Commit 3f33b0aa authored by Steven A. Falco's avatar Steven A. Falco Committed by David Woodhouse

mtd: Bug in m25p80.c during whole-chip erase

There is a logic error in "whole chip erase" for the m25p80 family.  If
the whole device is successfully erased, erase_chip() will return 0, and
the code will fall through to the "else" clause, and do sector-by-sector
erase in addition to the whole-chip erase.  This patch corrects that.

Also, the MAX_READY_WAIT_COUNT is insufficient for an m25p16 connected
to a 400 MHz powerpc.  Increasing it allows me to successfully program
the device on my board.
Signed-off-by: default avatarSteven A. Falco <sfalco@harris.com>
Signed-off-by: default avatarDavid Woodhouse <David.Woodhouse@intel.com>
parent e7693548
......@@ -54,7 +54,7 @@
#define SR_SRWD 0x80 /* SR write protect */
/* Define max times to check status register before we give up. */
#define MAX_READY_WAIT_COUNT 100000
#define MAX_READY_WAIT_COUNT 1000000
#define CMD_SIZE 4
#ifdef CONFIG_M25PXX_USE_FAST_READ
......@@ -246,10 +246,12 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr)
mutex_lock(&flash->lock);
/* whole-chip erase? */
if (len == flash->mtd.size && erase_chip(flash)) {
if (len == flash->mtd.size) {
if (erase_chip(flash)) {
instr->state = MTD_ERASE_FAILED;
mutex_unlock(&flash->lock);
return -EIO;
}
/* REVISIT in some cases we could speed up erasing large regions
* by using OPCODE_SE instead of OPCODE_BE_4K. We may have set up
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment