Merge bk://bk.arm.linux.org.uk/linux-2.6-exp

into home.osdl.org:/home/torvalds/v2.5/linux

arch/arm/boot/compressed/Makefile

@@ -23,10 +23,6 @@ ifeq ($(CONFIG_ARCH_SHARK),y)
 OBJS		+= head-shark.o ofw-shark.o
 endif
 
-ifeq ($(CONFIG_ARCH_INTEGRATOR),y)
-OBJS		+= head-integrator.o
-endif
-
 ifeq ($(CONFIG_ARCH_CAMELOT),y)
 OBJS		+= head-epxa10db.o
 endif

arch/arm/boot/compressed/head-integrator.S

-#include <asm/mach-types.h>
-
-		.section	".start", "ax"
-		mov	r7, #MACH_TYPE_INTEGRATOR

arch/arm/boot/compressed/head.S

@@ -503,12 +503,6 @@ proc_types:
 
 		@ Everything from here on will be the new ID system.
 
-		.word	0x41129200		@ ARM920T
-		.word	0xff00fff0
-		b	__armv4_cache_on
-		b	__armv4_cache_off
-		b	__armv4_cache_flush
-
 		.word	0x4401a100		@ sa110 / sa1100
 		.word	0xffffffe0
 		b	__armv4_cache_on
@@ -523,6 +517,12 @@ proc_types:
 
 		@ These match on the architecture ID
 
+		.word	0x00020000		@ ARMv4T
+		.word	0x000f0000
+		b	__armv4_cache_on
+		b	__armv4_cache_off
+		b	__armv4_cache_flush
+
 		.word	0x00050000		@ ARMv5TE
 		.word	0x000f0000
 		b	__armv4_cache_on

arch/arm/common/sa1111.c

@@ -34,6 +34,8 @@
 
 #include <asm/hardware/sa1111.h>
 
+extern void __init sa1110_mb_enable(void);
+
 /*
  * We keep the following data for the overall SA1111.  Note that the
  * struct device and struct resource are "fake"; they should be supplied
@@ -561,6 +563,8 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 	dev->res.name    = dev->dev.bus_id;
 	dev->res.flags   = IORESOURCE_MEM;
 	dev->mapbase     = sachip->base + info->offset;
+	dev->skpcr_mask  = info->skpcr_mask;
+	memmove(dev->irq, info->irq, sizeof(dev->irq));
 
 	ret = request_resource(parent, &dev->res);
 	if (ret) {

arch/arm/kernel/armksyms.c

@@ -68,8 +68,8 @@ extern void __umoddi3(void);
 extern void __udivmoddi4(void);
 extern void __udivsi3(void);
 extern void __umodsi3(void);
+extern void __do_div64(void);
 extern void abort(void);
-extern void do_div64(void);
 
 extern void ret_from_exception(void);
 extern void fpundefinstr(void);
@@ -223,7 +223,7 @@ EXPORT_SYMBOL_NOVERS(__umoddi3);
 EXPORT_SYMBOL_NOVERS(__udivmoddi4);
 EXPORT_SYMBOL_NOVERS(__udivsi3);
 EXPORT_SYMBOL_NOVERS(__umodsi3);
-EXPORT_SYMBOL_NOVERS(do_div64);
+EXPORT_SYMBOL_NOVERS(__do_div64);
 
 	/* bitops */
 EXPORT_SYMBOL(_set_bit_le);

arch/arm/kernel/calls.S

@@ -271,6 +271,20 @@ __syscall_start:
 		.long	sys_ni_syscall	/* sys_set_thread_area */
 /* 255 */	.long	sys_ni_syscall	/* sys_get_thread_area */
  		.long	sys_ni_syscall	/* sys_set_tid_address */
+		.long	sys_timer_create
+		.long	sys_timer_settime
+		.long	sys_timer_gettime
+/* 260 */	.long	sys_timer_getoverrun
+		.long	sys_timer_delete
+		.long	sys_clock_settime
+		.long	sys_clock_gettime
+		.long	sys_clock_getres
+/* 265 */	.long	sys_clock_nanosleep
+		.long	sys_statfs64
+		.long	sys_fstatfs64
+		.long	sys_tgkill
+		.long	sys_utimes
+/* 270 */	.long	sys_fadvise64_64
 __syscall_end:
 
 		.rept	NR_syscalls - (__syscall_end - __syscall_start) / 4

arch/arm/lib/div64.S

+/*
+ *  linux/arch/arm/lib/div64.S
+ *
+ *  Optimized computation of 64-bit dividend / 32-bit divisor
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Oct 5, 2003
+ *  Copyright:	Monta Vista Software, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
 #include <linux/linkage.h>
 
-#ifndef __ARMEB__
-ql	.req	r0			@ quotient low
-qh	.req	r1			@ quotient high
-onl	.req	r0			@ original dividend low
-onh	.req	r1			@ original dividend high
-nl	.req	r4			@ dividend low
-nh	.req	r5			@ dividend high
-res	.req	r4			@ result
+#ifdef __ARMEB__
+#define xh r0
+#define xl r1
+#define yh r2
+#define yl r3
 #else
-ql	.req	r1
-qh	.req	r0
-onl	.req	r1
-onh	.req	r0
-nl	.req	r5
-nh	.req	r4
-res	.req	r5
+#define xl r0
+#define xh r1
+#define yl r2
+#define yh r3
 #endif
 
-dl	.req	r3			@ divisor low
-dh	.req	r2			@ divsor high
-
-
-ENTRY(do_div64)
-	stmfd	sp!, {r4, r5, lr}
-	mov	nl, onl
-	movs	nh, onh			@ if high bits are zero
-	movne	lr, #33
-	moveq	lr, #1			@ only divide low bits
-	moveq	nh, onl
-
-	tst	dh, #0x80000000
-	bne	2f
-1:	cmp	nh, dh
-	bls	2f
-	add	lr, lr, #1
-	movs	dh, dh, lsl #1		@ left justify disor
-	bpl	1b
-
-2:	movs	nh, onh
-	moveq	dl, dh
-	moveq	dh, #0
-	movne	dl, #0
-	mov	ql, #0
-	mov	qh, #0
-3:	subs	ip, nl, dl		@ trial subtraction
-	sbcs	ip, nh, dh
-	movcs	nh, ip			@ only update if successful
-	subcs	nl, nl, dl		@ (repeat the subtraction)
-	adcs	ql, ql, ql		@ C=1 if successful, shift into
-	adc	qh, qh, qh		@ quotient
-	movs	dh, dh, lsr #1		@ shift base high part right
-	mov	dl, dl, rrx		@ shift base low part right
-	subs	lr, lr, #1
-	bne	3b
-
-	mov	r2, res
-	ldmfd	sp!, {r4, r5, pc}
+/*
+ * __do_div64: perform a division with 64-bit dividend and 32-bit divisor.
+ *
+ * Note: Calling convention is totally non standard for optimal code.
+ *       This is meant to be used by do_div() from include/asm/div64.h only.
+ *
+ * Input parameters:
+ * 	xh-xl	= dividend (clobbered)
+ * 	r4	= divisor (preserved)
+ *
+ * Output values:
+ * 	yh-yl	= result
+ * 	xh	= remainder
+ *
+ * Clobbered regs: xl, ip
+ */
+
+ENTRY(__do_div64)
+
+	@ Test for easy paths first.
+	subs	ip, r4, #1
+	bls	9f			@ divisor is 0 or 1
+	tst	ip, r4
+	beq	8f			@ divisor is power of 2
+
+	@ See if we need to handle upper 32-bit result.
+	cmp	xh, r4
+	mov	yh, #0
+	blo	3f
+
+	@ Align divisor with upper part of dividend.
+	@ The aligned divisor is stored in yl preserving the original.
+	@ The bit position is stored in ip.
+
+#if __LINUX_ARM_ARCH__ >= 5
+
+	clz	yl, r4
+	clz	ip, xh
+	sub	yl, yl, ip
+	mov	ip, #1
+	mov	ip, ip, lsl yl
+	mov	yl, r4, lsl yl
+
+#else
+
+	mov	yl, r4
+	mov	ip, #1
+1:	cmp	yl, #0x80000000
+	cmpcc	yl, xh
+	movcc	yl, yl, lsl #1
+	movcc	ip, ip, lsl #1
+	bcc	1b
+
+#endif
+
+	@ The division loop for needed upper bit positions.
+ 	@ Break out early if dividend reaches 0.
+2:	cmp	xh, yl
+	orrcs	yh, yh, ip
+	subcss	xh, xh, yl
+	movnes	ip, ip, lsr #1
+	mov	yl, yl, lsr #1
+	bne	2b
+
+	@ See if we need to handle lower 32-bit result.
+3:	cmp	xh, #0
+	mov	yl, #0
+	cmpeq	xl, r4
+	movlo	xh, xl
+	movlo	pc, lr
+
+	@ The division loop for lower bit positions.
+	@ Here we shift remainer bits leftwards rather than moving the
+	@ divisor for comparisons, considering the carry-out bit as well.
+	mov	ip, #0x80000000
+4:	movs	xl, xl, lsl #1
+	adcs	xh, xh, xh
+	beq	6f
+	cmpcc	xh, r4
+5:	orrcs	yl, yl, ip
+	subcs	xh, xh, r4
+	movs	ip, ip, lsr #1
+	bne	4b
+	mov	pc, lr
+
+	@ The top part of remainder became zero.  If carry is set
+	@ (the 33th bit) this is a false positive so resume the loop.
+	@ Otherwise, if lower part is also null then we are done.
+6:	bcs	5b
+	cmp	xl, #0
+	moveq	pc, lr
+
+	@ We still have remainer bits in the low part.  Bring them up.
+
+#if __LINUX_ARM_ARCH__ >= 5
+
+	clz	xh, xl			@ we know xh is zero here so...
+	add	xh, xh, #1
+	mov	xl, xl, lsl xh
+	mov	ip, ip, lsr xh
+
+#else
+
+7:	movs	xl, xl, lsl #1
+	mov	ip, ip, lsr #1
+	bcc	7b
+
+#endif
+
+	@ Current remainder is now 1.  It is worthless to compare with
+	@ divisor at this point since divisor can not be smaller than 3 here.
+	@ If possible, branch for another shift in the division loop.
+	@ If no bit position left then we are done.
+	movs	ip, ip, lsr #1
+	mov	xh, #1
+	bne	4b
+	mov	pc, lr
+
+8:	@ Division by a power of 2: determine what that divisor order is
+	@ then simply shift values around
+
+#if __LINUX_ARM_ARCH__ >= 5
+
+	clz	ip, r4
+	rsb	ip, ip, #31
+
+#else
+
+	mov	yl, r4
+	cmp	r4, #(1 << 16)
+	mov	ip, #0
+	movhs	yl, yl, lsr #16
+	movhs	ip, #16
+
+	cmp	yl, #(1 << 8)
+	movhs	yl, yl, lsr #8
+	addhs	ip, ip, #8
+
+	cmp	yl, #(1 << 4)
+	movhs	yl, yl, lsr #4
+	addhs	ip, ip, #4
+
+	cmp	yl, #(1 << 2)
+	addhi	ip, ip, #3
+	addls	ip, ip, yl, lsr #1
+
+#endif
+
+	mov	yh, xh, lsr ip
+	mov	yl, xl, lsr ip
+	rsb	ip, ip, #32
+	orr	yl, yl, xh, lsl ip
+	mov	xh, xl, lsl ip
+	mov	xh, xh, lsr ip
+	mov	pc, lr
+
+	@ eq -> division by 1: obvious enough...
+9:	moveq	yl, xl
+	moveq	yh, xh
+	moveq	xh, #0
+	moveq	pc, lr
+
+	@ Division by 0:
+	str	lr, [sp, #-4]!
+	bl	__div0
+
+	@ as wrong as it could be...
+	mov	yl, #0
+	mov	yh, #0
+	mov	xh, #0
+	ldr	pc, [sp], #4
+

arch/arm/mach-clps711x/time.c

@@ -40,6 +40,7 @@ static unsigned long clps711x_gettimeoffset(void)
 
 void __init clps711x_setup_timer(void)
 {
+	struct timespec tv;
 	unsigned int syscon;
 
 	gettimeoffset = clps711x_gettimeoffset;
@@ -50,5 +51,7 @@ void __init clps711x_setup_timer(void)
 
 	clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */
 
-	xtime.tv_sec = clps_readl(RTCDR);
+	tv.tv_nsec = 0;
+	tv.tv_sec = clps_readl(RTCDR);
+	do_settimeofday(&tv);
 }

arch/arm/mach-integrator/integrator_ap.c

@@ -126,7 +126,7 @@ static void __init ap_init_irq(void)
 	writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
 
 	for (i = 0; i < NR_IRQS; i++) {
-		if (((1 << i) && INTEGRATOR_SC_VALID_INT) != 0) {
+		if (((1 << i) & INTEGRATOR_SC_VALID_INT) != 0) {
 			set_irq_chip(i, &sc_chip);
 			set_irq_handler(i, do_level_IRQ);
 			set_irq_flags(i, IRQF_VALID | IRQF_PROBE);

arch/arm/mm/cache-v3.S

@@ -32,14 +32,14 @@ ENTRY(v3_flush_kern_cache_all)
 	/* FALLTHROUGH */
 
 /*
- *	flush_user_cache_range(start, end, vm_flags)
+ *	flush_user_cache_range(start, end, flags)
  *
  *	Invalidate a range of cache entries in the specified
  *	address space.
  *
  *	- start - start address (may not be aligned)
  *	- end	- end address (exclusive, may not be aligned)
- *	- vma	- vma_area_struct describing address space
+ *	- flags	- vma_area_struct flags describing address space
  */
 ENTRY(v3_flush_user_cache_range)
 	mov	ip, #0

arch/arm/mm/cache-v4.S

@@ -34,14 +34,14 @@ ENTRY(v4_flush_kern_cache_all)
 	mov	pc, lr
 
 /*
- *	flush_user_cache_range(start, end, vma)
+ *	flush_user_cache_range(start, end, flags)
  *
  *	Invalidate a range of cache entries in the specified
  *	address space.
  *
  *	- start - start address (may not be aligned)
  *	- end	- end address (exclusive, may not be aligned)
- *	- vma	- vma_area_struct describing address space
+ *	- flags	- vma_area_struct flags describing address space
  */
 ENTRY(v4_flush_user_cache_range)
 	mov	ip, #0

arch/arm/mm/cache-v4wb.S

@@ -72,14 +72,14 @@ __flush_whole_cache:
 	mov	pc, lr
 
 /*
- *	flush_user_cache_range(start, end, vm_flags)
+ *	flush_user_cache_range(start, end, flags)
  *
  *	Invalidate a range of cache entries in the specified
  *	address space.
  *
  *	- start - start address (inclusive, page aligned)
  *	- end	- end address (exclusive, page aligned)
- *	- vma	- vma_area_struct describing address space
+ *	- flags	- vma_area_struct flags describing address space
  */
 ENTRY(v4wb_flush_user_cache_range)
 	sub	r3, r1, r0			@ calculate total size

arch/arm/mm/cache-v4wt.S

@@ -64,14 +64,14 @@ __flush_whole_cache:
 	mov	pc, lr
 
 /*
- *	flush_user_cache_range(start, end, vm_flags)
+ *	flush_user_cache_range(start, end, flags)
  *
  *	Clean and invalidate a range of cache entries in the specified
  *	address space.
  *
  *	- start - start address (inclusive, page aligned)
  *	- end	- end address (exclusive, page aligned)
- *	- vma	- vma_area_struct describing address space
+ *	- flags	- vma_area_struct flags describing address space
  */
 ENTRY(v4wt_flush_user_cache_range)
 	sub	r3, r1, r0			@ calculate total size

drivers/acorn/char/i2c.c

@@ -280,13 +280,15 @@ static int ioc_client_reg(struct i2c_client *client)
 	    client->addr == 0x50) {
 		struct rtc_tm rtctm;
 		unsigned int year;
+		struct timespec tv;
 
 		rtc_client = client;
 		get_rtc_time(&rtctm, &year);
 
-		xtime.tv_nsec = rtctm.cs * 10000000;
-		xtime.tv_sec  = mktime(year, rtctm.mon, rtctm.mday,
+		tv.tv_nsec = rtctm.cs * 10000000;
+		tv.tv_sec  = mktime(year, rtctm.mon, rtctm.mday,
 				    rtctm.hours, rtctm.mins, rtctm.secs);
+		do_settimeofday(&tv);
 		set_rtc = k_set_rtc_time;
 	}
 

include/asm-arm/arch-ebsa285/time.h

@@ -243,6 +243,7 @@ void __init time_init(void)
 
 		if ((CMOS_READ(RTC_REG_A) & 0x7f) == RTC_REF_CLCK_32KHZ &&
 		    CMOS_READ(RTC_REG_B) == reg_b) {
+			struct timespec tv;
 
 			/*
 			 * We have a RTC.  Check the battery
@@ -250,7 +251,9 @@ void __init time_init(void)
 			if ((reg_d & 0x80) == 0)
 				printk(KERN_WARNING "RTC: *** warning: CMOS battery bad\n");
 
-			xtime.tv_sec = get_isa_cmos_time();
+			tv.tv_nsec = 0;
+			tv.tv_sec = get_isa_cmos_time();
+			do_settimeofday(&tv);
 			set_rtc = set_isa_cmos_time;
 		} else
 			rtc_base = 0;

include/asm-arm/arch-pxa/time.h

@@ -33,7 +33,7 @@ static int pxa_set_rtc(void)
 /* IRQs are disabled before entering here from do_gettimeofday() */
 static unsigned long pxa_gettimeoffset (void)
 {
-	unsigned long ticks_to_match, elapsed, usec;
+	long ticks_to_match, elapsed, usec;
 
 	/* Get ticks before next timer match */
 	ticks_to_match = OSMR0 - OSCR;
@@ -41,6 +41,10 @@ static unsigned long pxa_gettimeoffset (void)
 	/* We need elapsed ticks since last match */
 	elapsed = LATCH - ticks_to_match;
 
+	/* don't get fooled by the workaround in pxa_timer_interrupt() */
+	if (elapsed <= 0)
+		return 0;
+
 	/* Now convert them to usec */
 	usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH;
 
@@ -59,6 +63,15 @@ pxa_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	 * IRQs are disabled inside the loop to ensure coherence between
 	 * lost_ticks (updated in do_timer()) and the match reg value, so we
 	 * can use do_gettimeofday() from interrupt handlers.
+	 *
+	 * HACK ALERT: it seems that the PXA timer regs aren't updated right
+	 * away in all cases when a write occurs.  We therefore compare with
+	 * 8 instead of 0 in the while() condition below to avoid missing a
+	 * match if OSCR has already reached the next OSMR value.
+	 * Experience has shown that up to 6 ticks are needed to work around
+	 * this problem, but let's use 8 to be conservative.  Note that this
+	 * affect things only when the timer IRQ has been delayed by nearly
+	 * exactly one tick period which should be a pretty rare event.
 	 */
 	do {
 		do_leds();
@@ -66,16 +79,22 @@ pxa_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 		do_timer(regs);
 		OSSR = OSSR_M0;  /* Clear match on timer 0 */
 		next_match = (OSMR0 += LATCH);
-	} while( (signed long)(next_match - OSCR) <= 0 );
+	} while( (signed long)(next_match - OSCR) <= 8 );
 
 	return IRQ_HANDLED;
 }
 
 void __init time_init(void)
 {
+	struct timespec tv;
+
 	gettimeoffset = pxa_gettimeoffset;
 	set_rtc = pxa_set_rtc;
-	xtime.tv_sec = pxa_get_rtc_time();
+
+	tv.tv_nsec = 0;
+	tv.tv_sec = pxa_get_rtc_time();
+	do_settimeofday(&tv);
+
 	timer_irq.handler = pxa_timer_interrupt;
 	OSMR0 = 0;		/* set initial match at 0 */
 	OSSR = 0xf;		/* clear status on all timers */

include/asm-arm/arch-sa1100/time.h

@@ -92,9 +92,15 @@ sa1100_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 
 void __init time_init(void)
 {
+	struct timespec tv;
+
 	gettimeoffset = sa1100_gettimeoffset;
 	set_rtc = sa1100_set_rtc;
-	xtime.tv_sec = sa1100_get_rtc_time();
+
+	tv.tv_nsec = 0;
+	tv.tv_sec = sa1100_get_rtc_time();
+	do_settimeofday(&tv);
+
 	timer_irq.handler = sa1100_timer_interrupt;
 	OSMR0 = 0;		/* set initial match at 0 */
 	OSSR = 0xf;		/* clear status on all timers */

include/asm-arm/arch-shark/time.h

@@ -34,8 +34,6 @@ void __init time_init(void)
 	outb(HZ_TIME & 0xff, 0x40);     /* LSB of count */
 	outb(HZ_TIME >> 8, 0x40);
 
-	xtime.tv_sec = 0;
-
 	timer_irq.handler = timer_interrupt;
 	setup_irq(IRQ_TIMER, &timer_irq);
 }

include/asm-arm/div64.h

 #ifndef __ASM_ARM_DIV64
 #define __ASM_ARM_DIV64
 
-/* We're not 64-bit, but... */
+/*
+ * The semantics of do_div() are:
+ *
+ * uint32_t do_div(uint64_t *n, uint32_t base)
+ * {
+ * 	uint32_t remainder = *n % base;
+ * 	*n = *n / base;
+ * 	return remainder;
+ * }
+ *
+ * In other words, a 64-bit dividend with a 32-bit divisor producing
+ * a 64-bit result and a 32-bit remainder.  To accomplish this optimally
+ * we call a special __do_div64 helper with completely non standard
+ * calling convention for arguments and results (beware).
+ */
+
+#ifdef __ARMEB__
+#define __xh "r0"
+#define __xl "r1"
+#else
+#define __xl "r0"
+#define __xh "r1"
+#endif
+
 #define do_div(n,base)						\
 ({								\
-	register int __res asm("r2") = base;			\
+	register unsigned int __base      asm("r4") = base;	\
 	register unsigned long long __n   asm("r0") = n;	\
-	asm("bl do_div64"					\
-		: "=r" (__n), "=r" (__res)			\
-		: "0" (__n), "1" (__res)			\
-		: "r3", "ip", "lr", "cc");			\
-	n = __n;						\
-	__res;							\
+	register unsigned long long __res asm("r2");		\
+	register unsigned int __rem       asm(__xh);		\
+	asm("bl	__do_div64"					\
+		: "=r" (__rem), "=r" (__res)			\
+		: "r" (__n), "r" (__base)			\
+		: "ip", "lr", "cc");				\
+	n = __res;						\
+	__rem;							\
 })
 
 #endif
-

include/asm-arm/kmap_types.h

@@ -5,8 +5,21 @@
  * This is the "bare minimum".  AIO seems to require this.
  */
 enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_PTE2,
 	KM_IRQ0,
-	KM_USER1
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_TYPE_NR
 };
 
 #endif

include/asm-arm/unaligned.h

@@ -159,7 +159,7 @@ static inline void __put_unaligned_8_be(const unsigned long long __v, register _
 		(void) 0;					\
 	})
 
-#define put_unaligned_be(val,ptr)					\
+#define __put_unaligned_be(val,ptr)					\
 	({							\
 		switch (sizeof(*(ptr))) {			\
 		case 1:						\

include/asm-arm/unistd.h

@@ -282,6 +282,20 @@
 					/* 254 for set_thread_area */
 					/* 255 for get_thread_area */
 					/* 256 for set_tid_address */
+#define __NR_timer_create		(__NR_SYSCALL_BASE+257)
+#define __NR_timer_settime		(__NR_SYSCALL_BASE+258)
+#define __NR_timer_gettime		(__NR_SYSCALL_BASE+259)
+#define __NR_timer_getoverrun		(__NR_SYSCALL_BASE+260)
+#define __NR_timer_delete		(__NR_SYSCALL_BASE+261)
+#define __NR_clock_settime		(__NR_SYSCALL_BASE+262)
+#define __NR_clock_gettime		(__NR_SYSCALL_BASE+263)
+#define __NR_clock_getres		(__NR_SYSCALL_BASE+264)
+#define __NR_clock_nanosleep		(__NR_SYSCALL_BASE+265)
+#define __NR_statfs64			(__NR_SYSCALL_BASE+266)
+#define __NR_fstatfs64			(__NR_SYSCALL_BASE+267)
+#define __NR_tgkill			(__NR_SYSCALL_BASE+268)
+#define __NR_utimes			(__NR_SYSCALL_BASE+269)
+#define __NR_fadvise64_64		(__NR_SYSCALL_BASE+270)
 
 /*
  * The following SWIs are ARM private.

sound/oss/vidc.c

@@ -41,6 +41,7 @@
 #endif
 
 #define VIDC_SOUND_CLOCK	(250000)
+#define VIDC_SOUND_CLOCK_EXT	(176400)
 
 /*
  * When using SERIAL SOUND mode (external DAC), the number of physical
@@ -81,17 +82,9 @@ static unsigned char	vidc_level_r[SOUND_MIXER_NRDEVICES] = {
 static unsigned int	vidc_audio_volume_l;	/* left PCM vol, 0 - 65536 */
 static unsigned int	vidc_audio_volume_r;	/* right PCM vol, 0 - 65536 */
 
-static void	(*old_mksound)(unsigned int hz, unsigned int ticks);
-extern void	(*kd_mksound)(unsigned int hz, unsigned int ticks);
 extern void	vidc_update_filler(int bits, int channels);
 extern int	softoss_dev;
 
-static void
-vidc_mksound(unsigned int hz, unsigned int ticks)
-{
-//	printk("BEEP - %d %d!\n", hz, ticks);
-}
-
 static void
 vidc_mixer_set(int mdev, unsigned int level)
 {
@@ -193,28 +186,50 @@ static unsigned int vidc_audio_set_format(int dev, unsigned int fmt)
 	return vidc_audio_format;
 }
 
+#define my_abs(i) ((i)<0 ? -(i) : (i))
+
 static int vidc_audio_set_speed(int dev, int rate)
 {
 	if (rate) {
-		unsigned int hwctrl, hwrate;
+		unsigned int hwctrl, hwrate, hwrate_ext, rate_int, rate_ext;
+		unsigned int diff_int, diff_ext;
 		unsigned int newsize, new2size;
 
-		/*
-		 * If we have selected 44.1kHz, use the DAC clock.
-		 */
-		if (0 && rate == 44100) {
-			hwctrl = 0x00000002;
-			hwrate = 3;
-		} else {
 		hwctrl = 0x00000003;
 
+		/* Using internal clock */
 		hwrate = (((VIDC_SOUND_CLOCK * 2) / rate) + 1) >> 1;
 		if (hwrate < 3)
 			hwrate = 3;
 		if (hwrate > 255)
 			hwrate = 255;
 
-			rate = VIDC_SOUND_CLOCK / hwrate;
+		/* Using exernal clock */
+		hwrate_ext = (((VIDC_SOUND_CLOCK_EXT * 2) / rate) + 1) >> 1;
+		if (hwrate_ext < 3)
+			hwrate_ext = 3;
+		if (hwrate_ext > 255)
+			hwrate_ext = 255;
+
+		rate_int = VIDC_SOUND_CLOCK / hwrate;
+		rate_ext = VIDC_SOUND_CLOCK_EXT / hwrate_ext;
+
+		/* Chose between external and internal clock */
+		diff_int = my_abs(rate_ext-rate);
+		diff_ext = my_abs(rate_int-rate);
+		if (diff_ext < diff_int) {
+			/*printk("VIDC: external %d %d %d\n", rate, rate_ext, hwrate_ext);*/
+			hwrate=hwrate_ext;
+			hwctrl=0x00000002;
+			/* Allow roughly 0.4% tolerance */
+			if (diff_ext > (rate/256))
+				rate=rate_ext;
+		} else {
+			/*printk("VIDC: internal %d %d %d\n", rate, rate_int, hwrate);*/
+			hwctrl=0x00000003;
+			/* Allow rougly 0.4% tolerance */
+			if (diff_int > (rate/256))
+				rate=rate_int;
 		}
 
 		vidc_writel(0xb0000000 | (hwrate - 2));
@@ -233,6 +248,7 @@ static int vidc_audio_set_speed(int dev, int rate)
 				newsize, new2size);
 			new2size = 4096;
 		}
+		/*printk("VIDC: dma size %d\n", new2size);*/
 		dma_bufsize = new2size;
 		vidc_audio_rate = rate;
 	}
@@ -471,8 +487,6 @@ static void __init attach_vidc(struct address_info *hw_config)
 		printk(KERN_ERR "%s: IRQ %d is in use\n", name, hw_config->irq);
 		goto irq_failed;
 	}
-	old_mksound = kd_mksound;
-	kd_mksound = vidc_mksound;
 	vidc_adev = adev;
 	vidc_mixer_set(SOUND_MIXER_VOLUME, (85 | 85 << 8));
 
@@ -510,9 +524,6 @@ static void __exit unload_vidc(struct address_info *hw_config)
 
 	vidc_adev = -1;
 
-	if (old_mksound)
-		kd_mksound = old_mksound;
-
 	free_irq(hw_config->irq, &dma_start);
 	sound_free_dma(hw_config->dma);