO regulator support"
 	depends on GPIOLIB || COMPILE_TEST
@@ -730,6 +750,14 @@ config REGULATOR_PBIAS
 	 This driver provides support for OMAP pbias modelled
 	 regulators.
 
+config REGULATOR_PCA9450
+	tristate "NXP PCA9450A/PCA9450B/PCA9450C regulator driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say y here to support the NXP PCA9450A/PCA9450B/PCA9450C PMIC
+	  regulator driver.
+
 config REGULATOR_PCAP
 	tristate "Motorola PCAP2 regulator driver"
 	depends on EZX_PCAP
@@ -826,6 +854,16 @@ config REGULATOR_QCOM_SPMI
 	  Qualcomm SPMI PMICs as a module. The module will be named
 	  "qcom_spmi-regulator".
 
+config REGULATOR_QCOM_USB_VBUS
+	tristate "Qualcomm USB Vbus regulator driver"
+	depends on SPMI || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for the
+	  regulator used to enable the VBUS output.
+
+	  Say M here if you want to include support for enabling the VBUS output
+	  as a module. The module will be named "qcom_usb_vbus_regulator".
+
 config REGULATOR_RC5T583
 	tristate "RICOH RC5T583 Power regulators"
 	depends on MFD_RC5T583
@@ -989,6 +1027,13 @@ config REGULATOR_SY8824X
 	help
 	  This driver supports SY8824C single output regulator.
 
+config REGULATOR_SY8827N
+	tristate "Silergy SY8827N regulator"
+	depends on I2C && (OF || COMPILE_TEST)
+	select REGMAP_I2C
+	help
+	  This driver supports SY8827N single output regulator.
+
 config REGULATOR_TPS51632
 	tristate "TI TPS51632 Power Regulator"
 	depends on I2C
@@ -1178,5 +1223,15 @@ config REGULATOR_WM8994
 	  This driver provides support for the voltage regulators on the
 	  WM8994 CODEC.
 
+config REGULATOR_QCOM_LABIBB
+	tristate "QCOM LAB/IBB regulator support"
+	depends on SPMI || COMPILE_TEST
+	help
+	  This driver supports Qualcomm's LAB/IBB regulators present on the
+	  Qualcomm's PMIC chip pmi8998. QCOM LAB and IBB are SPMI
+	  based PMIC implementations. LAB can be used as positive
+	  boost regulator and IBB can be used as a negative boost regulator
+	  for LCD display panel.
+
 endif
 

drivers/regulator/Makefile

@@ -13,6 +13,7 @@ obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
 obj-$(CONFIG_REGULATOR_88PG86X) += 88pg86x.o
 obj-$(CONFIG_REGULATOR_88PM800) += 88pm800-regulator.o
 obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
+obj-$(CONFIG_REGULATOR_CROS_EC) += cros-ec-regulator.o
 obj-$(CONFIG_REGULATOR_CPCAP) += cpcap-regulator.o
 obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
 obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
@@ -41,6 +42,7 @@ obj-$(CONFIG_REGULATOR_DA9211) += da9211-regulator.o
 obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o
 obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
 obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o
+obj-$(CONFIG_REGULATOR_FAN53880) += fan53880.o
 obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
 obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o
 obj-$(CONFIG_REGULATOR_HI6421V530) += hi6421v530-regulator.o
@@ -88,11 +90,14 @@ obj-$(CONFIG_REGULATOR_MT6323)	+= mt6323-regulator.o
 obj-$(CONFIG_REGULATOR_MT6358)	+= mt6358-regulator.o
 obj-$(CONFIG_REGULATOR_MT6380)	+= mt6380-regulator.o
 obj-$(CONFIG_REGULATOR_MT6397)	+= mt6397-regulator.o
+obj-$(CONFIG_REGULATOR_QCOM_LABIBB) += qcom-labibb-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
+obj-$(CONFIG_REGULATOR_QCOM_USB_VBUS) += qcom_usb_vbus-regulator.o
 obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
+obj-$(CONFIG_REGULATOR_PCA9450) += pca9450-regulator.o
 obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
 obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o
 obj-$(CONFIG_REGULATOR_PV88080) += pv88080-regulator.o
@@ -120,6 +125,7 @@ obj-$(CONFIG_REGULATOR_STPMIC1) += stpmic1_regulator.o
 obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o
 obj-$(CONFIG_REGULATOR_SY8106A) += sy8106a-regulator.o
 obj-$(CONFIG_REGULATOR_SY8824X) += sy8824x.o
+obj-$(CONFIG_REGULATOR_SY8827N) += sy8827n.o
 obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o
 obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o
 obj-$(CONFIG_REGULATOR_TPS62360) += tps62360-regulator.o

drivers/regulator/ab8500.c

@@ -59,6 +59,7 @@ struct ab8500_shared_mode {
  * @voltage_bank: bank to control regulator voltage
  * @voltage_reg: register to control regulator voltage
  * @voltage_mask: mask to control regulator voltage
+ * @expand_register: 
  */
 struct ab8500_regulator_info {
 	struct device		*dev;
@@ -79,12 +80,6 @@ struct ab8500_regulator_info {
 	u8 voltage_bank;
 	u8 voltage_reg;
 	u8 voltage_mask;
-	struct {
-		u8 voltage_limit;
-		u8 voltage_bank;
-		u8 voltage_reg;
-		u8 voltage_mask;
-	} expand_register;
 };
 
 /* voltage tables for the vauxn/vintcore supplies */

drivers/regulator/anatop-regulator.c

@@ -139,7 +139,7 @@ static struct regulator_ops anatop_rops = {
 	.map_voltage = regulator_map_voltage_linear,
 };
 
-static struct regulator_ops anatop_core_rops = {
+static const struct regulator_ops anatop_core_rops = {
 	.enable = anatop_regmap_enable,
 	.disable = anatop_regmap_disable,
 	.is_enabled = anatop_regmap_is_enabled,

drivers/regulator/core.c

@@ -105,6 +105,7 @@ static int regulator_balance_voltage(struct regulator_dev *rdev,
 static struct regulator *create_regulator(struct regulator_dev *rdev,
 					  struct device *dev,
 					  const char *supply_name);
+static void destroy_regulator(struct regulator *regulator);
 static void _regulator_put(struct regulator *regulator);
 
 const char *rdev_get_name(struct regulator_dev *rdev)
@@ -2034,20 +2035,9 @@ struct regulator *regulator_get_optional(struct device *dev, const char *id)
 }
 EXPORT_SYMBOL_GPL(regulator_get_optional);
 
-/* regulator_list_mutex lock held by regulator_put() */
-static void _regulator_put(struct regulator *regulator)
+static void destroy_regulator(struct regulator *regulator)
 {
-	struct regulator_dev *rdev;
-
-	if (IS_ERR_OR_NULL(regulator))
-		return;
-
-	lockdep_assert_held_once(&regulator_list_mutex);
-
-	/* Docs say you must disable before calling regulator_put() */
-	WARN_ON(regulator->enable_count);
-
-	rdev = regulator->rdev;
+	struct regulator_dev *rdev = regulator->rdev;
 
 	debugfs_remove_recursive(regulator->debugfs);
 
@@ -2068,6 +2058,24 @@ static void _regulator_put(struct regulator *regulator)
 
 	kfree_const(regulator->supply_name);
 	kfree(regulator);
+}
+
+/* regulator_list_mutex lock held by regulator_put() */
+static void _regulator_put(struct regulator *regulator)
+{
+	struct regulator_dev *rdev;
+
+	if (IS_ERR_OR_NULL(regulator))
+		return;
+
+	lockdep_assert_held_once(&regulator_list_mutex);
+
+	/* Docs say you must disable before calling regulator_put() */
+	WARN_ON(regulator->enable_count);
+
+	rdev = regulator->rdev;
+
+	destroy_regulator(regulator);
 
 	module_put(rdev->owner);
 	put_device(&rdev->dev);
@@ -2347,6 +2355,37 @@ static void _regulator_enable_delay(unsigned int delay)
 		udelay(us);
 }
 
+/**
+ * _regulator_check_status_enabled
+ *
+ * A helper function to check if the regulator status can be interpreted
+ * as 'regulator is enabled'.
+ * @rdev: the regulator device to check
+ *
+ * Return:
+ * * 1			- if status shows regulator is in enabled state
+ * * 0			- if not enabled state
+ * * Error Value	- as received from ops->get_status()
+ */
+static inline int _regulator_check_status_enabled(struct regulator_dev *rdev)
+{
+	int ret = rdev->desc->ops->get_status(rdev);
+
+	if (ret < 0) {
+		rdev_info(rdev, "get_status returned error: %d\n", ret);
+		return ret;
+	}
+
+	switch (ret) {
+	case REGULATOR_STATUS_OFF:
+	case REGULATOR_STATUS_ERROR:
+	case REGULATOR_STATUS_UNDEFINED:
+		return 0;
+	default:
+		return 1;
+	}
+}
+
 static int _regulator_do_enable(struct regulator_dev *rdev)
 {
 	int ret, delay;
@@ -2407,7 +2446,37 @@ static int _regulator_do_enable(struct regulator_dev *rdev)
 	 * together.  */
 	trace_regulator_enable_delay(rdev_get_name(rdev));
 
+	/* If poll_enabled_time is set, poll upto the delay calculated
+	 * above, delaying poll_enabled_time uS to check if the regulator
+	 * actually got enabled.
+	 * If the regulator isn't enabled after enable_delay has
+	 * expired, return -ETIMEDOUT.
+	 */
+	if (rdev->desc->poll_enabled_time) {
+		unsigned int time_remaining = delay;
+
+		while (time_remaining > 0) {
+			_regulator_enable_delay(rdev->desc->poll_enabled_time);
+
+			if (rdev->desc->ops->get_status) {
+				ret = _regulator_check_status_enabled(rdev);
+				if (ret < 0)
+					return ret;
+				else if (ret)
+					break;
+			} else if (rdev->desc->ops->is_enabled(rdev))
+				break;
+
+			time_remaining -= rdev->desc->poll_enabled_time;
+		}
+
+		if (time_remaining <= 0) {
+			rdev_err(rdev, "Enabled check timed out\n");
+			return -ETIMEDOUT;
+		}
+	} else {
 		_regulator_enable_delay(delay);
+	}
 
 	trace_regulator_enable_complete(rdev_get_name(rdev));
 
@@ -5023,7 +5092,6 @@ regulator_register(const struct regulator_desc *regulator_desc,
 	struct regulator_dev *rdev;
 	bool dangling_cfg_gpiod = false;
 	bool dangling_of_gpiod = false;
-	bool reg_device_fail = false;
 	struct device *dev;
 	int ret, i;
 
@@ -5152,10 +5220,12 @@ regulator_register(const struct regulator_desc *regulator_desc,
 	}
 
 	/* register with sysfs */
+	device_initialize(&rdev->dev);
 	rdev->dev.class = &regulator_class;
 	rdev->dev.parent = dev;
 	dev_set_name(&rdev->dev, "regulator.%lu",
 		    (unsigned long) atomic_inc_return(&regulator_no));
+	dev_set_drvdata(&rdev->dev, rdev);
 
 	/* set regulator constraints */
 	if (init_data)
@@ -5206,12 +5276,9 @@ regulator_register(const struct regulator_desc *regulator_desc,
 	    !rdev->desc->fixed_uV)
 		rdev->is_switch = true;
 
-	dev_set_drvdata(&rdev->dev, rdev);
-	ret = device_register(&rdev->dev);
-	if (ret != 0) {
-		reg_device_fail = true;
+	ret = device_add(&rdev->dev);
+	if (ret != 0)
 		goto unset_supplies;
-	}
 
 	rdev_init_debugfs(rdev);
 
@@ -5233,16 +5300,14 @@ regulator_register(const struct regulator_desc *regulator_desc,
 	mutex_unlock(&regulator_list_mutex);
 wash:
 	kfree(rdev->coupling_desc.coupled_rdevs);
-	kfree(rdev->constraints);
 	mutex_lock(&regulator_list_mutex);
 	regulator_ena_gpio_free(rdev);
 	mutex_unlock(&regulator_list_mutex);
+	put_device(&rdev->dev);
+	rdev = NULL;
 clean:
 	if (dangling_of_gpiod)
 		gpiod_put(config->ena_gpiod);
-	if (reg_device_fail)
-		put_device(&rdev->dev);
-	else
 	kfree(rdev);
 	kfree(config);
 rinse:

drivers/regulator/cpcap-regulator.c

@@ -89,7 +89,7 @@
  */
 #define CPCAP_REG_OFF_MODE_SEC		BIT(15)
 
-/**
+/*
  * SoC specific configuration for CPCAP regulator. There are at least three
  * different SoCs each with their own parameters: omap3, omap4 and tegra2.
  *
@@ -169,7 +169,7 @@ enum cpcap_regulator_id {
 static int cpcap_regulator_enable(struct regulator_dev *rdev)
 {
 	struct cpcap_regulator *regulator = rdev_get_drvdata(rdev);
-	int error, ignore;
+	int error;
 
 	error = regulator_enable_regmap(rdev);
 	if (error)
@@ -180,7 +180,7 @@ static int cpcap_regulator_enable(struct regulator_dev *rdev)
 					   regulator->assign_mask,
 					   regulator->assign_mask);
 		if (error)
-			ignore = regulator_disable_regmap(rdev);
+			regulator_disable_regmap(rdev);
 	}
 
 	return error;
@@ -193,7 +193,7 @@ static int cpcap_regulator_enable(struct regulator_dev *rdev)
 static int cpcap_regulator_disable(struct regulator_dev *rdev)
 {
 	struct cpcap_regulator *regulator = rdev_get_drvdata(rdev);
-	int error, ignore;
+	int error;
 
 	if (rdev->desc->enable_val & CPCAP_REG_OFF_MODE_SEC) {
 		error = regmap_update_bits(rdev->regmap, regulator->assign_reg,
@@ -204,7 +204,7 @@ static int cpcap_regulator_disable(struct regulator_dev *rdev)
 
 	error = regulator_disable_regmap(rdev);
 	if (error && (rdev->desc->enable_val & CPCAP_REG_OFF_MODE_SEC)) {
-		ignore = regmap_update_bits(rdev->regmap, regulator->assign_reg,
+		regmap_update_bits(rdev->regmap, regulator->assign_reg,
 				   regulator->assign_mask,
 				   regulator->assign_mask);
 	}
@@ -256,7 +256,7 @@ static int cpcap_regulator_set_mode(struct regulator_dev *rdev,
 				  CPCAP_BIT_AUDIO_LOW_PWR, value);
 }
 
-static struct regulator_ops cpcap_regulator_ops = {
+static const struct regulator_ops cpcap_regulator_ops = {
 	.enable = cpcap_regulator_enable,
 	.disable = cpcap_regulator_disable,
 	.is_enabled = regulator_is_enabled_regmap,
@@ -325,7 +325,7 @@ static const unsigned int vvib_val_tbl[] = { 1300000, 1800000, 2000000,
 static const unsigned int vusb_val_tbl[] = { 0, 3300000, };
 static const unsigned int vaudio_val_tbl[] = { 0, 2775000, };
 
-/**
+/*
  * SoC specific configuration for omap4. The data below is comes from Motorola
  * Linux kernel tree. It's basically the values of cpcap_regltr_data,
  * cpcap_regulator_mode_values and cpcap_regulator_off_mode_values, see

drivers/regulator/cros-ec-regulator.c

+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Copyright 2020 Google LLC.
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_data/cros_ec_proto.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/slab.h>
+
+struct cros_ec_regulator_data {
+	struct regulator_desc desc;
+	struct regulator_dev *dev;
+	struct cros_ec_device *ec_dev;
+
+	u32 index;
+
+	u16 *voltages_mV;
+	u16 num_voltages;
+};
+
+static int cros_ec_cmd(struct cros_ec_device *ec, u32 version, u32 command,
+		       void *outdata, u32 outsize, void *indata, u32 insize)
+{
+	struct cros_ec_command *msg;
+	int ret;
+
+	msg = kzalloc(sizeof(*msg) + max(outsize, insize), GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	msg->version = version;
+	msg->command = command;
+	msg->outsize = outsize;
+	msg->insize = insize;
+
+	if (outdata && outsize > 0)
+		memcpy(msg->data, outdata, outsize);
+
+	ret = cros_ec_cmd_xfer_status(ec, msg);
+	if (ret < 0)
+		goto cleanup;
+
+	if (insize)
+		memcpy(indata, msg->data, insize);
+
+cleanup:
+	kfree(msg);
+	return ret;
+}
+
+static int cros_ec_regulator_enable(struct regulator_dev *dev)
+{
+	struct cros_ec_regulator_data *data = rdev_get_drvdata(dev);
+	struct ec_params_regulator_enable cmd = {
+		.index = data->index,
+		.enable = 1,
+	};
+
+	return cros_ec_cmd(data->ec_dev, 0, EC_CMD_REGULATOR_ENABLE, &cmd,
+			  sizeof(cmd), NULL, 0);
+}
+
+static int cros_ec_regulator_disable(struct regulator_dev *dev)
+{
+	struct cros_ec_regulator_data *data = rdev_get_drvdata(dev);
+	struct ec_params_regulator_enable cmd = {
+		.index = data->index,
+		.enable = 0,
+	};
+
+	return cros_ec_cmd(data->ec_dev, 0, EC_CMD_REGULATOR_ENABLE, &cmd,
+			  sizeof(cmd), NULL, 0);
+}
+
+static int cros_ec_regulator_is_enabled(struct regulator_dev *dev)
+{
+	struct cros_ec_regulator_data *data = rdev_get_drvdata(dev);
+	struct ec_params_regulator_is_enabled cmd = {
+		.index = data->index,
+	};
+	struct ec_response_regulator_is_enabled resp;
+	int ret;
+
+	ret = cros_ec_cmd(data->ec_dev, 0, EC_CMD_REGULATOR_IS_ENABLED, &cmd,
+			  sizeof(cmd), &resp, sizeof(resp));
+	if (ret < 0)
+		return ret;
+	return resp.enabled;
+}
+
+static int cros_ec_regulator_list_voltage(struct regulator_dev *dev,
+					  unsigned int selector)
+{
+	struct cros_ec_regulator_data *data = rdev_get_drvdata(dev);
+
+	if (selector >= data->num_voltages)
+		return -EINVAL;
+
+	return data->voltages_mV[selector] * 1000;
+}
+
+static int cros_ec_regulator_get_voltage(struct regulator_dev *dev)
+{
+	struct cros_ec_regulator_data *data = rdev_get_drvdata(dev);
+	struct ec_params_regulator_get_voltage cmd = {
+		.index = data->index,
+	};
+	struct ec_response_regulator_get_voltage resp;
+	int ret;
+
+	ret = cros_ec_cmd(data->ec_dev, 0, EC_CMD_REGULATOR_GET_VOLTAGE, &cmd,
+			  sizeof(cmd), &resp, sizeof(resp));
+	if (ret < 0)
+		return ret;
+	return resp.voltage_mv * 1000;
+}
+
+static int cros_ec_regulator_set_voltage(struct regulator_dev *dev, int min_uV,
+					 int max_uV, unsigned int *selector)
+{
+	struct cros_ec_regulator_data *data = rdev_get_drvdata(dev);
+	int min_mV = DIV_ROUND_UP(min_uV, 1000);
+	int max_mV = max_uV / 1000;
+	struct ec_params_regulator_set_voltage cmd = {
+		.index = data->index,
+		.min_mv = min_mV,
+		.max_mv = max_mV,
+	};
+
+	/*
+	 * This can happen when the given range [min_uV, max_uV] doesn't
+	 * contain any voltage that can be represented exactly in mV.
+	 */
+	if (min_mV > max_mV)
+		return -EINVAL;
+
+	return cros_ec_cmd(data->ec_dev, 0, EC_CMD_REGULATOR_SET_VOLTAGE, &cmd,
+			   sizeof(cmd), NULL, 0);
+}
+
+static const struct regulator_ops cros_ec_regulator_voltage_ops = {
+	.enable = cros_ec_regulator_enable,
+	.disable = cros_ec_regulator_disable,
+	.is_enabled = cros_ec_regulator_is_enabled,
+	.list_voltage = cros_ec_regulator_list_voltage,
+	.get_voltage = cros_ec_regulator_get_voltage,
+	.set_voltage = cros_ec_regulator_set_voltage,
+};
+
+static int cros_ec_regulator_init_info(struct device *dev,
+				       struct cros_ec_regulator_data *data)
+{
+	struct ec_params_regulator_get_info cmd = {
+		.index = data->index,
+	};
+	struct ec_response_regulator_get_info resp;
+	int ret;
+
+	ret = cros_ec_cmd(data->ec_dev, 0, EC_CMD_REGULATOR_GET_INFO, &cmd,
+			   sizeof(cmd), &resp, sizeof(resp));
+	if (ret < 0)
+		return ret;
+
+	data->num_voltages =
+		min_t(u16, ARRAY_SIZE(resp.voltages_mv), resp.num_voltages);
+	data->voltages_mV =
+		devm_kmemdup(dev, resp.voltages_mv,
+			     sizeof(u16) * data->num_voltages, GFP_KERNEL);
+	data->desc.n_voltages = data->num_voltages;
+
+	/* Make sure the returned name is always a valid string */
+	resp.name[ARRAY_SIZE(resp.name) - 1] = '\0';
+	data->desc.name = devm_kstrdup(dev, resp.name, GFP_KERNEL);
+	if (!data->desc.name)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static int cros_ec_regulator_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct cros_ec_regulator_data *drvdata;
+	struct regulator_init_data *init_data;
+	struct regulator_config cfg = {};
+	struct regulator_desc *desc;
+	int ret;
+
+	drvdata = devm_kzalloc(
+		&pdev->dev, sizeof(struct cros_ec_regulator_data), GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+
+	drvdata->ec_dev = dev_get_drvdata(dev->parent);
+	desc = &drvdata->desc;
+
+	init_data = of_get_regulator_init_data(dev, np, desc);
+	if (!init_data)
+		return -EINVAL;
+
+	ret = of_property_read_u32(np, "reg", &drvdata->index);
+	if (ret < 0)
+		return ret;
+
+	desc->owner = THIS_MODULE;
+	desc->type = REGULATOR_VOLTAGE;
+	desc->ops = &cros_ec_regulator_voltage_ops;
+
+	ret = cros_ec_regulator_init_info(dev, drvdata);
+	if (ret < 0)
+		return ret;
+
+	cfg.dev = &pdev->dev;
+	cfg.init_data = init_data;
+	cfg.driver_data = drvdata;
+	cfg.of_node = np;
+
+	drvdata->dev = devm_regulator_register(dev, &drvdata->desc, &cfg);
+	if (IS_ERR(drvdata->dev)) {
+		dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret);
+		return PTR_ERR(drvdata->dev);
+	}
+
+	platform_set_drvdata(pdev, drvdata);
+
+	return 0;
+}
+
+static const struct of_device_id regulator_cros_ec_of_match[] = {
+	{ .compatible = "google,cros-ec-regulator", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, regulator_cros_ec_of_match);
+
+static struct platform_driver cros_ec_regulator_driver = {
+	.probe		= cros_ec_regulator_probe,
+	.driver		= {
+		.name		= "cros-ec-regulator",
+		.of_match_table = regulator_cros_ec_of_match,
+	},
+};
+
+module_platform_driver(cros_ec_regulator_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("ChromeOS EC controlled regulator");
+MODULE_AUTHOR("Pi-Hsun Shih <pihsun@chromium.org>");

drivers/regulator/da9211-regulator.c

@@ -17,6 +17,7 @@
 #include <linux/gpio/consumer.h>
 #include <linux/regulator/of_regulator.h>
 #include <linux/regulator/da9211.h>
+#include <dt-bindings/regulator/dlg,da9211-regulator.h>
 #include "da9211-regulator.h"
 
 /* DEVICE IDs */
@@ -24,10 +25,6 @@
 #define DA9213_DEVICE_ID	0x23
 #define DA9215_DEVICE_ID	0x24
 
-#define DA9211_BUCK_MODE_SLEEP	1
-#define DA9211_BUCK_MODE_SYNC	2
-#define DA9211_BUCK_MODE_AUTO	3
-
 /* DA9211 REGULATOR IDs */
 #define DA9211_ID_BUCKA	0
 #define DA9211_ID_BUCKB	1
@@ -89,6 +86,20 @@ static const int da9215_current_limits[] = {
 	5600000, 5800000, 6000000, 6200000, 6400000, 6600000, 6800000, 7000000
 };
 
+static unsigned int da9211_map_buck_mode(unsigned int mode)
+{
+	switch (mode) {
+	case DA9211_BUCK_MODE_SLEEP:
+		return REGULATOR_MODE_STANDBY;
+	case DA9211_BUCK_MODE_SYNC:
+		return REGULATOR_MODE_FAST;
+	case DA9211_BUCK_MODE_AUTO:
+		return REGULATOR_MODE_NORMAL;
+	default:
+		return REGULATOR_MODE_INVALID;
+	}
+}
+
 static unsigned int da9211_buck_get_mode(struct regulator_dev *rdev)
 {
 	int id = rdev_get_id(rdev);
@@ -236,6 +247,7 @@ static const struct regulator_ops da9211_buck_ops = {
 	.vsel_reg = DA9211_REG_VBUCKA_A + DA9211_ID_##_id * 2,\
 	.vsel_mask = DA9211_VBUCK_MASK,\
 	.owner = THIS_MODULE,\
+	.of_map_mode = da9211_map_buck_mode,\
 }
 
 static struct regulator_desc da9211_regulators[] = {
@@ -245,8 +257,14 @@ static struct regulator_desc da9211_regulators[] = {
 
 #ifdef CONFIG_OF
 static struct of_regulator_match da9211_matches[] = {
-	[DA9211_ID_BUCKA] = { .name = "BUCKA" },
-	[DA9211_ID_BUCKB] = { .name = "BUCKB" },
+	[DA9211_ID_BUCKA] = {
+		.name = "BUCKA",
+		.desc = &da9211_regulators[DA9211_ID_BUCKA],
+	},
+	[DA9211_ID_BUCKB] = {
+		.name = "BUCKB",
+		.desc = &da9211_regulators[DA9211_ID_BUCKB],
+	},
 	};
 
 static struct da9211_pdata *da9211_parse_regulators_dt(

drivers/regulator/dbx500-prcmu.c

@@ -110,13 +110,6 @@ static int ux500_regulator_status_show(struct seq_file *s, void *p)
 }
 DEFINE_SHOW_ATTRIBUTE(ux500_regulator_status);
 
-int __attribute__((weak)) dbx500_regulator_testcase(
-	struct dbx500_regulator_info *regulator_info,
-	int num_regulators)
-{
-	return 0;
-}
-
 int
 ux500_regulator_debug_init(struct platform_device *pdev,
 	struct dbx500_regulator_info *regulator_info,
@@ -152,7 +145,6 @@ ux500_regulator_debug_init(struct platform_device *pdev,
 	if (!rdebug.state_after_suspend)
 		goto exit_free;
 
-	dbx500_regulator_testcase(regulator_info, num_regulators);
 	return 0;
 
 exit_free:

drivers/regulator/devres.c

@@ -41,8 +41,8 @@ static struct regulator *_devm_regulator_get(struct device *dev, const char *id,
 
 /**
  * devm_regulator_get - Resource managed regulator_get()
- * @dev: device for regulator "consumer"
- * @id: Supply name or regulator ID.
+ * @dev: device to supply
+ * @id:  supply name or regulator ID.
  *
  * Managed regulator_get(). Regulators returned from this function are
  * automatically regulator_put() on driver detach. See regulator_get() for more
@@ -56,8 +56,8 @@ EXPORT_SYMBOL_GPL(devm_regulator_get);
 
 /**
  * devm_regulator_get_exclusive - Resource managed regulator_get_exclusive()
- * @dev: device for regulator "consumer"
- * @id: Supply name or regulator ID.
+ * @dev: device to supply
+ * @id:  supply name or regulator ID.
  *
  * Managed regulator_get_exclusive(). Regulators returned from this function
  * are automatically regulator_put() on driver detach. See regulator_get() for
@@ -72,8 +72,8 @@ EXPORT_SYMBOL_GPL(devm_regulator_get_exclusive);
 
 /**
  * devm_regulator_get_optional - Resource managed regulator_get_optional()
- * @dev: device for regulator "consumer"
- * @id: Supply name or regulator ID.
+ * @dev: device to supply
+ * @id:  supply name or regulator ID.
  *
  * Managed regulator_get_optional(). Regulators returned from this
  * function are automatically regulator_put() on driver detach. See
@@ -130,9 +130,9 @@ static void devm_regulator_bulk_release(struct device *dev, void *res)
 /**
  * devm_regulator_bulk_get - managed get multiple regulator consumers
  *
- * @dev:           Device to supply
- * @num_consumers: Number of consumers to register
- * @consumers:     Configuration of consumers; clients are stored here.
+ * @dev:           device to supply
+ * @num_consumers: number of consumers to register
+ * @consumers:     configuration of consumers; clients are stored here.
  *
  * @return 0 on success, an errno on failure.
  *
@@ -173,6 +173,7 @@ static void devm_rdev_release(struct device *dev, void *res)
 
 /**
  * devm_regulator_register - Resource managed regulator_register()
+ * @dev:            device to supply
  * @regulator_desc: regulator to register
  * @config:         runtime configuration for regulator
  *
@@ -216,7 +217,8 @@ static int devm_rdev_match(struct device *dev, void *res, void *data)
 
 /**
  * devm_regulator_unregister - Resource managed regulator_unregister()
- * @regulator: regulator to free
+ * @dev:  device to supply
+ * @rdev: regulator to free
  *
  * Unregister a regulator registered with devm_regulator_register().
  * Normally this function will not need to be called and the resource
@@ -257,10 +259,10 @@ static void devm_regulator_destroy_supply_alias(struct device *dev, void *res)
  * devm_regulator_register_supply_alias - Resource managed
  * regulator_register_supply_alias()
  *
- * @dev: device that will be given as the regulator "consumer"
- * @id: Supply name or regulator ID
+ * @dev:       device to supply
+ * @id:        supply name or regulator ID
  * @alias_dev: device that should be used to lookup the supply
- * @alias_id: Supply name or regulator ID that should be used to lookup the
+ * @alias_id:  supply name or regulator ID that should be used to lookup the
  * supply
  *
  * The supply alias will automatically be unregistered when the source
@@ -298,8 +300,8 @@ EXPORT_SYMBOL_GPL(devm_regulator_register_supply_alias);
  * devm_regulator_unregister_supply_alias - Resource managed
  * regulator_unregister_supply_alias()
  *
- * @dev: device that will be given as the regulator "consumer"
- * @id: Supply name or regulator ID
+ * @dev: device to supply
+ * @id:  supply name or regulator ID
  *
  * Unregister an alias registered with
  * devm_regulator_register_supply_alias(). Normally this function
@@ -325,12 +327,12 @@ EXPORT_SYMBOL_GPL(devm_regulator_unregister_supply_alias);
  * devm_regulator_bulk_register_supply_alias - Managed register
  * multiple aliases
  *
- * @dev: device that will be given as the regulator "consumer"
- * @id: List of supply names or regulator IDs
+ * @dev:       device to supply
+ * @id:        list of supply names or regulator IDs
  * @alias_dev: device that should be used to lookup the supply
- * @alias_id: List of supply names or regulator IDs that should be used to
+ * @alias_id:  list of supply names or regulator IDs that should be used to
  *             lookup the supply
- * @num_id: Number of aliases to register
+ * @num_id:    number of aliases to register
  *
  * @return 0 on success, an errno on failure.
  *
@@ -375,9 +377,9 @@ EXPORT_SYMBOL_GPL(devm_regulator_bulk_register_supply_alias);
  * devm_regulator_bulk_unregister_supply_alias - Managed unregister
  * multiple aliases
  *
- * @dev: device that will be given as the regulator "consumer"
- * @id: List of supply names or regulator IDs
- * @num_id: Number of aliases to unregister
+ * @dev:    device to supply
+ * @id:     list of supply names or regulator IDs
+ * @num_id: number of aliases to unregister
  *
  * Unregister aliases registered with
  * devm_regulator_bulk_register_supply_alias(). Normally this function

drivers/regulator/fan53880.c

+// SPDX-License-Identifier: GPL-2.0+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+
+enum fan53880_regulator_ids {
+	FAN53880_LDO1,
+	FAN53880_LDO2,
+	FAN53880_LDO3,
+	FAN53880_LDO4,
+	FAN53880_BUCK,
+	FAN53880_BOOST,
+};
+
+enum fan53880_registers {
+	FAN53880_PRODUCT_ID = 0x00,
+	FAN53880_SILICON_REV,
+	FAN53880_BUCKVOUT,
+	FAN53880_BOOSTVOUT,
+	FAN53880_LDO1VOUT,
+	FAN53880_LDO2VOUT,
+	FAN53880_LDO3VOUT,
+	FAN53880_LDO4VOUT,
+	FAN53880_IOUT,
+	FAN53880_ENABLE,
+	FAN53880_ENABLE_BOOST,
+};
+
+#define FAN53880_ID	0x01
+
+static const struct regulator_ops fan53880_ops = {
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+#define FAN53880_LDO(_num, _supply, _default)				\
+	[FAN53880_LDO ## _num] = {					\
+		.name =		   "LDO"#_num,				\
+		.of_match =	   of_match_ptr("LDO"#_num),		\
+		.regulators_node = of_match_ptr("regulators"),		\
+		.type =		   REGULATOR_VOLTAGE,			\
+		.owner =	   THIS_MODULE,				\
+		.linear_ranges =   (struct linear_range[]) {		\
+		      REGULATOR_LINEAR_RANGE(_default, 0x0, 0x0, 0),	\
+		      REGULATOR_LINEAR_RANGE(800000, 0xf, 0x73, 25000),	\
+		},							\
+		.n_linear_ranges = 2,					\
+		.vsel_reg =	   FAN53880_LDO ## _num ## VOUT,	\
+		.vsel_mask =	   0x7f,				\
+		.enable_reg =	   FAN53880_ENABLE,			\
+		.enable_mask =	   BIT(_num - 1),			\
+		.enable_time =	   150,					\
+		.supply_name =	   _supply,				\
+		.ops =		   &fan53880_ops,			\
+	}
+
+static const struct regulator_desc fan53880_regulators[] = {
+	FAN53880_LDO(1, "VIN12", 2800000),
+	FAN53880_LDO(2, "VIN12", 2800000),
+	FAN53880_LDO(3, "VIN3", 1800000),
+	FAN53880_LDO(4, "VIN4", 1800000),
+	[FAN53880_BUCK] = {
+		.name =		   "BUCK",
+		.of_match =	   of_match_ptr("BUCK"),
+		.regulators_node = of_match_ptr("regulators"),
+		.type =		   REGULATOR_VOLTAGE,
+		.owner =	   THIS_MODULE,
+		.linear_ranges =   (struct linear_range[]) {
+		      REGULATOR_LINEAR_RANGE(1100000, 0x0, 0x0, 0),
+		      REGULATOR_LINEAR_RANGE(600000, 0x1f, 0xf7, 12500),
+		},
+		.n_linear_ranges = 2,
+		.vsel_reg =	   FAN53880_BUCKVOUT,
+		.vsel_mask =	   0x7f,
+		.enable_reg =	   FAN53880_ENABLE,
+		.enable_mask =	   0x10,
+		.enable_time =	   480,
+		.supply_name =	   "PVIN",
+		.ops =		   &fan53880_ops,
+	},
+	[FAN53880_BOOST] = {
+		.name =		   "BOOST",
+		.of_match =	   of_match_ptr("BOOST"),
+		.regulators_node = of_match_ptr("regulators"),
+		.type =		   REGULATOR_VOLTAGE,
+		.owner =	   THIS_MODULE,
+		.linear_ranges =   (struct linear_range[]) {
+		      REGULATOR_LINEAR_RANGE(5000000, 0x0, 0x0, 0),
+		      REGULATOR_LINEAR_RANGE(3000000, 0x4, 0x70, 25000),
+		},
+		.n_linear_ranges = 2,
+		.vsel_reg =	   FAN53880_BOOSTVOUT,
+		.vsel_mask =	   0x7f,
+		.enable_reg =	   FAN53880_ENABLE_BOOST,
+		.enable_mask =	   0xff,
+		.enable_time =	   580,
+		.supply_name =	   "PVIN",
+		.ops =		   &fan53880_ops,
+	},
+};
+
+static const struct regmap_config fan53880_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = FAN53880_ENABLE_BOOST,
+};
+
+static int fan53880_i2c_probe(struct i2c_client *i2c,
+			     const struct i2c_device_id *id)
+{
+	struct regulator_config config = { };
+	struct regulator_dev *rdev;
+	struct regmap *regmap;
+	int i, ret;
+	unsigned int data;
+
+	regmap = devm_regmap_init_i2c(i2c, &fan53880_regmap);
+	if (IS_ERR(regmap)) {
+		ret = PTR_ERR(regmap);
+		dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_read(regmap, FAN53880_PRODUCT_ID, &data);
+	if (ret < 0) {
+		dev_err(&i2c->dev, "Failed to read PRODUCT_ID: %d\n", ret);
+		return ret;
+	}
+	if (data != FAN53880_ID) {
+		dev_err(&i2c->dev, "Unsupported device id: 0x%x.\n", data);
+		return -ENODEV;
+	}
+
+	config.dev = &i2c->dev;
+	config.init_data = NULL;
+
+	for (i = 0; i < ARRAY_SIZE(fan53880_regulators); i++) {
+		rdev = devm_regulator_register(&i2c->dev,
+					       &fan53880_regulators[i],
+					       &config);
+		if (IS_ERR(rdev)) {
+			ret = PTR_ERR(rdev);
+			dev_err(&i2c->dev, "Failed to register %s: %d\n",
+				fan53880_regulators[i].name, ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id fan53880_dt_ids[] = {
+	{ .compatible = "onnn,fan53880", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, fan53880_dt_ids);
+#endif
+
+static const struct i2c_device_id fan53880_i2c_id[] = {
+	{ "fan53880", },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, fan53880_i2c_id);
+
+static struct i2c_driver fan53880_regulator_driver = {
+	.driver = {
+		.name = "fan53880",
+		.of_match_table	= of_match_ptr(fan53880_dt_ids),
+	},
+	.probe = fan53880_i2c_probe,
+	.id_table = fan53880_i2c_id,
+};
+module_i2c_driver(fan53880_regulator_driver);
+
+MODULE_DESCRIPTION("FAN53880 PMIC voltage regulator driver");
+MODULE_AUTHOR("Christoph Fritz <chf.fritz@googlemail.com>");
+MODULE_LICENSE("GPL");

drivers/regulator/fixed.c

@@ -210,7 +210,7 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev)
 
 	/*
 	 * The signal will be inverted by the GPIO core if flagged so in the
-	 * decriptor.
+	 * descriptor.
 	 */
 	if (config->enabled_at_boot)
 		gflags = GPIOD_OUT_HIGH;

drivers/regulator/gpio-regulator.c

@@ -148,6 +148,13 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np,
 
 	config->supply_name = config->init_data->constraints.name;
 
+	if (config->init_data->constraints.boot_on)
+		config->enabled_at_boot = true;
+
+	/*
+	 * Do not use: undocumented device tree property.
+	 * This is kept around solely for device tree ABI stability.
+	 */
 	if (of_property_read_bool(np, "enable-at-boot"))
 		config->enabled_at_boot = true;
 
@@ -311,7 +318,7 @@ static int gpio_regulator_probe(struct platform_device *pdev)
 
 	/*
 	 * The signal will be inverted by the GPIO core if flagged so in the
-	 * decriptor.
+	 * descriptor.
 	 */
 	if (config->enabled_at_boot)
 		gflags = GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE;

drivers/regulator/hi6421-regulator.c

@@ -5,7 +5,7 @@
 // Copyright (c) <2011-2014> HiSilicon Technologies Co., Ltd.
 //              http://www.hisilicon.com
 // Copyright (c) <2013-2014> Linaro Ltd.
-//              http://www.linaro.org
+//              https://www.linaro.org
 //
 // Author: Guodong Xu <guodong.xu@linaro.org>
 

drivers/regulator/hi6421v530-regulator.c

@@ -5,7 +5,7 @@
 // Copyright (c) <2017> HiSilicon Technologies Co., Ltd.
 //              http://www.hisilicon.com
 // Copyright (c) <2017> Linaro Ltd.
-//              http://www.linaro.org
+//              https://www.linaro.org
 //
 // Author: Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com>
 //         Guodong Xu <guodong.xu@linaro.org>

drivers/regulator/lp873x-regulator.c

 /*
  * Regulator driver for LP873X PMIC
  *
- * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License version 2 as

drivers/regulator/lp87565-regulator.c

@@ -2,7 +2,7 @@
 /*
  * Regulator driver for LP87565 PMIC
  *
- * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <linux/module.h>
@@ -11,8 +11,8 @@
 
 #include <linux/mfd/lp87565.h>
 
-#define LP87565_REGULATOR(_name, _id, _of, _ops, _n, _vr, _vm, _er, _em, \
-			 _delay, _lr, _cr)				\
+#define LP87565_REGULATOR(_name, _id, _of, _ops, _n, _vr, _vm,		\
+			  _er, _em, _ev, _delay, _lr, _cr)		\
 	[_id] = {							\
 		.desc = {						\
 			.name			= _name,		\
@@ -28,6 +28,7 @@
 			.vsel_mask		= _vm,			\
 			.enable_reg		= _er,			\
 			.enable_mask		= _em,			\
+			.enable_val		= _ev,			\
 			.ramp_delay		= _delay,		\
 			.linear_ranges		= _lr,			\
 			.n_linear_ranges	= ARRAY_SIZE(_lr),	\
@@ -121,38 +122,54 @@ static const struct lp87565_regulator regulators[] = {
 	LP87565_REGULATOR("BUCK0", LP87565_BUCK_0, "buck0", lp87565_buck_ops,
 			  256, LP87565_REG_BUCK0_VOUT, LP87565_BUCK_VSET,
 			  LP87565_REG_BUCK0_CTRL_1,
+			  LP87565_BUCK_CTRL_1_EN |
+			  LP87565_BUCK_CTRL_1_EN_PIN_CTRL,
 			  LP87565_BUCK_CTRL_1_EN, 3230,
 			  buck0_1_2_3_ranges, LP87565_REG_BUCK0_CTRL_2),
 	LP87565_REGULATOR("BUCK1", LP87565_BUCK_1, "buck1", lp87565_buck_ops,
 			  256, LP87565_REG_BUCK1_VOUT, LP87565_BUCK_VSET,
 			  LP87565_REG_BUCK1_CTRL_1,
+			  LP87565_BUCK_CTRL_1_EN |
+			  LP87565_BUCK_CTRL_1_EN_PIN_CTRL,
 			  LP87565_BUCK_CTRL_1_EN, 3230,
 			  buck0_1_2_3_ranges, LP87565_REG_BUCK1_CTRL_2),
 	LP87565_REGULATOR("BUCK2", LP87565_BUCK_2, "buck2", lp87565_buck_ops,
 			  256, LP87565_REG_BUCK2_VOUT, LP87565_BUCK_VSET,
 			  LP87565_REG_BUCK2_CTRL_1,
+			  LP87565_BUCK_CTRL_1_EN |
+			  LP87565_BUCK_CTRL_1_EN_PIN_CTRL,
 			  LP87565_BUCK_CTRL_1_EN, 3230,
 			  buck0_1_2_3_ranges, LP87565_REG_BUCK2_CTRL_2),
 	LP87565_REGULATOR("BUCK3", LP87565_BUCK_3, "buck3", lp87565_buck_ops,
 			  256, LP87565_REG_BUCK3_VOUT, LP87565_BUCK_VSET,
 			  LP87565_REG_BUCK3_CTRL_1,
+			  LP87565_BUCK_CTRL_1_EN |
+			  LP87565_BUCK_CTRL_1_EN_PIN_CTRL,
 			  LP87565_BUCK_CTRL_1_EN, 3230,
 			  buck0_1_2_3_ranges, LP87565_REG_BUCK3_CTRL_2),
 	LP87565_REGULATOR("BUCK10", LP87565_BUCK_10, "buck10", lp87565_buck_ops,
 			  256, LP87565_REG_BUCK0_VOUT, LP87565_BUCK_VSET,
 			  LP87565_REG_BUCK0_CTRL_1,
 			  LP87565_BUCK_CTRL_1_EN |
+			  LP87565_BUCK_CTRL_1_EN_PIN_CTRL |
+			  LP87565_BUCK_CTRL_1_FPWM_MP_0_2,
+			  LP87565_BUCK_CTRL_1_EN |
 			  LP87565_BUCK_CTRL_1_FPWM_MP_0_2, 3230,
 			  buck0_1_2_3_ranges, LP87565_REG_BUCK0_CTRL_2),
 	LP87565_REGULATOR("BUCK23", LP87565_BUCK_23, "buck23", lp87565_buck_ops,
 			  256, LP87565_REG_BUCK2_VOUT, LP87565_BUCK_VSET,
 			  LP87565_REG_BUCK2_CTRL_1,
+			  LP87565_BUCK_CTRL_1_EN |
+			  LP87565_BUCK_CTRL_1_EN_PIN_CTRL,
 			  LP87565_BUCK_CTRL_1_EN, 3230,
 			  buck0_1_2_3_ranges, LP87565_REG_BUCK2_CTRL_2),
 	LP87565_REGULATOR("BUCK3210", LP87565_BUCK_3210, "buck3210",
 			  lp87565_buck_ops, 256, LP87565_REG_BUCK0_VOUT,
 			  LP87565_BUCK_VSET, LP87565_REG_BUCK0_CTRL_1,
 			  LP87565_BUCK_CTRL_1_EN |
+			  LP87565_BUCK_CTRL_1_EN_PIN_CTRL |
+			  LP87565_BUCK_CTRL_1_FPWM_MP_0_2,
+			  LP87565_BUCK_CTRL_1_EN |
 			  LP87565_BUCK_CTRL_1_FPWM_MP_0_2, 3230,
 			  buck0_1_2_3_ranges, LP87565_REG_BUCK0_CTRL_2),
 };

drivers/regulator/ltc3676.c

@@ -221,7 +221,7 @@ static const struct regulator_ops ltc3676_fixed_regulator_ops = {
 #define LTC3676_FIXED_REG(_id, _name, _en_reg, _en_bit)                \
 	LTC3676_REG(_id, _name, fixed, LTC3676_ ## _en_reg, _en_bit, 0, 0)
 
-static struct regulator_desc ltc3676_regulators[LTC3676_NUM_REGULATORS] = {
+static const struct regulator_desc ltc3676_regulators[LTC3676_NUM_REGULATORS] = {
 	LTC3676_LINEAR_REG(SW1, sw1, BUCK1, DVB1A),
 	LTC3676_LINEAR_REG(SW2, sw2, BUCK2, DVB2A),
 	LTC3676_LINEAR_REG(SW3, sw3, BUCK3, DVB3A),

drivers/regulator/max14577-regulator.c

@@ -155,7 +155,7 @@ static const struct regulator_desc max77836_supported_regulators[] = {
 	[MAX77836_LDO2] = MAX77836_LDO_REG(2),
 };
 
-/**
+/*
  * Registers for regulators of max77836 use different I2C slave addresses so
  * different regmaps must be used for them.
  *

drivers/regulator/max8907-regulator.c

@@ -109,7 +109,7 @@ struct max8907_regulator {
 static const struct regulator_ops max8907_mbatt_ops = {
 };
 
-static struct regulator_ops max8907_ldo_ops = {
+static const struct regulator_ops max8907_ldo_ops = {
 	.list_voltage = regulator_list_voltage_linear,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -128,7 +128,7 @@ static const struct regulator_ops max8907_fixed_ops = {
 	.list_voltage = regulator_list_voltage_linear,
 };
 
-static struct regulator_ops max8907_out5v_ops = {
+static const struct regulator_ops max8907_out5v_ops = {
 	.list_voltage = regulator_list_voltage_linear,
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
@@ -145,7 +145,7 @@ static const struct regulator_ops max8907_bbat_ops = {
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 };
 
-static struct regulator_desc max8907_regulators[] = {
+static const struct regulator_desc max8907_regulators[] = {
 	REG_MBATT(),
 	REG_LDO(SD1, "in-v1", MAX8907_REG_SDCTL1, 650000, 2225000, 25000),
 	REG_LDO(SD2, "in-v2", MAX8907_REG_SDCTL2, 637500, 1425000, 12500),

drivers/regulator/max8997-regulator.c

@@ -732,7 +732,7 @@ static int max8997_reg_disable_suspend(struct regulator_dev *rdev)
 	return max8997_update_reg(i2c, reg, ~pattern, mask);
 }
 
-static struct regulator_ops max8997_ldo_ops = {
+static const struct regulator_ops max8997_ldo_ops = {
 	.list_voltage		= max8997_list_voltage,
 	.is_enabled		= max8997_reg_is_enabled,
 	.enable			= max8997_reg_enable,
@@ -742,7 +742,7 @@ static struct regulator_ops max8997_ldo_ops = {
 	.set_suspend_disable	= max8997_reg_disable_suspend,
 };
 
-static struct regulator_ops max8997_buck_ops = {
+static const struct regulator_ops max8997_buck_ops = {
 	.list_voltage		= max8997_list_voltage,
 	.is_enabled		= max8997_reg_is_enabled,
 	.enable			= max8997_reg_enable,
@@ -753,7 +753,7 @@ static struct regulator_ops max8997_buck_ops = {
 	.set_suspend_disable	= max8997_reg_disable_suspend,
 };
 
-static struct regulator_ops max8997_fixedvolt_ops = {
+static const struct regulator_ops max8997_fixedvolt_ops = {
 	.list_voltage		= max8997_list_voltage,
 	.is_enabled		= max8997_reg_is_enabled,
 	.enable			= max8997_reg_enable,
@@ -761,7 +761,7 @@ static struct regulator_ops max8997_fixedvolt_ops = {
 	.set_suspend_disable	= max8997_reg_disable_suspend,
 };
 
-static struct regulator_ops max8997_safeout_ops = {
+static const struct regulator_ops max8997_safeout_ops = {
 	.list_voltage		= regulator_list_voltage_table,
 	.is_enabled		= max8997_reg_is_enabled,
 	.enable			= max8997_reg_enable,
@@ -771,7 +771,7 @@ static struct regulator_ops max8997_safeout_ops = {
 	.set_suspend_disable	= max8997_reg_disable_suspend,
 };
 
-static struct regulator_ops max8997_fixedstate_ops = {
+static const struct regulator_ops max8997_fixedstate_ops = {
 	.list_voltage		= max8997_list_voltage_charger_cv,
 	.get_voltage_sel	= max8997_get_voltage_sel,
 	.set_voltage		= max8997_set_voltage_charger_cv,
@@ -805,7 +805,7 @@ static int max8997_get_current_limit(struct regulator_dev *rdev)
 	return max8997_list_voltage(rdev, sel);
 }
 
-static struct regulator_ops max8997_charger_ops = {
+static const struct regulator_ops max8997_charger_ops = {
 	.is_enabled		= max8997_reg_is_enabled,
 	.enable			= max8997_reg_enable,
 	.disable		= max8997_reg_disable,
@@ -813,7 +813,7 @@ static struct regulator_ops max8997_charger_ops = {
 	.set_current_limit	= max8997_set_current_limit,
 };
 
-static struct regulator_ops max8997_charger_fixedstate_ops = {
+static const struct regulator_ops max8997_charger_fixedstate_ops = {
 	.get_current_limit	= max8997_get_current_limit,
 	.set_current_limit	= max8997_set_current_limit,
 };

drivers/regulator/max8998.c

@@ -415,7 +415,7 @@ static int max8998_set_current_limit(struct regulator_dev *rdev,
 				  sel, rdev->desc->csel_mask);
 }
 
-int max8998_get_current_limit(struct regulator_dev *rdev)
+static int max8998_get_current_limit(struct regulator_dev *rdev)
 {
 	struct max8998_data *max8998 = rdev_get_drvdata(rdev);
 	struct i2c_client *i2c = max8998->iodev->i2c;

drivers/regulator/mp886x.c

@@ -206,8 +206,7 @@ static const struct regmap_config mp886x_regmap_config = {
 	.val_bits = 8,
 };
 
-static int mp886x_i2c_probe(struct i2c_client *client,
-			    const struct i2c_device_id *id)
+static int mp886x_i2c_probe(struct i2c_client *client)
 {
 	struct device *dev = &client->dev;
 	struct device_node *np = dev->of_node;
@@ -280,7 +279,7 @@ static struct i2c_driver mp886x_regulator_driver = {
 		.name = "mp886x-regulator",
 		.of_match_table = of_match_ptr(mp886x_dt_ids),
 	},
-	.probe = mp886x_i2c_probe,
+	.probe_new = mp886x_i2c_probe,
 	.id_table = mp886x_id,
 };
 module_i2c_driver(mp886x_regulator_driver);

drivers/regulator/mt6397-regulator.c

@@ -13,9 +13,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/mt6397-regulator.h>
 #include <linux/regulator/of_regulator.h>
-
-#define MT6397_BUCK_MODE_AUTO	0
-#define MT6397_BUCK_MODE_FORCE_PWM	1
+#include <dt-bindings/regulator/mediatek,mt6397-regulator.h>
 
 /*
  * MT6397 regulators' information
@@ -55,6 +53,7 @@ struct mt6397_regulator_info {
 		.vsel_mask = vosel_mask,				\
 		.enable_reg = enreg,					\
 		.enable_mask = BIT(0),					\
+		.of_map_mode = mt6397_map_mode,				\
 	},								\
 	.qi = BIT(13),							\
 	.vselon_reg = voselon,						\
@@ -146,6 +145,18 @@ static const unsigned int ldo_volt_table7[] = {
 	1300000, 1500000, 1800000, 2000000, 2500000, 2800000, 3000000, 3300000,
 };
 
+static unsigned int mt6397_map_mode(unsigned int mode)
+{
+	switch (mode) {
+	case MT6397_BUCK_MODE_AUTO:
+		return REGULATOR_MODE_NORMAL;
+	case MT6397_BUCK_MODE_FORCE_PWM:
+		return REGULATOR_MODE_FAST;
+	default:
+		return REGULATOR_MODE_INVALID;
+	}
+}
+
 static int mt6397_regulator_set_mode(struct regulator_dev *rdev,
 				     unsigned int mode)
 {

drivers/regulator/of_regulator.c

@@ -532,7 +532,7 @@ static bool of_coupling_find_node(struct device_node *src,
 /**
  * of_check_coupling_data - Parse rdev's coupling properties and check data
  *			    consistency
- * @rdev - pointer to regulator_dev whose data is checked
+ * @rdev: pointer to regulator_dev whose data is checked
  *
  * Function checks if all the following conditions are met:
  * - rdev's max_spread is greater than 0

drivers/regulator/pbias-regulator.c

 /*
  * pbias-regulator.c
  *
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
  * Author: Balaji T K <balajitk@ti.com>
  *
  * This program is free software; you can redistribute it and/or

drivers/regulator/pfuze100-regulator.c

@@ -128,7 +128,7 @@ static int pfuze100_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
 	struct pfuze_chip *pfuze100 = rdev_get_drvdata(rdev);
 	int id = rdev_get_id(rdev);
 	bool reg_has_ramp_delay;
-	unsigned int ramp_bits;
+	unsigned int ramp_bits = 0;
 	int ret;
 
 	switch (pfuze100->chip_id) {
@@ -149,8 +149,11 @@ static int pfuze100_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
 	}
 
 	if (reg_has_ramp_delay) {
+		if (ramp_delay > 0) {
 			ramp_delay = 12500 / ramp_delay;
 			ramp_bits = (ramp_delay >> 1) - (ramp_delay >> 3);
+		}
+
 		ret = regmap_update_bits(pfuze100->regmap,
 					 rdev->desc->vsel_reg + 4,
 					 0xc0, ramp_bits << 6);

drivers/regulator/pwm-regulator.c

@@ -48,7 +48,7 @@ struct pwm_voltages {
 	unsigned int dutycycle;
 };
 
-/**
+/*
  * Voltage table call-backs
  */
 static void pwm_regulator_init_state(struct regulator_dev *rdev)

drivers/regulator/qcom-labibb-regulator.c

+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2020, The Linux Foundation. All rights reserved.
+
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+#define REG_PERPH_TYPE                  0x04
+
+#define QCOM_LAB_TYPE			0x24
+#define QCOM_IBB_TYPE			0x20
+
+#define PMI8998_LAB_REG_BASE		0xde00
+#define PMI8998_IBB_REG_BASE		0xdc00
+
+#define REG_LABIBB_STATUS1		0x08
+#define REG_LABIBB_ENABLE_CTL		0x46
+#define LABIBB_STATUS1_VREG_OK_BIT	BIT(7)
+#define LABIBB_CONTROL_ENABLE		BIT(7)
+
+#define LAB_ENABLE_CTL_MASK		BIT(7)
+#define IBB_ENABLE_CTL_MASK		(BIT(7) | BIT(6))
+
+#define LABIBB_OFF_ON_DELAY		1000
+#define LAB_ENABLE_TIME			(LABIBB_OFF_ON_DELAY * 2)
+#define IBB_ENABLE_TIME			(LABIBB_OFF_ON_DELAY * 10)
+#define LABIBB_POLL_ENABLED_TIME	1000
+
+struct labibb_regulator {
+	struct regulator_desc		desc;
+	struct device			*dev;
+	struct regmap			*regmap;
+	struct regulator_dev		*rdev;
+	u16				base;
+	u8				type;
+};
+
+struct labibb_regulator_data {
+	const char			*name;
+	u8				type;
+	u16				base;
+	struct regulator_desc		*desc;
+};
+
+static struct regulator_ops qcom_labibb_ops = {
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+};
+
+static struct regulator_desc pmi8998_lab_desc = {
+	.enable_mask		= LAB_ENABLE_CTL_MASK,
+	.enable_reg		= (PMI8998_LAB_REG_BASE + REG_LABIBB_ENABLE_CTL),
+	.enable_val		= LABIBB_CONTROL_ENABLE,
+	.enable_time		= LAB_ENABLE_TIME,
+	.poll_enabled_time	= LABIBB_POLL_ENABLED_TIME,
+	.off_on_delay		= LABIBB_OFF_ON_DELAY,
+	.owner			= THIS_MODULE,
+	.type			= REGULATOR_VOLTAGE,
+	.ops			= &qcom_labibb_ops,
+};
+
+static struct regulator_desc pmi8998_ibb_desc = {
+	.enable_mask		= IBB_ENABLE_CTL_MASK,
+	.enable_reg		= (PMI8998_IBB_REG_BASE + REG_LABIBB_ENABLE_CTL),
+	.enable_val		= LABIBB_CONTROL_ENABLE,
+	.enable_time		= IBB_ENABLE_TIME,
+	.poll_enabled_time	= LABIBB_POLL_ENABLED_TIME,
+	.off_on_delay		= LABIBB_OFF_ON_DELAY,
+	.owner			= THIS_MODULE,
+	.type			= REGULATOR_VOLTAGE,
+	.ops			= &qcom_labibb_ops,
+};
+
+static const struct labibb_regulator_data pmi8998_labibb_data[] = {
+	{"lab", QCOM_LAB_TYPE, PMI8998_LAB_REG_BASE, &pmi8998_lab_desc},
+	{"ibb", QCOM_IBB_TYPE, PMI8998_IBB_REG_BASE, &pmi8998_ibb_desc},
+	{ },
+};
+
+static const struct of_device_id qcom_labibb_match[] = {
+	{ .compatible = "qcom,pmi8998-lab-ibb", .data = &pmi8998_labibb_data},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, qcom_labibb_match);
+
+static int qcom_labibb_regulator_probe(struct platform_device *pdev)
+{
+	struct labibb_regulator *vreg;
+	struct device *dev = &pdev->dev;
+	struct regulator_config cfg = {};
+
+	const struct of_device_id *match;
+	const struct labibb_regulator_data *reg_data;
+	struct regmap *reg_regmap;
+	unsigned int type;
+	int ret;
+
+	reg_regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!reg_regmap) {
+		dev_err(&pdev->dev, "Couldn't get parent's regmap\n");
+		return -ENODEV;
+	}
+
+	match = of_match_device(qcom_labibb_match, &pdev->dev);
+	if (!match)
+		return -ENODEV;
+
+	for (reg_data = match->data; reg_data->name; reg_data++) {
+
+		/* Validate if the type of regulator is indeed
+		 * what's mentioned in DT.
+		 */
+		ret = regmap_read(reg_regmap, reg_data->base + REG_PERPH_TYPE,
+				  &type);
+		if (ret < 0) {
+			dev_err(dev,
+				"Peripheral type read failed ret=%d\n",
+				ret);
+			return -EINVAL;
+		}
+
+		if (WARN_ON((type != QCOM_LAB_TYPE) && (type != QCOM_IBB_TYPE)) ||
+		    WARN_ON(type != reg_data->type))
+			return -EINVAL;
+
+		vreg  = devm_kzalloc(&pdev->dev, sizeof(*vreg),
+					   GFP_KERNEL);
+		if (!vreg)
+			return -ENOMEM;
+
+		vreg->regmap = reg_regmap;
+		vreg->dev = dev;
+		vreg->base = reg_data->base;
+		vreg->type = reg_data->type;
+
+		memcpy(&vreg->desc, reg_data->desc, sizeof(vreg->desc));
+		vreg->desc.of_match = reg_data->name;
+		vreg->desc.name = reg_data->name;
+
+		cfg.dev = vreg->dev;
+		cfg.driver_data = vreg;
+		cfg.regmap = vreg->regmap;
+
+		vreg->rdev = devm_regulator_register(vreg->dev, &vreg->desc,
+							&cfg);
+
+		if (IS_ERR(vreg->rdev)) {
+			dev_err(dev, "qcom_labibb: error registering %s : %d\n",
+					reg_data->name, ret);
+			return PTR_ERR(vreg->rdev);
+		}
+	}
+
+	return 0;
+}
+
+static struct platform_driver qcom_labibb_regulator_driver = {
+	.driver	= {
+		.name = "qcom-lab-ibb-regulator",
+		.of_match_table	= qcom_labibb_match,
+	},
+	.probe = qcom_labibb_regulator_probe,
+};
+module_platform_driver(qcom_labibb_regulator_driver);
+
+MODULE_DESCRIPTION("Qualcomm labibb driver");
+MODULE_AUTHOR("Nisha Kumari <nishakumari@codeaurora.org>");
+MODULE_AUTHOR("Sumit Semwal <sumit.semwal@linaro.org>");
+MODULE_LICENSE("GPL v2");

drivers/regulator/qcom-rpmh-regulator.c

@@ -22,9 +22,9 @@
 
 /**
  * enum rpmh_regulator_type - supported RPMh accelerator types
- * %VRM:	RPMh VRM accelerator which supports voting on enable, voltage,
+ * @VRM:	RPMh VRM accelerator which supports voting on enable, voltage,
  *		and mode of LDO, SMPS, and BOB type PMIC regulators.
- * %XOB:	RPMh XOB accelerator which supports voting on the enable state
+ * @XOB:	RPMh XOB accelerator which supports voting on the enable state
  *		of PMIC regulators.
  */
 enum rpmh_regulator_type {
@@ -399,13 +399,13 @@ static const struct regulator_ops rpmh_regulator_xob_ops = {
 
 /**
  * rpmh_regulator_init_vreg() - initialize all attributes of an rpmh-regulator
- * vreg:		Pointer to the individual rpmh-regulator resource
- * dev:			Pointer to the top level rpmh-regulator PMIC device
- * node:		Pointer to the individual rpmh-regulator resource
+ * @vreg:		Pointer to the individual rpmh-regulator resource
+ * @dev:			Pointer to the top level rpmh-regulator PMIC device
+ * @node:		Pointer to the individual rpmh-regulator resource
  *			device node
- * pmic_id:		String used to identify the top level rpmh-regulator
+ * @pmic_id:		String used to identify the top level rpmh-regulator
  *			PMIC device on the board
- * pmic_rpmh_data:	Pointer to a null-terminated array of rpmh-regulator
+ * @pmic_rpmh_data:	Pointer to a null-terminated array of rpmh-regulator
  *			resources defined for the top level PMIC device
  *
  * Return: 0 on success, errno on failure

drivers/regulator/qcom_rpm-regulator.c

@@ -407,7 +407,7 @@ static int rpm_reg_set_load(struct regulator_dev *rdev, int load_uA)
 	return ret;
 }
 
