Commit 406cc9cd authored by Thomas Kopp's avatar Thomas Kopp Committed by Marc Kleine-Budde

can: mcp251xfd: mcp251xfd_regmap_crc_read(): improve workaround handling for mcp2517fd

The mcp251xfd compatible chips have an erratum ([1], [2]), where the
received CRC doesn't match the calculated CRC. In commit
c7eb923c ("can: mcp251xfd: mcp251xfd_regmap_crc_read(): work
around broken CRC on TBC register") the following workaround was
implementierend.

- If a CRC read error on the TBC register is detected and the first
  byte is 0x00 or 0x80, the most significant bit of the first byte is
  flipped and the CRC is calculated again.
- If the CRC now matches, the _original_ data is passed to the reader.
  For now we assume transferred data was OK.

Measurements on the mcp2517fd show that the workaround is applicable
not only of the lowest byte is 0x00 or 0x80, but also if 3 least
significant bits are set.

Update check on 1st data byte and workaround description accordingly.

[1] mcp2517fd: DS80000792C: "Incorrect CRC for certain READ_CRC commands"
[2] mcp2518fd: DS80000789C: "Incorrect CRC for certain READ_CRC commands"

Link: https://lore.kernel.org/all/DM4PR11MB53901D49578FE265B239E55AFB7C9@DM4PR11MB5390.namprd11.prod.outlook.com
Fixes: c7eb923c ("can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register")
Cc: stable@vger.kernel.org
Reported-by: default avatarPavel Modilaynen <pavel.modilaynen@volvocars.com>
Signed-off-by: default avatarThomas Kopp <thomas.kopp@microchip.com>
[mkl: split into 2 patches, update patch description and documentation]
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
parent b3b6df2c
......@@ -334,10 +334,12 @@ mcp251xfd_regmap_crc_read(void *context,
* register. It increments once per SYS clock tick,
* which is 20 or 40 MHz.
*
* Observation shows that if the lowest byte (which is
* transferred first on the SPI bus) of that register
* is 0x00 or 0x80 the calculated CRC doesn't always
* match the transferred one.
* Observation on the mcp2518fd shows that if the
* lowest byte (which is transferred first on the SPI
* bus) of that register is 0x00 or 0x80 the
* calculated CRC doesn't always match the transferred
* one. On the mcp2517fd this problem is not limited
* to the first byte being 0x00 or 0x80.
*
* If the highest bit in the lowest byte is flipped
* the transferred CRC matches the calculated one. We
......@@ -346,7 +348,8 @@ mcp251xfd_regmap_crc_read(void *context,
* correct.
*/
if (reg == MCP251XFD_REG_TBC &&
(buf_rx->data[0] == 0x0 || buf_rx->data[0] == 0x80)) {
((buf_rx->data[0] & 0xf8) == 0x0 ||
(buf_rx->data[0] & 0xf8) == 0x80)) {
/* Flip highest bit in lowest byte of le32 */
buf_rx->data[0] ^= 0x80;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment