mxc: changes to common plat-mxc code to add support for i.MX5

Prepare for i.MX5 SoC code by adding the relevant macros to common plat-mxc
code.
Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>

arch/arm/plat-mxc/include/mach/debug-macro.S

@@ -45,6 +45,15 @@
 #define UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
 #endif
 
+#ifdef CONFIG_ARCH_MX5
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
+#endif
+#include <mach/mx51.h>
+#define UART_PADDR	MX51_UART1_BASE_ADDR
+#define UART_VADDR	MX51_AIPS1_IO_ADDRESS(MX51_UART1_BASE_ADDR)
+#endif
+
 #ifdef CONFIG_ARCH_MXC91231
 #ifdef UART_PADDR
 #error "CONFIG_DEBUG_LL is incompatible with multiple archs"

arch/arm/plat-mxc/include/mach/hardware.h

@@ -27,6 +27,10 @@
 	 (((unsigned long)((addr) - (module ## _BASE_ADDR)) < module ## _SIZE) ?\
 	 (addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0))
 
+#ifdef CONFIG_ARCH_MX5
+#include <mach/mx51.h>
+#endif
+
 #ifdef CONFIG_ARCH_MX3
 #include <mach/mx3x.h>
 #include <mach/mx31.h>

arch/arm/plat-mxc/include/mach/irqs.h

@@ -30,6 +30,8 @@
 #define MXC_GPIO_IRQS		(32 * 3)
 #elif defined CONFIG_ARCH_MX25
 #define MXC_GPIO_IRQS		(32 * 4)
+#elif defined CONFIG_ARCH_MX5
+#define MXC_GPIO_IRQS		(32 * 4)
 #elif defined CONFIG_ARCH_MXC91231
 #define MXC_GPIO_IRQS		(32 * 4)
 #endif
@@ -55,6 +57,7 @@
 #else
 #define MX3_IPU_IRQS 0
 #endif
+/* REVISIT: Add IPU irqs on IMX51 */
 
 #define NR_IRQS			(MXC_IPU_IRQ_START + MX3_IPU_IRQS)
 

arch/arm/plat-mxc/include/mach/memory.h

@@ -16,6 +16,7 @@
 #define MX25_PHYS_OFFSET	UL(0x80000000)
 #define MX27_PHYS_OFFSET	UL(0xa0000000)
 #define MX3x_PHYS_OFFSET	UL(0x80000000)
+#define MX51_PHYS_OFFSET	UL(0x90000000)
 #define MXC91231_PHYS_OFFSET	UL(0x90000000)
 
 #if !defined(CONFIG_RUNTIME_PHYS_OFFSET)
@@ -31,6 +32,8 @@
 #  define PHYS_OFFSET		MX3x_PHYS_OFFSET
 # elif defined CONFIG_ARCH_MXC91231
 #  define PHYS_OFFSET		MXC91231_PHYS_OFFSET
+# elif defined CONFIG_ARCH_MX5
+#  define PHYS_OFFSET		MX51_PHYS_OFFSET
 # endif
 #endif
 

arch/arm/plat-mxc/include/mach/mxc.h

@@ -30,6 +30,7 @@
 #define MXC_CPU_MX27		27
 #define MXC_CPU_MX31		31
 #define MXC_CPU_MX35		35
+#define MXC_CPU_MX51		51
 #define MXC_CPU_MXC91231	91231
 
 #ifndef __ASSEMBLY__
@@ -108,6 +109,18 @@ extern unsigned int __mxc_cpu_type;
 # define cpu_is_mx35()		(0)
 #endif
 
+#ifdef CONFIG_ARCH_MX5
+# ifdef mxc_cpu_type
+#  undef mxc_cpu_type
+#  define mxc_cpu_type __mxc_cpu_type
+# else
+#  define mxc_cpu_type MXC_CPU_MX51
+# endif
+# define cpu_is_mx51()		(mxc_cpu_type == MXC_CPU_MX51)
+#else
+# define cpu_is_mx51()		(0)
+#endif
+
 #ifdef CONFIG_ARCH_MXC91231
 # ifdef mxc_cpu_type
 #  undef mxc_cpu_type

arch/arm/plat-mxc/include/mach/timex.h

@@ -28,6 +28,8 @@
 #define CLOCK_TICK_RATE		16625000
 #elif defined CONFIG_ARCH_MX25
 #define CLOCK_TICK_RATE		16000000
+#elif defined CONFIG_ARCH_MX5
+#define CLOCK_TICK_RATE		8000000
 #elif defined CONFIG_ARCH_MXC91231
 #define CLOCK_TICK_RATE		13000000
 #endif