batman-adv: use inline kernel-doc for uapi constants

The enums of constants for netlink tends to become rather large over time.
Documenting them is easier when the kernel-doc is actually next to constant
and not in a different block above the enum.

Also inline kernel-doc allows multi-paragraph description. This could be
required to better document the netlink command types and the expected
return values.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

include/uapi/linux/batman_adv.h

@@ -24,20 +24,6 @@
 
 /**
  * enum batadv_tt_client_flags - TT client specific flags
- * @BATADV_TT_CLIENT_DEL: the client has to be deleted from the table
- * @BATADV_TT_CLIENT_ROAM: the client roamed to/from another node and the new
- *  update telling its new real location has not been received/sent yet
- * @BATADV_TT_CLIENT_WIFI: this client is connected through a wifi interface.
- *  This information is used by the "AP Isolation" feature
- * @BATADV_TT_CLIENT_ISOLA: this client is considered "isolated". This
- *  information is used by the Extended Isolation feature
- * @BATADV_TT_CLIENT_NOPURGE: this client should never be removed from the table
- * @BATADV_TT_CLIENT_NEW: this client has been added to the local table but has
- *  not been announced yet
- * @BATADV_TT_CLIENT_PENDING: this client is marked for removal but it is kept
- *  in the table for one more originator interval for consistency purposes
- * @BATADV_TT_CLIENT_TEMP: this global client has been detected to be part of
- *  the network but no nnode has already announced it
  *
  * Bits from 0 to 7 are called _remote flags_ because they are sent on the wire.
  * Bits from 8 to 15 are called _local flags_ because they are used for local
@@ -48,160 +34,385 @@
  * in the TT CRC computation.
  */
 enum batadv_tt_client_flags {
+	/**
+	 * @BATADV_TT_CLIENT_DEL: the client has to be deleted from the table
+	 */
 	BATADV_TT_CLIENT_DEL     = (1 << 0),
+
+	/**
+	 * @BATADV_TT_CLIENT_ROAM: the client roamed to/from another node and
+	 * the new update telling its new real location has not been
+	 * received/sent yet
+	 */
 	BATADV_TT_CLIENT_ROAM    = (1 << 1),
+
+	/**
+	 * @BATADV_TT_CLIENT_WIFI: this client is connected through a wifi
+	 * interface. This information is used by the "AP Isolation" feature
+	 */
 	BATADV_TT_CLIENT_WIFI    = (1 << 4),
+
+	/**
+	 * @BATADV_TT_CLIENT_ISOLA: this client is considered "isolated". This
+	 * information is used by the Extended Isolation feature
+	 */
 	BATADV_TT_CLIENT_ISOLA	 = (1 << 5),
+
+	/**
+	 * @BATADV_TT_CLIENT_NOPURGE: this client should never be removed from
+	 * the table
+	 */
 	BATADV_TT_CLIENT_NOPURGE = (1 << 8),
+
+	/**
+	 * @BATADV_TT_CLIENT_NEW: this client has been added to the local table
+	 * but has not been announced yet
