Commit 4134361a authored by Chris Bagwell's avatar Chris Bagwell Committed by Dmitry Torokhov

Input: wacom - read 3rd gen Bamboo Touch HID data

Override invalid pen based pktlen and x/y_max with touch
values from HID report.

Since active area of pen and touch are same on these
devices, set physical x/y size while pen x/y_max and
resolution are still valid.
Signed-off-by: default avatarChris Bagwell <chris@cnpbagwell.com>
Acked-by: default avatarPing Cheng <pingc@wacom.com>
Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
parent c5981411
...@@ -28,7 +28,9 @@ ...@@ -28,7 +28,9 @@
#define HID_USAGE_Y_TILT 0x3e #define HID_USAGE_Y_TILT 0x3e
#define HID_USAGE_FINGER 0x22 #define HID_USAGE_FINGER 0x22
#define HID_USAGE_STYLUS 0x20 #define HID_USAGE_STYLUS 0x20
#define HID_COLLECTION 0xc0 #define HID_COLLECTION 0xa1
#define HID_COLLECTION_LOGICAL 0x02
#define HID_COLLECTION_END 0xc0
enum { enum {
WCM_UNDEFINED = 0, WCM_UNDEFINED = 0,
...@@ -165,6 +167,35 @@ static void wacom_close(struct input_dev *dev) ...@@ -165,6 +167,35 @@ static void wacom_close(struct input_dev *dev)
usb_autopm_put_interface(wacom->intf); usb_autopm_put_interface(wacom->intf);
} }
static int wacom_parse_logical_collection(unsigned char *report,
struct wacom_features *features)
{
int length = 0;
if (features->type == BAMBOO_PT) {
/* Logical collection is only used by 3rd gen Bamboo Touch */
features->pktlen = WACOM_PKGLEN_BBTOUCH3;
features->device_type = BTN_TOOL_DOUBLETAP;
/*
* Stylus and Touch have same active area
* so compute physical size based on stylus
* data before its overwritten.
*/
features->x_phy =
(features->x_max * features->x_resolution) / 100;
features->y_phy =
(features->y_max * features->y_resolution) / 100;
features->x_max = features->y_max =
get_unaligned_le16(&report[10]);
length = 11;
}
return length;
}
/* /*
* Interface Descriptor of wacom devices can be incomplete and * Interface Descriptor of wacom devices can be incomplete and
* inconsistent so wacom_features table is used to store stylus * inconsistent so wacom_features table is used to store stylus
...@@ -193,6 +224,10 @@ static void wacom_close(struct input_dev *dev) ...@@ -193,6 +224,10 @@ static void wacom_close(struct input_dev *dev)
* X/Y maximum as well as the physical size of tablet. Since touch * X/Y maximum as well as the physical size of tablet. Since touch
* interfaces haven't supported pressure or distance, this is enough * interfaces haven't supported pressure or distance, this is enough
* information to override invalid values in the wacom_features table. * information to override invalid values in the wacom_features table.
*
* 3rd gen Bamboo Touch no longer define a Digitizer-Finger Pysical
* Collection. Instead they define a Logical Collection with a single
* Logical Maximum for both X and Y.
*/ */
static int wacom_parse_hid(struct usb_interface *intf, static int wacom_parse_hid(struct usb_interface *intf,
struct hid_descriptor *hid_desc, struct hid_descriptor *hid_desc,
...@@ -355,10 +390,20 @@ static int wacom_parse_hid(struct usb_interface *intf, ...@@ -355,10 +390,20 @@ static int wacom_parse_hid(struct usb_interface *intf,
} }
break; break;
case HID_COLLECTION: case HID_COLLECTION_END:
/* reset UsagePage and Finger */ /* reset UsagePage and Finger */
finger = usage = 0; finger = usage = 0;
break; break;
case HID_COLLECTION:
i++;
switch (report[i]) {
case HID_COLLECTION_LOGICAL:
i += wacom_parse_logical_collection(&report[i],
features);
break;
}
break;
} }
} }
......
...@@ -22,6 +22,7 @@ ...@@ -22,6 +22,7 @@
#define WACOM_PKGLEN_TPC1FG 5 #define WACOM_PKGLEN_TPC1FG 5
#define WACOM_PKGLEN_TPC2FG 14 #define WACOM_PKGLEN_TPC2FG 14
#define WACOM_PKGLEN_BBTOUCH 20 #define WACOM_PKGLEN_BBTOUCH 20
#define WACOM_PKGLEN_BBTOUCH3 64
/* device IDs */ /* device IDs */
#define STYLUS_DEVICE_ID 0x02 #define STYLUS_DEVICE_ID 0x02
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment