Skip to content

L
linux
Commit 402e7b63 authored by Sean Young's avatar Sean Young Committed by Mauro Carvalho Chehab
Browse files
Options

[media] staging: sir: remove unselectable Tekram and Actisys 

Support for these sir ports is not compiled in by default, it has to
be enabled by manually defining LIRC_TEKRAM, LIRC_SIR_ACTISYS_ACT200L
or LIRC_SIR_ACTISYS_ACT220L somewhere. This cannot be done from Kconfig
at all so remove them from the driver.
Signed-off-by: default avatarSean Young <sean@mess.org>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
parent cf9ed9aa
Hide whitespace changes
Inline Side-by-side
Showing with 3 additions and 345 deletions
drivers/staging/media/lirc/lirc_sir.c
View file @ 402e7b63
/*
* LIRC SIR driver, (C) 2000 Milan Pikula <www@fornax.sk>
* IR SIR driver, (C) 2000 Milan Pikula <www@fornax.sk>
*
* sir_ir - Device driver for use with SIR (serial infra red)
* mode of IrDA on many notebooks.
......@@ -17,20 +17,6 @@
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* 2000/09/16 Frank Przybylski <mail@frankprzybylski.de> :
* added timeout and relaxed pulse detection, removed gap bug
*
* 2000/12/15 Christoph Bartelmus <lirc@bartelmus.de> :
* added support for Tekram Irmate 210 (sending does not work yet,
* kind of disappointing that nobody was able to implement that
* before),
* major clean-up
*
* 2001/02/27 Christoph Bartelmus <lirc@bartelmus.de> :
* added support for StrongARM SA1100 embedded microprocessor
* parts cut'n'pasted from sa1100_ir.c (C) 2000 Russell King
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
......@@ -61,62 +47,18 @@
#include <media/rc-core.h>
/* SECTION: Definitions */
/*** Tekram dongle ***/
#ifdef LIRC_SIR_TEKRAM
/* stolen from kernel source */
/* definitions for Tekram dongle */
#define TEKRAM_115200 0x00
#define TEKRAM_57600 0x01
#define TEKRAM_38400 0x02
#define TEKRAM_19200 0x03
#define TEKRAM_9600 0x04
#define TEKRAM_2400 0x08
#define TEKRAM_PW 0x10 /* Pulse select bit */
/* 10bit * 1s/115200bit in milliseconds = 87ms*/
#define TIME_CONST (10000000ul/115200ul)
#endif
#ifdef LIRC_SIR_ACTISYS_ACT200L
static void init_act200(void);
#elif defined(LIRC_SIR_ACTISYS_ACT220L)
static void init_act220(void);
#endif
#define PULSE '['
#ifndef LIRC_SIR_TEKRAM
/* 9bit * 1s/115200bit in milli seconds = 78.125ms*/
#define TIME_CONST (9000000ul/115200ul)
#endif
/* timeout for sequences in jiffies (=5/100s), must be longer than TIME_CONST */
#define SIR_TIMEOUT (HZ*5/100)
#ifndef LIRC_ON_SA1100
#ifndef LIRC_IRQ
#define LIRC_IRQ 4
#endif
#ifndef LIRC_PORT
/* for external dongles, default to com1 */
#if defined(LIRC_SIR_ACTISYS_ACT200L) || \
defined(LIRC_SIR_ACTISYS_ACT220L) || \
defined(LIRC_SIR_TEKRAM)
#define LIRC_PORT 0x3f8
#else
/* onboard sir ports are typically com3 */
#define LIRC_PORT 0x3e8
#endif
#endif
static int io = LIRC_PORT;
static int irq = LIRC_IRQ;
static int io = 0x3e8;
static int irq = 4;
static int threshold = 3;
#endif
static DEFINE_SPINLOCK(timer_lock);
static struct timer_list timerlist;
......@@ -392,71 +334,6 @@ static int init_hardware(void)
spin_lock_irqsave(&hardware_lock, flags);
/* reset UART */
#if defined(LIRC_SIR_TEKRAM)
/* disable FIFO */
soutp(UART_FCR,
UART_FCR_CLEAR_RCVR|
UART_FCR_CLEAR_XMIT|
UART_FCR_TRIGGER_1);
/* Set DLAB 0. */
soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
/* First of all, disable all interrupts */
soutp(UART_IER, sinp(UART_IER) &
(~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI)));
/* Set DLAB 1. */
soutp(UART_LCR, sinp(UART_LCR) | UART_LCR_DLAB);
/* Set divisor to 12 => 9600 Baud */
soutp(UART_DLM, 0);
soutp(UART_DLL, 12);
/* Set DLAB 0. */
soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
/* power supply */
soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2);
safe_udelay(50*1000);
/* -DTR low -> reset PIC */
soutp(UART_MCR, UART_MCR_RTS|UART_MCR_OUT2);
udelay(1*1000);
soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2);
udelay(100);
/* -RTS low -> send control byte */
soutp(UART_MCR, UART_MCR_DTR|UART_MCR_OUT2);
udelay(7);
soutp(UART_TX, TEKRAM_115200|TEKRAM_PW);
/* one byte takes ~1042 usec to transmit at 9600,8N1 */
udelay(1500);
/* back to normal operation */
soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2);
udelay(50);
udelay(1500);
/* read previous control byte */
pr_info("0x%02x\n", sinp(UART_RX));
/* Set DLAB 1. */
soutp(UART_LCR, sinp(UART_LCR) | UART_LCR_DLAB);
/* Set divisor to 1 => 115200 Baud */
soutp(UART_DLM, 0);
soutp(UART_DLL, 1);
/* Set DLAB 0, 8 Bit */
soutp(UART_LCR, UART_LCR_WLEN8);
/* enable interrupts */
soutp(UART_IER, sinp(UART_IER)|UART_IER_RDI);
#else
outb(0, io + UART_MCR);
outb(0, io + UART_IER);
/* init UART */
......@@ -472,12 +349,6 @@ static int init_hardware(void)
outb(UART_IER_RDI, io + UART_IER);
/* turn on UART */
outb(UART_MCR_DTR|UART_MCR_RTS|UART_MCR_OUT2, io + UART_MCR);
#ifdef LIRC_SIR_ACTISYS_ACT200L
init_act200();
#elif defined(LIRC_SIR_ACTISYS_ACT220L)
init_act220();
#endif
#endif
spin_unlock_irqrestore(&hardware_lock, flags);
return 0;
}
......@@ -526,208 +397,6 @@ static void drop_port(void)
release_region(io, 8);
}
#ifdef LIRC_SIR_ACTISYS_ACT200L
/* Crystal/Cirrus CS8130 IR transceiver, used in Actisys Act200L dongle */
/* some code borrowed from Linux IRDA driver */
/* Register 0: Control register #1 */
#define ACT200L_REG0 0x00
#define ACT200L_TXEN 0x01 /* Enable transmitter */
#define ACT200L_RXEN 0x02 /* Enable receiver */
#define ACT200L_ECHO 0x08 /* Echo control chars */
/* Register 1: Control register #2 */
#define ACT200L_REG1 0x10
#define ACT200L_LODB 0x01 /* Load new baud rate count value */
#define ACT200L_WIDE 0x04 /* Expand the maximum allowable pulse */
/* Register 3: Transmit mode register #2 */
#define ACT200L_REG3 0x30
#define ACT200L_B0 0x01 /* DataBits, 0=6, 1=7, 2=8, 3=9(8P) */
#define ACT200L_B1 0x02 /* DataBits, 0=6, 1=7, 2=8, 3=9(8P) */
#define ACT200L_CHSY 0x04 /* StartBit Synced 0=bittime, 1=startbit */
/* Register 4: Output Power register */
#define ACT200L_REG4 0x40
#define ACT200L_OP0 0x01 /* Enable LED1C output */
#define ACT200L_OP1 0x02 /* Enable LED2C output */
#define ACT200L_BLKR 0x04
/* Register 5: Receive Mode register */
#define ACT200L_REG5 0x50
#define ACT200L_RWIDL 0x01 /* fixed 1.6us pulse mode */
/*.. other various IRDA bit modes, and TV remote modes..*/
/* Register 6: Receive Sensitivity register #1 */
#define ACT200L_REG6 0x60
#define ACT200L_RS0 0x01 /* receive threshold bit 0 */
#define ACT200L_RS1 0x02 /* receive threshold bit 1 */
/* Register 7: Receive Sensitivity register #2 */
#define ACT200L_REG7 0x70
#define ACT200L_ENPOS 0x04 /* Ignore the falling edge */
/* Register 8,9: Baud Rate Divider register #1,#2 */
#define ACT200L_REG8 0x80
#define ACT200L_REG9 0x90
#define ACT200L_2400 0x5f
#define ACT200L_9600 0x17
#define ACT200L_19200 0x0b
#define ACT200L_38400 0x05
#define ACT200L_57600 0x03
#define ACT200L_115200 0x01
/* Register 13: Control register #3 */
#define ACT200L_REG13 0xd0
#define ACT200L_SHDW 0x01 /* Enable access to shadow registers */
/* Register 15: Status register */
#define ACT200L_REG15 0xf0
/* Register 21: Control register #4 */
#define ACT200L_REG21 0x50
#define ACT200L_EXCK 0x02 /* Disable clock output driver */
#define ACT200L_OSCL 0x04 /* oscillator in low power, medium accuracy mode */
static void init_act200(void)
{
int i;
__u8 control[] = {
ACT200L_REG15,
ACT200L_REG13 | ACT200L_SHDW,
ACT200L_REG21 | ACT200L_EXCK | ACT200L_OSCL,
ACT200L_REG13,
ACT200L_REG7 | ACT200L_ENPOS,
ACT200L_REG6 | ACT200L_RS0 | ACT200L_RS1,
ACT200L_REG5 | ACT200L_RWIDL,
ACT200L_REG4 | ACT200L_OP0 | ACT200L_OP1 | ACT200L_BLKR,
ACT200L_REG3 | ACT200L_B0,
ACT200L_REG0 | ACT200L_TXEN | ACT200L_RXEN,
ACT200L_REG8 | (ACT200L_115200 & 0x0f),
ACT200L_REG9 | ((ACT200L_115200 >> 4) & 0x0f),
ACT200L_REG1 | ACT200L_LODB | ACT200L_WIDE
};
/* Set DLAB 1. */
soutp(UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN8);
/* Set divisor to 12 => 9600 Baud */
soutp(UART_DLM, 0);
soutp(UART_DLL, 12);
/* Set DLAB 0. */
soutp(UART_LCR, UART_LCR_WLEN8);
/* Set divisor to 12 => 9600 Baud */
/* power supply */
soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2);
for (i = 0; i < 50; i++)
safe_udelay(1000);
/* Reset the dongle : set RTS low for 25 ms */
soutp(UART_MCR, UART_MCR_DTR|UART_MCR_OUT2);
for (i = 0; i < 25; i++)
udelay(1000);
soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2);
udelay(100);
/* Clear DTR and set RTS to enter command mode */
soutp(UART_MCR, UART_MCR_RTS|UART_MCR_OUT2);
udelay(7);
/* send out the control register settings for 115K 7N1 SIR operation */
for (i = 0; i < sizeof(control); i++) {
soutp(UART_TX, control[i]);
/* one byte takes ~1042 usec to transmit at 9600,8N1 */
udelay(1500);
}
/* back to normal operation */
soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2);
udelay(50);
udelay(1500);
soutp(UART_LCR, sinp(UART_LCR) | UART_LCR_DLAB);
/* Set DLAB 1. */
soutp(UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN7);
/* Set divisor to 1 => 115200 Baud */
soutp(UART_DLM, 0);
soutp(UART_DLL, 1);
/* Set DLAB 0. */
soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
/* Set DLAB 0, 7 Bit */
soutp(UART_LCR, UART_LCR_WLEN7);
/* enable interrupts */
soutp(UART_IER, sinp(UART_IER)|UART_IER_RDI);
}
#endif
#ifdef LIRC_SIR_ACTISYS_ACT220L
/*
* Derived from linux IrDA driver (net/irda/actisys.c)
* Drop me a mail for any kind of comment: maxx@spaceboyz.net
*/
void init_act220(void)
{
int i;
/* DLAB 1 */
soutp(UART_LCR, UART_LCR_DLAB|UART_LCR_WLEN7);
/* 9600 baud */
soutp(UART_DLM, 0);
soutp(UART_DLL, 12);
/* DLAB 0 */
soutp(UART_LCR, UART_LCR_WLEN7);
/* reset the dongle, set DTR low for 10us */
soutp(UART_MCR, UART_MCR_RTS|UART_MCR_OUT2);
udelay(10);
/* back to normal (still 9600) */
soutp(UART_MCR, UART_MCR_DTR|UART_MCR_RTS|UART_MCR_OUT2);
/*
* send RTS pulses until we reach 115200
* i hope this is really the same for act220l/act220l+
*/
for (i = 0; i < 3; i++) {
udelay(10);
/* set RTS low for 10 us */
soutp(UART_MCR, UART_MCR_DTR|UART_MCR_OUT2);
udelay(10);
/* set RTS high for 10 us */
soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2);
}
/* back to normal operation */
udelay(1500); /* better safe than sorry ;) */
/* Set DLAB 1. */
soutp(UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN7);
/* Set divisor to 1 => 115200 Baud */
soutp(UART_DLM, 0);
soutp(UART_DLL, 1);
/* Set DLAB 0, 7 Bit */
/* The dongle doesn't seem to have any problems with operation at 7N1 */
soutp(UART_LCR, UART_LCR_WLEN7);
/* enable interrupts */
soutp(UART_IER, UART_IER_RDI);
}
#endif
static int init_sir_ir(void)
{
int retval;
......@@ -809,19 +478,8 @@ static void __exit sir_ir_exit(void)
module_init(sir_ir_init);
module_exit(sir_ir_exit);
#ifdef LIRC_SIR_TEKRAM
MODULE_DESCRIPTION("Infrared receiver driver for Tekram Irmate 210");
MODULE_AUTHOR("Christoph Bartelmus");
#elif defined(LIRC_SIR_ACTISYS_ACT200L)
MODULE_DESCRIPTION("LIRC driver for Actisys Act200L");
MODULE_AUTHOR("Karl Bongers");
#elif defined(LIRC_SIR_ACTISYS_ACT220L)
MODULE_DESCRIPTION("LIRC driver for Actisys Act220L(+)");
MODULE_AUTHOR("Jan Roemisch");
#else
MODULE_DESCRIPTION("Infrared receiver driver for SIR type serial ports");
MODULE_AUTHOR("Milan Pikula");
#endif
MODULE_LICENSE("GPL");
module_param(io, int, 0444);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7