arm64: dts: imx8mp: change interrupt order per dt-binding

This patch changs interrupt order which found by dtbs_check.

$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
arch/arm64/boot/dts/freescale/imx8mp-evk.dt.yaml: ethernet@30bf0000: interrupt-names:0: 'macirq' was expected
arch/arm64/boot/dts/freescale/imx8mp-evk.dt.yaml: ethernet@30bf0000: interrupt-names:1: 'eth_wake_irq' was expected

According to Documentation/devicetree/bindings/net/snps,dwmac.yaml, we
should list interrupt in it's order.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

arch/arm64/boot/dts/freescale/imx8mp.dtsi

@@ -821,9 +821,9 @@ fec: ethernet@30be0000 {
 			eqos: ethernet@30bf0000 {
 				compatible = "nxp,imx8mp-dwmac-eqos", "snps,dwmac-5.10a";
 				reg = <0x30bf0000 0x10000>;
-				interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "eth_wake_irq", "macirq";
+				interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_wake_irq";
 				clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>,
 					 <&clk IMX8MP_CLK_QOS_ENET_ROOT>,
 					 <&clk IMX8MP_CLK_ENET_QOS_TIMER>,