Skip to content

L
linux
Commit 42537673 authored by Mark A. Greer's avatar Mark A. Greer Committed by Linus Torvalds
Browse files
Options

[PATCH] ppc32: katana update 

This patch updates support for the katana 750i, 752i, and 3750.

It:
- supports more bus frequencies
- uses platform_notify hook to update platform_data entries
- does some misc cleanup
Signed-off-by: default avatarMark A. Greer <mgreer@mvista.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 6cd1b450
Show whitespace changes
Inline Side-by-side
Showing with 135 additions and 69 deletions
arch/ppc/configs/katana_defconfig
View file @ 42537673
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-rc2
# Fri Nov 19 15:17:10 2004
# Linux kernel version: 2.6.11-rc2
# Tue Jan 25 16:31:13 2005
#
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_PPC=y
CONFIG_PPC32=y
......@@ -79,8 +80,10 @@ CONFIG_NOT_COHERENT_CACHE=y
# CONFIG_APUS is not set
CONFIG_KATANA=y
# CONFIG_WILLOW is not set
# CONFIG_CPCI690 is not set
# CONFIG_PCORE is not set
# CONFIG_POWERPMC250 is not set
# CONFIG_CHESTNUT is not set
# CONFIG_SPRUCE is not set
# CONFIG_EV64260 is not set
# CONFIG_LOPEC is not set
......@@ -100,6 +103,7 @@ CONFIG_KATANA=y
# CONFIG_RPX8260 is not set
# CONFIG_TQM8260 is not set
# CONFIG_ADS8272 is not set
# CONFIG_PQ2FADS is not set
# CONFIG_LITE5200 is not set
CONFIG_MV64360=y
CONFIG_MV64X60=y
......@@ -126,6 +130,15 @@ CONFIG_PCI_DOMAINS=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PC-card bridges
#
#
# Advanced setup
#
......@@ -153,6 +166,7 @@ CONFIG_BOOT_LOAD=0x00800000
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
......@@ -176,11 +190,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
......@@ -194,6 +210,7 @@ CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
......@@ -449,6 +466,10 @@ CONFIG_HW_CONSOLE=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_MPSC=y
CONFIG_SERIAL_MPSC_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
......@@ -510,6 +531,7 @@ CONFIG_GEN_RTC=y
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
......@@ -523,11 +545,25 @@ CONFIG_DUMMY_CONSOLE=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
......@@ -649,3 +685,7 @@ CONFIG_CRC32=y
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
arch/ppc/platforms/katana.c
View file @ 42537673
......@@ -194,6 +194,14 @@ katana_bus_freq(void)
bd_cfg_0 = in_8((volatile char *)(cpld_base + KATANA_CPLD_BD_CFG_0));
switch (bd_cfg_0 & KATANA_CPLD_BD_CFG_0_SYSCLK_MASK) {
case KATANA_CPLD_BD_CFG_0_SYSCLK_200:
return 200000000;
break;
case KATANA_CPLD_BD_CFG_0_SYSCLK_166:
return 166666666;
break;
case KATANA_CPLD_BD_CFG_0_SYSCLK_133:
return 133333333;
break;
......@@ -234,7 +242,7 @@ katana_intr_setup(void)
/* Config GPP intr ctlr to respond to level trigger */
mv64x60_set_bits(&bh, MV64x60_COMM_ARBITER_CNTL, (1<<10));
/* XXXX Erranum FEr PCI-#8 */
/* Erranum FEr PCI-#8 */
mv64x60_clr_bits(&bh, MV64x60_PCI0_CMD, (1<<5) | (1<<9));
mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD, (1<<5) | (1<<9));
......@@ -392,7 +400,7 @@ katana_setup_bridge(void)
/* Lookup PCI host bridges */
if (mv64x60_init(&bh, &si))
printk("Bridge initialization failed.\n");
printk(KERN_WARNING "Bridge initialization failed.\n");
pci_dram_offset = 0; /* sys mem at same addr on PCI & cpu bus */
ppc_md.pci_swizzle = common_swizzle;
......@@ -433,7 +441,7 @@ katana_setup_arch(void)
* avoid dirty data in cache
*/
if (PVR_REV(mfspr(PVR)) == 0x0200) {
printk("DD2.0 detected. Setting L2 cache"
printk(KERN_INFO "DD2.0 detected. Setting L2 cache"
"to Writethrough mode\n");
_set_L2CR(L2CR_L2E | L2CR_L2PE | L2CR_L2WT);
}
......@@ -447,83 +455,96 @@ katana_setup_arch(void)
katana_setup_peripherals();
katana_enable_ipmi();
printk("Artesyn Communication Products, LLC - Katana(TM)\n");
printk(KERN_INFO "Artesyn Communication Products, LLC - Katana(TM)\n");
if (ppc_md.progress)
ppc_md.progress("katana_setup_arch: exit", 0);
return;
}
/* Platform device data fixup routine. */
static int __init
katana_fixup_pd(void)
{
struct list_head *entry;
struct platform_device *pd;
struct device *dev;
/* Platform device data fixup routines. */
#if defined(CONFIG_SERIAL_MPSC)
struct mpsc_pd_dd *dd;
static void __init
katana_fixup_mpsc_pdata(struct platform_device *pdev)
{
struct mpsc_pdata *pdata;
pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
pdata->max_idle = 40;
pdata->default_baud = KATANA_DEFAULT_BAUD;
pdata->brg_clk_src = KATANA_MPSC_CLK_SRC;
pdata->brg_clk_freq = KATANA_MPSC_CLK_FREQ;
return;
}
#endif
#if defined(CONFIG_MV643XX_ETH)
struct mv64xxx_eth_pd_dd *eth_dd;
static void __init
katana_fixup_eth_pdata(struct platform_device *pdev)
{
struct mv64xxx_eth_platform_data *eth_pd;
static u16 phy_addr[] = {
KATANA_ETH0_PHY_ADDR,
KATANA_ETH1_PHY_ADDR,
KATANA_ETH2_PHY_ADDR,
};
struct resource *rx_r;
struct resource *tx_r;
int rx_size = KATANA_ETH_RX_QUEUE_SIZE * ETH_DESC_SIZE;
int tx_size = KATANA_ETH_TX_QUEUE_SIZE * ETH_DESC_SIZE;
#endif
int rx_size = KATANA_ETH_RX_QUEUE_SIZE * MV64340_ETH_DESC_SIZE;
int tx_size = KATANA_ETH_TX_QUEUE_SIZE * MV64340_ETH_DESC_SIZE;
eth_pd = pdev->dev.platform_data;
eth_pd->force_phy_addr = 1;
eth_pd->phy_addr = phy_addr[pdev->id];
eth_pd->tx_queue_size = KATANA_ETH_TX_QUEUE_SIZE;
eth_pd->rx_queue_size = KATANA_ETH_RX_QUEUE_SIZE;
eth_pd->tx_sram_addr = mv643xx_sram_alloc(tx_size);
if (eth_pd->tx_sram_addr)
eth_pd->tx_sram_size = tx_size;
else
printk(KERN_ERR "mv643xx_sram_alloc failed\n");
list_for_each(entry, &platform_bus_type.devices.list) {
dev = container_of(entry, struct device, bus_list);
pd = container_of(dev, struct platform_device, dev);
eth_pd->rx_sram_addr = mv643xx_sram_alloc(rx_size);
if (eth_pd->rx_sram_addr)
eth_pd->rx_sram_size = rx_size;
else
printk(KERN_ERR "mv643xx_sram_alloc failed\n");
}
#endif
static int __init
katana_platform_notify(struct device *dev)
{
static struct {
char *bus_id;
void ((*rtn)(struct platform_device *pdev));
} dev_map[] = {
#if defined(CONFIG_SERIAL_MPSC)
if (!strncmp(pd->name, MPSC_CTLR_NAME, BUS_ID_SIZE)) {
dd = (struct mpsc_pd_dd *)dev_get_drvdata(&pd->dev);
dd->max_idle = 40; /* XXXX what should be? */
dd->default_baud = KATANA_DEFAULT_BAUD;
dd->brg_clk_src = KATANA_MPSC_CLK_SRC;
dd->brg_clk_freq = KATANA_MPSC_CLK_FREQ;
}
{ MPSC_CTLR_NAME "0", katana_fixup_mpsc_pdata },
{ MPSC_CTLR_NAME "1", katana_fixup_mpsc_pdata },
#endif
#if defined(CONFIG_MV643XX_ETH)
if (!strncmp(pd->name, MV64XXX_ETH_NAME, BUS_ID_SIZE)) {
eth_dd = (struct mv64xxx_eth_pd_dd *)
dev_get_drvdata(&pd->dev);
eth_dd->phy_addr = phy_addr[pd->id];
eth_dd->port_config = KATANA_ETH_PORT_CONFIG_VALUE;
eth_dd->port_config_extend =
KATANA_ETH_PORT_CONFIG_EXTEND_VALUE;
eth_dd->port_sdma_config =
KATANA_ETH_PORT_SDMA_CONFIG_VALUE;
eth_dd->port_serial_control =
KATANA_ETH_PORT_SERIAL_CONTROL_VALUE;
eth_dd->tx_queue_size = KATANA_ETH_TX_QUEUE_SIZE;
eth_dd->rx_queue_size = KATANA_ETH_RX_QUEUE_SIZE;
rx_r = &pd->resource[5];
rx_r->start = KATANA_INTERNAL_SRAM_BASE +
(rx_size + tx_size) * pd->id;
rx_r->end = rx_r->start + rx_size - 1;
rx_r->flags = IORESOURCE_MEM;
tx_r = &pd->resource[6];
tx_r->start = rx_r->start + rx_size;
tx_r->end = tx_r->start + tx_size - 1;
tx_r->flags = IORESOURCE_MEM;
}
{ MV64XXX_ETH_NAME "0", katana_fixup_eth_pdata },
{ MV64XXX_ETH_NAME "1", katana_fixup_eth_pdata },
{ MV64XXX_ETH_NAME "2", katana_fixup_eth_pdata },
#endif
};
struct platform_device *pdev;
int i;
if (dev && dev->bus_id)
for (i=0; i<ARRAY_SIZE(dev_map); i++)
if (!strncmp(dev->bus_id, dev_map[i].bus_id,
BUS_ID_SIZE)) {
pdev = container_of(dev,
struct platform_device, dev);
dev_map[i].rtn(pdev);
}
return 0;
}
subsys_initcall(katana_fixup_pd);
static void
katana_restart(char *cmd)
{
......@@ -595,7 +616,7 @@ katana_calibrate_decr(void)
freq = katana_bus_freq() / 4;
printk("time_init: decrementer frequency = %lu.%.6lu MHz\n",
printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
freq / 1000000, freq % 1000000);
tb_ticks_per_jiffy = freq / HZ;
......@@ -654,7 +675,10 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
mv64x60_progress_init(KATANA_BRIDGE_REG_BASE);
#endif
katana_set_bat(); /* Need for katana_find_end_of_memory and progress */
#if defined(CONFIG_SERIAL_MPSC) || defined(CONFIG_MV643XX_ETH)
platform_notify = katana_platform_notify;
#endif
katana_set_bat(); /* Need for katana_find_end_of_memory and progress */
return;
}
arch/ppc/platforms/katana.h
View file @ 42537673
......@@ -107,6 +107,8 @@
#define KATANA_CPLD_RST_CMD_HR 0x01
#define KATANA_CPLD_BD_CFG_0_SYSCLK_MASK 0xc0
#define KATANA_CPLD_BD_CFG_0_SYSCLK_200 0x00
#define KATANA_CPLD_BD_CFG_0_SYSCLK_166 0x80
#define KATANA_CPLD_BD_CFG_0_SYSCLK_133 0xc0
#define KATANA_CPLD_BD_CFG_0_SYSCLK_100 0x40
......@@ -170,8 +172,8 @@
#define KATANA_PRODUCT_ID_750i 0x02
#define KATANA_PRODUCT_ID_752i 0x04
#define KATANA_ETH_TX_QUEUE_SIZE 1050
#define KATANA_ETH_RX_QUEUE_SIZE 450
#define KATANA_ETH_TX_QUEUE_SIZE 800
#define KATANA_ETH_RX_QUEUE_SIZE 400
#define KATANA_ETH_PORT_CONFIG_VALUE \
ETH_UNICAST_NORMAL_MODE | \
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7