+	 */
 	BATADV_TT_CLIENT_NEW     = (1 << 9),
+
+	/**
+	 * @BATADV_TT_CLIENT_PENDING: this client is marked for removal but it
+	 * is kept in the table for one more originator interval for consistency
+	 * purposes
+	 */
 	BATADV_TT_CLIENT_PENDING = (1 << 10),
+
+	/**
+	 * @BATADV_TT_CLIENT_TEMP: this global client has been detected to be
+	 * part of the network but no nnode has already announced it
+	 */
 	BATADV_TT_CLIENT_TEMP	 = (1 << 11),
 };
 
 /**
  * enum batadv_nl_attrs - batman-adv netlink attributes
- *
- * @BATADV_ATTR_UNSPEC: unspecified attribute to catch errors
- * @BATADV_ATTR_VERSION: batman-adv version string
- * @BATADV_ATTR_ALGO_NAME: name of routing algorithm
- * @BATADV_ATTR_MESH_IFINDEX: index of the batman-adv interface
- * @BATADV_ATTR_MESH_IFNAME: name of the batman-adv interface
- * @BATADV_ATTR_MESH_ADDRESS: mac address of the batman-adv interface
- * @BATADV_ATTR_HARD_IFINDEX: index of the non-batman-adv interface
- * @BATADV_ATTR_HARD_IFNAME: name of the non-batman-adv interface
- * @BATADV_ATTR_HARD_ADDRESS: mac address of the non-batman-adv interface
- * @BATADV_ATTR_ORIG_ADDRESS: originator mac address
- * @BATADV_ATTR_TPMETER_RESULT: result of run (see batadv_tp_meter_status)
- * @BATADV_ATTR_TPMETER_TEST_TIME: time (msec) the run took
- * @BATADV_ATTR_TPMETER_BYTES: amount of acked bytes during run
- * @BATADV_ATTR_TPMETER_COOKIE: session cookie to match tp_meter session
- * @BATADV_ATTR_PAD: attribute used for padding for 64-bit alignment
- * @BATADV_ATTR_ACTIVE: Flag indicating if the hard interface is active
- * @BATADV_ATTR_TT_ADDRESS: Client MAC address
- * @BATADV_ATTR_TT_TTVN: Translation table version
- * @BATADV_ATTR_TT_LAST_TTVN: Previous translation table version
- * @BATADV_ATTR_TT_CRC32: CRC32 over translation table
- * @BATADV_ATTR_TT_VID: VLAN ID
- * @BATADV_ATTR_TT_FLAGS: Translation table client flags
- * @BATADV_ATTR_FLAG_BEST: Flags indicating entry is the best
- * @BATADV_ATTR_LAST_SEEN_MSECS: Time in milliseconds since last seen
- * @BATADV_ATTR_NEIGH_ADDRESS: Neighbour MAC address
- * @BATADV_ATTR_TQ: TQ to neighbour
- * @BATADV_ATTR_THROUGHPUT: Estimated throughput to Neighbour
- * @BATADV_ATTR_BANDWIDTH_UP: Reported uplink bandwidth
- * @BATADV_ATTR_BANDWIDTH_DOWN: Reported downlink bandwidth
- * @BATADV_ATTR_ROUTER: Gateway router MAC address
- * @BATADV_ATTR_BLA_OWN: Flag indicating own originator
- * @BATADV_ATTR_BLA_ADDRESS: Bridge loop avoidance claim MAC address
- * @BATADV_ATTR_BLA_VID: BLA VLAN ID
- * @BATADV_ATTR_BLA_BACKBONE: BLA gateway originator MAC address
- * @BATADV_ATTR_BLA_CRC: BLA CRC
- * @__BATADV_ATTR_AFTER_LAST: internal use
- * @NUM_BATADV_ATTR: total number of batadv_nl_attrs available
- * @BATADV_ATTR_MAX: highest attribute number currently defined
  */
 enum batadv_nl_attrs {
+	/**
+	 * @BATADV_ATTR_UNSPEC: unspecified attribute to catch errors
+	 */
 	BATADV_ATTR_UNSPEC,
+
+	/**
+	 * @BATADV_ATTR_VERSION: batman-adv version string
+	 */
 	BATADV_ATTR_VERSION,
+
+	/**
+	 * @BATADV_ATTR_ALGO_NAME: name of routing algorithm
+	 */
 	BATADV_ATTR_ALGO_NAME,
+
+	/**
+	 * @BATADV_ATTR_MESH_IFINDEX: index of the batman-adv interface
+	 */
 	BATADV_ATTR_MESH_IFINDEX,
+
+	/**
+	 * @BATADV_ATTR_MESH_IFNAME: name of the batman-adv interface
+	 */
 	BATADV_ATTR_MESH_IFNAME,
+
+	/**
+	 * @BATADV_ATTR_MESH_ADDRESS: mac address of the batman-adv interface
+	 */
 	BATADV_ATTR_MESH_ADDRESS,
+
+	/**
+	 * @BATADV_ATTR_HARD_IFINDEX: index of the non-batman-adv interface
+	 */
 	BATADV_ATTR_HARD_IFINDEX,
+
+	/**
+	 * @BATADV_ATTR_HARD_IFNAME: name of the non-batman-adv interface
+	 */
 	BATADV_ATTR_HARD_IFNAME,
+
+	/**
+	 * @BATADV_ATTR_HARD_ADDRESS: mac address of the non-batman-adv
+	 * interface
+	 */
 	BATADV_ATTR_HARD_ADDRESS,
+
+	/**
+	 * @BATADV_ATTR_ORIG_ADDRESS: originator mac address
+	 */
 	BATADV_ATTR_ORIG_ADDRESS,
+
+	/**
+	 * @BATADV_ATTR_TPMETER_RESULT: result of run (see
+	 * batadv_tp_meter_status)
+	 */
 	BATADV_ATTR_TPMETER_RESULT,
+
+	/**
+	 * @BATADV_ATTR_TPMETER_TEST_TIME: time (msec) the run took
+	 */
 	BATADV_ATTR_TPMETER_TEST_TIME,
+
+	/**
+	 * @BATADV_ATTR_TPMETER_BYTES: amount of acked bytes during run
+	 */
 	BATADV_ATTR_TPMETER_BYTES,
+
+	/**
+	 * @BATADV_ATTR_TPMETER_COOKIE: session cookie to match tp_meter session
+	 */
 	BATADV_ATTR_TPMETER_COOKIE,
+
+	/**
+	 * @BATADV_ATTR_PAD: attribute used for padding for 64-bit alignment
+	 */
 	BATADV_ATTR_PAD,
+
+	/**
+	 * @BATADV_ATTR_ACTIVE: Flag indicating if the hard interface is active
+	 */
 	BATADV_ATTR_ACTIVE,
+
+	/**
+	 * @BATADV_ATTR_TT_ADDRESS: Client MAC address
+	 */
 	BATADV_ATTR_TT_ADDRESS,
+
+	/**
+	 * @BATADV_ATTR_TT_TTVN: Translation table version
+	 */
 	BATADV_ATTR_TT_TTVN,
+
+	/**
+	 * @BATADV_ATTR_TT_LAST_TTVN: Previous translation table version
+	 */
 	BATADV_ATTR_TT_LAST_TTVN,
+
+	/**
+	 * @BATADV_ATTR_TT_CRC32: CRC32 over translation table
+	 */
 	BATADV_ATTR_TT_CRC32,
+
+	/**
+	 * @BATADV_ATTR_TT_VID: VLAN ID
+	 */
 	BATADV_ATTR_TT_VID,
+
+	/**
+	 * @BATADV_ATTR_TT_FLAGS: Translation table client flags
+	 */
 	BATADV_ATTR_TT_FLAGS,
+
+	/**
+	 * @BATADV_ATTR_FLAG_BEST: Flags indicating entry is the best
+	 */
 	BATADV_ATTR_FLAG_BEST,
+
+	/**
+	 * @BATADV_ATTR_LAST_SEEN_MSECS: Time in milliseconds since last seen
+	 */
 	BATADV_ATTR_LAST_SEEN_MSECS,
+
+	/**
+	 * @BATADV_ATTR_NEIGH_ADDRESS: Neighbour MAC address
+	 */
 	BATADV_ATTR_NEIGH_ADDRESS,
+
+	/**
+	 * @BATADV_ATTR_TQ: TQ to neighbour
+	 */
 	BATADV_ATTR_TQ,
+
+	/**
+	 * @BATADV_ATTR_THROUGHPUT: Estimated throughput to Neighbour
+	 */
 	BATADV_ATTR_THROUGHPUT,
+
+	/**
+	 * @BATADV_ATTR_BANDWIDTH_UP: Reported uplink bandwidth
+	 */
 	BATADV_ATTR_BANDWIDTH_UP,
+
+	/**
+	 * @BATADV_ATTR_BANDWIDTH_DOWN: Reported downlink bandwidth
+	 */
 	BATADV_ATTR_BANDWIDTH_DOWN,
+
+	/**
+	 * @BATADV_ATTR_ROUTER: Gateway router MAC address
+	 */
 	BATADV_ATTR_ROUTER,
+
+	/**
+	 * @BATADV_ATTR_BLA_OWN: Flag indicating own originator
+	 */
 	BATADV_ATTR_BLA_OWN,
+
+	/**
+	 * @BATADV_ATTR_BLA_ADDRESS: Bridge loop avoidance claim MAC address
+	 */
 	BATADV_ATTR_BLA_ADDRESS,
+
+	/**
+	 * @BATADV_ATTR_BLA_VID: BLA VLAN ID
+	 */
 	BATADV_ATTR_BLA_VID,
+
+	/**
+	 * @BATADV_ATTR_BLA_BACKBONE: BLA gateway originator MAC address
+	 */
 	BATADV_ATTR_BLA_BACKBONE,
+
+	/**
+	 * @BATADV_ATTR_BLA_CRC: BLA CRC
+	 */
 	BATADV_ATTR_BLA_CRC,
+
 	/* add attributes above here, update the policy in netlink.c */
+
+	/**
+	 * @__BATADV_ATTR_AFTER_LAST: internal use
+	 */
 	__BATADV_ATTR_AFTER_LAST,
+
+	/**
+	 * @NUM_BATADV_ATTR: total number of batadv_nl_attrs available
+	 */
 	NUM_BATADV_ATTR = __BATADV_ATTR_AFTER_LAST,
+
+	/**
+	 * @BATADV_ATTR_MAX: highest attribute number currently defined
+	 */
 	BATADV_ATTR_MAX = __BATADV_ATTR_AFTER_LAST - 1
 };
 
 /**
  * enum batadv_nl_commands - supported batman-adv netlink commands
- *
- * @BATADV_CMD_UNSPEC: unspecified command to catch errors
- * @BATADV_CMD_GET_MESH_INFO: Query basic information about batman-adv device
- * @BATADV_CMD_TP_METER: Start a tp meter session
- * @BATADV_CMD_TP_METER_CANCEL: Cancel a tp meter session
- * @BATADV_CMD_GET_ROUTING_ALGOS: Query the list of routing algorithms.
- * @BATADV_CMD_GET_HARDIFS: Query list of hard interfaces
- * @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations
- * @BATADV_CMD_GET_TRANSTABLE_GLOBAL Query list of global translations
- * @BATADV_CMD_GET_ORIGINATORS: Query list of originators
- * @BATADV_CMD_GET_NEIGHBORS: Query list of neighbours
- * @BATADV_CMD_GET_GATEWAYS: Query list of gateways
- * @BATADV_CMD_GET_BLA_CLAIM: Query list of bridge loop avoidance claims
- * @BATADV_CMD_GET_BLA_BACKBONE: Query list of bridge loop avoidance backbones
- * @__BATADV_CMD_AFTER_LAST: internal use
- * @BATADV_CMD_MAX: highest used command number
  */
 enum batadv_nl_commands {
+	/**
+	 * @BATADV_CMD_UNSPEC: unspecified command to catch errors
+	 */
 	BATADV_CMD_UNSPEC,
+
+	/**
+	 * @BATADV_CMD_GET_MESH_INFO: Query basic information about batman-adv
+	 * device
+	 */
 	BATADV_CMD_GET_MESH_INFO,
+
+	/**
+	 * @BATADV_CMD_TP_METER: Start a tp meter session
+	 */
 	BATADV_CMD_TP_METER,
+
+	/**
+	 * @BATADV_CMD_TP_METER_CANCEL: Cancel a tp meter session
+	 */
 	BATADV_CMD_TP_METER_CANCEL,
+
+	/**
+	 * @BATADV_CMD_GET_ROUTING_ALGOS: Query the list of routing algorithms.
+	 */
 	BATADV_CMD_GET_ROUTING_ALGOS,
+
+	/**
+	 * @BATADV_CMD_GET_HARDIFS: Query list of hard interfaces
+	 */
 	BATADV_CMD_GET_HARDIFS,
+
+	/**
+	 * @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations
+	 */
 	BATADV_CMD_GET_TRANSTABLE_LOCAL,
+
+	/**
+	 * @BATADV_CMD_GET_TRANSTABLE_GLOBAL: Query list of global translations
+	 */
 	BATADV_CMD_GET_TRANSTABLE_GLOBAL,
+
+	/**
+	 * @BATADV_CMD_GET_ORIGINATORS: Query list of originators
+	 */
 	BATADV_CMD_GET_ORIGINATORS,
+
+	/**
+	 * @BATADV_CMD_GET_NEIGHBORS: Query list of neighbours
+	 */
 	BATADV_CMD_GET_NEIGHBORS,
+
+	/**
+	 * @BATADV_CMD_GET_GATEWAYS: Query list of gateways
+	 */
 	BATADV_CMD_GET_GATEWAYS,
+
+	/**
+	 * @BATADV_CMD_GET_BLA_CLAIM: Query list of bridge loop avoidance claims
+	 */
 	BATADV_CMD_GET_BLA_CLAIM,
+
+	/**
+	 * @BATADV_CMD_GET_BLA_BACKBONE: Query list of bridge loop avoidance
+	 * backbones
+	 */
 	BATADV_CMD_GET_BLA_BACKBONE,
+
 	/* add new commands above here */
+
+	/**
+	 * @__BATADV_CMD_AFTER_LAST: internal use
+	 */
 	__BATADV_CMD_AFTER_LAST,
+
+	/**
+	 * @BATADV_CMD_MAX: highest used command number
+	 */
 	BATADV_CMD_MAX = __BATADV_CMD_AFTER_LAST - 1
 };
 
 /**
  * enum batadv_tp_meter_reason - reason of a tp meter test run stop
- * @BATADV_TP_REASON_COMPLETE: sender finished tp run
- * @BATADV_TP_REASON_CANCEL: sender was stopped during run
- * @BATADV_TP_REASON_DST_UNREACHABLE: receiver could not be reached or didn't
- *  answer
- * @BATADV_TP_REASON_RESEND_LIMIT: (unused) sender retry reached limit
- * @BATADV_TP_REASON_ALREADY_ONGOING: test to or from the same node already
- *  ongoing
- * @BATADV_TP_REASON_MEMORY_ERROR: test was stopped due to low memory
- * @BATADV_TP_REASON_CANT_SEND: failed to send via outgoing interface
- * @BATADV_TP_REASON_TOO_MANY: too many ongoing sessions
  */
 enum batadv_tp_meter_reason {
+	/**
+	 * @BATADV_TP_REASON_COMPLETE: sender finished tp run
+	 */
 	BATADV_TP_REASON_COMPLETE		= 3,
+
+	/**
+	 * @BATADV_TP_REASON_CANCEL: sender was stopped during run
+	 */
 	BATADV_TP_REASON_CANCEL			= 4,
+
 	/* error status >= 128 */
+
+	/**
+	 * @BATADV_TP_REASON_DST_UNREACHABLE: receiver could not be reached or
+	 * didn't answer
+	 */
 	BATADV_TP_REASON_DST_UNREACHABLE	= 128,
+
+	/**
+	 * @BATADV_TP_REASON_RESEND_LIMIT: (unused) sender retry reached limit
+	 */
 	BATADV_TP_REASON_RESEND_LIMIT		= 129,
+
+	/**
+	 * @BATADV_TP_REASON_ALREADY_ONGOING: test to or from the same node
+	 * already ongoing
+	 */
 	BATADV_TP_REASON_ALREADY_ONGOING	= 130,
+
+	/**
+	 * @BATADV_TP_REASON_MEMORY_ERROR: test was stopped due to low memory
+	 */
 	BATADV_TP_REASON_MEMORY_ERROR		= 131,
+
+	/**
+	 * @BATADV_TP_REASON_CANT_SEND: failed to send via outgoing interface
+	 */
 	BATADV_TP_REASON_CANT_SEND		= 132,
+
+	/**
+	 * @BATADV_TP_REASON_TOO_MANY: too many ongoing sessions
+	 */
 	BATADV_TP_REASON_TOO_MANY		= 133,
 };