Merge bk://kernel.bkbits.net/gregkh/linux/linus-2.6

into home.osdl.org:/home/torvalds/v2.5/linux

drivers/usb/core/usb.c

@@ -217,33 +217,35 @@ struct usb_interface *usb_ifnum_to_if(struct usb_device *dev, unsigned ifnum)
 
 /**
  * usb_epnum_to_ep_desc - get the endpoint object with a given endpoint number
- * @dev: the device whose current configuration is considered
- * @epnum: the desired endpoint
+ * @dev: the device whose current configuration+altsettings is considered
+ * @epnum: the desired endpoint, masked with USB_DIR_IN as appropriate.
  *
  * This walks the device descriptor for the currently active configuration,
  * and returns a pointer to the endpoint with that particular endpoint
  * number, or null.
  *
- * Note that interface descriptors are not required to assign endpont
- * numbers sequentially, so that it would be incorrect to assume that
- * the first endpoint in that descriptor corresponds to interface zero.
+ * Note that interface descriptors are not required to list endpoint
+ * numbers in any standardized order, so that it would be wrong to
+ * assume that ep2in precedes either ep5in, ep2out, or even ep1out.
  * This routine helps device drivers avoid such mistakes.
  */
 struct usb_endpoint_descriptor *
 usb_epnum_to_ep_desc(struct usb_device *dev, unsigned epnum)
 {
-	int i, j, k;
+	int i, k;
 
-	for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++)
-		for (j = 0; j < dev->actconfig->interface[i]->num_altsetting; j++)
-			for (k = 0; k < dev->actconfig->interface[i]->
-				altsetting[j].desc.bNumEndpoints; k++)
-				if (epnum == dev->actconfig->interface[i]->
-						altsetting[j].endpoint[k]
-						.desc.bEndpointAddress)
-					return &dev->actconfig->interface[i]->
-						altsetting[j].endpoint[k]
-						.desc;
+	for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) {
+		struct usb_interface		*intf;
+		struct usb_host_interface	*alt;
+
+		/* only endpoints in current altseting are active */
+		intf = dev->actconfig->interface[i];
+		alt = intf->altsetting + intf->act_altsetting;
+
+		for (k = 0; k < alt->desc.bNumEndpoints; k++)
+			if (epnum == alt->endpoint[k].desc.bEndpointAddress)
+				return &alt->endpoint[k].desc;
+	}
 
 	return NULL;
 }

drivers/usb/gadget/Kconfig

@@ -147,6 +147,30 @@ config USB_ETH_SA1100
 	depends on USB_ETH && USB_SA1100
 	default y
 
+config USB_GADGETFS
+	tristate "Gadget Filesystem (EXPERIMENTAL)"
+	depends on USB_GADGET && (USB_DUMMY_HCD || USB_NET2280 || USB_PXA2XX) && EXPERIMENTAL
+	help
+	  This driver provides a filesystem based API that lets user mode
+	  programs implement a single-configuration USB device, including
+	  endpoint I/O and control requests that don't relate to enumeration.
+	  All endpoints, transfer speeds, and transfer types supported by
+	  the hardware are available, through read() and write() calls.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "gadgetfs".
+
+config USB_GADGETFS_NET2280
+	bool
+	# for now, treat the "dummy" hcd as if it were a net2280
+	depends on USB_GADGETFS && (USB_NET2280 || USB_DUMMY_HCD)
+	default y
+
+config USB_GADGETFS_PXA2XX
+	bool
+	depends on USB_GADGETFS && USB_PXA2XX
+	default y
+
 endchoice
 
 # endmenuconfig

drivers/usb/gadget/Makefile

@@ -8,7 +8,9 @@ obj-$(CONFIG_USB_NET2280)	+= net2280.o
 #
 g_zero-objs			:= zero.o usbstring.o
 g_ether-objs			:= ether.o usbstring.o
+gadgetfs-objs			:= inode.o usbstring.o
  
 obj-$(CONFIG_USB_ZERO)		+= g_zero.o
 obj-$(CONFIG_USB_ETH)		+= g_ether.o
+obj-$(CONFIG_USB_GADGETFS)	+= gadgetfs.o
 

drivers/usb/gadget/inode.c

+/*
+ * inode.c -- user mode filesystem api for usb gadget controllers
+ *
+ * Copyright (C) 2003 David Brownell
+ * Copyright (C) 2003 Agilent Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+
+#define	DEBUG 1			/* data to help fault diagnosis */
+// #define	VERBOSE		/* extra debug messages (success too) */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/pagemap.h>
+#include <linux/uts.h>
+#include <linux/version.h>
+#include <linux/wait.h>
+#include <linux/compiler.h>
+#include <asm/uaccess.h>
+#include <linux/slab.h>
+
+#include <linux/device.h>
+#include <linux/moduleparam.h>
+
+#include <linux/usb_gadgetfs.h>
+#include <linux/usb_gadget.h>
+
+
+/*
+ * The gadgetfs API maps each endpoint to a file descriptor so that you
+ * can use standard synchronous read/write calls for I/O.  There's some
+ * O_NONBLOCK and O_ASYNC/FASYNC style i/o support.  Example usermode
+ * drivers show how this works in practice.
+ *
+ * Key parts that must be USB-specific are protocols defining how the
+ * read/write operations relate to the hardware state machines.  There
+ * are two types of files.  One type is for the device, implementing ep0.
+ * The other type is for each IN or OUT endpoint.  In both cases, the
+ * user mode driver must configure the hardware before using it.
+ *
+ * - First, dev_config() is called when /dev/gadget/$CHIP is configured
+ *   (by writing configuration and device descriptors).  Afterwards it
+ *   may serve as a source of device events, used to handle all control
+ *   requests other than basic enumeration.
+ *
+ * - Then either immediately, or after a SET_CONFIGURATION control request,
+ *   ep_config() is called when each /dev/gadget/ep* file is configured
+ *   (by writing endpoint descriptors).  Afterwards these files are used
+ *   to write() IN data or to read() OUT data.  To halt the endpoint, a
+ *   "wrong direction" request is issued (like reading an IN endpoint).
+ *
+ * Unlike "usbfs" the only ioctl()s are for things that are rare, and maybe
+ * not possible on all hardware.  For example, precise fault handling with
+ * respect to data left in endpoint fifos after aborted operations; or
+ * selective clearing of endpoint halts, to implement SET_INTERFACE.
+ */
+
+#define	DRIVER_DESC	"USB Gadget filesystem"
+#define	DRIVER_VERSION	"20 Aug 2003"
+
+static const char driver_desc [] = DRIVER_DESC;
+static const char shortname [] = "gadgetfs";
+
+MODULE_DESCRIPTION (DRIVER_DESC);
+MODULE_AUTHOR ("David Brownell");
+MODULE_LICENSE ("GPL");
+
+
+/*----------------------------------------------------------------------*/
+
+#define GADGETFS_MAGIC		0xaee71ee7
+#define DMA_ADDR_INVALID	(~(dma_addr_t)0)
+
+/* /dev/gadget/$CHIP represents ep0 and the whole device */
+enum ep0_state {
+	/* DISBLED is the initial state.
+	 */
+	STATE_DEV_DISABLED = 0,
+
+	/* Only one open() of /dev/gadget/$CHIP; only one file tracks
+	 * ep0/device i/o modes and binding to the controller.  Driver
+	 * must always write descriptors to initialize the device, then
+	 * the device becomes UNCONNECTED until enumeration.
+	 */
+	STATE_OPENED,
+
+	/* From then on, ep0 fd is in either of two basic modes:
+	 * - (UN)CONNECTED: read usb_gadgetfs_event(s) from it
+	 * - SETUP: read/write will transfer control data and succeed;
+	 *   or if "wrong direction", performs protocol stall
+	 */
+	STATE_UNCONNECTED,
+	STATE_CONNECTED,
+	STATE_SETUP,
+
+	/* UNBOUND means the driver closed ep0, so the device won't be
+	 * accessible again (DEV_DISABLED) until all fds are closed.
+	 */
+	STATE_DEV_UNBOUND,
+};
+
+/* enough for the whole queue: most events invalidate others */
+#define	N_EVENT			5
+
+struct dev_data {
+	spinlock_t			lock;
+	atomic_t			count;
+	enum ep0_state			state;
+	struct usb_gadgetfs_event	event [N_EVENT];
+	unsigned			ev_next;
+	struct fasync_struct		*fasync;
+	u8				current_config;
+
+	/* drivers reading ep0 MUST handle control requests (SETUP)
+	 * reported that way; else the host will time out.
+	 */
+	unsigned			usermode_setup : 1,
+					setup_in : 1,
+					setup_can_stall : 1,
+					setup_out_ready : 1,
+					setup_out_error : 1,
+					setup_abort : 1;
+
+	/* the rest is basically write-once */
+	struct usb_config_descriptor	*config, *hs_config;
+	struct usb_device_descriptor	*dev;
+	struct usb_request		*req;
+	struct usb_gadget		*gadget;
+	struct list_head		epfiles;
+	void				*buf;
+	wait_queue_head_t		wait;
+	struct super_block		*sb;
+	struct dentry			*dentry;
+
+	/* except this scratch i/o buffer for ep0 */
+	u8				rbuf [256];
+};
+
+static inline void get_dev (struct dev_data *data)
+{
+	atomic_inc (&data->count);
+}
+
+static void put_dev (struct dev_data *data)
+{
+	if (likely (!atomic_dec_and_test (&data->count)))
+		return;
+	/* needs no more cleanup */
+	BUG_ON (waitqueue_active (&data->wait));
+	kfree (data);
+}
+
+static struct dev_data *dev_new (void)
+{
+	struct dev_data		*dev;
+
+	dev = kmalloc (sizeof *dev, GFP_KERNEL);
+	if (!dev)
+		return 0;
+	memset (dev, 0, sizeof *dev);
+	dev->state = STATE_DEV_DISABLED;
+	atomic_set (&dev->count, 1);
+	spin_lock_init (&dev->lock);
+	INIT_LIST_HEAD (&dev->epfiles);
+	init_waitqueue_head (&dev->wait);
+	return dev;
+}
+
+/*----------------------------------------------------------------------*/
+
+/* other /dev/gadget/$ENDPOINT files represent endpoints */
+enum ep_state {
+	STATE_EP_DISABLED = 0,
+	STATE_EP_READY,
+	STATE_EP_DEFER_ENABLE,
+	STATE_EP_ENABLED,
+	STATE_EP_UNBOUND,
+};
+
+struct ep_data {
+	struct semaphore		lock;
+	enum ep_state			state;
+	atomic_t			count;
+	struct dev_data			*dev;
+	/* must hold dev->lock before accessing ep or req */
+	struct usb_ep			*ep;
+	struct usb_request		*req;
+	ssize_t				status;
+	char				name [16];
+	struct usb_endpoint_descriptor	desc, hs_desc;
+	struct list_head		epfiles;
+	wait_queue_head_t		wait;
+	struct dentry			*dentry;
+	struct inode			*inode;
+};
+
+static inline void get_ep (struct ep_data *data)
+{
+	atomic_inc (&data->count);
+}
+
+static void put_ep (struct ep_data *data)
+{
+	if (likely (!atomic_dec_and_test (&data->count)))
+		return;
+	put_dev (data->dev);
+	/* needs no more cleanup */
+	BUG_ON (!list_empty (&data->epfiles));
+	BUG_ON (waitqueue_active (&data->wait));
+	BUG_ON (down_trylock (&data->lock) != 0);
+	kfree (data);
+}
+
+/*----------------------------------------------------------------------*/
+
+/* most "how to use the hardware" policy choices are in userspace:
+ * mapping endpoint roles the driver needs to the capabilities that
+ * the usb controller exposes.
+ */
+
+#ifdef	CONFIG_USB_GADGETFS_NET2280
+#define CHIP			"net2280"
+#define HIGHSPEED
+#endif
+
+#ifdef	CONFIG_USB_GADGETFS_PXA2XX
+#define CHIP			"pxa2xx_udc"
+/* earlier hardware doesn't have UDCCFR, races set_{config,interface} */
+#warning works best with pxa255 or newer
+#endif
+
+#ifdef	CONFIG_USB_GADGETFS_SA1100
+#define CHIP			"sa1100"
+#endif
+
+/*----------------------------------------------------------------------*/
+
+/* NOTE:  don't use dev_printk calls before binding to the gadget
+ * at the end of ep0 configuration, or after unbind.
+ */
+
+/* too wordy: dev_printk(level , &(d)->gadget->dev , fmt , ## args) */
+#define xprintk(d,level,fmt,args...) \
+	printk(level "%s: " fmt , shortname , ## args)
+
+#ifdef DEBUG
+#define DBG(dev,fmt,args...) \
+	xprintk(dev , KERN_DEBUG , fmt , ## args)
+#else
+#define DBG(dev,fmt,args...) \
+	do { } while (0)
+#endif /* DEBUG */
+
+#ifdef VERBOSE
+#define VDEBUG	DBG
+#else
+#define VDEBUG(dev,fmt,args...) \
+	do { } while (0)
+#endif /* DEBUG */
+
+#define ERROR(dev,fmt,args...) \
+	xprintk(dev , KERN_ERR , fmt , ## args)
+#define WARN(dev,fmt,args...) \
+	xprintk(dev , KERN_WARNING , fmt , ## args)
+#define INFO(dev,fmt,args...) \
+	xprintk(dev , KERN_INFO , fmt , ## args)
+
+
+/*----------------------------------------------------------------------*/
+
+/* SYNCHRONOUS ENDPOINT OPERATIONS (bulk/intr/iso)
+ *
+ * After opening, configure non-control endpoints.  Then use normal
+ * stream read() and write() requests; and maybe ioctl() to get more
+ * precise FIFO status when recovering from cancelation.
+ */
+
+static void epio_complete (struct usb_ep *ep, struct usb_request *req)
+{
+	struct ep_data	*epdata = ep->driver_data;
+
+	if (!req->context)
+		return;
+	if (req->status)
+		epdata->status = req->status;
+	else
+		epdata->status = req->actual;
+	complete ((struct completion *)req->context);
+}
+
+/* tasklock endpoint, returning when it's connected.
+ * still need dev->lock to use epdata->ep.
+ */
+static int
+get_ready_ep (unsigned f_flags, struct ep_data *epdata)
+{
+	int	val;
+
+	if (f_flags & O_NONBLOCK) {
+		if (down_trylock (&epdata->lock) != 0)
+			goto nonblock;
+		if (epdata->state != STATE_EP_ENABLED) {
+			up (&epdata->lock);
+nonblock:
+			val = -EAGAIN;
+		} else
+			val = 0;
+		return val;
+	}
+
+	if ((val = down_interruptible (&epdata->lock)) < 0)
+		return val;
+newstate:
+	switch (epdata->state) {
+	case STATE_EP_ENABLED:
+		break;
+	case STATE_EP_DEFER_ENABLE:
+		DBG (epdata->dev, "%s wait for host\n", epdata->name);
+		if ((val = wait_event_interruptible (epdata->wait, 
+				epdata->state != STATE_EP_DEFER_ENABLE
+				|| epdata->dev->state == STATE_DEV_UNBOUND
+				)) < 0)
+			goto fail;
+		goto newstate;
+	// case STATE_EP_DISABLED:		/* "can't happen" */
+	// case STATE_EP_READY:			/* "can't happen" */
+	default:				/* error! */
+		pr_debug ("%s: ep %p not available, state %d\n",
+				shortname, epdata, epdata->state);
+		// FALLTHROUGH
+	case STATE_EP_UNBOUND:			/* clean disconnect */
+		val = -ENODEV;
+fail:
+		up (&epdata->lock);
+	}
+	return val;
+}
+
+static ssize_t
+ep_io (struct ep_data *epdata, void *buf, unsigned len)
+{
+	DECLARE_COMPLETION (done);
+
+	spin_lock_irq (&epdata->dev->lock);
+	if (likely (epdata->ep != NULL)) {
+		struct usb_request	*req = epdata->req;
+
+		req->context = &done;
+		req->complete = epio_complete;
+		req->buf = buf;
+		req->length = len;
+		epdata->status = usb_ep_queue (epdata->ep, req, GFP_ATOMIC);
+	} else
+		epdata->status = -ENODEV;
+	spin_unlock_irq (&epdata->dev->lock);
+
+	if (epdata->status == 0) {
+		int	value;
+
+		value = wait_event_interruptible (done.wait, done.done);
+		if (value != 0) {
+			spin_lock_irq (&epdata->dev->lock);
+			if (likely (epdata->ep != NULL)) {
+				DBG (epdata->dev, "%s i/o interrupted\n",
+						epdata->name);
+				usb_ep_dequeue (epdata->ep, epdata->req);
+				wait_event (done.wait, done.done);
+				if (epdata->status == 0)
+					epdata->status = value;
+			} else {
+				DBG (epdata->dev, "endpoint gone\n");
+				epdata->status = -ENODEV;
+			}
+			spin_unlock_irq (&epdata->dev->lock);
+		}
+	}
+	return epdata->status;
+}
+
+
+/* handle a synchronous OUT bulk/intr/iso transfer */
+static ssize_t
+ep_read (struct file *fd, char *buf, size_t len, loff_t *ptr)
+{
+	struct ep_data		*data = fd->private_data;
+	void			*kbuf;
+	ssize_t			value;
+
+	if ((value = get_ready_ep (fd->f_flags, data)) < 0)
+		return value;
+
+	/* halt any endpoint by doing a "wrong direction" i/o call */
+	if (data->desc.bEndpointAddress & USB_DIR_IN) {
+		if ((data->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+				== USB_ENDPOINT_XFER_ISOC)
+			return -EINVAL;
+		DBG (data->dev, "%s halt\n", data->name);
+		spin_lock_irq (&data->dev->lock);
+		if (likely (data->ep != NULL))
+			usb_ep_set_halt (data->ep);
+		spin_unlock_irq (&data->dev->lock);
+		up (&data->lock);
+		return -EBADMSG;
+	}
+
+	/* FIXME readahead for O_NONBLOCK and poll(); careful with ZLPs */
+
+	value = -ENOMEM;
+	kbuf = kmalloc (len, SLAB_KERNEL);
+	if (unlikely (!kbuf))
+		goto free1;
+
+	VDEBUG (data->dev, "%s read %d OUT\n", data->name, len);
+	value = ep_io (data, kbuf, len);
+	if (value >= 0 && copy_to_user (buf, kbuf, value))
+		value = -EFAULT;
+free1:
+	up (&data->lock);
+	kfree (kbuf);
+	return value;
+}
+
+/* handle a synchronous IN bulk/intr/iso transfer */
+static ssize_t
+ep_write (struct file *fd, const char *buf, size_t len, loff_t *ptr)
+{
+	struct ep_data		*data = fd->private_data;
+	void			*kbuf;
+	ssize_t			value;
+
+	if ((value = get_ready_ep (fd->f_flags, data)) < 0)
+		return value;
+
+	/* halt any endpoint by doing a "wrong direction" i/o call */
+	if (!(data->desc.bEndpointAddress & USB_DIR_IN)) {
+		if ((data->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+				== USB_ENDPOINT_XFER_ISOC)
+			return -EINVAL;
+		DBG (data->dev, "%s halt\n", data->name);
+		spin_lock_irq (&data->dev->lock);
+		if (likely (data->ep != NULL))
+			usb_ep_set_halt (data->ep);
+		spin_unlock_irq (&data->dev->lock);
+		up (&data->lock);
+		return -EBADMSG;
+	}
+
+	/* FIXME writebehind for O_NONBLOCK and poll(), qlen = 1 */
+
+	value = -ENOMEM;
+	kbuf = kmalloc (len, SLAB_KERNEL);
+	if (!kbuf)
+		goto free1;
+	if (copy_from_user (kbuf, buf, len)) {
+		value = -EFAULT;
+		goto free1;
+	}
+
+	VDEBUG (data->dev, "%s write %d IN\n", data->name, len);
+	value = ep_io (data, kbuf, len);
+free1:
+	up (&data->lock);
+	kfree (kbuf);
+	return value;
+}
+
+static int
+ep_release (struct inode *inode, struct file *fd)
+{
+	struct ep_data		*data = fd->private_data;
+
+	/* clean up if this can be reopened */
+	if (data->state != STATE_EP_UNBOUND) {
+		data->state = STATE_EP_DISABLED;
+		data->desc.bDescriptorType = 0;
+		data->hs_desc.bDescriptorType = 0;
+	}
+	put_ep (data);
+	return 0;
+}
+
+static int ep_ioctl (struct inode *inode, struct file *fd,
+		unsigned code, unsigned long value)
+{
+	struct ep_data		*data = fd->private_data;
+	int			status;
+
+	if ((status = get_ready_ep (fd->f_flags, data)) < 0)
+		return status;
+
+	spin_lock_irq (&data->dev->lock);
+	if (likely (data->ep != NULL)) {
+		switch (code) {
+		case GADGETFS_FIFO_STATUS:
+			status = usb_ep_fifo_status (data->ep);
+			break;
+		case GADGETFS_FIFO_FLUSH:
+			usb_ep_fifo_flush (data->ep);
+			break;
+		case GADGETFS_CLEAR_HALT:
+			status = usb_ep_clear_halt (data->ep);
+			break;
+		default:
+			status = -ENOTTY;
+		}
+	} else
+		status = -ENODEV;
+	spin_unlock_irq (&data->dev->lock);
+	up (&data->lock);
+	return status;
+}
+
+/* used after endpoint configuration */
+static struct file_operations ep_io_operations = {
+	.owner =	THIS_MODULE,
+	.read =		ep_read,
+	.write =	ep_write,
+	.ioctl =	ep_ioctl,
+	.release =	ep_release,
+
+	// .aio_read =	ep_aio_read,
+	// .aio_write =	ep_aio_write,
+};
+
+/* ENDPOINT INITIALIZATION
+ *
+ *     fd = open ("/dev/gadget/$ENDPOINT", O_RDWR)
+ *     status = write (fd, descriptors, sizeof descriptors)
+ *
+ * That write establishes the endpoint configuration, configuring
+ * the controller to process bulk, interrupt, or isochronous transfers
+ * at the right maxpacket size, and so on.
+ *
+ * The descriptors are message type 1, identified by a host order u32
+ * at the beginning of what's written.  Descriptor order is: full/low
+ * speed descriptor, then optional high speed descriptor.
+ */
+static ssize_t
+ep_config (struct file *fd, const char *buf, size_t len, loff_t *ptr)
+{
+	struct ep_data		*data = fd->private_data;
+	struct usb_ep		*ep;
+	u32			tag;
+	int			value;
+
+	if ((value = down_interruptible (&data->lock)) < 0)
+		return value;
+
+	if (data->state != STATE_EP_READY) {
+		value = -EL2HLT;
+		goto fail;
+	}
+
+	value = len;
+	if (len < USB_DT_ENDPOINT_SIZE + 4)
+		goto fail0;
+
+	/* we might need to change message format someday */
+	if (copy_from_user (&tag, buf, 4)) {
+		goto fail1;
+	}
+	if (tag != 1) {
+		DBG(data->dev, "config %s, bad tag %d\n", data->name, tag);
+		goto fail0;
+	}
+	buf += 4;
+	len -= 4;
+
+	/* NOTE:  audio endpoint extensions not accepted here;
+	 * just don't include the extra bytes.
+	 */
+
+	/* full/low speed descriptor, then high speed */
+	if (copy_from_user (&data->desc, buf, USB_DT_ENDPOINT_SIZE)) {
+		goto fail1;
+	}
+	if (data->desc.bLength != USB_DT_ENDPOINT_SIZE
+			|| data->desc.bDescriptorType != USB_DT_ENDPOINT)
+		goto fail0;
+	if (len != USB_DT_ENDPOINT_SIZE) {
+		if (len != 2 * USB_DT_ENDPOINT_SIZE)
+			goto fail0;
+		if (copy_from_user (&data->hs_desc, buf + USB_DT_ENDPOINT_SIZE,
+					USB_DT_ENDPOINT_SIZE)) {
+			goto fail1;
+		}
+		if (data->hs_desc.bLength != USB_DT_ENDPOINT_SIZE
+				|| data->hs_desc.bDescriptorType
+					!= USB_DT_ENDPOINT) {
+			DBG(data->dev, "config %s, bad hs length or type\n",
+					data->name);
+			goto fail0;
+		}
+	}
+	value = len;
+
+	spin_lock_irq (&data->dev->lock);
+	if (data->dev->state == STATE_DEV_UNBOUND) {
+		value = -ENOENT;
+		goto gone;
+	} else if ((ep = data->ep) == NULL) {
+		value = -ENODEV;
+		goto gone;
+	}
+	switch (data->dev->gadget->speed) {
+	case USB_SPEED_LOW:
+	case USB_SPEED_FULL:
+		value = usb_ep_enable (ep, &data->desc);
+		if (value == 0)
+			data->state = STATE_EP_ENABLED;
+		break;
+#ifdef	HIGHSPEED
+	case USB_SPEED_HIGH:
+		/* fails if caller didn't provide that descriptor... */
+		value = usb_ep_enable (ep, &data->hs_desc);
+		if (value == 0)
+			data->state = STATE_EP_ENABLED;
+		break;
+#endif
+	default:
+		DBG (data->dev, "unconnected, %s init deferred\n",
+				data->name);
+		data->state = STATE_EP_DEFER_ENABLE;
+	}
+	if (value == 0)
+		fd->f_op = &ep_io_operations;
+gone:
+	spin_unlock_irq (&data->dev->lock);
+	if (value < 0) {
+fail:
+		data->desc.bDescriptorType = 0;
+		data->hs_desc.bDescriptorType = 0;
+	}
+	up (&data->lock);
+	return value;
+fail0:
+	value = -EINVAL;
+	goto fail;
+fail1:
+	value = -EFAULT;
+	goto fail;
+}
+
+static int
+ep_open (struct inode *inode, struct file *fd)
+{
+	struct ep_data		*data = inode->u.generic_ip;
+	int			value = -EBUSY;
+
+	if (down_interruptible (&data->lock) != 0)
+		return -EINTR;
+	spin_lock_irq (&data->dev->lock);
+	if (data->dev->state == STATE_DEV_UNBOUND)
+		value = -ENOENT;
+	else if (data->state == STATE_EP_DISABLED) {
+		value = 0;
+		data->state = STATE_EP_READY;
+		get_ep (data);
+		fd->private_data = data;
+		VDEBUG (data->dev, "%s ready\n", data->name);
+	} else
+		DBG (data->dev, "%s state %d\n",
+			data->name, data->state);
+	spin_unlock_irq (&data->dev->lock);
+	up (&data->lock);
+	return value;
+}
+
+/* used before endpoint configuration */
+static struct file_operations ep_config_operations = {
+	.owner =	THIS_MODULE,
+	.open =		ep_open,
+	.write =	ep_config,
+	.release =	ep_release,
+};
+
+/*----------------------------------------------------------------------*/
+
+/* EP0 IMPLEMENTATION can be partly in userspace.
+ *
+ * Drivers that use this facility receive various events, including
+ * control requests the kernel doesn't handle.  Drivers that don't
+ * use this facility may be too simple-minded for real applications.
+ */
+
+static inline void ep0_readable (struct dev_data *dev)
+{
+	wake_up (&dev->wait);
+	kill_fasync (&dev->fasync, SIGIO, POLL_IN);
+}
+
+static void clean_req (struct usb_ep *ep, struct usb_request *req)
+{
+	struct dev_data		*dev = ep->driver_data;
+
+	if (req->buf != dev->rbuf) {
+		usb_ep_free_buffer (ep, req->buf, req->dma, req->length);
+		req->buf = dev->rbuf;
+		req->dma = DMA_ADDR_INVALID;
+	}
+	req->complete = epio_complete;
+	dev->setup_out_ready = 0;
+}
+
+static void ep0_complete (struct usb_ep *ep, struct usb_request *req)
+{
+	struct dev_data		*dev = ep->driver_data;
+	int			free = 1;
+
+	/* for control OUT, data must still get to userspace */
+	if (!dev->setup_in) {
+		dev->setup_out_error = (req->status != 0);
+		if (!dev->setup_out_error)
+			free = 0;
+		dev->setup_out_ready = 1;
+		ep0_readable (dev);
+	} else if (dev->state == STATE_SETUP)
+		dev->state = STATE_CONNECTED;
+
+	/* clean up as appropriate */
+	if (free && req->buf != &dev->rbuf)
+		clean_req (ep, req);
+	req->complete = epio_complete;
+}
+
+static int setup_req (struct usb_ep *ep, struct usb_request *req, u16 len)
+{
+	struct dev_data	*dev = ep->driver_data;
+
+	if (dev->setup_out_ready) {
+		DBG (dev, "ep0 request busy!\n");
+		return -EBUSY;
+	}
+	if (len > sizeof (dev->rbuf))
+		req->buf = usb_ep_alloc_buffer (ep, len, &req->dma, GFP_ATOMIC);
+	if (req->buf == 0) {
+		req->buf = dev->rbuf;
+		return -ENOMEM;
+	}
+	req->complete = ep0_complete;
+	req->length = len;
+	return 0;
+}
+
+static ssize_t
+ep0_read (struct file *fd, char *buf, size_t len, loff_t *ptr)
+{
+	struct dev_data			*dev = fd->private_data;
+	ssize_t				retval;
+	enum ep0_state			state;
+
+	spin_lock_irq (&dev->lock);
+
+	/* report fd mode change before acting on it */
+	if (dev->setup_abort) {
+		dev->setup_abort = 0;
+		retval = -EIDRM;
+		goto done;
+	}
+
+	/* control DATA stage */
+	if ((state = dev->state) == STATE_SETUP) {
+
+		if (dev->setup_in) {		/* stall IN */
+			VDEBUG(dev, "ep0in stall\n");
+			(void) usb_ep_set_halt (dev->gadget->ep0);
+			retval = -EL2HLT;
+			dev->state = STATE_CONNECTED;
+
+		} else if (len == 0) {		/* ack SET_CONFIGURATION etc */
+			struct usb_ep		*ep = dev->gadget->ep0;
+			struct usb_request	*req = dev->req;
+
+			if ((retval = setup_req (ep, req, 0)) == 0)
+				retval = usb_ep_queue (ep, req, GFP_ATOMIC);
+			dev->state = STATE_CONNECTED;
+
+		} else {			/* collect OUT data */
+			if ((fd->f_flags & O_NONBLOCK) != 0
+					&& !dev->setup_out_ready) {
+				retval = -EAGAIN;
+				goto done;
+			}
+			spin_unlock_irq (&dev->lock);
+			retval = wait_event_interruptible (dev->wait,
+					dev->setup_out_ready != 0);
+
+			/* FIXME state could change from under us */
+			spin_lock_irq (&dev->lock);
+			if (retval)
+				goto done;
+			if (dev->setup_out_error)
+				retval = -EIO;
+			else {
+				len = min (len, dev->req->actual);
+// FIXME don't call this with the spinlock held ...
+				if (copy_to_user (buf, &dev->req->buf, len))
+					retval = -EFAULT;
+				clean_req (dev->gadget->ep0, dev->req);
+				/* NOTE userspace can't yet choose to stall */
+			}
+		}
+		goto done;
+	}
+
+	/* else normal: return event data */
+	if (len < sizeof dev->event [0]) {
+		retval = -EINVAL;
+		goto done;
+	}
+	len -= len % sizeof (struct usb_gadgetfs_event);
+	dev->usermode_setup = 1;
+
+scan:
+	/* return queued events right away */
+	if (dev->ev_next != 0) {
+		unsigned		i, n;
+		int			tmp = dev->ev_next;
+
+		len = min (len, tmp * sizeof (struct usb_gadgetfs_event));
+		n = len / sizeof (struct usb_gadgetfs_event);
+
+		/* ep0 can't deliver events when STATE_SETUP */
+		for (i = 0; i < n; i++) {
+			if (dev->event [i].type == GADGETFS_SETUP) {
+				len = n = i + 1;
+				len *= sizeof (struct usb_gadgetfs_event);
+				n = 0;
+				break;
+			}
+		}
+		spin_unlock_irq (&dev->lock);
+		if (copy_to_user (buf, &dev->event, len))
+			retval = -EFAULT;
+		else
+			retval = len;
+		if (len > 0) {
+			len /= sizeof (struct usb_gadgetfs_event);
+
+			/* NOTE this doesn't guard against broken drivers;
+			 * concurrent ep0 readers may lose events.
+			 */
+			spin_lock_irq (&dev->lock);
+			dev->ev_next -= len;
+			if (dev->ev_next != 0)
+				memmove (&dev->event, &dev->event [len],
+					sizeof (struct usb_gadgetfs_event)
+						* (tmp - len));
+			if (n == 0)
+				dev->state = STATE_SETUP;
+			spin_unlock_irq (&dev->lock);
+		}
+		return retval;
+	}
+	if (fd->f_flags & O_NONBLOCK) {
+		retval = -EAGAIN;
+		goto done;
+	}
+
+	switch (state) {
+	default:
+		DBG (dev, "fail %s, state %d\n", __FUNCTION__, state);
+		retval = -ESRCH;
+		break;
+	case STATE_UNCONNECTED:
+	case STATE_CONNECTED:
+		spin_unlock_irq (&dev->lock);
+		DBG (dev, "%s wait\n", __FUNCTION__);
+
+		/* wait for events */
+		retval = wait_event_interruptible (dev->wait,
+				dev->ev_next != 0);
+		if (retval < 0)
+			return retval;
+		spin_lock_irq (&dev->lock);
+		goto scan;
+	}
+
+done:
+	spin_unlock_irq (&dev->lock);
+	return retval;
+}
+
+static struct usb_gadgetfs_event *
+next_event (struct dev_data *dev, enum usb_gadgetfs_event_type type)
+{
+	struct usb_gadgetfs_event	*event;
+	unsigned			i;
+
+	switch (type) {
+	/* these events purge the queue */
+	case GADGETFS_DISCONNECT:
+		if (dev->state == STATE_SETUP)
+			dev->setup_abort = 1;
+		// FALL THROUGH
+	case GADGETFS_CONNECT:
+		dev->ev_next = 0;
+		break;
+	case GADGETFS_SETUP:		/* previous request timed out */
+	case GADGETFS_SUSPEND:		/* same effect */
+		/* these events can't be repeated */
+		for (i = 0; i != dev->ev_next; i++) {
+			if (dev->event [i].type != type)
+				continue;
+			DBG (dev, "discard old event %d\n", type);
+			dev->ev_next--;
+			if (i == dev->ev_next)
+				break;
+			/* indices start at zero, for simplicity */
+			memmove (&dev->event [i], &dev->event [i + 1],
+				sizeof (struct usb_gadgetfs_event)
+					* (dev->ev_next - i));
+		}
+		break;
+	default:
+		BUG ();
+	}
+	event = &dev->event [dev->ev_next++];
+	BUG_ON (dev->ev_next > N_EVENT);
+	VDEBUG (dev, "ev %d, next %d\n", type, dev->ev_next);
+	memset (event, 0, sizeof *event);
+	event->type = type;
+	return event;
+}
+
+static ssize_t
+ep0_write (struct file *fd, const char *buf, size_t len, loff_t *ptr)
+{
+	struct dev_data		*dev = fd->private_data;
+	ssize_t			retval = -ESRCH;
+
+	spin_lock_irq (&dev->lock);
+
+	/* report fd mode change before acting on it */
+	if (dev->setup_abort) {
+		dev->setup_abort = 0;
+		retval = -EIDRM;
+
+	/* data and/or status stage for control request */
+	} else if (dev->state == STATE_SETUP) {
+
+		/* IN DATA+STATUS caller makes len <= wLength */
+		if (dev->setup_in) {
+			retval = setup_req (dev->gadget->ep0, dev->req, len);
+			if (retval == 0) {
+				spin_unlock_irq (&dev->lock);
+				if (copy_from_user (dev->req->buf, buf, len))
+					retval = -EFAULT;
+				else
+					retval = usb_ep_queue (
+						dev->gadget->ep0, dev->req,
+						GFP_KERNEL);
+				if (retval < 0) {
+					spin_lock_irq (&dev->lock);
+					clean_req (dev->gadget->ep0, dev->req);
+					spin_unlock_irq (&dev->lock);
+				} else
+					retval = len;
+
+				return retval;
+			}
+
+		/* can stall some OUT transfers */
+		} else if (dev->setup_can_stall) {
+			VDEBUG(dev, "ep0out stall\n");
+			(void) usb_ep_set_halt (dev->gadget->ep0);
+			retval = -EL2HLT;
+			dev->state = STATE_CONNECTED;
+		} else {
+			DBG(dev, "bogus ep0out stall!\n");
+		}
+	} else
+		DBG (dev, "fail %s, state %d\n", __FUNCTION__, dev->state);
+
+	spin_unlock_irq (&dev->lock);
+	return retval;
+}
+
+static int
+ep0_fasync (int f, struct file *fd, int on)
+{
+	struct dev_data		*dev = fd->private_data;
+	// caller must F_SETOWN before signal delivery happens
+	VDEBUG (dev, "%s %s\n", __FUNCTION__, on ? "on" : "off");
+	return fasync_helper (f, fd, on, &dev->fasync);
+}
+
+static struct usb_gadget_driver gadgetfs_driver;
+
+static int
+dev_release (struct inode *inode, struct file *fd)
+{
+	struct dev_data		*dev = fd->private_data;
+
+	/* closing ep0 === shutdown all */
+
+	usb_gadget_unregister_driver (&gadgetfs_driver);
+
+	/* at this point "good" hardware has disconnected the
+	 * device from USB; the host won't see it any more.
+	 * alternatively, all host requests will time out.
+	 */
+
+	fasync_helper (-1, fd, 0, &dev->fasync);
+	kfree (dev->buf);
+	dev->buf = 0;
+	put_dev (dev);
+
+	/* other endpoints were all decoupled from this device */
+	dev->state = STATE_DEV_DISABLED;
+	return 0;
+}
+
+static int dev_ioctl (struct inode *inode, struct file *fd,
+		unsigned code, unsigned long value)
+{
+	struct dev_data		*dev = fd->private_data;
+	struct usb_gadget	*gadget = dev->gadget;
+
+	if (gadget->ops->ioctl)
+		return gadget->ops->ioctl (gadget, code, value);
+	return -ENOTTY;
+}
+
+/* used after device configuration */
+static struct file_operations ep0_io_operations = {
+	.owner =	THIS_MODULE,
+	.read =		ep0_read,
+	.write =	ep0_write,
+	.fasync =	ep0_fasync,
+	// .poll =	ep0_poll,
+	.ioctl =	dev_ioctl,
+	.release =	dev_release,
+};
+
+/*----------------------------------------------------------------------*/
+
+/* The in-kernel gadget driver handles most ep0 issues, in particular
+ * enumerating the single configuration (as provided from user space).
+ *
+ * Unrecognized ep0 requests may be handled in user space.
+ */
+
+#ifdef	HIGHSPEED
+static void make_qualifier (struct dev_data *dev)
+{
+	struct usb_qualifier_descriptor		qual;
+	struct usb_device_descriptor		*desc;
+
+	qual.bLength = sizeof qual;
+	qual.bDescriptorType = USB_DT_DEVICE_QUALIFIER;
+	qual.bcdUSB = __constant_cpu_to_le16 (0x0200);
+
+	desc = dev->dev;
+	qual.bDeviceClass = desc->bDeviceClass;
+	qual.bDeviceSubClass = desc->bDeviceSubClass;
+	qual.bDeviceProtocol = desc->bDeviceProtocol;
+
+	/* assumes ep0 uses the same value for both speeds ... */
+	qual.bMaxPacketSize0 = desc->bMaxPacketSize0;
+
+	qual.bNumConfigurations = 1;
+	qual.bRESERVED = 0;
+
+	memcpy (dev->rbuf, &qual, sizeof qual);
+}
+#endif
+
+static int
+config_buf (struct dev_data *dev, u8 type, unsigned index)
+{
+	int		len;
+#ifdef HIGHSPEED
+	int		hs;
+#endif
+
+	/* only one configuration */
+	if (index > 0)
+		return -EINVAL;
+
+#ifdef HIGHSPEED
+	hs = (dev->gadget->speed == USB_SPEED_HIGH);
+	if (type == USB_DT_OTHER_SPEED_CONFIG)
+		hs = !hs;
+	if (hs) {
+		dev->req->buf = dev->hs_config;
+		len = le16_to_cpup (&dev->hs_config->wTotalLength);
+	} else
+#endif
+	{
+		dev->req->buf = dev->config;
+		len = le16_to_cpup (&dev->config->wTotalLength);
+	}
+	((u8 *)dev->req->buf) [1] = type;
+	return len;
+}
+
+static int
+gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
+{
+	struct dev_data			*dev = get_gadget_data (gadget);
+	struct usb_request		*req = dev->req;
+	int				value = -EOPNOTSUPP;
+	struct usb_gadgetfs_event	*event;
+
+	spin_lock (&dev->lock);
+	dev->setup_abort = 0;
+	if (dev->state == STATE_UNCONNECTED) {
+		struct usb_ep	*ep;
+		struct ep_data	*data;
+
+		dev->state = STATE_CONNECTED;
+		dev->dev->bMaxPacketSize0 = gadget->ep0->maxpacket;
+
+#ifdef	HIGHSPEED
+		if (gadget->speed == USB_SPEED_HIGH && dev->hs_config == 0) {
+			ERROR (dev, "no high speed config??\n");
+			return -EINVAL;
+		}
+#endif	/* HIGHSPEED */
+
+		INFO (dev, "connected\n");
+		event = next_event (dev, GADGETFS_CONNECT);
+		event->u.speed = gadget->speed;
+		ep0_readable (dev);
+
+		list_for_each_entry (ep, &gadget->ep_list, ep_list) {
+			data = ep->driver_data;
+			/* ... down_trylock (&data->lock) ... */
+			if (data->state != STATE_EP_DEFER_ENABLE)
+				continue;
+#ifdef	HIGHSPEED
+			if (gadget->speed == USB_SPEED_HIGH)
+				value = usb_ep_enable (ep, &data->hs_desc);
+			else
+#endif	/* HIGHSPEED */
+				value = usb_ep_enable (ep, &data->desc);
+			if (value) {
+				ERROR (dev, "deferred %s enable --> %d\n",
+					data->name, value);
+				continue;
+			}
+			data->state = STATE_EP_ENABLED;
+			wake_up (&data->wait);
+			DBG (dev, "woke up %s waiters\n", data->name);
+		}
+
+	/* host may have given up waiting for response.  we can miss control
+	 * requests handled lower down (device/endpoint status and features);
+	 * then ep0_{read,write} will report the wrong status. controller
+	 * driver will have aborted pending i/o.
+	 */
+	} else if (dev->state == STATE_SETUP)
+		dev->setup_abort = 1;
+
+	req->buf = dev->rbuf;
+	req->dma = DMA_ADDR_INVALID;
+	req->context = 0;
+	value = -EOPNOTSUPP;
+	switch (ctrl->bRequest) {
+
+	case USB_REQ_GET_DESCRIPTOR:
+		if (ctrl->bRequestType != USB_DIR_IN)
+			goto unrecognized;
+		switch (ctrl->wValue >> 8) {
+
+		case USB_DT_DEVICE:
+			value = min (ctrl->wLength, (u16) sizeof *dev->dev);
+			req->buf = dev->dev;
+			break;
+#ifdef	HIGHSPEED
+		case USB_DT_DEVICE_QUALIFIER:
+			if (!dev->hs_config)
+				break;
+			value = min (ctrl->wLength, (u16)
+				sizeof (struct usb_qualifier_descriptor));
+			make_qualifier (dev);
+			break;
+		case USB_DT_OTHER_SPEED_CONFIG:
+			// FALLTHROUGH
+#endif
+		case USB_DT_CONFIG:
+			value = config_buf (dev,
+					ctrl->wValue >> 8,
+					ctrl->wValue & 0xff);
+			if (value >= 0)
+				value = min (ctrl->wLength, (u16) value);
+			break;
+
+		default:
+			goto unrecognized;
+		}
+		break;
+
+	/* currently one config, two speeds */
+	case USB_REQ_SET_CONFIGURATION:
+		if (ctrl->bRequestType != 0)
+			break;
+		if (0 == (u8) ctrl->wValue) {
+			value = 0;
+			dev->current_config = 0;
+			// user mode expected to disable endpoints
+		} else {
+			u8	config;
+#ifdef	HIGHSPEED
+			if (gadget->speed == USB_SPEED_HIGH)
+				config = dev->hs_config->bConfigurationValue;
+			else
+#endif
+				config = dev->config->bConfigurationValue;
+
+			if (config == (u8) ctrl->wValue) {
+				value = 0;
+				dev->current_config = config;
+			}
+		}
+
+		/* report SET_CONFIGURATION like any other control request,
+		 * except that usermode may not stall this.  the next
+		 * request mustn't be allowed start until this finishes:
+		 * endpoints and threads set up, etc.
+		 *
+		 * NOTE:  older PXA hardware (before PXA 255: without UDCCFR)
+		 * has bad/racey automagic that prevents synchronizing here.
+		 * even kernel mode drivers often miss them.
+		 */
+		if (value == 0) {
+			INFO (dev, "configuration #%d\n", dev->current_config);
+			if (dev->usermode_setup) {
+				dev->setup_can_stall = 0;
+				goto delegate;
+			}
+		}
+		break;
+
+#ifndef	CONFIG_USB_GADGETFS_PXA2XX
+	/* PXA automagically handles this request too */
+	case USB_REQ_GET_CONFIGURATION:
+		if (ctrl->bRequestType != 0x80)
+			break;
+		*(u8 *)req->buf = dev->current_config;
+		value = min (ctrl->wLength, (u16) 1);
+		break;
+#endif
+
+	default:
+unrecognized:
+		VDEBUG (dev, "%s req%02x.%02x v%04x i%04x l%d\n",
+			dev->usermode_setup ? "delegate" : "fail",
+			ctrl->bRequestType, ctrl->bRequest,
+			ctrl->wValue, ctrl->wIndex, ctrl->wLength);
+
+		/* if there's an ep0 reader, don't stall */
+		if (dev->usermode_setup) {
+			dev->setup_can_stall = 1;
+delegate:
+			dev->setup_in = (ctrl->bRequestType & USB_DIR_IN)
+						? 1 : 0;
+			dev->setup_out_ready = 0;
+			dev->setup_out_error = 0;
+			value = 0;
+
+			/* read DATA stage for OUT right away */
+			if (unlikely (!dev->setup_in && ctrl->wLength)) {
+				value = setup_req (gadget->ep0, dev->req,
+							ctrl->wLength);
+				if (value < 0)
+					break;
+				value = usb_ep_queue (gadget->ep0, dev->req,
+							GFP_ATOMIC);
+				if (value < 0) {
+					clean_req (gadget->ep0, dev->req);
+					break;
+				}
+
+				/* we can't currently stall these */
+				dev->setup_can_stall = 0;
+			}
+
+			/* state changes when reader collects event */
+			event = next_event (dev, GADGETFS_SETUP);
+			event->u.setup = *ctrl;
+			ep0_readable (dev);
+			spin_unlock (&dev->lock);
+			return 0;
+		}
+	}
+
+	/* proceed with data transfer and status phases? */
+	if (value >= 0 && dev->state != STATE_SETUP) {
+		req->length = value;
+		value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC);
+		if (value < 0) {
+			DBG (dev, "ep_queue --> %d\n", value);
+			req->status = 0;
+		}
+	}
+
+	/* device stalls when value < 0 */
+	spin_unlock (&dev->lock);
+	return value;
+}
+
+static void destroy_ep_files (struct dev_data *dev)
+{
+	struct list_head	*entry, *tmp;
+
+	DBG (dev, "%s %d\n", __FUNCTION__, dev->state);
+
+	/* dev->state must prevent interference */
+restart:
+	spin_lock_irq (&dev->lock);
+	list_for_each_safe (entry, tmp, &dev->epfiles) {
+		struct ep_data	*ep;
+		struct inode	*parent;
+		struct dentry	*dentry;
+
+		/* break link to FS */
+		ep = list_entry (entry, struct ep_data, epfiles);
+		list_del_init (&ep->epfiles);
+		dentry = ep->dentry;
+		ep->dentry = 0;
+		parent = dentry->d_parent->d_inode;
+
+		/* break link to controller */
+		if (ep->state == STATE_EP_ENABLED)
+			(void) usb_ep_disable (ep->ep);
+		ep->state = STATE_EP_UNBOUND;
+		usb_ep_free_request (ep->ep, ep->req);
+		ep->ep = 0;
+		wake_up (&ep->wait);
+		put_ep (ep);
+
+		spin_unlock_irq (&dev->lock);
+
+		/* break link to dcache */
+		down (&parent->i_sem);
+		d_delete (dentry);
+		dput (dentry);
+		up (&parent->i_sem);
+
+		/* fds may still be open */
+		goto restart;
+	}
+	spin_unlock_irq (&dev->lock);
+}
+
+
+static struct inode *
+gadgetfs_create_file (struct super_block *sb, char const *name,
+		void *data, struct file_operations *fops,
+		struct dentry **dentry_p);
+
+static int activate_ep_files (struct dev_data *dev)
+{
+	struct usb_ep	*ep;
+
+	gadget_for_each_ep (ep, dev->gadget) {
+		struct ep_data	*data;
+
+		data = kmalloc (sizeof *data, GFP_KERNEL);
+		if (!data)
+			goto enomem;
+		memset (data, 0, sizeof data);
+		data->state = STATE_EP_DISABLED;
+		init_MUTEX (&data->lock);
+		init_waitqueue_head (&data->wait);
+
+		strncpy (data->name, ep->name, sizeof (data->name) - 1);
+		atomic_set (&data->count, 1);
+		data->dev = dev;
+		get_dev (dev);
+
+		data->ep = ep;
+		ep->driver_data = data;
+
+		data->req = usb_ep_alloc_request (ep, GFP_KERNEL);
+		if (!data->req)
+			goto enomem;
+
+		data->inode = gadgetfs_create_file (dev->sb, data->name,
+				data, &ep_config_operations,
+				&data->dentry);
+		if (!data->inode) {
+			kfree (data);
+			goto enomem;
+		}
+		list_add_tail (&data->epfiles, &dev->epfiles);
+	}
+	return 0;
+
+enomem:
+	DBG (dev, "%s enomem\n", __FUNCTION__);
+	destroy_ep_files (dev);
+	return -ENOMEM;
+}
+
+static void
+gadgetfs_unbind (struct usb_gadget *gadget)
+{
+	struct dev_data		*dev = get_gadget_data (gadget);
+
+	DBG (dev, "%s\n", __FUNCTION__);
+
+	spin_lock_irq (&dev->lock);
+	dev->state = STATE_DEV_UNBOUND;
+	spin_unlock_irq (&dev->lock);
+
+	destroy_ep_files (dev);
+	gadget->ep0->driver_data = 0;
+	set_gadget_data (gadget, 0);
+
+	/* we've already been disconnected ... no i/o is active */
+	if (dev->req)
+		usb_ep_free_request (gadget->ep0, dev->req);
+	DBG (dev, "%s done\n", __FUNCTION__);
+	put_dev (dev);
+}
+
+static struct dev_data		*the_device;
+
+static int
+gadgetfs_bind (struct usb_gadget *gadget)
+{
+	struct dev_data		*dev = the_device;
+
+	if (!dev)
+		return -ESRCH;
+	if (0 != strcmp (CHIP, gadget->name)) {
+		printk (KERN_ERR "%s expected " CHIP " controller not %s\n",
+			shortname, gadget->name);
+		return -ENODEV;
+	}
+
+	set_gadget_data (gadget, dev);
+	dev->gadget = gadget;
+	gadget->ep0->driver_data = dev;
+	dev->dev->bMaxPacketSize0 = gadget->ep0->maxpacket;
+
+	/* preallocate control response and buffer */
+	dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL);
+	if (!dev->req)
+		goto enomem;
+	dev->req->context = 0;
+	dev->req->complete = epio_complete;
+
+	if (activate_ep_files (dev) < 0)
+		goto enomem;
+
+	INFO (dev, "bound to %s driver\n", gadget->name);
+	dev->state = STATE_UNCONNECTED;
+	get_dev (dev);
+	return 0;
+
+enomem:
+	gadgetfs_unbind (gadget);
+	return -ENOMEM;
+}
+
+static void
+gadgetfs_disconnect (struct usb_gadget *gadget)
+{
+	struct dev_data		*dev = get_gadget_data (gadget);
+
+	if (dev->state == STATE_UNCONNECTED) {
+		DBG (dev, "already unconnected\n");
+		return;
+	}
+	dev->state = STATE_UNCONNECTED;
+
+	INFO (dev, "disconnected\n");
+	spin_lock (&dev->lock);
+	next_event (dev, GADGETFS_DISCONNECT);
+	ep0_readable (dev);
+	spin_unlock (&dev->lock);
+}
+
+static void
+gadgetfs_suspend (struct usb_gadget *gadget)
+{
+	struct dev_data		*dev = get_gadget_data (gadget);
+
+	INFO (dev, "suspended from state %d\n", dev->state);
+	spin_lock (&dev->lock);
+	switch (dev->state) {
+	case STATE_SETUP:		// VERY odd... host died??
+	case STATE_CONNECTED:
+	case STATE_UNCONNECTED:
+		next_event (dev, GADGETFS_SUSPEND);
+		ep0_readable (dev);
+		/* FALLTHROUGH */
+	default:
+		break;
+	}
+	spin_unlock (&dev->lock);
+}
+
+static struct usb_gadget_driver gadgetfs_driver = {
+#ifdef	HIGHSPEED
+	.speed		= USB_SPEED_HIGH,
+#else
+	.speed		= USB_SPEED_FULL,
+#endif
+	.function	= (char *) driver_desc,
+	.bind		= gadgetfs_bind,
+	.unbind		= gadgetfs_unbind,
+	.setup		= gadgetfs_setup,
+	.disconnect	= gadgetfs_disconnect,
+	.suspend	= gadgetfs_suspend,
+
+	.driver 	= {
+		.name		= (char *) shortname,
+		// .shutdown = ...
+		// .suspend = ...
+		// .resume = ...
+	},
+};
+
+/*----------------------------------------------------------------------*/
+
+/* DEVICE INITIALIZATION
+ *
+ *     fd = open ("/dev/gadget/$CHIP", O_RDWR)
+ *     status = write (fd, descriptors, sizeof descriptors)
+ *
+ * That write establishes the device configuration, so the kernel can
+ * bind to the controller ... guaranteeing it can handle enumeration
+ * at all necessary speeds.  Descriptor order is:
+ *
+ * . message tag (u32, host order) ... for now, must be zero; it
+ *	would change to support features like multi-config devices
+ * . full/low speed config ... all wTotalLength bytes (with interface,
+ *	class, altsetting, endpoint, and other descriptors)
+ * . high speed config ... all descriptors, for high speed operation;
+ * 	this one's optional except for high-speed hardware
+ * . device descriptor
+ *
+ * Endpoints are not yet enabled. Drivers may want to immediately
+ * initialize them, using the /dev/gadget/ep* files that are available
+ * as soon as the kernel sees the configuration, or they can wait
+ * until device configuration and interface altsetting changes create
+ * the need to configure (or unconfigure) them.
+ *
+ * After initialization, the device stays active for as long as that
+ * $CHIP file is open.  Events may then be read from that descriptor,
+ * such configuration notifications.  More complex drivers will handle
+ * some control requests in user space.
+ */
+
+static int is_valid_config (struct usb_config_descriptor *config)
+{
+	return config->bDescriptorType == USB_DT_CONFIG
+		&& config->bLength == USB_DT_CONFIG_SIZE
+		&& config->bConfigurationValue != 0
+		&& (config->bmAttributes & USB_CONFIG_ATT_ONE) != 0
+		&& (config->bmAttributes & USB_CONFIG_ATT_WAKEUP) == 0;
+	/* FIXME check lengths: walk to end */
+}
+
+static ssize_t
+dev_config (struct file *fd, const char *buf, size_t len, loff_t *ptr)
+{
+	struct dev_data		*dev = fd->private_data;
+	ssize_t			value = len, length = len;
+	unsigned		total;
+	u32			tag;
+	char			*kbuf;
+
+	if (dev->state != STATE_OPENED)
+		return -EEXIST;
+
+	if (len < (USB_DT_CONFIG_SIZE + USB_DT_DEVICE_SIZE + 4))
+		return -EINVAL;
+
+	/* we might need to change message format someday */
+	if (copy_from_user (&tag, buf, 4))
+		return -EFAULT;
+	if (tag != 0)
+		return -EINVAL;
+	buf += 4;
+	length -= 4;
+
+	kbuf = kmalloc (length, SLAB_KERNEL);
+	if (!kbuf)
+		return -ENOMEM;
+	if (copy_from_user (kbuf, buf, length)) {
+		kfree (kbuf);
+		return -EFAULT;
+	}
+
+	spin_lock_irq (&dev->lock);
+	value = -EINVAL;
+	if (dev->buf)
+		goto fail;
+	dev->buf = kbuf;
+
+	/* full or low speed config */
+	dev->config = (void *) kbuf;
+	total = le16_to_cpup (&dev->config->wTotalLength);
+	if (!is_valid_config (dev->config) || total >= length)
+		goto fail;
+	kbuf += total;
+	length -= total;
+
+	/* optional high speed config */
+	if (kbuf [1] == USB_DT_CONFIG) {
+		dev->hs_config = (void *) kbuf;
+		total = le16_to_cpup (&dev->hs_config->wTotalLength);
+		if (!is_valid_config (dev->hs_config) || total >= length)
+			goto fail;
+		kbuf += total;
+		length -= total;
+	}
+
+	/* could support multiple configs, using another encoding! */
+
+	/* device descriptor (tweaked for paranoia) */
+	if (length != USB_DT_DEVICE_SIZE)
+		goto fail;
+	dev->dev = (void *)kbuf;
+	if (dev->dev->bLength != USB_DT_DEVICE_SIZE
+			|| dev->dev->bDescriptorType != USB_DT_DEVICE
+			|| dev->dev->bNumConfigurations != 1)
+		goto fail;
+	dev->dev->bNumConfigurations = 1;
+	dev->dev->bcdUSB = __constant_cpu_to_le16 (0x0200);
+
+	/* triggers gadgetfs_bind(); then we can enumerate. */
+	spin_unlock_irq (&dev->lock);
+	value = usb_gadget_register_driver (&gadgetfs_driver);
+	if (value != 0) {
+		kfree (dev->buf);
+		dev->buf = 0;
+	} else {
+		/* at this point "good" hardware has for the first time
+		 * let the USB the host see us.  alternatively, if users
+		 * unplug/replug that will clear all the error state.
+		 *
+		 * note:  everything running before here was guaranteed
+		 * to choke driver model style diagnostics.  from here
+		 * on, they can work ... except in cleanup paths that
+		 * kick in after the ep0 descriptor is closed.
+		 */
+		fd->f_op = &ep0_io_operations;
+		value = len;
+	}
+	return value;
+
+fail:
+	spin_unlock_irq (&dev->lock);
+	pr_debug ("%s: %s fail %d, %p\n", shortname, __FUNCTION__, value, dev);
+	kfree (dev->buf);
+	dev->buf = 0;
+	return value;
+}
+
+static int
+dev_open (struct inode *inode, struct file *fd)
+{
+	struct dev_data		*dev = inode->u.generic_ip;
+	int			value = -EBUSY;
+
+	if (dev->state == STATE_DEV_DISABLED) {
+		dev->ev_next = 0;
+		dev->state = STATE_OPENED;
+		fd->private_data = dev;
+		get_dev (dev);
+		value = 0;
+	}
+	return value;
+}
+
+static struct file_operations dev_init_operations = {
+	.owner =	THIS_MODULE,
+	.open =		dev_open,
+	.write =	dev_config,
+	.fasync =	ep0_fasync,
+	.ioctl =	dev_ioctl,
+	.release =	dev_release,
+};
+
+/*----------------------------------------------------------------------*/
+
+/* FILESYSTEM AND SUPERBLOCK OPERATIONS
+ *
+ * Mounting the filesystem creates a controller file, used first for
+ * device configuration then later for event monitoring.
+ */
+
+
+/* FIXME PAM etc could set this security policy without mount options
+ * if epfiles inherited ownership and permissons from ep0 ...
+ */
+
+static unsigned default_uid;
+static unsigned default_gid;
+static unsigned default_perm = S_IRUSR | S_IWUSR;
+
+module_param (default_uid, uint, 0644);
+module_param (default_gid, uint, 0644);
+module_param (default_perm, uint, 0644);
+
+
+static struct inode *
+gadgetfs_make_inode (struct super_block *sb,
+		void *data, struct file_operations *fops,
+		int mode)
+{
+	struct inode *inode = new_inode (sb);
+
+	if (inode) {
+		inode->i_mode = mode;
+		inode->i_uid = default_uid;
+		inode->i_gid = default_gid;
+		inode->i_blksize = PAGE_CACHE_SIZE;
+		inode->i_blocks = 0;
+		inode->i_atime = inode->i_mtime = inode->i_ctime
+				= CURRENT_TIME;
+		inode->u.generic_ip = data;
+		inode->i_fop = fops;
+	}
+	return inode;
+}
+
+/* creates in fs root directory, so non-renamable and non-linkable.
+ * so inode and dentry are paired, until device reconfig.
+ */
+static struct inode *
+gadgetfs_create_file (struct super_block *sb, char const *name,
+		void *data, struct file_operations *fops,
+		struct dentry **dentry_p)
+{
+	struct dentry	*dentry;
+	struct inode	*inode;
+	struct qstr	qname;
+
+	qname.name = name;
+	qname.len = strlen (name);
+	qname.hash = full_name_hash (qname.name, qname.len);
+	dentry = d_alloc (sb->s_root, &qname);
+	if (!dentry)
+		return 0;
+
+	inode = gadgetfs_make_inode (sb, data, fops,
+			S_IFREG | (default_perm & S_IRWXUGO));
+	if (!inode) {
+		dput(dentry);
+		return 0;
+	}
+	d_add (dentry, inode);
+	*dentry_p = dentry;
+	return inode;
+}
+
+static struct super_operations gadget_fs_operations = {
+	.statfs =	simple_statfs,
+	.drop_inode =	generic_delete_inode,
+};
+
+static int
+gadgetfs_fill_super (struct super_block *sb, void *opts, int silent)
+{
+	struct inode	*inode;
+	struct dentry	*d;
+	struct dev_data	*dev;
+
+	if (the_device)
+		return -ESRCH;
+
+	/* superblock */
+	sb->s_blocksize = PAGE_CACHE_SIZE;
+	sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
+	sb->s_magic = GADGETFS_MAGIC;
+	sb->s_op = &gadget_fs_operations;
+
+	/* root inode */
+	inode = gadgetfs_make_inode (sb,
+			0, &simple_dir_operations,
+			S_IFDIR | S_IRUGO | S_IXUGO);
+	if (!inode)
+		return -ENOMEM;
+	inode->i_op = &simple_dir_inode_operations;
+	if (!(d = d_alloc_root (inode))) {
+enomem:
+		iput (inode);
+		return -ENOMEM;
+	}
+	sb->s_root = d;
+
+	/* the ep0 file is named after the controller we expect;
+	 * user mode code can use it for sanity checks, like we do.
+	 */
+	dev = dev_new ();
+	if (!dev)
+		goto enomem;
+	dev->sb = sb;
+	if (!(inode = gadgetfs_create_file (sb, CHIP,
+				dev, &dev_init_operations,
+				&dev->dentry)))
+		goto enomem;
+
+	/* other endpoint files are available after hardware setup,
+	 * from binding to a controller.
+	 */
+	the_device = dev;
+	return 0;
+}
+
+/* "mount -t gadgetfs path /dev/gadget" ends up here */
+static struct super_block *
+gadgetfs_get_sb (struct file_system_type *t, int flags,
+		const char *path, void *opts)
+{
+	return get_sb_single (t, flags, opts, gadgetfs_fill_super);
+}
+
+static void
+gadgetfs_kill_sb (struct super_block *sb)
+{
+	kill_litter_super (sb);
+	put_dev (the_device);
+	the_device = 0;
+}
+
+/*----------------------------------------------------------------------*/
+
+static struct file_system_type gadgetfs_type = {
+	.owner		= THIS_MODULE,
+	.name		= shortname,
+	.get_sb		= gadgetfs_get_sb,
+	.kill_sb	= gadgetfs_kill_sb,
+};
+
+/*----------------------------------------------------------------------*/
+
+static int __init init (void)
+{
+	int status;
+
+	status = register_filesystem (&gadgetfs_type);
+	if (status == 0)
+		pr_info ("%s: %s, version " DRIVER_VERSION "\n",
+			shortname, driver_desc);
+	return status;
+}
+module_init (init);
+
+static void __exit cleanup (void)
+{
+	pr_debug ("unregister %s\n", shortname);
+	unregister_filesystem (&gadgetfs_type);
+}
+module_exit (cleanup);
+

drivers/usb/host/uhci-hcd.c

@@ -156,6 +156,7 @@ static struct uhci_td *uhci_alloc_td(struct uhci_hcd *uhci, struct usb_device *d
 	td->dev = dev;
 
 	INIT_LIST_HEAD(&td->list);
+	INIT_LIST_HEAD(&td->remove_list);
 	INIT_LIST_HEAD(&td->fl_list);
 
 	usb_get_dev(dev);
@@ -286,6 +287,8 @@ static void uhci_free_td(struct uhci_hcd *uhci, struct uhci_td *td)
 {
 	if (!list_empty(&td->list))
 		dbg("td %p is still in list!", td);
+	if (!list_empty(&td->remove_list))
+		dbg("td %p still in remove_list!", td);
 	if (!list_empty(&td->fl_list))
 		dbg("td %p is still in fl_list!", td);
 
@@ -702,6 +705,7 @@ static void uhci_destroy_urb_priv(struct uhci_hcd *uhci, struct urb *urb)
 {
 	struct list_head *head, *tmp;
 	struct urb_priv *urbp;
+	unsigned long flags;
 
 	urbp = (struct urb_priv *)urb->hcpriv;
 	if (!urbp)
@@ -713,6 +717,13 @@ static void uhci_destroy_urb_priv(struct uhci_hcd *uhci, struct urb *urb)
 	if (!list_empty(&urbp->complete_list))
 		warn("uhci_destroy_urb_priv: urb %p still on uhci->complete_list", urb);
 
+	spin_lock_irqsave(&uhci->td_remove_list_lock, flags);
+
+	/* Check to see if the remove list is empty. Set the IOC bit */
+	/* to force an interrupt so we can remove the TD's*/
+	if (list_empty(&uhci->td_remove_list))
+		uhci_set_next_interrupt(uhci);
+
 	head = &urbp->td_list;
 	tmp = head->next;
 	while (tmp != head) {
@@ -722,9 +733,11 @@ static void uhci_destroy_urb_priv(struct uhci_hcd *uhci, struct urb *urb)
 
 		uhci_remove_td_from_urb(td);
 		uhci_remove_td(uhci, td);
-		uhci_free_td(uhci, td);
+		list_add(&td->remove_list, &uhci->td_remove_list);
 	}
 
+	spin_unlock_irqrestore(&uhci->td_remove_list_lock, flags);
+
 	urb->hcpriv = NULL;
 	kmem_cache_free(uhci_up_cachep, urbp);
 }
@@ -1801,6 +1814,26 @@ static void uhci_free_pending_qhs(struct uhci_hcd *uhci)
 	spin_unlock_irqrestore(&uhci->qh_remove_list_lock, flags);
 }
 
+static void uhci_free_pending_tds(struct uhci_hcd *uhci)
+{
+	struct list_head *tmp, *head;
+	unsigned long flags;
+
+	spin_lock_irqsave(&uhci->td_remove_list_lock, flags);
+	head = &uhci->td_remove_list;
+	tmp = head->next;
+	while (tmp != head) {
+		struct uhci_td *td = list_entry(tmp, struct uhci_td, remove_list);
+
+		tmp = tmp->next;
+
+		list_del_init(&td->remove_list);
+
+		uhci_free_td(uhci, td);
+	}
+	spin_unlock_irqrestore(&uhci->td_remove_list_lock, flags);
+}
+
 static void uhci_finish_urb(struct usb_hcd *hcd, struct urb *urb, struct pt_regs *regs)
 {
 	struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
@@ -1899,6 +1932,8 @@ static void uhci_irq(struct usb_hcd *hcd, struct pt_regs *regs)
 
 	uhci_free_pending_qhs(uhci);
 
+	uhci_free_pending_tds(uhci);
+
 	uhci_remove_pending_qhs(uhci);
 
 	uhci_clear_next_interrupt(uhci);
@@ -2207,6 +2242,9 @@ static int uhci_start(struct usb_hcd *hcd)
 	spin_lock_init(&uhci->qh_remove_list_lock);
 	INIT_LIST_HEAD(&uhci->qh_remove_list);
 
+	spin_lock_init(&uhci->td_remove_list_lock);
+	INIT_LIST_HEAD(&uhci->td_remove_list);
+
 	spin_lock_init(&uhci->urb_remove_list_lock);
 	INIT_LIST_HEAD(&uhci->urb_remove_list);
 
@@ -2418,11 +2456,13 @@ static void uhci_stop(struct usb_hcd *hcd)
 	 * to this bus since there are no more parents
 	 */
 	uhci_free_pending_qhs(uhci);
+	uhci_free_pending_tds(uhci);
 	uhci_remove_pending_qhs(uhci);
 
 	reset_hc(uhci);
 
 	uhci_free_pending_qhs(uhci);
+	uhci_free_pending_tds(uhci);
 
 	release_uhci(uhci);
 }

drivers/usb/host/uhci-hcd.h

@@ -190,6 +190,7 @@ struct uhci_td {
 	struct urb *urb;
 
 	struct list_head list;		/* P: urb->lock */
+	struct list_head remove_list;	/* P: uhci->td_remove_list_lock */
 
 	int frame;			/* for iso: what frame? */
 	struct list_head fl_list;	/* P: uhci->frame_list_lock */
@@ -350,6 +351,10 @@ struct uhci_hcd {
 	spinlock_t qh_remove_list_lock;
 	struct list_head qh_remove_list;	/* P: uhci->qh_remove_list_lock */
 
+	/* List of TD's that are done, but waiting to be freed (race) */
+	spinlock_t td_remove_list_lock;
+	struct list_head td_remove_list;	/* P: uhci->td_remove_list_lock */
+
 	/* List of asynchronously unlinked URB's */
 	spinlock_t urb_remove_list_lock;
 	struct list_head urb_remove_list;	/* P: uhci->urb_remove_list_lock */

drivers/usb/serial/pl2303.c

@@ -245,6 +245,7 @@ static void pl2303_set_termios (struct usb_serial_port *port, struct termios *ol
 	unsigned char *buf;
 	int baud;
 	int i;
+	u8 control;
 
 	dbg("%s -  port %d", __FUNCTION__, port->number);
 
@@ -360,17 +361,19 @@ static void pl2303_set_termios (struct usb_serial_port *port, struct termios *ol
 			     0, 0, buf, 7, 100);
 	dbg ("0x21:0x20:0:0  %d", i);
 
-	if (cflag && CBAUD) {
-		u8 control;
-
+	/* change control lines if we are switching to or from B0 */
 	spin_lock_irqsave(&priv->lock, flags);
-		if ((cflag && CBAUD) == B0)
+	control = priv->line_control;
+	if ((cflag & CBAUD) == B0)
 		priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
 	else
 		priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
+	if (control != priv->line_control) {
 		control = priv->line_control;
 		spin_unlock_irqrestore(&priv->lock, flags);
-		set_control_lines (serial->dev, control);
+		set_control_lines(serial->dev, control);
+	} else {
+		spin_unlock_irqrestore(&priv->lock, flags);
 	}
 	
 	buf[0] = buf[1] = buf[2] = buf[3] = buf[4] = buf[5] = buf[6] = 0;
@@ -404,6 +407,9 @@ static int pl2303_open (struct usb_serial_port *port, struct file *filp)
 		
 	dbg("%s -  port %d", __FUNCTION__, port->number);
 
+	usb_clear_halt(serial->dev, port->write_urb->pipe);
+	usb_clear_halt(serial->dev, port->read_urb->pipe);
+
 #define FISH(a,b,c,d)								\
 	result=usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev,0),	\
 			       b, a, c, d, buf, 1, 100);			\

drivers/usb/storage/unusual_devs.h

@@ -618,6 +618,13 @@ UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
+/* Submitted by Joris Struyve <joris@struyve.be> */
+UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff,
+		"Medion",
+		"MD 7425",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_INQUIRY),
+
 /* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
  * Tested on hardware version 1.10.
  * Entry is needed only for the initializer function override.

include/linux/usb_gadgetfs.h

+
+#include <asm/types.h>
+#include <asm/ioctl.h>
+
+#include <linux/usb_ch9.h>
+
+/*
+ * Filesystem based user-mode API to USB Gadget controller hardware
+ *
+ * Almost everything can be done with only read and write operations,
+ * on endpoint files found in one directory.  They are configured by
+ * writing descriptors, and then may be used for normal stream style
+ * i/o requests.  When ep0 is configured, the device can enumerate;
+ * when it's closed, the device disconnects from usb.
+ *
+ * Configuration and device descriptors get written to /dev/gadget/$CHIP,
+ * which may then be used to read usb_gadgetfs_event structs.  The driver
+ * may activate endpoints as it handles SET_CONFIGURATION setup events,
+ * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT
+ * then performing data transfers by reading or writing.
+ */
+
+/*
+ * Events are delivered on the ep0 file descriptor, if the user mode driver
+ * reads from this file descriptor after writing the descriptors.  Don't
+ * stop polling this descriptor, if you write that kind of driver.
+ */
+
+enum usb_gadgetfs_event_type {
+	GADGETFS_NOP = 0,
+
+	GADGETFS_CONNECT,
+	GADGETFS_DISCONNECT,
+	GADGETFS_SETUP,
+	GADGETFS_SUSPEND,
+	// and likely more !
+};
+
+struct usb_gadgetfs_event {
+	enum usb_gadgetfs_event_type	type;
+	union {
+		// NOP, DISCONNECT, SUSPEND: nothing
+		// ... some hardware can't report disconnection
+
+		// CONNECT: just the speed
+		enum usb_device_speed	speed;
+
+		// SETUP: packet; DATA phase i/o precedes next event
+		// (setup.bmRequestType & USB_DIR_IN) flags direction 
+		// ... includes SET_CONFIGURATION, SET_INTERFACE
+		struct usb_ctrlrequest	setup;
+	} u;
+};
+
+
+/* endpoint ioctls */
+
+/* IN transfers may be reported to the gadget driver as complete
+ * 	when the fifo is loaded, before the host reads the data;
+ * OUT transfers may be reported to the host's "client" driver as
+ * 	complete when they're sitting in the FIFO unread.
+ * THIS returns how many bytes are "unclaimed" in the endpoint fifo
+ * (needed for precise fault handling, when the hardware allows it)
+ */
+#define	GADGETFS_FIFO_STATUS	_IO('g',1)
+
+/* discards any unclaimed data in the fifo. */
+#define	GADGETFS_FIFO_FLUSH	_IO('g',2)
+
+/* resets endpoint halt+toggle; used to implement set_interface.
+ * some hardware (like pxa2xx) can't support this.
+ */
+#define	GADGETFS_CLEAR_HALT	_IO('g',3)
+
+