staging: rtl8188eu: use common ieee80211 constants

Many defined constants in wifi.h are unused and/or available from
<linux/ieee80211.h>, some with slightly different names. Use the
common ones, rename where necessary and remove unused.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20200701182957.7932-1-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8188eu/core/rtw_ap.c

@@ -535,7 +535,7 @@ void update_sta_info_apmode(struct adapter *padapter, struct sta_info *psta)
 		/*  bwmode */
 		if (le16_to_cpu(phtpriv_sta->ht_cap.cap_info &
 				phtpriv_ap->ht_cap.cap_info) &
-		    IEEE80211_HT_CAP_SUP_WIDTH) {
+		    IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
 			phtpriv_sta->bwmode = pmlmeext->cur_bwmode;
 			phtpriv_sta->ch_offset = pmlmeext->cur_ch_offset;
 		}
@@ -925,12 +925,12 @@ int rtw_check_beacon_data(struct adapter *padapter, u8 *pbuf,  int len)
 
 		if ((psecuritypriv->wpa_pairwise_cipher & WPA_CIPHER_CCMP) ||
 		    (psecuritypriv->wpa2_pairwise_cipher & WPA_CIPHER_CCMP))
-			pht_cap->ampdu_params_info |= (IEEE80211_HT_CAP_AMPDU_DENSITY & (0x07 << 2));
+			pht_cap->ampdu_params_info |= (IEEE80211_HT_AMPDU_PARM_DENSITY & (0x07 << 2));
 		else
-			pht_cap->ampdu_params_info |= (IEEE80211_HT_CAP_AMPDU_DENSITY & 0x00);
+			pht_cap->ampdu_params_info |= (IEEE80211_HT_AMPDU_PARM_DENSITY & 0x00);
 
 		/* set  Max Rx AMPDU size  to 64K */
-		pht_cap->ampdu_params_info |= (IEEE80211_HT_CAP_AMPDU_FACTOR & 0x03);
+		pht_cap->ampdu_params_info |= (IEEE80211_HT_AMPDU_PARM_FACTOR & 0x03);
 
 		pht_cap->mcs.rx_mask[0] = 0xff;
 		pht_cap->mcs.rx_mask[1] = 0x0;
@@ -1307,7 +1307,7 @@ static int rtw_ht_operation_update(struct adapter *padapter)
 	    (pmlmepriv->ht_op_mode & HT_INFO_OPERATION_MODE_NON_GF_DEVS_PRESENT))
 		new_op_mode = OP_MODE_MIXED;
 	else if ((le16_to_cpu(phtpriv_ap->ht_cap.cap_info) &
-		  IEEE80211_HT_CAP_SUP_WIDTH) &&
+		  IEEE80211_HT_CAP_SUP_WIDTH_20_40) &&
 		 pmlmepriv->num_sta_ht_20mhz)
 		new_op_mode = OP_MODE_20MHZ_HT_STA_ASSOCED;
 	else if (pmlmepriv->olbc_ht)
@@ -1457,7 +1457,7 @@ void bss_cap_update_on_sta_join(struct adapter *padapter, struct sta_info *psta)
 				pmlmepriv->num_sta_ht_no_gf);
 		}
 
-		if ((ht_capab & IEEE80211_HT_CAP_SUP_WIDTH) == 0) {
+		if ((ht_capab & IEEE80211_HT_CAP_SUP_WIDTH_20_40) == 0) {
 			if (!psta->ht_20mhz_set) {
 				psta->ht_20mhz_set = 1;
 				pmlmepriv->num_sta_ht_20mhz++;

drivers/staging/rtl8188eu/core/rtw_mlme.c

@@ -1882,7 +1882,7 @@ unsigned int rtw_restructure_ht_ie(struct adapter *padapter, u8 *in_ie, u8 *out_
 
 		memset(&ht_cap, 0, sizeof(struct ieee80211_ht_cap));
 
-		ht_cap.cap_info = cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH |
+		ht_cap.cap_info = cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
 					      IEEE80211_HT_CAP_SGI_20 |
 					      IEEE80211_HT_CAP_SGI_40 |
 					      IEEE80211_HT_CAP_TX_STBC |
@@ -1900,9 +1900,9 @@ unsigned int rtw_restructure_ht_ie(struct adapter *padapter, u8 *in_ie, u8 *out_
 		ht_cap.ampdu_params_info = max_rx_ampdu_factor & 0x03;
 
 		if (padapter->securitypriv.dot11PrivacyAlgrthm == _AES_)
-			ht_cap.ampdu_params_info |= IEEE80211_HT_CAP_AMPDU_DENSITY & (0x07 << 2);
+			ht_cap.ampdu_params_info |= IEEE80211_HT_AMPDU_PARM_DENSITY & (0x07 << 2);
 		else
-			ht_cap.ampdu_params_info |= IEEE80211_HT_CAP_AMPDU_DENSITY & 0x00;
+			ht_cap.ampdu_params_info |= IEEE80211_HT_AMPDU_PARM_DENSITY & 0x00;
 
 		rtw_set_ie(out_ie + out_len, _HT_CAPABILITY_IE_,
 			   sizeof(struct ieee80211_ht_cap),

drivers/staging/rtl8188eu/include/wifi.h

@@ -499,52 +499,6 @@ enum ht_cap_ampdu_factor {
 	MAX_AMPDU_FACTOR_64K	= 3,
 };
 
-/* 802.11n HT capabilities masks */
-#define IEEE80211_HT_CAP_SUP_WIDTH		0x0002
-#define IEEE80211_HT_CAP_SM_PS			0x000C
-#define IEEE80211_HT_CAP_GRN_FLD		0x0010
-#define IEEE80211_HT_CAP_SGI_20			0x0020
-#define IEEE80211_HT_CAP_SGI_40			0x0040
-#define IEEE80211_HT_CAP_TX_STBC		0x0080
-#define IEEE80211_HT_CAP_RX_STBC		0x0300
-#define IEEE80211_HT_CAP_DELAY_BA		0x0400
-#define IEEE80211_HT_CAP_MAX_AMSDU		0x0800
-#define IEEE80211_HT_CAP_DSSSCCK40		0x1000
-/* 802.11n HT capability AMPDU settings */
-#define IEEE80211_HT_CAP_AMPDU_FACTOR		0x03
-#define IEEE80211_HT_CAP_AMPDU_DENSITY		0x1C
-/* 802.11n HT capability MSC set */
-#define IEEE80211_SUPP_MCS_SET_UEQM		4
-#define IEEE80211_HT_CAP_MAX_STREAMS		4
-#define IEEE80211_SUPP_MCS_SET_LEN		10
-/* maximum streams the spec allows */
-#define IEEE80211_HT_CAP_MCS_TX_DEFINED		0x01
-#define IEEE80211_HT_CAP_MCS_TX_RX_DIFF		0x02
-#define IEEE80211_HT_CAP_MCS_TX_STREAMS		0x0C
-#define IEEE80211_HT_CAP_MCS_TX_UEQM		0x10
-/* 802.11n HT IE masks */
-#define IEEE80211_HT_IE_CHA_SEC_OFFSET		0x03
-#define IEEE80211_HT_IE_CHA_SEC_NONE		0x00
-#define IEEE80211_HT_IE_CHA_SEC_ABOVE		0x01
-#define IEEE80211_HT_IE_CHA_SEC_BELOW		0x03
-#define IEEE80211_HT_IE_CHA_WIDTH		0x04
-#define IEEE80211_HT_IE_HT_PROTECTION		0x0003
-#define IEEE80211_HT_IE_NON_GF_STA_PRSNT	0x0004
-#define IEEE80211_HT_IE_NON_HT_STA_PRSNT	0x0010
-
-/* block-ack parameters */
-#define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002
-#define IEEE80211_ADDBA_PARAM_TID_MASK 0x003C
-#define RTW_IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFC0
-#define IEEE80211_DELBA_PARAM_TID_MASK 0xF000
-#define IEEE80211_DELBA_PARAM_INITIATOR_MASK 0x0800
-
-/*
- * A-PMDU buffer sizes
- * According to IEEE802.11n spec size varies from 8K to 64K (in powers of 2)
- */
-#define IEEE80211_MIN_AMPDU_BUF 0x8
-
 #define OP_MODE_PURE                    0
 #define OP_MODE_MAY_BE_LEGACY_STAS      1
 #define OP_MODE_20MHZ_HT_STA_ASSOCED    2

drivers/staging/rtl8188eu/os_dep/ioctl_linux.c

@@ -129,7 +129,7 @@ static char *translate_scan(struct adapter *padapter,
 		pht_capie = (struct ieee80211_ht_cap *)(p + 2);
 		memcpy(&mcs_rate, pht_capie->mcs.rx_mask, 2);
 		bw_40MHz = !!(le16_to_cpu(pht_capie->cap_info) &
-			      IEEE80211_HT_CAP_SUP_WIDTH);
+			      IEEE80211_HT_CAP_SUP_WIDTH_20_40);
 		short_GI = !!(le16_to_cpu(pht_capie->cap_info) &
 			      (IEEE80211_HT_CAP_SGI_20 |
 			       IEEE80211_HT_CAP_SGI_40));