Commit 42a0ae22 authored by Benjamin Herrenschmidt's avatar Benjamin Herrenschmidt

Merge commit 'kumar/next' into next

parents 412a4ac5 c4b6a776
...@@ -352,7 +352,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE ...@@ -352,7 +352,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE
config KEXEC config KEXEC
bool "kexec system call (EXPERIMENTAL)" bool "kexec system call (EXPERIMENTAL)"
depends on (PPC_BOOK3S || (FSL_BOOKE && !SMP)) && EXPERIMENTAL depends on (PPC_BOOK3S || FSL_BOOKE) && EXPERIMENTAL
help help
kexec is a system call that implements the ability to shutdown your kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot current kernel, and to start another kernel. It is like a reboot
...@@ -369,8 +369,8 @@ config KEXEC ...@@ -369,8 +369,8 @@ config KEXEC
config CRASH_DUMP config CRASH_DUMP
bool "Build a kdump crash kernel" bool "Build a kdump crash kernel"
depends on PPC64 || 6xx depends on PPC64 || 6xx || FSL_BOOKE
select RELOCATABLE if PPC64 select RELOCATABLE if PPC64 || FSL_BOOKE
help help
Build a kernel suitable for use as a kdump capture kernel. Build a kernel suitable for use as a kdump capture kernel.
The same kernel binary can be used as production kernel and dump The same kernel binary can be used as production kernel and dump
...@@ -898,7 +898,7 @@ config KERNEL_START_BOOL ...@@ -898,7 +898,7 @@ config KERNEL_START_BOOL
config KERNEL_START config KERNEL_START
hex "Virtual address of kernel base" if KERNEL_START_BOOL hex "Virtual address of kernel base" if KERNEL_START_BOOL
default PAGE_OFFSET if PAGE_OFFSET_BOOL default PAGE_OFFSET if PAGE_OFFSET_BOOL
default "0xc2000000" if CRASH_DUMP default "0xc2000000" if CRASH_DUMP && !RELOCATABLE
default "0xc0000000" default "0xc0000000"
config PHYSICAL_START_BOOL config PHYSICAL_START_BOOL
...@@ -911,7 +911,7 @@ config PHYSICAL_START_BOOL ...@@ -911,7 +911,7 @@ config PHYSICAL_START_BOOL
config PHYSICAL_START config PHYSICAL_START
hex "Physical address where the kernel is loaded" if PHYSICAL_START_BOOL hex "Physical address where the kernel is loaded" if PHYSICAL_START_BOOL
default "0x02000000" if PPC_STD_MMU && CRASH_DUMP default "0x02000000" if PPC_STD_MMU && CRASH_DUMP && !RELOCATABLE
default "0x00000000" default "0x00000000"
config PHYSICAL_ALIGN config PHYSICAL_ALIGN
......
/*
* MPC8308RDB Device Tree Source
*
* Copyright 2009 Freescale Semiconductor Inc.
* Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
compatible = "fsl,mpc8308rdb";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8308@0 {
device_type = "cpu";
reg = <0x0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
d-cache-size = <16384>;
i-cache-size = <16384>;
timebase-frequency = <0>; // from bootloader
bus-frequency = <0>; // from bootloader
clock-frequency = <0>; // from bootloader
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x08000000>; // 128MB at 0
};
localbus@e0005000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
reg = <0xe0005000 0x1000>;
interrupts = <77 0x8>;
interrupt-parent = <&ipic>;
// CS0 and CS1 are swapped when
// booting from nand, but the
// addresses are the same.
ranges = <0x0 0x0 0xfe000000 0x00800000
0x1 0x0 0xe0600000 0x00002000
0x2 0x0 0xf0000000 0x00020000
0x3 0x0 0xfa000000 0x00008000>;
flash@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x800000>;
bank-width = <2>;
device-width = <1>;
u-boot@0 {
reg = <0x0 0x60000>;
read-only;
};
env@60000 {
reg = <0x60000 0x10000>;
};
env1@70000 {
reg = <0x70000 0x10000>;
};
kernel@80000 {
reg = <0x80000 0x200000>;
};
dtb@280000 {
reg = <0x280000 0x10000>;
};
ramdisk@290000 {
reg = <0x290000 0x570000>;
};
};
nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8315-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x1 0x0 0x2000>;
jffs2@0 {
reg = <0x0 0x2000000>;
};
};
};
immr@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,mpc8315-immr", "simple-bus";
ranges = <0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>;
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
};
};
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&ipic>;
interrupts = <38 0x8>;
dr_mode = "peripheral";
phy_type = "ulpi";
};
enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x24000 0x1000>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = < &tbi0 >;
phy-handle = < &phy2 >;
fsl,magic-packet;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy2: ethernet-phy@2 {
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = < &tbi1 >;
/* Vitesse 7385 isn't on the MDIO bus */
fixed-link = <1 1 1000 0 0>;
fsl,magic-packet;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <133333333>;
interrupts = <9 0x8>;
interrupt-parent = <&ipic>;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <133333333>;
interrupts = <10 0x8>;
interrupt-parent = <&ipic>;
};
gpio@c00 {
#gpio-cells = <2>;
device_type = "gpio";
compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio";
reg = <0xc00 0x18>;
interrupts = <74 0x8>;
interrupt-parent = <&ipic>;
gpio-controller;
};
/* IPIC
* interrupts cell = <intr #, sense>
* sense values match linux IORESOURCE_IRQ_* defines:
* sense == 8: Level, low assertion
* sense == 2: Edge, high-to-low change
*/
ipic: interrupt-controller@700 {
compatible = "fsl,ipic";
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x700 0x100>;
device_type = "ipic";
};
ipic-msi@7c0 {
compatible = "fsl,ipic-msi";
reg = <0x7c0 0x40>;
msi-available-ranges = <0x0 0x100>;
interrupts = < 0x43 0x8
0x4 0x8
0x51 0x8
0x52 0x8
0x56 0x8
0x57 0x8
0x58 0x8
0x59 0x8 >;
interrupt-parent = < &ipic >;
};
};
pci0: pcie@e0009000 {
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie";
reg = <0xe0009000 0x00001000
0xb0000000 0x01000000>;
ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
bus-range = <0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <0 0 0 1 &ipic 1 8
0 0 0 2 &ipic 1 8
0 0 0 3 &ipic 1 8
0 0 0 4 &ipic 1 8>;
interrupts = <0x1 0x8>;
interrupt-parent = <&ipic>;
clock-frequency = <0>;
pcie@0 {
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
reg = <0 0 0 0 0>;
ranges = <0x02000000 0 0xa0000000
0x02000000 0 0xa0000000
0 0x10000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00800000>;
};
};
};
...@@ -71,14 +71,14 @@ ecm@1000 { ...@@ -71,14 +71,14 @@ ecm@1000 {
}; };
memory-controller@2000 { memory-controller@2000 {
compatible = "fsl,8540-memory-controller"; compatible = "fsl,mpc8540-memory-controller";
reg = <0x2000 0x1000>; reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
interrupts = <18 2>; interrupts = <18 2>;
}; };
L2: l2-cache-controller@20000 { L2: l2-cache-controller@20000 {
compatible = "fsl,8540-l2-cache-controller"; compatible = "fsl,mpc8540-l2-cache-controller";
reg = <0x20000 0x1000>; reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes cache-line-size = <32>; // 32 bytes
cache-size = <0x40000>; // L2, 256K cache-size = <0x40000>; // L2, 256K
......
...@@ -71,14 +71,14 @@ ecm@1000 { ...@@ -71,14 +71,14 @@ ecm@1000 {
}; };
memory-controller@2000 { memory-controller@2000 {
compatible = "fsl,8541-memory-controller"; compatible = "fsl,mpc8541-memory-controller";
reg = <0x2000 0x1000>; reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
interrupts = <18 2>; interrupts = <18 2>;
}; };
L2: l2-cache-controller@20000 { L2: l2-cache-controller@20000 {
compatible = "fsl,8541-l2-cache-controller"; compatible = "fsl,mpc8541-l2-cache-controller";
reg = <0x20000 0x1000>; reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes cache-line-size = <32>; // 32 bytes
cache-size = <0x40000>; // L2, 256K cache-size = <0x40000>; // L2, 256K
......
...@@ -73,14 +73,14 @@ ecm@1000 { ...@@ -73,14 +73,14 @@ ecm@1000 {
}; };
memory-controller@2000 { memory-controller@2000 {
compatible = "fsl,8544-memory-controller"; compatible = "fsl,mpc8544-memory-controller";
reg = <0x2000 0x1000>; reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
interrupts = <18 2>; interrupts = <18 2>;
}; };
L2: l2-cache-controller@20000 { L2: l2-cache-controller@20000 {
compatible = "fsl,8544-l2-cache-controller"; compatible = "fsl,mpc8544-l2-cache-controller";
reg = <0x20000 0x1000>; reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes cache-line-size = <32>; // 32 bytes
cache-size = <0x40000>; // L2, 256K cache-size = <0x40000>; // L2, 256K
......
...@@ -74,14 +74,14 @@ ecm@1000 { ...@@ -74,14 +74,14 @@ ecm@1000 {
}; };
memory-controller@2000 { memory-controller@2000 {
compatible = "fsl,8548-memory-controller"; compatible = "fsl,mpc8548-memory-controller";
reg = <0x2000 0x1000>; reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
interrupts = <18 2>; interrupts = <18 2>;
}; };
L2: l2-cache-controller@20000 { L2: l2-cache-controller@20000 {
compatible = "fsl,8548-l2-cache-controller"; compatible = "fsl,mpc8548-l2-cache-controller";
reg = <0x20000 0x1000>; reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes cache-line-size = <32>; // 32 bytes
cache-size = <0x80000>; // L2, 512K cache-size = <0x80000>; // L2, 512K
......
...@@ -71,14 +71,14 @@ ecm@1000 { ...@@ -71,14 +71,14 @@ ecm@1000 {
}; };
memory-controller@2000 { memory-controller@2000 {
compatible = "fsl,8555-memory-controller"; compatible = "fsl,mpc8555-memory-controller";
reg = <0x2000 0x1000>; reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
interrupts = <18 2>; interrupts = <18 2>;
}; };
L2: l2-cache-controller@20000 { L2: l2-cache-controller@20000 {
compatible = "fsl,8555-l2-cache-controller"; compatible = "fsl,mpc8555-l2-cache-controller";
reg = <0x20000 0x1000>; reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes cache-line-size = <32>; // 32 bytes
cache-size = <0x40000>; // L2, 256K cache-size = <0x40000>; // L2, 256K
......
...@@ -71,14 +71,14 @@ ecm@1000 { ...@@ -71,14 +71,14 @@ ecm@1000 {
}; };
memory-controller@2000 { memory-controller@2000 {
compatible = "fsl,8540-memory-controller"; compatible = "fsl,mpc8540-memory-controller";
reg = <0x2000 0x1000>; reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
interrupts = <18 2>; interrupts = <18 2>;
}; };
L2: l2-cache-controller@20000 { L2: l2-cache-controller@20000 {
compatible = "fsl,8540-l2-cache-controller"; compatible = "fsl,mpc8540-l2-cache-controller";
reg = <0x20000 0x1000>; reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes cache-line-size = <32>; // 32 bytes
cache-size = <0x40000>; // L2, 256K cache-size = <0x40000>; // L2, 256K
......
...@@ -124,14 +124,14 @@ ecm@1000 { ...@@ -124,14 +124,14 @@ ecm@1000 {
}; };
memory-controller@2000 { memory-controller@2000 {
compatible = "fsl,8568-memory-controller"; compatible = "fsl,mpc8568-memory-controller";
reg = <0x2000 0x1000>; reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
interrupts = <18 2>; interrupts = <18 2>;
}; };
L2: l2-cache-controller@20000 { L2: l2-cache-controller@20000 {
compatible = "fsl,8568-l2-cache-controller"; compatible = "fsl,mpc8568-l2-cache-controller";
reg = <0x20000 0x1000>; reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes cache-line-size = <32>; // 32 bytes
cache-size = <0x80000>; // L2, 512K cache-size = <0x80000>; // L2, 512K
......
...@@ -617,6 +617,7 @@ qe@ffe80000 { ...@@ -617,6 +617,7 @@ qe@ffe80000 {
bus-frequency = <0>; bus-frequency = <0>;
fsl,qe-num-riscs = <1>; fsl,qe-num-riscs = <1>;
fsl,qe-num-snums = <28>; fsl,qe-num-snums = <28>;
status = "disabled"; /* no firmware loaded */
qeic: interrupt-controller@80 { qeic: interrupt-controller@80 {
interrupt-controller; interrupt-controller;
......
This diff is collapsed.
/*
* MPC8555-based STx GP3 Device Tree Source
*
* Copyright 2006, 2008 Freescale Semiconductor Inc.
*
* Copyright 2010 Silicon Turnkey Express LLC.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "stx,gp3";
compatible = "stx,gp3-8560", "stx,gp3";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8555@0 {
device_type = "cpu";
reg = <0x0>;
d-cache-line-size = <32>; // 32 bytes
i-cache-line-size = <32>; // 32 bytes
d-cache-size = <0x8000>; // L1, 32K
i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>; // 33 MHz, from uboot
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
next-level-cache = <&L2>;
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
soc8555@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x100000>;
bus-frequency = <0>;
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <8>;
};
ecm@1000 {
compatible = "fsl,mpc8555-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <17 2>;
interrupt-parent = <&mpic>;
};
memory-controller@2000 {
compatible = "fsl,mpc8555-memory-controller";
reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
};
L2: l2-cache-controller@20000 {
compatible = "fsl,mpc8555-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x40000>; // L2, 256K
interrupt-parent = <&mpic>;
interrupts = <16 2>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
dma@21300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma";
reg = <0x21300 0x4>;
ranges = <0x0 0x21100 0x200>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8555-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
interrupt-parent = <&mpic>;
interrupts = <20 2>;
};
dma-channel@80 {
compatible = "fsl,mpc8555-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&mpic>;
interrupts = <21 2>;
};
dma-channel@100 {
compatible = "fsl,mpc8555-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&mpic>;
interrupts = <22 2>;
};
dma-channel@180 {
compatible = "fsl,mpc8555-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
interrupt-parent = <&mpic>;
interrupts = <23 2>;
};
};
enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@4 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x4>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
crypto@30000 {
compatible = "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <45 2>;
interrupt-parent = <&mpic>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x7e>;
fsl,descriptor-types-mask = <0x01010ebf>;
};
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
};
cpm@919c0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8555-cpm", "fsl,cpm2";
reg = <0x919c0 0x30>;
ranges;
muram@80000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x80000 0x10000>;
data@0 {
compatible = "fsl,cpm-muram-data";
reg = <0x0 0x2000 0x9000 0x1000>;
};
};
brg@919f0 {
compatible = "fsl,mpc8555-brg",
"fsl,cpm2-brg",
"fsl,cpm-brg";
reg = <0x919f0 0x10 0x915f0 0x10>;
};
cpmpic: pic@90c00 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
interrupts = <46 2>;
interrupt-parent = <&mpic>;
reg = <0x90c00 0x80>;
compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic";
};
};
};
pci0: pci@e0008000 {
interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x10 */
0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x11 */
0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x12 (Slot 1) */
0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x13 (Slot 2) */
0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
/* IDSEL 0x14 (Slot 3) */
0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x15 (Slot 4) */
0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
/* Bus 1 (Tundra Bridge) */
/* IDSEL 0x12 (ISA bridge) */
0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
interrupt-parent = <&mpic>;
interrupts = <24 2>;
bus-range = <0 0>;
ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xe0008000 0x1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
i8259@19000 {
interrupt-controller;
device_type = "interrupt-controller";
reg = <0x19000 0x0 0x0 0x0 0x1>;
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
interrupts = <1>;
interrupt-parent = <&pci0>;
};
};
pci1: pci@e0009000 {
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x15 */
0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
interrupt-parent = <&mpic>;
interrupts = <25 2>;
bus-range = <0 0>;
ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xe0009000 0x1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
};
};
...@@ -289,7 +289,14 @@ pci0: pci@e0008000 { ...@@ -289,7 +289,14 @@ pci0: pci@e0008000 {
interrupt-map = < interrupt-map = <
/* IDSEL 28 */ /* IDSEL 28 */
0xe000 0 0 1 &mpic 2 1 0xe000 0 0 1 &mpic 2 1
0xe000 0 0 2 &mpic 3 1>; 0xe000 0 0 2 &mpic 3 1
0xe000 0 0 3 &mpic 6 1
0xe000 0 0 4 &mpic 5 1
/* IDSEL 11 */
0x5800 0 0 1 &mpic 6 1
0x5800 0 0 2 &mpic 5 1
>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
interrupts = <24 2>; interrupts = <24 2>;
......
...@@ -311,7 +311,14 @@ pci0: pci@e0008000 { ...@@ -311,7 +311,14 @@ pci0: pci@e0008000 {
interrupt-map = < interrupt-map = <
/* IDSEL 28 */ /* IDSEL 28 */
0xe000 0 0 1 &mpic 2 1 0xe000 0 0 1 &mpic 2 1
0xe000 0 0 2 &mpic 3 1>; 0xe000 0 0 2 &mpic 3 1
0xe000 0 0 3 &mpic 6 1
0xe000 0 0 4 &mpic 5 1
/* IDSEL 11 */
0x5800 0 0 1 &mpic 6 1
0x5800 0 0 2 &mpic 5 1
>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
interrupts = <24 2>; interrupts = <24 2>;
......
...@@ -442,7 +442,14 @@ pci0: pci@a0008000 { ...@@ -442,7 +442,14 @@ pci0: pci@a0008000 {
interrupt-map = < interrupt-map = <
/* IDSEL 28 */ /* IDSEL 28 */
0xe000 0 0 1 &mpic 2 1 0xe000 0 0 1 &mpic 2 1
0xe000 0 0 2 &mpic 3 1>; 0xe000 0 0 2 &mpic 3 1
0xe000 0 0 3 &mpic 6 1
0xe000 0 0 4 &mpic 5 1
/* IDSEL 11 */
0x5800 0 0 1 &mpic 6 1
0x5800 0 0 2 &mpic 5 1
>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
interrupts = <24 2>; interrupts = <24 2>;
......
...@@ -442,7 +442,14 @@ pci0: pci@e0008000 { ...@@ -442,7 +442,14 @@ pci0: pci@e0008000 {
interrupt-map = < interrupt-map = <
/* IDSEL 28 */ /* IDSEL 28 */
0xe000 0 0 1 &mpic 2 1 0xe000 0 0 1 &mpic 2 1
0xe000 0 0 2 &mpic 3 1>; 0xe000 0 0 2 &mpic 3 1
0xe000 0 0 3 &mpic 6 1
0xe000 0 0 4 &mpic 5 1
/* IDSEL 11 */
0x5800 0 0 1 &mpic 6 1
0x5800 0 0 2 &mpic 5 1
>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
interrupts = <24 2>; interrupts = <24 2>;
......
...@@ -311,7 +311,14 @@ pci0: pci@e0008000 { ...@@ -311,7 +311,14 @@ pci0: pci@e0008000 {
interrupt-map = < interrupt-map = <
/* IDSEL 28 */ /* IDSEL 28 */
0xe000 0 0 1 &mpic 2 1 0xe000 0 0 1 &mpic 2 1
0xe000 0 0 2 &mpic 3 1>; 0xe000 0 0 2 &mpic 3 1
0xe000 0 0 3 &mpic 6 1
0xe000 0 0 4 &mpic 5 1
/* IDSEL 11 */
0x5800 0 0 1 &mpic 6 1
0x5800 0 0 2 &mpic 5 1
>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
interrupts = <24 2>; interrupts = <24 2>;
......
...@@ -382,7 +382,14 @@ pci0: pci@e0008000 { ...@@ -382,7 +382,14 @@ pci0: pci@e0008000 {
interrupt-map = < interrupt-map = <
/* IDSEL 28 */ /* IDSEL 28 */
0xe000 0 0 1 &mpic 2 1 0xe000 0 0 1 &mpic 2 1
0xe000 0 0 2 &mpic 3 1>; 0xe000 0 0 2 &mpic 3 1
0xe000 0 0 3 &mpic 6 1
0xe000 0 0 4 &mpic 5 1
/* IDSEL 11 */
0x5800 0 0 1 &mpic 6 1
0x5800 0 0 2 &mpic 5 1
>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
interrupts = <24 2>; interrupts = <24 2>;
......
/*
* TQM8XX Device Tree Source
*
* Heiko Schocher <hs@denx.de>
* 2010 DENX Software Engineering GmbH
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "TQM8xx";
compatible = "tqc,tqm8xx";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &eth0;
ethernet1 = &eth1;
mdio1 = &phy1;
serial0 = &smc1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,860@0 {
device_type = "cpu";
reg = <0x0>;
d-cache-line-size = <16>; // 16 bytes
i-cache-line-size = <16>; // 16 bytes
d-cache-size = <0x1000>; // L1, 4K
i-cache-size = <0x1000>; // L1, 4K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
interrupts = <15 2>; // decrementer interrupt
interrupt-parent = <&PIC>;
};
};
memory {
device_type = "memory";
reg = <0x0 0x2000000>;
};
localbus@fff00100 {
compatible = "fsl,mpc860-localbus", "fsl,pq1-localbus";
#address-cells = <2>;
#size-cells = <1>;
reg = <0xfff00100 0x40>;
ranges = <
0x0 0x0 0x40000000 0x800000
>;
flash@0,0 {
compatible = "cfi-flash";
reg = <0 0 0x800000>;
#address-cells = <1>;
#size-cells = <1>;
bank-width = <4>;
device-width = <2>;
};
};
soc@fff00000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
ranges = <0x0 0xfff00000 0x00004000>;
phy1: mdio@e00 {
compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio";
reg = <0xe00 0x188>;
#address-cells = <1>;
#size-cells = <0>;
PHY: ethernet-phy@f {
reg = <0xf>;
device_type = "ethernet-phy";
};
};
eth1: ethernet@e00 {
device_type = "network";
compatible = "fsl,mpc866-fec-enet",
"fsl,pq1-fec-enet";
reg = <0xe00 0x188>;
interrupts = <3 1>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY>;
linux,network-index = <1>;
};
PIC: pic@0 {
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0x24>;
compatible = "fsl,mpc860-pic", "fsl,pq1-pic";
};
cpm@9c0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc860-cpm", "fsl,cpm1";
ranges;
reg = <0x9c0 0x40>;
brg-frequency = <0>;
interrupts = <0 2>; // cpm error interrupt
interrupt-parent = <&CPM_PIC>;
muram@2000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x2000 0x2000>;
data@0 {
compatible = "fsl,cpm-muram-data";
reg = <0x0 0x2000>;
};
};
brg@9f0 {
compatible = "fsl,mpc860-brg",
"fsl,cpm1-brg",
"fsl,cpm-brg";
reg = <0x9f0 0x10>;
clock-frequency = <0>;
};
CPM_PIC: pic@930 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
interrupts = <5 2 0 2>;
interrupt-parent = <&PIC>;
reg = <0x930 0x20>;
compatible = "fsl,mpc860-cpm-pic",
"fsl,cpm1-pic";
};
smc1: serial@a80 {
device_type = "serial";
compatible = "fsl,mpc860-smc-uart",
"fsl,cpm1-smc-uart";
reg = <0xa80 0x10 0x3e80 0x40>;
interrupts = <4>;
interrupt-parent = <&CPM_PIC>;
fsl,cpm-brg = <1>;
fsl,cpm-command = <0x90>;
};
eth0: ethernet@a00 {
device_type = "network";
compatible = "fsl,mpc860-scc-enet",
"fsl,cpm1-scc-enet";
reg = <0xa00 0x18 0x3c00 0x100>;
interrupts = <30>;
interrupt-parent = <&CPM_PIC>;
fsl,cpm-command = <0000>;
linux,network-index = <0>;
fixed-link = <0 0 10 0 0>;
};
};
};
};
...@@ -19,7 +19,8 @@ CONFIG_E500=y ...@@ -19,7 +19,8 @@ CONFIG_E500=y
CONFIG_FSL_EMB_PERFMON=y CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y CONFIG_FSL_BOOKE=y
# CONFIG_PHYS_64BIT is not set CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_SPE=y CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y CONFIG_PPC_MMU_NOHASH=y
CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_MMU_NOHASH_32=y
...@@ -28,7 +29,7 @@ CONFIG_PPC_BOOK3E_MMU=y ...@@ -28,7 +29,7 @@ CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_SMP is not set # CONFIG_SMP is not set
CONFIG_PPC32=y CONFIG_PPC32=y
CONFIG_WORD_SIZE=32 CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME=y
...@@ -239,6 +240,7 @@ CONFIG_MPC85xx_MDS=y ...@@ -239,6 +240,7 @@ CONFIG_MPC85xx_MDS=y
CONFIG_MPC8536_DS=y CONFIG_MPC8536_DS=y
CONFIG_MPC85xx_DS=y CONFIG_MPC85xx_DS=y
CONFIG_MPC85xx_RDB=y CONFIG_MPC85xx_RDB=y
CONFIG_P1022_DS=y
CONFIG_SOCRATES=y CONFIG_SOCRATES=y
CONFIG_KSI8560=y CONFIG_KSI8560=y
CONFIG_XES_MPC85xx=y CONFIG_XES_MPC85xx=y
...@@ -311,7 +313,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y ...@@ -311,7 +313,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1 CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y CONFIG_VIRT_TO_BUS=y
...@@ -321,7 +323,7 @@ CONFIG_PPC_4K_PAGES=y ...@@ -321,7 +323,7 @@ CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set
# CONFIG_PPC_256K_PAGES is not set # CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_FORCE_MAX_ZONEORDER=12
CONFIG_PROC_DEVICETREE=y CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set # CONFIG_CMDLINE_BOOL is not set
CONFIG_EXTRA_TARGETS="" CONFIG_EXTRA_TARGETS=""
...@@ -1122,16 +1124,13 @@ CONFIG_VGA_CONSOLE=y ...@@ -1122,16 +1124,13 @@ CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set # CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=y CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y # CONFIG_SOUND_OSS_CORE is not set
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y CONFIG_SND=y
CONFIG_SND_TIMER=y CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y CONFIG_SND_PCM=y
# CONFIG_SND_SEQUENCER is not set # CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y # CONFIG_SND_MIXER_OSS is not set
CONFIG_SND_MIXER_OSS=y # CONFIG_SND_PCM_OSS is not set
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_HRTIMER is not set # CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set # CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set # CONFIG_SND_SUPPORT_OLD_API is not set
...@@ -1145,12 +1144,7 @@ CONFIG_SND_VMASTER=y ...@@ -1145,12 +1144,7 @@ CONFIG_SND_VMASTER=y
# CONFIG_SND_SBAWE_SEQ is not set # CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set # CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_AC97_CODEC=y CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y # CONFIG_SND_DRIVERS is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_PCI=y CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set # CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS300 is not set
...@@ -1218,12 +1212,8 @@ CONFIG_SND_INTEL8X0=y ...@@ -1218,12 +1212,8 @@ CONFIG_SND_INTEL8X0=y
# CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set # CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set # CONFIG_SND_YMFPCI is not set
CONFIG_SND_PPC=y # CONFIG_SND_PPC is not set
CONFIG_SND_USB=y # CONFIG_SND_USB is not set
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_SOC is not set # CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set # CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y CONFIG_AC97_BUS=y
......
...@@ -19,7 +19,8 @@ CONFIG_E500=y ...@@ -19,7 +19,8 @@ CONFIG_E500=y
CONFIG_FSL_EMB_PERFMON=y CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y CONFIG_FSL_BOOKE=y
# CONFIG_PHYS_64BIT is not set CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_SPE=y CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y CONFIG_PPC_MMU_NOHASH=y
CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_MMU_NOHASH_32=y
...@@ -29,7 +30,7 @@ CONFIG_SMP=y ...@@ -29,7 +30,7 @@ CONFIG_SMP=y
CONFIG_NR_CPUS=8 CONFIG_NR_CPUS=8
CONFIG_PPC32=y CONFIG_PPC32=y
CONFIG_WORD_SIZE=32 CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME=y
...@@ -243,6 +244,7 @@ CONFIG_MPC85xx_MDS=y ...@@ -243,6 +244,7 @@ CONFIG_MPC85xx_MDS=y
CONFIG_MPC8536_DS=y CONFIG_MPC8536_DS=y
CONFIG_MPC85xx_DS=y CONFIG_MPC85xx_DS=y
CONFIG_MPC85xx_RDB=y CONFIG_MPC85xx_RDB=y
CONFIG_P1022_DS=y
CONFIG_SOCRATES=y CONFIG_SOCRATES=y
CONFIG_KSI8560=y CONFIG_KSI8560=y
CONFIG_XES_MPC85xx=y CONFIG_XES_MPC85xx=y
...@@ -316,7 +318,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y ...@@ -316,7 +318,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1 CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y CONFIG_VIRT_TO_BUS=y
...@@ -326,7 +328,7 @@ CONFIG_PPC_4K_PAGES=y ...@@ -326,7 +328,7 @@ CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set
# CONFIG_PPC_256K_PAGES is not set # CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_FORCE_MAX_ZONEORDER=12
CONFIG_PROC_DEVICETREE=y CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set # CONFIG_CMDLINE_BOOL is not set
CONFIG_EXTRA_TARGETS="" CONFIG_EXTRA_TARGETS=""
...@@ -1127,16 +1129,13 @@ CONFIG_VGA_CONSOLE=y ...@@ -1127,16 +1129,13 @@ CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set # CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=y CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y # CONFIG_SOUND_OSS_CORE is not set
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y CONFIG_SND=y
CONFIG_SND_TIMER=y CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y CONFIG_SND_PCM=y
# CONFIG_SND_SEQUENCER is not set # CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y # CONFIG_SND_MIXER_OSS is not set
CONFIG_SND_MIXER_OSS=y # CONFIG_SND_PCM_OSS is not set
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_HRTIMER is not set # CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set # CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set # CONFIG_SND_SUPPORT_OLD_API is not set
...@@ -1150,12 +1149,7 @@ CONFIG_SND_VMASTER=y ...@@ -1150,12 +1149,7 @@ CONFIG_SND_VMASTER=y
# CONFIG_SND_SBAWE_SEQ is not set # CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set # CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_AC97_CODEC=y CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y # CONFIG_SND_DRIVERS is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_PCI=y CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set # CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS300 is not set
...@@ -1223,12 +1217,8 @@ CONFIG_SND_INTEL8X0=y ...@@ -1223,12 +1217,8 @@ CONFIG_SND_INTEL8X0=y
# CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set # CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set # CONFIG_SND_YMFPCI is not set
CONFIG_SND_PPC=y # CONFIG_SND_PPC is not set
CONFIG_SND_USB=y # CONFIG_SND_USB is not set
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_SOC is not set # CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set # CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y CONFIG_AC97_BUS=y
......
This diff is collapsed.
...@@ -9,6 +9,14 @@ menuconfig PPC_83xx ...@@ -9,6 +9,14 @@ menuconfig PPC_83xx
if PPC_83xx if PPC_83xx
config MPC830x_RDB
bool "Freescale MPC830x RDB"
select DEFAULT_UIMAGE
select PPC_MPC831x
select FSL_GTM
help
This option enables support for the MPC8308 RDB board.
config MPC831x_RDB config MPC831x_RDB
bool "Freescale MPC831x RDB" bool "Freescale MPC831x RDB"
select DEFAULT_UIMAGE select DEFAULT_UIMAGE
......
...@@ -4,6 +4,7 @@ ...@@ -4,6 +4,7 @@
obj-y := misc.o usb.o obj-y := misc.o usb.o
obj-$(CONFIG_SUSPEND) += suspend.o suspend-asm.o obj-$(CONFIG_SUSPEND) += suspend.o suspend-asm.o
obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o
obj-$(CONFIG_MPC830x_RDB) += mpc830x_rdb.o
obj-$(CONFIG_MPC831x_RDB) += mpc831x_rdb.o obj-$(CONFIG_MPC831x_RDB) += mpc831x_rdb.o
obj-$(CONFIG_MPC832x_RDB) += mpc832x_rdb.o obj-$(CONFIG_MPC832x_RDB) += mpc832x_rdb.o
obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o
......
/*
* arch/powerpc/platforms/83xx/mpc830x_rdb.c
*
* Description: MPC830x RDB board specific routines.
* This file is based on mpc831x_rdb.c
*
* Copyright (C) Freescale Semiconductor, Inc. 2009. All rights reserved.
* Copyright (C) 2010. Ilya Yanok, Emcraft Systems, yanok@emcraft.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/pci.h>
#include <linux/of_platform.h>
#include <asm/time.h>
#include <asm/ipic.h>
#include <asm/udbg.h>
#include <sysdev/fsl_pci.h>
#include <sysdev/fsl_soc.h>
#include "mpc83xx.h"
/*
* Setup the architecture
*/
static void __init mpc830x_rdb_setup_arch(void)
{
#ifdef CONFIG_PCI
struct device_node *np;
#endif
if (ppc_md.progress)
ppc_md.progress("mpc830x_rdb_setup_arch()", 0);
#ifdef CONFIG_PCI
for_each_compatible_node(np, "pci", "fsl,mpc8308-pcie")
mpc83xx_add_bridge(np);
#endif
mpc831x_usb_cfg();
}
static void __init mpc830x_rdb_init_IRQ(void)
{
struct device_node *np;
np = of_find_node_by_type(NULL, "ipic");
if (!np)
return;
ipic_init(np, 0);
/* Initialize the default interrupt mapping priorities,
* in case the boot rom changed something on us.
*/
ipic_set_default_priority();
}
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
static int __init mpc830x_rdb_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "MPC8308RDB") ||
of_flat_dt_is_compatible(root, "fsl,mpc8308rdb");
}
static struct of_device_id __initdata of_bus_ids[] = {
{ .compatible = "simple-bus" },
{ .compatible = "gianfar" },
{},
};
static int __init declare_of_platform_devices(void)
{
of_platform_bus_probe(NULL, of_bus_ids, NULL);
return 0;
}
machine_device_initcall(mpc830x_rdb, declare_of_platform_devices);
define_machine(mpc830x_rdb) {
.name = "MPC830x RDB",
.probe = mpc830x_rdb_probe,
.setup_arch = mpc830x_rdb_setup_arch,
.init_IRQ = mpc830x_rdb_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
...@@ -65,6 +65,14 @@ config MPC85xx_RDB ...@@ -65,6 +65,14 @@ config MPC85xx_RDB
help help
This option enables support for the MPC85xx RDB (P2020 RDB) board This option enables support for the MPC85xx RDB (P2020 RDB) board
config P1022_DS
bool "Freescale P1022 DS"
select DEFAULT_UIMAGE
select CONFIG_PHYS_64BIT # The DTS has 36-bit addresses
select SWIOTLB
help
This option enables support for the Freescale P1022DS reference board.
config SOCRATES config SOCRATES
bool "Socrates" bool "Socrates"
select DEFAULT_UIMAGE select DEFAULT_UIMAGE
......
...@@ -10,6 +10,7 @@ obj-$(CONFIG_MPC8536_DS) += mpc8536_ds.o ...@@ -10,6 +10,7 @@ obj-$(CONFIG_MPC8536_DS) += mpc8536_ds.o
obj-$(CONFIG_MPC85xx_DS) += mpc85xx_ds.o obj-$(CONFIG_MPC85xx_DS) += mpc85xx_ds.o
obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o
obj-$(CONFIG_P1022_DS) += p1022_ds.o
obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o
obj-$(CONFIG_STX_GP3) += stx_gp3.o obj-$(CONFIG_STX_GP3) += stx_gp3.o
obj-$(CONFIG_TQM85xx) += tqm85xx.o obj-$(CONFIG_TQM85xx) += tqm85xx.o
......
...@@ -158,73 +158,41 @@ static int mpc8568_mds_phy_fixups(struct phy_device *phydev) ...@@ -158,73 +158,41 @@ static int mpc8568_mds_phy_fixups(struct phy_device *phydev)
extern void __init mpc85xx_smp_init(void); extern void __init mpc85xx_smp_init(void);
#endif #endif
static void __init mpc85xx_mds_setup_arch(void) #ifdef CONFIG_QUICC_ENGINE
static struct of_device_id mpc85xx_qe_ids[] __initdata = {
{ .type = "qe", },
{ .compatible = "fsl,qe", },
{ },
};
static void __init mpc85xx_publish_qe_devices(void)
{ {
struct device_node *np; struct device_node *np;
static u8 __iomem *bcsr_regs = NULL;
#ifdef CONFIG_PCI
struct pci_controller *hose;
#endif
dma_addr_t max = 0xffffffff;
if (ppc_md.progress)
ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
/* Map BCSR area */
np = of_find_node_by_name(NULL, "bcsr");
if (np != NULL) {
struct resource res;
of_address_to_resource(np, 0, &res); np = of_find_compatible_node(NULL, NULL, "fsl,qe");
bcsr_regs = ioremap(res.start, res.end - res.start +1); if (!of_device_is_available(np)) {
of_node_put(np); of_node_put(np);
return;
} }
#ifdef CONFIG_PCI of_platform_bus_probe(NULL, mpc85xx_qe_ids, NULL);
for_each_node_by_type(np, "pci") { }
if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
struct resource rsrc;
of_address_to_resource(np, 0, &rsrc);
if ((rsrc.start & 0xfffff) == 0x8000)
fsl_add_bridge(np, 1);
else
fsl_add_bridge(np, 0);
hose = pci_find_hose_for_OF_device(np);
max = min(max, hose->dma_window_base_cur +
hose->dma_window_size);
}
}
#endif
#ifdef CONFIG_SMP static void __init mpc85xx_mds_reset_ucc_phys(void)
mpc85xx_smp_init(); {
#endif struct device_node *np;
static u8 __iomem *bcsr_regs;
#ifdef CONFIG_QUICC_ENGINE /* Map BCSR area */
np = of_find_compatible_node(NULL, NULL, "fsl,qe"); np = of_find_node_by_name(NULL, "bcsr");
if (!np) {
np = of_find_node_by_name(NULL, "qe");
if (!np) if (!np)
return; return;
}
qe_reset(); bcsr_regs = of_iomap(np, 0);
of_node_put(np); of_node_put(np);
if (!bcsr_regs)
return;
np = of_find_node_by_name(NULL, "par_io");
if (np) {
struct device_node *ucc;
par_io_init(np);
of_node_put(np);
for_each_node_by_name(ucc, "ucc")
par_io_of_config(ucc);
}
if (bcsr_regs) {
if (machine_is(mpc8568_mds)) { if (machine_is(mpc8568_mds)) {
#define BCSR_UCC1_GETH_EN (0x1 << 7) #define BCSR_UCC1_GETH_EN (0x1 << 7)
#define BCSR_UCC2_GETH_EN (0x1 << 7) #define BCSR_UCC2_GETH_EN (0x1 << 7)
...@@ -278,7 +246,6 @@ static void __init mpc85xx_mds_setup_arch(void) ...@@ -278,7 +246,6 @@ static void __init mpc85xx_mds_setup_arch(void)
clrsetbits_8(&bcsr_regs[7 + ucc_num], clrsetbits_8(&bcsr_regs[7 + ucc_num],
BCSR_UCC_RGMII, BCSR_UCC_RTBI); BCSR_UCC_RGMII, BCSR_UCC_RTBI);
} }
} else if (machine_is(p1021_mds)) { } else if (machine_is(p1021_mds)) {
#define BCSR11_ENET_MICRST (0x1 << 5) #define BCSR11_ENET_MICRST (0x1 << 5)
/* Reset Micrel PHY */ /* Reset Micrel PHY */
...@@ -287,8 +254,40 @@ static void __init mpc85xx_mds_setup_arch(void) ...@@ -287,8 +254,40 @@ static void __init mpc85xx_mds_setup_arch(void)
} }
iounmap(bcsr_regs); iounmap(bcsr_regs);
}
static void __init mpc85xx_mds_qe_init(void)
{
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "fsl,qe");
if (!np) {
np = of_find_node_by_name(NULL, "qe");
if (!np)
return;
} }
if (!of_device_is_available(np)) {
of_node_put(np);
return;
}
qe_reset();
of_node_put(np);
np = of_find_node_by_name(NULL, "par_io");
if (np) {
struct device_node *ucc;
par_io_init(np);
of_node_put(np);
for_each_node_by_name(ucc, "ucc")
par_io_of_config(ucc);
}
mpc85xx_mds_reset_ucc_phys();
if (machine_is(p1021_mds)) { if (machine_is(p1021_mds)) {
#define MPC85xx_PMUXCR_OFFSET 0x60 #define MPC85xx_PMUXCR_OFFSET 0x60
#define MPC85xx_PMUXCR_QE0 0x00008000 #define MPC85xx_PMUXCR_QE0 0x00008000
...@@ -322,8 +321,72 @@ static void __init mpc85xx_mds_setup_arch(void) ...@@ -322,8 +321,72 @@ static void __init mpc85xx_mds_setup_arch(void)
} }
} }
}
static void __init mpc85xx_mds_qeic_init(void)
{
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "fsl,qe");
if (!of_device_is_available(np)) {
of_node_put(np);
return;
}
np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
if (!np) {
np = of_find_node_by_type(NULL, "qeic");
if (!np)
return;
}
if (machine_is(p1021_mds))
qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
qe_ic_cascade_high_mpic);
else
qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
of_node_put(np);
}
#else
static void __init mpc85xx_publish_qe_devices(void) { }
static void __init mpc85xx_mds_qe_init(void) { }
static void __init mpc85xx_mds_qeic_init(void) { }
#endif /* CONFIG_QUICC_ENGINE */ #endif /* CONFIG_QUICC_ENGINE */
static void __init mpc85xx_mds_setup_arch(void)
{
#ifdef CONFIG_PCI
struct pci_controller *hose;
#endif
dma_addr_t max = 0xffffffff;
if (ppc_md.progress)
ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
#ifdef CONFIG_PCI
for_each_node_by_type(np, "pci") {
if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
struct resource rsrc;
of_address_to_resource(np, 0, &rsrc);
if ((rsrc.start & 0xfffff) == 0x8000)
fsl_add_bridge(np, 1);
else
fsl_add_bridge(np, 0);
hose = pci_find_hose_for_OF_device(np);
max = min(max, hose->dma_window_base_cur +
hose->dma_window_size);
}
}
#endif
#ifdef CONFIG_SMP
mpc85xx_smp_init();
#endif
mpc85xx_mds_qe_init();
#ifdef CONFIG_SWIOTLB #ifdef CONFIG_SWIOTLB
if (memblock_end_of_DRAM() > max) { if (memblock_end_of_DRAM() > max) {
ppc_swiotlb_enable = 1; ppc_swiotlb_enable = 1;
...@@ -369,8 +432,6 @@ static struct of_device_id mpc85xx_ids[] = { ...@@ -369,8 +432,6 @@ static struct of_device_id mpc85xx_ids[] = {
{ .type = "soc", }, { .type = "soc", },
{ .compatible = "soc", }, { .compatible = "soc", },
{ .compatible = "simple-bus", }, { .compatible = "simple-bus", },
{ .type = "qe", },
{ .compatible = "fsl,qe", },
{ .compatible = "gianfar", }, { .compatible = "gianfar", },
{ .compatible = "fsl,rapidio-delta", }, { .compatible = "fsl,rapidio-delta", },
{ .compatible = "fsl,mpc8548-guts", }, { .compatible = "fsl,mpc8548-guts", },
...@@ -382,8 +443,6 @@ static struct of_device_id p1021_ids[] = { ...@@ -382,8 +443,6 @@ static struct of_device_id p1021_ids[] = {
{ .type = "soc", }, { .type = "soc", },
{ .compatible = "soc", }, { .compatible = "soc", },
{ .compatible = "simple-bus", }, { .compatible = "simple-bus", },
{ .type = "qe", },
{ .compatible = "fsl,qe", },
{ .compatible = "gianfar", }, { .compatible = "gianfar", },
{}, {},
}; };
...@@ -395,16 +454,16 @@ static int __init mpc85xx_publish_devices(void) ...@@ -395,16 +454,16 @@ static int __init mpc85xx_publish_devices(void)
if (machine_is(mpc8569_mds)) if (machine_is(mpc8569_mds))
simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio"); simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
/* Publish the QE devices */
of_platform_bus_probe(NULL, mpc85xx_ids, NULL); of_platform_bus_probe(NULL, mpc85xx_ids, NULL);
mpc85xx_publish_qe_devices();
return 0; return 0;
} }
static int __init p1021_publish_devices(void) static int __init p1021_publish_devices(void)
{ {
/* Publish the QE devices */
of_platform_bus_probe(NULL, p1021_ids, NULL); of_platform_bus_probe(NULL, p1021_ids, NULL);
mpc85xx_publish_qe_devices();
return 0; return 0;
} }
...@@ -441,21 +500,7 @@ static void __init mpc85xx_mds_pic_init(void) ...@@ -441,21 +500,7 @@ static void __init mpc85xx_mds_pic_init(void)
of_node_put(np); of_node_put(np);
mpic_init(mpic); mpic_init(mpic);
mpc85xx_mds_qeic_init();
#ifdef CONFIG_QUICC_ENGINE
np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
if (!np) {
np = of_find_node_by_type(NULL, "qeic");
if (!np)
return;
}
if (machine_is(p1021_mds))
qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
qe_ic_cascade_high_mpic);
else
qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
of_node_put(np);
#endif /* CONFIG_QUICC_ENGINE */
} }
static int __init mpc85xx_mds_probe(void) static int __init mpc85xx_mds_probe(void)
......
/*
* P1022DS board specific routines
*
* Authors: Travis Wheatley <travis.wheatley@freescale.com>
* Dave Liu <daveliu@freescale.com>
* Timur Tabi <timur@freescale.com>
*
* Copyright 2010 Freescale Semiconductor, Inc.
*
* This file is taken from the Freescale P1022DS BSP, with modifications:
* 1) No DIU support (pending rewrite of DIU code)
* 2) No AMP support
* 3) No PCI endpoint support
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include <linux/pci.h>
#include <linux/of_platform.h>
#include <linux/lmb.h>
#include <asm/mpic.h>
#include <asm/swiotlb.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
void __init p1022_ds_pic_init(void)
{
struct mpic *mpic;
struct resource r;
struct device_node *np;
np = of_find_node_by_type(NULL, "open-pic");
if (!np) {
pr_err("Could not find open-pic node\n");
return;
}
if (of_address_to_resource(np, 0, &r)) {
pr_err("Failed to map mpic register space\n");
of_node_put(np);
return;
}
mpic = mpic_alloc(np, r.start,
MPIC_PRIMARY | MPIC_WANTS_RESET |
MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
of_node_put(np);
mpic_init(mpic);
}
#ifdef CONFIG_SMP
void __init mpc85xx_smp_init(void);
#endif
/*
* Setup the architecture
*/
static void __init p1022_ds_setup_arch(void)
{
#ifdef CONFIG_PCI
struct device_node *np;
#endif
dma_addr_t max = 0xffffffff;
if (ppc_md.progress)
ppc_md.progress("p1022_ds_setup_arch()", 0);
#ifdef CONFIG_PCI
for_each_compatible_node(np, "pci", "fsl,p1022-pcie") {
struct resource rsrc;
struct pci_controller *hose;
of_address_to_resource(np, 0, &rsrc);
if ((rsrc.start & 0xfffff) == 0x8000)
fsl_add_bridge(np, 1);
else
fsl_add_bridge(np, 0);
hose = pci_find_hose_for_OF_device(np);
max = min(max, hose->dma_window_base_cur +
hose->dma_window_size);
}
#endif
#ifdef CONFIG_SMP
mpc85xx_smp_init();
#endif
#ifdef CONFIG_SWIOTLB
if (lmb_end_of_DRAM() > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
}
#endif
pr_info("Freescale P1022 DS reference board\n");
}
static struct of_device_id __initdata p1022_ds_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
{ .compatible = "simple-bus", },
{ .compatible = "gianfar", },
{},
};
static int __init p1022_ds_publish_devices(void)
{
return of_platform_bus_probe(NULL, p1022_ds_ids, NULL);
}
machine_device_initcall(p1022_ds, p1022_ds_publish_devices);
machine_arch_initcall(p1022_ds, swiotlb_setup_bus_notifier);
/*
* Called very early, device-tree isn't unflattened
*/
static int __init p1022_ds_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "fsl,p1022ds");
}
define_machine(p1022_ds) {
.name = "P1022 DS",
.probe = p1022_ds_probe,
.setup_arch = p1022_ds_setup_arch,
.init_IRQ = p1022_ds_pic_init,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
#endif
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
...@@ -15,6 +15,7 @@ ...@@ -15,6 +15,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/of.h> #include <linux/of.h>
#include <linux/kexec.h>
#include <asm/machdep.h> #include <asm/machdep.h>
#include <asm/pgtable.h> #include <asm/pgtable.h>
...@@ -24,6 +25,7 @@ ...@@ -24,6 +25,7 @@
#include <asm/dbell.h> #include <asm/dbell.h>
#include <sysdev/fsl_soc.h> #include <sysdev/fsl_soc.h>
#include <sysdev/mpic.h>
extern void __early_start(void); extern void __early_start(void);
...@@ -105,8 +107,64 @@ smp_85xx_setup_cpu(int cpu_nr) ...@@ -105,8 +107,64 @@ smp_85xx_setup_cpu(int cpu_nr)
struct smp_ops_t smp_85xx_ops = { struct smp_ops_t smp_85xx_ops = {
.kick_cpu = smp_85xx_kick_cpu, .kick_cpu = smp_85xx_kick_cpu,
#ifdef CONFIG_KEXEC
.give_timebase = smp_generic_give_timebase,
.take_timebase = smp_generic_take_timebase,
#endif
}; };
#ifdef CONFIG_KEXEC
static int kexec_down_cpus = 0;
void mpc85xx_smp_kexec_cpu_down(int crash_shutdown, int secondary)
{
mpic_teardown_this_cpu(1);
/* When crashing, this gets called on all CPU's we only
* take down the non-boot cpus */
if (smp_processor_id() != boot_cpuid)
{
local_irq_disable();
kexec_down_cpus++;
while (1);
}
}
static void mpc85xx_smp_kexec_down(void *arg)
{
if (ppc_md.kexec_cpu_down)
ppc_md.kexec_cpu_down(0,1);
}
static void mpc85xx_smp_machine_kexec(struct kimage *image)
{
int timeout = 2000;
int i;
set_cpus_allowed(current, cpumask_of_cpu(boot_cpuid));
smp_call_function(mpc85xx_smp_kexec_down, NULL, 0);
while ( (kexec_down_cpus != (num_online_cpus() - 1)) &&
( timeout > 0 ) )
{
timeout--;
}
if ( !timeout )
printk(KERN_ERR "Unable to bring down secondary cpu(s)");
for (i = 0; i < num_present_cpus(); i++)
{
if ( i == smp_processor_id() ) continue;
mpic_reset_core(i);
}
default_machine_kexec(image);
}
#endif /* CONFIG_KEXEC */
void __init mpc85xx_smp_init(void) void __init mpc85xx_smp_init(void)
{ {
struct device_node *np; struct device_node *np;
...@@ -124,4 +182,9 @@ void __init mpc85xx_smp_init(void) ...@@ -124,4 +182,9 @@ void __init mpc85xx_smp_init(void)
BUG_ON(!smp_85xx_ops.message_pass); BUG_ON(!smp_85xx_ops.message_pass);
smp_ops = &smp_85xx_ops; smp_ops = &smp_85xx_ops;
#ifdef CONFIG_KEXEC
ppc_md.kexec_cpu_down = mpc85xx_smp_kexec_cpu_down;
ppc_md.machine_kexec = mpc85xx_smp_machine_kexec;
#endif
} }
...@@ -151,6 +151,27 @@ static void tqm85xx_show_cpuinfo(struct seq_file *m) ...@@ -151,6 +151,27 @@ static void tqm85xx_show_cpuinfo(struct seq_file *m)
seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
} }
static void __init tqm85xx_ti1520_fixup(struct pci_dev *pdev)
{
unsigned int val;
/* Do not do the fixup on other platforms! */
if (!machine_is(tqm85xx))
return;
dev_info(&pdev->dev, "Using TI 1520 fixup on TQM85xx\n");
/*
* Enable P2CCLK bit in system control register
* to enable CLOCK output to power chip
*/
pci_read_config_dword(pdev, 0x80, &val);
pci_write_config_dword(pdev, 0x80, val | (1 << 27));
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1520,
tqm85xx_ti1520_fixup);
static struct of_device_id __initdata of_bus_ids[] = { static struct of_device_id __initdata of_bus_ids[] = {
{ .compatible = "simple-bus", }, { .compatible = "simple-bus", },
{ .compatible = "gianfar", }, { .compatible = "gianfar", },
......
...@@ -55,6 +55,12 @@ config PPC_MGSUVD ...@@ -55,6 +55,12 @@ config PPC_MGSUVD
help help
This enables support for the Keymile MGSUVD board. This enables support for the Keymile MGSUVD board.
config TQM8XX
bool "TQM8XX"
select CPM1
help
support for the mpc8xx based boards from TQM.
endchoice endchoice
menu "Freescale Ethernet driver platform-specific options" menu "Freescale Ethernet driver platform-specific options"
......
...@@ -7,3 +7,4 @@ obj-$(CONFIG_MPC86XADS) += mpc86xads_setup.o ...@@ -7,3 +7,4 @@ obj-$(CONFIG_MPC86XADS) += mpc86xads_setup.o
obj-$(CONFIG_PPC_EP88XC) += ep88xc.o obj-$(CONFIG_PPC_EP88XC) += ep88xc.o
obj-$(CONFIG_PPC_ADDER875) += adder875.o obj-$(CONFIG_PPC_ADDER875) += adder875.o
obj-$(CONFIG_PPC_MGSUVD) += mgsuvd.o obj-$(CONFIG_PPC_MGSUVD) += mgsuvd.o
obj-$(CONFIG_TQM8XX) += tqm8xx_setup.o
/*
* Platform setup for the MPC8xx based boards from TQM.
*
* Heiko Schocher <hs@denx.de>
* Copyright 2010 DENX Software Engineering GmbH
*
* based on:
* Vitaly Bordug <vbordug@ru.mvista.com>
*
* Copyright 2005 MontaVista Software Inc.
*
* Heavily modified by Scott Wood <scottwood@freescale.com>
* Copyright 2007 Freescale Semiconductor, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/ioport.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/fs_enet_pd.h>
#include <linux/fs_uart_pd.h>
#include <linux/fsl_devices.h>
#include <linux/mii.h>
#include <linux/of_platform.h>
#include <asm/delay.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/page.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/time.h>
#include <asm/mpc8xx.h>
#include <asm/8xx_immap.h>
#include <asm/cpm1.h>
#include <asm/fs_pd.h>
#include <asm/udbg.h>
#include "mpc8xx.h"
struct cpm_pin {
int port, pin, flags;
};
static struct __initdata cpm_pin tqm8xx_pins[] = {
/* SMC1 */
{CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
{CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
/* SCC1 */
{CPM_PORTA, 5, CPM_PIN_INPUT}, /* CLK1 */
{CPM_PORTA, 7, CPM_PIN_INPUT}, /* CLK2 */
{CPM_PORTA, 14, CPM_PIN_INPUT}, /* TX */
{CPM_PORTA, 15, CPM_PIN_INPUT}, /* RX */
{CPM_PORTC, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */
{CPM_PORTC, 10, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO},
{CPM_PORTC, 11, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO},
};
static struct __initdata cpm_pin tqm8xx_fec_pins[] = {
/* MII */
{CPM_PORTD, 3, CPM_PIN_OUTPUT},
{CPM_PORTD, 4, CPM_PIN_OUTPUT},
{CPM_PORTD, 5, CPM_PIN_OUTPUT},
{CPM_PORTD, 6, CPM_PIN_OUTPUT},
{CPM_PORTD, 7, CPM_PIN_OUTPUT},
{CPM_PORTD, 8, CPM_PIN_OUTPUT},
{CPM_PORTD, 9, CPM_PIN_OUTPUT},
{CPM_PORTD, 10, CPM_PIN_OUTPUT},
{CPM_PORTD, 11, CPM_PIN_OUTPUT},
{CPM_PORTD, 12, CPM_PIN_OUTPUT},
{CPM_PORTD, 13, CPM_PIN_OUTPUT},
{CPM_PORTD, 14, CPM_PIN_OUTPUT},
{CPM_PORTD, 15, CPM_PIN_OUTPUT},
};
static void __init init_pins(int n, struct cpm_pin *pin)
{
int i;
for (i = 0; i < n; i++) {
cpm1_set_pin(pin->port, pin->pin, pin->flags);
pin++;
}
}
static void __init init_ioports(void)
{
struct device_node *dnode;
struct property *prop;
int len;
init_pins(ARRAY_SIZE(tqm8xx_pins), &tqm8xx_pins[0]);
cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
dnode = of_find_node_by_name(NULL, "aliases");
if (dnode == NULL)
return;
prop = of_find_property(dnode, "ethernet1", &len);
if (prop == NULL)
return;
/* init FEC pins */
init_pins(ARRAY_SIZE(tqm8xx_fec_pins), &tqm8xx_fec_pins[0]);
}
static void __init tqm8xx_setup_arch(void)
{
cpm_reset();
init_ioports();
}
static int __init tqm8xx_probe(void)
{
unsigned long node = of_get_flat_dt_root();
return of_flat_dt_is_compatible(node, "tqc,tqm8xx");
}
static struct of_device_id __initdata of_bus_ids[] = {
{ .name = "soc", },
{ .name = "cpm", },
{ .name = "localbus", },
{ .compatible = "simple-bus" },
{},
};
static int __init declare_of_platform_devices(void)
{
of_platform_bus_probe(NULL, of_bus_ids, NULL);
return 0;
}
machine_device_initcall(tqm8xx, declare_of_platform_devices);
define_machine(tqm8xx) {
.name = "TQM8xx",
.probe = tqm8xx_probe,
.setup_arch = tqm8xx_setup_arch,
.init_IRQ = mpc8xx_pics_init,
.get_irq = mpc8xx_get_irq,
.restart = mpc8xx_restart,
.calibrate_decr = mpc8xx_calibrate_decr,
.set_rtc_time = mpc8xx_set_rtc_time,
.get_rtc_time = mpc8xx_get_rtc_time,
.progress = udbg_progress,
};
...@@ -412,6 +412,7 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4080, quirk_fsl_pcie_header); ...@@ -412,6 +412,7 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4080, quirk_fsl_pcie_header);
#endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */ #endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */
#if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x) #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x)
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8308, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314E, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314E, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8315E, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8315E, quirk_fsl_pcie_header);
......
...@@ -2264,6 +2264,7 @@ ...@@ -2264,6 +2264,7 @@
#define PCI_DEVICE_ID_TDI_EHCI 0x0101 #define PCI_DEVICE_ID_TDI_EHCI 0x0101
#define PCI_VENDOR_ID_FREESCALE 0x1957 #define PCI_VENDOR_ID_FREESCALE 0x1957
#define PCI_DEVICE_ID_MPC8308 0xc006
#define PCI_DEVICE_ID_MPC8315E 0x00b4 #define PCI_DEVICE_ID_MPC8315E 0x00b4
#define PCI_DEVICE_ID_MPC8315 0x00b5 #define PCI_DEVICE_ID_MPC8315 0x00b5
#define PCI_DEVICE_ID_MPC8314E 0x00b6 #define PCI_DEVICE_ID_MPC8314E 0x00b6
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment