Skip to content

L
linux
Commit 3f4533c3 authored by David Mosberger's avatar David Mosberger
Browse files
Options

Merge wailua.hpl.hp.com:/bk/vanilla/linux-2.5 

into wailua.hpl.hp.com:/bk/lia64/to-linus-2.5
parents 92ebc650 be0ff4bd
Hide whitespace changes
Inline Side-by-side
Showing with 6354 additions and 1524 deletions
arch/ia64/Config.help
View file @ 3f4533c3
......@@ -414,12 +414,18 @@ CONFIG_IA64_GENERIC
HP-simulator For the HP simulator
(<http://software.hp.com/ia64linux/>).
HP-zx1 For HP zx1 platforms.
SN1-simulator For the SGI SN1 simulator.
DIG-compliant For DIG ("Developer's Interface Guide") compliant
system.
systems.
If you don't know what to do, choose "generic".
CONFIG_IA64_HP_ZX1
Build a kernel that runs on HP zx1-based systems. This adds support
for the zx1 IOMMU and makes root bus bridges appear in PCI config space
(required for zx1 agpgart support).
CONFIG_IA64_PAGE_SIZE_4KB
This lets you select the page size of the kernel. For best IA-64
performance, a page size of 8KB or 16KB is recommended. For best
......@@ -440,6 +446,32 @@ CONFIG_ITANIUM_BSTEP_SPECIFIC
with a B-step CPU. You have a B-step CPU if the "revision" field in
/proc/cpuinfo has a value in the range from 1 to 4.
CONFIG_IA64_SGI_AUTOTEST
Build a kernel used for hardware validation. If you include the
keyword "autotest" on the boot command line, the kernel does NOT boot.
Instead, it starts all cpus and runs cache coherency tests instead.
If unsure, say N.
CONFIG_IA64_SGI_SN_DEBUG
Turns on extra debugging code in the SGI SN (Scalable NUMA) platform
for IA64. Unless you are debugging problems on an SGI SN IA64 box,
say N.
CONFIG_IA64_SGI_SN_SIM
If you are compiling a kernel that will run under SGI's IA64
simulator (Medusa) then say Y, otherwise say N.
CONFIG_SERIAL_SGI_L1_PROTOCOL
Uses protocol mode instead of raw mode for the level 1 console on the
SGI SN (Scalable NUMA) platform for IA64. If you are compiling for
an SGI SN box then Y is the recommended value, otherwise say N.
CONFIG_PCIBA
IRIX PCIBA-inspired user mode PCI interface for the SGI SN (Scalable
NUMA) platform for IA64. Unless you are compiling a kernel for an
SGI SN IA64 box, say N.
CONFIG_IA64_MCA
Say Y here to enable machine check support for IA-64. If you're
unsure, answer Y.
......
arch/ia64/Makefile
View file @ 3f4533c3
......@@ -22,7 +22,7 @@ CFLAGS := $(CFLAGS) -pipe $(EXTRA) -ffixed-r13 -mfixed-range=f10-f15,f32-f127 \
# -ffunction-sections
CFLAGS_KERNEL := -mconstant-gp
GCC_VERSION=$(shell $(CROSS_COMPILE)$(HOSTCC) -v 2>&1 | fgrep 'gcc version' | cut -f3 -d' ' | cut -f1 -d'.')
GCC_VERSION=$(shell $(CC) -v 2>&1 | fgrep 'gcc version' | cut -f3 -d' ' | cut -f1 -d'.')
ifneq ($(GCC_VERSION),2)
CFLAGS += -frename-registers --param max-inline-insns=2000
......@@ -33,16 +33,11 @@ ifeq ($(CONFIG_ITANIUM_BSTEP_SPECIFIC),y)
endif
ifdef CONFIG_IA64_GENERIC
CORE_FILES := arch/$(ARCH)/hp/hp.a \
arch/$(ARCH)/sn/sn.o \
arch/$(ARCH)/dig/dig.a \
arch/$(ARCH)/sn/io/sgiio.o \
CORE_FILES := arch/$(ARCH)/hp/hp.o \
arch/$(ARCH)/dig/dig.a \
$(CORE_FILES)
SUBDIRS := arch/$(ARCH)/hp \
arch/$(ARCH)/sn/sn1 \
arch/$(ARCH)/sn \
arch/$(ARCH)/dig \
arch/$(ARCH)/sn/io \
$(SUBDIRS)
else # !GENERIC
......@@ -50,7 +45,16 @@ else # !GENERIC
ifdef CONFIG_IA64_HP_SIM
SUBDIRS := arch/$(ARCH)/hp \
$(SUBDIRS)
CORE_FILES := arch/$(ARCH)/hp/hp.a \
CORE_FILES := arch/$(ARCH)/hp/hp.o \
$(CORE_FILES)
endif
ifdef CONFIG_IA64_HP_ZX1
SUBDIRS := arch/$(ARCH)/hp \
arch/$(ARCH)/dig \
$(SUBDIRS)
CORE_FILES := arch/$(ARCH)/hp/hp.o \
arch/$(ARCH)/dig/dig.a \
$(CORE_FILES)
endif
......
arch/ia64/config.in
View file @ 3f4533c3
......@@ -22,6 +22,7 @@ choice 'IA-64 system type' \
"generic CONFIG_IA64_GENERIC \
DIG-compliant CONFIG_IA64_DIG \
HP-simulator CONFIG_IA64_HP_SIM \
HP-zx1 CONFIG_IA64_HP_ZX1 \
SGI-SN1 CONFIG_IA64_SGI_SN1 \
SGI-SN2 CONFIG_IA64_SGI_SN2" generic
......@@ -56,7 +57,7 @@ if [ "$CONFIG_MCKINLEY" = "y" ]; then
fi
fi
if [ "$CONFIG_IA64_DIG" = "y" ]; then
if [ "$CONFIG_IA64_GENERIC" = "y" ] || [ "$CONFIG_IA64_DIG" = "y" ] || [ "$CONFIG_IA64_HP_ZX1" = "y" ]; then
bool ' Enable IA-64 Machine Check Abort' CONFIG_IA64_MCA
define_bool CONFIG_PM y
fi
......
arch/ia64/defconfig
View file @ 3f4533c3
......@@ -23,7 +23,7 @@ CONFIG_MODVERSIONS=y
# CONFIG_KMOD is not set
#
# General setup
# Processor type and features
#
CONFIG_IA64=y
# CONFIG_ISA is not set
......@@ -32,21 +32,22 @@ CONFIG_IA64=y
# CONFIG_SBUS is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ACPI=y
CONFIG_ACPI_EFI=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_KERNEL_CONFIG=y
CONFIG_ITANIUM=y
# CONFIG_MCKINLEY is not set
# CONFIG_IA64_GENERIC is not set
CONFIG_IA64_DIG=y
# CONFIG_IA64_HP_SIM is not set
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_IA64_SGI_SN1 is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
CONFIG_ACPI=y
CONFIG_ACPI_EFI=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_KERNEL_CONFIG=y
CONFIG_IA64_BRL_EMU=y
# CONFIG_ITANIUM_BSTEP_SPECIFIC is not set
CONFIG_IA64_L1_CACHE_SHIFT=6
......@@ -60,15 +61,23 @@ CONFIG_IA64_PALINFO=y
CONFIG_EFI_VARS=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUSMGR=y
CONFIG_ACPI_SYS=y
CONFIG_ACPI_CPU=y
#
# ACPI Support
#
CONFIG_ACPI=y
CONFIG_ACPI_EFI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_CMBATT=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_DEBUG is not set
CONFIG_PCI=y
CONFIG_PCI_NAMES=y
# CONFIG_HOTPLUG is not set
......@@ -231,15 +240,13 @@ CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_AMD74XX_OVERRIDE is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_HPT34X_AUTODMA is not set
# CONFIG_BLK_DEV_HPT366 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_PIIX_TUNING is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC_ADMA is not set
......@@ -254,7 +261,6 @@ CONFIG_BLK_DEV_PIIX=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_DMA_NONPCI is not set
CONFIG_BLK_DEV_IDE_MODES=y
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set
......@@ -691,8 +697,6 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_EFI_PARTITION=y
# CONFIG_DEVFS_GUID is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
......@@ -726,6 +730,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
......@@ -814,8 +819,9 @@ CONFIG_USB_UHCI=m
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_BLUETOOTH is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
......@@ -825,13 +831,12 @@ CONFIG_USB_UHCI=m
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
......@@ -849,23 +854,24 @@ CONFIG_USB_MOUSE=m
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_KONICAWC is not set
#
# USB Network adaptors
#
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
......@@ -897,9 +903,11 @@ CONFIG_USB_MOUSE=m
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
......@@ -907,8 +915,10 @@ CONFIG_USB_MOUSE=m
#
# USB Miscellaneous drivers
#
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
#
# Library routines
......@@ -936,11 +946,3 @@ CONFIG_IA64_EARLY_PRINTK=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
CONFIG_KDB=y
# CONFIG_KDB_MODULES is not set
# CONFIG_KDB_OFF is not set
#
# Load all symbols for debugging is required for KDB
#
CONFIG_KALLSYMS=y
arch/ia64/dig/setup.c
View file @ 3f4533c3
......@@ -33,9 +33,6 @@
* is sufficient (the IDE driver will autodetect the drive geometry).
*/
char drive_info[4*16];
extern int pcat_compat;
unsigned char aux_device_present = 0xaa; /* XXX remove this when legacy I/O is gone */
void __init
dig_setup (char **cmdline_p)
......@@ -85,16 +82,4 @@ dig_setup (char **cmdline_p)
void __init
dig_irq_init (void)
{
if (pcat_compat) {
/*
* Disable the compatibility mode interrupts (8259 style), needs IN/OUT support
* enabled.
*/
printk("%s: Disabling PC-AT compatible 8259 interrupts\n", __FUNCTION__);
outb(0xff, 0xA1);
outb(0xff, 0x21);
} else {
printk("%s: System doesn't have PC-AT compatible dual-8259 setup. "
"Nothing to be done\n", __FUNCTION__);
}
}
arch/ia64/hp/Config.in 0 → 100644
View file @ 3f4533c3
mainmenu_option next_comment
comment 'HP Simulator drivers'
bool 'Simulated Ethernet ' CONFIG_HP_SIMETH
bool 'Simulated serial driver support' CONFIG_HP_SIMSERIAL
if [ "$CONFIG_SCSI" != "n" ]; then
bool 'Simulated SCSI disk' CONFIG_HP_SIMSCSI
fi
endmenu
arch/ia64/hp/Makefile
View file @ 3f4533c3
#
# ia64/platform/hp/Makefile
#
# Copyright (C) 2002 Hewlett-Packard Co.
# David Mosberger-Tang <davidm@hpl.hp.com>
# Copyright (C) 1999 Silicon Graphics, Inc.
# Copyright (C) Srinivasa Thirumalachar (sprasad@engr.sgi.com)
#
# arch/ia64/hp/Makefile
# Copyright (c) 2002 Matthew Wilcox for Hewlett Packard
all: hp.a
ALL_SUB_DIRS := sim zx1 common
O_TARGET := hp.a
O_TARGET := hp.o
obj-y := hpsim_console.o hpsim_irq.o hpsim_setup.o
obj-$(CONFIG_IA64_GENERIC) += hpsim_machvec.o
subdir-$(CONFIG_IA64_GENERIC) += $(ALL_SUB_DIRS)
subdir-$(CONFIG_IA64_HP_SIM) += sim
subdir-$(CONFIG_IA64_HP_ZX1) += zx1 common
obj-$(CONFIG_SIMETH) += simeth.o
obj-$(CONFIG_SIM_SERIAL) += simserial.o
obj-$(CONFIG_SCSI_SIM) += simscsi.o
clean::
SUB_DIRS := $(subdir-y)
obj-y += $(join $(subdir-y),$(subdir-y:%=/%.o))
include $(TOPDIR)/Rules.make
arch/ia64/hp/common/Makefile 0 → 100644
View file @ 3f4533c3
#
# ia64/platform/hp/common/Makefile
#
# Copyright (C) 2002 Hewlett Packard
# Copyright (C) Alex Williamson (alex_williamson@hp.com)
#
O_TARGET := common.o
export-objs := sba_iommu.o
obj-y := sba_iommu.o
include $(TOPDIR)/Rules.make
#
# ia64/platform/hp/common/Makefile
#
# Copyright (C) 2002 Hewlett Packard
# Copyright (C) Alex Williamson (alex_williamson@hp.com)
#
O_TARGET := common.o
export-objs := sba_iommu.o
obj-y := sba_iommu.o
include $(TOPDIR)/Rules.make
arch/ia64/hp/common/sba_iommu.c 0 → 100644
View file @ 3f4533c3
This source diff could not be displayed because it is too large. You can view the blob instead.
arch/ia64/hp/sim/Makefile 0 → 100644
View file @ 3f4533c3
#
# ia64/platform/hp/sim/Makefile
#
# Copyright (C) 2002 Hewlett-Packard Co.
# David Mosberger-Tang <davidm@hpl.hp.com>
# Copyright (C) 1999 Silicon Graphics, Inc.
# Copyright (C) Srinivasa Thirumalachar (sprasad@engr.sgi.com)
#
O_TARGET := sim.o
obj-y := hpsim_console.o hpsim_irq.o hpsim_setup.o
obj-$(CONFIG_IA64_GENERIC) += hpsim_machvec.o
obj-$(CONFIG_HP_SIMETH) += simeth.o
obj-$(CONFIG_HP_SIMSERIAL) += simserial.o
obj-$(CONFIG_HP_SIMSCSI) += simscsi.o
include $(TOPDIR)/Rules.make
arch/ia64/hp/zx1/Makefile 0 → 100644
View file @ 3f4533c3
#
# ia64/platform/hp/zx1/Makefile
#
# Copyright (C) 2002 Hewlett Packard
# Copyright (C) Alex Williamson (alex_williamson@hp.com)
#
O_TARGET := zx1.o
obj-y := hpzx1_misc.o
obj-$(CONFIG_IA64_GENERIC) += hpzx1_machvec.o
include $(TOPDIR)/Rules.make
#
# ia64/platform/hp/zx1/Makefile
#
# Copyright (C) 2002 Hewlett Packard
# Copyright (C) Alex Williamson (alex_williamson@hp.com)
#
O_TARGET := zx1.o
obj-y := hpzx1_misc.o
obj-$(CONFIG_IA64_GENERIC) += hpzx1_machvec.o
include $(TOPDIR)/Rules.make
arch/ia64/hp/zx1/hpzx1_machvec.c 0 → 100644
View file @ 3f4533c3
#define MACHVEC_PLATFORM_NAME hpzx1
#include <asm/machvec_init.h>
#define MACHVEC_PLATFORM_NAME hpzx1
#include <asm/machvec_init.h>
arch/ia64/hp/zx1/hpzx1_misc.c 0 → 100644
View file @ 3f4533c3
/*
* Misc. support for HP zx1 chipset support
*
* Copyright (C) 2002 Hewlett-Packard Co
* Copyright (C) 2002 Alex Williamson <alex_williamson@hp.com>
* Copyright (C) 2002 Bjorn Helgaas <bjorn_helgaas@hp.com>
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/acpi.h>
#include <asm/iosapic.h>
#include <asm/efi.h>
#include "../drivers/acpi/include/platform/acgcc.h"
#include "../drivers/acpi/include/actypes.h"
#include "../drivers/acpi/include/acexcep.h"
#include "../drivers/acpi/include/acpixf.h"
#include "../drivers/acpi/include/actbl.h"
#include "../drivers/acpi/include/acconfig.h"
#include "../drivers/acpi/include/acmacros.h"
#include "../drivers/acpi/include/aclocal.h"
#include "../drivers/acpi/include/acobject.h"
#include "../drivers/acpi/include/acstruct.h"
#include "../drivers/acpi/include/acnamesp.h"
#include "../drivers/acpi/include/acutils.h"
#define PFX "hpzx1: "
struct fake_pci_dev {
struct fake_pci_dev *next;
unsigned char bus;
unsigned int devfn;
int sizing; // in middle of BAR sizing operation?
unsigned long csr_base;
unsigned int csr_size;
unsigned long mapped_csrs; // ioremapped
};
static struct fake_pci_dev *fake_pci_head, **fake_pci_tail = &fake_pci_head;
static struct pci_ops orig_pci_ops;
static inline struct fake_pci_dev *
fake_pci_find_slot(unsigned char bus, unsigned int devfn)
{
struct fake_pci_dev *dev;
for (dev = fake_pci_head; dev; dev = dev->next)
if (dev->bus == bus && dev->devfn == devfn)
return dev;
return NULL;
}
static struct fake_pci_dev *
alloc_fake_pci_dev(void)
{
struct fake_pci_dev *dev;
dev = kmalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return NULL;
memset(dev, 0, sizeof(*dev));
*fake_pci_tail = dev;
fake_pci_tail = &dev->next;
return dev;
}
#define HP_CFG_RD(sz, bits, name) \
static int hp_cfg_read##sz (struct pci_dev *dev, int where, u##bits *value) \
{ \
struct fake_pci_dev *fake_dev; \
if (!(fake_dev = fake_pci_find_slot(dev->bus->number, dev->devfn))) \
return orig_pci_ops.name(dev, where, value); \
\
switch (where) { \
case PCI_COMMAND: \
*value = read##sz(fake_dev->mapped_csrs + where); \
*value |= PCI_COMMAND_MEMORY; /* SBA omits this */ \
break; \
case PCI_BASE_ADDRESS_0: \
if (fake_dev->sizing) \
*value = ~(fake_dev->csr_size - 1); \
else \
*value = (fake_dev->csr_base & \
PCI_BASE_ADDRESS_MEM_MASK) | \
PCI_BASE_ADDRESS_SPACE_MEMORY; \
fake_dev->sizing = 0; \
break; \
default: \
*value = read##sz(fake_dev->mapped_csrs + where); \
break; \
} \
return PCIBIOS_SUCCESSFUL; \
}
#define HP_CFG_WR(sz, bits, name) \
static int hp_cfg_write##sz (struct pci_dev *dev, int where, u##bits value) \
{ \
struct fake_pci_dev *fake_dev; \
if (!(fake_dev = fake_pci_find_slot(dev->bus->number, dev->devfn))) \
return orig_pci_ops.name(dev, where, value); \
\
switch (where) { \
case PCI_BASE_ADDRESS_0: \
if (value == ~0) \
fake_dev->sizing = 1; \
break; \
default: \
write##sz(value, fake_dev->mapped_csrs + where); \
break; \
} \
return PCIBIOS_SUCCESSFUL; \
}
HP_CFG_RD(b, 8, read_byte)
HP_CFG_RD(w, 16, read_word)
HP_CFG_RD(l, 32, read_dword)
HP_CFG_WR(b, 8, write_byte)
HP_CFG_WR(w, 16, write_word)
HP_CFG_WR(l, 32, write_dword)
static struct pci_ops hp_pci_conf = {
hp_cfg_readb,
hp_cfg_readw,
hp_cfg_readl,
hp_cfg_writeb,
hp_cfg_writew,
hp_cfg_writel,
};
/*
* Assume we'll never have a physical slot higher than 0x10, so we can
* use slots above that for "fake" PCI devices to represent things
* that only show up in the ACPI namespace.
*/
#define HP_MAX_SLOT 0x10
static struct fake_pci_dev *
hpzx1_fake_pci_dev(unsigned long addr, unsigned int bus, unsigned int size)
{
struct fake_pci_dev *dev;
int slot;
// Note: lspci thinks 0x1f is invalid
for (slot = 0x1e; slot > HP_MAX_SLOT; slot--) {
if (!fake_pci_find_slot(bus, PCI_DEVFN(slot, 0)))
break;
}
if (slot == HP_MAX_SLOT) {
printk(KERN_ERR PFX
"no slot space for device (0x%p) on bus 0x%02x\n",
(void *) addr, bus);
return NULL;
}
dev = alloc_fake_pci_dev();
if (!dev) {
printk(KERN_ERR PFX
"no memory for device (0x%p) on bus 0x%02x\n",
(void *) addr, bus);
return NULL;
}
dev->bus = bus;
dev->devfn = PCI_DEVFN(slot, 0);
dev->csr_base = addr;
dev->csr_size = size;
/*
* Drivers should ioremap what they need, but we have to do
* it here, too, so PCI config accesses work.
*/
dev->mapped_csrs = ioremap(dev->csr_base, dev->csr_size);
return dev;
}
typedef struct {
u8 guid_id;
u8 guid[16];
u8 csr_base[8];
u8 csr_length[8];
} acpi_hp_vendor_long;
#define HP_CCSR_LENGTH 0x21
#define HP_CCSR_TYPE 0x2
#define HP_CCSR_GUID EFI_GUID(0x69e9adf9, 0x924f, 0xab5f, \
0xf6, 0x4a, 0x24, 0xd2, 0x01, 0x37, 0x0e, 0xad)
extern acpi_status acpi_get_crs(acpi_handle, acpi_buffer *);
extern acpi_resource *acpi_get_crs_next(acpi_buffer *, int *);
extern acpi_resource_data *acpi_get_crs_type(acpi_buffer *, int *, int);
extern void acpi_dispose_crs(acpi_buffer *);
extern acpi_status acpi_cf_evaluate_method(acpi_handle, UINT8 *, NATIVE_UINT *);
static acpi_status
hp_csr_space(acpi_handle obj, u64 *csr_base, u64 *csr_length)
{
int i, offset = 0;
acpi_status status;
acpi_buffer buf;
acpi_resource_vendor *res;
acpi_hp_vendor_long *hp_res;
efi_guid_t vendor_guid;
*csr_base = 0;
*csr_length = 0;
status = acpi_get_crs(obj, &buf);
if (status != AE_OK) {
printk(KERN_ERR PFX "Unable to get _CRS data on object\n");
return status;
}
res = (acpi_resource_vendor *)acpi_get_crs_type(&buf, &offset, ACPI_RSTYPE_VENDOR);
if (!res) {
printk(KERN_ERR PFX "Failed to find config space for device\n");
acpi_dispose_crs(&buf);
return AE_NOT_FOUND;
}
hp_res = (acpi_hp_vendor_long *)(res->reserved);
if (res->length != HP_CCSR_LENGTH || hp_res->guid_id != HP_CCSR_TYPE) {
printk(KERN_ERR PFX "Unknown Vendor data\n");
acpi_dispose_crs(&buf);
return AE_TYPE; /* Revisit error? */
}
memcpy(&vendor_guid, hp_res->guid, sizeof(efi_guid_t));
if (efi_guidcmp(vendor_guid, HP_CCSR_GUID) != 0) {
printk(KERN_ERR PFX "Vendor GUID does not match\n");
acpi_dispose_crs(&buf);
return AE_TYPE; /* Revisit error? */
}
for (i = 0 ; i < 8 ; i++) {
*csr_base |= ((u64)(hp_res->csr_base[i]) << (i * 8));
*csr_length |= ((u64)(hp_res->csr_length[i]) << (i * 8));
}
acpi_dispose_crs(&buf);
return AE_OK;
}
static acpi_status
hpzx1_sba_probe(acpi_handle obj, u32 depth, void *context, void **ret)
{
u64 csr_base = 0, csr_length = 0;
char *name = context;
struct fake_pci_dev *dev;
acpi_status status;
status = hp_csr_space(obj, &csr_base, &csr_length);
if (status != AE_OK)
return status;
/*
* Only SBA shows up in ACPI namespace, so its CSR space
* includes both SBA and IOC. Make SBA and IOC show up
* separately in PCI space.
*/
if ((dev = hpzx1_fake_pci_dev(csr_base, 0, 0x1000)))
printk(KERN_INFO PFX "%s SBA at 0x%lx; pci dev %02x:%02x.%d\n",
name, csr_base, dev->bus,
PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
if ((dev = hpzx1_fake_pci_dev(csr_base + 0x1000, 0, 0x1000)))
printk(KERN_INFO PFX "%s IOC at 0x%lx; pci dev %02x:%02x.%d\n",
name, csr_base + 0x1000, dev->bus,
PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
return AE_OK;
}
static acpi_status
hpzx1_lba_probe(acpi_handle obj, u32 depth, void *context, void **ret)
{
acpi_status status;
u64 csr_base = 0, csr_length = 0;
char *name = context;
NATIVE_UINT busnum = 0;
struct fake_pci_dev *dev;
status = hp_csr_space(obj, &csr_base, &csr_length);
if (status != AE_OK)
return status;
status = acpi_cf_evaluate_method(obj, METHOD_NAME__BBN, &busnum);
if (ACPI_FAILURE(status)) {
printk(KERN_ERR PFX "evaluate _BBN fail=0x%x\n", status);
busnum = 0; // no _BBN; stick it on bus 0
}
if ((dev = hpzx1_fake_pci_dev(csr_base, busnum, csr_length)))
printk(KERN_INFO PFX "%s LBA at 0x%lx, _BBN 0x%02x; "
"pci dev %02x:%02x.%d\n",
name, csr_base, busnum, dev->bus,
PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
return AE_OK;
}
static void
hpzx1_acpi_dev_init(void)
{
extern struct pci_ops pci_conf;
/*
* Make fake PCI devices for the following hardware in the
* ACPI namespace. This makes it more convenient for drivers
* because they can claim these devices based on PCI
* information, rather than needing to know about ACPI. The
* 64-bit "HPA" space for this hardware is available as BAR
* 0/1.
*
* HWP0001: Single IOC SBA w/o IOC in namespace
* HWP0002: LBA device
* HWP0003: AGP LBA device
*/
acpi_get_devices("HWP0001", hpzx1_sba_probe, "HWP0001", NULL);
#ifdef CONFIG_IA64_HP_PROTO
if (fake_pci_tail != &fake_pci_head) {
#endif
acpi_get_devices("HWP0002", hpzx1_lba_probe, "HWP0002", NULL);
acpi_get_devices("HWP0003", hpzx1_lba_probe, "HWP0003", NULL);
#ifdef CONFIG_IA64_HP_PROTO
}
#define ZX1_FUNC_ID_VALUE (PCI_DEVICE_ID_HP_ZX1_SBA << 16) | PCI_VENDOR_ID_HP
/*
* Early protos don't have bridges in the ACPI namespace, so
* if we didn't find anything, add the things we know are
* there.
*/
if (fake_pci_tail == &fake_pci_head) {
u64 hpa, csr_base;
struct fake_pci_dev *dev;
csr_base = 0xfed00000UL;
hpa = (u64) ioremap(csr_base, 0x1000);
if (__raw_readl(hpa) == ZX1_FUNC_ID_VALUE) {
if ((dev = hpzx1_fake_pci_dev(csr_base, 0, 0x1000)))
printk(KERN_INFO PFX "HWP0001 SBA at 0x%lx; "
"pci dev %02x:%02x.%d\n", csr_base,
dev->bus, PCI_SLOT(dev->devfn),
PCI_FUNC(dev->devfn));
if ((dev = hpzx1_fake_pci_dev(csr_base + 0x1000, 0,
0x1000)))
printk(KERN_INFO PFX "HWP0001 IOC at 0x%lx; "
"pci dev %02x:%02x.%d\n",
csr_base + 0x1000,
dev->bus, PCI_SLOT(dev->devfn),
PCI_FUNC(dev->devfn));
csr_base = 0xfed24000UL;
iounmap(hpa);
hpa = (u64) ioremap(csr_base, 0x1000);
if ((dev = hpzx1_fake_pci_dev(csr_base, 0x40, 0x1000)))
printk(KERN_INFO PFX "HWP0003 AGP LBA at "
"0x%lx; pci dev %02x:%02x.%d\n",
csr_base,
dev->bus, PCI_SLOT(dev->devfn),
PCI_FUNC(dev->devfn));
}
iounmap(hpa);
}
#endif
if (fake_pci_tail == &fake_pci_head)
return;
/*
* Replace PCI ops, but only if we made fake devices.
*/
orig_pci_ops = pci_conf;
pci_conf = hp_pci_conf;
}
extern void sba_init(void);
void
hpzx1_pci_fixup (int phase)
{
if (phase == 0)
hpzx1_acpi_dev_init();
iosapic_pci_fixup(phase);
if (phase == 1)
sba_init();
}
/*
* Misc. support for HP zx1 chipset support
*
* Copyright (C) 2002 Hewlett-Packard Co
* Copyright (C) 2002 Alex Williamson <alex_williamson@hp.com>
* Copyright (C) 2002 Bjorn Helgaas <bjorn_helgaas@hp.com>
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/acpi.h>
#include <asm/iosapic.h>
#include <asm/efi.h>
#include "../drivers/acpi/include/platform/acgcc.h"
#include "../drivers/acpi/include/actypes.h"
#include "../drivers/acpi/include/acexcep.h"
#include "../drivers/acpi/include/acpixf.h"
#include "../drivers/acpi/include/actbl.h"
#include "../drivers/acpi/include/acconfig.h"
#include "../drivers/acpi/include/acmacros.h"
#include "../drivers/acpi/include/aclocal.h"
#include "../drivers/acpi/include/acobject.h"
#include "../drivers/acpi/include/acstruct.h"
#include "../drivers/acpi/include/acnamesp.h"
#include "../drivers/acpi/include/acutils.h"
#define PFX "hpzx1: "
struct fake_pci_dev {
struct fake_pci_dev *next;
unsigned char bus;
unsigned int devfn;
int sizing; // in middle of BAR sizing operation?
unsigned long csr_base;
unsigned int csr_size;
unsigned long mapped_csrs; // ioremapped
};
static struct fake_pci_dev *fake_pci_head, **fake_pci_tail = &fake_pci_head;
static struct pci_ops orig_pci_ops;
static inline struct fake_pci_dev *
fake_pci_find_slot(unsigned char bus, unsigned int devfn)
{
struct fake_pci_dev *dev;
for (dev = fake_pci_head; dev; dev = dev->next)
if (dev->bus == bus && dev->devfn == devfn)
return dev;
return NULL;
}
static struct fake_pci_dev *
alloc_fake_pci_dev(void)
{
struct fake_pci_dev *dev;
dev = kmalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return NULL;
memset(dev, 0, sizeof(*dev));
*fake_pci_tail = dev;
fake_pci_tail = &dev->next;
return dev;
}
#define HP_CFG_RD(sz, bits, name) \
static int hp_cfg_read##sz (struct pci_dev *dev, int where, u##bits *value) \
{ \
struct fake_pci_dev *fake_dev; \
if (!(fake_dev = fake_pci_find_slot(dev->bus->number, dev->devfn))) \
return orig_pci_ops.name(dev, where, value); \
\
switch (where) { \
case PCI_COMMAND: \
*value = read##sz(fake_dev->mapped_csrs + where); \
*value |= PCI_COMMAND_MEMORY; /* SBA omits this */ \
break; \
case PCI_BASE_ADDRESS_0: \
if (fake_dev->sizing) \
*value = ~(fake_dev->csr_size - 1); \
else \
*value = (fake_dev->csr_base & \
PCI_BASE_ADDRESS_MEM_MASK) | \
PCI_BASE_ADDRESS_SPACE_MEMORY; \
fake_dev->sizing = 0; \
break; \
default: \
*value = read##sz(fake_dev->mapped_csrs + where); \
break; \
} \
return PCIBIOS_SUCCESSFUL; \
}
#define HP_CFG_WR(sz, bits, name) \
static int hp_cfg_write##sz (struct pci_dev *dev, int where, u##bits value) \
{ \
struct fake_pci_dev *fake_dev; \
if (!(fake_dev = fake_pci_find_slot(dev->bus->number, dev->devfn))) \
return orig_pci_ops.name(dev, where, value); \
\
switch (where) { \
case PCI_BASE_ADDRESS_0: \
if (value == ~0) \
fake_dev->sizing = 1; \
break; \
default: \
write##sz(value, fake_dev->mapped_csrs + where); \
break; \
} \
return PCIBIOS_SUCCESSFUL; \
}
HP_CFG_RD(b, 8, read_byte)
HP_CFG_RD(w, 16, read_word)
HP_CFG_RD(l, 32, read_dword)
HP_CFG_WR(b, 8, write_byte)
HP_CFG_WR(w, 16, write_word)
HP_CFG_WR(l, 32, write_dword)
static struct pci_ops hp_pci_conf = {
hp_cfg_readb,
hp_cfg_readw,
hp_cfg_readl,
hp_cfg_writeb,
hp_cfg_writew,
hp_cfg_writel,
};
/*
* Assume we'll never have a physical slot higher than 0x10, so we can
* use slots above that for "fake" PCI devices to represent things
* that only show up in the ACPI namespace.
*/
#define HP_MAX_SLOT 0x10
static struct fake_pci_dev *
hpzx1_fake_pci_dev(unsigned long addr, unsigned int bus, unsigned int size)
{
struct fake_pci_dev *dev;
int slot;
// Note: lspci thinks 0x1f is invalid
for (slot = 0x1e; slot > HP_MAX_SLOT; slot--) {
if (!fake_pci_find_slot(bus, PCI_DEVFN(slot, 0)))
break;
}
if (slot == HP_MAX_SLOT) {
printk(KERN_ERR PFX
"no slot space for device (0x%p) on bus 0x%02x\n",
(void *) addr, bus);
return NULL;
}
dev = alloc_fake_pci_dev();
if (!dev) {
printk(KERN_ERR PFX
"no memory for device (0x%p) on bus 0x%02x\n",
(void *) addr, bus);
return NULL;
}
dev->bus = bus;
dev->devfn = PCI_DEVFN(slot, 0);
dev->csr_base = addr;
dev->csr_size = size;
/*
* Drivers should ioremap what they need, but we have to do
* it here, too, so PCI config accesses work.
*/
dev->mapped_csrs = (unsigned long) ioremap(dev->csr_base, dev->csr_size);
return dev;
}
typedef struct {
u8 guid_id;
u8 guid[16];
u8 csr_base[8];
u8 csr_length[8];
} acpi_hp_vendor_long;
#define HP_CCSR_LENGTH 0x21
#define HP_CCSR_TYPE 0x2
#define HP_CCSR_GUID \
((efi_guid_t) { 0x69e9adf9, 0x924f, 0xab5f, { 0xf6, 0x4a, 0x24, 0xd2, 0x01, 0x37, 0x0e, 0xad }})
extern acpi_status acpi_get_crs(acpi_handle, acpi_buffer *);
extern acpi_resource *acpi_get_crs_next(acpi_buffer *, int *);
extern acpi_resource_data *acpi_get_crs_type(acpi_buffer *, int *, int);
extern void acpi_dispose_crs(acpi_buffer *);
extern acpi_status acpi_cf_evaluate_method(acpi_handle, UINT8 *, NATIVE_UINT *);
static acpi_status
hp_csr_space(acpi_handle obj, u64 *csr_base, u64 *csr_length)
{
int i, offset = 0;
acpi_status status;
acpi_buffer buf;
acpi_resource_vendor *res;
acpi_hp_vendor_long *hp_res;
efi_guid_t vendor_guid;
*csr_base = 0;
*csr_length = 0;
status = acpi_get_crs(obj, &buf);
if (status != AE_OK) {
printk(KERN_ERR PFX "Unable to get _CRS data on object\n");
return status;
}
res = (acpi_resource_vendor *)acpi_get_crs_type(&buf, &offset, ACPI_RSTYPE_VENDOR);
if (!res) {
printk(KERN_ERR PFX "Failed to find config space for device\n");
acpi_dispose_crs(&buf);
return AE_NOT_FOUND;
}
hp_res = (acpi_hp_vendor_long *)(res->reserved);
if (res->length != HP_CCSR_LENGTH || hp_res->guid_id != HP_CCSR_TYPE) {
printk(KERN_ERR PFX "Unknown Vendor data\n");
acpi_dispose_crs(&buf);
return AE_TYPE; /* Revisit error? */
}
memcpy(&vendor_guid, hp_res->guid, sizeof(efi_guid_t));
if (efi_guidcmp(vendor_guid, HP_CCSR_GUID) != 0) {
printk(KERN_ERR PFX "Vendor GUID does not match\n");
acpi_dispose_crs(&buf);
return AE_TYPE; /* Revisit error? */
}
for (i = 0 ; i < 8 ; i++) {
*csr_base |= ((u64)(hp_res->csr_base[i]) << (i * 8));
*csr_length |= ((u64)(hp_res->csr_length[i]) << (i * 8));
}
acpi_dispose_crs(&buf);
return AE_OK;
}
static acpi_status
hpzx1_sba_probe(acpi_handle obj, u32 depth, void *context, void **ret)
{
u64 csr_base = 0, csr_length = 0;
char *name = context;
struct fake_pci_dev *dev;
acpi_status status;
status = hp_csr_space(obj, &csr_base, &csr_length);
if (status != AE_OK)
return status;
/*
* Only SBA shows up in ACPI namespace, so its CSR space
* includes both SBA and IOC. Make SBA and IOC show up
* separately in PCI space.
*/
if ((dev = hpzx1_fake_pci_dev(csr_base, 0, 0x1000)))
printk(KERN_INFO PFX "%s SBA at 0x%lx; pci dev %02x:%02x.%d\n",
name, csr_base, dev->bus,
PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
if ((dev = hpzx1_fake_pci_dev(csr_base + 0x1000, 0, 0x1000)))
printk(KERN_INFO PFX "%s IOC at 0x%lx; pci dev %02x:%02x.%d\n",
name, csr_base + 0x1000, dev->bus,
PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
return AE_OK;
}
static acpi_status
hpzx1_lba_probe(acpi_handle obj, u32 depth, void *context, void **ret)
{
acpi_status status;
u64 csr_base = 0, csr_length = 0;
char *name = context;
NATIVE_UINT busnum = 0;
struct fake_pci_dev *dev;
status = hp_csr_space(obj, &csr_base, &csr_length);
if (status != AE_OK)
return status;
status = acpi_cf_evaluate_method(obj, METHOD_NAME__BBN, &busnum);
if (ACPI_FAILURE(status)) {
printk(KERN_ERR PFX "evaluate _BBN fail=0x%x\n", status);
busnum = 0; // no _BBN; stick it on bus 0
}
if ((dev = hpzx1_fake_pci_dev(csr_base, busnum, csr_length)))
printk(KERN_INFO PFX "%s LBA at 0x%lx, _BBN 0x%02x; "
"pci dev %02x:%02x.%d\n",
name, csr_base, busnum, dev->bus,
PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
return AE_OK;
}
static void
hpzx1_acpi_dev_init(void)
{
extern struct pci_ops pci_conf;
/*
* Make fake PCI devices for the following hardware in the
* ACPI namespace. This makes it more convenient for drivers
* because they can claim these devices based on PCI
* information, rather than needing to know about ACPI. The
* 64-bit "HPA" space for this hardware is available as BAR
* 0/1.
*
* HWP0001: Single IOC SBA w/o IOC in namespace
* HWP0002: LBA device
* HWP0003: AGP LBA device
*/
acpi_get_devices("HWP0001", hpzx1_sba_probe, "HWP0001", NULL);
#ifdef CONFIG_IA64_HP_PROTO
if (fake_pci_tail != &fake_pci_head) {
#endif
acpi_get_devices("HWP0002", hpzx1_lba_probe, "HWP0002", NULL);
acpi_get_devices("HWP0003", hpzx1_lba_probe, "HWP0003", NULL);
#ifdef CONFIG_IA64_HP_PROTO
}
#define ZX1_FUNC_ID_VALUE (PCI_DEVICE_ID_HP_ZX1_SBA << 16) | PCI_VENDOR_ID_HP
/*
* Early protos don't have bridges in the ACPI namespace, so
* if we didn't find anything, add the things we know are
* there.
*/
if (fake_pci_tail == &fake_pci_head) {
u64 hpa, csr_base;
struct fake_pci_dev *dev;
csr_base = 0xfed00000UL;
hpa = (u64) ioremap(csr_base, 0x1000);
if (__raw_readl(hpa) == ZX1_FUNC_ID_VALUE) {
if ((dev = hpzx1_fake_pci_dev(csr_base, 0, 0x1000)))
printk(KERN_INFO PFX "HWP0001 SBA at 0x%lx; "
"pci dev %02x:%02x.%d\n", csr_base,
dev->bus, PCI_SLOT(dev->devfn),
PCI_FUNC(dev->devfn));
if ((dev = hpzx1_fake_pci_dev(csr_base + 0x1000, 0,
0x1000)))
printk(KERN_INFO PFX "HWP0001 IOC at 0x%lx; "
"pci dev %02x:%02x.%d\n",
csr_base + 0x1000,
dev->bus, PCI_SLOT(dev->devfn),
PCI_FUNC(dev->devfn));
csr_base = 0xfed24000UL;
iounmap(hpa);
hpa = (u64) ioremap(csr_base, 0x1000);
if ((dev = hpzx1_fake_pci_dev(csr_base, 0x40, 0x1000)))
printk(KERN_INFO PFX "HWP0003 AGP LBA at "
"0x%lx; pci dev %02x:%02x.%d\n",
csr_base,
dev->bus, PCI_SLOT(dev->devfn),
PCI_FUNC(dev->devfn));
}
iounmap(hpa);
}
#endif
if (fake_pci_tail == &fake_pci_head)
return;
/*
* Replace PCI ops, but only if we made fake devices.
*/
orig_pci_ops = pci_conf;
pci_conf = hp_pci_conf;
}
extern void sba_init(void);
void
hpzx1_pci_fixup (int phase)
{
if (phase == 0)
hpzx1_acpi_dev_init();
iosapic_pci_fixup(phase);
if (phase == 1)
sba_init();
}
arch/ia64/ia32/binfmt_elf32.c
View file @ 3f4533c3
......@@ -47,6 +47,8 @@ static void elf32_set_personality (void);
#define ELF_PLAT_INIT(_r) ia64_elf32_init(_r)
#define setup_arg_pages(bprm) ia32_setup_arg_pages(bprm)
#define elf_map elf32_map
#undef SET_PERSONALITY
#define SET_PERSONALITY(ex, ibcs2) elf32_set_personality()
/* Ugly but avoids duplication */
......
arch/ia64/ia32/sys_ia32.c
View file @ 3f4533c3
......@@ -3003,7 +3003,7 @@ sys32_ptrace (int request, pid_t pid, unsigned int addr, unsigned int data,
if (request != PTRACE_KILL)
goto out;
}
if (child->p_pptr != current)
if (child->parent != current)
goto out;
switch (request) {
......
arch/ia64/kernel/Makefile
View file @ 3f4533c3
......@@ -17,6 +17,7 @@ obj-y := acpi.o entry.o gate.o efi.o efi_stub.o ia64_ksyms.o irq.o irq_ia64.o ir
machvec.o pal.o process.o perfmon.o ptrace.o sal.o semaphore.o setup.o \
signal.o sys_ia64.o traps.o time.o unaligned.o unwind.o
obj-$(CONFIG_IA64_GENERIC) += iosapic.o
obj-$(CONFIG_IA64_HP_ZX1) += iosapic.o
obj-$(CONFIG_IA64_DIG) += iosapic.o
obj-$(CONFIG_IA64_PALINFO) += palinfo.o
obj-$(CONFIG_EFI_VARS) += efivars.o
......
arch/ia64/kernel/acpi.c
View file @ 3f4533c3
/*
* Advanced Configuration and Power Interface
* acpi.c - Architecture-Specific Low-Level ACPI Support
*
* Based on 'ACPI Specification 1.0b' February 2, 1999 and
* 'IA-64 Extensions to ACPI Specification' Revision 0.6
* Copyright (C) 1999 VA Linux Systems
* Copyright (C) 1999,2000 Walt Drummond <drummond@valinux.com>
* Copyright (C) 2000 Hewlett-Packard Co.
* Copyright (C) 2000 David Mosberger-Tang <davidm@hpl.hp.com>
* Copyright (C) 2000 Intel Corp.
* Copyright (C) 2000,2001 J.I. Lee <jung-ik.lee@intel.com>
* Copyright (C) 2001 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
*
* Copyright (C) 1999 VA Linux Systems
* Copyright (C) 1999, 2000 Walt Drummond <drummond@valinux.com>
* Copyright (C) 2000, 2002 Hewlett-Packard Co.
* David Mosberger-Tang <davidm@hpl.hp.com>
* Copyright (C) 2000 Intel Corp.
* Copyright (C) 2000, 2001 J.I. Lee <jung-ik.lee@intel.com>
* ACPI based kernel configuration manager.
* ACPI 2.0 & IA64 ext 0.71
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
......@@ -23,31 +36,16 @@
#include <linux/string.h>
#include <linux/types.h>
#include <linux/irq.h>
#ifdef CONFIG_SERIAL_ACPI
#include <linux/acpi_serial.h>
#endif
#include <asm/acpi-ext.h>
#include <asm/acpikcfg.h>
#include <linux/acpi.h>
#include <asm/efi.h>
#include <asm/io.h>
#include <asm/iosapic.h>
#include <asm/machvec.h>
#include <asm/page.h>
#include <asm/system.h>
#undef ACPI_DEBUG /* Guess what this does? */
/* global array to record platform interrupt vectors for generic int routing */
int platform_irq_list[ACPI_MAX_PLATFORM_IRQS];
/* These are ugly but will be reclaimed by the kernel */
int __initdata available_cpus;
int __initdata total_cpus;
int __initdata pcat_compat;
void (*pm_idle) (void);
void (*pm_power_off) (void);
#define PREFIX "ACPI: "
asm (".weak iosapic_register_irq");
asm (".weak iosapic_register_legacy_irq");
......@@ -55,10 +53,16 @@ asm (".weak iosapic_register_platform_irq");
asm (".weak iosapic_init");
asm (".weak iosapic_version");
void (*pm_idle) (void);
void (*pm_power_off) (void);
/*
* TBD: Should go away once we have an ACPI parser.
*/
const char *
acpi_get_sysname (void)
{
/* the following should go away once we have an ACPI parser: */
#ifdef CONFIG_IA64_GENERIC
return "hpsim";
#else
......@@ -74,16 +78,21 @@ acpi_get_sysname (void)
# error Unknown platform. Fix acpi.c.
# endif
#endif
}
#ifdef CONFIG_ACPI_BOOT
#define ACPI_MAX_PLATFORM_IRQS 256
/* Array to record platform interrupt vectors for generic interrupt routing. */
int platform_irq_list[ACPI_MAX_PLATFORM_IRQS];
/*
* Interrupt routing API for device drivers.
* Provides the interrupt vector for a generic platform event
* (currently only CPEI implemented)
* Interrupt routing API for device drivers. Provides interrupt vector for
* a generic platform event. Currently only CPEI is implemented.
*/
int
acpi_request_vector(u32 int_type)
acpi_request_vector (u32 int_type)
{
int vector = -1;
......@@ -96,586 +105,494 @@ acpi_request_vector(u32 int_type)
return vector;
}
/*
* Configure legacy IRQ information.
*/
static void __init
acpi_legacy_irq (char *p)
{
acpi_entry_int_override_t *legacy = (acpi_entry_int_override_t *) p;
unsigned long polarity = 0, edge_triggered = 0;
/*
* If the platform we're running doesn't define
* iosapic_register_legacy_irq(), we ignore this info...
*/
if (!iosapic_register_legacy_irq)
return;
switch (legacy->flags) {
case 0x5: polarity = 1; edge_triggered = 1; break;
case 0x7: polarity = 0; edge_triggered = 1; break;
case 0xd: polarity = 1; edge_triggered = 0; break;
case 0xf: polarity = 0; edge_triggered = 0; break;
default:
printk(" ACPI Legacy IRQ 0x%02x: Unknown flags 0x%x\n", legacy->isa_irq,
legacy->flags);
break;
}
iosapic_register_legacy_irq(legacy->isa_irq, legacy->pin, polarity, edge_triggered);
}
/* --------------------------------------------------------------------------
Boot-time Table Parsing
-------------------------------------------------------------------------- */
static int total_cpus __initdata;
static int available_cpus __initdata;
struct acpi_table_madt * acpi_madt __initdata;
/*
* ACPI 2.0 tables parsing functions
*/
static unsigned long
readl_unaligned(void *p)
static int __init
acpi_parse_lapic_addr_ovr (acpi_table_entry_header *header)
{
unsigned long ret;
struct acpi_table_lapic_addr_ovr *lapic = NULL;
lapic = (struct acpi_table_lapic_addr_ovr *) header;
if (!lapic)
return -EINVAL;
acpi_table_print_madt_entry(header);
if (lapic->address) {
iounmap((void *) ipi_base_addr);
ipi_base_addr = (unsigned long) ioremap(lapic->address, 0);
}
memcpy(&ret, p, sizeof(long));
return ret;
return 0;
}
/*
* Identify usable CPU's and remember them for SMP bringup later.
*/
static void __init
acpi20_lsapic (char *p)
static int __init
acpi_parse_lsapic (acpi_table_entry_header *header)
{
int add = 1;
struct acpi_table_lsapic *lsapic = NULL;
acpi20_entry_lsapic_t *lsapic = (acpi20_entry_lsapic_t *) p;
printk(" CPU %.04x:%.04x: ", lsapic->eid, lsapic->id);
lsapic = (struct acpi_table_lsapic *) header;
if (!lsapic)
return -EINVAL;
if ((lsapic->flags & LSAPIC_ENABLED) == 0) {
printk("disabled.\n");
add = 0;
}
acpi_table_print_madt_entry(header);
#ifdef CONFIG_SMP
smp_boot_data.cpu_phys_id[total_cpus] = -1;
#endif
if (add) {
printk("CPU %d (0x%04x)", total_cpus, (lsapic->id << 8) | lsapic->eid);
if (lsapic->flags.enabled) {
available_cpus++;
printk("available");
printk(" enabled");
#ifdef CONFIG_SMP
smp_boot_data.cpu_phys_id[total_cpus] = (lsapic->id << 8) | lsapic->eid;
if (hard_smp_processor_id() == smp_boot_data.cpu_phys_id[total_cpus])
printk(" (BSP)");
#endif
printk(".\n");
}
else {
printk(" disabled");
#ifdef CONFIG_SMP
smp_boot_data.cpu_phys_id[total_cpus] = -1;
#endif
}
printk("\n");
total_cpus++;
return 0;
}
/*
* Extract iosapic info from madt (again) to determine which iosapic
* this platform interrupt resides in
*/
static int __init
acpi_parse_lapic_nmi (acpi_table_entry_header *header)
{
struct acpi_table_lapic_nmi *lacpi_nmi = NULL;
lacpi_nmi = (struct acpi_table_lapic_nmi*) header;
if (!lacpi_nmi)
return -EINVAL;
acpi_table_print_madt_entry(header);
/* TBD: Support lapic_nmi entries */
return 0;
}
static int __init
acpi20_which_iosapic (int global_vector, acpi_madt_t *madt, u32 *irq_base, char **iosapic_address)
acpi_find_iosapic (int global_vector, u32 *irq_base, char **iosapic_address)
{
acpi_entry_iosapic_t *iosapic;
char *p, *end;
int ver, max_pin;
struct acpi_table_iosapic *iosapic = NULL;
int ver = 0;
int max_pin = 0;
char *p = 0;
char *end = 0;
if (!irq_base || !iosapic_address)
return -ENODEV;
p = (char *) (madt + 1);
end = p + (madt->header.length - sizeof(acpi_madt_t));
p = (char *) (acpi_madt + 1);
end = p + (acpi_madt->header.length - sizeof(struct acpi_table_madt));
while (p < end) {
switch (*p) {
case ACPI20_ENTRY_IO_SAPIC:
/* collect IOSAPIC info for platform int use later */
iosapic = (acpi_entry_iosapic_t *)p;
*irq_base = iosapic->irq_base;
if (*p == ACPI_MADT_IOSAPIC) {
iosapic = (struct acpi_table_iosapic *) p;
*irq_base = iosapic->global_irq_base;
*iosapic_address = ioremap(iosapic->address, 0);
/* is this the iosapic we're looking for? */
ver = iosapic_version(*iosapic_address);
max_pin = (ver >> 16) & 0xff;
if ((global_vector - *irq_base) <= max_pin)
return 0; /* found it! */
break;
default:
break;
return 0; /* Found it! */
}
p += p[1];
}
return 1;
return -ENODEV;
}
/*
* Info on platform interrupt sources: NMI, PMI, INIT, etc.
*/
static void __init
acpi20_platform (char *p, acpi_madt_t *madt)
static int __init
acpi_parse_iosapic (acpi_table_entry_header *header)
{
int vector;
u32 irq_base;
char *iosapic_address;
unsigned long polarity = 0, trigger = 0;
acpi20_entry_platform_src_t *plat = (acpi20_entry_platform_src_t *) p;
struct acpi_table_iosapic *iosapic;
printk("PLATFORM: IOSAPIC %x -> Vector %x on CPU %.04u:%.04u\n",
plat->iosapic_vector, plat->global_vector, plat->eid, plat->id);
iosapic = (struct acpi_table_iosapic *) header;
if (!iosapic)
return -EINVAL;
/* record platform interrupt vectors for generic int routing code */
acpi_table_print_madt_entry(header);
if (!iosapic_register_platform_irq) {
printk("acpi20_platform(): no ACPI platform IRQ support\n");
return;
if (iosapic_init) {
#ifndef CONFIG_ITANIUM
/* PCAT_COMPAT flag indicates dual-8259 setup */
iosapic_init(iosapic->address, iosapic->global_irq_base,
acpi_madt->flags.pcat_compat);
#else
/* Firmware on old Itanium systems is broken */
iosapic_init(iosapic->address, iosapic->global_irq_base, 1);
#endif
}
return 0;
}
static int __init
acpi_parse_plat_int_src (acpi_table_entry_header *header)
{
struct acpi_table_plat_int_src *plintsrc = NULL;
int vector = 0;
u32 irq_base = 0;
char *iosapic_address = NULL;
plintsrc = (struct acpi_table_plat_int_src *) header;
if (!plintsrc)
return -EINVAL;
/* extract polarity and trigger info from flags */
switch (plat->flags) {
case 0x5: polarity = 1; trigger = 1; break;
case 0x7: polarity = 0; trigger = 1; break;
case 0xd: polarity = 1; trigger = 0; break;
case 0xf: polarity = 0; trigger = 0; break;
default:
printk("acpi20_platform(): unknown flags 0x%x\n", plat->flags);
break;
acpi_table_print_madt_entry(header);
if (!iosapic_register_platform_irq) {
printk(KERN_WARNING PREFIX "No ACPI platform IRQ support\n");
return -ENODEV;
}
/* which iosapic does this IRQ belong to? */
if (acpi20_which_iosapic(plat->global_vector, madt, &irq_base, &iosapic_address)) {
printk("acpi20_platform(): I/O SAPIC not found!\n");
return;
if (0 != acpi_find_iosapic(plintsrc->global_irq, &irq_base, &iosapic_address)) {
printk(KERN_WARNING PREFIX "IOSAPIC not found\n");
return -ENODEV;
}
/*
* get vector assignment for this IRQ, set attributes, and program the IOSAPIC
* routing table
* Get vector assignment for this IRQ, set attributes, and program the
* IOSAPIC routing table.
*/
vector = iosapic_register_platform_irq(plat->int_type,
plat->global_vector,
plat->iosapic_vector,
plat->eid,
plat->id,
polarity,
trigger,
irq_base,
iosapic_address);
platform_irq_list[plat->int_type] = vector;
vector = iosapic_register_platform_irq (plintsrc->type,
plintsrc->global_irq,
plintsrc->iosapic_vector,
plintsrc->eid,
plintsrc->id,
(plintsrc->flags.polarity == 1) ? 1 : 0,
(plintsrc->flags.trigger == 1) ? 1 : 0,
irq_base,
iosapic_address);
platform_irq_list[plintsrc->type] = vector;
return 0;
}
/*
* Override the physical address of the local APIC in the MADT stable header.
*/
static void __init
acpi20_lapic_addr_override (char *p)
static int __init
acpi_parse_int_src_ovr (acpi_table_entry_header *header)
{
acpi20_entry_lapic_addr_override_t * lapic = (acpi20_entry_lapic_addr_override_t *) p;
struct acpi_table_int_src_ovr *p = NULL;
if (lapic->lapic_address) {
iounmap((void *)ipi_base_addr);
ipi_base_addr = (unsigned long) ioremap(lapic->lapic_address, 0);
p = (struct acpi_table_int_src_ovr *) header;
if (!p)
return -EINVAL;
printk("LOCAL ACPI override to 0x%lx(p=0x%lx)\n",
ipi_base_addr, lapic->lapic_address);
}
acpi_table_print_madt_entry(header);
/* Ignore if the platform doesn't support overrides */
if (!iosapic_register_legacy_irq)
return 0;
iosapic_register_legacy_irq(p->bus_irq, p->global_irq,
(p->flags.polarity == 1) ? 1 : 0,
(p->flags.trigger == 1) ? 1 : 0);
return 0;
}
/*
* Parse the ACPI Multiple APIC Description Table
*/
static void __init
acpi20_parse_madt (acpi_madt_t *madt)
static int __init
acpi_parse_nmi_src (acpi_table_entry_header *header)
{
acpi_entry_iosapic_t *iosapic = NULL;
acpi20_entry_lsapic_t *lsapic = NULL;
char *p, *end;
int i;
/* Base address of IPI Message Block */
if (madt->lapic_address) {
ipi_base_addr = (unsigned long) ioremap(madt->lapic_address, 0);
printk("Lapic address set to 0x%lx\n", ipi_base_addr);
} else
printk("Lapic address set to default 0x%lx\n", ipi_base_addr);
struct acpi_table_nmi_src *nmi_src = NULL;
/*
* The PCAT_COMPAT flag indicates that the system has a dual-8259 compatible
* setup.
*/
#ifdef CONFIG_ITANIUM
pcat_compat = 1; /* fw on some Itanium systems is broken... */
#else
pcat_compat = (madt->flags & MADT_PCAT_COMPAT);
#endif
nmi_src = (struct acpi_table_nmi_src*) header;
if (!nmi_src)
return -EINVAL;
p = (char *) (madt + 1);
end = p + (madt->header.length - sizeof(acpi_madt_t));
acpi_table_print_madt_entry(header);
/* Initialize platform interrupt vector array */
for (i = 0; i < ACPI_MAX_PLATFORM_IRQS; i++)
platform_irq_list[i] = -1;
/* TBD: Support nimsrc entries */
/*
* Split-up entry parsing to ensure ordering.
*/
while (p < end) {
switch (*p) {
case ACPI20_ENTRY_LOCAL_APIC_ADDR_OVERRIDE:
printk("ACPI 2.0 MADT: LOCAL APIC Override\n");
acpi20_lapic_addr_override(p);
break;
case ACPI20_ENTRY_LOCAL_SAPIC:
printk("ACPI 2.0 MADT: LOCAL SAPIC\n");
lsapic = (acpi20_entry_lsapic_t *) p;
acpi20_lsapic(p);
break;
case ACPI20_ENTRY_IO_SAPIC:
iosapic = (acpi_entry_iosapic_t *) p;
if (iosapic_init)
iosapic_init(iosapic->address, iosapic->irq_base, pcat_compat);
break;
case ACPI20_ENTRY_PLATFORM_INT_SOURCE:
printk("ACPI 2.0 MADT: PLATFORM INT SOURCE\n");
acpi20_platform(p, madt);
break;
case ACPI20_ENTRY_LOCAL_APIC:
printk("ACPI 2.0 MADT: LOCAL APIC entry\n"); break;
case ACPI20_ENTRY_IO_APIC:
printk("ACPI 2.0 MADT: IO APIC entry\n"); break;
case ACPI20_ENTRY_NMI_SOURCE:
printk("ACPI 2.0 MADT: NMI SOURCE entry\n"); break;
case ACPI20_ENTRY_LOCAL_APIC_NMI:
printk("ACPI 2.0 MADT: LOCAL APIC NMI entry\n"); break;
case ACPI20_ENTRY_INT_SRC_OVERRIDE:
break;
default:
printk("ACPI 2.0 MADT: unknown entry skip\n"); break;
break;
}
p += p[1];
}
return 0;
}
p = (char *) (madt + 1);
end = p + (madt->header.length - sizeof(acpi_madt_t));
while (p < end) {
switch (*p) {
case ACPI20_ENTRY_LOCAL_APIC:
if (lsapic) break;
printk("ACPI 2.0 MADT: LOCAL APIC entry\n");
/* parse local apic if there's no local Sapic */
break;
case ACPI20_ENTRY_IO_APIC:
if (iosapic) break;
printk("ACPI 2.0 MADT: IO APIC entry\n");
/* parse ioapic if there's no ioSapic */
break;
default:
break;
}
p += p[1];
}
static int __init
acpi_parse_madt (unsigned long phys_addr, unsigned long size)
{
int i = 0;
p = (char *) (madt + 1);
end = p + (madt->header.length - sizeof(acpi_madt_t));
if (!phys_addr || !size)
return -EINVAL;
while (p < end) {
switch (*p) {
case ACPI20_ENTRY_INT_SRC_OVERRIDE:
printk("ACPI 2.0 MADT: INT SOURCE Override\n");
acpi_legacy_irq(p);
break;
default:
break;
}
p += p[1];
acpi_madt = (struct acpi_table_madt *) __va(phys_addr);
if (!acpi_madt) {
printk(KERN_WARNING PREFIX "Unable to map MADT\n");
return -ENODEV;
}
/* Make bootup pretty */
printk(" %d CPUs available, %d CPUs total\n",
available_cpus, total_cpus);
/* Initialize platform interrupt vector array */
for (i = 0; i < ACPI_MAX_PLATFORM_IRQS; i++)
platform_irq_list[i] = -1;
/* Get base address of IPI Message Block */
if (acpi_madt->lapic_address)
ipi_base_addr = (unsigned long)
ioremap(acpi_madt->lapic_address, 0);
printk(KERN_INFO PREFIX "Local APIC address 0x%lx\n", ipi_base_addr);
return 0;
}
int __init
acpi20_parse (acpi20_rsdp_t *rsdp20)
acpi_find_rsdp (unsigned long *rsdp_phys)
{
# ifdef CONFIG_ACPI
acpi_xsdt_t *xsdt;
acpi_desc_table_hdr_t *hdrp;
acpi_madt_t *madt = NULL;
int tables, i;
if (strncmp(rsdp20->signature, ACPI_RSDP_SIG, ACPI_RSDP_SIG_LEN)) {
printk("ACPI 2.0 RSDP signature incorrect!\n");
return 0;
} else {
printk("ACPI 2.0 Root System Description Ptr at 0x%lx\n",
(unsigned long)rsdp20);
}
if (!rsdp_phys)
return -EINVAL;
xsdt = __va(rsdp20->xsdt);
hdrp = &xsdt->header;
if (strncmp(hdrp->signature,
ACPI_XSDT_SIG, ACPI_XSDT_SIG_LEN)) {
printk("ACPI 2.0 XSDT signature incorrect. Trying RSDT\n");
/* RSDT parsing here */
if (efi.acpi20) {
(*rsdp_phys) = __pa(efi.acpi20);
return 0;
} else {
printk("ACPI 2.0 XSDT at 0x%lx (p=0x%lx)\n",
(unsigned long)xsdt, (unsigned long)rsdp20->xsdt);
}
else if (efi.acpi) {
printk(KERN_WARNING PREFIX "v1.0/r0.71 tables no longer supported\n");
}
printk("ACPI 2.0: %.6s %.8s %d.%d\n",
hdrp->oem_id,
hdrp->oem_table_id,
hdrp->oem_revision >> 16,
hdrp->oem_revision & 0xffff);
return -ENODEV;
}
acpi_cf_init((void *)rsdp20);
tables =(hdrp->length -sizeof(acpi_desc_table_hdr_t))>>3;
#ifdef CONFIG_SERIAL_ACPI
for (i = 0; i < tables; i++) {
hdrp = (acpi_desc_table_hdr_t *) __va(readl_unaligned(&xsdt->entry_ptrs[i]));
printk(" :table %4.4s found\n", hdrp->signature);
#include <linux/acpi_serial.h>
/* Only interested int the MADT table for now ... */
if (strncmp(hdrp->signature,
ACPI_MADT_SIG, ACPI_MADT_SIG_LEN) != 0)
continue;
static int __init
acpi_parse_spcr (unsigned long phys_addr, unsigned long size)
{
acpi_ser_t *spcr = NULL;
unsigned long global_int = 0;
/* Save MADT pointer for later */
madt = (acpi_madt_t *) hdrp;
acpi20_parse_madt(madt);
}
if (!phys_addr || !size)
return -EINVAL;
if (!iosapic_register_irq)
return -ENODEV;
#ifdef CONFIG_SERIAL_ACPI
/*
* Now we're interested in other tables. We want the iosapics already
* initialized, so we do it in a separate loop.
* ACPI is able to describe serial ports that live at non-standard
* memory addresses and use non-standard interrupts, either via
* direct SAPIC mappings or via PCI interrupts. We handle interrupt
* routing for SAPIC-based (non-PCI) devices here. Interrupt routing
* for PCI devices will be handled when processing the PCI Interrupt
* Routing Table (PRT).
*/
for (i = 0; i < tables; i++) {
hdrp = (acpi_desc_table_hdr_t *) __va(readl_unaligned(&xsdt->entry_ptrs[i]));
/*
* search for SPCR and DBGP table entries so we can enable
* non-pci interrupts to IO-SAPICs.
*/
if (!strncmp(hdrp->signature, ACPI_SPCRT_SIG, ACPI_SPCRT_SIG_LEN) ||
!strncmp(hdrp->signature, ACPI_DBGPT_SIG, ACPI_DBGPT_SIG_LEN))
{
acpi_ser_t *spcr = (void *)hdrp;
unsigned long global_int;
setup_serial_acpi(hdrp);
/*
* ACPI is able to describe serial ports that live at non-standard
* memory space addresses and use SAPIC interrupts. If not also
* PCI devices, there would be no interrupt vector information for
* them. This checks for and fixes that situation.
*/
if (spcr->length < sizeof(acpi_ser_t))
/* table is not long enough for full info, thus no int */
break;
/*
* If the device is not in PCI space, but uses a SAPIC interrupt,
* we need to program the SAPIC so that serial can autoprobe for
* the IA64 interrupt vector later on. If the device is in PCI
* space, it should already be setup via the PCI vectors
*/
if (spcr->base_addr.space_id != ACPI_SERIAL_PCICONF_SPACE &&
spcr->int_type == ACPI_SERIAL_INT_SAPIC)
{
u32 irq_base;
char *iosapic_address;
int vector;
/* We have a UART in memory space with a SAPIC interrupt */
global_int = ( (spcr->global_int[3] << 24)
| (spcr->global_int[2] << 16)
| (spcr->global_int[1] << 8)
| spcr->global_int[0]);
if (!iosapic_register_irq)
continue;
/* which iosapic does this IRQ belong to? */
if (acpi20_which_iosapic(global_int, madt, &irq_base,
&iosapic_address) == 0)
{
vector = iosapic_register_irq(global_int,
1, /* active high polarity */
1, /* edge triggered */
irq_base,
iosapic_address);
}
}
}
spcr = (acpi_ser_t *) __va(phys_addr);
if (!spcr) {
printk(KERN_WARNING PREFIX "Unable to map SPCR\n");
return -ENODEV;
}
#endif
acpi_cf_terminate();
# ifdef CONFIG_SMP
if (available_cpus == 0) {
printk("ACPI: Found 0 CPUS; assuming 1\n");
available_cpus = 1; /* We've got at least one of these, no? */
setup_serial_acpi(spcr);
if (spcr->length < sizeof(acpi_ser_t))
/* Table not long enough for full info, thus no interrupt */
return -ENODEV;
if ((spcr->base_addr.space_id != ACPI_SERIAL_PCICONF_SPACE) &&
(spcr->int_type == ACPI_SERIAL_INT_SAPIC))
{
u32 irq_base = 0;
char *iosapic_address = NULL;
int vector = 0;
/* We have a UART in memory space with an SAPIC interrupt */
global_int = ( (spcr->global_int[3] << 24) |
(spcr->global_int[2] << 16) |
(spcr->global_int[1] << 8) |
(spcr->global_int[0]) );
/* Which iosapic does this IRQ belong to? */
if (0 == acpi_find_iosapic(global_int, &irq_base, &iosapic_address)) {
vector = iosapic_register_irq (global_int, 1, 1,
irq_base, iosapic_address);
}
}
smp_boot_data.cpu_count = total_cpus;
# endif
# endif /* CONFIG_ACPI */
return 1;
return 0;
}
/*
* ACPI 1.0b with 0.71 IA64 extensions functions; should be removed once all
* platforms start supporting ACPI 2.0
*/
/*
* Identify usable CPU's and remember them for SMP bringup later.
*/
static void __init
acpi_lsapic (char *p)
#endif /*CONFIG_SERIAL_ACPI*/
int __init
acpi_boot_init (char *cmdline)
{
int add = 1;
int result = 0;
/* Initialize the ACPI boot-time table parser */
result = acpi_table_init(cmdline);
if (0 != result)
return result;
acpi_entry_lsapic_t *lsapic = (acpi_entry_lsapic_t *) p;
/*
* MADT
* ----
* Parse the Multiple APIC Description Table (MADT), if exists.
* Note that this table provides platform SMP configuration
* information -- the successor to MPS tables.
*/
if ((lsapic->flags & LSAPIC_PRESENT) == 0)
return;
result = acpi_table_parse(ACPI_APIC, acpi_parse_madt);
if (1 > result)
return result;
printk(" CPU %d (%.04x:%.04x): ", total_cpus, lsapic->eid, lsapic->id);
/* Local APIC */
if ((lsapic->flags & LSAPIC_ENABLED) == 0) {
printk("Disabled.\n");
add = 0;
} else if (lsapic->flags & LSAPIC_PERFORMANCE_RESTRICTED) {
printk("Performance Restricted; ignoring.\n");
add = 0;
result = acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr);
if (0 > result) {
printk(KERN_ERR PREFIX "Error parsing LAPIC address override entry\n");
return result;
}
#ifdef CONFIG_SMP
smp_boot_data.cpu_phys_id[total_cpus] = -1;
#endif
if (add) {
printk("Available.\n");
available_cpus++;
#ifdef CONFIG_SMP
smp_boot_data.cpu_phys_id[total_cpus] = (lsapic->id << 8) | lsapic->eid;
#endif /* CONFIG_SMP */
result = acpi_table_parse_madt(ACPI_MADT_LSAPIC, acpi_parse_lsapic);
if (1 > result) {
printk(KERN_ERR PREFIX "Error parsing MADT - no LAPIC entries!\n");
return -ENODEV;
}
total_cpus++;
}
/*
* Info on platform interrupt sources: NMI. PMI, INIT, etc.
*/
static void __init
acpi_platform (char *p)
{
acpi_entry_platform_src_t *plat = (acpi_entry_platform_src_t *) p;
result = acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi);
if (0 > result) {
printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
return result;
}
printk("PLATFORM: IOSAPIC %x -> Vector %x on CPU %.04u:%.04u\n",
plat->iosapic_vector, plat->global_vector, plat->eid, plat->id);
}
/* I/O APIC */
/*
* Parse the ACPI Multiple SAPIC Table
*/
static void __init
acpi_parse_msapic (acpi_sapic_t *msapic)
{
acpi_entry_iosapic_t *iosapic;
char *p, *end;
result = acpi_table_parse_madt(ACPI_MADT_IOSAPIC, acpi_parse_iosapic);
if (1 > result) {
printk(KERN_ERR PREFIX "Error parsing MADT - no IOAPIC entries!\n");
return ((result == 0) ? -ENODEV : result);
}
/* Base address of IPI Message Block */
ipi_base_addr = (unsigned long) ioremap(msapic->interrupt_block, 0);
/* System-Level Interrupt Routing */
p = (char *) (msapic + 1);
end = p + (msapic->header.length - sizeof(acpi_sapic_t));
result = acpi_table_parse_madt(ACPI_MADT_PLAT_INT_SRC, acpi_parse_plat_int_src);
if (0 > result) {
printk(KERN_ERR PREFIX "Error parsing platform interrupt source entry\n");
return result;
}
while (p < end) {
switch (*p) {
case ACPI_ENTRY_LOCAL_SAPIC:
acpi_lsapic(p);
break;
case ACPI_ENTRY_IO_SAPIC:
iosapic = (acpi_entry_iosapic_t *) p;
if (iosapic_init)
/*
* The ACPI I/O SAPIC table doesn't have a PCAT_COMPAT
* flag like the MADT table, but we can safely assume that
* ACPI 1.0b systems have a dual-8259 setup.
*/
iosapic_init(iosapic->address, iosapic->irq_base, 1);
break;
case ACPI_ENTRY_INT_SRC_OVERRIDE:
acpi_legacy_irq(p);
break;
case ACPI_ENTRY_PLATFORM_INT_SOURCE:
acpi_platform(p);
break;
default:
break;
}
result = acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr);
if (0 > result) {
printk(KERN_ERR PREFIX "Error parsing interrupt source overrides entry\n");
return result;
}
/* Move to next table entry. */
p += p[1];
result = acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src);
if (0 > result) {
printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
return result;
}
#ifdef CONFIG_SERIAL_ACPI
/*
* TBD: Need phased approach to table parsing (only do those absolutely
* required during boot-up). Recommend expanding concept of fix-
* feature devices (LDM) to include table-based devices such as
* serial ports, EC, SMBus, etc.
*/
acpi_table_parse(ACPI_SPCR, acpi_parse_spcr);
#endif /*CONFIG_SERIAL_ACPI*/
#ifdef CONFIG_SMP
if (available_cpus == 0) {
printk("ACPI: Found 0 CPUS; assuming 1\n");
available_cpus = 1; /* We've got at least one of these, no? */
}
smp_boot_data.cpu_count = total_cpus;
#endif
/* Make boot-up look pretty */
printk("%d CPUs available, %d CPUs total\n", available_cpus, total_cpus);
/* Make bootup pretty */
printk(" %d CPUs available, %d CPUs total\n", available_cpus, total_cpus);
return 0;
}
/* --------------------------------------------------------------------------
PCI Interrupt Routing
-------------------------------------------------------------------------- */
int __init
acpi_parse (acpi_rsdp_t *rsdp)
acpi_get_prt (struct pci_vector_struct **vectors, int *count)
{
# ifdef CONFIG_ACPI
acpi_rsdt_t *rsdt;
acpi_desc_table_hdr_t *hdrp;
long tables, i;
struct pci_vector_struct *vector = NULL;
struct list_head *node = NULL;
struct acpi_prt_entry *entry = NULL;
int i = 0;
if (strncmp(rsdp->signature, ACPI_RSDP_SIG, ACPI_RSDP_SIG_LEN)) {
printk("Uh-oh, ACPI RSDP signature incorrect!\n");
return 0;
}
if (!vectors || !count)
return -EINVAL;
rsdt = __va(rsdp->rsdt);
if (strncmp(rsdt->header.signature, ACPI_RSDT_SIG, ACPI_RSDT_SIG_LEN)) {
printk("Uh-oh, ACPI RDST signature incorrect!\n");
return 0;
*vectors = NULL;
*count = 0;
if (acpi_prts.count < 0) {
printk(KERN_ERR PREFIX "No PCI IRQ routing entries\n");
return -ENODEV;
}
printk("ACPI: %.6s %.8s %d.%d\n", rsdt->header.oem_id, rsdt->header.oem_table_id,
rsdt->header.oem_revision >> 16, rsdt->header.oem_revision & 0xffff);
/* Allocate vectors */
acpi_cf_init(rsdp);
*vectors = kmalloc(sizeof(struct pci_vector_struct) * acpi_prts.count, GFP_KERNEL);
if (!(*vectors))
return -ENOMEM;
tables = (rsdt->header.length - sizeof(acpi_desc_table_hdr_t)) / 8;
for (i = 0; i < tables; i++) {
hdrp = (acpi_desc_table_hdr_t *) __va(rsdt->entry_ptrs[i]);
/* Convert PRT entries to IOSAPIC PCI vectors */
/* Only interested int the MSAPIC table for now ... */
if (strncmp(hdrp->signature, ACPI_SAPIC_SIG, ACPI_SAPIC_SIG_LEN) != 0)
continue;
vector = *vectors;
acpi_parse_msapic((acpi_sapic_t *) hdrp);
list_for_each(node, &acpi_prts.entries) {
entry = (struct acpi_prt_entry *)node;
vector[i].bus = (u16) entry->id.bus;
vector[i].pci_id = (u32) entry->id.dev << 16 | 0xffff;
vector[i].pin = (u8) entry->id.pin;
vector[i].irq = (u8) entry->source.index;
i++;
}
*count = acpi_prts.count;
return 0;
}
acpi_cf_terminate();
/* Assume IA64 always use I/O SAPIC */
# ifdef CONFIG_SMP
if (available_cpus == 0) {
printk("ACPI: Found 0 CPUS; assuming 1\n");
available_cpus = 1; /* We've got at least one of these, no? */
}
smp_boot_data.cpu_count = total_cpus;
# endif
# endif /* CONFIG_ACPI */
return 1;
int __init
acpi_get_interrupt_model (int *type)
{
if (!type)
return -EINVAL;
*type = ACPI_INT_MODEL_IOSAPIC;
return 0;
}
#endif /* CONFIG_ACPI_BOOT */
arch/ia64/kernel/brl_emu.c
View file @ 3f4533c3
......@@ -55,7 +55,7 @@ struct illegal_op_return
ia64_emulate_brl (struct pt_regs *regs, unsigned long ar_ec)
{
unsigned long bundle[2];
unsigned long opcode, btype, qp, offset;
unsigned long opcode, btype, qp, offset, cpl;
unsigned long next_ip;
struct siginfo siginfo;
struct illegal_op_return rv;
......@@ -158,9 +158,9 @@ ia64_emulate_brl (struct pt_regs *regs, unsigned long ar_ec)
* AR[PFS].pec = AR[EC]
* AR[PFS].ppl = PSR.cpl
*/
cpl = ia64_psr(regs)->cpl;
regs->ar_pfs = ((regs->cr_ifs & 0x3fffffffff)
| (ar_ec << 52)
| ((unsigned long) ia64_psr(regs)->cpl << 62));
| (ar_ec << 52) | (cpl << 62));
/*
* CFM.sof -= CFM.sol
......
arch/ia64/kernel/efi.c
View file @ 3f4533c3
......@@ -155,10 +155,10 @@ efi_memmap_walk (efi_freemem_callback_t callback, void *arg)
case EFI_CONVENTIONAL_MEMORY:
if (!(md->attribute & EFI_MEMORY_WB))
continue;
if (md->phys_addr + (md->num_pages << 12) > mem_limit) {
if (md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) > mem_limit) {
if (md->phys_addr > mem_limit)
continue;
md->num_pages = (mem_limit - md->phys_addr) >> 12;
md->num_pages = (mem_limit - md->phys_addr) >> EFI_PAGE_SHIFT;
}
if (md->num_pages == 0) {
printk("efi_memmap_walk: ignoring empty region at 0x%lx",
......@@ -167,7 +167,7 @@ efi_memmap_walk (efi_freemem_callback_t callback, void *arg)
}
curr.start = PAGE_OFFSET + md->phys_addr;
curr.end = curr.start + (md->num_pages << 12);
curr.end = curr.start + (md->num_pages << EFI_PAGE_SHIFT);
if (!prev_valid) {
prev = curr;
......@@ -250,16 +250,17 @@ efi_map_pal_code (void)
* dedicated ITR for the PAL code.
*/
if ((vaddr & mask) == (KERNEL_START & mask)) {
printk(__FUNCTION__ ": no need to install ITR for PAL code\n");
printk("%s: no need to install ITR for PAL code\n", __FUNCTION__);
continue;
}
if (md->num_pages << 12 > IA64_GRANULE_SIZE)
if (md->num_pages << EFI_PAGE_SHIFT > IA64_GRANULE_SIZE)
panic("Woah! PAL code size bigger than a granule!");
mask = ~((1 << IA64_GRANULE_SHIFT) - 1);
printk("CPU %d: mapping PAL code [0x%lx-0x%lx) into [0x%lx-0x%lx)\n",
smp_processor_id(), md->phys_addr, md->phys_addr + (md->num_pages << 12),
smp_processor_id(), md->phys_addr,
md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT),
vaddr & mask, (vaddr & mask) + IA64_GRANULE_SIZE);
/*
......@@ -375,7 +376,8 @@ efi_init (void)
md = p;
printk("mem%02u: type=%u, attr=0x%lx, range=[0x%016lx-0x%016lx) (%luMB)\n",
i, md->type, md->attribute, md->phys_addr,
md->phys_addr + (md->num_pages<<12) - 1, md->num_pages >> 8);
md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) - 1,
md->num_pages >> (20 - EFI_PAGE_SHIFT));
}
}
#endif
......@@ -482,8 +484,50 @@ efi_get_iobase (void)
return 0;
}
u32
efi_mem_type (u64 phys_addr)
{
void *efi_map_start, *efi_map_end, *p;
efi_memory_desc_t *md;
u64 efi_desc_size;
efi_map_start = __va(ia64_boot_param->efi_memmap);
efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size;
efi_desc_size = ia64_boot_param->efi_memdesc_size;
for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) {
md = p;
if ((md->phys_addr <= phys_addr) && (phys_addr <=
(md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) - 1)))
return md->type;
}
return 0;
}
u64
efi_mem_attributes (u64 phys_addr)
{
void *efi_map_start, *efi_map_end, *p;
efi_memory_desc_t *md;
u64 efi_desc_size;
efi_map_start = __va(ia64_boot_param->efi_memmap);
efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size;
efi_desc_size = ia64_boot_param->efi_memdesc_size;
for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) {
md = p;
if ((md->phys_addr <= phys_addr) && (phys_addr <=
(md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) - 1)))
return md->attribute;
}
return 0;
}
static void __exit
efivars_exit(void)
efivars_exit (void)
{
#ifdef CONFIG_PROC_FS
remove_proc_entry(efi_dir->name, NULL);
......
arch/ia64/kernel/entry.S
View file @ 3f4533c3
......@@ -36,6 +36,7 @@
#include <asm/kregs.h>
#include <asm/offsets.h>
#include <asm/pgtable.h>
#include <asm/percpu.h>
#include <asm/processor.h>
#include <asm/thread_info.h>
#include <asm/unistd.h>
......@@ -214,62 +215,80 @@ GLOBAL_ENTRY(save_switch_stack)
.save @priunat,r17
mov r17=ar.unat // preserve caller's
.body
adds r3=80,sp
#ifdef CONFIG_ITANIUM
adds r2=16+128,sp
adds r3=16+64,sp
adds r14=SW(R4)+16,sp
;;
st8.spill [r14]=r4,16 // spill r4
lfetch.fault.excl.nt1 [r3],128
mov ar.rsc=0 // put RSE in mode: enforced lazy, little endian, pl 0
adds r2=16+128,sp
;;
lfetch.fault.excl.nt1 [r2],128
lfetch.fault.excl.nt1 [r3],128
adds r14=SW(R4)+16,sp
;;
lfetch.fault.excl [r2]
lfetch.fault.excl [r3]
adds r15=SW(R5)+16,sp
#else
add r2=16+3*128,sp
add r3=16,sp
add r14=SW(R4)+16,sp
;;
st8.spill [r14]=r4,SW(R6)-SW(R4) // spill r4 and prefetch offset 0x1c0
lfetch.fault.excl.nt1 [r3],128 // prefetch offset 0x010
;;
mov r18=ar.fpsr // preserve fpsr
mov r19=ar.rnat
add r2=SW(F2)+16,sp // r2 = &sw->f2
.mem.offset 0,0; st8.spill [r14]=r4,16 // spill r4
.mem.offset 8,0; st8.spill [r15]=r5,16 // spill r5
add r3=SW(F3)+16,sp // r3 = &sw->f3
lfetch.fault.excl.nt1 [r3],128 // prefetch offset 0x090
lfetch.fault.excl.nt1 [r2],128 // prefetch offset 0x190
;;
lfetch.fault.excl.nt1 [r3] // prefetch offset 0x110
lfetch.fault.excl.nt1 [r2] // prefetch offset 0x210
adds r15=SW(R5)+16,sp
#endif
;;
st8.spill [r15]=r5,SW(R7)-SW(R5) // spill r5
mov.m ar.rsc=0 // put RSE in mode: enforced lazy, little endian, pl 0
add r2=SW(F2)+16,sp // r2 = &sw->f2
;;
st8.spill [r14]=r6,SW(B0)-SW(R6) // spill r6
mov.m r18=ar.fpsr // preserve fpsr
add r3=SW(F3)+16,sp // r3 = &sw->f3
;;
stf.spill [r2]=f2,32
stf.spill [r3]=f3,32
mov.m r19=ar.rnat
mov r21=b0
.mem.offset 0,0; st8.spill [r14]=r6,16 // spill r6
.mem.offset 8,0; st8.spill [r15]=r7,16 // spill r7
stf.spill [r3]=f3,32
st8.spill [r15]=r7,SW(B2)-SW(R7) // spill r7
mov r22=b1
;;
// since we're done with the spills, read and save ar.unat:
mov r29=ar.unat // M-unit
mov r20=ar.bspstore // M-unit
mov.m r29=ar.unat
mov.m r20=ar.bspstore
mov r23=b2
stf.spill [r2]=f4,32
stf.spill [r3]=f5,32
mov r24=b3
;;
st8 [r14]=r21,16 // save b0
st8 [r15]=r22,16 // save b1
st8 [r14]=r21,SW(B1)-SW(B0) // save b0
st8 [r15]=r23,SW(B3)-SW(B2) // save b2
mov r25=b4
stf.spill [r2]=f10,32
stf.spill [r3]=f11,32
mov r26=b5
;;
st8 [r14]=r23,16 // save b2
st8 [r15]=r24,16 // save b3
st8 [r14]=r22,SW(B4)-SW(B1) // save b1
st8 [r15]=r24,SW(AR_PFS)-SW(B3) // save b3
mov r21=ar.lc // I-unit
stf.spill [r2]=f12,32
stf.spill [r3]=f13,32
;;
st8 [r14]=r25,16 // save b4
st8 [r15]=r26,16 // save b5
st8 [r14]=r25,SW(B5)-SW(B4) // save b4
st8 [r15]=r16,SW(AR_LC)-SW(AR_PFS) // save ar.pfs
stf.spill [r2]=f14,32
stf.spill [r3]=f15,32
;;
st8 [r14]=r16 // save ar.pfs
st8 [r15]=r21 // save ar.lc
st8 [r14]=r26 // save b5
st8 [r15]=r21 // save ar.lc
stf.spill [r2]=f16,32
stf.spill [r3]=f17,32
;;
......@@ -284,26 +303,26 @@ GLOBAL_ENTRY(save_switch_stack)
;;
stf.spill [r2]=f24,32
stf.spill [r3]=f25,32
add r14=SW(CALLER_UNAT)+16,sp
;;
stf.spill [r2]=f26,32
stf.spill [r3]=f27,32
add r15=SW(AR_FPSR)+16,sp
;;
stf.spill [r2]=f28,32
stf.spill [r3]=f29,32
st8 [r14]=r17 // save caller_unat
st8 [r15]=r18 // save fpsr
mov r21=pr
;;
stf.spill [r2]=f30,(SW(AR_UNAT)-SW(F30))
stf.spill [r3]=f31,(SW(AR_RNAT)-SW(F31))
stf.spill [r2]=f30,SW(AR_UNAT)-SW(F30)
stf.spill [r3]=f31,SW(PR)-SW(F31)
add r14=SW(CALLER_UNAT)+16,sp
;;
st8 [r2]=r29,16 // save ar.unat
st8 [r3]=r19,16 // save ar.rnat
st8 [r2]=r29,SW(AR_RNAT)-SW(AR_UNAT) // save ar.unat
st8 [r14]=r17,SW(AR_FPSR)-SW(CALLER_UNAT) // save caller_unat
mov r21=pr
;;
st8 [r2]=r19,SW(AR_BSPSTORE)-SW(AR_RNAT) // save ar.rnat
st8 [r3]=r21 // save predicate registers
;;
st8 [r2]=r20 // save ar.bspstore
st8 [r3]=r21 // save predicate registers
st8 [r2]=r20 // save ar.bspstore
st8 [r14]=r18 // save fpsr
mov ar.rsc=3 // put RSE back into eager mode, pl 0
br.cond.sptk.many b7
END(save_switch_stack)
......@@ -647,23 +666,38 @@ dont_preserve_current_frame:
/*
* To prevent leaking bits between the kernel and user-space,
* we must clear the stacked registers in the "invalid" partition here.
* Not pretty, but at least it's fast (3.34 registers/cycle).
* Architecturally, this loop could go at 4.67 registers/cycle, but that would
* oversubscribe Itanium.
* Not pretty, but at least it's fast (3.34 registers/cycle on Itanium,
* 5 registers/cycle on McKinley).
*/
# define pRecurse p6
# define pReturn p7
#ifdef CONFIG_ITANIUM
# define Nregs 10
#else
# define Nregs 14
#endif
alloc loc0=ar.pfs,2,Nregs-2,2,0
shr.u loc1=r18,9 // RNaTslots <= dirtySize / (64*8) + 1
sub r17=r17,r18 // r17 = (physStackedSize + 8) - dirtySize
;;
#if 1
.align 32 // see comment below about gas bug...
#endif
mov ar.rsc=r19 // load ar.rsc to be used for "loadrs"
shladd in0=loc1,3,r17
mov in1=0
#if 0
// gas-2.12.90 is unable to generate a stop bit after .align, which is bad,
// because alloc must be at the beginning of an insn-group.
.align 32
#else
nop 0
nop 0
nop 0
#endif
;;
// .align 32 // gas-2.11.90 is unable to generate a stop bit after .align
rse_clear_invalid:
#ifdef CONFIG_ITANIUM
// cycle 0
{ .mii
alloc loc0=ar.pfs,2,Nregs-2,2,0
......@@ -692,9 +726,31 @@ rse_clear_invalid:
mov loc7=0
(pReturn) br.ret.sptk.many b6
}
#else /* !CONFIG_ITANIUM */
alloc loc0=ar.pfs,2,Nregs-2,2,0
cmp.lt pRecurse,p0=Nregs*8,in0 // if more than Nregs regs left to clear, (re)curse
add out0=-Nregs*8,in0
add out1=1,in1 // increment recursion count
mov loc1=0
mov loc2=0
;;
mov loc3=0
mov loc4=0
mov loc9=0
mov loc5=0
mov loc6=0
(pRecurse) br.call.sptk.many b6=rse_clear_invalid
;;
mov loc7=0
mov loc8=0
cmp.ne pReturn,p0=r0,in1 // if recursion count != 0, we need to do a br.ret
mov loc10=0
mov loc11=0
(pReturn) br.ret.sptk.many b6
#endif /* !CONFIG_ITANIUM */
# undef pRecurse
# undef pReturn
;;
alloc r17=ar.pfs,0,0,0,0 // drop current register frame
;;
loadrs
......@@ -1087,7 +1143,11 @@ sys_call_table:
data8 sys_sched_get_priority_min
data8 sys_sched_rr_get_interval
data8 sys_nanosleep
#if defined(CONFIG_NFSD) || defined(CONFIG_NFSD_MODULE)
data8 sys_nfsservctl
#else
data8 sys_ni_syscall
#endif
data8 sys_prctl // 1170
data8 sys_getpagesize
data8 sys_mmap2
......@@ -1147,14 +1207,10 @@ sys_call_table:
data8 sys_removexattr
data8 sys_lremovexattr
data8 sys_fremovexattr
#if 0
data8 sys_tkill
#else
data8 ia64_ni_syscall
#endif
data8 ia64_ni_syscall // 1230
data8 ia64_ni_syscall
data8 ia64_ni_syscall
data8 sys_futex // 1230
data8 sys_sched_setaffinity
data8 sys_sched_getaffinity
data8 ia64_ni_syscall
data8 ia64_ni_syscall
data8 ia64_ni_syscall // 1235
......
arch/ia64/kernel/head.S
View file @ 3f4533c3
......@@ -560,137 +560,114 @@ GLOBAL_ENTRY(__ia64_load_fpu)
END(__ia64_load_fpu)
GLOBAL_ENTRY(__ia64_init_fpu)
alloc r2=ar.pfs,0,0,0,0
stf.spill [sp]=f0
mov f32=f0
;;
ldf.fill f33=[sp]
ldf.fill f34=[sp]
mov f35=f0
;;
ldf.fill f36=[sp]
ldf.fill f37=[sp]
mov f38=f0
;;
ldf.fill f39=[sp]
ldf.fill f40=[sp]
mov f41=f0
;;
ldf.fill f42=[sp]
ldf.fill f43=[sp]
mov f44=f0
;;
ldf.fill f45=[sp]
ldf.fill f46=[sp]
mov f47=f0
;;
ldf.fill f48=[sp]
ldf.fill f49=[sp]
mov f50=f0
;;
ldf.fill f51=[sp]
ldf.fill f52=[sp]
mov f53=f0
;;
ldf.fill f54=[sp]
ldf.fill f55=[sp]
mov f56=f0
;;
ldf.fill f57=[sp]
ldf.fill f58=[sp]
mov f59=f0
;;
ldf.fill f60=[sp]
ldf.fill f61=[sp]
mov f62=f0
;;
ldf.fill f63=[sp]
ldf.fill f64=[sp]
mov f65=f0
;;
ldf.fill f66=[sp]
ldf.fill f67=[sp]
mov f68=f0
;;
ldf.fill f69=[sp]
ldf.fill f70=[sp]
mov f71=f0
;;
ldf.fill f72=[sp]
ldf.fill f73=[sp]
mov f74=f0
;;
ldf.fill f75=[sp]
ldf.fill f76=[sp]
mov f77=f0
;;
ldf.fill f78=[sp]
ldf.fill f79=[sp]
mov f80=f0
;;
ldf.fill f81=[sp]
ldf.fill f82=[sp]
mov f83=f0
;;
ldf.fill f84=[sp]
ldf.fill f85=[sp]
mov f86=f0
;;
ldf.fill f87=[sp]
ldf.fill f88=[sp]
mov f89=f0
;;
ldf.fill f90=[sp]
ldf.fill f91=[sp]
mov f92=f0
;;
ldf.fill f93=[sp]
ldf.fill f94=[sp]
mov f95=f0
;;
ldf.fill f96=[sp]
ldf.fill f97=[sp]
mov f98=f0
;;
ldf.fill f99=[sp]
ldf.fill f100=[sp]
mov f101=f0
;;
ldf.fill f102=[sp]
ldf.fill f103=[sp]
mov f104=f0
;;
ldf.fill f105=[sp]
ldf.fill f106=[sp]
mov f107=f0
;;
ldf.fill f108=[sp]
ldf.fill f109=[sp]
mov f110=f0
;;
ldf.fill f111=[sp]
ldf.fill f112=[sp]
mov f113=f0
;;
ldf.fill f114=[sp]
ldf.fill f115=[sp]
mov f116=f0
;;
ldf.fill f117=[sp]
ldf.fill f118=[sp]
mov f119=f0
;;
ldf.fill f120=[sp]
ldf.fill f121=[sp]
mov f122=f0
;;
ldf.fill f123=[sp]
ldf.fill f124=[sp]
mov f125=f0
stf.spill [sp]=f0 // M3
mov f32=f0 // F
nop.b 0
ldfps f33,f34=[sp] // M0
ldfps f35,f36=[sp] // M1
mov f37=f0 // F
;;
ldf.fill f126=[sp]
mov f127=f0
br.ret.sptk.many rp
setf.s f38=r0 // M2
setf.s f39=r0 // M3
mov f40=f0 // F
ldfps f41,f42=[sp] // M0
ldfps f43,f44=[sp] // M1
mov f45=f0 // F
setf.s f46=r0 // M2
setf.s f47=r0 // M3
mov f48=f0 // F
ldfps f49,f50=[sp] // M0
ldfps f51,f52=[sp] // M1
mov f53=f0 // F
setf.s f54=r0 // M2
setf.s f55=r0 // M3
mov f56=f0 // F
ldfps f57,f58=[sp] // M0
ldfps f59,f60=[sp] // M1
mov f61=f0 // F
setf.s f62=r0 // M2
setf.s f63=r0 // M3
mov f64=f0 // F
ldfps f65,f66=[sp] // M0
ldfps f67,f68=[sp] // M1
mov f69=f0 // F
setf.s f70=r0 // M2
setf.s f71=r0 // M3
mov f72=f0 // F
ldfps f73,f74=[sp] // M0
ldfps f75,f76=[sp] // M1
mov f77=f0 // F
setf.s f78=r0 // M2
setf.s f79=r0 // M3
mov f80=f0 // F
ldfps f81,f82=[sp] // M0
ldfps f83,f84=[sp] // M1
mov f85=f0 // F
setf.s f86=r0 // M2
setf.s f87=r0 // M3
mov f88=f0 // F
/*
* When the instructions are cached, it would be faster to initialize
* the remaining registers with simply mov instructions (F-unit).
* This gets the time down to ~29 cycles. However, this would use up
* 33 bundles, whereas continuing with the above pattern yields
* 10 bundles and ~30 cycles.
*/
ldfps f89,f90=[sp] // M0
ldfps f91,f92=[sp] // M1
mov f93=f0 // F
setf.s f94=r0 // M2
setf.s f95=r0 // M3
mov f96=f0 // F
ldfps f97,f98=[sp] // M0
ldfps f99,f100=[sp] // M1
mov f101=f0 // F
setf.s f102=r0 // M2
setf.s f103=r0 // M3
mov f104=f0 // F
ldfps f105,f106=[sp] // M0
ldfps f107,f108=[sp] // M1
mov f109=f0 // F
setf.s f110=r0 // M2
setf.s f111=r0 // M3
mov f112=f0 // F
ldfps f113,f114=[sp] // M0
ldfps f115,f116=[sp] // M1
mov f117=f0 // F
setf.s f118=r0 // M2
setf.s f119=r0 // M3
mov f120=f0 // F
ldfps f121,f122=[sp] // M0
ldfps f123,f124=[sp] // M1
mov f125=f0 // F
setf.s f126=r0 // M2
setf.s f127=r0 // M3
br.ret.sptk.many rp // F
END(__ia64_init_fpu)
/*
......
arch/ia64/kernel/ia64_ksyms.c
View file @ 3f4533c3
......@@ -6,7 +6,11 @@
#include <linux/module.h>
#include <linux/string.h>
EXPORT_SYMBOL_NOVERS(memset);
#undef memset
extern void *memset (void *, int, size_t);
EXPORT_SYMBOL_NOVERS(memset); /* gcc generates direct calls to memset()... */
EXPORT_SYMBOL_NOVERS(__memset_generic);
EXPORT_SYMBOL_NOVERS(__bzero);
EXPORT_SYMBOL(memchr);
EXPORT_SYMBOL(memcmp);
EXPORT_SYMBOL_NOVERS(memcpy);
......@@ -67,7 +71,7 @@ EXPORT_SYMBOL(kernel_thread);
EXPORT_SYMBOL(last_cli_ip);
#endif
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
EXPORT_SYMBOL(flush_tlb_range);
......@@ -147,3 +151,10 @@ EXPORT_SYMBOL(efi);
#include <linux/proc_fs.h>
extern struct proc_dir_entry *efi_dir;
EXPORT_SYMBOL(efi_dir);
#include <asm/machvec.h>
#ifdef CONFIG_IA64_GENERIC
EXPORT_SYMBOL(ia64_mv);
#endif
EXPORT_SYMBOL(machvec_noop);
arch/ia64/kernel/iosapic.c
View file @ 3f4533c3
......@@ -22,6 +22,7 @@
* 02/01/07 E. Focht <efocht@ess.nec.de> Redirectable interrupt vectors in
* iosapic_set_affinity(), initializations for
* /proc/irq/#/smp_affinity
* 02/04/02 P. Diefenbaugh Cleaned up ACPI PCI IRQ routing.
*/
/*
* Here is what the interrupt logic between a PCI device and the CPU looks like:
......@@ -56,9 +57,8 @@
#include <linux/smp_lock.h>
#include <linux/string.h>
#include <linux/irq.h>
#include <linux/acpi.h>
#include <asm/acpi-ext.h>
#include <asm/acpikcfg.h>
#include <asm/delay.h>
#include <asm/hw_irq.h>
#include <asm/io.h>
......@@ -92,11 +92,37 @@ static struct iosapic_irq {
unsigned char trigger : 1; /* trigger mode (see iosapic.h) */
} iosapic_irq[IA64_NUM_VECTORS];
static struct iosapic {
char *addr; /* base address of IOSAPIC */
unsigned char pcat_compat; /* 8259 compatibility flag */
unsigned char base_irq; /* first irq assigned to this IOSAPIC */
unsigned short max_pin; /* max input pin supported in this IOSAPIC */
} iosapic_lists[256] __initdata;
static int num_iosapic = 0;
/*
* Find an IOSAPIC associated with an IRQ
*/
static inline int __init
find_iosapic (unsigned int irq)
{
int i;
for (i = 0; i < num_iosapic; i++) {
if ((irq - iosapic_lists[i].base_irq) < iosapic_lists[i].max_pin)
return i;
}
return -1;
}
/*
* Translate IOSAPIC irq number to the corresponding IA-64 interrupt vector. If no
* entry exists, return -1.
*/
int
static int
iosapic_irq_to_vector (int irq)
{
int vector;
......@@ -479,7 +505,7 @@ iosapic_register_platform_irq (u32 int_type, u32 global_vector,
int vector;
switch (int_type) {
case ACPI20_ENTRY_PIS_PMI:
case ACPI_INTERRUPT_PMI:
vector = iosapic_vector;
/*
* since PMI vector is alloc'd by FW(ACPI) not by kernel,
......@@ -488,15 +514,15 @@ iosapic_register_platform_irq (u32 int_type, u32 global_vector,
iosapic_reassign_vector(vector);
delivery = IOSAPIC_PMI;
break;
case ACPI20_ENTRY_PIS_CPEI:
vector = IA64_PCE_VECTOR;
delivery = IOSAPIC_LOWEST_PRIORITY;
break;
case ACPI20_ENTRY_PIS_INIT:
case ACPI_INTERRUPT_INIT:
vector = ia64_alloc_irq();
delivery = IOSAPIC_INIT;
break;
default:
case ACPI_INTERRUPT_CPEI:
vector = IA64_PCE_VECTOR;
delivery = IOSAPIC_LOWEST_PRIORITY;
break;
default:
printk("iosapic_register_platform_irq(): invalid int type\n");
return -1;
}
......@@ -542,31 +568,41 @@ iosapic_register_legacy_irq (unsigned long irq,
void __init
iosapic_init (unsigned long phys_addr, unsigned int base_irq, int pcat_compat)
{
int i, irq, max_pin, vector, pin;
int irq, max_pin, vector, pin;
unsigned int ver;
char *addr;
static int first_time = 1;
if (first_time) {
first_time = 0;
for (vector = 0; vector < IA64_NUM_VECTORS; ++vector)
iosapic_irq[vector].pin = -1; /* mark as unused */
}
if (pcat_compat) {
/*
* Fetch the PCI interrupt routing table:
* Disable the compatibility mode interrupts (8259 style), needs IN/OUT support
* enabled.
*/
acpi_cf_get_pci_vectors(&pci_irq.route, &pci_irq.num_routes);
printk("%s: Disabling PC-AT compatible 8259 interrupts\n", __FUNCTION__);
outb(0xff, 0xA1);
outb(0xff, 0x21);
}
addr = ioremap(phys_addr, 0);
ver = iosapic_version(addr);
max_pin = (ver >> 16) & 0xff;
iosapic_lists[num_iosapic].addr = addr;
iosapic_lists[num_iosapic].pcat_compat = pcat_compat;
iosapic_lists[num_iosapic].base_irq = base_irq;
iosapic_lists[num_iosapic].max_pin = max_pin;
num_iosapic++;
printk("IOSAPIC: version %x.%x, address 0x%lx, IRQs 0x%02x-0x%02x\n",
(ver & 0xf0) >> 4, (ver & 0x0f), phys_addr, base_irq, base_irq + max_pin);
if ((base_irq == 0) && pcat_compat)
if ((base_irq == 0) && pcat_compat) {
/*
* Map the legacy ISA devices into the IOSAPIC data. Some of these may
* get reprogrammed later on with data from the ACPI Interrupt Source
......@@ -590,11 +626,37 @@ iosapic_init (unsigned long phys_addr, unsigned int base_irq, int pcat_compat)
/* program the IOSAPIC routing table: */
set_rte(vector, (ia64_get_lid() >> 16) & 0xffff);
}
}
}
void __init
iosapic_init_pci_irq (void)
{
int i, index, vector, pin;
int base_irq, max_pin, pcat_compat;
unsigned int irq;
char *addr;
if (0 != acpi_get_prt(&pci_irq.route, &pci_irq.num_routes))
return;
for (i = 0; i < pci_irq.num_routes; i++) {
irq = pci_irq.route[i].irq;
if ((irq < (int)base_irq) || (irq > (int)(base_irq + max_pin)))
index = find_iosapic(irq);
if (index < 0) {
printk("PCI: IRQ %u has no IOSAPIC mapping\n", irq);
continue;
}
addr = iosapic_lists[index].addr;
base_irq = iosapic_lists[index].base_irq;
max_pin = iosapic_lists[index].max_pin;
pcat_compat = iosapic_lists[index].pcat_compat;
pin = irq - base_irq;
if ((unsigned) pin > max_pin)
/* the interrupt route is for another controller... */
continue;
......@@ -607,18 +669,13 @@ iosapic_init (unsigned long phys_addr, unsigned int base_irq, int pcat_compat)
vector = ia64_alloc_irq();
}
register_irq(irq, vector, irq - base_irq,
/* IOSAPIC_POL_LOW, IOSAPIC_LEVEL */
IOSAPIC_LOWEST_PRIORITY, 0, 0, base_irq, addr);
register_irq(irq, vector, pin, IOSAPIC_LOWEST_PRIORITY, 0, 0, base_irq, addr);
# ifdef DEBUG_IRQ_ROUTING
#ifdef DEBUG_IRQ_ROUTING
printk("PCI: (B%d,I%d,P%d) -> IOSAPIC irq 0x%02x -> vector 0x%02x\n",
pci_irq.route[i].bus, pci_irq.route[i].pci_id>>16, pci_irq.route[i].pin,
iosapic_irq[vector].base_irq + iosapic_irq[vector].pin, vector);
# endif
/* program the IOSAPIC routing table: */
set_rte(vector, (ia64_get_lid() >> 16) & 0xffff);
#endif
}
}
......@@ -631,6 +688,11 @@ iosapic_pci_fixup (int phase)
struct hw_interrupt_type *irq_type;
irq_desc_t *idesc;
if (phase == 0) {
iosapic_init_pci_irq();
return;
}
if (phase != 1)
return;
......@@ -670,10 +732,10 @@ iosapic_pci_fixup (int phase)
irq_type = &irq_type_iosapic_level;
idesc = irq_desc(vector);
if (idesc->handler != irq_type){
if (idesc->handler != irq_type) {
if (idesc->handler != &no_irq_type)
printk("iosapic_pci_fixup: changing vector 0x%02x from "
"%s to %s\n", vector,
printk("iosapic_pci_fixup: changing vector 0x%02x "
"from %s to %s\n", vector,
idesc->handler->typename,
irq_type->typename);
idesc->handler = irq_type;
......
arch/ia64/kernel/irq.c
View file @ 3f4533c3
......@@ -68,6 +68,23 @@
irq_desc_t _irq_desc[NR_IRQS] __cacheline_aligned =
{ [0 ... NR_IRQS-1] = { IRQ_DISABLED, &no_irq_type, NULL, 0, SPIN_LOCK_UNLOCKED}};
#ifdef CONFIG_IA64_GENERIC
struct irq_desc * __ia64_irq_desc (unsigned int irq)
{
return _irq_desc + irq;
}
ia64_vector __ia64_irq_to_vector (unsigned int irq)
{
return (ia64_vector) irq;
}
unsigned int __ia64_local_vector_to_irq (ia64_vector vec)
{
return (unsigned int) vec;
}
#endif
static void register_irq_proc (unsigned int irq);
/*
......
arch/ia64/kernel/ivt.S
View file @ 3f4533c3
......@@ -127,7 +127,7 @@ ENTRY(vhpt_miss)
;;
(p7) dep r17=r17,r19,(PAGE_SHIFT-3),3 // put region number bits in place
srlz.d // ensure "rsm psr.dt" has taken effect
(p6) movl r19=__pa(SWAPPER_PGD_ADDR) // region 5 is rooted at swapper_pg_dir
(p6) movl r19=__pa(swapper_pg_dir) // region 5 is rooted at swapper_pg_dir
(p6) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT
(p7) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT-3
;;
......@@ -413,7 +413,7 @@ ENTRY(nested_dtlb_miss)
;;
(p7) dep r17=r17,r19,(PAGE_SHIFT-3),3 // put region number bits in place
srlz.d
(p6) movl r19=__pa(SWAPPER_PGD_ADDR) // region 5 is rooted at swapper_pg_dir
(p6) movl r19=__pa(swapper_pg_dir) // region 5 is rooted at swapper_pg_dir
(p6) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT
(p7) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT-3
;;
......
arch/ia64/kernel/mca.c
View file @ 3f4533c3
......@@ -41,6 +41,7 @@
#include <linux/irq.h>
#include <linux/smp_lock.h>
#include <linux/bootmem.h>
#include <linux/acpi.h>
#include <asm/machvec.h>
#include <asm/page.h>
......@@ -51,7 +52,6 @@
#include <asm/irq.h>
#include <asm/hw_irq.h>
#include <asm/acpi-ext.h>
#undef MCA_PRT_XTRA_DATA
......@@ -353,7 +353,9 @@ static int
verify_guid (efi_guid_t *test, efi_guid_t *target)
{
int rc;
#ifdef IA64_MCA_DEBUG_INFO
char out[40];
#endif
if ((rc = efi_guidcmp(*test, *target))) {
IA64_MCA_DEBUG(KERN_DEBUG
......@@ -497,7 +499,7 @@ ia64_mca_init(void)
{
irq_desc_t *desc;
unsigned int irq;
int cpev = acpi_request_vector(ACPI20_ENTRY_PIS_CPEI);
int cpev = acpi_request_vector(ACPI_INTERRUPT_CPEI);
if (cpev >= 0) {
for (irq = 0; irq < NR_IRQS; ++irq)
......
arch/ia64/kernel/minstate.h
View file @ 3f4533c3
#include <linux/config.h>
#include <asm/cache.h>
#include "entry.h"
/*
......@@ -28,18 +30,19 @@
* on interrupts.
*/
#define MINSTATE_START_SAVE_MIN_VIRT \
dep r1=-1,r1,61,3; /* r1 = current (virtual) */ \
(pUser) mov ar.rsc=0; /* set enforced lazy mode, pl 0, little-endian, loadrs=0 */ \
dep r1=-1,r1,61,3; /* r1 = current (virtual) */ \
;; \
(pUser) mov.m rARRNAT=ar.rnat; \
(pUser) addl rKRBS=IA64_RBS_OFFSET,r1; /* compute base of RBS */ \
(pUser) mov rARRNAT=ar.rnat; \
(pKern) mov r1=sp; /* get sp */ \
;; \
(pUser) addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r1; /* compute base of memory stack */ \
(pUser) lfetch.fault.excl.nt1 [rKRBS]; \
(pUser) mov rARBSPSTORE=ar.bspstore; /* save ar.bspstore */ \
(pUser) addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r1; /* compute base of memory stack */ \
;; \
(pKern) addl r1=-IA64_PT_REGS_SIZE,r1; /* if in kernel mode, use sp (r12) */ \
(pUser) mov ar.bspstore=rKRBS; /* switch to kernel RBS */ \
(pKern) addl r1=-IA64_PT_REGS_SIZE,r1; /* if in kernel mode, use sp (r12) */ \
;; \
(pUser) mov r18=ar.bsp; \
(pUser) mov ar.rsc=0x3; /* set eager mode, pl 0, little-endian, loadrs=0 */ \
......@@ -125,52 +128,58 @@
;; \
SAVE_IFS; \
MINSTATE_START_SAVE_MIN \
add r17=L1_CACHE_BYTES,r1 /* really: biggest cache-line size */ \
;; \
mov r16=r1; /* initialize first base pointer */ \
adds r17=8,r1; /* initialize second base pointer */ \
st8 [r1]=rCRIPSR; /* save cr.ipsr */ \
lfetch.fault.excl.nt1 [r17],L1_CACHE_BYTES; \
add r16=16,r1; /* initialize first base pointer */ \
;; \
st8 [r16]=rCRIPSR,16; /* save cr.ipsr */ \
st8 [r17]=rCRIIP,16; /* save cr.iip */ \
lfetch.fault.excl.nt1 [r17],L1_CACHE_BYTES; \
;; \
lfetch.fault.excl.nt1 [r17]; \
adds r17=8,r1; /* initialize second base pointer */ \
(pKern) mov r18=r0; /* make sure r18 isn't NaT */ \
;; \
st8 [r17]=rCRIIP,16; /* save cr.iip */ \
st8 [r16]=rCRIFS,16; /* save cr.ifs */ \
st8 [r17]=rARUNAT,16; /* save ar.unat */ \
(pUser) sub r18=r18,rKRBS; /* r18=RSE.ndirty*8 */ \
;; \
st8 [r17]=rARUNAT,16; /* save ar.unat */ \
st8 [r16]=rARPFS,16; /* save ar.pfs */ \
shl r18=r18,16; /* compute ar.rsc to be used for "loadrs" */ \
;; \
st8 [r17]=rARRSC,16; /* save ar.rsc */ \
tbit.nz p15,p0=rCRIPSR,IA64_PSR_I_BIT \
;; /* avoid RAW on r16 & r17 */ \
(pKern) adds r16=16,r16; /* skip over ar_rnat field */ \
(pKern) adds r17=16,r17; /* skip over ar_bspstore field */ \
(pUser) st8 [r16]=rARRNAT,16; /* save ar.rnat */ \
(pKern) adds r16=16,r16; /* skip over ar_rnat field */ \
;; /* avoid RAW on r16 & r17 */ \
(pUser) st8 [r17]=rARBSPSTORE,16; /* save ar.bspstore */ \
;; \
st8 [r16]=rARPR,16; /* save predicates */ \
st8 [r17]=rB6,16; /* save b6 */ \
shl r18=r18,16; /* compute ar.rsc to be used for "loadrs" */ \
(pKern) adds r17=16,r17; /* skip over ar_bspstore field */ \
;; \
st8 [r17]=rB6,16; /* save b6 */ \
st8 [r16]=r18,16; /* save ar.rsc value for "loadrs" */ \
st8.spill [r17]=rR1,16; /* save original r1 */ \
tbit.nz p15,p0=rCRIPSR,IA64_PSR_I_BIT \
;; \
.mem.offset 8,0; st8.spill [r17]=rR1,16; /* save original r1 */ \
.mem.offset 0,0; st8.spill [r16]=r2,16; \
;; \
.mem.offset 8,0; st8.spill [r17]=r3,16; \
.mem.offset 0,0; st8.spill [r16]=r12,16; \
adds r2=IA64_PT_REGS_R16_OFFSET,r1; \
;; \
.mem.offset 0,0; st8.spill [r16]=r12,16; \
.mem.offset 8,0; st8.spill [r17]=r13,16; \
.mem.offset 8,0; st8.spill [r17]=r13,16; \
.mem.offset 0,0; st8.spill [r16]=r14,16; \
cmp.eq pNonSys,pSys=r0,r0 /* initialize pSys=0, pNonSys=1 */ \
;; \
.mem.offset 0,0; st8.spill [r16]=r14,16; \
.mem.offset 8,0; st8.spill [r17]=r15,16; \
.mem.offset 8,0; st8.spill [r17]=r15,16; \
.mem.offset 0,0; st8.spill [r16]=r8,16; \
dep r14=-1,r0,61,3; \
;; \
.mem.offset 0,0; st8.spill [r16]=r8,16; \
.mem.offset 8,0; st8.spill [r17]=r9,16; \
.mem.offset 8,0; st8.spill [r17]=r9,16; \
.mem.offset 0,0; st8.spill [r16]=r10,16; \
adds r12=-16,r1; /* switch to kernel memory stack (with 16 bytes of scratch) */ \
;; \
.mem.offset 0,0; st8.spill [r16]=r10,16; \
.mem.offset 8,0; st8.spill [r17]=r11,16; \
.mem.offset 8,0; st8.spill [r17]=r11,16; \
mov r13=IA64_KR(CURRENT); /* establish `current' */ \
;; \
EXTRA; \
......@@ -190,10 +199,12 @@
*/
#define SAVE_REST \
.mem.offset 0,0; st8.spill [r2]=r16,16; \
.mem.offset 8,0; st8.spill [r3]=r17,16; \
;; \
.mem.offset 8,0; st8.spill [r3]=r17,16; \
.mem.offset 0,0; st8.spill [r2]=r18,16; \
;; \
.mem.offset 8,0; st8.spill [r3]=r19,16; \
.mem.offset 0,0; st8.spill [r2]=r20,16; \
;; \
mov r16=ar.ccv; /* M-unit */ \
movl r18=FPSR_DEFAULT /* L-unit */ \
......@@ -201,30 +212,29 @@
mov r17=ar.fpsr; /* M-unit */ \
mov ar.fpsr=r18; /* M-unit */ \
;; \
.mem.offset 0,0; st8.spill [r2]=r20,16; \
.mem.offset 8,0; st8.spill [r3]=r21,16; \
.mem.offset 0,0; st8.spill [r2]=r22,16; \
mov r18=b0; \
;; \
.mem.offset 0,0; st8.spill [r2]=r22,16; \
.mem.offset 8,0; st8.spill [r3]=r23,16; \
.mem.offset 0,0; st8.spill [r2]=r24,16; \
mov r19=b7; \
;; \
.mem.offset 0,0; st8.spill [r2]=r24,16; \
.mem.offset 8,0; st8.spill [r3]=r25,16; \
;; \
.mem.offset 0,0; st8.spill [r2]=r26,16; \
.mem.offset 8,0; st8.spill [r3]=r27,16; \
;; \
.mem.offset 8,0; st8.spill [r3]=r27,16; \
.mem.offset 0,0; st8.spill [r2]=r28,16; \
.mem.offset 8,0; st8.spill [r3]=r29,16; \
;; \
.mem.offset 8,0; st8.spill [r3]=r29,16; \
.mem.offset 0,0; st8.spill [r2]=r30,16; \
.mem.offset 8,0; st8.spill [r3]=r31,16; \
;; \
.mem.offset 8,0; st8.spill [r3]=r31,16; \
st8 [r2]=r16,16; /* ar.ccv */ \
st8 [r3]=r17,16; /* ar.fpsr */ \
;; \
st8 [r3]=r17,16; /* ar.fpsr */ \
st8 [r2]=r18,16; /* b0 */ \
;; \
st8 [r3]=r19,16+8; /* b7 */ \
;; \
stf.spill [r2]=f6,32; \
......
arch/ia64/kernel/pci.c
View file @ 3f4533c3
......@@ -42,101 +42,183 @@
extern void ia64_mca_check_errors( void );
#endif
struct pci_fixup pcibios_fixups[1];
struct pci_ops *pci_root_ops;
int (*pci_config_read)(int seg, int bus, int dev, int fn, int reg, int len, u32 *value);
int (*pci_config_write)(int seg, int bus, int dev, int fn, int reg, int len, u32 value);
/*
* This interrupt-safe spinlock protects all accesses to PCI
* configuration space.
* Low-level SAL-based PCI configuration access functions. Note that SAL
* calls are already serialized (via sal_lock), so we don't need another
* synchronization mechanism here. Not using segment number (yet).
*/
static spinlock_t pci_lock = SPIN_LOCK_UNLOCKED;
struct pci_fixup pcibios_fixups[] = {
{ 0 }
};
#define PCI_SAL_ADDRESS(bus, dev, fn, reg) \
((u64)(bus << 16) | (u64)(dev << 11) | (u64)(fn << 8) | (u64)(reg))
/* Macro to build a PCI configuration address to be passed as a parameter to SAL. */
static int
pci_sal_read (int seg, int bus, int dev, int fn, int reg, int len, u32 *value)
{
int result = 0;
u64 data = 0;
#define PCI_CONFIG_ADDRESS(dev, where) \
(((u64) dev->bus->number << 16) | ((u64) (dev->devfn & 0xff) << 8) | (where & 0xff))
if (!value || (bus > 255) || (dev > 31) || (fn > 7) || (reg > 255))
return -EINVAL;
result = ia64_sal_pci_config_read(PCI_SAL_ADDRESS(bus, dev, fn, reg), len, &data);
*value = (u32) data;
return result;
}
static int
pci_conf_read_config_byte(struct pci_dev *dev, int where, u8 *value)
pci_sal_write (int seg, int bus, int dev, int fn, int reg, int len, u32 value)
{
s64 status;
u64 lval;
if ((bus > 255) || (dev > 31) || (fn > 7) || (reg > 255))
return -EINVAL;
status = ia64_sal_pci_config_read(PCI_CONFIG_ADDRESS(dev, where), 1, &lval);
*value = lval;
return status;
return ia64_sal_pci_config_write(PCI_SAL_ADDRESS(bus, dev, fn, reg), len, value);
}
static int
pci_conf_read_config_word(struct pci_dev *dev, int where, u16 *value)
pci_sal_read_config_byte (struct pci_dev *dev, int where, u8 *value)
{
s64 status;
u64 lval;
int result = 0;
u32 data = 0;
if (!value)
return -EINVAL;
status = ia64_sal_pci_config_read(PCI_CONFIG_ADDRESS(dev, where), 2, &lval);
*value = lval;
return status;
result = pci_sal_read(0, dev->bus->number, PCI_SLOT(dev->devfn),
PCI_FUNC(dev->devfn), where, 1, &data);
*value = (u8) data;
return result;
}
static int
pci_conf_read_config_dword(struct pci_dev *dev, int where, u32 *value)
pci_sal_read_config_word (struct pci_dev *dev, int where, u16 *value)
{
s64 status;
u64 lval;
int result = 0;
u32 data = 0;
if (!value)
return -EINVAL;
result = pci_sal_read(0, dev->bus->number, PCI_SLOT(dev->devfn),
PCI_FUNC(dev->devfn), where, 2, &data);
*value = (u16) data;
status = ia64_sal_pci_config_read(PCI_CONFIG_ADDRESS(dev, where), 4, &lval);
*value = lval;
return status;
return result;
}
static int
pci_conf_write_config_byte (struct pci_dev *dev, int where, u8 value)
pci_sal_read_config_dword (struct pci_dev *dev, int where, u32 *value)
{
return ia64_sal_pci_config_write(PCI_CONFIG_ADDRESS(dev, where), 1, value);
if (!value)
return -EINVAL;
return pci_sal_read(0, dev->bus->number, PCI_SLOT(dev->devfn),
PCI_FUNC(dev->devfn), where, 4, value);
}
static int
pci_conf_write_config_word (struct pci_dev *dev, int where, u16 value)
pci_sal_write_config_byte (struct pci_dev *dev, int where, u8 value)
{
return ia64_sal_pci_config_write(PCI_CONFIG_ADDRESS(dev, where), 2, value);
return pci_sal_write(0, dev->bus->number, PCI_SLOT(dev->devfn),
PCI_FUNC(dev->devfn), where, 1, value);
}
static int
pci_conf_write_config_dword (struct pci_dev *dev, int where, u32 value)
pci_sal_write_config_word (struct pci_dev *dev, int where, u16 value)
{
return ia64_sal_pci_config_write(PCI_CONFIG_ADDRESS(dev, where), 4, value);
return pci_sal_write(0, dev->bus->number, PCI_SLOT(dev->devfn),
PCI_FUNC(dev->devfn), where, 2, value);
}
struct pci_ops pci_conf = {
pci_conf_read_config_byte,
pci_conf_read_config_word,
pci_conf_read_config_dword,
pci_conf_write_config_byte,
pci_conf_write_config_word,
pci_conf_write_config_dword
static int
pci_sal_write_config_dword (struct pci_dev *dev, int where, u32 value)
{
return pci_sal_write(0, dev->bus->number, PCI_SLOT(dev->devfn),
PCI_FUNC(dev->devfn), where, 4, value);
}
struct pci_ops pci_sal_ops = {
pci_sal_read_config_byte,
pci_sal_read_config_word,
pci_sal_read_config_dword,
pci_sal_write_config_byte,
pci_sal_write_config_word,
pci_sal_write_config_dword
};
/*
* Initialization. Uses the SAL interface
*/
struct pci_bus *
pcibios_scan_root(int seg, int bus)
{
struct list_head *list = NULL;
struct pci_bus *pci_bus = NULL;
list_for_each(list, &pci_root_buses) {
pci_bus = pci_bus_b(list);
if (pci_bus->number == bus) {
/* Already scanned */
printk("PCI: Bus (%02x:%02x) already probed\n", seg, bus);
return pci_bus;
}
}
printk("PCI: Probing PCI hardware on bus (%02x:%02x)\n", seg, bus);
return pci_scan_bus(bus, pci_root_ops, NULL);
}
void __init
pcibios_config_init (void)
{
if (pci_root_ops)
return;
printk("PCI: Using SAL to access configuration space\n");
pci_root_ops = &pci_sal_ops;
pci_config_read = pci_sal_read;
pci_config_write = pci_sal_write;
return;
}
void __init
pcibios_init (void)
{
# define PCI_BUSES_TO_SCAN 255
int i;
int i = 0;
#ifdef CONFIG_IA64_MCA
ia64_mca_check_errors(); /* For post-failure MCA error logging */
#endif
platform_pci_fixup(0); /* phase 0 initialization (before PCI bus has been scanned) */
pcibios_config_init();
platform_pci_fixup(0); /* phase 0 fixups (before buses scanned) */
printk("PCI: Probing PCI hardware\n");
for (i = 0; i < PCI_BUSES_TO_SCAN; i++)
pci_scan_bus(i, &pci_conf, NULL);
pci_scan_bus(i, pci_root_ops, NULL);
platform_pci_fixup(1); /* phase 1 fixups (after buses scanned) */
platform_pci_fixup(1); /* phase 1 initialization (after PCI bus has been scanned) */
return;
}
......@@ -186,7 +268,12 @@ pcibios_fixup_pbus_ranges (struct pci_bus * bus, struct pbus_set_ranges_data * r
int
pcibios_enable_device (struct pci_dev *dev)
{
if (!dev)
return -EINVAL;
/* Not needed, since we enable all devices at startup. */
printk(KERN_INFO "PCI: Found IRQ %d for device %s\n", dev->irq, dev->slot_name);
return 0;
}
......@@ -233,8 +320,7 @@ pci_mmap_page_range (struct pci_dev *dev, struct vm_area_struct *vma,
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
if (remap_page_range(vma, vma->vm_start, vma->vm_pgoff << PAGE_SHIFT,
vma->vm_end - vma->vm_start,
vma->vm_page_prot))
vma->vm_end - vma->vm_start, vma->vm_page_prot))
return -EAGAIN;
return 0;
......
arch/ia64/kernel/process.c
View file @ 3f4533c3
......@@ -24,7 +24,7 @@
#include <asm/efi.h>
#include <asm/elf.h>
#include <asm/perfmon.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/processor.h>
#include <asm/sal.h>
#include <asm/uaccess.h>
......@@ -145,7 +145,7 @@ do_notify_resume_user (sigset_t *oldset, struct sigscratch *scr, long in_syscall
/*
* We use this if we don't have any better idle routine..
*/
static void
void
default_idle (void)
{
/* may want to do PAL_LIGHT_HALT here... */
......@@ -660,7 +660,7 @@ dup_task_struct(struct task_struct *orig)
{
struct task_struct *tsk;
tsk = __get_free_pages(GFP_KERNEL, KERNEL_STACK_SIZE_ORDER);
tsk = (void *) __get_free_pages(GFP_KERNEL, KERNEL_STACK_SIZE_ORDER);
if (!tsk)
return NULL;
......
arch/ia64/kernel/semaphore.c
View file @ 3f4533c3
/*
* IA-64 semaphore implementation (derived from x86 version).
*
* Copyright (C) 1999-2000 Hewlett-Packard Co
* Copyright (C) 1999-2000 David Mosberger-Tang <davidm@hpl.hp.com>
* Copyright (C) 1999-2000, 2002 Hewlett-Packard Co
* David Mosberger-Tang <davidm@hpl.hp.com>
*/
/*
......@@ -25,6 +25,7 @@
*/
#include <linux/sched.h>
#include <asm/errno.h>
#include <asm/semaphore.h>
/*
......
arch/ia64/kernel/setup.c
View file @ 3f4533c3
......@@ -19,6 +19,7 @@
#include <linux/config.h>
#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/bootmem.h>
#include <linux/console.h>
#include <linux/delay.h>
......@@ -30,7 +31,6 @@
#include <linux/threads.h>
#include <linux/tty.h>
#include <asm/acpi-ext.h>
#include <asm/ia32.h>
#include <asm/page.h>
#include <asm/machvec.h>
......@@ -54,7 +54,10 @@
extern char _end;
#ifdef CONFIG_SMP
unsigned long __per_cpu_offset[NR_CPUS];
#endif
struct cpuinfo_ia64 cpu_info __per_cpu_data;
unsigned long ia64_phys_stacked_size_p8;
......@@ -64,6 +67,8 @@ struct screen_info screen_info;
unsigned long ia64_iobase; /* virtual address for I/O accesses */
unsigned char aux_device_present = 0xaa; /* XXX remove this when legacy I/O is gone */
#define COMMAND_LINE_SIZE 512
char saved_command_line[COMMAND_LINE_SIZE]; /* used in proc filesystem */
......@@ -282,6 +287,7 @@ void __init
setup_arch (char **cmdline_p)
{
extern unsigned long ia64_iobase;
unsigned long phys_iobase;
unw_init();
......@@ -314,24 +320,23 @@ setup_arch (char **cmdline_p)
#endif
/*
* Set `iobase' to the appropriate address in region 6
* (uncached access range)
* Set `iobase' to the appropriate address in region 6 (uncached access range).
*
* The EFI memory map is the "prefered" location to get the I/O port
* space base, rather the relying on AR.KR0. This should become more
* clear in future SAL specs. We'll fall back to getting it out of
* AR.KR0 if no appropriate entry is found in the memory map.
* The EFI memory map is the "preferred" location to get the I/O port space base,
* rather the relying on AR.KR0. This should become more clear in future SAL
* specs. We'll fall back to getting it out of AR.KR0 if no appropriate entry is
* found in the memory map.
*/
ia64_iobase = efi_get_iobase();
if (ia64_iobase)
phys_iobase = efi_get_iobase();
if (phys_iobase)
/* set AR.KR0 since this is all we use it for anyway */
ia64_set_kr(IA64_KR_IO_BASE, ia64_iobase);
ia64_set_kr(IA64_KR_IO_BASE, phys_iobase);
else {
ia64_iobase = ia64_get_kr(IA64_KR_IO_BASE);
phys_iobase = ia64_get_kr(IA64_KR_IO_BASE);
printk("No I/O port range found in EFI memory map, falling back to AR.KR0\n");
printk("I/O port base = 0x%lx\n", ia64_iobase);
printk("I/O port base = 0x%lx\n", phys_iobase);
}
ia64_iobase = __IA64_UNCACHED_OFFSET | (ia64_iobase & ~PAGE_OFFSET);
ia64_iobase = (unsigned long) ioremap(phys_iobase, 0);
#ifdef CONFIG_SMP
cpu_physical_id(0) = hard_smp_processor_id();
......@@ -339,20 +344,23 @@ setup_arch (char **cmdline_p)
cpu_init(); /* initialize the bootstrap CPU */
if (efi.acpi20) {
/* Parse the ACPI 2.0 tables */
acpi20_parse(efi.acpi20);
} else if (efi.acpi) {
/* Parse the ACPI tables */
acpi_parse(efi.acpi);
}
#ifdef CONFIG_ACPI_BOOT
acpi_boot_init(*cmdline_p);
#endif
#ifdef CONFIG_VT
# if defined(CONFIG_VGA_CONSOLE)
conswitchp = &vga_con;
# elif defined(CONFIG_DUMMY_CONSOLE)
# if defined(CONFIG_DUMMY_CONSOLE)
conswitchp = &dummy_con;
# endif
# if defined(CONFIG_VGA_CONSOLE)
/*
* Non-legacy systems may route legacy VGA MMIO range to system
* memory. vga_con probes the MMIO hole, so memory looks like
* a VGA device to it. The EFI memory map can tell us if it's
* memory so we can avoid this problem.
*/
if (efi_mem_type(0xA0000) != EFI_CONVENTIONAL_MEMORY)
conswitchp = &vga_con;
# endif
#endif
#ifdef CONFIG_IA64_MCA
......@@ -522,20 +530,25 @@ setup_per_cpu_areas (void)
void
cpu_init (void)
{
extern char __per_cpu_start[], __phys_per_cpu_start[], __per_cpu_end[];
extern char __per_cpu_start[], __phys_per_cpu_start[];
extern void __init ia64_mmu_init (void *);
unsigned long num_phys_stacked;
pal_vm_info_2_u_t vmi;
unsigned int max_ctx;
struct cpuinfo_ia64 *my_cpu_info;
void *my_cpu_data;
#ifdef CONFIG_SMP
extern char __per_cpu_end[];
int cpu = smp_processor_id();
my_cpu_data = alloc_bootmem_pages(__per_cpu_end - __per_cpu_start);
memcpy(my_cpu_data, __phys_per_cpu_start, __per_cpu_end - __per_cpu_start);
__per_cpu_offset[cpu] = (char *) my_cpu_data - __per_cpu_start;
my_cpu_info = my_cpu_data + ((char *) &cpu_info - __per_cpu_start);
#else
my_cpu_data = __phys_per_cpu_start;
#endif
my_cpu_info = my_cpu_data + ((char *) &cpu_info - __per_cpu_start);
/*
......
arch/ia64/kernel/signal.c
View file @ 3f4533c3
......@@ -530,8 +530,8 @@ ia64_do_signal (sigset_t *oldset, struct sigscratch *scr, long in_syscall)
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->p_pptr->pid;
info.si_uid = current->p_pptr->uid;
info.si_pid = current->parent->pid;
info.si_uid = current->parent->uid;
}
/* If the (new) signal is now blocked, requeue it. */
......@@ -570,7 +570,7 @@ ia64_do_signal (sigset_t *oldset, struct sigscratch *scr, long in_syscall)
case SIGSTOP:
current->state = TASK_STOPPED;
current->exit_code = signr;
sig = current->p_pptr->sig;
sig = current->parent->sig;
if (sig && !(sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
......
arch/ia64/kernel/smp.c
View file @ 3f4533c3
......@@ -48,6 +48,7 @@
#include <asm/ptrace.h>
#include <asm/sal.h>
#include <asm/system.h>
#include <asm/tlbflush.h>
#include <asm/unistd.h>
#include <asm/mca.h>
......@@ -236,7 +237,7 @@ smp_call_function_single (int cpuid, void (*func) (void *info), void *info, int
int cpus = 1;
if (cpuid == smp_processor_id()) {
printk(__FUNCTION__" trying to call self\n");
printk("%s: trying to call self\n", __FUNCTION__);
return -EBUSY;
}
......
arch/ia64/kernel/smpboot.c
View file @ 3f4533c3
......@@ -68,6 +68,7 @@ static volatile unsigned long go[SLAVE + 1];
extern void __init calibrate_delay(void);
extern void start_ap(void);
extern unsigned long ia64_iobase;
int cpucount;
task_t *task_for_booting_cpu;
......@@ -345,6 +346,11 @@ smp_callin (void)
*/
ia64_init_itm();
/*
* Set I/O port base per CPU
*/
ia64_set_kr(IA64_KR_IO_BASE, __pa(ia64_iobase));
#ifdef CONFIG_IA64_MCA
ia64_mca_cmc_vector_setup(); /* Setup vector on AP & enable */
ia64_mca_check_errors(); /* For post-failure MCA error logging */
......
arch/ia64/kernel/sys_ia64.c
View file @ 3f4533c3
......@@ -47,7 +47,7 @@ arch_get_unmapped_area (struct file *filp, unsigned long addr, unsigned long len
/* At this point: (!vmm || addr < vmm->vm_end). */
if (TASK_SIZE - len < addr)
return -ENOMEM;
if (rgn_offset(addr) + len > RGN_MAP_LIMIT) /* no risk of overflow here... */
if (REGION_OFFSET(addr) + len > RGN_MAP_LIMIT) /* no risk of overflow here... */
return -ENOMEM;
if (!vmm || addr + len <= vmm->vm_start)
return addr;
......@@ -126,7 +126,7 @@ ia64_brk (unsigned long brk, long arg1, long arg2, long arg3,
}
/* Check against unimplemented/unmapped addresses: */
if ((newbrk - oldbrk) > RGN_MAP_LIMIT || rgn_offset(newbrk) > RGN_MAP_LIMIT)
if ((newbrk - oldbrk) > RGN_MAP_LIMIT || REGION_OFFSET(newbrk) > RGN_MAP_LIMIT)
goto out;
/* Check against rlimit.. */
......@@ -206,7 +206,7 @@ do_mmap2 (unsigned long addr, unsigned long len, int prot, int flags, int fd, un
* or across a region boundary. Note: RGN_MAP_LIMIT is equal to 2^n-PAGE_SIZE
* (for some integer n <= 61) and len > 0.
*/
roff = rgn_offset(addr);
roff = REGION_OFFSET(addr);
if ((len > RGN_MAP_LIMIT) || (roff > (RGN_MAP_LIMIT - len))) {
addr = -EINVAL;
goto out;
......
arch/ia64/kernel/traps.c
View file @ 3f4533c3
......@@ -214,7 +214,8 @@ ia64_ni_syscall (unsigned long arg0, unsigned long arg1, unsigned long arg2, uns
{
struct pt_regs *regs = (struct pt_regs *) &stack;
printk("<sc%ld(%lx,%lx,%lx,%lx)>\n", regs->r15, arg0, arg1, arg2, arg3);
printk("%s(%d): <sc%ld(%lx,%lx,%lx,%lx)>\n", current->comm, current->pid,
regs->r15, arg0, arg1, arg2, arg3);
return -ENOSYS;
}
......
arch/ia64/kernel/unwind_i.h
View file @ 3f4533c3
......@@ -103,7 +103,7 @@ struct unw_state_record {
unsigned int in_body : 1; /* are we inside a body (as opposed to a prologue)? */
unsigned long flags; /* see UNW_FLAG_* in unwind.h */
u8 *imask; /* imask of of spill_mask record or NULL */
u8 *imask; /* imask of spill_mask record or NULL */
unsigned long pr_val; /* predicate values */
unsigned long pr_mask; /* predicate mask */
long spill_offset; /* psp-relative offset for spill base */
......
arch/ia64/lib/Makefile
View file @ 3f4533c3
......@@ -16,6 +16,9 @@ obj-y := __divsi3.o __udivsi3.o __modsi3.o __umodsi3.o \
flush.o io.o do_csum.o \
memcpy.o memset.o strlen.o swiotlb.o
obj-$(CONFIG_ITANIUM) += copy_page.o
obj-$(CONFIG_MCKINLEY) += copy_page_mck.o
IGNORE_FLAGS_OBJS = __divsi3.o __udivsi3.o __modsi3.o __umodsi3.o \
__divdi3.o __udivdi3.o __moddi3.o __umoddi3.o
......
arch/ia64/lib/copy_page_mck.S 0 → 100644
View file @ 3f4533c3
/*
* McKinley-optimized version of copy_page().
*
* Copyright (C) 2002 Hewlett-Packard Co
* David Mosberger <davidm@hpl.hp.com>
*
* Inputs:
* in0: address of target page
* in1: address of source page
* Output:
* no return value
*
* General idea:
* - use regular loads and stores to prefetch data to avoid consuming M-slot just for
* lfetches => good for in-cache performance
* - avoid l2 bank-conflicts by not storing into the same 16-byte bank within a single
* cycle
*
* Principle of operation:
* First, note that L1 has a line-size of 64 bytes and L2 a line-size of 128 bytes.
* To avoid secondary misses in L2, we prefetch both source and destination with a line-size
* of 128 bytes. When both of these lines are in the L2 and the first half of the
* source line is in L1, we start copying the remaining words. The second half of the
* source line is prefetched in an earlier iteration, so that by the time we start
* accessing it, it's also present in the L1.
*
* We use a software-pipelined loop to control the overall operation. The pipeline
* has 2*PREFETCH_DIST+K stages. The first PREFETCH_DIST stages are used for prefetching
* source cache-lines. The second PREFETCH_DIST stages are used for prefetching destination
* cache-lines, the last K stages are used to copy the cache-line words not copied by
* the prefetches. The four relevant points in the pipelined are called A, B, C, D:
* p[A] is TRUE if a source-line should be prefetched, p[B] is TRUE if a destination-line
* should be prefetched, p[C] is TRUE if the second half of an L2 line should be brought
* into L1D and p[D] is TRUE if a cacheline needs to be copied.
*
* This all sounds very complicated, but thanks to the modulo-scheduled loop support,
* the resulting code is very regular and quite easy to follow (once you get the idea).
*
* As a secondary optimization, the first 2*PREFETCH_DIST iterations are implemented
* as the separate .prefetch_loop. Logically, this loop performs exactly like the
* main-loop (.line_copy), but has all known-to-be-predicated-off instructions removed,
* so that each loop iteration is faster (again, good for cached case).
*
* When reading the code, it helps to keep the following picture in mind:
*
* word 0 word 1
* +------+------+---
* | v[x] | t1 | ^
* | t2 | t3 | |
* | t4 | t5 | |
* | t6 | t7 | | 128 bytes
* | n[y] | t9 | | (L2 cache line)
* | t10 | t11 | |
* | t12 | t13 | |
* | t14 | t15 | v
* +------+------+---
*
* Here, v[x] is copied by the (memory) prefetch. n[y] is loaded at p[C]
* to fetch the second-half of the L2 cache line into L1, and the tX words are copied in
* an order that avoids bank conflicts.
*/
#include <asm/asmmacro.h>
#include <asm/page.h>
#define PREFETCH_DIST 8 // McKinley sustains 16 outstanding L2 misses (8 ld, 8 st)
#define src0 r2
#define src1 r3
#define dst0 r9
#define dst1 r10
#define src_pre_mem r11
#define dst_pre_mem r14
#define src_pre_l2 r15
#define dst_pre_l2 r16
#define t1 r17
#define t2 r18
#define t3 r19
#define t4 r20
#define t5 t1 // alias!
#define t6 t2 // alias!
#define t7 t3 // alias!
#define t9 t5 // alias!
#define t10 t4 // alias!
#define t11 t7 // alias!
#define t12 t6 // alias!
#define t14 t10 // alias!
#define t13 r21
#define t15 r22
#define saved_lc r23
#define saved_pr r24
#define A 0
#define B (PREFETCH_DIST)
#define C (B + PREFETCH_DIST)
#define D (C + 3)
#define N (D + 1)
#define Nrot ((N + 7) & ~7)
GLOBAL_ENTRY(copy_page)
.prologue
alloc r8 = ar.pfs, 2, Nrot-2, 0, Nrot
.rotr v[2*PREFETCH_DIST], n[D-C+1]
.rotp p[N]
.save ar.lc, saved_lc
mov saved_lc = ar.lc
.save pr, saved_pr
mov saved_pr = pr
.body
mov src_pre_mem = in1
mov pr.rot = 0x10000
mov ar.ec = 1 // special unrolled loop
mov dst_pre_mem = in0
mov ar.lc = 2*PREFETCH_DIST - 1
add src_pre_l2 = 8*8, in1
add dst_pre_l2 = 8*8, in0
add src0 = 8, in1 // first t1 src
add src1 = 3*8, in1 // first t3 src
add dst0 = 8, in0 // first t1 dst
add dst1 = 3*8, in0 // first t3 dst
mov t1 = (PAGE_SIZE/128) - (2*PREFETCH_DIST) - 1
nop.m 0
nop.i 0
;;
// same as .line_copy loop, but with all predicated-off instructions removed:
.prefetch_loop:
(p[A]) ld8 v[A] = [src_pre_mem], 128 // M0
(p[B]) st8 [dst_pre_mem] = v[B], 128 // M2
br.ctop.sptk .prefetch_loop
;;
cmp.eq p16, p0 = r0, r0 // reset p16 to 1 (br.ctop cleared it to zero)
mov ar.lc = t1 // with 64KB pages, t1 is too big to fit in 8 bits!
mov ar.ec = N // # of stages in pipeline
;;
.line_copy:
(p[D]) ld8 t2 = [src0], 3*8 // M0
(p[D]) ld8 t4 = [src1], 3*8 // M1
(p[B]) st8 [dst_pre_mem] = v[B], 128 // M2 prefetch dst from memory
(p[D]) st8 [dst_pre_l2] = n[D-C], 128 // M3 prefetch dst from L2
;;
(p[A]) ld8 v[A] = [src_pre_mem], 128 // M0 prefetch src from memory
(p[C]) ld8 n[0] = [src_pre_l2], 128 // M1 prefetch src from L2
(p[D]) st8 [dst0] = t1, 8 // M2
(p[D]) st8 [dst1] = t3, 8 // M3
;;
(p[D]) ld8 t5 = [src0], 8
(p[D]) ld8 t7 = [src1], 3*8
(p[D]) st8 [dst0] = t2, 3*8
(p[D]) st8 [dst1] = t4, 3*8
;;
(p[D]) ld8 t6 = [src0], 3*8
(p[D]) ld8 t10 = [src1], 8
(p[D]) st8 [dst0] = t5, 8
(p[D]) st8 [dst1] = t7, 3*8
;;
(p[D]) ld8 t9 = [src0], 3*8
(p[D]) ld8 t11 = [src1], 3*8
(p[D]) st8 [dst0] = t6, 3*8
(p[D]) st8 [dst1] = t10, 8
;;
(p[D]) ld8 t12 = [src0], 8
(p[D]) ld8 t14 = [src1], 8
(p[D]) st8 [dst0] = t9, 3*8
(p[D]) st8 [dst1] = t11, 3*8
;;
(p[D]) ld8 t13 = [src0], 4*8
(p[D]) ld8 t15 = [src1], 4*8
(p[D]) st8 [dst0] = t12, 8
(p[D]) st8 [dst1] = t14, 8
;;
(p[D-1])ld8 t1 = [src0], 8
(p[D-1])ld8 t3 = [src1], 8
(p[D]) st8 [dst0] = t13, 4*8
(p[D]) st8 [dst1] = t15, 4*8
br.ctop.sptk .line_copy
;;
mov ar.lc = saved_lc
mov pr = saved_pr, -1
br.ret.sptk.many rp
END(copy_page)
arch/ia64/lib/do_csum.S
View file @ 3f4533c3
......@@ -8,9 +8,11 @@
* in0: address of buffer to checksum (char *)
* in1: length of the buffer (int)
*
* Copyright (C) 1999, 2001 Hewlett-Packard Co
* Copyright (C) 1999 Stephane Eranian <eranian@hpl.hp.com>
* Copyright (C) 1999, 2001-2002 Hewlett-Packard Co
* Stephane Eranian <eranian@hpl.hp.com>
*
* 02/04/08 David Mosberger <davidm@hpl.hp.com>
* More cleanup and tuning.
* 01/04/18 Jun Nakajima <jun.nakajima@intel.com>
* Clean up and optimize and the software pipeline, loading two
* back-to-back 8-byte words per loop. Clean up the initialization
......@@ -71,8 +73,6 @@
// calculating the Internet checksum.
//
// NOT YET DONE:
// - use the lfetch instruction to augment the chances of the data being in
// the cache when we need it.
// - Maybe another algorithm which would take care of the folding at the
// end in a different manner
// - Work with people more knowledgeable than me on the network stack
......@@ -102,10 +102,6 @@
#define buf in0
#define len in1
#ifndef CONFIG_IA64_LOAD_LATENCY
#define CONFIG_IA64_LOAD_LATENCY 2
#endif
#define LOAD_LATENCY 2 // XXX fix me
#if (LOAD_LATENCY != 1) && (LOAD_LATENCY != 2)
......@@ -122,45 +118,46 @@ GLOBAL_ENTRY(do_csum)
.prologue
.save ar.pfs, saved_pfs
alloc saved_pfs=ar.pfs,2,16,1,16
.rotr word1[4], word2[4],result1[4],result2[4]
.rotp p[PIPE_DEPTH]
.rotr word1[4], word2[4],result1[LOAD_LATENCY+2],result2[LOAD_LATENCY+2]
.rotp p[PIPE_DEPTH], pC1[2], pC2[2]
mov ret0=r0 // in case we have zero length
cmp.lt p0,p6=r0,len // check for zero length or negative (32bit len)
;; // avoid WAW on CFM
mov tmp3=0x7 // a temporary mask/value
;;
add tmp1=buf,len // last byte's address
(p6) br.ret.spnt.many rp // return if true (hope we can avoid that)
.save pr, saved_pr
mov saved_pr=pr // preserve predicates (rotation)
(p6) br.ret.spnt.many rp // return if zero or negative length
and firstoff=7,buf // how many bytes off for first1 element
tbit.nz p15,p0=buf,0 // is buf an odd address ?
mov hmask=-1 // intialize head mask
;;
andcm first1=buf,tmp3 // 8byte aligned down address of first1 element
tbit.nz p15,p0=buf,0 // is buf an odd address?
and first1=-8,buf // 8-byte align down address of first1 element
and firstoff=7,buf // how many bytes off for first1 element
mov tmask=-1 // initialize tail mask
adds tmp2=-1,tmp1 // last-1
;;
adds tmp2=-1,tmp1 // last-1
and lastoff=7,tmp1 // how many bytes off for last element
andcm last=tmp2,tmp3 // address of word containing last byte
.save pr, saved_pr
mov saved_pr=pr // preserve predicates (rotation)
;;
sub tmp1=8,lastoff // complement to lastoff
and last=-8,tmp2 // address of word containing last byte
;;
sub tmp3=last,first1 // tmp3=distance from first1 to last
.save ar.lc, saved_lc
mov saved_lc=ar.lc // save lc
cmp.eq p8,p9=last,first1 // everything fits in one word ?
sub tmp1=8,lastoff // complement to lastoff
ld8 firstval=[first1],8 // load,ahead of time, "first1" word
ld8 firstval=[first1],8 // load, ahead of time, "first1" word
and tmp1=7, tmp1 // make sure that if tmp1==8 -> tmp1=0
shl tmp2=firstoff,3 // number of bits
;;
and tmp1=7, tmp1 // make sure that if tmp1==8 -> tmp1=0
(p9) ld8 lastval=[last] // load,ahead of time, "last" word, if needed
(p9) ld8 lastval=[last] // load, ahead of time, "last" word, if needed
shl tmp1=tmp1,3 // number of bits
(p9) adds tmp3=-8,tmp3 // effectively loaded
;;
(p8) mov lastval=r0 // we don't need lastval if first1==last
shl tmp1=tmp1,3 // number of bits
shl hmask=hmask,tmp2 // build head mask, mask off [0,first1off[
;;
shr.u tmask=tmask,tmp1 // build tail mask, mask off ]8,lastoff]
.save ar.lc, saved_lc
mov saved_lc=ar.lc // save lc
;;
.body
#define count tmp3
......@@ -171,8 +168,8 @@ GLOBAL_ENTRY(do_csum)
;;
// If count is odd, finish this 8-byte word so that we can
// load two back-to-back 8-byte words per loop thereafter.
tbit.nz p10,p11=count,0 // if (count is odd)
and word1[0]=firstval,hmask // and mask it as appropriate
tbit.nz p10,p11=count,0 // if (count is odd)
;;
(p8) mov result1[0]=word1[0]
(p9) add result1[0]=word1[0],word2[0]
......@@ -181,9 +178,8 @@ GLOBAL_ENTRY(do_csum)
;;
(p6) adds result1[0]=1,result1[0]
(p8) br.cond.dptk .do_csum_exit // if (within an 8-byte word)
;;
(p11) br.cond.dptk .do_csum16 // if (count is even)
;;
// Here count is odd.
ld8 word1[1]=[first1],8 // load an 8-byte word
cmp.eq p9,p10=1,count // if (count == 1)
......@@ -194,11 +190,9 @@ GLOBAL_ENTRY(do_csum)
cmp.ltu p6,p0=result1[0],word1[1]
;;
(p6) adds result1[0]=1,result1[0]
;;
(p9) br.cond.sptk .do_csum_exit // if (count == 1) exit
// Fall through to caluculate the checksum, feeding result1[0] as
// the initial value in result1[0].
;;
//
// Calculate the checksum loading two 8-byte words per loop.
//
......@@ -207,45 +201,36 @@ GLOBAL_ENTRY(do_csum)
shr.u count=count,1 // we do 16 bytes per loop
;;
cmp.eq p9,p10=r0,count // if (count == 0)
adds count=-1,count
brp.loop.imp 1f,2f
;;
adds count=-1,count
mov ar.ec=PIPE_DEPTH
;;
mov ar.lc=count // set lc
;;
// result1[0] must be initialized in advance.
mov result2[0]=r0
;;
mov pr.rot=1<<16
;;
mov carry1=r0
mov carry2=r0
;;
add first2=8,first1
;;
(p9) br.cond.sptk .do_csum_exit
;;
nop.m 0
nop.i 0
;;
.align 32
1:
(ELD_1) cmp.ltu p31,p0=result1[LOAD_LATENCY],word1[LOAD_LATENCY+1]
(p32) adds carry1=1,carry1
(ELD_1) cmp.ltu p47,p0=result2[LOAD_LATENCY],word2[LOAD_LATENCY+1]
(p48) adds carry2=1,carry2
(ELD_1) cmp.ltu pC1[0],p0=result1[LOAD_LATENCY],word1[LOAD_LATENCY+1]
(pC1[1])adds carry1=1,carry1
(ELD_1) cmp.ltu pC2[0],p0=result2[LOAD_LATENCY],word2[LOAD_LATENCY+1]
(pC2[1])adds carry2=1,carry2
(ELD) add result1[LOAD_LATENCY-1]=result1[LOAD_LATENCY],word1[LOAD_LATENCY]
(ELD) add result2[LOAD_LATENCY-1]=result2[LOAD_LATENCY],word2[LOAD_LATENCY]
2:
(p16) ld8 word1[0]=[first1],16
(p16) ld8 word2[0]=[first2],16
[2:]
(p[0]) ld8 word1[0]=[first1],16
(p[0]) ld8 word2[0]=[first2],16
br.ctop.sptk 1b
;;
// Since len is a 32-bit value, carry cannot be larger than
// a 64-bit value.
(p32) adds carry1=1,carry1 // since we miss the last one
(p48) adds carry2=1,carry2
// Since len is a 32-bit value, carry cannot be larger than a 64-bit value.
(pC1[1])adds carry1=1,carry1 // since we miss the last one
(pC2[1])adds carry2=1,carry2
;;
add result1[LOAD_LATENCY+1]=result1[LOAD_LATENCY+1],carry1
add result2[LOAD_LATENCY+1]=result2[LOAD_LATENCY+1],carry2
......@@ -263,18 +248,15 @@ GLOBAL_ENTRY(do_csum)
(p6) adds result1[0]=1,result1[0]
;;
.do_csum_exit:
movl tmp3=0xffffffff
;;
// XXX Fixme
//
// now fold 64 into 16 bits taking care of carry
// that's not very good because it has lots of sequentiality
//
and tmp1=result1[0],tmp3
mov tmp3=0xffff
zxt4 tmp1=result1[0]
shr.u tmp2=result1[0],32
;;
add result1[0]=tmp1,tmp2
shr.u tmp3=tmp3,16
;;
and tmp1=result1[0],tmp3
shr.u tmp2=result1[0],16
......
arch/ia64/lib/memset.S
View file @ 3f4533c3
......@@ -9,8 +9,8 @@
* in1: byte value to use for storing
* in2: length of the buffer
*
* Copyright (C) 1999, 2001 Hewlett-Packard Co
* Copyright (C) 1999 Stephane Eranian <eranian@hpl.hp.com>
* Copyright (C) 1999, 2001, 2002 Hewlett-Packard Co
* Stephane Eranian <eranian@hpl.hp.com>
*/
#include <asm/asmmacro.h>
......@@ -30,7 +30,19 @@
#define saved_lc r20
#define tmp r21
GLOBAL_ENTRY(memset)
GLOBAL_ENTRY(__bzero)
.prologue
.save ar.pfs, saved_pfs
alloc saved_pfs=ar.pfs,0,0,3,0
mov out2=out1
mov out1=0
/* FALL THROUGH (explicit NOPs so that next alloc is preceded by stop bit!) */
nop.m 0
nop.f 0
nop.i 0
;;
END(__bzero)
GLOBAL_ENTRY(__memset_generic)
.prologue
.save ar.pfs, saved_pfs
alloc saved_pfs=ar.pfs,3,0,0,0 // cnt is sink here
......@@ -105,4 +117,7 @@ GLOBAL_ENTRY(memset)
;;
(p6) st1 [buf]=val // only 1 byte left
br.ret.sptk.many rp
END(memset)
END(__memset_generic)
.global memset
memset = __memset_generic // alias needed for gcc
arch/ia64/lib/swiotlb.c
View file @ 3f4533c3
......@@ -10,6 +10,7 @@
* unnecessary i-cache flushing.
*/
#include <linux/cache.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/pci.h>
......@@ -24,9 +25,6 @@
#include <linux/init.h>
#include <linux/bootmem.h>
#define ALIGN(val, align) ((unsigned long) \
(((unsigned long) (val) + ((align) - 1)) & ~((align) - 1)))
#define OFFSET(val,align) ((unsigned long) \
( (val) & ( (align) - 1)))
......@@ -276,8 +274,11 @@ swiotlb_alloc_consistent (struct pci_dev *hwdev, size_t size, dma_addr_t *dma_ha
int gfp = GFP_ATOMIC;
void *ret;
if (!hwdev || hwdev->dma_mask <= 0xffffffff)
gfp |= GFP_DMA; /* XXX fix me: should change this to GFP_32BIT or ZONE_32BIT */
/*
* Alloc_consistent() is defined to return memory < 4GB, no matter what the DMA
* mask says.
*/
gfp |= GFP_DMA; /* XXX fix me: should change this to GFP_32BIT or ZONE_32BIT */
ret = (void *)__get_free_pages(gfp, get_order(size));
if (!ret)
return NULL;
......
arch/ia64/mm/fault.c
View file @ 3f4533c3
......@@ -120,15 +120,15 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re
if (!(prev_vma && (prev_vma->vm_flags & VM_GROWSUP) && (address == prev_vma->vm_end))) {
if (!(vma->vm_flags & VM_GROWSDOWN))
goto bad_area;
if (rgn_index(address) != rgn_index(vma->vm_start)
|| rgn_offset(address) >= RGN_MAP_LIMIT)
if (REGION_NUMBER(address) != REGION_NUMBER(vma->vm_start)
|| REGION_OFFSET(address) >= RGN_MAP_LIMIT)
goto bad_area;
if (expand_stack(vma, address))
goto bad_area;
} else {
vma = prev_vma;
if (rgn_index(address) != rgn_index(vma->vm_start)
|| rgn_offset(address) >= RGN_MAP_LIMIT)
if (REGION_NUMBER(address) != REGION_NUMBER(vma->vm_start)
|| REGION_OFFSET(address) >= RGN_MAP_LIMIT)
goto bad_area;
if (expand_backing_store(vma, address))
goto bad_area;
......
arch/ia64/mm/init.c
View file @ 3f4533c3
......@@ -40,10 +40,10 @@ static unsigned long totalram_pages;
static int pgt_cache_water[2] = { 25, 50 };
int
void
check_pgt_cache (void)
{
int low, high, freed = 0;
int low, high;
low = pgt_cache_water[0];
high = pgt_cache_water[1];
......@@ -51,12 +51,11 @@ check_pgt_cache (void)
if (pgtable_cache_size > high) {
do {
if (pgd_quicklist)
free_page((unsigned long)pgd_alloc_one_fast(0)), ++freed;
free_page((unsigned long)pgd_alloc_one_fast(0));
if (pmd_quicklist)
free_page((unsigned long)pmd_alloc_one_fast(0, 0)), ++freed;
free_page((unsigned long)pmd_alloc_one_fast(0, 0));
} while (pgtable_cache_size > low);
}
return freed;
}
/*
......@@ -348,8 +347,6 @@ paging_init (void)
{
unsigned long max_dma, zones_size[MAX_NR_ZONES];
clear_page((void *) ZERO_PAGE_ADDR);
/* initialize mem_map[] */
memset(zones_size, 0, sizeof(zones_size));
......
arch/ia64/mm/tlb.c
View file @ 3f4533c3
......@@ -16,10 +16,11 @@
#include <linux/smp.h>
#include <linux/mm.h>
#include <asm/delay.h>
#include <asm/mmu_context.h>
#include <asm/pgalloc.h>
#include <asm/pal.h>
#include <asm/delay.h>
#include <asm/tlbflush.h>
#define SUPPORTED_PGBITS ( \
1 << _PAGE_SIZE_256M | \
......@@ -79,7 +80,7 @@ wrap_mmu_context (struct mm_struct *mm)
flush_tlb_all();
}
static inline void
void
ia64_global_tlb_purge (unsigned long start, unsigned long end, unsigned long nbits)
{
static spinlock_t ptcg_lock = SPIN_LOCK_UNLOCKED;
......
arch/ia64/vmlinux.lds.S
View file @ 3f4533c3
......@@ -28,11 +28,6 @@ SECTIONS
.text : AT(ADDR(.text) - PAGE_OFFSET)
{
*(.text.ivt)
/* these are not really text pages, but they need to be page aligned: */
*(__special_page_section)
__start_gate_section = .;
*(.text.gate)
__stop_gate_section = .;
*(.text)
}
.text2 : AT(ADDR(.text2) - PAGE_OFFSET)
......@@ -120,6 +115,13 @@ SECTIONS
.data.init_task : AT(ADDR(.data.init_task) - PAGE_OFFSET)
{ *(.data.init_task) }
.data.page_aligned : AT(ADDR(.data.page_aligned) - PAGE_OFFSET)
{ *(__special_page_section)
__start_gate_section = .;
*(.text.gate)
__stop_gate_section = .;
}
. = ALIGN(SMP_CACHE_BYTES);
.data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - PAGE_OFFSET)
{ *(.data.cacheline_aligned) }
......
drivers/pci/pci.ids
View file @ 3f4533c3
......@@ -931,6 +931,9 @@
121a NetServer SMIC Controller
121b NetServer Legacy COM Port Decoder
121c NetServer PCI COM Port Decoder
1229 zx1 System Bus Adapter
122a zx1 I/O Controller
122e zx1 Local Bus Adapter
2910 E2910A
2925 E2925A
103e Solliday Engineering
......
include/asm-ia64/acpi-ext.h deleted 100644 → 0
View file @ 92ebc650
#ifndef _ASM_IA64_ACPI_EXT_H
#define _ASM_IA64_ACPI_EXT_H
/*
* Advanced Configuration and Power Infterface
* Based on 'ACPI Specification 1.0b' Febryary 2, 1999
* and 'IA-64 Extensions to the ACPI Specification' Rev 0.6
*
* Copyright (C) 1999 VA Linux Systems
* Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
* Copyright (C) 2000 Intel Corp.
* Copyright (C) 2000,2001 J.I. Lee <jung-ik.lee@intel.com>
* ACPI 2.0 specification
*/
#include <linux/config.h>
#include <linux/types.h>
#include <linux/mm.h>
#pragma pack(1)
#define ACPI_RSDP_SIG "RSD PTR " /* Trailing space required */
#define ACPI_RSDP_SIG_LEN 8
typedef struct {
char signature[8];
u8 checksum;
char oem_id[6];
u8 revision;
u32 rsdt;
u32 length;
struct acpi_xsdt *xsdt;
u8 ext_checksum;
u8 reserved[3];
} acpi20_rsdp_t;
typedef struct {
char signature[4];
u32 length;
u8 revision;
u8 checksum;
char oem_id[6];
char oem_table_id[8];
u32 oem_revision;
u32 creator_id;
u32 creator_revision;
} acpi_desc_table_hdr_t;
#define ACPI_RSDT_SIG "RSDT"
#define ACPI_RSDT_SIG_LEN 4
typedef struct {
acpi_desc_table_hdr_t header;
u8 reserved[4];
u32 entry_ptrs[1]; /* Not really . . . */
} acpi20_rsdt_t;
#define ACPI_XSDT_SIG "XSDT"
#define ACPI_XSDT_SIG_LEN 4
typedef struct acpi_xsdt {
acpi_desc_table_hdr_t header;
unsigned long entry_ptrs[1]; /* Not really . . . */
} acpi_xsdt_t;
/* Common structures for ACPI 2.0 and 0.71 */
typedef struct acpi_entry_iosapic {
u8 type;
u8 length;
u8 id;
u8 reserved;
u32 irq_base; /* start of IRQ's this IOSAPIC is responsible for. */
unsigned long address; /* Address of this IOSAPIC */
} acpi_entry_iosapic_t;
/* Local SAPIC flags */
#define LSAPIC_ENABLED (1<<0)
#define LSAPIC_PERFORMANCE_RESTRICTED (1<<1)
#define LSAPIC_PRESENT (1<<2)
/* Defines legacy IRQ->pin mapping */
typedef struct {
u8 type;
u8 length;
u8 bus; /* Constant 0 == ISA */
u8 isa_irq; /* ISA IRQ # */
u32 pin; /* called vector in spec; really IOSAPIC pin number */
u16 flags; /* Edge/Level trigger & High/Low active */
} acpi_entry_int_override_t;
#define INT_OVERRIDE_ACTIVE_LOW 0x03
#define INT_OVERRIDE_LEVEL_TRIGGER 0x0d
/* IA64 ext 0.71 */
typedef struct {
char signature[8];
u8 checksum;
char oem_id[6];
char reserved; /* Must be 0 */
struct acpi_rsdt *rsdt;
} acpi_rsdp_t;
typedef struct acpi_rsdt {
acpi_desc_table_hdr_t header;
u8 reserved[4];
unsigned long entry_ptrs[1]; /* Not really . . . */
} acpi_rsdt_t;
#define ACPI_SAPIC_SIG "SPIC"
#define ACPI_SAPIC_SIG_LEN 4
typedef struct {
acpi_desc_table_hdr_t header;
u8 reserved[4];
unsigned long interrupt_block;
} acpi_sapic_t;
/* SAPIC structure types */
#define ACPI_ENTRY_LOCAL_SAPIC 0
#define ACPI_ENTRY_IO_SAPIC 1
#define ACPI_ENTRY_INT_SRC_OVERRIDE 2
#define ACPI_ENTRY_PLATFORM_INT_SOURCE 3 /* Unimplemented */
typedef struct acpi_entry_lsapic {
u8 type;
u8 length;
u16 acpi_processor_id;
u16 flags;
u8 id;
u8 eid;
} acpi_entry_lsapic_t;
typedef struct {
u8 type;
u8 length;
u16 flags;
u8 int_type;
u8 id;
u8 eid;
u8 iosapic_vector;
u8 reserved[4];
u32 global_vector;
} acpi_entry_platform_src_t;
/* ACPI 2.0 with 1.3 errata specific structures */
#define ACPI_MADT_SIG "APIC"
#define ACPI_MADT_SIG_LEN 4
typedef struct {
acpi_desc_table_hdr_t header;
u32 lapic_address;
u32 flags;
} acpi_madt_t;
/* acpi 2.0 MADT flags */
#define MADT_PCAT_COMPAT (1<<0)
/* acpi 2.0 MADT structure types */
#define ACPI20_ENTRY_LOCAL_APIC 0
#define ACPI20_ENTRY_IO_APIC 1
#define ACPI20_ENTRY_INT_SRC_OVERRIDE 2
#define ACPI20_ENTRY_NMI_SOURCE 3
#define ACPI20_ENTRY_LOCAL_APIC_NMI 4
#define ACPI20_ENTRY_LOCAL_APIC_ADDR_OVERRIDE 5
#define ACPI20_ENTRY_IO_SAPIC 6
#define ACPI20_ENTRY_LOCAL_SAPIC 7
#define ACPI20_ENTRY_PLATFORM_INT_SOURCE 8
typedef struct acpi20_entry_lsapic {
u8 type;
u8 length;
u8 acpi_processor_id;
u8 id;
u8 eid;
u8 reserved[3];
u32 flags;
} acpi20_entry_lsapic_t;
typedef struct acpi20_entry_lapic_addr_override {
u8 type;
u8 length;
u8 reserved[2];
unsigned long lapic_address;
} acpi20_entry_lapic_addr_override_t;
typedef struct {
u8 type;
u8 length;
u16 flags;
u8 int_type;
u8 id;
u8 eid;
u8 iosapic_vector;
u32 global_vector;
} acpi20_entry_platform_src_t;
/* constants for interrupt routing API for device drivers */
#define ACPI20_ENTRY_PIS_PMI 1
#define ACPI20_ENTRY_PIS_INIT 2
#define ACPI20_ENTRY_PIS_CPEI 3
#define ACPI_MAX_PLATFORM_IRQS 4
#define ACPI_SPCRT_SIG "SPCR"
#define ACPI_SPCRT_SIG_LEN 4
#define ACPI_DBGPT_SIG "DBGP"
#define ACPI_DBGPT_SIG_LEN 4
extern int acpi20_parse(acpi20_rsdp_t *);
extern int acpi20_early_parse(acpi20_rsdp_t *);
extern int acpi_parse(acpi_rsdp_t *);
extern const char *acpi_get_sysname (void);
extern int acpi_request_vector(u32 int_type);
extern void (*acpi_idle) (void); /* power-management idle function, if any */
#ifdef CONFIG_NUMA
extern cnodeid_t paddr_to_nid(unsigned long paddr);
#endif
/*
* ACPI 2.0 SRAT Table
* http://www.microsoft.com/HWDEV/design/SRAT.htm
*/
typedef struct acpi_srat {
acpi_desc_table_hdr_t header;
u32 table_revision;
u64 reserved;
} acpi_srat_t;
typedef struct srat_cpu_affinity {
u8 type;
u8 length;
u8 proximity_domain;
u8 apic_id;
u32 flags;
u8 local_sapic_eid;
u8 reserved[7];
} srat_cpu_affinity_t;
typedef struct srat_memory_affinity {
u8 type;
u8 length;
u8 proximity_domain;
u8 reserved[5];
u32 base_addr_lo;
u32 base_addr_hi;
u32 length_lo;
u32 length_hi;
u32 memory_type;
u32 flags;
u64 reserved2;
} srat_memory_affinity_t;
/* ACPI 2.0 SRAT structure */
#define ACPI_SRAT_SIG "SRAT"
#define ACPI_SRAT_SIG_LEN 4
#define ACPI_SRAT_REVISION 1
#define SRAT_CPU_STRUCTURE 0
#define SRAT_MEMORY_STRUCTURE 1
/* Only 1 flag for cpu affinity structure! */
#define SRAT_CPU_FLAGS_ENABLED 0x00000001
#define SRAT_MEMORY_FLAGS_ENABLED 0x00000001
#define SRAT_MEMORY_FLAGS_HOTREMOVABLE 0x00000002
/* ACPI 2.0 address range types */
#define ACPI_ADDRESS_RANGE_MEMORY 1
#define ACPI_ADDRESS_RANGE_RESERVED 2
#define ACPI_ADDRESS_RANGE_ACPI 3
#define ACPI_ADDRESS_RANGE_NVS 4
#define NODE_ARRAY_INDEX(x) ((x) / 8) /* 8 bits/char */
#define NODE_ARRAY_OFFSET(x) ((x) % 8) /* 8 bits/char */
#define MAX_PXM_DOMAINS (256)
#ifdef CONFIG_DISCONTIGMEM
/*
* List of node memory chunks. Filled when parsing SRAT table to
* obtain information about memory nodes.
*/
struct node_memory_chunk_s {
unsigned long start_paddr;
unsigned long size;
int pxm; // proximity domain of node
int nid; // which cnode contains this chunk?
int bank; // which mem bank on this node
};
extern struct node_memory_chunk_s node_memory_chunk[PLAT_MAXCLUMPS]; // temporary?
struct node_cpuid_s {
u16 phys_id; /* id << 8 | eid */
int pxm; // proximity domain of cpu
int nid;
};
extern struct node_cpuid_s node_cpuid[NR_CPUS];
extern int pxm_to_nid_map[MAX_PXM_DOMAINS]; /* _PXM to logical node ID map */
extern int nid_to_pxm_map[PLAT_MAX_COMPACT_NODES]; /* logical node ID to _PXM map */
extern int numnodes; /* total number of nodes in system */
extern int num_memory_chunks; /* total number of memory chunks */
/*
* ACPI 2.0 SLIT Table
* http://devresource.hp.com/devresource/Docs/TechPapers/IA64/slit.pdf
*/
typedef struct acpi_slit {
acpi_desc_table_hdr_t header;
u64 localities;
u8 entries[1]; /* dummy, real size = locality^2 */
} acpi_slit_t;
extern u8 acpi20_slit[PLAT_MAX_COMPACT_NODES * PLAT_MAX_COMPACT_NODES];
#define ACPI_SLIT_SIG "SLIT"
#define ACPI_SLIT_SIG_LEN 4
#define ACPI_SLIT_REVISION 1
#define ACPI_SLIT_LOCAL 10
#endif /* CONFIG_DISCONTIGMEM */
#pragma pack()
#endif /* _ASM_IA64_ACPI_EXT_H */
include/asm-ia64/acpi.h 0 → 100644
View file @ 3f4533c3
/*
* asm-ia64/acpi.h
*
* Copyright (C) 1999 VA Linux Systems
* Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
* Copyright (C) 2000,2001 J.I. Lee <jung-ik.lee@intel.com>
* Copyright (C) 2001,2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#ifndef _ASM_ACPI_H
#define _ASM_ACPI_H
#ifdef __KERNEL__
#define __acpi_map_table(phys_addr, size) __va(phys_addr)
int acpi_boot_init (char *cdline);
int acpi_find_rsdp (unsigned long *phys_addr);
int acpi_request_vector (u32 int_type);
int acpi_get_prt (struct pci_vector_struct **vectors, int *count);
int acpi_get_interrupt_model(int *type);
#ifdef CONFIG_DISCONTIGMEM
#define NODE_ARRAY_INDEX(x) ((x) / 8) /* 8 bits/char */
#define NODE_ARRAY_OFFSET(x) ((x) % 8) /* 8 bits/char */
#define MAX_PXM_DOMAINS (256)
#endif /* CONFIG_DISCONTIGMEM */
#endif /*__KERNEL__*/
#endif /*_ASM_ACPI_H*/
include/asm-ia64/acpikcfg.h deleted 100644 → 0
View file @ 92ebc650
#ifndef _ASM_IA64_ACPIKCFG_H
#define _ASM_IA64_ACPIKCFG_H
/*
* acpikcfg.h - ACPI based Kernel Configuration Manager External Interfaces
*
* Copyright (C) 2000 Intel Corp.
* Copyright (C) 2000 J.I. Lee <jung-ik.lee@intel.com>
*/
u32 __init acpi_cf_init (void * rsdp);
u32 __init acpi_cf_terminate (void );
u32 __init
acpi_cf_get_pci_vectors (
struct pci_vector_struct **vectors,
int *num_pci_vectors
);
#ifdef CONFIG_ACPI_KERNEL_CONFIG_DEBUG
void __init
acpi_cf_print_pci_vectors (
struct pci_vector_struct *vectors,
int num_pci_vectors
);
#endif
#endif /* _ASM_IA64_ACPIKCFG_H */
include/asm-ia64/cacheflush.h 0 → 100644
View file @ 3f4533c3
#ifndef _ASM_IA64_CACHEFLUSH_H
#define _ASM_IA64_CACHEFLUSH_H
/*
* Copyright (C) 2002 Hewlett-Packard Co
* David Mosberger-Tang <davidm@hpl.hp.com>
*/
#include <asm/bitops.h>
#include <asm/page.h>
/*
* Cache flushing routines. This is the kind of stuff that can be very expensive, so try
* to avoid them whenever possible.
*/
#define flush_cache_all() do { } while (0)
#define flush_cache_mm(mm) do { } while (0)
#define flush_cache_range(vma, start, end) do { } while (0)
#define flush_cache_page(vma, vmaddr) do { } while (0)
#define flush_page_to_ram(page) do { } while (0)
#define flush_icache_page(vma,page) do { } while (0)
#define flush_dcache_page(page) \
do { \
clear_bit(PG_arch_1, &page->flags); \
} while (0)
extern void flush_icache_range (unsigned long start, unsigned long end);
#define flush_icache_user_range(vma, page, user_addr, len) \
do { \
unsigned long _addr = (unsigned long) page_address(page) + ((user_addr) & ~PAGE_MASK); \
flush_icache_range(_addr, _addr + (len)); \
} while (0)
#endif /* _ASM_IA64_CACHEFLUSH_H */
include/asm-ia64/efi.h
View file @ 3f4533c3
......@@ -87,6 +87,8 @@ typedef struct {
#define EFI_MEMORY_RUNTIME 0x8000000000000000 /* range requires runtime mapping */
#define EFI_MEMORY_DESCRIPTOR_VERSION 1
#define EFI_PAGE_SHIFT 12
typedef struct {
u32 type;
u32 pad;
......@@ -257,6 +259,7 @@ extern void efi_memmap_walk (efi_freemem_callback_t callback, void *arg);
extern void efi_gettimeofday (struct timeval *tv);
extern void efi_enter_virtual_mode (void); /* switch EFI to virtual mode, if possible */
extern u64 efi_get_iobase (void);
extern u32 efi_mem_type (u64 phys_addr);
/*
* Variable Attributes
......
include/asm-ia64/hw_irq.h
View file @ 3f4533c3
......@@ -88,6 +88,7 @@ hw_resend_irq (struct hw_interrupt_type *h, unsigned int vector)
extern struct irq_desc _irq_desc[NR_IRQS];
#ifndef CONFIG_IA64_GENERIC
static inline struct irq_desc *
__ia64_irq_desc (unsigned int irq)
{
......@@ -105,6 +106,7 @@ __ia64_local_vector_to_irq (ia64_vector vec)
{
return (unsigned int) vec;
}
#endif
/*
* Next follows the irq descriptor interface. On IA-64, each CPU supports 256 interrupt
......
include/asm-ia64/ide.h
View file @ 3f4533c3
......@@ -31,14 +31,14 @@ static __inline__ int
ide_default_irq (ide_ioreg_t base)
{
switch (base) {
case 0x1f0: return isa_irq_to_vector(14);
case 0x170: return isa_irq_to_vector(15);
case 0x1e8: return isa_irq_to_vector(11);
case 0x168: return isa_irq_to_vector(10);
case 0x1e0: return isa_irq_to_vector(8);
case 0x160: return isa_irq_to_vector(12);
default:
return 0;
case 0x1f0: return isa_irq_to_vector(14);
case 0x170: return isa_irq_to_vector(15);
case 0x1e8: return isa_irq_to_vector(11);
case 0x168: return isa_irq_to_vector(10);
case 0x1e0: return isa_irq_to_vector(8);
case 0x160: return isa_irq_to_vector(12);
default:
return 0;
}
}
......@@ -46,14 +46,14 @@ static __inline__ ide_ioreg_t
ide_default_io_base (int index)
{
switch (index) {
case 0: return 0x1f0;
case 1: return 0x170;
case 2: return 0x1e8;
case 3: return 0x168;
case 4: return 0x1e0;
case 5: return 0x160;
default:
return 0;
case 0: return 0x1f0;
case 1: return 0x170;
case 2: return 0x1e8;
case 3: return 0x168;
case 4: return 0x1e0;
case 5: return 0x160;
default:
return 0;
}
}
......
include/asm-ia64/machvec.h
View file @ 3f4533c3
......@@ -68,6 +68,8 @@ extern void machvec_noop (void);
# include <asm/machvec_hpsim.h>
# elif defined (CONFIG_IA64_DIG)
# include <asm/machvec_dig.h>
# elif defined (CONFIG_IA64_HP_ZX1)
# include <asm/machvec_hpzx1.h>
# elif defined (CONFIG_IA64_SGI_SN1)
# include <asm/machvec_sn1.h>
# elif defined (CONFIG_IA64_SGI_SN2)
......@@ -123,6 +125,7 @@ struct ia64_machine_vector {
ia64_mv_cmci_handler_t *cmci_handler;
ia64_mv_log_print_t *log_print;
ia64_mv_send_ipi_t *send_ipi;
ia64_mv_global_tlb_purge_t *global_tlb_purge;
ia64_mv_pci_dma_init *dma_init;
ia64_mv_pci_alloc_consistent *alloc_consistent;
ia64_mv_pci_free_consistent *free_consistent;
......@@ -149,6 +152,7 @@ struct ia64_machine_vector {
{ \
#name, \
platform_setup, \
platform_cpu_init, \
platform_irq_init, \
platform_pci_fixup, \
platform_map_nr, \
......
include/asm-ia64/machvec_hpzx1.h 0 → 100644
View file @ 3f4533c3
#ifndef _ASM_IA64_MACHVEC_HPZX1_h
#define _ASM_IA64_MACHVEC_HPZX1_h
extern ia64_mv_setup_t dig_setup;
extern ia64_mv_pci_fixup_t hpzx1_pci_fixup;
extern ia64_mv_map_nr_t map_nr_dense;
extern ia64_mv_pci_alloc_consistent sba_alloc_consistent;
extern ia64_mv_pci_free_consistent sba_free_consistent;
extern ia64_mv_pci_map_single sba_map_single;
extern ia64_mv_pci_unmap_single sba_unmap_single;
extern ia64_mv_pci_map_sg sba_map_sg;
extern ia64_mv_pci_unmap_sg sba_unmap_sg;
extern ia64_mv_pci_dma_address sba_dma_address;
/*
* This stuff has dual use!
*
* For a generic kernel, the macros are used to initialize the
* platform's machvec structure. When compiling a non-generic kernel,
* the macros are used directly.
*/
#define platform_name "hpzx1"
#define platform_setup dig_setup
#define platform_pci_fixup hpzx1_pci_fixup
#define platform_map_nr map_nr_dense
#define platform_pci_dma_init ((ia64_mv_pci_dma_init *) machvec_noop)
#define platform_pci_alloc_consistent sba_alloc_consistent
#define platform_pci_free_consistent sba_free_consistent
#define platform_pci_map_single sba_map_single
#define platform_pci_unmap_single sba_unmap_single
#define platform_pci_map_sg sba_map_sg
#define platform_pci_unmap_sg sba_unmap_sg
#define platform_pci_dma_sync_single ((ia64_mv_pci_dma_sync_single *) machvec_noop)
#define platform_pci_dma_sync_sg ((ia64_mv_pci_dma_sync_sg *) machvec_noop)
#define platform_pci_dma_address sba_dma_address
#endif /* _ASM_IA64_MACHVEC_HPZX1_h */
#ifndef _ASM_IA64_MACHVEC_HPZX1_h
#define _ASM_IA64_MACHVEC_HPZX1_h
extern ia64_mv_setup_t dig_setup;
extern ia64_mv_pci_fixup_t hpzx1_pci_fixup;
extern ia64_mv_map_nr_t map_nr_dense;
extern ia64_mv_pci_alloc_consistent sba_alloc_consistent;
extern ia64_mv_pci_free_consistent sba_free_consistent;
extern ia64_mv_pci_map_single sba_map_single;
extern ia64_mv_pci_unmap_single sba_unmap_single;
extern ia64_mv_pci_map_sg sba_map_sg;
extern ia64_mv_pci_unmap_sg sba_unmap_sg;
extern ia64_mv_pci_dma_address sba_dma_address;
/*
* This stuff has dual use!
*
* For a generic kernel, the macros are used to initialize the
* platform's machvec structure. When compiling a non-generic kernel,
* the macros are used directly.
*/
#define platform_name "hpzx1"
#define platform_setup dig_setup
#define platform_pci_fixup hpzx1_pci_fixup
#define platform_map_nr map_nr_dense
#define platform_pci_dma_init ((ia64_mv_pci_dma_init *) machvec_noop)
#define platform_pci_alloc_consistent sba_alloc_consistent
#define platform_pci_free_consistent sba_free_consistent
#define platform_pci_map_single sba_map_single
#define platform_pci_unmap_single sba_unmap_single
#define platform_pci_map_sg sba_map_sg
#define platform_pci_unmap_sg sba_unmap_sg
#define platform_pci_dma_sync_single ((ia64_mv_pci_dma_sync_single *) machvec_noop)
#define platform_pci_dma_sync_sg ((ia64_mv_pci_dma_sync_sg *) machvec_noop)
#define platform_pci_dma_address sba_dma_address
#endif /* _ASM_IA64_MACHVEC_HPZX1_h */
include/asm-ia64/machvec_init.h
View file @ 3f4533c3
......@@ -5,6 +5,11 @@
#include <asm/machvec.h>
extern ia64_mv_send_ipi_t ia64_send_ipi;
extern ia64_mv_global_tlb_purge_t ia64_global_tlb_purge;
extern ia64_mv_irq_desc __ia64_irq_desc;
extern ia64_mv_irq_to_vector __ia64_irq_to_vector;
extern ia64_mv_local_vector_to_irq __ia64_local_vector_to_irq;
extern ia64_mv_inb_t __ia64_inb;
extern ia64_mv_inw_t __ia64_inw;
extern ia64_mv_inl_t __ia64_inl;
......
include/asm-ia64/module.h
View file @ 3f4533c3
......@@ -51,6 +51,9 @@ ia64_module_init (struct module *mod)
return 0;
archdata = (struct archdata *)(mod->archdata_start);
if (archdata->unw_start == 0)
return 0;
/*
* Make sure the unwind pointers are sane.
*/
......
include/asm-ia64/offsets.h
View file @ 3f4533c3
......@@ -6,8 +6,8 @@
* This file was generated by arch/ia64/tools/print_offsets.awk.
*
*/
#define IA64_TASK_SIZE 3936 /* 0xf60 */
#define IA64_THREAD_INFO_SIZE 24 /* 0x18 */
#define IA64_TASK_SIZE 3952 /* 0xf70 */
#define IA64_THREAD_INFO_SIZE 32 /* 0x20 */
#define IA64_PT_REGS_SIZE 400 /* 0x190 */
#define IA64_SWITCH_STACK_SIZE 560 /* 0x230 */
#define IA64_SIGINFO_SIZE 128 /* 0x80 */
......@@ -15,7 +15,7 @@
#define SIGFRAME_SIZE 2816 /* 0xb00 */
#define UNW_FRAME_INFO_SIZE 448 /* 0x1c0 */
#define IA64_TASK_THREAD_KSP_OFFSET 1480 /* 0x5c8 */
#define IA64_TASK_THREAD_KSP_OFFSET 1496 /* 0x5d8 */
#define IA64_PT_REGS_CR_IPSR_OFFSET 0 /* 0x0 */
#define IA64_PT_REGS_CR_IIP_OFFSET 8 /* 0x8 */
#define IA64_PT_REGS_CR_IFS_OFFSET 16 /* 0x10 */
......
include/asm-ia64/pci.h
View file @ 3f4533c3
......@@ -20,6 +20,11 @@
#define PCIBIOS_MIN_IO 0x1000
#define PCIBIOS_MIN_MEM 0x10000000
void pcibios_config_init(void);
struct pci_bus * pcibios_scan_root(int seg, int bus);
extern int (*pci_config_read)(int seg, int bus, int dev, int fn, int reg, int len, u32 *value);
extern int (*pci_config_write)(int seg, int bus, int dev, int fn, int reg, int len, u32 value);
struct pci_dev;
/*
......
include/asm-ia64/percpu.h 0 → 100644
View file @ 3f4533c3
#ifndef _ASM_IA64_PERCPU_H
#define _ASM_IA64_PERCPU_H
/*
* Copyright (C) 2002 Hewlett-Packard Co
* David Mosberger-Tang <davidm@hpl.hp.com>
*/
#ifdef __ASSEMBLY__
#define THIS_CPU(var) (var) /* use this to mark accesses to per-CPU variables... */
#else /* !__ASSEMBLY__ */
#include <linux/threads.h>
extern unsigned long __per_cpu_offset[NR_CPUS];
#define per_cpu(var, cpu) (*(__typeof__(&(var))) ((void *) &(var) + __per_cpu_offset[cpu]))
#define this_cpu(var) (var)
#endif /* !__ASSEMBLY__ */
#endif /* _ASM_IA64_PERCPU_H */
include/asm-ia64/pgalloc.h
View file @ 3f4533c3
......@@ -150,7 +150,7 @@ pte_free_kernel (pte_t *pte)
free_page((unsigned long) pte);
}
extern int do_check_pgt_cache (int, int);
extern void check_pgt_cache (void);
/*
* IA-64 doesn't have any external MMU info: the page tables contain all the necessary
......@@ -177,69 +177,4 @@ update_mmu_cache (struct vm_area_struct *vma, unsigned long vaddr, pte_t pte)
set_bit(PG_arch_1, &page->flags); /* mark page as clean */
}
/*
* Now for some TLB flushing routines. This is the kind of stuff that
* can be very expensive, so try to avoid them whenever possible.
*/
/*
* Flush everything (kernel mapping may also have changed due to
* vmalloc/vfree).
*/
extern void __flush_tlb_all (void);
#ifdef CONFIG_SMP
extern void smp_flush_tlb_all (void);
# define flush_tlb_all() smp_flush_tlb_all()
#else
# define flush_tlb_all() __flush_tlb_all()
#endif
/*
* Flush a specified user mapping
*/
static inline void
flush_tlb_mm (struct mm_struct *mm)
{
if (mm) {
mm->context = 0;
if (mm == current->active_mm) {
/* This is called, e.g., as a result of exec(). */
get_new_mmu_context(mm);
reload_context(mm);
}
}
}
extern void flush_tlb_range (struct vm_area_struct *vma, unsigned long start, unsigned long end);
/*
* Page-granular tlb flush.
*/
static inline void
flush_tlb_page (struct vm_area_struct *vma, unsigned long addr)
{
#ifdef CONFIG_SMP
flush_tlb_range(vma, (addr & PAGE_MASK), (addr & PAGE_MASK) + PAGE_SIZE);
#else
if (vma->vm_mm == current->active_mm)
asm volatile ("ptc.l %0,%1" :: "r"(addr), "r"(PAGE_SHIFT << 2) : "memory");
#endif
}
/*
* Flush the TLB entries mapping the virtually mapped linear page
* table corresponding to address range [START-END).
*/
static inline void
flush_tlb_pgtables (struct mm_struct *mm, unsigned long start, unsigned long end)
{
struct vm_area_struct vma;
if (rgn_index(start) != rgn_index(end))
printk("flush_tlb_pgtables: can't flush across regions!!\n");
vma.vm_mm = mm;
flush_tlb_range(&vma, ia64_thash(start), ia64_thash(end));
}
#endif /* _ASM_IA64_PGALLOC_H */
include/asm-ia64/pgtable.h
View file @ 3f4533c3
......@@ -121,6 +121,7 @@
# ifndef __ASSEMBLY__
#include <asm/bitops.h>
#include <asm/cacheflush.h>
#include <asm/mmu_context.h>
#include <asm/processor.h>
......@@ -290,30 +291,6 @@ ia64_phys_addr_valid (unsigned long addr)
# define pgprot_writecombine(prot) __pgprot((pgprot_val(prot) & ~_PAGE_MA_MASK) | _PAGE_MA_WC)
#endif
/*
* Return the region index for virtual address ADDRESS.
*/
static inline unsigned long
rgn_index (unsigned long address)
{
ia64_va a;
a.l = address;
return a.f.reg;
}
/*
* Return the region offset for virtual address ADDRESS.
*/
static inline unsigned long
rgn_offset (unsigned long address)
{
ia64_va a;
a.l = address;
return a.f.off;
}
static inline unsigned long
pgd_index (unsigned long address)
{
......@@ -440,33 +417,6 @@ extern void paging_init (void);
#define io_remap_page_range remap_page_range /* XXX is this right? */
/*
* Now for some cache flushing routines. This is the kind of stuff that can be very
* expensive, so try to avoid them whenever possible.
*/
/* Caches aren't brain-dead on the IA-64. */
#define flush_cache_all() do { } while (0)
#define flush_cache_mm(mm) do { } while (0)
#define flush_cache_range(vma, start, end) do { } while (0)
#define flush_cache_page(vma, vmaddr) do { } while (0)
#define flush_page_to_ram(page) do { } while (0)
#define flush_icache_page(vma,page) do { } while (0)
#define flush_dcache_page(page) \
do { \
clear_bit(PG_arch_1, &page->flags); \
} while (0)
extern void flush_icache_range (unsigned long start, unsigned long end);
#define flush_icache_user_range(vma, page, user_addr, len) \
do { \
unsigned long _addr = page_address(page) + ((user_addr) & ~PAGE_MASK); \
flush_icache_range(_addr, _addr + (len)); \
} while (0)
/*
* ZERO_PAGE is a global shared page that is always zero: used
* for zero-mapped memory areas etc..
......
include/asm-ia64/processor.h
View file @ 3f4533c3
......@@ -15,7 +15,7 @@
#include <linux/config.h>
#include <linux/compiler.h>
#include <linux/percpu.h>
#include <asm/ptrace.h>
#include <asm/kregs.h>
......@@ -186,10 +186,6 @@
*/
#define IA64_USEC_PER_CYC_SHIFT 41
#define __HAVE_ARCH_PER_CPU
#define THIS_CPU(var) (var)
#ifndef __ASSEMBLY__
#include <linux/threads.h>
......@@ -202,11 +198,6 @@
#include <asm/unwind.h>
#include <asm/atomic.h>
extern unsigned long __per_cpu_offset[NR_CPUS];
#define per_cpu(var, cpu) (*(__typeof__(&(var))) ((void *) &(var) + __per_cpu_offset[cpu]))
#define this_cpu(var) (var)
/* like above but expressed as bitfields for more efficient access: */
struct ia64_psr {
__u64 reserved0 : 1;
......
include/asm-ia64/string.h
View file @ 3f4533c3
......@@ -5,8 +5,8 @@
* Here is where we want to put optimized versions of the string
* routines.
*
* Copyright (C) 1998-2000 Hewlett-Packard Co
* Copyright (C) 1998-2000 David Mosberger-Tang <davidm@hpl.hp.com>
* Copyright (C) 1998-2000, 2002 Hewlett-Packard Co
* David Mosberger-Tang <davidm@hpl.hp.com>
*/
#include <linux/config.h> /* remove this once we remove the A-step workaround... */
......@@ -17,7 +17,21 @@
#define __HAVE_ARCH_BCOPY 1 /* see arch/ia64/lib/memcpy.S */
extern __kernel_size_t strlen (const char *);
extern void *memset (void *, int, __kernel_size_t);
extern void *memcpy (void *, const void *, __kernel_size_t);
extern void *__memset_generic (void *, int, __kernel_size_t);
extern void __bzero (void *, __kernel_size_t);
#define memset(s, c, count) \
({ \
void *_s = (s); \
int _c = (c); \
__kernel_size_t _count = (count); \
\
if (__builtin_constant_p(_c) && _c == 0) \
__bzero(_s, _count); \
else \
__memset_generic(_s, _c, _count); \
})
#endif /* _ASM_IA64_STRING_H */
include/asm-ia64/system.h
View file @ 3f4533c3
......@@ -18,14 +18,6 @@
#define KERNEL_START (PAGE_OFFSET + 68*1024*1024)
/*
* The following #defines must match with vmlinux.lds.S:
*/
#define IVT_ADDR (KERNEL_START)
#define IVT_END_ADDR (KERNEL_START + 0x8000)
#define ZERO_PAGE_ADDR PAGE_ALIGN(IVT_END_ADDR)
#define SWAPPER_PGD_ADDR (ZERO_PAGE_ADDR + 1*PAGE_SIZE)
#define GATE_ADDR (0xa000000000000000 + PAGE_SIZE)
#define PERCPU_ADDR (0xa000000000000000 + 2*PAGE_SIZE)
......
include/asm-ia64/thread_info.h
View file @ 3f4533c3
......@@ -12,7 +12,10 @@
#define TI_EXEC_DOMAIN 0x00
#define TI_FLAGS 0x08
#define TI_CPU 0x0c
#define TI_ADDR_LIMI 0x10
#define TI_ADDR_LIMIT 0x10
#define TI_PRE_COUNT 0x18
#define PREEMPT_ACTIVE 0x4000000
#ifndef __ASSEMBLY__
......@@ -26,6 +29,7 @@ struct thread_info {
__u32 flags; /* thread_info flags (see TIF_*) */
__u32 cpu; /* current CPU */
mm_segment_t addr_limit; /* user-level address space limit */
__s32 preempt_count; /* 0=premptable, <0=BUG; will also serve as bh-counter */
};
#define INIT_THREAD_SIZE /* tell sched.h not to declare the thread_union */
......@@ -37,6 +41,7 @@ struct thread_info {
flags: 0, \
cpu: 0, \
addr_limit: KERNEL_DS, \
preempt_count: 0, \
}
/* how to get the thread information struct from C */
......
include/asm-ia64/tlbflush.h 0 → 100644
View file @ 3f4533c3
#ifndef _ASM_IA64_TLBFLUSH_H
#define _ASM_IA64_TLBFLUSH_H
/*
* Copyright (C) 2002 Hewlett-Packard Co
* David Mosberger-Tang <davidm@hpl.hp.com>
*/
#include <linux/config.h>
#include <linux/mm.h>
#include <asm/mmu_context.h>
#include <asm/page.h>
/*
* Now for some TLB flushing routines. This is the kind of stuff that
* can be very expensive, so try to avoid them whenever possible.
*/
/*
* Flush everything (kernel mapping may also have changed due to
* vmalloc/vfree).
*/
extern void __flush_tlb_all (void);
#ifdef CONFIG_SMP
extern void smp_flush_tlb_all (void);
# define flush_tlb_all() smp_flush_tlb_all()
#else
# define flush_tlb_all() __flush_tlb_all()
#endif
/*
* Flush a specified user mapping
*/
static inline void
flush_tlb_mm (struct mm_struct *mm)
{
if (mm) {
mm->context = 0;
if (mm == current->active_mm) {
/* This is called, e.g., as a result of exec(). */
get_new_mmu_context(mm);
reload_context(mm);
}
}
}
extern void flush_tlb_range (struct vm_area_struct *vma, unsigned long start, unsigned long end);
/*
* Page-granular tlb flush.
*/
static inline void
flush_tlb_page (struct vm_area_struct *vma, unsigned long addr)
{
#ifdef CONFIG_SMP
flush_tlb_range(vma, (addr & PAGE_MASK), (addr & PAGE_MASK) + PAGE_SIZE);
#else
if (vma->vm_mm == current->active_mm)
asm volatile ("ptc.l %0,%1" :: "r"(addr), "r"(PAGE_SHIFT << 2) : "memory");
#endif
}
/*
* Flush the TLB entries mapping the virtually mapped linear page
* table corresponding to address range [START-END).
*/
static inline void
flush_tlb_pgtables (struct mm_struct *mm, unsigned long start, unsigned long end)
{
struct vm_area_struct vma;
if (REGION_NUMBER(start) != REGION_NUMBER(end))
printk("flush_tlb_pgtables: can't flush across regions!!\n");
vma.vm_mm = mm;
flush_tlb_range(&vma, ia64_thash(start), ia64_thash(end));
}
#define flush_tlb_kernel_range(start, end) flush_tlb_all() /* XXX fix me */
#endif /* _ASM_IA64_TLBFLUSH_H */
include/asm-ia64/uaccess.h
View file @ 3f4533c3
......@@ -56,8 +56,9 @@
* address TASK_SIZE is never valid. We also need to make sure that the address doesn't
* point inside the virtually mapped linear page table.
*/
#define __access_ok(addr,size,segment) (((unsigned long) (addr)) <= (segment).seg \
&& ((segment).seg == KERNEL_DS.seg || rgn_offset((unsigned long) (addr)) < RGN_MAP_LIMIT))
#define __access_ok(addr,size,segment) (((unsigned long) (addr)) <= (segment).seg \
&& ((segment).seg == KERNEL_DS.seg \
|| REGION_OFFSET((unsigned long) (addr)) < RGN_MAP_LIMIT))
#define access_ok(type,addr,size) __access_ok((addr),(size),get_fs())
static inline int
......
include/asm-ia64/unistd.h
View file @ 3f4533c3
......@@ -219,6 +219,9 @@
#define __NR_lremovexattr 1227
#define __NR_fremovexattr 1228
#define __NR_tkill 1229
#define __NR_futex 1230
#define __NR_sched_setaffinity 1231
#define __NR_sched_getaffinity 1232
#if !defined(__ASSEMBLY__) && !defined(ASSEMBLER)
......
include/linux/acpi_serial.h
View file @ 3f4533c3
......@@ -11,6 +11,8 @@
extern void setup_serial_acpi(void *);
#define ACPI_SIG_LEN 4
/* ACPI table signatures */
#define ACPI_SPCRT_SIGNATURE "SPCR"
#define ACPI_DBGPT_SIGNATURE "DBGP"
......
include/linux/pci_ids.h
View file @ 3f4533c3
......@@ -510,6 +510,9 @@
#define PCI_DEVICE_ID_HP_DIVA1 0x1049
#define PCI_DEVICE_ID_HP_DIVA2 0x104A
#define PCI_DEVICE_ID_HP_SP2_0 0x104B
#define PCI_DEVICE_ID_HP_ZX1_SBA 0x1229
#define PCI_DEVICE_ID_HP_ZX1_IOC 0x122a
#define PCI_DEVICE_ID_HP_ZX1_LBA 0x122e
#define PCI_VENDOR_ID_PCTECH 0x1042
#define PCI_DEVICE_ID_PCTECH_RZ1000 0x1000
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7