-static struct regulator_ops uV_ops = {
+static const struct regulator_ops uV_ops = {
 	.list_voltage = regulator_list_voltage_linear_range,
 
 	.set_voltage_sel = rpm_reg_set_uV_sel,
@@ -420,7 +420,7 @@ static struct regulator_ops uV_ops = {
 	.set_load = rpm_reg_set_load,
 };
 
-static struct regulator_ops mV_ops = {
+static const struct regulator_ops mV_ops = {
 	.list_voltage = regulator_list_voltage_linear_range,
 
 	.set_voltage_sel = rpm_reg_set_mV_sel,
@@ -433,7 +433,7 @@ static struct regulator_ops mV_ops = {
 	.set_load = rpm_reg_set_load,
 };
 
-static struct regulator_ops switch_ops = {
+static const struct regulator_ops switch_ops = {
 	.enable = rpm_reg_switch_enable,
 	.disable = rpm_reg_switch_disable,
 	.is_enabled = rpm_reg_is_enabled,

drivers/regulator/qcom_smd-regulator.c

@@ -198,6 +198,15 @@ static const struct regulator_ops rpm_bob_ops = {
 	.set_voltage = rpm_reg_set_voltage,
 };
 
+static const struct regulator_ops rpm_mp5496_ops = {
+	.enable = rpm_reg_enable,
+	.disable = rpm_reg_disable,
+	.is_enabled = rpm_reg_is_enabled,
+	.list_voltage = regulator_list_voltage_linear_range,
+
+	.set_voltage = rpm_reg_set_voltage,
+};
+
 static const struct regulator_desc pma8084_hfsmps = {
 	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(375000,  0,  95, 12500),
@@ -474,15 +483,6 @@ static const struct regulator_desc pmi8994_bby = {
 	.ops = &rpm_bob_ops,
 };
 
-static const struct regulator_desc pmi8994_boost = {
-	.linear_ranges = (struct linear_range[]) {
-		REGULATOR_LINEAR_RANGE(4000000, 0, 30, 50000),
-	},
-	.n_linear_ranges = 1,
-	.n_voltages = 31,
-	.ops = &rpm_smps_ldo_ops,
-};
-
 static const struct regulator_desc pm8998_ftsmps = {
 	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(320000, 0, 258, 4000),
@@ -595,6 +595,24 @@ static const struct regulator_desc pms405_pldo600 = {
 	.ops = &rpm_smps_ldo_ops,
 };
 
+static const struct regulator_desc mp5496_smpa2 = {
+	.linear_ranges = (struct linear_range[]) {
+		REGULATOR_LINEAR_RANGE(725000, 0, 27, 12500),
+	},
+	.n_linear_ranges = 1,
+	.n_voltages = 28,
+	.ops = &rpm_mp5496_ops,
+};
+
+static const struct regulator_desc mp5496_ldoa2 = {
+	.linear_ranges = (struct linear_range[]) {
+		REGULATOR_LINEAR_RANGE(1800000, 0, 60, 25000),
+	},
+	.n_linear_ranges = 1,
+	.n_voltages = 61,
+	.ops = &rpm_mp5496_ops,
+};
+
 struct rpm_regulator_data {
 	const char *name;
 	u32 type;
@@ -603,6 +621,12 @@ struct rpm_regulator_data {
 	const char *supply;
 };
 
+static const struct rpm_regulator_data rpm_mp5496_regulators[] = {
+	{ "s2", QCOM_SMD_RPM_SMPA, 2, &mp5496_smpa2, "s2" },
+	{ "l2", QCOM_SMD_RPM_LDOA, 2, &mp5496_ldoa2, "l2" },
+	{}
+};
+
 static const struct rpm_regulator_data rpm_pm8841_regulators[] = {
 	{ "s1", QCOM_SMD_RPM_SMPB, 1, &pm8x41_hfsmps, "vdd_s1" },
 	{ "s2", QCOM_SMD_RPM_SMPB, 2, &pm8841_ftsmps, "vdd_s2" },
@@ -901,6 +925,7 @@ static const struct rpm_regulator_data rpm_pms405_regulators[] = {
 };
 
 static const struct of_device_id rpm_of_match[] = {
+	{ .compatible = "qcom,rpm-mp5496-regulators", .data = &rpm_mp5496_regulators },
 	{ .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators },
 	{ .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators },
 	{ .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators },

drivers/regulator/qcom_spmi-regulator.c

@@ -380,7 +380,7 @@ struct spmi_regulator_mapping {
 	enum spmi_regulator_logical_type	logical_type;
 	u32					revision_min;
 	u32					revision_max;
-	struct regulator_ops			*ops;
+	const struct regulator_ops		*ops;
 	struct spmi_voltage_set_points		*set_points;
 	int					hpm_min_load;
 };
@@ -1261,7 +1261,7 @@ spmi_regulator_saw_set_voltage(struct regulator_dev *rdev, unsigned selector)
 
 static struct regulator_ops spmi_saw_ops = {};
 
-static struct regulator_ops spmi_smps_ops = {
+static const struct regulator_ops spmi_smps_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -1276,7 +1276,7 @@ static struct regulator_ops spmi_smps_ops = {
 	.set_pull_down		= spmi_regulator_common_set_pull_down,
 };
 
-static struct regulator_ops spmi_ldo_ops = {
+static const struct regulator_ops spmi_ldo_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -1293,7 +1293,7 @@ static struct regulator_ops spmi_ldo_ops = {
 	.set_soft_start		= spmi_regulator_common_set_soft_start,
 };
 
-static struct regulator_ops spmi_ln_ldo_ops = {
+static const struct regulator_ops spmi_ln_ldo_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -1305,7 +1305,7 @@ static struct regulator_ops spmi_ln_ldo_ops = {
 	.get_bypass		= spmi_regulator_common_get_bypass,
 };
 
-static struct regulator_ops spmi_vs_ops = {
+static const struct regulator_ops spmi_vs_ops = {
 	.enable			= spmi_regulator_vs_enable,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -1316,7 +1316,7 @@ static struct regulator_ops spmi_vs_ops = {
 	.get_mode		= spmi_regulator_common_get_mode,
 };
 
-static struct regulator_ops spmi_boost_ops = {
+static const struct regulator_ops spmi_boost_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -1327,7 +1327,7 @@ static struct regulator_ops spmi_boost_ops = {
 	.set_input_current_limit = spmi_regulator_set_ilim,
 };
 
-static struct regulator_ops spmi_ftsmps_ops = {
+static const struct regulator_ops spmi_ftsmps_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -1342,7 +1342,7 @@ static struct regulator_ops spmi_ftsmps_ops = {
 	.set_pull_down		= spmi_regulator_common_set_pull_down,
 };
 
-static struct regulator_ops spmi_ult_lo_smps_ops = {
+static const struct regulator_ops spmi_ult_lo_smps_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -1356,7 +1356,7 @@ static struct regulator_ops spmi_ult_lo_smps_ops = {
 	.set_pull_down		= spmi_regulator_common_set_pull_down,
 };
 
-static struct regulator_ops spmi_ult_ho_smps_ops = {
+static const struct regulator_ops spmi_ult_ho_smps_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -1371,7 +1371,7 @@ static struct regulator_ops spmi_ult_ho_smps_ops = {
 	.set_pull_down		= spmi_regulator_common_set_pull_down,
 };
 
-static struct regulator_ops spmi_ult_ldo_ops = {
+static const struct regulator_ops spmi_ult_ldo_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -1388,7 +1388,7 @@ static struct regulator_ops spmi_ult_ldo_ops = {
 	.set_soft_start		= spmi_regulator_common_set_soft_start,
 };
 
-static struct regulator_ops spmi_ftsmps426_ops = {
+static const struct regulator_ops spmi_ftsmps426_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -1403,7 +1403,7 @@ static struct regulator_ops spmi_ftsmps426_ops = {
 	.set_pull_down		= spmi_regulator_common_set_pull_down,
 };
 
-static struct regulator_ops spmi_hfs430_ops = {
+static const struct regulator_ops spmi_hfs430_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,

drivers/regulator/qcom_usb_vbus-regulator.c

+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Qualcomm PMIC VBUS output regulator driver
+//
+// Copyright (c) 2020, The Linux Foundation. All rights reserved.
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regmap.h>
+
+#define CMD_OTG				0x40
+#define OTG_EN				BIT(0)
+#define OTG_CFG				0x53
+#define OTG_EN_SRC_CFG			BIT(1)
+
+static const struct regulator_ops qcom_usb_vbus_reg_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+static struct regulator_desc qcom_usb_vbus_rdesc = {
+	.name = "usb_vbus",
+	.ops = &qcom_usb_vbus_reg_ops,
+	.owner = THIS_MODULE,
+	.type = REGULATOR_VOLTAGE,
+};
+
+static int qcom_usb_vbus_regulator_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct regulator_dev *rdev;
+	struct regmap *regmap;
+	struct regulator_config config = { };
+	struct regulator_init_data *init_data;
+	int ret;
+	u32 base;
+
+	ret = of_property_read_u32(dev->of_node, "reg", &base);
+	if (ret < 0) {
+		dev_err(dev, "no base address found\n");
+		return ret;
+	}
+
+	regmap = dev_get_regmap(dev->parent, NULL);
+	if (!regmap) {
+		dev_err(dev, "Failed to get regmap\n");
+		return -ENOENT;
+	}
+
+	init_data = of_get_regulator_init_data(dev, dev->of_node,
+					       &qcom_usb_vbus_rdesc);
+	if (!init_data)
+		return -ENOMEM;
+
+	qcom_usb_vbus_rdesc.enable_reg = base + CMD_OTG;
+	qcom_usb_vbus_rdesc.enable_mask = OTG_EN;
+	config.dev = dev;
+	config.init_data = init_data;
+	config.regmap = regmap;
+
+	rdev = devm_regulator_register(dev, &qcom_usb_vbus_rdesc, &config);
+	if (IS_ERR(rdev)) {
+		ret = PTR_ERR(rdev);
+		dev_err(dev, "not able to register vbus reg %d\n", ret);
+		return ret;
+	}
+
+	/* Disable HW logic for VBUS enable */
+	regmap_update_bits(regmap, base + OTG_CFG, OTG_EN_SRC_CFG, 0);
+
+	return 0;
+}
+
+static const struct of_device_id qcom_usb_vbus_regulator_match[] = {
+	{ .compatible = "qcom,pm8150b-vbus-reg" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, qcom_usb_vbus_regulator_match);
+
+static struct platform_driver qcom_usb_vbus_regulator_driver = {
+	.driver		= {
+		.name	= "qcom-usb-vbus-regulator",
+		.of_match_table = qcom_usb_vbus_regulator_match,
+	},
+	.probe		= qcom_usb_vbus_regulator_probe,
+};
+module_platform_driver(qcom_usb_vbus_regulator_driver);
+
+MODULE_DESCRIPTION("Qualcomm USB vbus regulator driver");
+MODULE_LICENSE("GPL v2");

drivers/regulator/stpmic1_regulator.c

@@ -15,7 +15,7 @@
 #include <dt-bindings/mfd/st,stpmic1.h>
 
 /**
- * stpmic1 regulator description: this structure is used as driver data
+ * struct stpmic1 regulator description: this structure is used as driver data
  * @desc: regulator framework description
  * @mask_reset_reg: mask reset register address
  * @mask_reset_mask: mask rank and mask reset register mask

drivers/regulator/sy8827n.c

+// SPDX-License-Identifier: GPL-2.0
+//
+// SY8827N regulator driver
+//
+// Copyright (C) 2020 Synaptics Incorporated
+//
+// Author: Jisheng Zhang <jszhang@kernel.org>
+
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+#define SY8827N_VSEL0		0
+#define   SY8827N_BUCK_EN	(1 << 7)
+#define   SY8827N_MODE		(1 << 6)
+#define SY8827N_VSEL1		1
+#define SY8827N_CTRL		2
+
+#define SY8827N_NVOLTAGES	64
+#define SY8827N_VSELMIN		600000
+#define SY8827N_VSELSTEP	12500
+
+struct sy8827n_device_info {
+	struct device *dev;
+	struct regulator_desc desc;
+	struct regulator_init_data *regulator;
+	struct gpio_desc *en_gpio;
+	unsigned int vsel_reg;
+};
+
+static int sy8827n_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	struct sy8827n_device_info *di = rdev_get_drvdata(rdev);
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		regmap_update_bits(rdev->regmap, di->vsel_reg,
+				   SY8827N_MODE, SY8827N_MODE);
+		break;
+	case REGULATOR_MODE_NORMAL:
+		regmap_update_bits(rdev->regmap, di->vsel_reg,
+				   SY8827N_MODE, 0);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static unsigned int sy8827n_get_mode(struct regulator_dev *rdev)
+{
+	struct sy8827n_device_info *di = rdev_get_drvdata(rdev);
+	u32 val;
+	int ret = 0;
+
+	ret = regmap_read(rdev->regmap, di->vsel_reg, &val);
+	if (ret < 0)
+		return ret;
+	if (val & SY8827N_MODE)
+		return REGULATOR_MODE_FAST;
+	else
+		return REGULATOR_MODE_NORMAL;
+}
+
+static const struct regulator_ops sy8827n_regulator_ops = {
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.map_voltage = regulator_map_voltage_linear,
+	.list_voltage = regulator_list_voltage_linear,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.set_mode = sy8827n_set_mode,
+	.get_mode = sy8827n_get_mode,
+};
+
+static int sy8827n_regulator_register(struct sy8827n_device_info *di,
+			struct regulator_config *config)
+{
+	struct regulator_desc *rdesc = &di->desc;
+	struct regulator_dev *rdev;
+
+	rdesc->name = "sy8827n-reg";
+	rdesc->supply_name = "vin";
+	rdesc->ops = &sy8827n_regulator_ops;
+	rdesc->type = REGULATOR_VOLTAGE;
+	rdesc->n_voltages = SY8827N_NVOLTAGES;
+	rdesc->enable_reg = di->vsel_reg;
+	rdesc->enable_mask = SY8827N_BUCK_EN;
+	rdesc->min_uV = SY8827N_VSELMIN;
+	rdesc->uV_step = SY8827N_VSELSTEP;
+	rdesc->vsel_reg = di->vsel_reg;
+	rdesc->vsel_mask = rdesc->n_voltages - 1;
+	rdesc->owner = THIS_MODULE;
+
+	rdev = devm_regulator_register(di->dev, &di->desc, config);
+	return PTR_ERR_OR_ZERO(rdev);
+}
+
+static const struct regmap_config sy8827n_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int sy8827n_i2c_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct device_node *np = dev->of_node;
+	struct sy8827n_device_info *di;
+	struct regulator_config config = { };
+	struct regmap *regmap;
+	int ret;
+
+	di = devm_kzalloc(dev, sizeof(struct sy8827n_device_info), GFP_KERNEL);
+	if (!di)
+		return -ENOMEM;
+
+	di->regulator = of_get_regulator_init_data(dev, np, &di->desc);
+	if (!di->regulator) {
+		dev_err(dev, "Platform data not found!\n");
+		return -EINVAL;
+	}
+
+	di->en_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_HIGH);
+	if (IS_ERR(di->en_gpio))
+		return PTR_ERR(di->en_gpio);
+
+	if (of_property_read_bool(np, "silergy,vsel-state-high"))
+		di->vsel_reg = SY8827N_VSEL1;
+	else
+		di->vsel_reg = SY8827N_VSEL0;
+
+	di->dev = dev;
+
+	regmap = devm_regmap_init_i2c(client, &sy8827n_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "Failed to allocate regmap!\n");
+		return PTR_ERR(regmap);
+	}
+	i2c_set_clientdata(client, di);
+
+	config.dev = di->dev;
+	config.init_data = di->regulator;
+	config.regmap = regmap;
+	config.driver_data = di;
+	config.of_node = np;
+
+	ret = sy8827n_regulator_register(di, &config);
+	if (ret < 0)
+		dev_err(dev, "Failed to register regulator!\n");
+	return ret;
+}
+
+static const struct of_device_id sy8827n_dt_ids[] = {
+	{
+		.compatible = "silergy,sy8827n",
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sy8827n_dt_ids);
+
+static const struct i2c_device_id sy8827n_id[] = {
+	{ "sy8827n", },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, sy8827n_id);
+
+static struct i2c_driver sy8827n_regulator_driver = {
+	.driver = {
+		.name = "sy8827n-regulator",
+		.of_match_table = of_match_ptr(sy8827n_dt_ids),
+	},
+	.probe_new = sy8827n_i2c_probe,
+	.id_table = sy8827n_id,
+};
+module_i2c_driver(sy8827n_regulator_driver);
+
+MODULE_AUTHOR("Jisheng Zhang <jszhang@kernel.org>");
+MODULE_DESCRIPTION("SY8827N regulator driver");
+MODULE_LICENSE("GPL v2");

drivers/regulator/tps65023-regulator.c

@@ -3,7 +3,7 @@
  *
  * Supports TPS65023 Regulator
  *
- * Copyright (C) 2009 Texas Instrument Incorporated - http://www.ti.com/
+ * Copyright (C) 2009 Texas Instrument Incorporated - https://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as

drivers/regulator/tps6507x-regulator.c

@@ -3,7 +3,7 @@
  *
  * Regulator driver for TPS65073 PMIC
  *
- * Copyright (C) 2009 Texas Instrument Incorporated - http://www.ti.com/
+ * Copyright (C) 2009 Texas Instrument Incorporated - https://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as

drivers/regulator/tps65086-regulator.c

 /*
- * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Author: Andrew F. Davis <afd@ti.com>
  *

drivers/regulator/tps65217-regulator.c

@@ -3,7 +3,7 @@
  *
  * Regulator driver for TPS65217 PMIC
  *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -124,7 +124,7 @@ static int tps65217_pmic_set_suspend_enable(struct regulator_dev *dev)
 	struct tps65217 *tps = rdev_get_drvdata(dev);
 	unsigned int rid = rdev_get_id(dev);
 
-	if (rid < TPS65217_DCDC_1 || rid > TPS65217_LDO_4)
+	if (rid > TPS65217_LDO_4)
 		return -EINVAL;
 
 	return tps65217_clear_bits(tps, dev->desc->bypass_reg,
@@ -137,7 +137,7 @@ static int tps65217_pmic_set_suspend_disable(struct regulator_dev *dev)
 	struct tps65217 *tps = rdev_get_drvdata(dev);
 	unsigned int rid = rdev_get_id(dev);
 
-	if (rid < TPS65217_DCDC_1 || rid > TPS65217_LDO_4)
+	if (rid > TPS65217_LDO_4)
 		return -EINVAL;
 
 	if (!tps->strobes[rid])
@@ -254,6 +254,9 @@ static int tps65217_regulator_probe(struct platform_device *pdev)
 
 		/* Store default strobe info */
 		ret = tps65217_reg_read(tps, regulators[i].bypass_reg, &val);
+		if (ret)
+			return ret;
+
 		tps->strobes[i] = val & regulators[i].bypass_mask;
 	}
 

drivers/regulator/tps65218-regulator.c

@@ -3,7 +3,7 @@
  *
  * Regulator driver for TPS65218 PMIC
  *
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License version 2 as
@@ -128,7 +128,7 @@ static int tps65218_pmic_set_suspend_enable(struct regulator_dev *dev)
 	struct tps65218 *tps = rdev_get_drvdata(dev);
 	unsigned int rid = rdev_get_id(dev);
 
-	if (rid < TPS65218_DCDC_1 || rid > TPS65218_LDO_1)
+	if (rid > TPS65218_LDO_1)
 		return -EINVAL;
 
 	return tps65218_clear_bits(tps, dev->desc->bypass_reg,
@@ -141,7 +141,7 @@ static int tps65218_pmic_set_suspend_disable(struct regulator_dev *dev)
 	struct tps65218 *tps = rdev_get_drvdata(dev);
 	unsigned int rid = rdev_get_id(dev);
 
-	if (rid < TPS65218_DCDC_1 || rid > TPS65218_LDO_1)
+	if (rid > TPS65218_LDO_1)
 		return -EINVAL;
 
 	/*

drivers/regulator/tps65912-regulator.c

 /*
  * Regulator driver for TI TPS65912x PMICs
  *
- * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com/
  *	Andrew F. Davis <afd@ti.com>
  *
  * This program is free software; you can redistribute it and/or

drivers/regulator/wm8350-regulator.c

@@ -1216,11 +1216,11 @@ EXPORT_SYMBOL_GPL(wm8350_register_regulator);
 /**
  * wm8350_register_led - Register a WM8350 LED output
  *
- * @param wm8350 The WM8350 device to configure.
- * @param lednum LED device index to create.
- * @param dcdc The DCDC to use for the LED.
- * @param isink The ISINK to use for the LED.
- * @param pdata Configuration for the LED.
+ * @wm8350: The WM8350 device to configure.
+ * @lednum: LED device index to create.
+ * @dcdc: The DCDC to use for the LED.
+ * @isink: The ISINK to use for the LED.
+ * @pdata: Configuration for the LED.
  *
  * The WM8350 supports the use of an ISINK together with a DCDC to
  * provide a power-efficient LED driver.  This function registers the

drivers/regulator/wm8400-regulator.c

@@ -234,9 +234,9 @@ static struct platform_driver wm8400_regulator_driver = {
  * the regulator API.  It is intended to be called from the
  * platform_init() callback of the WM8400 MFD driver.
  *
- * @param dev      The WM8400 device to operate on.
- * @param reg      The regulator to control.
- * @param initdata Regulator initdata for the regulator.
+ * @dev:      The WM8400 device to operate on.
+ * @reg:      The regulator to control.
+ * @initdata: Regulator initdata for the regulator.
  */
 int wm8400_register_regulator(struct device *dev, int reg,
 			      struct regulator_init_data *initdata)

include/dt-bindings/regulator/dlg,da9211-regulator.h

+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _DT_BINDINGS_REGULATOR_DLG_DA9211_H
+#define _DT_BINDINGS_REGULATOR_DLG_DA9211_H
+
+/*
+ * These buck mode constants may be used to specify values in device tree
+ * properties (e.g. regulator-initial-mode, regulator-allowed-modes).
+ * A description of the following modes is in the manufacturers datasheet.
+ */
+
+#define DA9211_BUCK_MODE_SLEEP		1
+#define DA9211_BUCK_MODE_SYNC		2
+#define DA9211_BUCK_MODE_AUTO		3
+
+#endif

include/dt-bindings/regulator/mediatek,mt6397-regulator.h

+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _DT_BINDINGS_REGULATOR_MEDIATEK_MT6397_H_
+#define _DT_BINDINGS_REGULATOR_MEDIATEK_MT6397_H_
+
+/*
+ * Buck mode constants which may be used in devicetree properties (eg.
+ * regulator-initial-mode, regulator-allowed-modes).
+ * See the manufacturer's datasheet for more information on these modes.
+ */
+
+#define MT6397_BUCK_MODE_AUTO		0
+#define MT6397_BUCK_MODE_FORCE_PWM	1
+
+#endif

include/linux/platform_data/cros_ec_commands.h

@@ -5430,6 +5430,89 @@ struct ec_response_rollback_info {
 /* Issue AP reset */
 #define EC_CMD_AP_RESET 0x0125
 
+/*****************************************************************************/
+/* Voltage regulator controls */
+
+/*
+ * Get basic info of voltage regulator for given index.
+ *
+ * Returns the regulator name and supported voltage list in mV.
+ */
+#define EC_CMD_REGULATOR_GET_INFO 0x012C
+
+/* Maximum length of regulator name */
+#define EC_REGULATOR_NAME_MAX_LEN 16
+
+/* Maximum length of the supported voltage list. */
+#define EC_REGULATOR_VOLTAGE_MAX_COUNT 16
+
+struct ec_params_regulator_get_info {
+	uint32_t index;
+} __ec_align4;
+
+struct ec_response_regulator_get_info {
+	char name[EC_REGULATOR_NAME_MAX_LEN];
+	uint16_t num_voltages;
+	uint16_t voltages_mv[EC_REGULATOR_VOLTAGE_MAX_COUNT];
+} __ec_align2;
+
+/*
+ * Configure the regulator as enabled / disabled.
+ */
+#define EC_CMD_REGULATOR_ENABLE 0x012D
+
+struct ec_params_regulator_enable {
+	uint32_t index;
+	uint8_t enable;
+} __ec_align4;
+
+/*
+ * Query if the regulator is enabled.
+ *
+ * Returns 1 if the regulator is enabled, 0 if not.
+ */
+#define EC_CMD_REGULATOR_IS_ENABLED 0x012E
+
+struct ec_params_regulator_is_enabled {
+	uint32_t index;
+} __ec_align4;
+
+struct ec_response_regulator_is_enabled {
+	uint8_t enabled;
+} __ec_align1;
+
+/*
+ * Set voltage for the voltage regulator within the range specified.
+ *
+ * The driver should select the voltage in range closest to min_mv.
+ *
+ * Also note that this might be called before the regulator is enabled, and the
+ * setting should be in effect after the regulator is enabled.
+ */
+#define EC_CMD_REGULATOR_SET_VOLTAGE 0x012F
+
+struct ec_params_regulator_set_voltage {
+	uint32_t index;
+	uint32_t min_mv;
+	uint32_t max_mv;
+} __ec_align4;
+
+/*
+ * Get the currently configured voltage for the voltage regulator.
+ *
+ * Note that this might be called before the regulator is enabled, and this
+ * should return the configured output voltage if the regulator is enabled.
+ */
+#define EC_CMD_REGULATOR_GET_VOLTAGE 0x0130
+
+struct ec_params_regulator_get_voltage {
+	uint32_t index;
+} __ec_align4;
+
+struct ec_response_regulator_get_voltage {
+	uint32_t voltage_mv;
+} __ec_align4;
+
 /*****************************************************************************/
 /* The command range 0x200-0x2FF is reserved for Rotor. */
 

include/linux/regulator/consumer.h

@@ -32,10 +32,12 @@
 #define __LINUX_REGULATOR_CONSUMER_H_
 
 #include <linux/err.h>
+#include <linux/suspend.h>
 
 struct device;
 struct notifier_block;
 struct regmap;
+struct regulator_dev;
 
 /*
  * Regulator operating modes.
@@ -277,6 +279,14 @@ int regulator_unregister_notifier(struct regulator *regulator,
 void devm_regulator_unregister_notifier(struct regulator *regulator,
 					struct notifier_block *nb);
 
+/* regulator suspend */
+int regulator_suspend_enable(struct regulator_dev *rdev,
+			     suspend_state_t state);
+int regulator_suspend_disable(struct regulator_dev *rdev,
+			      suspend_state_t state);
+int regulator_set_suspend_voltage(struct regulator *regulator, int min_uV,
+				  int max_uV, suspend_state_t state);
+
 /* driver data - core doesn't touch */
 void *regulator_get_drvdata(struct regulator *regulator);
 void regulator_set_drvdata(struct regulator *regulator, void *data);

include/linux/regulator/driver.h

@@ -117,7 +117,7 @@ enum regulator_status {
  *                       suspended.
  * @set_suspend_mode: Set the operating mode for the regulator when the
  *                    system is suspended.
- *
+ * @resume: Resume operation of suspended regulator.
  * @set_pull_down: Configure the regulator to pull down when the regulator
  *		   is disabled.
  *
@@ -305,6 +305,9 @@ enum regulator_type {
  * @enable_time: Time taken for initial enable of regulator (in uS).
  * @off_on_delay: guard time (in uS), before re-enabling a regulator
  *
+ * @poll_enabled_time: The polling interval (in uS) to use while checking that
+ *                     the regulator was actually enabled. Max upto enable_time.
+ *
  * @of_map_mode: Maps a hardware mode defined in a DeviceTree to a standard mode
  */
 struct regulator_desc {
@@ -372,6 +375,8 @@ struct regulator_desc {
 
 	unsigned int off_on_delay;
 
+	unsigned int poll_enabled_time;
+
 	unsigned int (*of_map_mode)(unsigned int mode);
 };
 

include/linux/regulator/machine.h

@@ -101,6 +101,7 @@ struct regulator_state {
  * @system_load: Load that isn't captured by any consumer requests.
  *
  * @max_spread: Max possible spread between coupled regulators
+ * @max_uV_step: Max possible step change in voltage
  * @valid_modes_mask: Mask of modes which may be configured by consumers.
  * @valid_ops_mask: Operations which may be performed by consumers.
  *

include/linux/regulator/pca9450.h

+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* Copyright 2020 NXP. */
+
+#ifndef __LINUX_REG_PCA9450_H__
+#define __LINUX_REG_PCA9450_H__
+
+#include <linux/regmap.h>
+
+enum pca9450_chip_type {
+	PCA9450_TYPE_PCA9450A = 0,
+	PCA9450_TYPE_PCA9450BC,
+	PCA9450_TYPE_AMOUNT,
+};
+
+enum {
+	PCA9450_BUCK1 = 0,
+	PCA9450_BUCK2,
+	PCA9450_BUCK3,
+	PCA9450_BUCK4,
+	PCA9450_BUCK5,
+	PCA9450_BUCK6,
+	PCA9450_LDO1,
+	PCA9450_LDO2,
+	PCA9450_LDO3,
+	PCA9450_LDO4,
+	PCA9450_LDO5,
+	PCA9450_REGULATOR_CNT,
+};
+
+enum {
+	PCA9450_DVS_LEVEL_RUN = 0,
+	PCA9450_DVS_LEVEL_STANDBY,
+	PCA9450_DVS_LEVEL_MAX,
+};
+
+#define PCA9450_BUCK1_VOLTAGE_NUM	0x80
+#define PCA9450_BUCK2_VOLTAGE_NUM	0x80
+#define PCA9450_BUCK3_VOLTAGE_NUM	0x80
+#define PCA9450_BUCK4_VOLTAGE_NUM	0x80
+
+#define PCA9450_BUCK5_VOLTAGE_NUM	0x80
+#define PCA9450_BUCK6_VOLTAGE_NUM	0x80
+
+#define PCA9450_LDO1_VOLTAGE_NUM	0x08
+#define PCA9450_LDO2_VOLTAGE_NUM	0x08
+#define PCA9450_LDO3_VOLTAGE_NUM	0x20
+#define PCA9450_LDO4_VOLTAGE_NUM	0x20
+#define PCA9450_LDO5_VOLTAGE_NUM	0x10
+
+enum {
+	PCA9450_REG_DEV_ID	    = 0x00,
+	PCA9450_REG_INT1	    = 0x01,
+	PCA9450_REG_INT1_MSK	    = 0x02,
+	PCA9450_REG_STATUS1	    = 0x03,
+	PCA9450_REG_STATUS2	    = 0x04,
+	PCA9450_REG_PWRON_STAT	    = 0x05,
+	PCA9450_REG_SWRST	    = 0x06,
+	PCA9450_REG_PWRCTRL         = 0x07,
+	PCA9450_REG_RESET_CTRL      = 0x08,
+	PCA9450_REG_CONFIG1         = 0x09,
+	PCA9450_REG_CONFIG2         = 0x0A,
+	PCA9450_REG_BUCK123_DVS     = 0x0C,
+	PCA9450_REG_BUCK1OUT_LIMIT  = 0x0D,
+	PCA9450_REG_BUCK2OUT_LIMIT  = 0x0E,
+	PCA9450_REG_BUCK3OUT_LIMIT  = 0x0F,
+	PCA9450_REG_BUCK1CTRL       = 0x10,
+	PCA9450_REG_BUCK1OUT_DVS0   = 0x11,
+	PCA9450_REG_BUCK1OUT_DVS1   = 0x12,
+	PCA9450_REG_BUCK2CTRL       = 0x13,
+	PCA9450_REG_BUCK2OUT_DVS0   = 0x14,
+	PCA9450_REG_BUCK2OUT_DVS1   = 0x15,
+	PCA9450_REG_BUCK3CTRL       = 0x16,
+	PCA9450_REG_BUCK3OUT_DVS0   = 0x17,
+	PCA9450_REG_BUCK3OUT_DVS1   = 0x18,
+	PCA9450_REG_BUCK4CTRL       = 0x19,
+	PCA9450_REG_BUCK4OUT        = 0x1A,
+	PCA9450_REG_BUCK5CTRL       = 0x1B,
+	PCA9450_REG_BUCK5OUT        = 0x1C,
+	PCA9450_REG_BUCK6CTRL       = 0x1D,
+	PCA9450_REG_BUCK6OUT        = 0x1E,
+	PCA9450_REG_LDO_AD_CTRL     = 0x20,
+	PCA9450_REG_LDO1CTRL        = 0x21,
+	PCA9450_REG_LDO2CTRL        = 0x22,
+	PCA9450_REG_LDO3CTRL        = 0x23,
+	PCA9450_REG_LDO4CTRL        = 0x24,
+	PCA9450_REG_LDO5CTRL_L      = 0x25,
+	PCA9450_REG_LDO5CTRL_H      = 0x26,
+	PCA9450_REG_LOADSW_CTRL     = 0x2A,
+	PCA9450_REG_VRFLT1_STS      = 0x2B,
+	PCA9450_REG_VRFLT2_STS      = 0x2C,
+	PCA9450_REG_VRFLT1_MASK     = 0x2D,
+	PCA9450_REG_VRFLT2_MASK     = 0x2E,
+	PCA9450_MAX_REGISTER	    = 0x2F,
+};
+
+/* PCA9450 BUCK ENMODE bits */
+#define BUCK_ENMODE_OFF			0x00
+#define BUCK_ENMODE_ONREQ		0x01
+#define BUCK_ENMODE_ONREQ_STBYREQ	0x02
+#define BUCK_ENMODE_ON			0x03
+
+/* PCA9450_REG_BUCK1_CTRL bits */
+#define BUCK1_RAMP_MASK			0xC0
+#define BUCK1_RAMP_25MV			0x0
+#define BUCK1_RAMP_12P5MV		0x1
+#define BUCK1_RAMP_6P25MV		0x2
+#define BUCK1_RAMP_3P125MV		0x3
+#define BUCK1_DVS_CTRL			0x10
+#define BUCK1_AD			0x08
+#define BUCK1_FPWM			0x04
+#define BUCK1_ENMODE_MASK		0x03
+
+/* PCA9450_REG_BUCK2_CTRL bits */
+#define BUCK2_RAMP_MASK			0xC0
+#define BUCK2_RAMP_25MV			0x0
+#define BUCK2_RAMP_12P5MV		0x1
+#define BUCK2_RAMP_6P25MV		0x2
+#define BUCK2_RAMP_3P125MV		0x3
+#define BUCK2_DVS_CTRL			0x10
+#define BUCK2_AD			0x08
+#define BUCK2_FPWM			0x04
+#define BUCK2_ENMODE_MASK		0x03
+
+/* PCA9450_REG_BUCK3_CTRL bits */
+#define BUCK3_RAMP_MASK			0xC0
+#define BUCK3_RAMP_25MV			0x0
+#define BUCK3_RAMP_12P5MV		0x1
+#define BUCK3_RAMP_6P25MV		0x2
+#define BUCK3_RAMP_3P125MV		0x3
+#define BUCK3_DVS_CTRL			0x10
+#define BUCK3_AD			0x08
+#define BUCK3_FPWM			0x04
+#define BUCK3_ENMODE_MASK		0x03
+
+/* PCA9450_REG_BUCK4_CTRL bits */
+#define BUCK4_AD			0x08
+#define BUCK4_FPWM			0x04
+#define BUCK4_ENMODE_MASK		0x03
+
+/* PCA9450_REG_BUCK5_CTRL bits */
+#define BUCK5_AD			0x08
+#define BUCK5_FPWM			0x04
+#define BUCK5_ENMODE_MASK		0x03
+
+/* PCA9450_REG_BUCK6_CTRL bits */
+#define BUCK6_AD			0x08
+#define BUCK6_FPWM			0x04
+#define BUCK6_ENMODE_MASK		0x03
+
+/* PCA9450_BUCK1OUT_DVS0 bits */
+#define BUCK1OUT_DVS0_MASK		0x7F
+#define BUCK1OUT_DVS0_DEFAULT		0x14
+
+/* PCA9450_BUCK1OUT_DVS1 bits */
+#define BUCK1OUT_DVS1_MASK		0x7F
+#define BUCK1OUT_DVS1_DEFAULT		0x14
+
+/* PCA9450_BUCK2OUT_DVS0 bits */
+#define BUCK2OUT_DVS0_MASK		0x7F
+#define BUCK2OUT_DVS0_DEFAULT		0x14
+
+/* PCA9450_BUCK2OUT_DVS1 bits */
+#define BUCK2OUT_DVS1_MASK		0x7F
+#define BUCK2OUT_DVS1_DEFAULT		0x14
+
+/* PCA9450_BUCK3OUT_DVS0 bits */
+#define BUCK3OUT_DVS0_MASK		0x7F
+#define BUCK3OUT_DVS0_DEFAULT		0x14
+
+/* PCA9450_BUCK3OUT_DVS1 bits */
+#define BUCK3OUT_DVS1_MASK		0x7F
+#define BUCK3OUT_DVS1_DEFAULT		0x14
+
+/* PCA9450_REG_BUCK4OUT bits */
+#define BUCK4OUT_MASK			0x7F
+#define BUCK4OUT_DEFAULT		0x6C
+
+/* PCA9450_REG_BUCK5OUT bits */
+#define BUCK5OUT_MASK			0x7F
+#define BUCK5OUT_DEFAULT		0x30
+
+/* PCA9450_REG_BUCK6OUT bits */
+#define BUCK6OUT_MASK			0x7F
+#define BUCK6OUT_DEFAULT		0x14
+
+/* PCA9450_REG_LDO1_VOLT bits */
+#define LDO1_EN_MASK			0xC0
+#define LDO1OUT_MASK			0x07
+
+/* PCA9450_REG_LDO2_VOLT bits */
+#define LDO2_EN_MASK			0xC0
+#define LDO2OUT_MASK			0x07
+
+/* PCA9450_REG_LDO3_VOLT bits */
+#define LDO3_EN_MASK			0xC0
+#define LDO3OUT_MASK			0x0F
+
+/* PCA9450_REG_LDO4_VOLT bits */
+#define LDO4_EN_MASK			0xC0
+#define LDO4OUT_MASK			0x0F
+
+/* PCA9450_REG_LDO5_VOLT bits */
+#define LDO5L_EN_MASK			0xC0
+#define LDO5LOUT_MASK			0x0F
+
+#define LDO5H_EN_MASK			0xC0
+#define LDO5HOUT_MASK			0x0F
+
+/* PCA9450_REG_IRQ bits */
+#define IRQ_PWRON			0x80
+#define IRQ_WDOGB			0x40
+#define IRQ_RSVD			0x20
+#define IRQ_VR_FLT1			0x10
+#define IRQ_VR_FLT2			0x08
+#define IRQ_LOWVSYS			0x04
+#define IRQ_THERM_105			0x02
+#define IRQ_THERM_125			0x01
+
+#endif /* __LINUX_REG_PCA9450_H__ */