Commit 43c78e11 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

Merge remote-tracking branch 'docs-next/docs-next' into devel/docs-next

* docs-next/docs-next: (51 commits)
  docs-rst: add package adjustbox
  docs-rst: Fix an warning when in interactive mode
  docs-rst: Use better colors for note/warning/attention boxes
  docs-rst: conf.py: adjust the size of .. note:: tag
  docs-rst: add support for LaTeX output
  doc-rst: migrate ioctl CEC_DQEVENT to c-domain
  doc-rst: Revert "kernel-doc: fix handling of address_space tags"
  doc-rst: moved *duplicate* warnings to nitpicky mode
  doc-rst:c-domain: ref-name of a function declaration
  doc-rst: add boilerplate to customize c-domain
  docs: Sphinxify gdb-kernel-debugging.txt and move to dev-tools
  docs: sphinxify kmemcheck.txt and move to dev-tools
  docs: sphinxify kmemleak.txt and move it to dev-tools
  docs: sphinxify ubsan.txt and move it to dev-tools
  docs: sphinxify kasan.txt and move to dev-tools
  docs: sphinixfy gcov.txt and move to dev-tools
  docs: sphinxify kcov.txt and move to dev-tools
  docs: sphinxify sparse.txt and move to dev-tools
  docs: sphinxify coccinelle.txt and add it to dev-tools
  docs: create a new dev-tools directory
  ...
parents 71fb2c74 8d8f60c5
......@@ -396,9 +396,13 @@ locations and some common work such as cleanup has to be done. If there is no
cleanup needed then just return directly.
Choose label names which say what the goto does or why the goto exists. An
example of a good name could be "out_buffer:" if the goto frees "buffer". Avoid
using GW-BASIC names like "err1:" and "err2:". Also don't name them after the
goto location like "err_kmalloc_failed:"
example of a good name could be "out_free_buffer:" if the goto frees "buffer".
Avoid using GW-BASIC names like "err1:" and "err2:", as you would have to
renumber them if you ever add or remove exit paths, and they make correctness
difficult to verify anyway.
It is advised to indent labels with a single space (not tab), so that
"diff -p" does not confuse labels with functions.
The rationale for using gotos is:
......@@ -425,20 +429,29 @@ The rationale for using gotos is:
goto out_buffer;
}
...
out_buffer:
out_free_buffer:
kfree(buffer);
return result;
}
A common type of bug to be aware of is "one err bugs" which look like this:
err:
err:
kfree(foo->bar);
kfree(foo);
return ret;
The bug in this code is that on some exit paths "foo" is NULL. Normally the
fix for this is to split it up into two error labels "err_bar:" and "err_foo:".
fix for this is to split it up into two error labels "err_free_bar:" and
"err_free_foo:":
err_free_bar:
kfree(foo->bar);
err_free_foo:
kfree(foo);
return ret;
Ideally you should simulate errors to test all exit paths.
Chapter 8: Commenting
......@@ -461,9 +474,6 @@ When commenting the kernel API functions, please use the kernel-doc format.
See the files Documentation/kernel-documentation.rst and scripts/kernel-doc
for details.
Linux style for comments is the C89 "/* ... */" style.
Don't use C99-style "// ..." comments.
The preferred style for long (multi-line) comments is:
/*
......
......@@ -22,9 +22,15 @@ ifeq ($(DOCBOOKS),)
# Skip DocBook build if the user explicitly requested no DOCBOOKS.
.DEFAULT:
@echo " SKIP DocBook $@ target (DOCBOOKS=\"\" specified)."
else
ifneq ($(SPHINXDIRS),)
# Skip DocBook build if the user explicitly requested a sphinx dir
.DEFAULT:
@echo " SKIP DocBook $@ target (SPHINXDIRS specified)."
else
###
# The build process is as follows (targets):
# (xmldocs) [by docproc]
......@@ -66,6 +72,7 @@ installmandocs: mandocs
# no-op for the DocBook toolchain
epubdocs:
latexdocs:
###
#External programs used
......@@ -221,6 +228,7 @@ silent_gen_xml = :
echo "</programlisting>") > $@
endif # DOCBOOKS=""
endif # SPHINDIR=...
###
# Help targets as used by the top-level makefile
......
......@@ -5,6 +5,9 @@
# You can set these variables from the command line.
SPHINXBUILD = sphinx-build
SPHINXOPTS =
SPHINXDIRS = .
_SPHINXDIRS = $(patsubst $(srctree)/Documentation/%/conf.py,%,$(wildcard $(srctree)/Documentation/*/conf.py))
SPHINX_CONF = conf.py
PAPER =
BUILDDIR = $(obj)/output
......@@ -25,38 +28,62 @@ else ifneq ($(DOCBOOKS),)
else # HAVE_SPHINX
# User-friendly check for rst2pdf
HAVE_RST2PDF := $(shell if python -c "import rst2pdf" >/dev/null 2>&1; then echo 1; else echo 0; fi)
# User-friendly check for pdflatex
HAVE_PDFLATEX := $(shell if which xelatex >/dev/null 2>&1; then echo 1; else echo 0; fi)
# Internal variables.
PAPEROPT_a4 = -D latex_paper_size=a4
PAPEROPT_letter = -D latex_paper_size=letter
KERNELDOC = $(srctree)/scripts/kernel-doc
KERNELDOC_CONF = -D kerneldoc_srctree=$(srctree) -D kerneldoc_bin=$(KERNELDOC)
ALLSPHINXOPTS = -D version=$(KERNELVERSION) -D release=$(KERNELRELEASE) -d $(BUILDDIR)/.doctrees $(KERNELDOC_CONF) $(PAPEROPT_$(PAPER)) -c $(srctree)/$(src) $(SPHINXOPTS) $(srctree)/$(src)
ALLSPHINXOPTS = $(KERNELDOC_CONF) $(PAPEROPT_$(PAPER)) $(SPHINXOPTS)
# the i18n builder cannot share the environment and doctrees with the others
I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
quiet_cmd_sphinx = SPHINX $@
cmd_sphinx = BUILDDIR=$(BUILDDIR) $(SPHINXBUILD) -b $2 $(ALLSPHINXOPTS) $(BUILDDIR)/$2
# commands; the 'cmd' from scripts/Kbuild.include is not *loopable*
loop_cmd = $(echo-cmd) $(cmd_$(1))
# $2 sphinx builder e.g. "html"
# $3 name of the build subfolder / e.g. "media", used as:
# * dest folder relative to $(BUILDDIR) and
# * cache folder relative to $(BUILDDIR)/.doctrees
# $4 dest subfolder e.g. "man" for man pages at media/man
# $5 reST source folder relative to $(srctree)/$(src),
# e.g. "media" for the linux-tv book-set at ./Documentation/media
quiet_cmd_sphinx = SPHINX $@ --> file://$(abspath $(BUILDDIR)/$3/$4);
cmd_sphinx = $(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/media all;\
BUILDDIR=$(abspath $(BUILDDIR)) SPHINX_CONF=$(abspath $(srctree)/$(src)/$5/$(SPHINX_CONF)) \
$(SPHINXBUILD) \
-b $2 \
-c $(abspath $(srctree)/$(src)) \
-d $(abspath $(BUILDDIR)/.doctrees/$3) \
-D version=$(KERNELVERSION) -D release=$(KERNELRELEASE) \
$(ALLSPHINXOPTS) \
$(abspath $(srctree)/$(src)/$5) \
$(abspath $(BUILDDIR)/$3/$4);
htmldocs:
$(MAKE) BUILDDIR=$(BUILDDIR) -f $(srctree)/Documentation/media/Makefile $@
$(call cmd,sphinx,html)
@$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,html,$(var),,$(var)))
pdfdocs:
ifeq ($(HAVE_RST2PDF),0)
$(warning The Python 'rst2pdf' module was not found. Make sure you have the module installed to produce PDF output.)
latexdocs:
ifeq ($(HAVE_PDFLATEX),0)
$(warning The 'xelatex' command was not found. Make sure you have it installed and in PATH to produce PDF output.)
@echo " SKIP Sphinx $@ target."
else # HAVE_RST2PDF
$(call cmd,sphinx,pdf)
endif # HAVE_RST2PDF
else # HAVE_PDFLATEX
@$(call loop_cmd,sphinx,latex,.,latex,.)
endif # HAVE_PDFLATEX
pdfdocs: latexdocs
ifneq ($(HAVE_PDFLATEX),0)
$(Q)$(MAKE) PDFLATEX=xelatex LATEXOPTS="-interaction=nonstopmode" -C $(BUILDDIR)/latex
endif # HAVE_PDFLATEX
epubdocs:
$(call cmd,sphinx,epub)
@$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,epub,$(var),epub,$(var)))
xmldocs:
$(call cmd,sphinx,xml)
@$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,xml,$(var),xml,$(var)))
# no-ops for the Sphinx toolchain
sgmldocs:
......@@ -72,7 +99,14 @@ endif # HAVE_SPHINX
dochelp:
@echo ' Linux kernel internal documentation in different formats (Sphinx):'
@echo ' htmldocs - HTML'
@echo ' latexdocs - LaTeX'
@echo ' pdfdocs - PDF'
@echo ' epubdocs - EPUB'
@echo ' xmldocs - XML'
@echo ' cleandocs - clean all generated files'
@echo
@echo ' make SPHINXDIRS="s1 s2" [target] Generate only docs of folder s1, s2'
@echo ' valid values for SPHINXDIRS are: $(_SPHINXDIRS)'
@echo
@echo ' make SPHINX_CONF={conf-file} [target] use *additional* sphinx-build'
@echo ' configuration. This is e.g. useful to build with nit-picking config.'
......@@ -73,4 +73,13 @@ SunXi family
* Octa ARM Cortex-A7 based SoCs
- Allwinner A83T
+ Datasheet
http://dl.linux-sunxi.org/A83T/A83T_datasheet_Revision_1.1.pdf
https://github.com/allwinner-zh/documents/raw/master/A83T/A83T_Datasheet_v1.3_20150510.pdf
+ User Manual
https://github.com/allwinner-zh/documents/raw/master/A83T/A83T_User_Manual_v1.5.1_20150513.pdf
* Quad ARM Cortex-A53 based SoCs
- Allwinner A64
+ Datasheet
http://dl.linux-sunxi.org/A64/A64_Datasheet_V1.1.pdf
+ User Manual
http://dl.linux-sunxi.org/A64/Allwinner%20A64%20User%20Manual%20v1.0.pdf
......@@ -31,24 +31,25 @@ serve as a convenient shorthand for the implementation of the
hardware-specific bits for the hypothetical "foo" hardware.
Tying the two halves of this interface together is struct clk_hw, which
is defined in struct clk_foo and pointed to within struct clk. This
is defined in struct clk_foo and pointed to within struct clk_core. This
allows for easy navigation between the two discrete halves of the common
clock interface.
Part 2 - common data structures and api
Below is the common struct clk definition from
include/linux/clk-private.h, modified for brevity:
Below is the common struct clk_core definition from
drivers/clk/clk.c, modified for brevity:
struct clk {
struct clk_core {
const char *name;
const struct clk_ops *ops;
struct clk_hw *hw;
char **parent_names;
struct clk **parents;
struct clk *parent;
struct hlist_head children;
struct hlist_node child_node;
struct module *owner;
struct clk_core *parent;
const char **parent_names;
struct clk_core **parents;
u8 num_parents;
u8 new_parent_index;
...
};
......@@ -56,16 +57,19 @@ The members above make up the core of the clk tree topology. The clk
api itself defines several driver-facing functions which operate on
struct clk. That api is documented in include/linux/clk.h.
Platforms and devices utilizing the common struct clk use the struct
clk_ops pointer in struct clk to perform the hardware-specific parts of
the operations defined in clk.h:
Platforms and devices utilizing the common struct clk_core use the struct
clk_ops pointer in struct clk_core to perform the hardware-specific parts of
the operations defined in clk-provider.h:
struct clk_ops {
int (*prepare)(struct clk_hw *hw);
void (*unprepare)(struct clk_hw *hw);
int (*is_prepared)(struct clk_hw *hw);
void (*unprepare_unused)(struct clk_hw *hw);
int (*enable)(struct clk_hw *hw);
void (*disable)(struct clk_hw *hw);
int (*is_enabled)(struct clk_hw *hw);
void (*disable_unused)(struct clk_hw *hw);
unsigned long (*recalc_rate)(struct clk_hw *hw,
unsigned long parent_rate);
long (*round_rate)(struct clk_hw *hw,
......@@ -84,6 +88,8 @@ the operations defined in clk.h:
u8 index);
unsigned long (*recalc_accuracy)(struct clk_hw *hw,
unsigned long parent_accuracy);
int (*get_phase)(struct clk_hw *hw);
int (*set_phase)(struct clk_hw *hw, int degrees);
void (*init)(struct clk_hw *hw);
int (*debug_init)(struct clk_hw *hw,
struct dentry *dentry);
......@@ -91,7 +97,7 @@ the operations defined in clk.h:
Part 3 - hardware clk implementations
The strength of the common struct clk comes from its .ops and .hw pointers
The strength of the common struct clk_core comes from its .ops and .hw pointers
which abstract the details of struct clk from the hardware-specific bits, and
vice versa. To illustrate consider the simple gateable clk implementation in
drivers/clk/clk-gate.c:
......@@ -107,7 +113,7 @@ struct clk_gate contains struct clk_hw hw as well as hardware-specific
knowledge about which register and bit controls this clk's gating.
Nothing about clock topology or accounting, such as enable_count or
notifier_count, is needed here. That is all handled by the common
framework code and struct clk.
framework code and struct clk_core.
Let's walk through enabling this clk from driver code:
......@@ -139,22 +145,18 @@ static void clk_gate_set_bit(struct clk_gate *gate)
Note that to_clk_gate is defined as:
#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, clk)
#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
This pattern of abstraction is used for every clock hardware
representation.
Part 4 - supporting your own clk hardware
When implementing support for a new type of clock it only necessary to
When implementing support for a new type of clock it is only necessary to
include the following header:
#include <linux/clk-provider.h>
include/linux/clk.h is included within that header and clk-private.h
must never be included from the code which implements the operations for
a clock. More on that below in Part 5.
To construct a clk hardware structure for your platform you must define
the following:
......
......@@ -14,11 +14,17 @@
import sys
import os
import sphinx
# Get Sphinx version
major, minor, patch = map(int, sphinx.__version__.split("."))
# If extensions (or modules to document with autodoc) are in another directory,
# add these directories to sys.path here. If the directory is relative to the
# documentation root, use os.path.abspath to make it absolute, like shown here.
sys.path.insert(0, os.path.abspath('sphinx'))
from load_config import loadConfig
# -- General configuration ------------------------------------------------
......@@ -28,14 +34,13 @@ sys.path.insert(0, os.path.abspath('sphinx'))
# Add any Sphinx extension module names here, as strings. They can be
# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
# ones.
extensions = ['kernel-doc', 'rstFlatTable', 'kernel_include']
extensions = ['kernel-doc', 'rstFlatTable', 'kernel_include', 'cdomain']
# Gracefully handle missing rst2pdf.
try:
import rst2pdf
extensions += ['rst2pdf.pdfbuilder']
except ImportError:
pass
# The name of the math extension changed on Sphinx 1.4
if minor > 3:
extensions.append("sphinx.ext.imgmath")
else:
extensions.append("sphinx.ext.pngmath")
# Add any paths that contain templates here, relative to this directory.
templates_path = ['_templates']
......@@ -131,7 +136,7 @@ pygments_style = 'sphinx'
todo_include_todos = False
primary_domain = 'C'
highlight_language = 'C'
highlight_language = 'guess'
# -- Options for HTML output ----------------------------------------------
......@@ -252,23 +257,88 @@ htmlhelp_basename = 'TheLinuxKerneldoc'
latex_elements = {
# The paper size ('letterpaper' or 'a4paper').
#'papersize': 'letterpaper',
'papersize': 'a4paper',
# The font size ('10pt', '11pt' or '12pt').
#'pointsize': '10pt',
# Additional stuff for the LaTeX preamble.
#'preamble': '',
'pointsize': '8pt',
# Latex figure (float) alignment
#'figure_align': 'htbp',
# Don't mangle with UTF-8 chars
'inputenc': '',
'utf8extra': '',
# Additional stuff for the LaTeX preamble.
'preamble': '''
% Adjust margins
\\usepackage[margin=0.5in, top=1in, bottom=1in]{geometry}
% Allow generate some pages in landscape
\\usepackage{lscape}
% Put notes in color and let them be inside a table
\\definecolor{NoteColor}{RGB}{204,255,255}
\\definecolor{WarningColor}{RGB}{255,204,204}
\\definecolor{AttentionColor}{RGB}{255,255,204}
\\definecolor{OtherColor}{RGB}{204,204,204}
\\newlength{\\mynoticelength}
\\makeatletter\\newenvironment{coloredbox}[1]{%
\\setlength{\\fboxrule}{1pt}
\\setlength{\\fboxsep}{7pt}
\\setlength{\\mynoticelength}{\\linewidth}
\\addtolength{\\mynoticelength}{-2\\fboxsep}
\\addtolength{\\mynoticelength}{-2\\fboxrule}
\\begin{lrbox}{\\@tempboxa}\\begin{minipage}{\\mynoticelength}}{\\end{minipage}\\end{lrbox}%
\\ifthenelse%
{\\equal{\\py@noticetype}{note}}%
{\\colorbox{NoteColor}{\\usebox{\\@tempboxa}}}%
{%
\\ifthenelse%
{\\equal{\\py@noticetype}{warning}}%
{\\colorbox{WarningColor}{\\usebox{\\@tempboxa}}}%
{%
\\ifthenelse%
{\\equal{\\py@noticetype}{attention}}%
{\\colorbox{AttentionColor}{\\usebox{\\@tempboxa}}}%
{\\colorbox{OtherColor}{\\usebox{\\@tempboxa}}}%
}%
}%
}\\makeatother
\\makeatletter
\\renewenvironment{notice}[2]{%
\\def\\py@noticetype{#1}
\\begin{coloredbox}{#1}
\\bf\\it
\\par\\strong{#2}
\\csname py@noticestart@#1\\endcsname
}
{
\\csname py@noticeend@\\py@noticetype\\endcsname
\\end{coloredbox}
}
\\makeatother
% Use some font with UTF-8 support with XeLaTeX
\\usepackage{fontspec}
\\setsansfont{DejaVu Serif}
\\setromanfont{DejaVu Sans}
\\setmonofont{DejaVu Sans Mono}
% To allow adjusting table sizes
\\usepackage{adjustbox}
'''
}
# Grouping the document tree into LaTeX files. List of tuples
# (source start file, target name, title,
# author, documentclass [howto, manual, or own class]).
latex_documents = [
(master_doc, 'TheLinuxKernel.tex', 'The Linux Kernel Documentation',
('kernel-documentation', 'kernel-documentation.tex', 'The Linux Kernel Documentation',
'The kernel development community', 'manual'),
('gpu/index', 'gpu.tex', 'Linux GPU Driver Developer\'s Guide',
'The kernel development community', 'manual'),
]
......@@ -419,3 +489,9 @@ pdf_documents = [
# line arguments.
kerneldoc_bin = '../scripts/kernel-doc'
kerneldoc_srctree = '..'
# ------------------------------------------------------------------------------
# Since loadConfig overwrites settings from the global namespace, it has to be
# the last statement in the conf.py file
# ------------------------------------------------------------------------------
loadConfig(globals())
Copyright 2010 Nicolas Palix <npalix@diku.dk>
Copyright 2010 Julia Lawall <julia@diku.dk>
Copyright 2010 Gilles Muller <Gilles.Muller@lip6.fr>
.. Copyright 2010 Nicolas Palix <npalix@diku.dk>
.. Copyright 2010 Julia Lawall <julia@diku.dk>
.. Copyright 2010 Gilles Muller <Gilles.Muller@lip6.fr>
.. highlight:: none
Getting Coccinelle
~~~~~~~~~~~~~~~~~~~~
Coccinelle
==========
Coccinelle is a tool for pattern matching and text transformation that has
many uses in kernel development, including the application of complex,
tree-wide patches and detection of problematic programming patterns.
Getting Coccinelle
-------------------
The semantic patches included in the kernel use features and options
which are provided by Coccinelle version 1.0.0-rc11 and above.
......@@ -22,24 +30,23 @@ of many distributions, e.g. :
- NetBSD
- FreeBSD
You can get the latest version released from the Coccinelle homepage at
http://coccinelle.lip6.fr/
Information and tips about Coccinelle are also provided on the wiki
pages at http://cocci.ekstranet.diku.dk/wiki/doku.php
Once you have it, run the following command:
Once you have it, run the following command::
./configure
make
as a regular user, and install it with
as a regular user, and install it with::
sudo make install
Supplemental documentation
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Supplemental documentation
---------------------------
For supplemental documentation refer to the wiki:
......@@ -47,49 +54,52 @@ https://bottest.wiki.kernel.org/coccicheck
The wiki documentation always refers to the linux-next version of the script.
Using Coccinelle on the Linux kernel
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Using Coccinelle on the Linux kernel
------------------------------------
A Coccinelle-specific target is defined in the top level
Makefile. This target is named 'coccicheck' and calls the 'coccicheck'
front-end in the 'scripts' directory.
Makefile. This target is named ``coccicheck`` and calls the ``coccicheck``
front-end in the ``scripts`` directory.
Four basic modes are defined: patch, report, context, and org. The mode to
use is specified by setting the MODE variable with 'MODE=<mode>'.
Four basic modes are defined: ``patch``, ``report``, ``context``, and
``org``. The mode to use is specified by setting the MODE variable with
``MODE=<mode>``.
'patch' proposes a fix, when possible.
- ``patch`` proposes a fix, when possible.
'report' generates a list in the following format:
- ``report`` generates a list in the following format:
file:line:column-column: message
'context' highlights lines of interest and their context in a
diff-like style.Lines of interest are indicated with '-'.
- ``context`` highlights lines of interest and their context in a
diff-like style.Lines of interest are indicated with ``-``.
'org' generates a report in the Org mode format of Emacs.
- ``org`` generates a report in the Org mode format of Emacs.
Note that not all semantic patches implement all modes. For easy use
of Coccinelle, the default mode is "report".
Two other modes provide some common combinations of these modes.
'chain' tries the previous modes in the order above until one succeeds.
- ``chain`` tries the previous modes in the order above until one succeeds.
- ``rep+ctxt`` runs successively the report mode and the context mode.
It should be used with the C option (described later)
which checks the code on a file basis.
'rep+ctxt' runs successively the report mode and the context mode.
It should be used with the C option (described later)
which checks the code on a file basis.
Examples
~~~~~~~~
Examples:
To make a report for every semantic patch, run the following command:
To make a report for every semantic patch, run the following command::
make coccicheck MODE=report
To produce patches, run:
To produce patches, run::
make coccicheck MODE=patch
The coccicheck target applies every semantic patch available in the
sub-directories of 'scripts/coccinelle' to the entire Linux kernel.
sub-directories of ``scripts/coccinelle`` to the entire Linux kernel.
For each semantic patch, a commit message is proposed. It gives a
description of the problem being checked by the semantic patch, and
......@@ -99,15 +109,15 @@ As any static code analyzer, Coccinelle produces false
positives. Thus, reports must be carefully checked, and patches
reviewed.
To enable verbose messages set the V= variable, for example:
To enable verbose messages set the V= variable, for example::
make coccicheck MODE=report V=1
Coccinelle parallelization
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Coccinelle parallelization
---------------------------
By default, coccicheck tries to run as parallel as possible. To change
the parallelism, set the J= variable. For example, to run across 4 CPUs:
the parallelism, set the J= variable. For example, to run across 4 CPUs::
make coccicheck MODE=report J=4
......@@ -115,44 +125,47 @@ As of Coccinelle 1.0.2 Coccinelle uses Ocaml parmap for parallelization,
if support for this is detected you will benefit from parmap parallelization.
When parmap is enabled coccicheck will enable dynamic load balancing by using
'--chunksize 1' argument, this ensures we keep feeding threads with work
``--chunksize 1`` argument, this ensures we keep feeding threads with work
one by one, so that we avoid the situation where most work gets done by only
a few threads. With dynamic load balancing, if a thread finishes early we keep
feeding it more work.
When parmap is enabled, if an error occurs in Coccinelle, this error
value is propagated back, the return value of the 'make coccicheck'
value is propagated back, the return value of the ``make coccicheck``
captures this return value.
Using Coccinelle with a single semantic patch
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Using Coccinelle with a single semantic patch
---------------------------------------------
The optional make variable COCCI can be used to check a single
semantic patch. In that case, the variable must be initialized with
the name of the semantic patch to apply.
For instance:
For instance::
make coccicheck COCCI=<my_SP.cocci> MODE=patch
or
or::
make coccicheck COCCI=<my_SP.cocci> MODE=report
Controlling Which Files are Processed by Coccinelle
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Controlling Which Files are Processed by Coccinelle
---------------------------------------------------
By default the entire kernel source tree is checked.
To apply Coccinelle to a specific directory, M= can be used.
For example, to check drivers/net/wireless/ one may write:
To apply Coccinelle to a specific directory, ``M=`` can be used.
For example, to check drivers/net/wireless/ one may write::
make coccicheck M=drivers/net/wireless/
To apply Coccinelle on a file basis, instead of a directory basis, the
following command may be used:
following command may be used::
make C=1 CHECK="scripts/coccicheck"
To check only newly edited code, use the value 2 for the C flag, i.e.
To check only newly edited code, use the value 2 for the C flag, i.e.::
make C=2 CHECK="scripts/coccicheck"
......@@ -166,8 +179,8 @@ semantic patch as shown in the previous section.
The "report" mode is the default. You can select another one with the
MODE variable explained above.
Debugging Coccinelle SmPL patches
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Debugging Coccinelle SmPL patches
---------------------------------
Using coccicheck is best as it provides in the spatch command line
include options matching the options used when we compile the kernel.
......@@ -177,8 +190,8 @@ manually run Coccinelle with debug options added.
Alternatively you can debug running Coccinelle against SmPL patches
by asking for stderr to be redirected to stderr, by default stderr
is redirected to /dev/null, if you'd like to capture stderr you
can specify the DEBUG_FILE="file.txt" option to coccicheck. For
instance:
can specify the ``DEBUG_FILE="file.txt"`` option to coccicheck. For
instance::
rm -f cocci.err
make coccicheck COCCI=scripts/coccinelle/free/kfree.cocci MODE=report DEBUG_FILE=cocci.err
......@@ -186,7 +199,7 @@ instance:
You can use SPFLAGS to add debugging flags, for instance you may want to
add both --profile --show-trying to SPFLAGS when debugging. For instance
you may want to use:
you may want to use::
rm -f err.log
export COCCI=scripts/coccinelle/misc/irqf_oneshot.cocci
......@@ -198,24 +211,24 @@ work.
DEBUG_FILE support is only supported when using coccinelle >= 1.2.
.cocciconfig support
~~~~~~~~~~~~~~~~~~~~~~
.cocciconfig support
--------------------
Coccinelle supports reading .cocciconfig for default Coccinelle options that
should be used every time spatch is spawned, the order of precedence for
variables for .cocciconfig is as follows:
o Your current user's home directory is processed first
o Your directory from which spatch is called is processed next
o The directory provided with the --dir option is processed last, if used
- Your current user's home directory is processed first
- Your directory from which spatch is called is processed next
- The directory provided with the --dir option is processed last, if used
Since coccicheck runs through make, it naturally runs from the kernel
proper dir, as such the second rule above would be implied for picking up a
.cocciconfig when using 'make coccicheck'.
.cocciconfig when using ``make coccicheck``.
'make coccicheck' also supports using M= targets.If you do not supply
``make coccicheck`` also supports using M= targets.If you do not supply
any M= target, it is assumed you want to target the entire kernel.
The kernel coccicheck script has:
The kernel coccicheck script has::
if [ "$KBUILD_EXTMOD" = "" ] ; then
OPTIONS="--dir $srctree $COCCIINCLUDE"
......@@ -235,12 +248,12 @@ override any of the kernel's .coccicheck's settings using SPFLAGS.
We help Coccinelle when used against Linux with a set of sensible defaults
options for Linux with our own Linux .cocciconfig. This hints to coccinelle
git can be used for 'git grep' queries over coccigrep. A timeout of 200
git can be used for ``git grep`` queries over coccigrep. A timeout of 200
seconds should suffice for now.
The options picked up by coccinelle when reading a .cocciconfig do not appear
as arguments to spatch processes running on your system, to confirm what
options will be used by Coccinelle run:
options will be used by Coccinelle run::
spatch --print-options-only
......@@ -252,219 +265,227 @@ carries its own .cocciconfig, you will need to use SPFLAGS to use idutils if
desired. See below section "Additional flags" for more details on how to use
idutils.
Additional flags
~~~~~~~~~~~~~~~~~~
Additional flags
----------------
Additional flags can be passed to spatch through the SPFLAGS
variable. This works as Coccinelle respects the last flags
given to it when options are in conflict.
given to it when options are in conflict. ::
make SPFLAGS=--use-glimpse coccicheck
Coccinelle supports idutils as well but requires coccinelle >= 1.0.6.
When no ID file is specified coccinelle assumes your ID database file
is in the file .id-utils.index on the top level of the kernel, coccinelle
carries a script scripts/idutils_index.sh which creates the database with
carries a script scripts/idutils_index.sh which creates the database with::
mkid -i C --output .id-utils.index
If you have another database filename you can also just symlink with this
name.
name. ::
make SPFLAGS=--use-idutils coccicheck
Alternatively you can specify the database filename explicitly, for
instance:
instance::
make SPFLAGS="--use-idutils /full-path/to/ID" coccicheck
See spatch --help to learn more about spatch options.
See ``spatch --help`` to learn more about spatch options.
Note that the '--use-glimpse' and '--use-idutils' options
Note that the ``--use-glimpse`` and ``--use-idutils`` options
require external tools for indexing the code. None of them is
thus active by default. However, by indexing the code with
one of these tools, and according to the cocci file used,
spatch could proceed the entire code base more quickly.
SmPL patch specific options
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SmPL patch specific options
---------------------------
SmPL patches can have their own requirements for options passed
to Coccinelle. SmPL patch specific options can be provided by
providing them at the top of the SmPL patch, for instance:
providing them at the top of the SmPL patch, for instance::
// Options: --no-includes --include-headers
// Options: --no-includes --include-headers
SmPL patch Coccinelle requirements
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SmPL patch Coccinelle requirements
----------------------------------
As Coccinelle features get added some more advanced SmPL patches
may require newer versions of Coccinelle. If an SmPL patch requires
at least a version of Coccinelle, this can be specified as follows,
as an example if requiring at least Coccinelle >= 1.0.5:
as an example if requiring at least Coccinelle >= 1.0.5::
// Requires: 1.0.5
// Requires: 1.0.5
Proposing new semantic patches
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Proposing new semantic patches
-------------------------------
New semantic patches can be proposed and submitted by kernel
developers. For sake of clarity, they should be organized in the
sub-directories of 'scripts/coccinelle/'.
sub-directories of ``scripts/coccinelle/``.
Detailed description of the 'report' mode
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Detailed description of the ``report`` mode
-------------------------------------------
``report`` generates a list in the following format::
'report' generates a list in the following format:
file:line:column-column: message
Example:
Example
~~~~~~~
Running
Running::
make coccicheck MODE=report COCCI=scripts/coccinelle/api/err_cast.cocci
will execute the following part of the SmPL script.
will execute the following part of the SmPL script::
<smpl>
@r depends on !context && !patch && (org || report)@
expression x;
position p;
@@
<smpl>
@r depends on !context && !patch && (org || report)@
expression x;
position p;
@@
ERR_PTR@p(PTR_ERR(x))
ERR_PTR@p(PTR_ERR(x))
@script:python depends on report@
p << r.p;
x << r.x;
@@
@script:python depends on report@
p << r.p;
x << r.x;
@@
msg="ERR_CAST can be used with %s" % (x)
coccilib.report.print_report(p[0], msg)
</smpl>
msg="ERR_CAST can be used with %s" % (x)
coccilib.report.print_report(p[0], msg)
</smpl>
This SmPL excerpt generates entries on the standard output, as
illustrated below:
illustrated below::
/home/user/linux/crypto/ctr.c:188:9-16: ERR_CAST can be used with alg
/home/user/linux/crypto/authenc.c:619:9-16: ERR_CAST can be used with auth
/home/user/linux/crypto/xts.c:227:9-16: ERR_CAST can be used with alg
/home/user/linux/crypto/ctr.c:188:9-16: ERR_CAST can be used with alg
/home/user/linux/crypto/authenc.c:619:9-16: ERR_CAST can be used with auth
/home/user/linux/crypto/xts.c:227:9-16: ERR_CAST can be used with alg
Detailed description of the 'patch' mode
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Detailed description of the ``patch`` mode
------------------------------------------
When the 'patch' mode is available, it proposes a fix for each problem
When the ``patch`` mode is available, it proposes a fix for each problem
identified.
Example:
Example
~~~~~~~
Running::
Running
make coccicheck MODE=patch COCCI=scripts/coccinelle/api/err_cast.cocci
will execute the following part of the SmPL script.
will execute the following part of the SmPL script::
<smpl>
@ depends on !context && patch && !org && !report @
expression x;
@@
<smpl>
@ depends on !context && patch && !org && !report @
expression x;
@@
- ERR_PTR(PTR_ERR(x))
+ ERR_CAST(x)
</smpl>
- ERR_PTR(PTR_ERR(x))
+ ERR_CAST(x)
</smpl>
This SmPL excerpt generates patch hunks on the standard output, as
illustrated below:
illustrated below::
diff -u -p a/crypto/ctr.c b/crypto/ctr.c
--- a/crypto/ctr.c 2010-05-26 10:49:38.000000000 +0200
+++ b/crypto/ctr.c 2010-06-03 23:44:49.000000000 +0200
@@ -185,7 +185,7 @@ static struct crypto_instance *crypto_ct
diff -u -p a/crypto/ctr.c b/crypto/ctr.c
--- a/crypto/ctr.c 2010-05-26 10:49:38.000000000 +0200
+++ b/crypto/ctr.c 2010-06-03 23:44:49.000000000 +0200
@@ -185,7 +185,7 @@ static struct crypto_instance *crypto_ct
alg = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_CIPHER,
CRYPTO_ALG_TYPE_MASK);
if (IS_ERR(alg))
- return ERR_PTR(PTR_ERR(alg));
+ return ERR_CAST(alg);
- return ERR_PTR(PTR_ERR(alg));
+ return ERR_CAST(alg);
/* Block size must be >= 4 bytes. */
err = -EINVAL;
Detailed description of the 'context' mode
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Detailed description of the ``context`` mode
--------------------------------------------
'context' highlights lines of interest and their context
``context`` highlights lines of interest and their context
in a diff-like style.
NOTE: The diff-like output generated is NOT an applicable patch. The
intent of the 'context' mode is to highlight the important lines
(annotated with minus, '-') and gives some surrounding context
**NOTE**: The diff-like output generated is NOT an applicable patch. The
intent of the ``context`` mode is to highlight the important lines
(annotated with minus, ``-``) and gives some surrounding context
lines around. This output can be used with the diff mode of
Emacs to review the code.
Example:
Example
~~~~~~~
Running::
Running
make coccicheck MODE=context COCCI=scripts/coccinelle/api/err_cast.cocci
will execute the following part of the SmPL script.
will execute the following part of the SmPL script::
<smpl>
@ depends on context && !patch && !org && !report@
expression x;
@@
<smpl>
@ depends on context && !patch && !org && !report@
expression x;
@@
* ERR_PTR(PTR_ERR(x))
</smpl>
* ERR_PTR(PTR_ERR(x))
</smpl>
This SmPL excerpt generates diff hunks on the standard output, as
illustrated below:
illustrated below::
diff -u -p /home/user/linux/crypto/ctr.c /tmp/nothing
--- /home/user/linux/crypto/ctr.c 2010-05-26 10:49:38.000000000 +0200
+++ /tmp/nothing
@@ -185,7 +185,6 @@ static struct crypto_instance *crypto_ct
diff -u -p /home/user/linux/crypto/ctr.c /tmp/nothing
--- /home/user/linux/crypto/ctr.c 2010-05-26 10:49:38.000000000 +0200
+++ /tmp/nothing
@@ -185,7 +185,6 @@ static struct crypto_instance *crypto_ct
alg = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_CIPHER,
CRYPTO_ALG_TYPE_MASK);
if (IS_ERR(alg))
- return ERR_PTR(PTR_ERR(alg));
- return ERR_PTR(PTR_ERR(alg));
/* Block size must be >= 4 bytes. */
err = -EINVAL;
Detailed description of the 'org' mode
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Detailed description of the ``org`` mode
----------------------------------------
``org`` generates a report in the Org mode format of Emacs.
'org' generates a report in the Org mode format of Emacs.
Example
~~~~~~~
Example:
Running::
Running
make coccicheck MODE=org COCCI=scripts/coccinelle/api/err_cast.cocci
will execute the following part of the SmPL script.
will execute the following part of the SmPL script::
<smpl>
@r depends on !context && !patch && (org || report)@
expression x;
position p;
@@
<smpl>
@r depends on !context && !patch && (org || report)@
expression x;
position p;
@@
ERR_PTR@p(PTR_ERR(x))
ERR_PTR@p(PTR_ERR(x))
@script:python depends on org@
p << r.p;
x << r.x;
@@
@script:python depends on org@
p << r.p;
x << r.x;
@@
msg="ERR_CAST can be used with %s" % (x)
msg_safe=msg.replace("[","@(").replace("]",")")
coccilib.org.print_todo(p[0], msg_safe)
</smpl>
msg="ERR_CAST can be used with %s" % (x)
msg_safe=msg.replace("[","@(").replace("]",")")
coccilib.org.print_todo(p[0], msg_safe)
</smpl>
This SmPL excerpt generates Org entries on the standard output, as
illustrated below:
illustrated below::
* TODO [[view:/home/user/linux/crypto/ctr.c::face=ovl-face1::linb=188::colb=9::cole=16][ERR_CAST can be used with alg]]
* TODO [[view:/home/user/linux/crypto/authenc.c::face=ovl-face1::linb=619::colb=9::cole=16][ERR_CAST can be used with auth]]
* TODO [[view:/home/user/linux/crypto/xts.c::face=ovl-face1::linb=227::colb=9::cole=16][ERR_CAST can be used with alg]]
* TODO [[view:/home/user/linux/crypto/ctr.c::face=ovl-face1::linb=188::colb=9::cole=16][ERR_CAST can be used with alg]]
* TODO [[view:/home/user/linux/crypto/authenc.c::face=ovl-face1::linb=619::colb=9::cole=16][ERR_CAST can be used with auth]]
* TODO [[view:/home/user/linux/crypto/xts.c::face=ovl-face1::linb=227::colb=9::cole=16][ERR_CAST can be used with alg]]
Using gcov with the Linux kernel
================================
1. Introduction
2. Preparation
3. Customization
4. Files
5. Modules
6. Separated build and test machines
7. Troubleshooting
Appendix A: sample script: gather_on_build.sh
Appendix B: sample script: gather_on_test.sh
1. Introduction
===============
gcov profiling kernel support enables the use of GCC's coverage testing
tool gcov [1] with the Linux kernel. Coverage data of a running kernel
tool gcov_ with the Linux kernel. Coverage data of a running kernel
is exported in gcov-compatible format via the "gcov" debugfs directory.
To get coverage data for a specific file, change to the kernel build
directory and use gcov with the -o option as follows (requires root):
directory and use gcov with the ``-o`` option as follows (requires root)::
# cd /tmp/linux-out
# gcov -o /sys/kernel/debug/gcov/tmp/linux-out/kernel spinlock.c
# cd /tmp/linux-out
# gcov -o /sys/kernel/debug/gcov/tmp/linux-out/kernel spinlock.c
This will create source code files annotated with execution counts
in the current directory. In addition, graphical gcov front-ends such
as lcov [2] can be used to automate the process of collecting data
as lcov_ can be used to automate the process of collecting data
for the entire kernel and provide coverage overviews in HTML format.
Possible uses:
......@@ -36,25 +22,23 @@ Possible uses:
* minimizing kernel configurations (do I need this option if the
associated code is never run?)
--
[1] http://gcc.gnu.org/onlinedocs/gcc/Gcov.html
[2] http://ltp.sourceforge.net/coverage/lcov.php
.. _gcov: http://gcc.gnu.org/onlinedocs/gcc/Gcov.html
.. _lcov: http://ltp.sourceforge.net/coverage/lcov.php
2. Preparation
==============
Preparation
-----------
Configure the kernel with:
Configure the kernel with::
CONFIG_DEBUG_FS=y
CONFIG_GCOV_KERNEL=y
select the gcc's gcov format, default is autodetect based on gcc version:
select the gcc's gcov format, default is autodetect based on gcc version::
CONFIG_GCOV_FORMAT_AUTODETECT=y
and to get coverage data for the entire kernel:
and to get coverage data for the entire kernel::
CONFIG_GCOV_PROFILE_ALL=y
......@@ -63,58 +47,62 @@ larger and run slower. Also CONFIG_GCOV_PROFILE_ALL may not be supported
on all architectures.
Profiling data will only become accessible once debugfs has been
mounted:
mounted::
mount -t debugfs none /sys/kernel/debug
3. Customization
================
Customization
-------------
To enable profiling for specific files or directories, add a line
similar to the following to the respective kernel Makefile:
For a single file (e.g. main.o):
GCOV_PROFILE_main.o := y
- For a single file (e.g. main.o)::
For all files in one directory:
GCOV_PROFILE := y
GCOV_PROFILE_main.o := y
- For all files in one directory::
GCOV_PROFILE := y
To exclude files from being profiled even when CONFIG_GCOV_PROFILE_ALL
is specified, use:
is specified, use::
GCOV_PROFILE_main.o := n
GCOV_PROFILE_main.o := n
and:
GCOV_PROFILE := n
and::
GCOV_PROFILE := n
Only files which are linked to the main kernel image or are compiled as
kernel modules are supported by this mechanism.
4. Files
========
Files
-----
The gcov kernel support creates the following files in debugfs:
/sys/kernel/debug/gcov
Parent directory for all gcov-related files.
``/sys/kernel/debug/gcov``
Parent directory for all gcov-related files.
/sys/kernel/debug/gcov/reset
Global reset file: resets all coverage data to zero when
written to.
``/sys/kernel/debug/gcov/reset``
Global reset file: resets all coverage data to zero when
written to.
/sys/kernel/debug/gcov/path/to/compile/dir/file.gcda
The actual gcov data file as understood by the gcov
tool. Resets file coverage data to zero when written to.
``/sys/kernel/debug/gcov/path/to/compile/dir/file.gcda``
The actual gcov data file as understood by the gcov
tool. Resets file coverage data to zero when written to.
/sys/kernel/debug/gcov/path/to/compile/dir/file.gcno
Symbolic link to a static data file required by the gcov
tool. This file is generated by gcc when compiling with
option -ftest-coverage.
``/sys/kernel/debug/gcov/path/to/compile/dir/file.gcno``
Symbolic link to a static data file required by the gcov
tool. This file is generated by gcc when compiling with
option ``-ftest-coverage``.
5. Modules
==========
Modules
-------
Kernel modules may contain cleanup code which is only run during
module unload time. The gcov mechanism provides a means to collect
......@@ -124,7 +112,7 @@ Once the module is loaded again, the associated coverage counters are
initialized with the data from its previous instantiation.
This behavior can be deactivated by specifying the gcov_persist kernel
parameter:
parameter::
gcov_persist=0
......@@ -132,8 +120,8 @@ At run-time, a user can also choose to discard data for an unloaded
module by writing to its data file or the global reset file.
6. Separated build and test machines
====================================
Separated build and test machines
---------------------------------
The gcov kernel profiling infrastructure is designed to work out-of-the
box for setups where kernels are built and run on the same machine. In
......@@ -142,116 +130,127 @@ must be made, depending on where the gcov tool is used:
a) gcov is run on the TEST machine
The gcov tool version on the test machine must be compatible with the
gcc version used for kernel build. Also the following files need to be
copied from build to test machine:
The gcov tool version on the test machine must be compatible with the
gcc version used for kernel build. Also the following files need to be
copied from build to test machine:
from the source tree:
- all C source files + headers
from the source tree:
- all C source files + headers
from the build tree:
- all C source files + headers
- all .gcda and .gcno files
- all links to directories
from the build tree:
- all C source files + headers
- all .gcda and .gcno files
- all links to directories
It is important to note that these files need to be placed into the
exact same file system location on the test machine as on the build
machine. If any of the path components is symbolic link, the actual
directory needs to be used instead (due to make's CURDIR handling).
It is important to note that these files need to be placed into the
exact same file system location on the test machine as on the build
machine. If any of the path components is symbolic link, the actual
directory needs to be used instead (due to make's CURDIR handling).
b) gcov is run on the BUILD machine
The following files need to be copied after each test case from test
to build machine:
The following files need to be copied after each test case from test
to build machine:
from the gcov directory in sysfs:
- all .gcda files
- all links to .gcno files
These files can be copied to any location on the build machine. gcov
must then be called with the -o option pointing to that directory.
from the gcov directory in sysfs:
- all .gcda files
- all links to .gcno files
Example directory setup on the build machine::
These files can be copied to any location on the build machine. gcov
must then be called with the -o option pointing to that directory.
/tmp/linux: kernel source tree
/tmp/out: kernel build directory as specified by make O=
/tmp/coverage: location of the files copied from the test machine
Example directory setup on the build machine:
[user@build] cd /tmp/out
[user@build] gcov -o /tmp/coverage/tmp/out/init main.c
/tmp/linux: kernel source tree
/tmp/out: kernel build directory as specified by make O=
/tmp/coverage: location of the files copied from the test machine
[user@build] cd /tmp/out
[user@build] gcov -o /tmp/coverage/tmp/out/init main.c
Troubleshooting
---------------
Problem
Compilation aborts during linker step.
7. Troubleshooting
==================
Cause
Profiling flags are specified for source files which are not
linked to the main kernel or which are linked by a custom
linker procedure.
Problem: Compilation aborts during linker step.
Cause: Profiling flags are specified for source files which are not
linked to the main kernel or which are linked by a custom
linker procedure.
Solution: Exclude affected source files from profiling by specifying
GCOV_PROFILE := n or GCOV_PROFILE_basename.o := n in the
corresponding Makefile.
Solution
Exclude affected source files from profiling by specifying
``GCOV_PROFILE := n`` or ``GCOV_PROFILE_basename.o := n`` in the
corresponding Makefile.
Problem: Files copied from sysfs appear empty or incomplete.
Cause: Due to the way seq_file works, some tools such as cp or tar
may not correctly copy files from sysfs.
Solution: Use 'cat' to read .gcda files and 'cp -d' to copy links.
Alternatively use the mechanism shown in Appendix B.
Problem
Files copied from sysfs appear empty or incomplete.
Cause
Due to the way seq_file works, some tools such as cp or tar
may not correctly copy files from sysfs.
Solution
Use ``cat``' to read ``.gcda`` files and ``cp -d`` to copy links.
Alternatively use the mechanism shown in Appendix B.
Appendix A: gather_on_build.sh
==============================
------------------------------
Sample script to gather coverage meta files on the build machine
(see 6a):
#!/bin/bash
(see 6a)::
#!/bin/bash
KSRC=$1
KOBJ=$2
DEST=$3
KSRC=$1
KOBJ=$2
DEST=$3
if [ -z "$KSRC" ] || [ -z "$KOBJ" ] || [ -z "$DEST" ]; then
echo "Usage: $0 <ksrc directory> <kobj directory> <output.tar.gz>" >&2
exit 1
fi
if [ -z "$KSRC" ] || [ -z "$KOBJ" ] || [ -z "$DEST" ]; then
echo "Usage: $0 <ksrc directory> <kobj directory> <output.tar.gz>" >&2
exit 1
fi
KSRC=$(cd $KSRC; printf "all:\n\t@echo \${CURDIR}\n" | make -f -)
KOBJ=$(cd $KOBJ; printf "all:\n\t@echo \${CURDIR}\n" | make -f -)
KSRC=$(cd $KSRC; printf "all:\n\t@echo \${CURDIR}\n" | make -f -)
KOBJ=$(cd $KOBJ; printf "all:\n\t@echo \${CURDIR}\n" | make -f -)
find $KSRC $KOBJ \( -name '*.gcno' -o -name '*.[ch]' -o -type l \) -a \
-perm /u+r,g+r | tar cfz $DEST -P -T -
find $KSRC $KOBJ \( -name '*.gcno' -o -name '*.[ch]' -o -type l \) -a \
-perm /u+r,g+r | tar cfz $DEST -P -T -
if [ $? -eq 0 ] ; then
echo "$DEST successfully created, copy to test system and unpack with:"
echo " tar xfz $DEST -P"
else
echo "Could not create file $DEST"
fi
if [ $? -eq 0 ] ; then
echo "$DEST successfully created, copy to test system and unpack with:"
echo " tar xfz $DEST -P"
else
echo "Could not create file $DEST"
fi
Appendix B: gather_on_test.sh
=============================
-----------------------------
Sample script to gather coverage data files on the test machine
(see 6b):
(see 6b)::
#!/bin/bash -e
#!/bin/bash -e
DEST=$1
GCDA=/sys/kernel/debug/gcov
DEST=$1
GCDA=/sys/kernel/debug/gcov
if [ -z "$DEST" ] ; then
echo "Usage: $0 <output.tar.gz>" >&2
exit 1
fi
if [ -z "$DEST" ] ; then
echo "Usage: $0 <output.tar.gz>" >&2
exit 1
fi
TEMPDIR=$(mktemp -d)
echo Collecting data..
find $GCDA -type d -exec mkdir -p $TEMPDIR/\{\} \;
find $GCDA -name '*.gcda' -exec sh -c 'cat < $0 > '$TEMPDIR'/$0' {} \;
find $GCDA -name '*.gcno' -exec sh -c 'cp -d $0 '$TEMPDIR'/$0' {} \;
tar czf $DEST -C $TEMPDIR sys
rm -rf $TEMPDIR
TEMPDIR=$(mktemp -d)
echo Collecting data..
find $GCDA -type d -exec mkdir -p $TEMPDIR/\{\} \;
find $GCDA -name '*.gcda' -exec sh -c 'cat < $0 > '$TEMPDIR'/$0' {} \;
find $GCDA -name '*.gcno' -exec sh -c 'cp -d $0 '$TEMPDIR'/$0' {} \;
tar czf $DEST -C $TEMPDIR sys
rm -rf $TEMPDIR
echo "$DEST successfully created, copy to build system and unpack with:"
echo " tar xfz $DEST"
echo "$DEST successfully created, copy to build system and unpack with:"
echo " tar xfz $DEST"
.. highlight:: none
Debugging kernel and modules via gdb
====================================
......@@ -13,54 +15,58 @@ be transferred to the other gdb stubs as well.
Requirements
------------
o gdb 7.2+ (recommended: 7.4+) with python support enabled (typically true
for distributions)
- gdb 7.2+ (recommended: 7.4+) with python support enabled (typically true
for distributions)
Setup
-----
o Create a virtual Linux machine for QEMU/KVM (see www.linux-kvm.org and
www.qemu.org for more details). For cross-development,
http://landley.net/aboriginal/bin keeps a pool of machine images and
toolchains that can be helpful to start from.
- Create a virtual Linux machine for QEMU/KVM (see www.linux-kvm.org and
www.qemu.org for more details). For cross-development,
http://landley.net/aboriginal/bin keeps a pool of machine images and
toolchains that can be helpful to start from.
o Build the kernel with CONFIG_GDB_SCRIPTS enabled, but leave
CONFIG_DEBUG_INFO_REDUCED off. If your architecture supports
CONFIG_FRAME_POINTER, keep it enabled.
- Build the kernel with CONFIG_GDB_SCRIPTS enabled, but leave
CONFIG_DEBUG_INFO_REDUCED off. If your architecture supports
CONFIG_FRAME_POINTER, keep it enabled.
o Install that kernel on the guest.
- Install that kernel on the guest.
Alternatively, QEMU allows to boot the kernel directly using -kernel,
-append, -initrd command line switches. This is generally only useful if
you do not depend on modules. See QEMU documentation for more details on
this mode.
Alternatively, QEMU allows to boot the kernel directly using -kernel,
-append, -initrd command line switches. This is generally only useful if
you do not depend on modules. See QEMU documentation for more details on
this mode.
- Enable the gdb stub of QEMU/KVM, either
o Enable the gdb stub of QEMU/KVM, either
- at VM startup time by appending "-s" to the QEMU command line
or
or
- during runtime by issuing "gdbserver" from the QEMU monitor
console
o cd /path/to/linux-build
- cd /path/to/linux-build
o Start gdb: gdb vmlinux
- Start gdb: gdb vmlinux
Note: Some distros may restrict auto-loading of gdb scripts to known safe
directories. In case gdb reports to refuse loading vmlinux-gdb.py, add
Note: Some distros may restrict auto-loading of gdb scripts to known safe
directories. In case gdb reports to refuse loading vmlinux-gdb.py, add::
add-auto-load-safe-path /path/to/linux-build
to ~/.gdbinit. See gdb help for more details.
to ~/.gdbinit. See gdb help for more details.
- Attach to the booted guest::
o Attach to the booted guest:
(gdb) target remote :1234
Examples of using the Linux-provided gdb helpers
------------------------------------------------
o Load module (and main kernel) symbols:
- Load module (and main kernel) symbols::
(gdb) lx-symbols
loading vmlinux
scanning for modules in /home/user/linux/build
......@@ -72,17 +78,20 @@ Examples of using the Linux-provided gdb helpers
...
loading @0xffffffffa0000000: /home/user/linux/build/drivers/ata/ata_generic.ko
o Set a breakpoint on some not yet loaded module function, e.g.:
- Set a breakpoint on some not yet loaded module function, e.g.::
(gdb) b btrfs_init_sysfs
Function "btrfs_init_sysfs" not defined.
Make breakpoint pending on future shared library load? (y or [n]) y
Breakpoint 1 (btrfs_init_sysfs) pending.
o Continue the target
- Continue the target::
(gdb) c
o Load the module on the target and watch the symbols being loaded as well as
the breakpoint hit:
- Load the module on the target and watch the symbols being loaded as well as
the breakpoint hit::
loading @0xffffffffa0034000: /home/user/linux/build/lib/libcrc32c.ko
loading @0xffffffffa0050000: /home/user/linux/build/lib/lzo/lzo_compress.ko
loading @0xffffffffa006e000: /home/user/linux/build/lib/zlib_deflate/zlib_deflate.ko
......@@ -91,7 +100,8 @@ Examples of using the Linux-provided gdb helpers
Breakpoint 1, btrfs_init_sysfs () at /home/user/linux/fs/btrfs/sysfs.c:36
36 btrfs_kset = kset_create_and_add("btrfs", NULL, fs_kobj);
o Dump the log buffer of the target kernel:
- Dump the log buffer of the target kernel::
(gdb) lx-dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
......@@ -102,19 +112,22 @@ Examples of using the Linux-provided gdb helpers
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
....
o Examine fields of the current task struct:
- Examine fields of the current task struct::
(gdb) p $lx_current().pid
$1 = 4998
(gdb) p $lx_current().comm
$2 = "modprobe\000\000\000\000\000\000\000"
o Make use of the per-cpu function for the current or a specified CPU:
- Make use of the per-cpu function for the current or a specified CPU::
(gdb) p $lx_per_cpu("runqueues").nr_running
$3 = 1
(gdb) p $lx_per_cpu("runqueues", 2).nr_running
$4 = 0
o Dig into hrtimers using the container_of helper:
- Dig into hrtimers using the container_of helper::
(gdb) set $next = $lx_per_cpu("hrtimer_bases").clock_base[0].active.next
(gdb) p *$container_of($next, "struct hrtimer", "node")
$5 = {
......@@ -144,7 +157,7 @@ List of commands and functions
------------------------------
The number of commands and convenience functions may evolve over the time,
this is just a snapshot of the initial version:
this is just a snapshot of the initial version::
(gdb) apropos lx
function lx_current -- Return current task
......
KernelAddressSanitizer (KASAN)
==============================
The Kernel Address Sanitizer (KASAN)
====================================
0. Overview
===========
Overview
--------
KernelAddressSANitizer (KASAN) is a dynamic memory error detector. It provides
a fast and comprehensive solution for finding use-after-free and out-of-bounds
......@@ -12,12 +12,12 @@ KASAN uses compile-time instrumentation for checking every memory access,
therefore you will need a GCC version 4.9.2 or later. GCC 5.0 or later is
required for detection of out-of-bounds accesses to stack or global variables.
Currently KASAN is supported only for x86_64 architecture.
Currently KASAN is supported only for the x86_64 and arm64 architectures.
1. Usage
========
Usage
-----
To enable KASAN configure kernel with:
To enable KASAN configure kernel with::
CONFIG_KASAN = y
......@@ -32,89 +32,91 @@ For better bug detection and nicer reporting, enable CONFIG_STACKTRACE.
To disable instrumentation for specific files or directories, add a line
similar to the following to the respective kernel Makefile:
For a single file (e.g. main.o):
KASAN_SANITIZE_main.o := n
For all files in one directory:
KASAN_SANITIZE := n
1.1 Error reports
=================
A typical out of bounds access report looks like this:
==================================================================
BUG: AddressSanitizer: out of bounds access in kmalloc_oob_right+0x65/0x75 [test_kasan] at addr ffff8800693bc5d3
Write of size 1 by task modprobe/1689
=============================================================================
BUG kmalloc-128 (Not tainted): kasan error
-----------------------------------------------------------------------------
Disabling lock debugging due to kernel taint
INFO: Allocated in kmalloc_oob_right+0x3d/0x75 [test_kasan] age=0 cpu=0 pid=1689
__slab_alloc+0x4b4/0x4f0
kmem_cache_alloc_trace+0x10b/0x190
kmalloc_oob_right+0x3d/0x75 [test_kasan]
init_module+0x9/0x47 [test_kasan]
do_one_initcall+0x99/0x200
load_module+0x2cb3/0x3b20
SyS_finit_module+0x76/0x80
system_call_fastpath+0x12/0x17
INFO: Slab 0xffffea0001a4ef00 objects=17 used=7 fp=0xffff8800693bd728 flags=0x100000000004080
INFO: Object 0xffff8800693bc558 @offset=1368 fp=0xffff8800693bc720
Bytes b4 ffff8800693bc548: 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ
Object ffff8800693bc558: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
Object ffff8800693bc568: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
Object ffff8800693bc578: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
Object ffff8800693bc588: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
Object ffff8800693bc598: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
Object ffff8800693bc5a8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
Object ffff8800693bc5b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
Object ffff8800693bc5c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk.
Redzone ffff8800693bc5d8: cc cc cc cc cc cc cc cc ........
Padding ffff8800693bc718: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ
CPU: 0 PID: 1689 Comm: modprobe Tainted: G B 3.18.0-rc1-mm1+ #98
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
ffff8800693bc000 0000000000000000 ffff8800693bc558 ffff88006923bb78
ffffffff81cc68ae 00000000000000f3 ffff88006d407600 ffff88006923bba8
ffffffff811fd848 ffff88006d407600 ffffea0001a4ef00 ffff8800693bc558
Call Trace:
[<ffffffff81cc68ae>] dump_stack+0x46/0x58
[<ffffffff811fd848>] print_trailer+0xf8/0x160
[<ffffffffa00026a7>] ? kmem_cache_oob+0xc3/0xc3 [test_kasan]
[<ffffffff811ff0f5>] object_err+0x35/0x40
[<ffffffffa0002065>] ? kmalloc_oob_right+0x65/0x75 [test_kasan]
[<ffffffff8120b9fa>] kasan_report_error+0x38a/0x3f0
[<ffffffff8120a79f>] ? kasan_poison_shadow+0x2f/0x40
[<ffffffff8120b344>] ? kasan_unpoison_shadow+0x14/0x40
[<ffffffff8120a79f>] ? kasan_poison_shadow+0x2f/0x40
[<ffffffffa00026a7>] ? kmem_cache_oob+0xc3/0xc3 [test_kasan]
[<ffffffff8120a995>] __asan_store1+0x75/0xb0
[<ffffffffa0002601>] ? kmem_cache_oob+0x1d/0xc3 [test_kasan]
[<ffffffffa0002065>] ? kmalloc_oob_right+0x65/0x75 [test_kasan]
[<ffffffffa0002065>] kmalloc_oob_right+0x65/0x75 [test_kasan]
[<ffffffffa00026b0>] init_module+0x9/0x47 [test_kasan]
[<ffffffff810002d9>] do_one_initcall+0x99/0x200
[<ffffffff811e4e5c>] ? __vunmap+0xec/0x160
[<ffffffff81114f63>] load_module+0x2cb3/0x3b20
[<ffffffff8110fd70>] ? m_show+0x240/0x240
[<ffffffff81115f06>] SyS_finit_module+0x76/0x80
[<ffffffff81cd3129>] system_call_fastpath+0x12/0x17
Memory state around the buggy address:
ffff8800693bc300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8800693bc380: fc fc 00 00 00 00 00 00 00 00 00 00 00 00 00 fc
ffff8800693bc400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8800693bc480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8800693bc500: fc fc fc fc fc fc fc fc fc fc fc 00 00 00 00 00
>ffff8800693bc580: 00 00 00 00 00 00 00 00 00 00 03 fc fc fc fc fc
- For a single file (e.g. main.o)::
KASAN_SANITIZE_main.o := n
- For all files in one directory::
KASAN_SANITIZE := n
Error reports
~~~~~~~~~~~~~
A typical out of bounds access report looks like this::
==================================================================
BUG: AddressSanitizer: out of bounds access in kmalloc_oob_right+0x65/0x75 [test_kasan] at addr ffff8800693bc5d3
Write of size 1 by task modprobe/1689
=============================================================================
BUG kmalloc-128 (Not tainted): kasan error
-----------------------------------------------------------------------------
Disabling lock debugging due to kernel taint
INFO: Allocated in kmalloc_oob_right+0x3d/0x75 [test_kasan] age=0 cpu=0 pid=1689
__slab_alloc+0x4b4/0x4f0
kmem_cache_alloc_trace+0x10b/0x190
kmalloc_oob_right+0x3d/0x75 [test_kasan]
init_module+0x9/0x47 [test_kasan]
do_one_initcall+0x99/0x200
load_module+0x2cb3/0x3b20
SyS_finit_module+0x76/0x80
system_call_fastpath+0x12/0x17
INFO: Slab 0xffffea0001a4ef00 objects=17 used=7 fp=0xffff8800693bd728 flags=0x100000000004080
INFO: Object 0xffff8800693bc558 @offset=1368 fp=0xffff8800693bc720
Bytes b4 ffff8800693bc548: 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ
Object ffff8800693bc558: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
Object ffff8800693bc568: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
Object ffff8800693bc578: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
Object ffff8800693bc588: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
Object ffff8800693bc598: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
Object ffff8800693bc5a8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
Object ffff8800693bc5b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
Object ffff8800693bc5c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk.
Redzone ffff8800693bc5d8: cc cc cc cc cc cc cc cc ........
Padding ffff8800693bc718: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ
CPU: 0 PID: 1689 Comm: modprobe Tainted: G B 3.18.0-rc1-mm1+ #98
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
ffff8800693bc000 0000000000000000 ffff8800693bc558 ffff88006923bb78
ffffffff81cc68ae 00000000000000f3 ffff88006d407600 ffff88006923bba8
ffffffff811fd848 ffff88006d407600 ffffea0001a4ef00 ffff8800693bc558
Call Trace:
[<ffffffff81cc68ae>] dump_stack+0x46/0x58
[<ffffffff811fd848>] print_trailer+0xf8/0x160
[<ffffffffa00026a7>] ? kmem_cache_oob+0xc3/0xc3 [test_kasan]
[<ffffffff811ff0f5>] object_err+0x35/0x40
[<ffffffffa0002065>] ? kmalloc_oob_right+0x65/0x75 [test_kasan]
[<ffffffff8120b9fa>] kasan_report_error+0x38a/0x3f0
[<ffffffff8120a79f>] ? kasan_poison_shadow+0x2f/0x40
[<ffffffff8120b344>] ? kasan_unpoison_shadow+0x14/0x40
[<ffffffff8120a79f>] ? kasan_poison_shadow+0x2f/0x40
[<ffffffffa00026a7>] ? kmem_cache_oob+0xc3/0xc3 [test_kasan]
[<ffffffff8120a995>] __asan_store1+0x75/0xb0
[<ffffffffa0002601>] ? kmem_cache_oob+0x1d/0xc3 [test_kasan]
[<ffffffffa0002065>] ? kmalloc_oob_right+0x65/0x75 [test_kasan]
[<ffffffffa0002065>] kmalloc_oob_right+0x65/0x75 [test_kasan]
[<ffffffffa00026b0>] init_module+0x9/0x47 [test_kasan]
[<ffffffff810002d9>] do_one_initcall+0x99/0x200
[<ffffffff811e4e5c>] ? __vunmap+0xec/0x160
[<ffffffff81114f63>] load_module+0x2cb3/0x3b20
[<ffffffff8110fd70>] ? m_show+0x240/0x240
[<ffffffff81115f06>] SyS_finit_module+0x76/0x80
[<ffffffff81cd3129>] system_call_fastpath+0x12/0x17
Memory state around the buggy address:
ffff8800693bc300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8800693bc380: fc fc 00 00 00 00 00 00 00 00 00 00 00 00 00 fc
ffff8800693bc400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8800693bc480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8800693bc500: fc fc fc fc fc fc fc fc fc fc fc 00 00 00 00 00
>ffff8800693bc580: 00 00 00 00 00 00 00 00 00 00 03 fc fc fc fc fc
^
ffff8800693bc600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8800693bc680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8800693bc700: fc fc fc fc fb fb fb fb fb fb fb fb fb fb fb fb
ffff8800693bc780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8800693bc800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
ffff8800693bc600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8800693bc680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8800693bc700: fc fc fc fc fb fb fb fb fb fb fb fb fb fb fb fb
ffff8800693bc780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8800693bc800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
The header of the report discribe what kind of bug happened and what kind of
access caused it. It's followed by the description of the accessed slub object
......@@ -137,8 +139,8 @@ In the report above the arrows point to the shadow byte 03, which means that
the accessed address is partially accessible.
2. Implementation details
=========================
Implementation details
----------------------
From a high level, our approach to memory error detection is similar to that
of kmemcheck: use shadow memory to record whether each byte of memory is safe
......@@ -150,15 +152,15 @@ AddressSanitizer dedicates 1/8 of kernel memory to its shadow memory
offset to translate a memory address to its corresponding shadow address.
Here is the function which translates an address to its corresponding shadow
address:
address::
static inline void *kasan_mem_to_shadow(const void *addr)
{
static inline void *kasan_mem_to_shadow(const void *addr)
{
return ((unsigned long)addr >> KASAN_SHADOW_SCALE_SHIFT)
+ KASAN_SHADOW_OFFSET;
}
}
where KASAN_SHADOW_SCALE_SHIFT = 3.
where ``KASAN_SHADOW_SCALE_SHIFT = 3``.
Compile-time instrumentation used for checking memory accesses. Compiler inserts
function calls (__asan_load*(addr), __asan_store*(addr)) before each memory
......
......@@ -12,38 +12,38 @@ To achieve this goal it does not collect coverage in soft/hard interrupts
and instrumentation of some inherently non-deterministic parts of kernel is
disbled (e.g. scheduler, locking).
Usage:
======
Usage
-----
Configure kernel with:
Configure the kernel with::
CONFIG_KCOV=y
CONFIG_KCOV requires gcc built on revision 231296 or later.
Profiling data will only become accessible once debugfs has been mounted:
Profiling data will only become accessible once debugfs has been mounted::
mount -t debugfs none /sys/kernel/debug
The following program demonstrates kcov usage from within a test program:
#include <stdio.h>
#include <stddef.h>
#include <stdint.h>
#include <stdlib.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include <unistd.h>
#include <fcntl.h>
#define KCOV_INIT_TRACE _IOR('c', 1, unsigned long)
#define KCOV_ENABLE _IO('c', 100)
#define KCOV_DISABLE _IO('c', 101)
#define COVER_SIZE (64<<10)
int main(int argc, char **argv)
{
The following program demonstrates kcov usage from within a test program::
#include <stdio.h>
#include <stddef.h>
#include <stdint.h>
#include <stdlib.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include <unistd.h>
#include <fcntl.h>
#define KCOV_INIT_TRACE _IOR('c', 1, unsigned long)
#define KCOV_ENABLE _IO('c', 100)
#define KCOV_DISABLE _IO('c', 101)
#define COVER_SIZE (64<<10)
int main(int argc, char **argv)
{
int fd;
unsigned long *cover, n, i;
......@@ -83,24 +83,24 @@ int main(int argc, char **argv)
if (close(fd))
perror("close"), exit(1);
return 0;
}
After piping through addr2line output of the program looks as follows:
SyS_read
fs/read_write.c:562
__fdget_pos
fs/file.c:774
__fget_light
fs/file.c:746
__fget_light
fs/file.c:750
__fget_light
fs/file.c:760
__fdget_pos
fs/file.c:784
SyS_read
fs/read_write.c:562
}
After piping through addr2line output of the program looks as follows::
SyS_read
fs/read_write.c:562
__fdget_pos
fs/file.c:774
__fget_light
fs/file.c:746
__fget_light
fs/file.c:750
__fget_light
fs/file.c:760
__fdget_pos
fs/file.c:784
SyS_read
fs/read_write.c:562
If a program needs to collect coverage from several threads (independently),
it needs to open /sys/kernel/debug/kcov in each thread separately.
......
GETTING STARTED WITH KMEMCHECK
Getting started with kmemcheck
==============================
Vegard Nossum <vegardno@ifi.uio.no>
Contents
========
0. Introduction
1. Downloading
2. Configuring and compiling
3. How to use
3.1. Booting
3.2. Run-time enable/disable
3.3. Debugging
3.4. Annotating false positives
4. Reporting errors
5. Technical description
0. Introduction
===============
Introduction
------------
kmemcheck is a debugging feature for the Linux Kernel. More specifically, it
is a dynamic checker that detects and warns about some uses of uninitialized
......@@ -40,21 +26,20 @@ as much memory as normal. For this reason, kmemcheck is strictly a debugging
feature.
1. Downloading
==============
Downloading
-----------
As of version 2.6.31-rc1, kmemcheck is included in the mainline kernel.
2. Configuring and compiling
============================
Configuring and compiling
-------------------------
kmemcheck only works for the x86 (both 32- and 64-bit) platform. A number of
configuration variables must have specific settings in order for the kmemcheck
menu to even appear in "menuconfig". These are:
o CONFIG_CC_OPTIMIZE_FOR_SIZE=n
- ``CONFIG_CC_OPTIMIZE_FOR_SIZE=n``
This option is located under "General setup" / "Optimize for size".
Without this, gcc will use certain optimizations that usually lead to
......@@ -63,13 +48,11 @@ menu to even appear in "menuconfig". These are:
16 bits. kmemcheck sees only the 32-bit load, and may trigger a
warning for the upper 16 bits (if they're uninitialized).
o CONFIG_SLAB=y or CONFIG_SLUB=y
- ``CONFIG_SLAB=y`` or ``CONFIG_SLUB=y``
This option is located under "General setup" / "Choose SLAB
allocator".
o CONFIG_FUNCTION_TRACER=n
- ``CONFIG_FUNCTION_TRACER=n``
This option is located under "Kernel hacking" / "Tracers" / "Kernel
Function Tracer"
......@@ -80,12 +63,11 @@ menu to even appear in "menuconfig". These are:
modifies memory that was tracked by kmemcheck, the result is an
endless recursive page fault.
o CONFIG_DEBUG_PAGEALLOC=n
- ``CONFIG_DEBUG_PAGEALLOC=n``
This option is located under "Kernel hacking" / "Memory Debugging"
/ "Debug page memory allocations".
/ "Debug page memory allocations".
In addition, I highly recommend turning on CONFIG_DEBUG_INFO=y. This is also
In addition, I highly recommend turning on ``CONFIG_DEBUG_INFO=y``. This is also
located under "Kernel hacking". With this, you will be able to get line number
information from the kmemcheck warnings, which is extremely valuable in
debugging a problem. This option is not mandatory, however, because it slows
......@@ -95,12 +77,10 @@ Now the kmemcheck menu should be visible (under "Kernel hacking" / "Memory
Debugging" / "kmemcheck: trap use of uninitialized memory"). Here follows
a description of the kmemcheck configuration variables:
o CONFIG_KMEMCHECK
- ``CONFIG_KMEMCHECK``
This must be enabled in order to use kmemcheck at all...
o CONFIG_KMEMCHECK_[DISABLED | ENABLED | ONESHOT]_BY_DEFAULT
- ``CONFIG_KMEMCHECK_``[``DISABLED`` | ``ENABLED`` | ``ONESHOT``]``_BY_DEFAULT``
This option controls the status of kmemcheck at boot-time. "Enabled"
will enable kmemcheck right from the start, "disabled" will boot the
kernel as normal (but with the kmemcheck code compiled in, so it can
......@@ -125,8 +105,7 @@ a description of the kmemcheck configuration variables:
time overhead is not incurred, and the kernel will be almost as fast
as normal.
o CONFIG_KMEMCHECK_QUEUE_SIZE
- ``CONFIG_KMEMCHECK_QUEUE_SIZE``
Select the maximum number of error reports to store in an internal
(fixed-size) buffer. Since errors can occur virtually anywhere and in
any context, we need a temporary storage area which is guaranteed not
......@@ -147,8 +126,7 @@ a description of the kmemcheck configuration variables:
will get lost in that way instead. Try setting this to 10 or so on
such a setup.
o CONFIG_KMEMCHECK_SHADOW_COPY_SHIFT
- ``CONFIG_KMEMCHECK_SHADOW_COPY_SHIFT``
Select the number of shadow bytes to save along with each entry of the
error-report queue. These bytes indicate what parts of an allocation
are initialized, uninitialized, etc. and will be displayed when an
......@@ -161,8 +139,7 @@ a description of the kmemcheck configuration variables:
The default value should be fine for debugging most problems. It also
fits nicely within 80 columns.
o CONFIG_KMEMCHECK_PARTIAL_OK
- ``CONFIG_KMEMCHECK_PARTIAL_OK``
This option (when enabled) works around certain GCC optimizations that
produce 32-bit reads from 16-bit variables where the upper 16 bits are
thrown away afterwards.
......@@ -171,8 +148,7 @@ a description of the kmemcheck configuration variables:
some real errors, but disabling it would probably produce a lot of
false positives.
o CONFIG_KMEMCHECK_BITOPS_OK
- ``CONFIG_KMEMCHECK_BITOPS_OK``
This option silences warnings that would be generated for bit-field
accesses where not all the bits are initialized at the same time. This
may also hide some real bugs.
......@@ -184,36 +160,36 @@ a description of the kmemcheck configuration variables:
Now compile the kernel as usual.
3. How to use
=============
How to use
----------
3.1. Booting
============
Booting
~~~~~~~
First some information about the command-line options. There is only one
option specific to kmemcheck, and this is called "kmemcheck". It can be used
to override the default mode as chosen by the CONFIG_KMEMCHECK_*_BY_DEFAULT
to override the default mode as chosen by the ``CONFIG_KMEMCHECK_*_BY_DEFAULT``
option. Its possible settings are:
o kmemcheck=0 (disabled)
o kmemcheck=1 (enabled)
o kmemcheck=2 (one-shot mode)
- ``kmemcheck=0`` (disabled)
- ``kmemcheck=1`` (enabled)
- ``kmemcheck=2`` (one-shot mode)
If SLUB debugging has been enabled in the kernel, it may take precedence over
kmemcheck in such a way that the slab caches which are under SLUB debugging
will not be tracked by kmemcheck. In order to ensure that this doesn't happen
(even though it shouldn't by default), use SLUB's boot option "slub_debug",
like this: slub_debug=-
(even though it shouldn't by default), use SLUB's boot option ``slub_debug``,
like this: ``slub_debug=-``
In fact, this option may also be used for fine-grained control over SLUB vs.
kmemcheck. For example, if the command line includes "kmemcheck=1
slub_debug=,dentry", then SLUB debugging will be used only for the "dentry"
slab cache, and with kmemcheck tracking all the other caches. This is advanced
usage, however, and is not generally recommended.
kmemcheck. For example, if the command line includes
``kmemcheck=1 slub_debug=,dentry``, then SLUB debugging will be used only
for the "dentry" slab cache, and with kmemcheck tracking all the other
caches. This is advanced usage, however, and is not generally recommended.
3.2. Run-time enable/disable
============================
Run-time enable/disable
~~~~~~~~~~~~~~~~~~~~~~~
When the kernel has booted, it is possible to enable or disable kmemcheck at
run-time. WARNING: This feature is still experimental and may cause false
......@@ -221,48 +197,48 @@ positive warnings to appear. Therefore, try not to use this. If you find that
it doesn't work properly (e.g. you see an unreasonable amount of warnings), I
will be happy to take bug reports.
Use the file /proc/sys/kernel/kmemcheck for this purpose, e.g.:
Use the file ``/proc/sys/kernel/kmemcheck`` for this purpose, e.g.::
$ echo 0 > /proc/sys/kernel/kmemcheck # disables kmemcheck
The numbers are the same as for the kmemcheck= command-line option.
3.3. Debugging
==============
A typical report will look something like this:
WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88003e4a2024)
80000000000000000000000000000000000000000088ffff0000000000000000
i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
^
Pid: 1856, comm: ntpdate Not tainted 2.6.29-rc5 #264 945P-A
RIP: 0010:[<ffffffff8104ede8>] [<ffffffff8104ede8>] __dequeue_signal+0xc8/0x190
RSP: 0018:ffff88003cdf7d98 EFLAGS: 00210002
RAX: 0000000000000030 RBX: ffff88003d4ea968 RCX: 0000000000000009
RDX: ffff88003e5d6018 RSI: ffff88003e5d6024 RDI: ffff88003cdf7e84
RBP: ffff88003cdf7db8 R08: ffff88003e5d6000 R09: 0000000000000000
R10: 0000000000000080 R11: 0000000000000000 R12: 000000000000000e
R13: ffff88003cdf7e78 R14: ffff88003d530710 R15: ffff88003d5a98c8
FS: 0000000000000000(0000) GS:ffff880001982000(0063) knlGS:00000
CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: ffff88003f806ea0 CR3: 000000003c036000 CR4: 00000000000006a0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400
[<ffffffff8104f04e>] dequeue_signal+0x8e/0x170
[<ffffffff81050bd8>] get_signal_to_deliver+0x98/0x390
[<ffffffff8100b87d>] do_notify_resume+0xad/0x7d0
[<ffffffff8100c7b5>] int_signal+0x12/0x17
[<ffffffffffffffff>] 0xffffffffffffffff
The numbers are the same as for the ``kmemcheck=`` command-line option.
Debugging
~~~~~~~~~
A typical report will look something like this::
WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88003e4a2024)
80000000000000000000000000000000000000000088ffff0000000000000000
i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
^
Pid: 1856, comm: ntpdate Not tainted 2.6.29-rc5 #264 945P-A
RIP: 0010:[<ffffffff8104ede8>] [<ffffffff8104ede8>] __dequeue_signal+0xc8/0x190
RSP: 0018:ffff88003cdf7d98 EFLAGS: 00210002
RAX: 0000000000000030 RBX: ffff88003d4ea968 RCX: 0000000000000009
RDX: ffff88003e5d6018 RSI: ffff88003e5d6024 RDI: ffff88003cdf7e84
RBP: ffff88003cdf7db8 R08: ffff88003e5d6000 R09: 0000000000000000
R10: 0000000000000080 R11: 0000000000000000 R12: 000000000000000e
R13: ffff88003cdf7e78 R14: ffff88003d530710 R15: ffff88003d5a98c8
FS: 0000000000000000(0000) GS:ffff880001982000(0063) knlGS:00000
CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: ffff88003f806ea0 CR3: 000000003c036000 CR4: 00000000000006a0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400
[<ffffffff8104f04e>] dequeue_signal+0x8e/0x170
[<ffffffff81050bd8>] get_signal_to_deliver+0x98/0x390
[<ffffffff8100b87d>] do_notify_resume+0xad/0x7d0
[<ffffffff8100c7b5>] int_signal+0x12/0x17
[<ffffffffffffffff>] 0xffffffffffffffff
The single most valuable information in this report is the RIP (or EIP on 32-
bit) value. This will help us pinpoint exactly which instruction that caused
the warning.
If your kernel was compiled with CONFIG_DEBUG_INFO=y, then all we have to do
is give this address to the addr2line program, like this:
If your kernel was compiled with ``CONFIG_DEBUG_INFO=y``, then all we have to do
is give this address to the addr2line program, like this::
$ addr2line -e vmlinux -i ffffffff8104ede8
arch/x86/include/asm/string_64.h:12
......@@ -270,76 +246,78 @@ is give this address to the addr2line program, like this:
kernel/signal.c:380
kernel/signal.c:410
The "-e vmlinux" tells addr2line which file to look in. IMPORTANT: This must
be the vmlinux of the kernel that produced the warning in the first place! If
not, the line number information will almost certainly be wrong.
The "-i" tells addr2line to also print the line numbers of inlined functions.
In this case, the flag was very important, because otherwise, it would only
have printed the first line, which is just a call to memcpy(), which could be
called from a thousand places in the kernel, and is therefore not very useful.
These inlined functions would not show up in the stack trace above, simply
because the kernel doesn't load the extra debugging information. This
technique can of course be used with ordinary kernel oopses as well.
In this case, it's the caller of memcpy() that is interesting, and it can be
found in include/asm-generic/siginfo.h, line 287:
281 static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
282 {
283 if (from->si_code < 0)
284 memcpy(to, from, sizeof(*to));
285 else
286 /* _sigchld is currently the largest know union member */
287 memcpy(to, from, __ARCH_SI_PREAMBLE_SIZE + sizeof(from->_sifields._sigchld));
288 }
The "``-e vmlinux``" tells addr2line which file to look in. **IMPORTANT:**
This must be the vmlinux of the kernel that produced the warning in the
first place! If not, the line number information will almost certainly be
wrong.
The "``-i``" tells addr2line to also print the line numbers of inlined
functions. In this case, the flag was very important, because otherwise,
it would only have printed the first line, which is just a call to
``memcpy()``, which could be called from a thousand places in the kernel, and
is therefore not very useful. These inlined functions would not show up in
the stack trace above, simply because the kernel doesn't load the extra
debugging information. This technique can of course be used with ordinary
kernel oopses as well.
In this case, it's the caller of ``memcpy()`` that is interesting, and it can be
found in ``include/asm-generic/siginfo.h``, line 287::
281 static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
282 {
283 if (from->si_code < 0)
284 memcpy(to, from, sizeof(*to));
285 else
286 /* _sigchld is currently the largest know union member */
287 memcpy(to, from, __ARCH_SI_PREAMBLE_SIZE + sizeof(from->_sifields._sigchld));
288 }
Since this was a read (kmemcheck usually warns about reads only, though it can
warn about writes to unallocated or freed memory as well), it was probably the
"from" argument which contained some uninitialized bytes. Following the chain
of calls, we move upwards to see where "from" was allocated or initialized,
kernel/signal.c, line 380:
359 static void collect_signal(int sig, struct sigpending *list, siginfo_t *info)
360 {
...
367 list_for_each_entry(q, &list->list, list) {
368 if (q->info.si_signo == sig) {
369 if (first)
370 goto still_pending;
371 first = q;
...
377 if (first) {
378 still_pending:
379 list_del_init(&first->list);
380 copy_siginfo(info, &first->info);
381 __sigqueue_free(first);
...
392 }
393 }
Here, it is &first->info that is being passed on to copy_siginfo(). The
variable "first" was found on a list -- passed in as the second argument to
collect_signal(). We continue our journey through the stack, to figure out
where the item on "list" was allocated or initialized. We move to line 410:
395 static int __dequeue_signal(struct sigpending *pending, sigset_t *mask,
396 siginfo_t *info)
397 {
...
410 collect_signal(sig, pending, info);
...
414 }
Now we need to follow the "pending" pointer, since that is being passed on to
collect_signal() as "list". At this point, we've run out of lines from the
``kernel/signal.c``, line 380::
359 static void collect_signal(int sig, struct sigpending *list, siginfo_t *info)
360 {
...
367 list_for_each_entry(q, &list->list, list) {
368 if (q->info.si_signo == sig) {
369 if (first)
370 goto still_pending;
371 first = q;
...
377 if (first) {
378 still_pending:
379 list_del_init(&first->list);
380 copy_siginfo(info, &first->info);
381 __sigqueue_free(first);
...
392 }
393 }
Here, it is ``&first->info`` that is being passed on to ``copy_siginfo()``. The
variable ``first`` was found on a list -- passed in as the second argument to
``collect_signal()``. We continue our journey through the stack, to figure out
where the item on "list" was allocated or initialized. We move to line 410::
395 static int __dequeue_signal(struct sigpending *pending, sigset_t *mask,
396 siginfo_t *info)
397 {
...
410 collect_signal(sig, pending, info);
...
414 }
Now we need to follow the ``pending`` pointer, since that is being passed on to
``collect_signal()`` as ``list``. At this point, we've run out of lines from the
"addr2line" output. Not to worry, we just paste the next addresses from the
kmemcheck stack dump, i.e.:
kmemcheck stack dump, i.e.::
[<ffffffff8104f04e>] dequeue_signal+0x8e/0x170
[<ffffffff81050bd8>] get_signal_to_deliver+0x98/0x390
[<ffffffff8100b87d>] do_notify_resume+0xad/0x7d0
[<ffffffff8100c7b5>] int_signal+0x12/0x17
[<ffffffff8104f04e>] dequeue_signal+0x8e/0x170
[<ffffffff81050bd8>] get_signal_to_deliver+0x98/0x390
[<ffffffff8100b87d>] do_notify_resume+0xad/0x7d0
[<ffffffff8100c7b5>] int_signal+0x12/0x17
$ addr2line -e vmlinux -i ffffffff8104f04e ffffffff81050bd8 \
ffffffff8100b87d ffffffff8100c7b5
......@@ -351,198 +329,199 @@ kmemcheck stack dump, i.e.:
Remember that since these addresses were found on the stack and not as the
RIP value, they actually point to the _next_ instruction (they are return
addresses). This becomes obvious when we look at the code for line 446:
422 int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info)
423 {
...
431 signr = __dequeue_signal(&tsk->signal->shared_pending,
432 mask, info);
433 /*
434 * itimer signal ?
435 *
436 * itimers are process shared and we restart periodic
437 * itimers in the signal delivery path to prevent DoS
438 * attacks in the high resolution timer case. This is
439 * compliant with the old way of self restarting
440 * itimers, as the SIGALRM is a legacy signal and only
441 * queued once. Changing the restart behaviour to
442 * restart the timer in the signal dequeue path is
443 * reducing the timer noise on heavy loaded !highres
444 * systems too.
445 */
446 if (unlikely(signr == SIGALRM)) {
...
489 }
addresses). This becomes obvious when we look at the code for line 446::
422 int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info)
423 {
...
431 signr = __dequeue_signal(&tsk->signal->shared_pending,
432 mask, info);
433 /*
434 * itimer signal ?
435 *
436 * itimers are process shared and we restart periodic
437 * itimers in the signal delivery path to prevent DoS
438 * attacks in the high resolution timer case. This is
439 * compliant with the old way of self restarting
440 * itimers, as the SIGALRM is a legacy signal and only
441 * queued once. Changing the restart behaviour to
442 * restart the timer in the signal dequeue path is
443 * reducing the timer noise on heavy loaded !highres
444 * systems too.
445 */
446 if (unlikely(signr == SIGALRM)) {
...
489 }
So instead of looking at 446, we should be looking at 431, which is the line
that executes just before 446. Here we see that what we are looking for is
&tsk->signal->shared_pending.
``&tsk->signal->shared_pending``.
Our next task is now to figure out which function that puts items on this
"shared_pending" list. A crude, but efficient tool, is git grep:
``shared_pending`` list. A crude, but efficient tool, is ``git grep``::
$ git grep -n 'shared_pending' kernel/
...
kernel/signal.c:828: pending = group ? &t->signal->shared_pending : &t->pending;
kernel/signal.c:1339: pending = group ? &t->signal->shared_pending : &t->pending;
kernel/signal.c:828: pending = group ? &t->signal->shared_pending : &t->pending;
kernel/signal.c:1339: pending = group ? &t->signal->shared_pending : &t->pending;
...
There were more results, but none of them were related to list operations,
and these were the only assignments. We inspect the line numbers more closely
and find that this is indeed where items are being added to the list:
816 static int send_signal(int sig, struct siginfo *info, struct task_struct *t,
817 int group)
818 {
...
828 pending = group ? &t->signal->shared_pending : &t->pending;
...
851 q = __sigqueue_alloc(t, GFP_ATOMIC, (sig < SIGRTMIN &&
852 (is_si_special(info) ||
853 info->si_code >= 0)));
854 if (q) {
855 list_add_tail(&q->list, &pending->list);
...
890 }
and:
1309 int send_sigqueue(struct sigqueue *q, struct task_struct *t, int group)
1310 {
....
1339 pending = group ? &t->signal->shared_pending : &t->pending;
1340 list_add_tail(&q->list, &pending->list);
....
1347 }
In the first case, the list element we are looking for, "q", is being returned
from the function __sigqueue_alloc(), which looks like an allocation function.
Let's take a look at it:
187 static struct sigqueue *__sigqueue_alloc(struct task_struct *t, gfp_t flags,
188 int override_rlimit)
189 {
190 struct sigqueue *q = NULL;
191 struct user_struct *user;
192
193 /*
194 * We won't get problems with the target's UID changing under us
195 * because changing it requires RCU be used, and if t != current, the
196 * caller must be holding the RCU readlock (by way of a spinlock) and
197 * we use RCU protection here
198 */
199 user = get_uid(__task_cred(t)->user);
200 atomic_inc(&user->sigpending);
201 if (override_rlimit ||
202 atomic_read(&user->sigpending) <=
203 t->signal->rlim[RLIMIT_SIGPENDING].rlim_cur)
204 q = kmem_cache_alloc(sigqueue_cachep, flags);
205 if (unlikely(q == NULL)) {
206 atomic_dec(&user->sigpending);
207 free_uid(user);
208 } else {
209 INIT_LIST_HEAD(&q->list);
210 q->flags = 0;
211 q->user = user;
212 }
213
214 return q;
215 }
We see that this function initializes q->list, q->flags, and q->user. It seems
that now is the time to look at the definition of "struct sigqueue", e.g.:
14 struct sigqueue {
15 struct list_head list;
16 int flags;
17 siginfo_t info;
18 struct user_struct *user;
19 };
And, you might remember, it was a memcpy() on &first->info that caused the
warning, so this makes perfect sense. It also seems reasonable to assume that
it is the caller of __sigqueue_alloc() that has the responsibility of filling
out (initializing) this member.
and find that this is indeed where items are being added to the list::
816 static int send_signal(int sig, struct siginfo *info, struct task_struct *t,
817 int group)
818 {
...
828 pending = group ? &t->signal->shared_pending : &t->pending;
...
851 q = __sigqueue_alloc(t, GFP_ATOMIC, (sig < SIGRTMIN &&
852 (is_si_special(info) ||
853 info->si_code >= 0)));
854 if (q) {
855 list_add_tail(&q->list, &pending->list);
...
890 }
and::
1309 int send_sigqueue(struct sigqueue *q, struct task_struct *t, int group)
1310 {
....
1339 pending = group ? &t->signal->shared_pending : &t->pending;
1340 list_add_tail(&q->list, &pending->list);
....
1347 }
In the first case, the list element we are looking for, ``q``, is being
returned from the function ``__sigqueue_alloc()``, which looks like an
allocation function. Let's take a look at it::
187 static struct sigqueue *__sigqueue_alloc(struct task_struct *t, gfp_t flags,
188 int override_rlimit)
189 {
190 struct sigqueue *q = NULL;
191 struct user_struct *user;
192
193 /*
194 * We won't get problems with the target's UID changing under us
195 * because changing it requires RCU be used, and if t != current, the
196 * caller must be holding the RCU readlock (by way of a spinlock) and
197 * we use RCU protection here
198 */
199 user = get_uid(__task_cred(t)->user);
200 atomic_inc(&user->sigpending);
201 if (override_rlimit ||
202 atomic_read(&user->sigpending) <=
203 t->signal->rlim[RLIMIT_SIGPENDING].rlim_cur)
204 q = kmem_cache_alloc(sigqueue_cachep, flags);
205 if (unlikely(q == NULL)) {
206 atomic_dec(&user->sigpending);
207 free_uid(user);
208 } else {
209 INIT_LIST_HEAD(&q->list);
210 q->flags = 0;
211 q->user = user;
212 }
213
214 return q;
215 }
We see that this function initializes ``q->list``, ``q->flags``, and
``q->user``. It seems that now is the time to look at the definition of
``struct sigqueue``, e.g.::
14 struct sigqueue {
15 struct list_head list;
16 int flags;
17 siginfo_t info;
18 struct user_struct *user;
19 };
And, you might remember, it was a ``memcpy()`` on ``&first->info`` that
caused the warning, so this makes perfect sense. It also seems reasonable
to assume that it is the caller of ``__sigqueue_alloc()`` that has the
responsibility of filling out (initializing) this member.
But just which fields of the struct were uninitialized? Let's look at
kmemcheck's report again:
kmemcheck's report again::
WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88003e4a2024)
80000000000000000000000000000000000000000088ffff0000000000000000
i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
^
WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88003e4a2024)
80000000000000000000000000000000000000000088ffff0000000000000000
i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
^
These first two lines are the memory dump of the memory object itself, and the
shadow bytemap, respectively. The memory object itself is in this case
&first->info. Just beware that the start of this dump is NOT the start of the
object itself! The position of the caret (^) corresponds with the address of
the read (ffff88003e4a2024).
These first two lines are the memory dump of the memory object itself, and
the shadow bytemap, respectively. The memory object itself is in this case
``&first->info``. Just beware that the start of this dump is NOT the start
of the object itself! The position of the caret (^) corresponds with the
address of the read (ffff88003e4a2024).
The shadow bytemap dump legend is as follows:
i - initialized
u - uninitialized
a - unallocated (memory has been allocated by the slab layer, but has not
yet been handed off to anybody)
f - freed (memory has been allocated by the slab layer, but has been freed
by the previous owner)
- i: initialized
- u: uninitialized
- a: unallocated (memory has been allocated by the slab layer, but has not
yet been handed off to anybody)
- f: freed (memory has been allocated by the slab layer, but has been freed
by the previous owner)
In order to figure out where (relative to the start of the object) the
uninitialized memory was located, we have to look at the disassembly. For
that, we'll need the RIP address again:
that, we'll need the RIP address again::
RIP: 0010:[<ffffffff8104ede8>] [<ffffffff8104ede8>] __dequeue_signal+0xc8/0x190
RIP: 0010:[<ffffffff8104ede8>] [<ffffffff8104ede8>] __dequeue_signal+0xc8/0x190
$ objdump -d --no-show-raw-insn vmlinux | grep -C 8 ffffffff8104ede8:
ffffffff8104edc8: mov %r8,0x8(%r8)
ffffffff8104edcc: test %r10d,%r10d
ffffffff8104edcf: js ffffffff8104ee88 <__dequeue_signal+0x168>
ffffffff8104edd5: mov %rax,%rdx
ffffffff8104edd8: mov $0xc,%ecx
ffffffff8104eddd: mov %r13,%rdi
ffffffff8104ede0: mov $0x30,%eax
ffffffff8104ede5: mov %rdx,%rsi
ffffffff8104ede8: rep movsl %ds:(%rsi),%es:(%rdi)
ffffffff8104edea: test $0x2,%al
ffffffff8104edec: je ffffffff8104edf0 <__dequeue_signal+0xd0>
ffffffff8104edee: movsw %ds:(%rsi),%es:(%rdi)
ffffffff8104edf0: test $0x1,%al
ffffffff8104edf2: je ffffffff8104edf5 <__dequeue_signal+0xd5>
ffffffff8104edf4: movsb %ds:(%rsi),%es:(%rdi)
ffffffff8104edf5: mov %r8,%rdi
ffffffff8104edf8: callq ffffffff8104de60 <__sigqueue_free>
As expected, it's the "rep movsl" instruction from the memcpy() that causes
the warning. We know about REP MOVSL that it uses the register RCX to count
the number of remaining iterations. By taking a look at the register dump
again (from the kmemcheck report), we can figure out how many bytes were left
to copy:
RAX: 0000000000000030 RBX: ffff88003d4ea968 RCX: 0000000000000009
By looking at the disassembly, we also see that %ecx is being loaded with the
value $0xc just before (ffffffff8104edd8), so we are very lucky. Keep in mind
that this is the number of iterations, not bytes. And since this is a "long"
operation, we need to multiply by 4 to get the number of bytes. So this means
that the uninitialized value was encountered at 4 * (0xc - 0x9) = 12 bytes
from the start of the object.
We can now try to figure out which field of the "struct siginfo" that was not
initialized. This is the beginning of the struct:
40 typedef struct siginfo {
41 int si_signo;
42 int si_errno;
43 int si_code;
44
45 union {
..
92 } _sifields;
93 } siginfo_t;
ffffffff8104edc8: mov %r8,0x8(%r8)
ffffffff8104edcc: test %r10d,%r10d
ffffffff8104edcf: js ffffffff8104ee88 <__dequeue_signal+0x168>
ffffffff8104edd5: mov %rax,%rdx
ffffffff8104edd8: mov $0xc,%ecx
ffffffff8104eddd: mov %r13,%rdi
ffffffff8104ede0: mov $0x30,%eax
ffffffff8104ede5: mov %rdx,%rsi
ffffffff8104ede8: rep movsl %ds:(%rsi),%es:(%rdi)
ffffffff8104edea: test $0x2,%al
ffffffff8104edec: je ffffffff8104edf0 <__dequeue_signal+0xd0>
ffffffff8104edee: movsw %ds:(%rsi),%es:(%rdi)
ffffffff8104edf0: test $0x1,%al
ffffffff8104edf2: je ffffffff8104edf5 <__dequeue_signal+0xd5>
ffffffff8104edf4: movsb %ds:(%rsi),%es:(%rdi)
ffffffff8104edf5: mov %r8,%rdi
ffffffff8104edf8: callq ffffffff8104de60 <__sigqueue_free>
As expected, it's the "``rep movsl``" instruction from the ``memcpy()``
that causes the warning. We know about ``REP MOVSL`` that it uses the register
``RCX`` to count the number of remaining iterations. By taking a look at the
register dump again (from the kmemcheck report), we can figure out how many
bytes were left to copy::
RAX: 0000000000000030 RBX: ffff88003d4ea968 RCX: 0000000000000009
By looking at the disassembly, we also see that ``%ecx`` is being loaded
with the value ``$0xc`` just before (ffffffff8104edd8), so we are very
lucky. Keep in mind that this is the number of iterations, not bytes. And
since this is a "long" operation, we need to multiply by 4 to get the
number of bytes. So this means that the uninitialized value was encountered
at 4 * (0xc - 0x9) = 12 bytes from the start of the object.
We can now try to figure out which field of the "``struct siginfo``" that
was not initialized. This is the beginning of the struct::
40 typedef struct siginfo {
41 int si_signo;
42 int si_errno;
43 int si_code;
44
45 union {
..
92 } _sifields;
93 } siginfo_t;
On 64-bit, the int is 4 bytes long, so it must the union member that has
not been initialized. We can verify this using gdb:
not been initialized. We can verify this using gdb::
$ gdb vmlinux
...
......@@ -550,82 +529,83 @@ not been initialized. We can verify this using gdb:
$1 = (union {...} *) 0x10
Actually, it seems that the union member is located at offset 0x10 -- which
means that gcc has inserted 4 bytes of padding between the members si_code
and _sifields. We can now get a fuller picture of the memory dump:
_----------------------------=> si_code
/ _--------------------=> (padding)
| / _------------=> _sifields(._kill._pid)
| | / _----=> _sifields(._kill._uid)
| | | /
-------|-------|-------|-------|
80000000000000000000000000000000000000000088ffff0000000000000000
i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
This allows us to realize another important fact: si_code contains the value
0x80. Remember that x86 is little endian, so the first 4 bytes "80000000" are
really the number 0x00000080. With a bit of research, we find that this is
actually the constant SI_KERNEL defined in include/asm-generic/siginfo.h:
144 #define SI_KERNEL 0x80 /* sent by the kernel from somewhere */
This macro is used in exactly one place in the x86 kernel: In send_signal()
in kernel/signal.c:
816 static int send_signal(int sig, struct siginfo *info, struct task_struct *t,
817 int group)
818 {
...
828 pending = group ? &t->signal->shared_pending : &t->pending;
...
851 q = __sigqueue_alloc(t, GFP_ATOMIC, (sig < SIGRTMIN &&
852 (is_si_special(info) ||
853 info->si_code >= 0)));
854 if (q) {
855 list_add_tail(&q->list, &pending->list);
856 switch ((unsigned long) info) {
...
865 case (unsigned long) SEND_SIG_PRIV:
866 q->info.si_signo = sig;
867 q->info.si_errno = 0;
868 q->info.si_code = SI_KERNEL;
869 q->info.si_pid = 0;
870 q->info.si_uid = 0;
871 break;
...
890 }
Not only does this match with the .si_code member, it also matches the place
means that gcc has inserted 4 bytes of padding between the members ``si_code``
and ``_sifields``. We can now get a fuller picture of the memory dump::
_----------------------------=> si_code
/ _--------------------=> (padding)
| / _------------=> _sifields(._kill._pid)
| | / _----=> _sifields(._kill._uid)
| | | /
-------|-------|-------|-------|
80000000000000000000000000000000000000000088ffff0000000000000000
i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
This allows us to realize another important fact: ``si_code`` contains the
value 0x80. Remember that x86 is little endian, so the first 4 bytes
"80000000" are really the number 0x00000080. With a bit of research, we
find that this is actually the constant ``SI_KERNEL`` defined in
``include/asm-generic/siginfo.h``::
144 #define SI_KERNEL 0x80 /* sent by the kernel from somewhere */
This macro is used in exactly one place in the x86 kernel: In ``send_signal()``
in ``kernel/signal.c``::
816 static int send_signal(int sig, struct siginfo *info, struct task_struct *t,
817 int group)
818 {
...
828 pending = group ? &t->signal->shared_pending : &t->pending;
...
851 q = __sigqueue_alloc(t, GFP_ATOMIC, (sig < SIGRTMIN &&
852 (is_si_special(info) ||
853 info->si_code >= 0)));
854 if (q) {
855 list_add_tail(&q->list, &pending->list);
856 switch ((unsigned long) info) {
...
865 case (unsigned long) SEND_SIG_PRIV:
866 q->info.si_signo = sig;
867 q->info.si_errno = 0;
868 q->info.si_code = SI_KERNEL;
869 q->info.si_pid = 0;
870 q->info.si_uid = 0;
871 break;
...
890 }
Not only does this match with the ``.si_code`` member, it also matches the place
we found earlier when looking for where siginfo_t objects are enqueued on the
"shared_pending" list.
``shared_pending`` list.
So to sum up: It seems that it is the padding introduced by the compiler
between two struct fields that is uninitialized, and this gets reported when
we do a memcpy() on the struct. This means that we have identified a false
we do a ``memcpy()`` on the struct. This means that we have identified a false
positive warning.
Normally, kmemcheck will not report uninitialized accesses in memcpy() calls
Normally, kmemcheck will not report uninitialized accesses in ``memcpy()`` calls
when both the source and destination addresses are tracked. (Instead, we copy
the shadow bytemap as well). In this case, the destination address clearly
was not tracked. We can dig a little deeper into the stack trace from above:
was not tracked. We can dig a little deeper into the stack trace from above::
arch/x86/kernel/signal.c:805
arch/x86/kernel/signal.c:871
arch/x86/kernel/entry_64.S:694
And we clearly see that the destination siginfo object is located on the
stack:
782 static void do_signal(struct pt_regs *regs)
783 {
784 struct k_sigaction ka;
785 siginfo_t info;
...
804 signr = get_signal_to_deliver(&info, &ka, regs, NULL);
...
854 }
And this &info is what eventually gets passed to copy_siginfo() as the
stack::
782 static void do_signal(struct pt_regs *regs)
783 {
784 struct k_sigaction ka;
785 siginfo_t info;
...
804 signr = get_signal_to_deliver(&info, &ka, regs, NULL);
...
854 }
And this ``&info`` is what eventually gets passed to ``copy_siginfo()`` as the
destination argument.
Now, even though we didn't find an actual error here, the example is still a
......@@ -633,31 +613,30 @@ good one, because it shows how one would go about to find out what the report
was all about.
3.4. Annotating false positives
===============================
Annotating false positives
~~~~~~~~~~~~~~~~~~~~~~~~~~
There are a few different ways to make annotations in the source code that
will keep kmemcheck from checking and reporting certain allocations. Here
they are:
o __GFP_NOTRACK_FALSE_POSITIVE
This flag can be passed to kmalloc() or kmem_cache_alloc() (therefore
also to other functions that end up calling one of these) to indicate
that the allocation should not be tracked because it would lead to
a false positive report. This is a "big hammer" way of silencing
kmemcheck; after all, even if the false positive pertains to
particular field in a struct, for example, we will now lose the
ability to find (real) errors in other parts of the same struct.
- ``__GFP_NOTRACK_FALSE_POSITIVE``
This flag can be passed to ``kmalloc()`` or ``kmem_cache_alloc()``
(therefore also to other functions that end up calling one of
these) to indicate that the allocation should not be tracked
because it would lead to a false positive report. This is a "big
hammer" way of silencing kmemcheck; after all, even if the false
positive pertains to particular field in a struct, for example, we
will now lose the ability to find (real) errors in other parts of
the same struct.
Example:
Example::
/* No warnings will ever trigger on accessing any part of x */
x = kmalloc(sizeof *x, GFP_KERNEL | __GFP_NOTRACK_FALSE_POSITIVE);
o kmemcheck_bitfield_begin(name)/kmemcheck_bitfield_end(name) and
kmemcheck_annotate_bitfield(ptr, name)
- ``kmemcheck_bitfield_begin(name)``/``kmemcheck_bitfield_end(name)`` and
``kmemcheck_annotate_bitfield(ptr, name)``
The first two of these three macros can be used inside struct
definitions to signal, respectively, the beginning and end of a
bitfield. Additionally, this will assign the bitfield a name, which
......@@ -667,7 +646,7 @@ they are:
kmemcheck_annotate_bitfield() at the point of allocation, to indicate
which parts of the allocation is part of a bitfield.
Example:
Example::
struct foo {
int x;
......@@ -685,13 +664,13 @@ they are:
/* No warnings will trigger on accessing the bitfield of x */
kmemcheck_annotate_bitfield(x, flags);
Note that kmemcheck_annotate_bitfield() can be used even before the
return value of kmalloc() is checked -- in other words, passing NULL
Note that ``kmemcheck_annotate_bitfield()`` can be used even before the
return value of ``kmalloc()`` is checked -- in other words, passing NULL
as the first argument is legal (and will do nothing).
4. Reporting errors
===================
Reporting errors
----------------
As we have seen, kmemcheck will produce false positive reports. Therefore, it
is not very wise to blindly post kmemcheck warnings to mailing lists and
......@@ -710,8 +689,8 @@ available) are of course a great help too.
Happy hacking!
5. Technical description
========================
Technical description
---------------------
kmemcheck works by marking memory pages non-present. This means that whenever
somebody attempts to access the page, a page fault is generated. The page
......
Kernel Memory Leak Detector
===========================
Introduction
------------
Kmemleak provides a way of detecting possible kernel memory leaks in a
way similar to a tracing garbage collector
(https://en.wikipedia.org/wiki/Garbage_collection_%28computer_science%29#Tracing_garbage_collectors),
with the difference that the orphan objects are not freed but only
reported via /sys/kernel/debug/kmemleak. A similar method is used by the
Valgrind tool (memcheck --leak-check) to detect the memory leaks in
Valgrind tool (``memcheck --leak-check``) to detect the memory leaks in
user-space applications.
Kmemleak is supported on x86, arm, powerpc, sparc, sh, microblaze, ppc, mips, s390, metag and tile.
......@@ -19,20 +16,20 @@ Usage
CONFIG_DEBUG_KMEMLEAK in "Kernel hacking" has to be enabled. A kernel
thread scans the memory every 10 minutes (by default) and prints the
number of new unreferenced objects found. To display the details of all
the possible memory leaks:
the possible memory leaks::
# mount -t debugfs nodev /sys/kernel/debug/
# cat /sys/kernel/debug/kmemleak
To trigger an intermediate memory scan:
To trigger an intermediate memory scan::
# echo scan > /sys/kernel/debug/kmemleak
To clear the list of all current possible memory leaks:
To clear the list of all current possible memory leaks::
# echo clear > /sys/kernel/debug/kmemleak
New leaks will then come up upon reading /sys/kernel/debug/kmemleak
New leaks will then come up upon reading ``/sys/kernel/debug/kmemleak``
again.
Note that the orphan objects are listed in the order they were allocated
......@@ -40,22 +37,31 @@ and one object at the beginning of the list may cause other subsequent
objects to be reported as orphan.
Memory scanning parameters can be modified at run-time by writing to the
/sys/kernel/debug/kmemleak file. The following parameters are supported:
off - disable kmemleak (irreversible)
stack=on - enable the task stacks scanning (default)
stack=off - disable the tasks stacks scanning
scan=on - start the automatic memory scanning thread (default)
scan=off - stop the automatic memory scanning thread
scan=<secs> - set the automatic memory scanning period in seconds
(default 600, 0 to stop the automatic scanning)
scan - trigger a memory scan
clear - clear list of current memory leak suspects, done by
marking all current reported unreferenced objects grey,
or free all kmemleak objects if kmemleak has been disabled.
dump=<addr> - dump information about the object found at <addr>
Kmemleak can also be disabled at boot-time by passing "kmemleak=off" on
``/sys/kernel/debug/kmemleak`` file. The following parameters are supported:
- off
disable kmemleak (irreversible)
- stack=on
enable the task stacks scanning (default)
- stack=off
disable the tasks stacks scanning
- scan=on
start the automatic memory scanning thread (default)
- scan=off
stop the automatic memory scanning thread
- scan=<secs>
set the automatic memory scanning period in seconds
(default 600, 0 to stop the automatic scanning)
- scan
trigger a memory scan
- clear
clear list of current memory leak suspects, done by
marking all current reported unreferenced objects grey,
or free all kmemleak objects if kmemleak has been disabled.
- dump=<addr>
dump information about the object found at <addr>
Kmemleak can also be disabled at boot-time by passing ``kmemleak=off`` on
the kernel command line.
Memory may be allocated or freed before kmemleak is initialised and
......@@ -63,13 +69,14 @@ these actions are stored in an early log buffer. The size of this buffer
is configured via the CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE option.
If CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF are enabled, the kmemleak is
disabled by default. Passing "kmemleak=on" on the kernel command
disabled by default. Passing ``kmemleak=on`` on the kernel command
line enables the function.
Basic Algorithm
---------------
The memory allocations via kmalloc, vmalloc, kmem_cache_alloc and
The memory allocations via :c:func:`kmalloc`, :c:func:`vmalloc`,
:c:func:`kmem_cache_alloc` and
friends are traced and the pointers, together with additional
information like size and stack trace, are stored in a rbtree.
The corresponding freeing function calls are tracked and the pointers
......@@ -113,13 +120,13 @@ when doing development. To work around these situations you can use the
you can find new unreferenced objects; this should help with testing
specific sections of code.
To test a critical section on demand with a clean kmemleak do:
To test a critical section on demand with a clean kmemleak do::
# echo clear > /sys/kernel/debug/kmemleak
... test your kernel or modules ...
# echo scan > /sys/kernel/debug/kmemleak
Then as usual to get your report with:
Then as usual to get your report with::
# cat /sys/kernel/debug/kmemleak
......@@ -131,7 +138,7 @@ disabled by the user or due to an fatal error, internal kmemleak objects
won't be freed when kmemleak is disabled, and those objects may occupy
a large part of physical memory.
In this situation, you may reclaim memory with:
In this situation, you may reclaim memory with::
# echo clear > /sys/kernel/debug/kmemleak
......@@ -140,20 +147,20 @@ Kmemleak API
See the include/linux/kmemleak.h header for the functions prototype.
kmemleak_init - initialize kmemleak
kmemleak_alloc - notify of a memory block allocation
kmemleak_alloc_percpu - notify of a percpu memory block allocation
kmemleak_free - notify of a memory block freeing
kmemleak_free_part - notify of a partial memory block freeing
kmemleak_free_percpu - notify of a percpu memory block freeing
kmemleak_update_trace - update object allocation stack trace
kmemleak_not_leak - mark an object as not a leak
kmemleak_ignore - do not scan or report an object as leak
kmemleak_scan_area - add scan areas inside a memory block
kmemleak_no_scan - do not scan a memory block
kmemleak_erase - erase an old value in a pointer variable
kmemleak_alloc_recursive - as kmemleak_alloc but checks the recursiveness
kmemleak_free_recursive - as kmemleak_free but checks the recursiveness
- ``kmemleak_init`` - initialize kmemleak
- ``kmemleak_alloc`` - notify of a memory block allocation
- ``kmemleak_alloc_percpu`` - notify of a percpu memory block allocation
- ``kmemleak_free`` - notify of a memory block freeing
- ``kmemleak_free_part`` - notify of a partial memory block freeing
- ``kmemleak_free_percpu`` - notify of a percpu memory block freeing
- ``kmemleak_update_trace`` - update object allocation stack trace
- ``kmemleak_not_leak`` - mark an object as not a leak
- ``kmemleak_ignore`` - do not scan or report an object as leak
- ``kmemleak_scan_area`` - add scan areas inside a memory block
- ``kmemleak_no_scan`` - do not scan a memory block
- ``kmemleak_erase`` - erase an old value in a pointer variable
- ``kmemleak_alloc_recursive`` - as kmemleak_alloc but checks the recursiveness
- ``kmemleak_free_recursive`` - as kmemleak_free but checks the recursiveness
Dealing with false positives/negatives
--------------------------------------
......
Copyright 2004 Linus Torvalds
Copyright 2004 Pavel Machek <pavel@ucw.cz>
Copyright 2006 Bob Copeland <me@bobcopeland.com>
.. Copyright 2004 Linus Torvalds
.. Copyright 2004 Pavel Machek <pavel@ucw.cz>
.. Copyright 2006 Bob Copeland <me@bobcopeland.com>
Sparse
======
Sparse is a semantic checker for C programs; it can be used to find a
number of potential problems with kernel code. See
https://lwn.net/Articles/689907/ for an overview of sparse; this document
contains some kernel-specific sparse information.
Using sparse for typechecking
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----------------------------
"__bitwise" is a type attribute, so you have to do something like this:
"__bitwise" is a type attribute, so you have to do something like this::
typedef int __bitwise pm_request_t;
......@@ -20,13 +29,13 @@ but in this case we really _do_ want to force the conversion). And because
the enum values are all the same type, now "enum pm_request" will be that
type too.
And with gcc, all the __bitwise/__force stuff goes away, and it all ends
up looking just like integers to gcc.
And with gcc, all the "__bitwise"/"__force stuff" goes away, and it all
ends up looking just like integers to gcc.
Quite frankly, you don't need the enum there. The above all really just
boils down to one special "int __bitwise" type.
So the simpler way is to just do
So the simpler way is to just do::
typedef int __bitwise pm_request_t;
......@@ -50,7 +59,7 @@ __bitwise - noisy stuff; in particular, __le*/__be* are that. We really
don't want to drown in noise unless we'd explicitly asked for it.
Using sparse for lock checking
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
------------------------------
The following macros are undefined for gcc and defined during a sparse
run to use the "context" tracking feature of sparse, applied to
......@@ -69,22 +78,22 @@ annotation is needed. The tree annotations above are for cases where
sparse would otherwise report a context imbalance.
Getting sparse
~~~~~~~~~~~~~~
--------------
You can get latest released versions from the Sparse homepage at
https://sparse.wiki.kernel.org/index.php/Main_Page
Alternatively, you can get snapshots of the latest development version
of sparse using git to clone..
of sparse using git to clone::
git://git.kernel.org/pub/scm/devel/sparse/sparse.git
DaveJ has hourly generated tarballs of the git tree available at..
DaveJ has hourly generated tarballs of the git tree available at::
http://www.codemonkey.org.uk/projects/git-snapshots/sparse/
Once you have it, just do
Once you have it, just do::
make
make install
......@@ -92,7 +101,7 @@ Once you have it, just do
as a regular user, and it will install sparse in your ~/bin directory.
Using sparse
~~~~~~~~~~~~
------------
Do a kernel make with "make C=1" to run sparse on all the C files that get
recompiled, or use "make C=2" to run sparse on the files whether they need to
......@@ -101,7 +110,7 @@ have already built it.
The optional make variable CF can be used to pass arguments to sparse. The
build system passes -Wbitwise to sparse automatically. To perform endianness
checks, you may define __CHECK_ENDIAN__:
checks, you may define __CHECK_ENDIAN__::
make C=2 CF="-D__CHECK_ENDIAN__"
......
================================
Development tools for the kernel
================================
This document is a collection of documents about development tools that can
be used to work on the kernel. For now, the documents have been pulled
together without any significant effot to integrate them into a coherent
whole; patches welcome!
.. class:: toc-title
Table of contents
.. toctree::
:maxdepth: 2
coccinelle
sparse
kcov
gcov
kasan
ubsan
kmemleak
kmemcheck
gdb-kernel-debugging
Undefined Behavior Sanitizer - UBSAN
Overview
--------
The Undefined Behavior Sanitizer - UBSAN
========================================
UBSAN is a runtime undefined behaviour checker.
......@@ -10,11 +8,13 @@ Compiler inserts code that perform certain kinds of checks before operations
that may cause UB. If check fails (i.e. UB detected) __ubsan_handle_*
function called to print error message.
GCC has that feature since 4.9.x [1] (see -fsanitize=undefined option and
its suboptions). GCC 5.x has more checkers implemented [2].
GCC has that feature since 4.9.x [1_] (see ``-fsanitize=undefined`` option and
its suboptions). GCC 5.x has more checkers implemented [2_].
Report example
---------------
--------------
::
================================================================================
UBSAN: Undefined behaviour in ../include/linux/bitops.h:110:33
......@@ -47,29 +47,33 @@ Report example
Usage
-----
To enable UBSAN configure kernel with:
To enable UBSAN configure kernel with::
CONFIG_UBSAN=y
and to check the entire kernel:
and to check the entire kernel::
CONFIG_UBSAN_SANITIZE_ALL=y
To enable instrumentation for specific files or directories, add a line
similar to the following to the respective kernel Makefile:
For a single file (e.g. main.o):
UBSAN_SANITIZE_main.o := y
- For a single file (e.g. main.o)::
UBSAN_SANITIZE_main.o := y
For all files in one directory:
UBSAN_SANITIZE := y
- For all files in one directory::
UBSAN_SANITIZE := y
To exclude files from being instrumented even if
CONFIG_UBSAN_SANITIZE_ALL=y, use:
``CONFIG_UBSAN_SANITIZE_ALL=y``, use::
UBSAN_SANITIZE_main.o := n
and::
UBSAN_SANITIZE_main.o := n
and:
UBSAN_SANITIZE := n
UBSAN_SANITIZE := n
Detection of unaligned accesses controlled through the separate option -
CONFIG_UBSAN_ALIGNMENT. It's off by default on architectures that support
......@@ -80,5 +84,5 @@ reports.
References
----------
[1] - https://gcc.gnu.org/onlinedocs/gcc-4.9.0/gcc/Debugging-Options.html
[2] - https://gcc.gnu.org/onlinedocs/gcc/Debugging-Options.html
.. _1: https://gcc.gnu.org/onlinedocs/gcc-4.9.0/gcc/Debugging-Options.html
.. _2: https://gcc.gnu.org/onlinedocs/gcc/Debugging-Options.html
# -*- coding: utf-8 mode: conf-colon -*-
#
# docutils configuration file
# http://docutils.sourceforge.net/docs/user/config.html
[general]
halt_level: severe
\ No newline at end of file
# -*- coding: utf-8; mode: python -*-
project = "Linux GPU Driver Developer's Guide"
tags.add("subproject")
......@@ -12,3 +12,10 @@ Linux GPU Driver Developer's Guide
drm-uapi
i915
vga-switcheroo
.. only:: subproject
Indices
=======
* :ref:`genindex`
......@@ -6,22 +6,17 @@
Welcome to The Linux Kernel's documentation!
============================================
Nothing for you to see here *yet*. Please move along.
Contents:
.. toctree::
:maxdepth: 2
kernel-documentation
media/media_uapi
media/media_kapi
media/dvb-drivers/index
media/v4l-drivers/index
dev-tools/tools
media/index
gpu/index
Indices and tables
==================
* :ref:`genindex`
* :ref:`search`
......@@ -274,7 +274,44 @@ menuconfig:
This is similar to the simple config entry above, but it also gives a
hint to front ends, that all suboptions should be displayed as a
separate list of options.
separate list of options. To make sure all the suboptions will really
show up under the menuconfig entry and not outside of it, every item
from the <config options> list must depend on the menuconfig symbol.
In practice, this is achieved by using one of the next two constructs:
(1):
menuconfig M
if M
config C1
config C2
endif
(2):
menuconfig M
config C1
depends on M
config C2
depends on M
In the following examples (3) and (4), C1 and C2 still have the M
dependency, but will not appear under menuconfig M anymore, because
of C0, which doesn't depend on M:
(3):
menuconfig M
config C0
if M
config C1
config C2
endif
(4):
menuconfig M
config C0
config C1
depends on M
config C2
depends on M
choices:
......
......@@ -107,6 +107,35 @@ Here are some specific guidelines for the kernel documentation:
the order as encountered."), having the higher levels the same overall makes
it easier to follow the documents.
the C domain
------------
The `Sphinx C Domain`_ (name c) is suited for documentation of C API. E.g. a
function prototype:
.. code-block:: rst
.. c:function:: int ioctl( int fd, int request )
The C domain of the kernel-doc has some additional features. E.g. you can
*rename* the reference name of a function with a common name like ``open`` or
``ioctl``:
.. code-block:: rst
.. c:function:: int ioctl( int fd, int request )
:name: VIDIOC_LOG_STATUS
The func-name (e.g. ioctl) remains in the output but the ref-name changed from
``ioctl`` to ``VIDIOC_LOG_STATUS``. The index entry for this function is also
changed to ``VIDIOC_LOG_STATUS`` and the function can now referenced by:
.. code-block:: rst
:c:func:`VIDIOC_LOG_STATUS`
list tables
-----------
......@@ -366,8 +395,6 @@ Domain`_ references.
Cross-referencing from reStructuredText
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.. highlight:: none
To cross-reference the functions and types defined in the kernel-doc comments
from reStructuredText documents, please use the `Sphinx C Domain`_
references. For example::
......@@ -390,8 +417,6 @@ For further details, please refer to the `Sphinx C Domain`_ documentation.
Function documentation
----------------------
.. highlight:: c
The general format of a function and function-like macro kernel-doc comment is::
/**
......@@ -572,8 +597,6 @@ DocBook XML [DEPRECATED]
Converting DocBook to Sphinx
----------------------------
.. highlight:: none
Over time, we expect all of the documents under ``Documentation/DocBook`` to be
converted to Sphinx and reStructuredText. For most DocBook XML documents, a good
enough solution is to use the simple ``Documentation/sphinx/tmplcvt`` script,
......
......@@ -1688,7 +1688,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
intel_idle.max_cstate= [KNL,HW,ACPI,X86]
0 disables intel_idle and fall back on acpi_idle.
1 to 6 specify maximum depth of C-state.
1 to 9 specify maximum depth of C-state.
intel_pstate= [X86]
disable
......
......@@ -103,6 +103,16 @@ Note that the probed function's args may be passed on the stack
or in registers. The jprobe will work in either case, so long as the
handler's prototype matches that of the probed function.
Note that in some architectures (e.g.: arm64 and sparc64) the stack
copy is not done, as the actual location of stacked parameters may be
outside of a reasonable MAX_STACK_SIZE value and because that location
cannot be determined by the jprobes code. In this case the jprobes
user must be careful to make certain the calling signature of the
function does not cause parameters to be passed on the stack (e.g.:
more than eight function arguments, an argument of more than sixteen
bytes, or more than 64 bytes of argument data, depending on
architecture).
1.3 Return Probes
1.3.1 How Does a Return Probe Work?
......
......@@ -10,7 +10,8 @@ FILES = audio.h.rst ca.h.rst dmx.h.rst frontend.h.rst net.h.rst video.h.rst \
TARGETS := $(addprefix $(BUILDDIR)/, $(FILES))
htmldocs: $(BUILDDIR) ${TARGETS}
.PHONY: all
all: $(BUILDDIR) ${TARGETS}
$(BUILDDIR):
$(Q)mkdir -p $@
......
# -*- coding: utf-8; mode: python -*-
project = 'Linux Media Subsystem Documentation'
tags.add("subproject")
# -*- coding: utf-8; mode: python -*-
project = 'Linux Media Subsystem Documentation'
# It is possible to run Sphinx in nickpick mode with:
nitpicky = True
# within nit-picking build, do not refer to any intersphinx object
intersphinx_mapping = {}
# In nickpick mode, it will complain about lots of missing references that
#
# 1) are just typedefs like: bool, __u32, etc;
# 2) It will complain for things like: enum, NULL;
# 3) It will complain for symbols that should be on different
# books (but currently aren't ported to ReST)
#
# The list below has a list of such symbols to be ignored in nitpick mode
#
nitpick_ignore = [
("c:func", "clock_gettime"),
("c:func", "close"),
("c:func", "container_of"),
("c:func", "determine_valid_ioctls"),
("c:func", "ERR_PTR"),
("c:func", "ioctl"),
("c:func", "IS_ERR"),
("c:func", "mmap"),
("c:func", "open"),
("c:func", "pci_name"),
("c:func", "poll"),
("c:func", "PTR_ERR"),
("c:func", "read"),
("c:func", "release"),
("c:func", "set"),
("c:func", "struct fd_set"),
("c:func", "struct pollfd"),
("c:func", "usb_make_path"),
("c:func", "write"),
("c:type", "atomic_t"),
("c:type", "bool"),
("c:type", "buf_queue"),
("c:type", "device"),
("c:type", "device_driver"),
("c:type", "device_node"),
("c:type", "enum"),
("c:type", "file"),
("c:type", "i2c_adapter"),
("c:type", "i2c_board_info"),
("c:type", "i2c_client"),
("c:type", "ktime_t"),
("c:type", "led_classdev_flash"),
("c:type", "list_head"),
("c:type", "lock_class_key"),
("c:type", "module"),
("c:type", "mutex"),
("c:type", "pci_dev"),
("c:type", "pdvbdev"),
("c:type", "poll_table_struct"),
("c:type", "s32"),
("c:type", "s64"),
("c:type", "sd"),
("c:type", "spi_board_info"),
("c:type", "spi_device"),
("c:type", "spi_master"),
("c:type", "struct fb_fix_screeninfo"),
("c:type", "struct pollfd"),
("c:type", "struct timeval"),
("c:type", "struct video_capability"),
("c:type", "u16"),
("c:type", "u32"),
("c:type", "u64"),
("c:type", "u8"),
("c:type", "union"),
("c:type", "usb_device"),
("cpp:type", "boolean"),
("cpp:type", "fd"),
("cpp:type", "fd_set"),
("cpp:type", "int16_t"),
("cpp:type", "NULL"),
("cpp:type", "off_t"),
("cpp:type", "pollfd"),
("cpp:type", "size_t"),
("cpp:type", "ssize_t"),
("cpp:type", "timeval"),
("cpp:type", "__u16"),
("cpp:type", "__u32"),
("cpp:type", "__u64"),
("cpp:type", "uint16_t"),
("cpp:type", "uint32_t"),
("cpp:type", "video_system_t"),
]
Linux Media Subsystem Documentation
===================================
Contents:
.. toctree::
:maxdepth: 2
media_uapi
media_kapi
dvb-drivers/index
v4l-drivers/index
.. only:: subproject
Indices
=======
* :ref:`genindex`
......@@ -32,7 +32,7 @@ Arguments
Open flags. Access mode must be ``O_RDWR``.
When the ``O_NONBLOCK`` flag is given, the
:ref:`CEC_RECEIVE <CEC_RECEIVE>` and :ref:`CEC_DQEVENT <CEC_DQEVENT>` ioctls
:ref:`CEC_RECEIVE <CEC_RECEIVE>` and :c:func:`CEC_DQEVENT` ioctls
will return the ``EAGAIN`` error code when no message or event is available, and
ioctls :ref:`CEC_TRANSMIT <CEC_TRANSMIT>`,
:ref:`CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>` and
......
......@@ -15,7 +15,8 @@ CEC_DQEVENT - Dequeue a CEC event
Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct cec_event *argp )
.. c:function:: int ioctl( int fd, int request, struct cec_event *argp )
:name: CEC_DQEVENT
Arguments
=========
......@@ -38,7 +39,7 @@ Description
and is currently only available as a staging kernel module.
CEC devices can send asynchronous events. These can be retrieved by
calling :ref:`ioctl CEC_DQEVENT <CEC_DQEVENT>`. If the file descriptor is in
calling :c:func:`CEC_DQEVENT`. If the file descriptor is in
non-blocking mode and no event is pending, then it will return -1 and
set errno to the ``EAGAIN`` error code.
......
......@@ -45,9 +45,8 @@
#include <linux/serial.h>
/* RS485 ioctls: */
#define TIOCGRS485 0x542E
#define TIOCSRS485 0x542F
/* Include definition for RS485 ioctls: TIOCGRS485 and TIOCSRS485 */
#include <sys/ioctl.h>
/* Open your specific device (e.g., /dev/mydevice): */
int fd = open ("/dev/mydevice", O_RDWR);
......
......@@ -42,11 +42,12 @@
caption a.headerlink { opacity: 0; }
caption a.headerlink:hover { opacity: 1; }
/* inline literal: drop the borderbox and red color */
/* inline literal: drop the borderbox, padding and red color */
code, .rst-content tt, .rst-content code {
color: inherit;
border: none;
padding: unset;
background: inherit;
font-size: 85%;
}
......
# -*- coding: utf-8; mode: python -*-
u"""
cdomain
~~~~~~~
Replacement for the sphinx c-domain.
:copyright: Copyright (C) 2016 Markus Heiser
:license: GPL Version 2, June 1991 see Linux/COPYING for details.
List of customizations:
* Moved the *duplicate C object description* warnings for function
declarations in the nitpicky mode. See Sphinx documentation for
the config values for ``nitpick`` and ``nitpick_ignore``.
* Add option 'name' to the "c:function:" directive. With option 'name' the
ref-name of a function can be modified. E.g.::
.. c:function:: int ioctl( int fd, int request )
:name: VIDIOC_LOG_STATUS
The func-name (e.g. ioctl) remains in the output but the ref-name changed
from 'ioctl' to 'VIDIOC_LOG_STATUS'. The function is referenced by::
* :c:func:`VIDIOC_LOG_STATUS` or
* :any:`VIDIOC_LOG_STATUS` (``:any:`` needs sphinx 1.3)
"""
from docutils.parsers.rst import directives
from sphinx.domains.c import CObject as Base_CObject
from sphinx.domains.c import CDomain as Base_CDomain
__version__ = '1.0'
def setup(app):
app.override_domain(CDomain)
return dict(
version = __version__,
parallel_read_safe = True,
parallel_write_safe = True
)
class CObject(Base_CObject):
"""
Description of a C language object.
"""
option_spec = {
"name" : directives.unchanged
}
def handle_signature(self, sig, signode):
"""Transform a C signature into RST nodes."""
fullname = super(CObject, self).handle_signature(sig, signode)
if "name" in self.options:
if self.objtype == 'function':
fullname = self.options["name"]
else:
# FIXME: handle :name: value of other declaration types?
pass
return fullname
def add_target_and_index(self, name, sig, signode):
# for C API items we add a prefix since names are usually not qualified
# by a module name and so easily clash with e.g. section titles
targetname = 'c.' + name
if targetname not in self.state.document.ids:
signode['names'].append(targetname)
signode['ids'].append(targetname)
signode['first'] = (not self.names)
self.state.document.note_explicit_target(signode)
inv = self.env.domaindata['c']['objects']
if (name in inv and self.env.config.nitpicky):
if self.objtype == 'function':
if ('c:func', name) not in self.env.config.nitpick_ignore:
self.state_machine.reporter.warning(
'duplicate C object description of %s, ' % name +
'other instance in ' + self.env.doc2path(inv[name][0]),
line=self.lineno)
inv[name] = (self.env.docname, self.objtype)
indextext = self.get_index_text(name)
if indextext:
self.indexnode['entries'].append(('single', indextext,
targetname, '', None))
class CDomain(Base_CDomain):
"""C language domain."""
name = 'c'
label = 'C'
directives = {
'function': CObject,
'member': CObject,
'macro': CObject,
'type': CObject,
'var': CObject,
}
# -*- coding: utf-8; mode: python -*-
# pylint: disable=R0903, C0330, R0914, R0912, E0401
import os
import sys
from sphinx.util.pycompat import execfile_
# ------------------------------------------------------------------------------
def loadConfig(namespace):
# ------------------------------------------------------------------------------
u"""Load an additional configuration file into *namespace*.
The name of the configuration file is taken from the environment
``SPHINX_CONF``. The external configuration file extends (or overwrites) the
configuration values from the origin ``conf.py``. With this you are able to
maintain *build themes*. """
config_file = os.environ.get("SPHINX_CONF", None)
if (config_file is not None
and os.path.normpath(namespace["__file__"]) != os.path.normpath(config_file) ):
config_file = os.path.abspath(config_file)
if os.path.isfile(config_file):
sys.stdout.write("load additional sphinx-config: %s\n" % config_file)
config = namespace.copy()
config['__file__'] = config_file
execfile_(config_file, config)
del config['__file__']
namespace.update(config)
else:
sys.stderr.write("WARNING: additional sphinx-config not found: %s\n" % config_file)
......@@ -220,7 +220,7 @@ $data =~ s/\n\s+\n/\n\n/g;
#
# Add escape codes for special characters
#
$data =~ s,([\_\`\*\<\>\&\\\\:\/\|]),\\$1,g;
$data =~ s,([\_\`\*\<\>\&\\\\:\/\|\%\$\#\{\}\~\^]),\\$1,g;
$data =~ s,DEPRECATED,**DEPRECATED**,g;
......
......@@ -3124,7 +3124,7 @@ L: cocci@systeme.lip6.fr (moderated for non-subscribers)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git misc
W: http://coccinelle.lip6.fr/
S: Supported
F: Documentation/coccinelle.txt
F: Documentation/dev-tools/coccinelle.rst
F: scripts/coccinelle/
F: scripts/coccicheck
......@@ -5118,7 +5118,7 @@ GCOV BASED KERNEL PROFILING
M: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
S: Maintained
F: kernel/gcov/
F: Documentation/gcov.txt
F: Documentation/dev-tools/gcov.rst
GDT SCSI DISK ARRAY CONTROLLER DRIVER
M: Achim Leubner <achim_leubner@adaptec.com>
......@@ -6587,7 +6587,7 @@ L: kasan-dev@googlegroups.com
S: Maintained
F: arch/*/include/asm/kasan.h
F: arch/*/mm/kasan_init*
F: Documentation/kasan.txt
F: Documentation/dev-tools/kasan.rst
F: include/linux/kasan*.h
F: lib/test_kasan.c
F: mm/kasan/
......@@ -6803,7 +6803,7 @@ KMEMCHECK
M: Vegard Nossum <vegardno@ifi.uio.no>
M: Pekka Enberg <penberg@kernel.org>
S: Maintained
F: Documentation/kmemcheck.txt
F: Documentation/dev-tools/kmemcheck.rst
F: arch/x86/include/asm/kmemcheck.h
F: arch/x86/mm/kmemcheck/
F: include/linux/kmemcheck.h
......@@ -6812,7 +6812,7 @@ F: mm/kmemcheck.c
KMEMLEAK
M: Catalin Marinas <catalin.marinas@arm.com>
S: Maintained
F: Documentation/kmemleak.txt
F: Documentation/dev-tools/kmemleak.rst
F: include/linux/kmemleak.h
F: mm/kmemleak.c
F: mm/kmemleak-test.c
......
......@@ -1432,7 +1432,7 @@ $(help-board-dirs): help-%:
# Documentation targets
# ---------------------------------------------------------------------------
DOC_TARGETS := xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs epubdocs cleandocs
DOC_TARGETS := xmldocs sgmldocs psdocs latexdocs pdfdocs htmldocs mandocs installmandocs epubdocs cleandocs
PHONY += $(DOC_TARGETS)
$(DOC_TARGETS): scripts_basic FORCE
$(Q)$(MAKE) $(build)=scripts build_docproc build_check-lc_ctype
......
......@@ -229,10 +229,6 @@ CONFIGURING the kernel:
under some circumstances lead to problems: probing for a
nonexistent controller card may confuse your other controllers
- Compiling the kernel with "Processor type" set higher than 386
will result in a kernel that does NOT work on a 386. The
kernel will detect this on bootup, and give up.
- A kernel with math-emulation compiled in will still use the
coprocessor if one is present: the math emulation will just
never get used in that case. The kernel will be slightly larger,
......@@ -289,7 +285,7 @@ COMPILING the kernel:
LOCALVERSION can be set in the "General Setup" menu.
- In order to boot your new kernel, you'll need to copy the kernel
image (e.g. .../linux/arch/i386/boot/bzImage after compilation)
image (e.g. .../linux/arch/x86/boot/bzImage after compilation)
to the place where your regular bootable kernel is found.
- Booting a kernel directly from a floppy without the assistance of a
......@@ -391,7 +387,7 @@ IF SOMETHING GOES WRONG:
- Alternatively, you can use gdb on a running kernel. (read-only; i.e. you
cannot change values or set break points.) To do this, first compile the
kernel with -g; edit arch/i386/Makefile appropriately, then do a "make
kernel with -g; edit arch/x86/Makefile appropriately, then do a "make
clean". You'll also need to enable CONFIG_PROC_FS (via "make config").
After you've rebooted with the new kernel, do "gdb vmlinux /proc/kcore".
......
......@@ -1849,9 +1849,6 @@ sub output_function_rst(%) {
$count++;
$type = $args{'parametertypes'}{$parameter};
# RST doesn't like address_space tags at function prototypes
$type =~ s/__(user|kernel|iomem|percpu|pmem|rcu)\s*//;
if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) {
# pointer-to-function
print $1 . $parameter . ") (" . $2;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment