Skip to content

L
linux
Commit 4191c340 authored by Lothar Waßmann's avatar Lothar Waßmann Committed by Shawn Guo
Browse files
Options

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines 

Convert mx23/mx28 dts files to use the padconfig defintions from
mxs-pinfunc.h.
Signed-off-by: default avatarLothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent bc3875f1
Show whitespace changes
Inline Side-by-side
Showing with 287 additions and 287 deletions
arch/arm/boot/dts/imx23-evk.dts
View file @ 4191c340
...@@ -50,9 +50,9 @@ MX23_PAD_PWM3__GPIO_1_29 ...@@ -50,9 +50,9 @@ MX23_PAD_PWM3__GPIO_1_29
MX23_PAD_PWM4__GPIO_1_30 MX23_PAD_PWM4__GPIO_1_30
MX23_PAD_SSP1_DETECT__SSP1_DETECT MX23_PAD_SSP1_DETECT__SSP1_DETECT
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
}; };
......
arch/arm/boot/dts/imx23-olinuxino.dts
View file @ 4191c340
...@@ -42,9 +42,9 @@ hog_pins_a: hog@0 { ...@@ -42,9 +42,9 @@ hog_pins_a: hog@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX23_PAD_GPMI_ALE__GPIO_0_17 MX23_PAD_GPMI_ALE__GPIO_0_17
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
led_pin_gpio2_1: led_gpio2_1@0 { led_pin_gpio2_1: led_gpio2_1@0 {
...@@ -52,9 +52,9 @@ led_pin_gpio2_1: led_gpio2_1@0 { ...@@ -52,9 +52,9 @@ led_pin_gpio2_1: led_gpio2_1@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX23_PAD_SSP1_DETECT__GPIO_2_1 MX23_PAD_SSP1_DETECT__GPIO_2_1
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
}; };
......
arch/arm/boot/dts/imx23-stmp378x_devb.dts
View file @ 4191c340
...@@ -42,9 +42,9 @@ hog_pins_a: hog@0 { ...@@ -42,9 +42,9 @@ hog_pins_a: hog@0 {
MX23_PAD_PWM3__GPIO_1_29 MX23_PAD_PWM3__GPIO_1_29
MX23_PAD_PWM4__GPIO_1_30 MX23_PAD_PWM4__GPIO_1_30
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
}; };
}; };
......
arch/arm/boot/dts/imx23.dtsi
View file @ 4191c340
...@@ -141,9 +141,9 @@ duart_pins_a: duart@0 { ...@@ -141,9 +141,9 @@ duart_pins_a: duart@0 {
MX23_PAD_PWM0__DUART_RX MX23_PAD_PWM0__DUART_RX
MX23_PAD_PWM1__DUART_TX MX23_PAD_PWM1__DUART_TX
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
auart0_pins_a: auart0@0 { auart0_pins_a: auart0@0 {
...@@ -154,9 +154,9 @@ MX23_PAD_AUART1_TX__AUART1_TX ...@@ -154,9 +154,9 @@ MX23_PAD_AUART1_TX__AUART1_TX
MX23_PAD_AUART1_CTS__AUART1_CTS MX23_PAD_AUART1_CTS__AUART1_CTS
MX23_PAD_AUART1_RTS__AUART1_RTS MX23_PAD_AUART1_RTS__AUART1_RTS
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
auart0_2pins_a: auart0-2pins@0 { auart0_2pins_a: auart0-2pins@0 {
...@@ -165,9 +165,9 @@ auart0_2pins_a: auart0-2pins@0 { ...@@ -165,9 +165,9 @@ auart0_2pins_a: auart0-2pins@0 {
MX23_PAD_I2C_SCL__AUART1_TX MX23_PAD_I2C_SCL__AUART1_TX
MX23_PAD_I2C_SDA__AUART1_RX MX23_PAD_I2C_SDA__AUART1_RX
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
gpmi_pins_a: gpmi-nand@0 { gpmi_pins_a: gpmi-nand@0 {
...@@ -191,9 +191,9 @@ MX23_PAD_GPMI_RDN__GPMI_RDN ...@@ -191,9 +191,9 @@ MX23_PAD_GPMI_RDN__GPMI_RDN
MX23_PAD_GPMI_CE1N__GPMI_CE1N MX23_PAD_GPMI_CE1N__GPMI_CE1N
MX23_PAD_GPMI_CE0N__GPMI_CE0N MX23_PAD_GPMI_CE0N__GPMI_CE0N
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
gpmi_pins_fixup: gpmi-pins-fixup { gpmi_pins_fixup: gpmi-pins-fixup {
...@@ -202,7 +202,7 @@ MX23_PAD_GPMI_WPN__GPMI_WPN ...@@ -202,7 +202,7 @@ MX23_PAD_GPMI_WPN__GPMI_WPN
MX23_PAD_GPMI_WRN__GPMI_WRN MX23_PAD_GPMI_WRN__GPMI_WRN
MX23_PAD_GPMI_RDN__GPMI_RDN MX23_PAD_GPMI_RDN__GPMI_RDN
>; >;
fsl,drive-strength = <2>; fsl,drive-strength = <MXS_DRIVE_12mA>;
}; };
mmc0_4bit_pins_a: mmc0-4bit@0 { mmc0_4bit_pins_a: mmc0-4bit@0 {
...@@ -215,9 +215,9 @@ MX23_PAD_SSP1_DATA3__SSP1_DATA3 ...@@ -215,9 +215,9 @@ MX23_PAD_SSP1_DATA3__SSP1_DATA3
MX23_PAD_SSP1_CMD__SSP1_CMD MX23_PAD_SSP1_CMD__SSP1_CMD
MX23_PAD_SSP1_SCK__SSP1_SCK MX23_PAD_SSP1_SCK__SSP1_SCK
>; >;
fsl,drive-strength = <1>; fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
mmc0_8bit_pins_a: mmc0-8bit@0 { mmc0_8bit_pins_a: mmc0-8bit@0 {
...@@ -235,9 +235,9 @@ MX23_PAD_SSP1_CMD__SSP1_CMD ...@@ -235,9 +235,9 @@ MX23_PAD_SSP1_CMD__SSP1_CMD
MX23_PAD_SSP1_DETECT__SSP1_DETECT MX23_PAD_SSP1_DETECT__SSP1_DETECT
MX23_PAD_SSP1_SCK__SSP1_SCK MX23_PAD_SSP1_SCK__SSP1_SCK
>; >;
fsl,drive-strength = <1>; fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
mmc0_pins_fixup: mmc0-pins-fixup { mmc0_pins_fixup: mmc0-pins-fixup {
...@@ -245,7 +245,7 @@ mmc0_pins_fixup: mmc0-pins-fixup { ...@@ -245,7 +245,7 @@ mmc0_pins_fixup: mmc0-pins-fixup {
MX23_PAD_SSP1_DETECT__SSP1_DETECT MX23_PAD_SSP1_DETECT__SSP1_DETECT
MX23_PAD_SSP1_SCK__SSP1_SCK MX23_PAD_SSP1_SCK__SSP1_SCK
>; >;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
pwm2_pins_a: pwm2@0 { pwm2_pins_a: pwm2@0 {
...@@ -253,9 +253,9 @@ pwm2_pins_a: pwm2@0 { ...@@ -253,9 +253,9 @@ pwm2_pins_a: pwm2@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX23_PAD_PWM2__PWM2 MX23_PAD_PWM2__PWM2
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_24bit_pins_a: lcdif-24bit@0 { lcdif_24bit_pins_a: lcdif-24bit@0 {
...@@ -290,9 +290,9 @@ MX23_PAD_LCD_ENABLE__LCD_ENABLE ...@@ -290,9 +290,9 @@ MX23_PAD_LCD_ENABLE__LCD_ENABLE
MX23_PAD_LCD_HSYNC__LCD_HSYNC MX23_PAD_LCD_HSYNC__LCD_HSYNC
MX23_PAD_LCD_VSYNC__LCD_VSYNC MX23_PAD_LCD_VSYNC__LCD_VSYNC
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
spi2_pins_a: spi2@0 { spi2_pins_a: spi2@0 {
...@@ -303,9 +303,9 @@ MX23_PAD_GPMI_RDY1__SSP2_CMD ...@@ -303,9 +303,9 @@ MX23_PAD_GPMI_RDY1__SSP2_CMD
MX23_PAD_GPMI_D00__SSP2_DATA0 MX23_PAD_GPMI_D00__SSP2_DATA0
MX23_PAD_GPMI_D03__SSP2_DATA3 MX23_PAD_GPMI_D03__SSP2_DATA3
>; >;
fsl,drive-strength = <1>; fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
}; };
......
arch/arm/boot/dts/imx28-apf28dev.dts
View file @ 4191c340
...@@ -49,9 +49,9 @@ MX28_PAD_LCD_D20__GPIO_1_20 ...@@ -49,9 +49,9 @@ MX28_PAD_LCD_D20__GPIO_1_20
MX28_PAD_LCD_D21__GPIO_1_21 MX28_PAD_LCD_D21__GPIO_1_21
MX28_PAD_LCD_D22__GPIO_1_22 MX28_PAD_LCD_D22__GPIO_1_22
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_pins_apf28dev: lcdif-apf28dev@0 { lcdif_pins_apf28dev: lcdif-apf28dev@0 {
...@@ -62,9 +62,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC ...@@ -62,9 +62,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC
MX28_PAD_LCD_RS__LCD_DOTCLK MX28_PAD_LCD_RS__LCD_DOTCLK
MX28_PAD_LCD_CS__LCD_ENABLE MX28_PAD_LCD_CS__LCD_ENABLE
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
}; };
......
arch/arm/boot/dts/imx28-apx4devkit.dts
View file @ 4191c340
...@@ -48,9 +48,9 @@ MX28_PAD_PWM3__GPIO_3_28 ...@@ -48,9 +48,9 @@ MX28_PAD_PWM3__GPIO_3_28
MX28_PAD_LCD_RESET__GPIO_3_30 MX28_PAD_LCD_RESET__GPIO_3_30
MX28_PAD_JTAG_RTCK__GPIO_4_20 MX28_PAD_JTAG_RTCK__GPIO_4_20
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_pins_apx4: lcdif-apx4@0 { lcdif_pins_apx4: lcdif-apx4@0 {
...@@ -61,9 +61,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC ...@@ -61,9 +61,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC
MX28_PAD_LCD_RS__LCD_DOTCLK MX28_PAD_LCD_RS__LCD_DOTCLK
MX28_PAD_LCD_CS__LCD_ENABLE MX28_PAD_LCD_CS__LCD_ENABLE
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 { mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
...@@ -76,17 +76,17 @@ MX28_PAD_SSP0_DATA7__SSP2_SCK ...@@ -76,17 +76,17 @@ MX28_PAD_SSP0_DATA7__SSP2_SCK
MX28_PAD_SSP2_SS1__SSP2_D1 MX28_PAD_SSP2_SS1__SSP2_D1
MX28_PAD_SSP2_SS2__SSP2_D2 MX28_PAD_SSP2_SS2__SSP2_D2
>; >;
fsl,drive-strength = <1>; fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 { mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_SSP0_DATA7__SSP2_SCK MX28_PAD_SSP0_DATA7__SSP2_SCK
>; >;
fsl,drive-strength = <2>; fsl,drive-strength = <MXS_DRIVE_12mA>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
}; };
......
arch/arm/boot/dts/imx28-cfa10036.dts
View file @ 4191c340
...@@ -28,9 +28,9 @@ ssd1306_cfa10036: ssd1306-10036@0 { ...@@ -28,9 +28,9 @@ ssd1306_cfa10036: ssd1306-10036@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_SSP0_DATA7__GPIO_2_7 MX28_PAD_SSP0_DATA7__GPIO_2_7
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
led_pins_cfa10036: leds-10036@0 { led_pins_cfa10036: leds-10036@0 {
...@@ -38,9 +38,9 @@ led_pins_cfa10036: leds-10036@0 { ...@@ -38,9 +38,9 @@ led_pins_cfa10036: leds-10036@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_AUART1_RX__GPIO_3_4 MX28_PAD_AUART1_RX__GPIO_3_4
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
usb0_otg_cfa10036: otg-10036@0 { usb0_otg_cfa10036: otg-10036@0 {
...@@ -48,9 +48,9 @@ usb0_otg_cfa10036: otg-10036@0 { ...@@ -48,9 +48,9 @@ usb0_otg_cfa10036: otg-10036@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_GPMI_RDY0__USB0_ID MX28_PAD_GPMI_RDY0__USB0_ID
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
}; };
......
arch/arm/boot/dts/imx28-cfa10037.dts
View file @ 4191c340
...@@ -27,9 +27,9 @@ usb_pins_cfa10037: usb-10037@0 { ...@@ -27,9 +27,9 @@ usb_pins_cfa10037: usb-10037@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_GPMI_D07__GPIO_0_7 MX28_PAD_GPMI_D07__GPIO_0_7
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
mac0_pins_cfa10037: mac0-10037@0 { mac0_pins_cfa10037: mac0-10037@0 {
...@@ -37,9 +37,9 @@ mac0_pins_cfa10037: mac0-10037@0 { ...@@ -37,9 +37,9 @@ mac0_pins_cfa10037: mac0-10037@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_SSP2_SS2__GPIO_2_21 MX28_PAD_SSP2_SS2__GPIO_2_21
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
}; };
}; };
......
arch/arm/boot/dts/imx28-cfa10049.dts
View file @ 4191c340
...@@ -27,9 +27,9 @@ usb_pins_cfa10049: usb-10049@0 { ...@@ -27,9 +27,9 @@ usb_pins_cfa10049: usb-10049@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_GPMI_D07__GPIO_0_7 MX28_PAD_GPMI_D07__GPIO_0_7
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
i2cmux_pins_cfa10049: i2cmux-10049@0 { i2cmux_pins_cfa10049: i2cmux-10049@0 {
...@@ -38,9 +38,9 @@ i2cmux_pins_cfa10049: i2cmux-10049@0 { ...@@ -38,9 +38,9 @@ i2cmux_pins_cfa10049: i2cmux-10049@0 {
MX28_PAD_LCD_D22__GPIO_1_22 MX28_PAD_LCD_D22__GPIO_1_22
MX28_PAD_LCD_D23__GPIO_1_23 MX28_PAD_LCD_D23__GPIO_1_23
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
mac0_pins_cfa10049: mac0-10049@0 { mac0_pins_cfa10049: mac0-10049@0 {
...@@ -48,9 +48,9 @@ mac0_pins_cfa10049: mac0-10049@0 { ...@@ -48,9 +48,9 @@ mac0_pins_cfa10049: mac0-10049@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_SSP2_SS2__GPIO_2_21 MX28_PAD_SSP2_SS2__GPIO_2_21
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
pca_pins_cfa10049: pca-10049@0 { pca_pins_cfa10049: pca-10049@0 {
...@@ -58,9 +58,9 @@ pca_pins_cfa10049: pca-10049@0 { ...@@ -58,9 +58,9 @@ pca_pins_cfa10049: pca-10049@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_SSP2_SS0__GPIO_2_19 MX28_PAD_SSP2_SS0__GPIO_2_19
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
rotary_pins_cfa10049: rotary-10049@0 { rotary_pins_cfa10049: rotary-10049@0 {
...@@ -69,9 +69,9 @@ rotary_pins_cfa10049: rotary-10049@0 { ...@@ -69,9 +69,9 @@ rotary_pins_cfa10049: rotary-10049@0 {
MX28_PAD_I2C0_SCL__GPIO_3_24 MX28_PAD_I2C0_SCL__GPIO_3_24
MX28_PAD_I2C0_SDA__GPIO_3_25 MX28_PAD_I2C0_SDA__GPIO_3_25
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
rotary_btn_pins_cfa10049: rotary-btn-10049@0 { rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
...@@ -79,9 +79,9 @@ rotary_btn_pins_cfa10049: rotary-btn-10049@0 { ...@@ -79,9 +79,9 @@ rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_SAIF1_SDATA0__GPIO_3_26 MX28_PAD_SAIF1_SDATA0__GPIO_3_26
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
spi2_pins_cfa10049: spi2-cfa10049@0 { spi2_pins_cfa10049: spi2-cfa10049@0 {
...@@ -92,9 +92,9 @@ MX28_PAD_SSP2_MOSI__GPIO_2_17 ...@@ -92,9 +92,9 @@ MX28_PAD_SSP2_MOSI__GPIO_2_17
MX28_PAD_SSP2_MISO__GPIO_2_18 MX28_PAD_SSP2_MISO__GPIO_2_18
MX28_PAD_AUART1_TX__GPIO_3_5 MX28_PAD_AUART1_TX__GPIO_3_5
>; >;
fsl,drive-strength = <1>; fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
spi3_pins_cfa10049: spi3-cfa10049@0 { spi3_pins_cfa10049: spi3-cfa10049@0 {
...@@ -106,9 +106,9 @@ MX28_PAD_GPMI_CE1N__GPIO_0_17 ...@@ -106,9 +106,9 @@ MX28_PAD_GPMI_CE1N__GPIO_0_17
MX28_PAD_GPMI_ALE__GPIO_0_26 MX28_PAD_GPMI_ALE__GPIO_0_26
MX28_PAD_GPMI_CLE__GPIO_0_27 MX28_PAD_GPMI_CLE__GPIO_0_27
>; >;
fsl,drive-strength = <1>; fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
lcdif_18bit_pins_cfa10049: lcdif-18bit@0 { lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
...@@ -133,9 +133,9 @@ MX28_PAD_LCD_D15__LCD_D15 ...@@ -133,9 +133,9 @@ MX28_PAD_LCD_D15__LCD_D15
MX28_PAD_LCD_D16__LCD_D16 MX28_PAD_LCD_D16__LCD_D16
MX28_PAD_LCD_D17__LCD_D17 MX28_PAD_LCD_D17__LCD_D17
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_pins_cfa10049: lcdif-evk@0 { lcdif_pins_cfa10049: lcdif-evk@0 {
...@@ -146,9 +146,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC ...@@ -146,9 +146,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC
MX28_PAD_LCD_RS__LCD_DOTCLK MX28_PAD_LCD_RS__LCD_DOTCLK
MX28_PAD_LCD_CS__LCD_ENABLE MX28_PAD_LCD_CS__LCD_ENABLE
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 { lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
...@@ -156,9 +156,9 @@ lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 { ...@@ -156,9 +156,9 @@ lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_LCD_RESET__GPIO_3_30 MX28_PAD_LCD_RESET__GPIO_3_30
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
w1_gpio_pins: w1-gpio@0 { w1_gpio_pins: w1-gpio@0 {
...@@ -166,9 +166,9 @@ w1_gpio_pins: w1-gpio@0 { ...@@ -166,9 +166,9 @@ w1_gpio_pins: w1-gpio@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_LCD_D21__GPIO_1_21 MX28_PAD_LCD_D21__GPIO_1_21
>; >;
fsl,drive-strength = <1>; fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; /* 0 will enable the keeper */ fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */
}; };
}; };
......
arch/arm/boot/dts/imx28-cfa10055.dts
View file @ 4191c340
...@@ -31,9 +31,9 @@ MX28_PAD_SSP2_MOSI__GPIO_2_17 ...@@ -31,9 +31,9 @@ MX28_PAD_SSP2_MOSI__GPIO_2_17
MX28_PAD_SSP2_MISO__GPIO_2_18 MX28_PAD_SSP2_MISO__GPIO_2_18
MX28_PAD_AUART1_TX__GPIO_3_5 MX28_PAD_AUART1_TX__GPIO_3_5
>; >;
fsl,drive-strength = <1>; fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
lcdif_18bit_pins_cfa10055: lcdif-18bit@0 { lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
...@@ -58,9 +58,9 @@ MX28_PAD_LCD_D15__LCD_D15 ...@@ -58,9 +58,9 @@ MX28_PAD_LCD_D15__LCD_D15
MX28_PAD_LCD_D16__LCD_D16 MX28_PAD_LCD_D16__LCD_D16
MX28_PAD_LCD_D17__LCD_D17 MX28_PAD_LCD_D17__LCD_D17
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_pins_cfa10055: lcdif-evk@0 { lcdif_pins_cfa10055: lcdif-evk@0 {
...@@ -71,9 +71,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC ...@@ -71,9 +71,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC
MX28_PAD_LCD_RS__LCD_DOTCLK MX28_PAD_LCD_RS__LCD_DOTCLK
MX28_PAD_LCD_CS__LCD_ENABLE MX28_PAD_LCD_CS__LCD_ENABLE
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 { lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
...@@ -81,9 +81,9 @@ lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 { ...@@ -81,9 +81,9 @@ lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_LCD_RESET__GPIO_3_30 MX28_PAD_LCD_RESET__GPIO_3_30
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
}; };
......
arch/arm/boot/dts/imx28-cfa10056.dts
View file @ 4191c340
...@@ -30,9 +30,9 @@ MX28_PAD_SSP2_MOSI__GPIO_2_17 ...@@ -30,9 +30,9 @@ MX28_PAD_SSP2_MOSI__GPIO_2_17
MX28_PAD_SSP2_MISO__GPIO_2_18 MX28_PAD_SSP2_MISO__GPIO_2_18
MX28_PAD_AUART1_TX__GPIO_3_5 MX28_PAD_AUART1_TX__GPIO_3_5
>; >;
fsl,drive-strength = <1>; fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
lcdif_pins_cfa10056: lcdif-10056@0 { lcdif_pins_cfa10056: lcdif-10056@0 {
...@@ -43,9 +43,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC ...@@ -43,9 +43,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC
MX28_PAD_LCD_RS__LCD_DOTCLK MX28_PAD_LCD_RS__LCD_DOTCLK
MX28_PAD_LCD_CS__LCD_ENABLE MX28_PAD_LCD_CS__LCD_ENABLE
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 { lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
...@@ -53,9 +53,9 @@ lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 { ...@@ -53,9 +53,9 @@ lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_LCD_RESET__GPIO_3_30 MX28_PAD_LCD_RESET__GPIO_3_30
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
}; };
......
arch/arm/boot/dts/imx28-cfa10057.dts
View file @ 4191c340
...@@ -28,9 +28,9 @@ usb_pins_cfa10057: usb-10057@0 { ...@@ -28,9 +28,9 @@ usb_pins_cfa10057: usb-10057@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_GPMI_D07__GPIO_0_7 MX28_PAD_GPMI_D07__GPIO_0_7
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_18bit_pins_cfa10057: lcdif-18bit@0 { lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
...@@ -55,9 +55,9 @@ MX28_PAD_LCD_D15__LCD_D15 ...@@ -55,9 +55,9 @@ MX28_PAD_LCD_D15__LCD_D15
MX28_PAD_LCD_D16__LCD_D16 MX28_PAD_LCD_D16__LCD_D16
MX28_PAD_LCD_D17__LCD_D17 MX28_PAD_LCD_D17__LCD_D17
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_pins_cfa10057: lcdif-evk@0 { lcdif_pins_cfa10057: lcdif-evk@0 {
...@@ -68,9 +68,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC ...@@ -68,9 +68,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC
MX28_PAD_LCD_RS__LCD_DOTCLK MX28_PAD_LCD_RS__LCD_DOTCLK
MX28_PAD_LCD_CS__LCD_ENABLE MX28_PAD_LCD_CS__LCD_ENABLE
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
}; };
......
arch/arm/boot/dts/imx28-cfa10058.dts
View file @ 4191c340
...@@ -28,9 +28,9 @@ usb_pins_cfa10058: usb-10058@0 { ...@@ -28,9 +28,9 @@ usb_pins_cfa10058: usb-10058@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_GPMI_D07__GPIO_0_7 MX28_PAD_GPMI_D07__GPIO_0_7
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_pins_cfa10058: lcdif-10058@0 { lcdif_pins_cfa10058: lcdif-10058@0 {
...@@ -41,9 +41,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC ...@@ -41,9 +41,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC
MX28_PAD_LCD_RS__LCD_DOTCLK MX28_PAD_LCD_RS__LCD_DOTCLK
MX28_PAD_LCD_CS__LCD_ENABLE MX28_PAD_LCD_CS__LCD_ENABLE
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
}; };
......
arch/arm/boot/dts/imx28-evk.dts
View file @ 4191c340
...@@ -79,9 +79,9 @@ MX28_PAD_LCD_RESET__GPIO_3_30 ...@@ -79,9 +79,9 @@ MX28_PAD_LCD_RESET__GPIO_3_30
MX28_PAD_AUART2_RX__GPIO_3_8 MX28_PAD_AUART2_RX__GPIO_3_8
MX28_PAD_AUART2_TX__GPIO_3_9 MX28_PAD_AUART2_TX__GPIO_3_9
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
led_pin_gpio3_5: led_gpio3_5@0 { led_pin_gpio3_5: led_gpio3_5@0 {
...@@ -89,9 +89,9 @@ led_pin_gpio3_5: led_gpio3_5@0 { ...@@ -89,9 +89,9 @@ led_pin_gpio3_5: led_gpio3_5@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_AUART1_TX__GPIO_3_5 MX28_PAD_AUART1_TX__GPIO_3_5
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
gpmi_pins_evk: gpmi-nand-evk@0 { gpmi_pins_evk: gpmi-nand-evk@0 {
...@@ -100,9 +100,9 @@ gpmi_pins_evk: gpmi-nand-evk@0 { ...@@ -100,9 +100,9 @@ gpmi_pins_evk: gpmi-nand-evk@0 {
MX28_PAD_GPMI_CE1N__GPMI_CE1N MX28_PAD_GPMI_CE1N__GPMI_CE1N
MX28_PAD_GPMI_RDY1__GPMI_READY1 MX28_PAD_GPMI_RDY1__GPMI_READY1
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_pins_evk: lcdif-evk@0 { lcdif_pins_evk: lcdif-evk@0 {
...@@ -113,9 +113,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC ...@@ -113,9 +113,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC
MX28_PAD_LCD_RS__LCD_DOTCLK MX28_PAD_LCD_RS__LCD_DOTCLK
MX28_PAD_LCD_CS__LCD_ENABLE MX28_PAD_LCD_CS__LCD_ENABLE
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
}; };
......
arch/arm/boot/dts/imx28-m28evk.dts
View file @ 4191c340
...@@ -98,9 +98,9 @@ MX28_PAD_AUART2_RTS__GPIO_3_11 ...@@ -98,9 +98,9 @@ MX28_PAD_AUART2_RTS__GPIO_3_11
MX28_PAD_AUART3_RX__GPIO_3_12 MX28_PAD_AUART3_RX__GPIO_3_12
MX28_PAD_AUART3_TX__GPIO_3_13 MX28_PAD_AUART3_TX__GPIO_3_13
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_pins_m28: lcdif-m28@0 { lcdif_pins_m28: lcdif-m28@0 {
...@@ -109,9 +109,9 @@ lcdif_pins_m28: lcdif-m28@0 { ...@@ -109,9 +109,9 @@ lcdif_pins_m28: lcdif-m28@0 {
MX28_PAD_LCD_DOTCLK__LCD_DOTCLK MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
MX28_PAD_LCD_ENABLE__LCD_ENABLE MX28_PAD_LCD_ENABLE__LCD_ENABLE
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
}; };
......
arch/arm/boot/dts/imx28-sps1.dts
View file @ 4191c340
...@@ -33,9 +33,9 @@ MX28_PAD_GPMI_D00__GPIO_0_0 ...@@ -33,9 +33,9 @@ MX28_PAD_GPMI_D00__GPIO_0_0
MX28_PAD_GPMI_D03__GPIO_0_3 MX28_PAD_GPMI_D03__GPIO_0_3
MX28_PAD_GPMI_D06__GPIO_0_6 MX28_PAD_GPMI_D06__GPIO_0_6
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
}; };
......
arch/arm/boot/dts/imx28.dtsi
View file @ 4191c340
...@@ -211,9 +211,9 @@ duart_pins_a: duart@0 { ...@@ -211,9 +211,9 @@ duart_pins_a: duart@0 {
MX28_PAD_PWM0__DUART_RX MX28_PAD_PWM0__DUART_RX
MX28_PAD_PWM1__DUART_TX MX28_PAD_PWM1__DUART_TX
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
duart_pins_b: duart@1 { duart_pins_b: duart@1 {
...@@ -222,9 +222,9 @@ duart_pins_b: duart@1 { ...@@ -222,9 +222,9 @@ duart_pins_b: duart@1 {
MX28_PAD_AUART0_CTS__DUART_RX MX28_PAD_AUART0_CTS__DUART_RX
MX28_PAD_AUART0_RTS__DUART_TX MX28_PAD_AUART0_RTS__DUART_TX
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
duart_4pins_a: duart-4pins@0 { duart_4pins_a: duart-4pins@0 {
...@@ -235,9 +235,9 @@ MX28_PAD_AUART0_RTS__DUART_TX ...@@ -235,9 +235,9 @@ MX28_PAD_AUART0_RTS__DUART_TX
MX28_PAD_AUART0_RX__DUART_CTS MX28_PAD_AUART0_RX__DUART_CTS
MX28_PAD_AUART0_TX__DUART_RTS MX28_PAD_AUART0_TX__DUART_RTS
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
gpmi_pins_a: gpmi-nand@0 { gpmi_pins_a: gpmi-nand@0 {
...@@ -259,9 +259,9 @@ MX28_PAD_GPMI_ALE__GPMI_ALE ...@@ -259,9 +259,9 @@ MX28_PAD_GPMI_ALE__GPMI_ALE
MX28_PAD_GPMI_CLE__GPMI_CLE MX28_PAD_GPMI_CLE__GPMI_CLE
MX28_PAD_GPMI_RESETN__GPMI_RESETN MX28_PAD_GPMI_RESETN__GPMI_RESETN
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
gpmi_status_cfg: gpmi-status-cfg { gpmi_status_cfg: gpmi-status-cfg {
...@@ -270,7 +270,7 @@ MX28_PAD_GPMI_RDN__GPMI_RDN ...@@ -270,7 +270,7 @@ MX28_PAD_GPMI_RDN__GPMI_RDN
MX28_PAD_GPMI_WRN__GPMI_WRN MX28_PAD_GPMI_WRN__GPMI_WRN
MX28_PAD_GPMI_RESETN__GPMI_RESETN MX28_PAD_GPMI_RESETN__GPMI_RESETN
>; >;
fsl,drive-strength = <2>; fsl,drive-strength = <MXS_DRIVE_12mA>;
}; };
auart0_pins_a: auart0@0 { auart0_pins_a: auart0@0 {
...@@ -281,9 +281,9 @@ MX28_PAD_AUART0_TX__AUART0_TX ...@@ -281,9 +281,9 @@ MX28_PAD_AUART0_TX__AUART0_TX
MX28_PAD_AUART0_CTS__AUART0_CTS MX28_PAD_AUART0_CTS__AUART0_CTS
MX28_PAD_AUART0_RTS__AUART0_RTS MX28_PAD_AUART0_RTS__AUART0_RTS
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
auart0_2pins_a: auart0-2pins@0 { auart0_2pins_a: auart0-2pins@0 {
...@@ -292,9 +292,9 @@ auart0_2pins_a: auart0-2pins@0 { ...@@ -292,9 +292,9 @@ auart0_2pins_a: auart0-2pins@0 {
MX28_PAD_AUART0_RX__AUART0_RX MX28_PAD_AUART0_RX__AUART0_RX
MX28_PAD_AUART0_TX__AUART0_TX MX28_PAD_AUART0_TX__AUART0_TX
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
auart1_pins_a: auart1@0 { auart1_pins_a: auart1@0 {
...@@ -305,9 +305,9 @@ MX28_PAD_AUART1_TX__AUART1_TX ...@@ -305,9 +305,9 @@ MX28_PAD_AUART1_TX__AUART1_TX
MX28_PAD_AUART1_CTS__AUART1_CTS MX28_PAD_AUART1_CTS__AUART1_CTS
MX28_PAD_AUART1_RTS__AUART1_RTS MX28_PAD_AUART1_RTS__AUART1_RTS
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
auart1_2pins_a: auart1-2pins@0 { auart1_2pins_a: auart1-2pins@0 {
...@@ -316,9 +316,9 @@ auart1_2pins_a: auart1-2pins@0 { ...@@ -316,9 +316,9 @@ auart1_2pins_a: auart1-2pins@0 {
MX28_PAD_AUART1_RX__AUART1_RX MX28_PAD_AUART1_RX__AUART1_RX
MX28_PAD_AUART1_TX__AUART1_TX MX28_PAD_AUART1_TX__AUART1_TX
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
auart2_2pins_a: auart2-2pins@0 { auart2_2pins_a: auart2-2pins@0 {
...@@ -327,9 +327,9 @@ auart2_2pins_a: auart2-2pins@0 { ...@@ -327,9 +327,9 @@ auart2_2pins_a: auart2-2pins@0 {
MX28_PAD_SSP2_SCK__AUART2_RX MX28_PAD_SSP2_SCK__AUART2_RX
MX28_PAD_SSP2_MOSI__AUART2_TX MX28_PAD_SSP2_MOSI__AUART2_TX
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
auart2_2pins_b: auart2-2pins@1 { auart2_2pins_b: auart2-2pins@1 {
...@@ -338,9 +338,9 @@ auart2_2pins_b: auart2-2pins@1 { ...@@ -338,9 +338,9 @@ auart2_2pins_b: auart2-2pins@1 {
MX28_PAD_AUART2_RX__AUART2_RX MX28_PAD_AUART2_RX__AUART2_RX
MX28_PAD_AUART2_TX__AUART2_TX MX28_PAD_AUART2_TX__AUART2_TX
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
auart3_pins_a: auart3@0 { auart3_pins_a: auart3@0 {
...@@ -351,9 +351,9 @@ MX28_PAD_AUART3_TX__AUART3_TX ...@@ -351,9 +351,9 @@ MX28_PAD_AUART3_TX__AUART3_TX
MX28_PAD_AUART3_CTS__AUART3_CTS MX28_PAD_AUART3_CTS__AUART3_CTS
MX28_PAD_AUART3_RTS__AUART3_RTS MX28_PAD_AUART3_RTS__AUART3_RTS
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
auart3_2pins_a: auart3-2pins@0 { auart3_2pins_a: auart3-2pins@0 {
...@@ -362,9 +362,9 @@ auart3_2pins_a: auart3-2pins@0 { ...@@ -362,9 +362,9 @@ auart3_2pins_a: auart3-2pins@0 {
MX28_PAD_SSP2_MISO__AUART3_RX MX28_PAD_SSP2_MISO__AUART3_RX
MX28_PAD_SSP2_SS0__AUART3_TX MX28_PAD_SSP2_SS0__AUART3_TX
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
auart3_2pins_b: auart3-2pins@1 { auart3_2pins_b: auart3-2pins@1 {
...@@ -373,9 +373,9 @@ auart3_2pins_b: auart3-2pins@1 { ...@@ -373,9 +373,9 @@ auart3_2pins_b: auart3-2pins@1 {
MX28_PAD_AUART3_RX__AUART3_RX MX28_PAD_AUART3_RX__AUART3_RX
MX28_PAD_AUART3_TX__AUART3_TX MX28_PAD_AUART3_TX__AUART3_TX
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
auart4_2pins_a: auart4@0 { auart4_2pins_a: auart4@0 {
...@@ -384,9 +384,9 @@ auart4_2pins_a: auart4@0 { ...@@ -384,9 +384,9 @@ auart4_2pins_a: auart4@0 {
MX28_PAD_SSP3_SCK__AUART4_TX MX28_PAD_SSP3_SCK__AUART4_TX
MX28_PAD_SSP3_MOSI__AUART4_RX MX28_PAD_SSP3_MOSI__AUART4_RX
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
mac0_pins_a: mac0@0 { mac0_pins_a: mac0@0 {
...@@ -402,9 +402,9 @@ MX28_PAD_ENET0_TXD0__ENET0_TXD0 ...@@ -402,9 +402,9 @@ MX28_PAD_ENET0_TXD0__ENET0_TXD0
MX28_PAD_ENET0_TXD1__ENET0_TXD1 MX28_PAD_ENET0_TXD1__ENET0_TXD1
MX28_PAD_ENET_CLK__CLKCTRL_ENET MX28_PAD_ENET_CLK__CLKCTRL_ENET
>; >;
fsl,drive-strength = <1>; fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
mac1_pins_a: mac1@0 { mac1_pins_a: mac1@0 {
...@@ -417,9 +417,9 @@ MX28_PAD_ENET0_COL__ENET1_TX_EN ...@@ -417,9 +417,9 @@ MX28_PAD_ENET0_COL__ENET1_TX_EN
MX28_PAD_ENET0_TXD2__ENET1_TXD0 MX28_PAD_ENET0_TXD2__ENET1_TXD0
MX28_PAD_ENET0_TXD3__ENET1_TXD1 MX28_PAD_ENET0_TXD3__ENET1_TXD1
>; >;
fsl,drive-strength = <1>; fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
mmc0_8bit_pins_a: mmc0-8bit@0 { mmc0_8bit_pins_a: mmc0-8bit@0 {
...@@ -437,9 +437,9 @@ MX28_PAD_SSP0_CMD__SSP0_CMD ...@@ -437,9 +437,9 @@ MX28_PAD_SSP0_CMD__SSP0_CMD
MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
MX28_PAD_SSP0_SCK__SSP0_SCK MX28_PAD_SSP0_SCK__SSP0_SCK
>; >;
fsl,drive-strength = <1>; fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
mmc0_4bit_pins_a: mmc0-4bit@0 { mmc0_4bit_pins_a: mmc0-4bit@0 {
...@@ -453,24 +453,24 @@ MX28_PAD_SSP0_CMD__SSP0_CMD ...@@ -453,24 +453,24 @@ MX28_PAD_SSP0_CMD__SSP0_CMD
MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
MX28_PAD_SSP0_SCK__SSP0_SCK MX28_PAD_SSP0_SCK__SSP0_SCK
>; >;
fsl,drive-strength = <1>; fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
mmc0_cd_cfg: mmc0-cd-cfg { mmc0_cd_cfg: mmc0-cd-cfg {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
>; >;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
mmc0_sck_cfg: mmc0-sck-cfg { mmc0_sck_cfg: mmc0-sck-cfg {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_SSP0_SCK__SSP0_SCK MX28_PAD_SSP0_SCK__SSP0_SCK
>; >;
fsl,drive-strength = <2>; fsl,drive-strength = <MXS_DRIVE_12mA>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
i2c0_pins_a: i2c0@0 { i2c0_pins_a: i2c0@0 {
...@@ -479,9 +479,9 @@ i2c0_pins_a: i2c0@0 { ...@@ -479,9 +479,9 @@ i2c0_pins_a: i2c0@0 {
MX28_PAD_I2C0_SCL__I2C0_SCL MX28_PAD_I2C0_SCL__I2C0_SCL
MX28_PAD_I2C0_SDA__I2C0_SDA MX28_PAD_I2C0_SDA__I2C0_SDA
>; >;
fsl,drive-strength = <1>; fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
i2c0_pins_b: i2c0@1 { i2c0_pins_b: i2c0@1 {
...@@ -490,9 +490,9 @@ i2c0_pins_b: i2c0@1 { ...@@ -490,9 +490,9 @@ i2c0_pins_b: i2c0@1 {
MX28_PAD_AUART0_RX__I2C0_SCL MX28_PAD_AUART0_RX__I2C0_SCL
MX28_PAD_AUART0_TX__I2C0_SDA MX28_PAD_AUART0_TX__I2C0_SDA
>; >;
fsl,drive-strength = <1>; fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
i2c1_pins_a: i2c1@0 { i2c1_pins_a: i2c1@0 {
...@@ -501,9 +501,9 @@ i2c1_pins_a: i2c1@0 { ...@@ -501,9 +501,9 @@ i2c1_pins_a: i2c1@0 {
MX28_PAD_PWM0__I2C1_SCL MX28_PAD_PWM0__I2C1_SCL
MX28_PAD_PWM1__I2C1_SDA MX28_PAD_PWM1__I2C1_SDA
>; >;
fsl,drive-strength = <1>; fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
saif0_pins_a: saif0@0 { saif0_pins_a: saif0@0 {
...@@ -514,9 +514,9 @@ MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK ...@@ -514,9 +514,9 @@ MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
>; >;
fsl,drive-strength = <2>; fsl,drive-strength = <MXS_DRIVE_12mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
saif0_pins_b: saif0@1 { saif0_pins_b: saif0@1 {
...@@ -526,9 +526,9 @@ MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK ...@@ -526,9 +526,9 @@ MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
>; >;
fsl,drive-strength = <2>; fsl,drive-strength = <MXS_DRIVE_12mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
saif1_pins_a: saif1@0 { saif1_pins_a: saif1@0 {
...@@ -536,9 +536,9 @@ saif1_pins_a: saif1@0 { ...@@ -536,9 +536,9 @@ saif1_pins_a: saif1@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
>; >;
fsl,drive-strength = <2>; fsl,drive-strength = <MXS_DRIVE_12mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
pwm0_pins_a: pwm0@0 { pwm0_pins_a: pwm0@0 {
...@@ -546,9 +546,9 @@ pwm0_pins_a: pwm0@0 { ...@@ -546,9 +546,9 @@ pwm0_pins_a: pwm0@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_PWM0__PWM_0 MX28_PAD_PWM0__PWM_0
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
pwm2_pins_a: pwm2@0 { pwm2_pins_a: pwm2@0 {
...@@ -556,9 +556,9 @@ pwm2_pins_a: pwm2@0 { ...@@ -556,9 +556,9 @@ pwm2_pins_a: pwm2@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_PWM2__PWM_2 MX28_PAD_PWM2__PWM_2
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
pwm3_pins_a: pwm3@0 { pwm3_pins_a: pwm3@0 {
...@@ -566,9 +566,9 @@ pwm3_pins_a: pwm3@0 { ...@@ -566,9 +566,9 @@ pwm3_pins_a: pwm3@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_PWM3__PWM_3 MX28_PAD_PWM3__PWM_3
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
pwm3_pins_b: pwm3@1 { pwm3_pins_b: pwm3@1 {
...@@ -576,9 +576,9 @@ pwm3_pins_b: pwm3@1 { ...@@ -576,9 +576,9 @@ pwm3_pins_b: pwm3@1 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_SAIF0_MCLK__PWM_3 MX28_PAD_SAIF0_MCLK__PWM_3
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
pwm4_pins_a: pwm4@0 { pwm4_pins_a: pwm4@0 {
...@@ -586,9 +586,9 @@ pwm4_pins_a: pwm4@0 { ...@@ -586,9 +586,9 @@ pwm4_pins_a: pwm4@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_PWM4__PWM_4 MX28_PAD_PWM4__PWM_4
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_24bit_pins_a: lcdif-24bit@0 { lcdif_24bit_pins_a: lcdif-24bit@0 {
...@@ -619,9 +619,9 @@ MX28_PAD_LCD_D21__LCD_D21 ...@@ -619,9 +619,9 @@ MX28_PAD_LCD_D21__LCD_D21
MX28_PAD_LCD_D22__LCD_D22 MX28_PAD_LCD_D22__LCD_D22
MX28_PAD_LCD_D23__LCD_D23 MX28_PAD_LCD_D23__LCD_D23
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_16bit_pins_a: lcdif-16bit@0 { lcdif_16bit_pins_a: lcdif-16bit@0 {
...@@ -644,9 +644,9 @@ MX28_PAD_LCD_D13__LCD_D13 ...@@ -644,9 +644,9 @@ MX28_PAD_LCD_D13__LCD_D13
MX28_PAD_LCD_D14__LCD_D14 MX28_PAD_LCD_D14__LCD_D14
MX28_PAD_LCD_D15__LCD_D15 MX28_PAD_LCD_D15__LCD_D15
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_sync_pins_a: lcdif-sync@0 { lcdif_sync_pins_a: lcdif-sync@0 {
...@@ -657,9 +657,9 @@ MX28_PAD_LCD_CS__LCD_ENABLE ...@@ -657,9 +657,9 @@ MX28_PAD_LCD_CS__LCD_ENABLE
MX28_PAD_LCD_RD_E__LCD_VSYNC MX28_PAD_LCD_RD_E__LCD_VSYNC
MX28_PAD_LCD_WR_RWN__LCD_HSYNC MX28_PAD_LCD_WR_RWN__LCD_HSYNC
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
can0_pins_a: can0@0 { can0_pins_a: can0@0 {
...@@ -668,9 +668,9 @@ can0_pins_a: can0@0 { ...@@ -668,9 +668,9 @@ can0_pins_a: can0@0 {
MX28_PAD_GPMI_RDY2__CAN0_TX MX28_PAD_GPMI_RDY2__CAN0_TX
MX28_PAD_GPMI_RDY3__CAN0_RX MX28_PAD_GPMI_RDY3__CAN0_RX
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
can1_pins_a: can1@0 { can1_pins_a: can1@0 {
...@@ -679,9 +679,9 @@ can1_pins_a: can1@0 { ...@@ -679,9 +679,9 @@ can1_pins_a: can1@0 {
MX28_PAD_GPMI_CE2N__CAN1_TX MX28_PAD_GPMI_CE2N__CAN1_TX
MX28_PAD_GPMI_CE3N__CAN1_RX MX28_PAD_GPMI_CE3N__CAN1_RX
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
spi2_pins_a: spi2@0 { spi2_pins_a: spi2@0 {
...@@ -692,9 +692,9 @@ MX28_PAD_SSP2_MOSI__SSP2_CMD ...@@ -692,9 +692,9 @@ MX28_PAD_SSP2_MOSI__SSP2_CMD
MX28_PAD_SSP2_MISO__SSP2_D0 MX28_PAD_SSP2_MISO__SSP2_D0
MX28_PAD_SSP2_SS0__SSP2_D3 MX28_PAD_SSP2_SS0__SSP2_D3
>; >;
fsl,drive-strength = <1>; fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
spi3_pins_a: spi3@0 { spi3_pins_a: spi3@0 {
...@@ -707,9 +707,9 @@ MX28_PAD_SSP3_MOSI__SSP3_CMD ...@@ -707,9 +707,9 @@ MX28_PAD_SSP3_MOSI__SSP3_CMD
MX28_PAD_SSP3_MISO__SSP3_D0 MX28_PAD_SSP3_MISO__SSP3_D0
MX28_PAD_SSP3_SS0__SSP3_D3 MX28_PAD_SSP3_SS0__SSP3_D3
>; >;
fsl,drive-strength = <1>; fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
usbphy0_pins_a: usbphy0@0 { usbphy0_pins_a: usbphy0@0 {
...@@ -717,9 +717,9 @@ usbphy0_pins_a: usbphy0@0 { ...@@ -717,9 +717,9 @@ usbphy0_pins_a: usbphy0@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_SSP2_SS2__USB0_OVERCURRENT MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
>; >;
fsl,drive-strength = <2>; fsl,drive-strength = <MXS_DRIVE_12mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
usbphy0_pins_b: usbphy0@1 { usbphy0_pins_b: usbphy0@1 {
...@@ -727,9 +727,9 @@ usbphy0_pins_b: usbphy0@1 { ...@@ -727,9 +727,9 @@ usbphy0_pins_b: usbphy0@1 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_AUART1_CTS__USB0_OVERCURRENT MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
>; >;
fsl,drive-strength = <2>; fsl,drive-strength = <MXS_DRIVE_12mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
usbphy1_pins_a: usbphy1@0 { usbphy1_pins_a: usbphy1@0 {
...@@ -737,9 +737,9 @@ usbphy1_pins_a: usbphy1@0 { ...@@ -737,9 +737,9 @@ usbphy1_pins_a: usbphy1@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_SSP2_SS1__USB1_OVERCURRENT MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
>; >;
fsl,drive-strength = <2>; fsl,drive-strength = <MXS_DRIVE_12mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
usb0_id_pins_a: usb0id@0 { usb0_id_pins_a: usb0id@0 {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7