Skip to content

L
linux
Commit 442ee1fc authored by Stephan Gerhold's avatar Stephan Gerhold Committed by Bjorn Andersson
Browse files
Options

arm64: dts: qcom: Drop unneeded extra device-specific includes 

For some reason apq8016-sbc, apq8096-db820c, msm8916-mtp and msm8996-mtp
were added as separate .dts and .dtsi files where the first only contains
the model name and the latter contains most of the actual definitions.
Perhaps this was done with the expectation that there would be other
devices also making use of exactly the same. However, this has not
been the case until now and it also seems unlikely in the future.
Having the extra .dtsi only clutters the file list and provides
little benefit.

Move the contents of the .dtsi into the .dts file to make this consistent
with most other devices that simply define everything in the .dts.

There are no functional changes introduced by this patch:
The compiled ".dtb"s are completely identical.
Signed-off-by: default avatarStephan Gerhold <stephan@gerhold.net>
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211018133656.32649-1-stephan@gerhold.net
parent c86c43c4
Show whitespace changes
Inline Side-by-side
Showing with 1937 additions and 1969 deletions
arch/arm64/boot/dts/qcom/apq8016-sbc.dts
View file @ 442ee1fc
......@@ -5,9 +5,839 @@
/dts-v1/;
#include "apq8016-sbc.dtsi"
#include "msm8916-pm8916.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
#include <dt-bindings/sound/apq8016-lpass.h>
/ {
model = "Qualcomm Technologies, Inc. APQ 8016 SBC";
compatible = "qcom,apq8016-sbc", "qcom,apq8016";
aliases {
serial0 = &blsp1_uart2;
serial1 = &blsp1_uart1;
usid0 = &pm8916_0;
i2c0 = &blsp_i2c2;
i2c1 = &blsp_i2c6;
i2c3 = &blsp_i2c4;
spi0 = &blsp_spi5;
spi1 = &blsp_spi3;
};
chosen {
stdout-path = "serial0";
};
camera_vdddo_1v8: camera-vdddo-1v8 {
compatible = "regulator-fixed";
regulator-name = "camera_vdddo";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
camera_vdda_2v8: camera-vdda-2v8 {
compatible = "regulator-fixed";
regulator-name = "camera_vdda";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
camera_vddd_1v5: camera-vddd-1v5 {
compatible = "regulator-fixed";
regulator-name = "camera_vddd";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
};
reserved-memory {
ramoops@bff00000 {
compatible = "ramoops";
reg = <0x0 0xbff00000 0x0 0x100000>;
record-size = <0x20000>;
console-size = <0x20000>;
ftrace-size = <0x20000>;
};
};
usb2513 {
compatible = "smsc,usb3503";
reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>;
initial-mode = <1>;
};
usb_id: usb-id {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb_id_default>;
};
hdmi-out {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con: endpoint {
remote-endpoint = <&adv7533_out>;
};
};
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat;
pinctrl-names = "default";
pinctrl-0 = <&msm_key_volp_n_default>;
button@0 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
};
};
leds {
pinctrl-names = "default";
pinctrl-0 = <&msmgpio_leds>,
<&pm8916_gpios_leds>,
<&pm8916_mpps_leds>;
compatible = "gpio-leds";
led@1 {
label = "apq8016-sbc:green:user1";
gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
led@2 {
label = "apq8016-sbc:green:user2";
gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
default-state = "off";
};
led@3 {
label = "apq8016-sbc:green:user3";
gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc1";
default-state = "off";
};
led@4 {
label = "apq8016-sbc:green:user4";
gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "none";
panic-indicator;
default-state = "off";
};
led@5 {
label = "apq8016-sbc:yellow:wlan";
gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tx";
default-state = "off";
};
led@6 {
label = "apq8016-sbc:blue:bt";
gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "bluetooth-power";
default-state = "off";
};
};
};
&blsp_dma {
status = "okay";
};
&blsp_i2c2 {
/* On Low speed expansion */
status = "okay";
label = "LS-I2C0";
};
&blsp_i2c4 {
/* On High speed expansion */
status = "okay";
label = "HS-I2C2";
adv_bridge: bridge@39 {
status = "okay";
compatible = "adi,adv7533";
reg = <0x39>;
interrupt-parent = <&msmgpio>;
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
adi,dsi-lanes = <4>;
clocks = <&rpmcc RPM_SMD_BB_CLK2>;
clock-names = "cec";
pd-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
avdd-supply = <&pm8916_l6>;
v1p2-supply = <&pm8916_l6>;
v3p3-supply = <&pm8916_l17>;
pinctrl-names = "default","sleep";
pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
#sound-dai-cells = <1>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7533_in: endpoint {
remote-endpoint = <&dsi0_out>;
};
};
port@1 {
reg = <1>;
adv7533_out: endpoint {
remote-endpoint = <&hdmi_con>;
};
};
};
};
};
&blsp_i2c6 {
/* On Low speed expansion */
status = "okay";
label = "LS-I2C1";
};
&blsp_spi3 {
/* On High speed expansion */
status = "okay";
label = "HS-SPI1";
};
&blsp_spi5 {
/* On Low speed expansion */
status = "okay";
label = "LS-SPI0";
};
&blsp1_uart1 {
status = "okay";
label = "LS-UART0";
};
&blsp1_uart2 {
status = "okay";
label = "LS-UART1";
};
&camss {
status = "okay";
ports {
port@0 {
reg = <0>;
csiphy0_ep: endpoint {
clock-lanes = <1>;
data-lanes = <0 2>;
remote-endpoint = <&ov5640_ep>;
status = "okay";
};
};
};
};
&cci {
status = "okay";
};
&cci_i2c0 {
camera_rear@3b {
compatible = "ovti,ov5640";
reg = <0x3b>;
enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>;
reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&camera_rear_default>;
clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
clock-names = "xclk";
clock-frequency = <23880000>;
vdddo-supply = <&camera_vdddo_1v8>;
vdda-supply = <&camera_vdda_2v8>;
vddd-supply = <&camera_vddd_1v5>;
/* No camera mezzanine by default */
status = "disabled";
port {
ov5640_ep: endpoint {
clock-lanes = <1>;
data-lanes = <0 2>;
remote-endpoint = <&csiphy0_ep>;
};
};
};
};
&dsi0_out {
data-lanes = <0 1 2 3>;
remote-endpoint = <&adv7533_in>;
};
&lpass {
status = "okay";
};
&mdss {
status = "okay";
};
&mpss {
status = "okay";
firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn";
};
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
};
&pronto {
status = "okay";
firmware-name = "qcom/apq8016/wcnss.mbn";
};
&sdhc_1 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
};
&sdhc_2 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
};
&sound {
status = "okay";
pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
pinctrl-names = "default", "sleep";
qcom,model = "DB410c";
qcom,audio-routing =
"AMIC2", "MIC BIAS Internal2",
"AMIC3", "MIC BIAS External1";
external-dai-link@0 {
link-name = "ADV7533";
cpu {
sound-dai = <&lpass MI2S_QUATERNARY>;
};
codec {
sound-dai = <&adv_bridge 0>;
};
};
internal-codec-playback-dai-link@0 {
link-name = "WCD";
cpu {
sound-dai = <&lpass MI2S_PRIMARY>;
};
codec {
sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
};
};
internal-codec-capture-dai-link@0 {
link-name = "WCD-Capture";
cpu {
sound-dai = <&lpass MI2S_TERTIARY>;
};
codec {
sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
};
};
};
&usb {
status = "okay";
extcon = <&usb_id>, <&usb_id>;
pinctrl-names = "default", "device";
pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
};
&usb_hs_phy {
extcon = <&usb_id>;
};
&wcd_codec {
clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
clock-names = "mclk";
qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
};
&wcnss_ctrl {
firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin";
};
/* Enable CoreSight */
&cti0 { status = "okay"; };
&cti1 { status = "okay"; };
&cti12 { status = "okay"; };
&cti13 { status = "okay"; };
&cti14 { status = "okay"; };
&cti15 { status = "okay"; };
&debug0 { status = "okay"; };
&debug1 { status = "okay"; };
&debug2 { status = "okay"; };
&debug3 { status = "okay"; };
&etf { status = "okay"; };
&etm0 { status = "okay"; };
&etm1 { status = "okay"; };
&etm2 { status = "okay"; };
&etm3 { status = "okay"; };
&etr { status = "okay"; };
&funnel0 { status = "okay"; };
&funnel1 { status = "okay"; };
&replicator { status = "okay"; };
&stm { status = "okay"; };
&tpiu { status = "okay"; };
&smd_rpm_regulators {
vdd_l1_l2_l3-supply = <&pm8916_s3>;
vdd_l4_l5_l6-supply = <&pm8916_s4>;
vdd_l7-supply = <&pm8916_s4>;
s3 {
regulator-min-microvolt = <375000>;
regulator-max-microvolt = <1562000>;
};
s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
l1 {
regulator-min-microvolt = <375000>;
regulator-max-microvolt = <1525000>;
};
l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
l4 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l5 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l7 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l8 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l9 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l10 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l11 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
regulator-allow-set-load;
regulator-system-load = <200000>;
};
l12 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l13 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l14 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
/**
* 1.8v required on LS expansion
* for mezzanine boards
*/
l15 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
regulator-always-on;
};
l16 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l17 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
l18 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
};
/*
* 2mA drive strength is not enough when connecting multiple
* I2C devices with different pull up resistors.
*/
&i2c2_default {
drive-strength = <16>;
};
&i2c4_default {
drive-strength = <16>;
};
&i2c6_default {
drive-strength = <16>;
};
/*
* GPIO name legend: proper name = the GPIO line is used as GPIO
* NC = not connected (pin out but not routed from the chip to
* anything the board)
* "[PER]" = pin is muxed for [peripheral] (not GPIO)
* LSEC = Low Speed External Connector
* HSEC = High Speed External Connector
*
* Line names are taken from the schematic "DragonBoard410c"
* dated monday, august 31, 2015. Page 5 in particular.
*
* For the lines routed to the external connectors the
* lines are named after the 96Boards CE Specification 1.0,
* Appendix "Expansion Connector Signal Description".
*
* When the 96Board naming of a line and the schematic name of
* the same line are in conflict, the 96Board specification
* takes precedence, which means that the external UART on the
* LSEC is named UART0 while the schematic and SoC names this
* UART3. This is only for the informational lines i.e. "[FOO]",
* the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
* ones actually used for GPIO.
*/
&msmgpio {
gpio-line-names =
"[UART0_TX]", /* GPIO_0, LSEC pin 5 */
"[UART0_RX]", /* GPIO_1, LSEC pin 7 */
"[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */
"[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */
"[UART1_TX]", /* GPIO_4, LSEC pin 11 */
"[UART1_RX]", /* GPIO_5, LSEC pin 13 */
"[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */
"[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */
"[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */
"[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */
"[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */
"[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */
"GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */
"GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */
"[I2C3_SDA]", /* HSEC pin 38 */
"[I2C3_SCL]", /* HSEC pin 36 */
"[SPI0_MOSI]", /* LSEC pin 14 */
"[SPI0_MISO]", /* LSEC pin 10 */
"[SPI0_CS_N]", /* LSEC pin 12 */
"[SPI0_CLK]", /* LSEC pin 8 */
"HDMI_HPD_N", /* GPIO 20 */
"USR_LED_1_CTRL",
"[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */
"[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */
"GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */
"GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */
"[CSI0_MCLK]", /* HSEC pin 15 */
"[CSI1_MCLK]", /* HSEC pin 17 */
"GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */
"[I2C2_SDA]", /* HSEC pin 34 */
"[I2C2_SCL]", /* HSEC pin 32 */
"DSI2HDMI_INT_N",
"DSI_SW_SEL_APQ",
"GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */
"GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */
"GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */
"GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */
"FORCED_USB_BOOT",
"SD_CARD_DET_N",
"[WCSS_BT_SSBI]",
"[WCSS_WLAN_DATA_2]", /* GPIO 40 */
"[WCSS_WLAN_DATA_1]",
"[WCSS_WLAN_DATA_0]",
"[WCSS_WLAN_SET]",
"[WCSS_WLAN_CLK]",
"[WCSS_FM_SSBI]",
"[WCSS_FM_SDI]",
"[WCSS_BT_DAT_CTL]",
"[WCSS_BT_DAT_STB]",
"NC",
"NC", /* GPIO 50 */
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC", /* GPIO 60 */
"NC",
"NC",
"[CDC_PDM0_CLK]",
"[CDC_PDM0_SYNC]",
"[CDC_PDM0_TX0]",
"[CDC_PDM0_RX0]",
"[CDC_PDM0_RX1]",
"[CDC_PDM0_RX2]",
"GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */
"NC", /* GPIO 70 */
"NC",
"NC",
"NC",
"NC", /* GPIO 74 */
"NC",
"NC",
"NC",
"NC",
"NC",
"BOOT_CONFIG_0", /* GPIO 80 */
"BOOT_CONFIG_1",
"BOOT_CONFIG_2",
"BOOT_CONFIG_3",
"NC",
"NC",
"BOOT_CONFIG_5",
"NC",
"NC",
"NC",
"NC", /* GPIO 90 */
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC", /* GPIO 100 */
"NC",
"NC",
"NC",
"SSBI_GPS",
"NC",
"NC",
"KEY_VOLP_N",
"NC",
"NC",
"[LS_EXP_MI2S_WS]", /* GPIO 110 */
"NC",
"NC",
"[LS_EXP_MI2S_SCK]",
"[LS_EXP_MI2S_DATA0]",
"GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */
"NC",
"[DSI2HDMI_MI2S_WS]",
"[DSI2HDMI_MI2S_SCK]",
"[DSI2HDMI_MI2S_DATA0]",
"USR_LED_2_CTRL", /* GPIO 120 */
"SB_HS_ID";
msmgpio_leds: msmgpio-leds {
pins = "gpio21", "gpio120";
function = "gpio";
output-low;
};
usb_id_default: usb-id-default {
pins = "gpio121";
function = "gpio";
drive-strength = <8>;
input-enable;
bias-pull-up;
};
adv7533_int_active: adv533-int-active {
pins = "gpio31";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
adv7533_int_suspend: adv7533-int-suspend {
pins = "gpio31";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
adv7533_switch_active: adv7533-switch-active {
pins = "gpio32";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
adv7533_switch_suspend: adv7533-switch-suspend {
pins = "gpio32";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
msm_key_volp_n_default: msm-key-volp-n-default {
pins = "gpio107";
function = "gpio";
drive-strength = <8>;
input-enable;
bias-pull-up;
};
};
&pm8916_gpios {
gpio-line-names =
"USR_LED_3_CTRL",
"USR_LED_4_CTRL",
"USB_HUB_RESET_N_PM",
"USB_SW_SEL_PM";
usb_hub_reset_pm: usb-hub-reset-pm {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
input-disable;
output-high;
};
usb_hub_reset_pm_device: usb-hub-reset-pm-device {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
};
usb_sw_sel_pm: usb-sw-sel-pm {
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
power-source = <PM8916_GPIO_VPH>;
input-disable;
output-high;
};
usb_sw_sel_pm_device: usb-sw-sel-pm-device {
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
power-source = <PM8916_GPIO_VPH>;
input-disable;
output-low;
};
pm8916_gpios_leds: pm8916-gpios-leds {
pins = "gpio1", "gpio2";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
};
};
&pm8916_mpps {
gpio-line-names =
"VDD_PX_BIAS",
"WLAN_LED_CTRL",
"BT_LED_CTRL",
"GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */
pinctrl-names = "default";
pinctrl-0 = <&ls_exp_gpio_f>;
ls_exp_gpio_f: pm8916-mpp4-state {
pins = "mpp4";
function = "digital";
output-low;
power-source = <PM8916_MPP_L5>; // 1.8V
};
pm8916_mpps_leds: pm8916-mpps-state {
pins = "mpp2", "mpp3";
function = "digital";
output-low;
};
};
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi deleted 100644 → 0
View file @ c86c43c4
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*/
#include "msm8916-pm8916.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
#include <dt-bindings/sound/apq8016-lpass.h>
/ {
aliases {
serial0 = &blsp1_uart2;
serial1 = &blsp1_uart1;
usid0 = &pm8916_0;
i2c0 = &blsp_i2c2;
i2c1 = &blsp_i2c6;
i2c3 = &blsp_i2c4;
spi0 = &blsp_spi5;
spi1 = &blsp_spi3;
};
chosen {
stdout-path = "serial0";
};
camera_vdddo_1v8: camera-vdddo-1v8 {
compatible = "regulator-fixed";
regulator-name = "camera_vdddo";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
camera_vdda_2v8: camera-vdda-2v8 {
compatible = "regulator-fixed";
regulator-name = "camera_vdda";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
camera_vddd_1v5: camera-vddd-1v5 {
compatible = "regulator-fixed";
regulator-name = "camera_vddd";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
};
reserved-memory {
ramoops@bff00000 {
compatible = "ramoops";
reg = <0x0 0xbff00000 0x0 0x100000>;
record-size = <0x20000>;
console-size = <0x20000>;
ftrace-size = <0x20000>;
};
};
usb2513 {
compatible = "smsc,usb3503";
reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>;
initial-mode = <1>;
};
usb_id: usb-id {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb_id_default>;
};
hdmi-out {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con: endpoint {
remote-endpoint = <&adv7533_out>;
};
};
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat;
pinctrl-names = "default";
pinctrl-0 = <&msm_key_volp_n_default>;
button@0 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
};
};
leds {
pinctrl-names = "default";
pinctrl-0 = <&msmgpio_leds>,
<&pm8916_gpios_leds>,
<&pm8916_mpps_leds>;
compatible = "gpio-leds";
led@1 {
label = "apq8016-sbc:green:user1";
gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
led@2 {
label = "apq8016-sbc:green:user2";
gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
default-state = "off";
};
led@3 {
label = "apq8016-sbc:green:user3";
gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc1";
default-state = "off";
};
led@4 {
label = "apq8016-sbc:green:user4";
gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "none";
panic-indicator;
default-state = "off";
};
led@5 {
label = "apq8016-sbc:yellow:wlan";
gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tx";
default-state = "off";
};
led@6 {
label = "apq8016-sbc:blue:bt";
gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "bluetooth-power";
default-state = "off";
};
};
};
&blsp_dma {
status = "okay";
};
&blsp_i2c2 {
/* On Low speed expansion */
status = "okay";
label = "LS-I2C0";
};
&blsp_i2c4 {
/* On High speed expansion */
status = "okay";
label = "HS-I2C2";
adv_bridge: bridge@39 {
status = "okay";
compatible = "adi,adv7533";
reg = <0x39>;
interrupt-parent = <&msmgpio>;
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
adi,dsi-lanes = <4>;
clocks = <&rpmcc RPM_SMD_BB_CLK2>;
clock-names = "cec";
pd-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
avdd-supply = <&pm8916_l6>;
v1p2-supply = <&pm8916_l6>;
v3p3-supply = <&pm8916_l17>;
pinctrl-names = "default","sleep";
pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
#sound-dai-cells = <1>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7533_in: endpoint {
remote-endpoint = <&dsi0_out>;
};
};
port@1 {
reg = <1>;
adv7533_out: endpoint {
remote-endpoint = <&hdmi_con>;
};
};
};
};
};
&blsp_i2c6 {
/* On Low speed expansion */
status = "okay";
label = "LS-I2C1";
};
&blsp_spi3 {
/* On High speed expansion */
status = "okay";
label = "HS-SPI1";
};
&blsp_spi5 {
/* On Low speed expansion */
status = "okay";
label = "LS-SPI0";
};
&blsp1_uart1 {
status = "okay";
label = "LS-UART0";
};
&blsp1_uart2 {
status = "okay";
label = "LS-UART1";
};
&camss {
status = "okay";
ports {
port@0 {
reg = <0>;
csiphy0_ep: endpoint {
clock-lanes = <1>;
data-lanes = <0 2>;
remote-endpoint = <&ov5640_ep>;
status = "okay";
};
};
};
};
&cci {
status = "okay";
};
&cci_i2c0 {
camera_rear@3b {
compatible = "ovti,ov5640";
reg = <0x3b>;
enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>;
reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&camera_rear_default>;
clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
clock-names = "xclk";
clock-frequency = <23880000>;
vdddo-supply = <&camera_vdddo_1v8>;
vdda-supply = <&camera_vdda_2v8>;
vddd-supply = <&camera_vddd_1v5>;
/* No camera mezzanine by default */
status = "disabled";
port {
ov5640_ep: endpoint {
clock-lanes = <1>;
data-lanes = <0 2>;
remote-endpoint = <&csiphy0_ep>;
};
};
};
};
&dsi0_out {
data-lanes = <0 1 2 3>;
remote-endpoint = <&adv7533_in>;
};
&lpass {
status = "okay";
};
&mdss {
status = "okay";
};
&mpss {
status = "okay";
firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn";
};
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
};
&pronto {
status = "okay";
firmware-name = "qcom/apq8016/wcnss.mbn";
};
&sdhc_1 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
};
&sdhc_2 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
};
&sound {
status = "okay";
pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
pinctrl-names = "default", "sleep";
qcom,model = "DB410c";
qcom,audio-routing =
"AMIC2", "MIC BIAS Internal2",
"AMIC3", "MIC BIAS External1";
external-dai-link@0 {
link-name = "ADV7533";
cpu {
sound-dai = <&lpass MI2S_QUATERNARY>;
};
codec {
sound-dai = <&adv_bridge 0>;
};
};
internal-codec-playback-dai-link@0 {
link-name = "WCD";
cpu {
sound-dai = <&lpass MI2S_PRIMARY>;
};
codec {
sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
};
};
internal-codec-capture-dai-link@0 {
link-name = "WCD-Capture";
cpu {
sound-dai = <&lpass MI2S_TERTIARY>;
};
codec {
sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
};
};
};
&usb {
status = "okay";
extcon = <&usb_id>, <&usb_id>;
pinctrl-names = "default", "device";
pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
};
&usb_hs_phy {
extcon = <&usb_id>;
};
&wcd_codec {
clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
clock-names = "mclk";
qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
};
&wcnss_ctrl {
firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin";
};
/* Enable CoreSight */
&cti0 { status = "okay"; };
&cti1 { status = "okay"; };
&cti12 { status = "okay"; };
&cti13 { status = "okay"; };
&cti14 { status = "okay"; };
&cti15 { status = "okay"; };
&debug0 { status = "okay"; };
&debug1 { status = "okay"; };
&debug2 { status = "okay"; };
&debug3 { status = "okay"; };
&etf { status = "okay"; };
&etm0 { status = "okay"; };
&etm1 { status = "okay"; };
&etm2 { status = "okay"; };
&etm3 { status = "okay"; };
&etr { status = "okay"; };
&funnel0 { status = "okay"; };
&funnel1 { status = "okay"; };
&replicator { status = "okay"; };
&stm { status = "okay"; };
&tpiu { status = "okay"; };
&smd_rpm_regulators {
vdd_l1_l2_l3-supply = <&pm8916_s3>;
vdd_l4_l5_l6-supply = <&pm8916_s4>;
vdd_l7-supply = <&pm8916_s4>;
s3 {
regulator-min-microvolt = <375000>;
regulator-max-microvolt = <1562000>;
};
s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
l1 {
regulator-min-microvolt = <375000>;
regulator-max-microvolt = <1525000>;
};
l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
l4 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l5 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l7 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l8 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l9 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l10 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l11 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
regulator-allow-set-load;
regulator-system-load = <200000>;
};
l12 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l13 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l14 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
/**
* 1.8v required on LS expansion
* for mezzanine boards
*/
l15 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
regulator-always-on;
};
l16 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l17 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
l18 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
};
/*
* 2mA drive strength is not enough when connecting multiple
* I2C devices with different pull up resistors.
*/
&i2c2_default {
drive-strength = <16>;
};
&i2c4_default {
drive-strength = <16>;
};
&i2c6_default {
drive-strength = <16>;
};
/*
* GPIO name legend: proper name = the GPIO line is used as GPIO
* NC = not connected (pin out but not routed from the chip to
* anything the board)
* "[PER]" = pin is muxed for [peripheral] (not GPIO)
* LSEC = Low Speed External Connector
* HSEC = High Speed External Connector
*
* Line names are taken from the schematic "DragonBoard410c"
* dated monday, august 31, 2015. Page 5 in particular.
*
* For the lines routed to the external connectors the
* lines are named after the 96Boards CE Specification 1.0,
* Appendix "Expansion Connector Signal Description".
*
* When the 96Board naming of a line and the schematic name of
* the same line are in conflict, the 96Board specification
* takes precedence, which means that the external UART on the
* LSEC is named UART0 while the schematic and SoC names this
* UART3. This is only for the informational lines i.e. "[FOO]",
* the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
* ones actually used for GPIO.
*/
&msmgpio {
gpio-line-names =
"[UART0_TX]", /* GPIO_0, LSEC pin 5 */
"[UART0_RX]", /* GPIO_1, LSEC pin 7 */
"[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */
"[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */
"[UART1_TX]", /* GPIO_4, LSEC pin 11 */
"[UART1_RX]", /* GPIO_5, LSEC pin 13 */
"[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */
"[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */
"[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */
"[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */
"[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */
"[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */
"GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */
"GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */
"[I2C3_SDA]", /* HSEC pin 38 */
"[I2C3_SCL]", /* HSEC pin 36 */
"[SPI0_MOSI]", /* LSEC pin 14 */
"[SPI0_MISO]", /* LSEC pin 10 */
"[SPI0_CS_N]", /* LSEC pin 12 */
"[SPI0_CLK]", /* LSEC pin 8 */
"HDMI_HPD_N", /* GPIO 20 */
"USR_LED_1_CTRL",
"[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */
"[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */
"GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */
"GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */
"[CSI0_MCLK]", /* HSEC pin 15 */
"[CSI1_MCLK]", /* HSEC pin 17 */
"GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */
"[I2C2_SDA]", /* HSEC pin 34 */
"[I2C2_SCL]", /* HSEC pin 32 */
"DSI2HDMI_INT_N",
"DSI_SW_SEL_APQ",
"GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */
"GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */
"GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */
"GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */
"FORCED_USB_BOOT",
"SD_CARD_DET_N",
"[WCSS_BT_SSBI]",
"[WCSS_WLAN_DATA_2]", /* GPIO 40 */
"[WCSS_WLAN_DATA_1]",
"[WCSS_WLAN_DATA_0]",
"[WCSS_WLAN_SET]",
"[WCSS_WLAN_CLK]",
"[WCSS_FM_SSBI]",
"[WCSS_FM_SDI]",
"[WCSS_BT_DAT_CTL]",
"[WCSS_BT_DAT_STB]",
"NC",
"NC", /* GPIO 50 */
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC", /* GPIO 60 */
"NC",
"NC",
"[CDC_PDM0_CLK]",
"[CDC_PDM0_SYNC]",
"[CDC_PDM0_TX0]",
"[CDC_PDM0_RX0]",
"[CDC_PDM0_RX1]",
"[CDC_PDM0_RX2]",
"GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */
"NC", /* GPIO 70 */
"NC",
"NC",
"NC",
"NC", /* GPIO 74 */
"NC",
"NC",
"NC",
"NC",
"NC",
"BOOT_CONFIG_0", /* GPIO 80 */
"BOOT_CONFIG_1",
"BOOT_CONFIG_2",
"BOOT_CONFIG_3",
"NC",
"NC",
"BOOT_CONFIG_5",
"NC",
"NC",
"NC",
"NC", /* GPIO 90 */
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC", /* GPIO 100 */
"NC",
"NC",
"NC",
"SSBI_GPS",
"NC",
"NC",
"KEY_VOLP_N",
"NC",
"NC",
"[LS_EXP_MI2S_WS]", /* GPIO 110 */
"NC",
"NC",
"[LS_EXP_MI2S_SCK]",
"[LS_EXP_MI2S_DATA0]",
"GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */
"NC",
"[DSI2HDMI_MI2S_WS]",
"[DSI2HDMI_MI2S_SCK]",
"[DSI2HDMI_MI2S_DATA0]",
"USR_LED_2_CTRL", /* GPIO 120 */
"SB_HS_ID";
msmgpio_leds: msmgpio-leds {
pins = "gpio21", "gpio120";
function = "gpio";
output-low;
};
usb_id_default: usb-id-default {
pins = "gpio121";
function = "gpio";
drive-strength = <8>;
input-enable;
bias-pull-up;
};
adv7533_int_active: adv533-int-active {
pins = "gpio31";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
adv7533_int_suspend: adv7533-int-suspend {
pins = "gpio31";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
adv7533_switch_active: adv7533-switch-active {
pins = "gpio32";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
adv7533_switch_suspend: adv7533-switch-suspend {
pins = "gpio32";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
msm_key_volp_n_default: msm-key-volp-n-default {
pins = "gpio107";
function = "gpio";
drive-strength = <8>;
input-enable;
bias-pull-up;
};
};
&pm8916_gpios {
gpio-line-names =
"USR_LED_3_CTRL",
"USR_LED_4_CTRL",
"USB_HUB_RESET_N_PM",
"USB_SW_SEL_PM";
usb_hub_reset_pm: usb-hub-reset-pm {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
input-disable;
output-high;
};
usb_hub_reset_pm_device: usb-hub-reset-pm-device {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
};
usb_sw_sel_pm: usb-sw-sel-pm {
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
power-source = <PM8916_GPIO_VPH>;
input-disable;
output-high;
};
usb_sw_sel_pm_device: usb-sw-sel-pm-device {
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
power-source = <PM8916_GPIO_VPH>;
input-disable;
output-low;
};
pm8916_gpios_leds: pm8916-gpios-leds {
pins = "gpio1", "gpio2";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
};
};
&pm8916_mpps {
gpio-line-names =
"VDD_PX_BIAS",
"WLAN_LED_CTRL",
"BT_LED_CTRL",
"GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */
pinctrl-names = "default";
pinctrl-0 = <&ls_exp_gpio_f>;
ls_exp_gpio_f: pm8916-mpp4-state {
pins = "mpp4";
function = "digital";
output-low;
power-source = <PM8916_MPP_L5>; // 1.8V
};
pm8916_mpps_leds: pm8916-mpps-state {
pins = "mpp2", "mpp3";
function = "digital";
output-low;
};
};
arch/arm64/boot/dts/qcom/apq8096-db820c.dts
View file @ 442ee1fc
......@@ -5,9 +5,1077 @@
/dts-v1/;
#include "apq8096-db820c.dtsi"
#include "msm8996.dtsi"
#include "pm8994.dtsi"
#include "pmi8994.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/sound/qcom,q6asm.h>
/*
* GPIO name legend: proper name = the GPIO line is used as GPIO
* NC = not connected (pin out but not routed from the chip to
* anything the board)
* "[PER]" = pin is muxed for [peripheral] (not GPIO)
* LSEC = Low Speed External Connector
* P HSEC = Primary High Speed External Connector
* S HSEC = Secondary High Speed External Connector
* J14 = Camera Connector
* TP = Test Points
*
* Line names are taken from the schematic "DragonBoard 820c",
* drawing no: LM25-P2751-1
*
* For the lines routed to the external connectors the
* lines are named after the 96Boards CE Specification 1.0,
* Appendix "Expansion Connector Signal Description".
*
* When the 96Board naming of a line and the schematic name of
* the same line are in conflict, the 96Board specification
* takes precedence, which means that the external UART on the
* LSEC is named UART0 while the schematic and SoC names this
* UART3. This is only for the informational lines i.e. "[FOO]",
* the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
* ones actually used for GPIO.
*/
/ {
model = "Qualcomm Technologies, Inc. DB820c";
compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096";
aliases {
serial0 = &blsp2_uart2;
serial1 = &blsp2_uart3;
serial2 = &blsp1_uart2;
i2c0 = &blsp1_i2c3;
i2c1 = &blsp2_i2c1;
i2c2 = &blsp2_i2c1;
spi0 = &blsp1_spi1;
spi1 = &blsp2_spi6;
};
chosen {
stdout-path = "serial0:115200n8";
};
clocks {
compatible = "simple-bus";
divclk4: divclk4 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "divclk4";
pinctrl-names = "default";
pinctrl-0 = <&divclk4_pin_a>;
};
div1_mclk: divclk1 {
compatible = "gpio-gate-clock";
pinctrl-0 = <&audio_mclk>;
pinctrl-names = "default";
clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
#clock-cells = <0>;
enable-gpios = <&pm8994_gpios 15 0>;
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat;
pinctrl-names = "default";
pinctrl-0 = <&volume_up_gpio>;
button@0 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
};
};
usb2_id: usb2-id {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb2_vbus_det_gpio>;
};
usb3_id: usb3-id {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb3_vbus_det_gpio>;
};
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
};
wlan_en: wlan-en-1-8v {
pinctrl-names = "default";
pinctrl-0 = <&wlan_en_gpios>;
compatible = "regulator-fixed";
regulator-name = "wlan-en-regulator";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&pm8994_gpios 8 0>;
/* WLAN card specific delay */
startup-delay-us = <70000>;
enable-active-high;
};
};
&blsp1_i2c3 {
/* On Low speed expansion */
label = "LS-I2C0";
status = "okay";
};
&blsp1_spi1 {
/* On Low speed expansion */
label = "LS-SPI0";
status = "okay";
};
&blsp1_uart2 {
label = "BT-UART";
status = "okay";
bluetooth {
compatible = "qcom,qca6174-bt";
/* bt_disable_n gpio */
enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
clocks = <&divclk4>;
};
};
&adsp_pil {
status = "okay";
};
&blsp2_i2c1 {
/* On High speed expansion */
label = "HS-I2C2";
status = "okay";
};
&blsp2_i2c1 {
/* On Low speed expansion */
label = "LS-I2C1";
status = "okay";
};
&blsp2_spi6 {
/* On High speed expansion */
label = "HS-SPI1";
status = "okay";
};
&blsp2_uart2 {
label = "LS-UART1";
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_uart2_2pins_default>;
pinctrl-1 = <&blsp2_uart2_2pins_sleep>;
};
&blsp2_uart3 {
label = "LS-UART0";
status = "disabled";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_uart3_4pins_default>;
pinctrl-1 = <&blsp2_uart3_4pins_sleep>;
};
&camss {
vdda-supply = <&vreg_l2a_1p25>;
};
&gpu {
status = "okay";
};
&hdmi {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
core-vdda-supply = <&vreg_l12a_1p8>;
core-vcc-supply = <&vreg_s4a_1p8>;
};
&hdmi_phy {
status = "okay";
vddio-supply = <&vreg_l12a_1p8>;
vcca-supply = <&vreg_l28a_0p925>;
#phy-cells = <0>;
};
&hsusb_phy1 {
status = "okay";
vdda-pll-supply = <&vreg_l12a_1p8>;
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
};
&hsusb_phy2 {
status = "okay";
vdda-pll-supply = <&vreg_l12a_1p8>;
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
};
&mdp {
status = "okay";
};
&mdss {
status = "okay";
};
&mmcc {
vdd-gfx-supply = <&vdd_gfx>;
};
&pm8994_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
};
&tlmm {
gpio-line-names =
"[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
"[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
"[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */
"[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */
"[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */
"[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */
"[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */
"[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */
"GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */
"TP93", /* GPIO_9 */
"GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */
"[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */
"NC", /* GPIO_12 */
"[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */
"[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */
"[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */
"TP99", /* GPIO_16 */
"[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */
"[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */
"[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */
"[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */
"FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */
"FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */
"GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */
"GPIO-D", /* GPIO_24, LSEC pin 26 */
"GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */
"GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */
"BLSP6_I2C_SDA", /* GPIO_27 */
"BLSP6_I2C_SCL", /* GPIO_28 */
"GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */
"GPIO30", /* GPIO_30, S HSEC pin 4 */
"HDMI_CEC", /* GPIO_31 */
"HDMI_DDC_CLOCK", /* GPIO_32 */
"HDMI_DDC_DATA", /* GPIO_33 */
"HDMI_HOT_PLUG_DETECT", /* GPIO_34 */
"PCIE0_RST_N", /* GPIO_35 */
"PCIE0_CLKREQ_N", /* GPIO_36 */
"PCIE0_WAKE", /* GPIO_37 */
"SD_CARD_DET_N", /* GPIO_38 */
"TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */
"W_DISABLE_N", /* GPIO_40 */
"[BLSP9_UART_TX]", /* GPIO_41 */
"[BLSP9_UART_RX]", /* GPIO_42 */
"[BLSP2_UART_CTS_N]", /* GPIO_43 */
"[BLSP2_UART_RFR_N]", /* GPIO_44 */
"[BLSP3_UART_TX]", /* GPIO_45 */
"[BLSP3_UART_RX]", /* GPIO_46 */
"[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */
"[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */
"[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */
"[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */
"[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */
"[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */
"[CODEC_INT1_N]", /* GPIO_53 */
"[CODEC_INT2_N]", /* GPIO_54 */
"[BLSP7_I2C_SDA]", /* GPIO_55 */
"[BLSP7_I2C_SCL]", /* GPIO_56 */
"MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */
"[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */
"[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */
"[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */
"[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */
"GPIO-E", /* GPIO_62, LSEC pin 27 */
"TP87", /* GPIO_63 */
"[CODEC_RST_N]", /* GPIO_64 */
"[PCM1_CLK]", /* GPIO_65 */
"[PCM1_SYNC]", /* GPIO_66 */
"[PCM1_DIN]", /* GPIO_67 */
"[PCM1_DOUT]", /* GPIO_68 */
"AUDIO_REF_CLK", /* GPIO_69 */
"SLIMBUS_CLK", /* GPIO_70 */
"SLIMBUS_DATA0", /* GPIO_71 */
"SLIMBUS_DATA1", /* GPIO_72 */
"NC", /* GPIO_73 */
"NC", /* GPIO_74 */
"NC", /* GPIO_75 */
"NC", /* GPIO_76 */
"TP94", /* GPIO_77 */
"NC", /* GPIO_78 */
"TP95", /* GPIO_79 */
"GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */
"TP88", /* GPIO_81 */
"TP89", /* GPIO_82 */
"TP90", /* GPIO_83 */
"TP91", /* GPIO_84 */
"[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */
"[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */
"[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */
"[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */
"TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */
"TSIF1_EN", /* GPIO_90, S HSEC pin 46 */
"TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */
"NC", /* GPIO_92 */
"TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */
"TSIF2_EN", /* GPIO_94, S HSEC pin 56 */
"TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */
"TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */
"NC", /* GPIO_97 */
"CAM1_STANDBY_N", /* GPIO_98 */
"NC", /* GPIO_99 */
"NC", /* GPIO_100 */
"[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */
"BOOT_CONFIG1", /* GPIO_102 */
"USB_HUB_RESET", /* GPIO_103 */
"CAM1_RST_N", /* GPIO_104 */
"NC", /* GPIO_105 */
"NC", /* GPIO_106 */
"NC", /* GPIO_107 */
"NC", /* GPIO_108 */
"NC", /* GPIO_109 */
"NC", /* GPIO_110 */
"NC", /* GPIO_111 */
"NC", /* GPIO_112 */
"PMI8994_BUA", /* GPIO_113 */
"PCIE2_RST_N", /* GPIO_114 */
"PCIE2_CLKREQ_N", /* GPIO_115 */
"PCIE2_WAKE", /* GPIO_116 */
"SSC_IRQ_0", /* GPIO_117 */
"SSC_IRQ_1", /* GPIO_118 */
"SSC_IRQ_2", /* GPIO_119 */
"NC", /* GPIO_120 */
"GPIO121", /* GPIO_121, S HSEC pin 2 */
"NC", /* GPIO_122 */
"SSC_IRQ_6", /* GPIO_123 */
"SSC_IRQ_7", /* GPIO_124 */
"GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */
"BOOT_CONFIG5", /* GPIO_126 */
"NC", /* GPIO_127 */
"NC", /* GPIO_128 */
"BOOT_CONFIG7", /* GPIO_129 */
"PCIE1_RST_N", /* GPIO_130 */
"PCIE1_CLKREQ_N", /* GPIO_131 */
"PCIE1_WAKE", /* GPIO_132 */
"GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */
"NC", /* GPIO_134 */
"NC", /* GPIO_135 */
"BOOT_CONFIG8", /* GPIO_136 */
"NC", /* GPIO_137 */
"NC", /* GPIO_138 */
"GPS_SSBI2", /* GPIO_139 */
"GPS_SSBI1", /* GPIO_140 */
"NC", /* GPIO_141 */
"NC", /* GPIO_142 */
"NC", /* GPIO_143 */
"BOOT_CONFIG6", /* GPIO_144 */
"NC", /* GPIO_145 */
"NC", /* GPIO_146 */
"NC", /* GPIO_147 */
"NC", /* GPIO_148 */
"NC"; /* GPIO_149 */
sdc2_cd_on: sdc2_cd_on {
mux {
pins = "gpio38";
function = "gpio";
};
config {
pins = "gpio38";
bias-pull-up; /* pull up */
drive-strength = <16>; /* 16 MA */
};
};
sdc2_cd_off: sdc2_cd_off {
mux {
pins = "gpio38";
function = "gpio";
};
config {
pins = "gpio38";
bias-pull-up; /* pull up */
drive-strength = <2>; /* 2 MA */
};
};
hdmi_hpd_active: hdmi_hpd_active {
mux {
pins = "gpio34";
function = "hdmi_hot";
};
config {
pins = "gpio34";
bias-pull-down;
drive-strength = <16>;
};
};
hdmi_hpd_suspend: hdmi_hpd_suspend {
mux {
pins = "gpio34";
function = "hdmi_hot";
};
config {
pins = "gpio34";
bias-pull-down;
drive-strength = <2>;
};
};
hdmi_ddc_active: hdmi_ddc_active {
mux {
pins = "gpio32", "gpio33";
function = "hdmi_ddc";
};
config {
pins = "gpio32", "gpio33";
drive-strength = <2>;
bias-pull-up;
};
};
hdmi_ddc_suspend: hdmi_ddc_suspend {
mux {
pins = "gpio32", "gpio33";
function = "hdmi_ddc";
};
config {
pins = "gpio32", "gpio33";
drive-strength = <2>;
bias-pull-down;
};
};
};
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
vddpe-3v3-supply = <&wlan_en>;
vdda-supply = <&vreg_l28a_0p925>;
};
&pcie1 {
status = "okay";
perst-gpio = <&tlmm 130 GPIO_ACTIVE_LOW>;
vdda-supply = <&vreg_l28a_0p925>;
};
&pcie2 {
status = "okay";
perst-gpio = <&tlmm 114 GPIO_ACTIVE_LOW>;
vdda-supply = <&vreg_l28a_0p925>;
};
&pcie_phy {
status = "okay";
vdda-phy-supply = <&vreg_l28a_0p925>;
vdda-pll-supply = <&vreg_l12a_1p8>;
};
&pm8994_gpios {
gpio-line-names =
"NC",
"KEY_VOLP_N",
"NC",
"BL1_PWM",
"GPIO-F", /* BL0_PWM, LSEC pin 28 */
"BL1_EN",
"NC",
"WLAN_EN",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"DIVCLK1",
"DIVCLK2",
"DIVCLK3",
"DIVCLK4",
"BT_EN",
"PMIC_SLB",
"PMIC_BUA",
"USB_VBUS_DET";
pinctrl-names = "default";
pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>;
ls_exp_gpio_f: pm8994_gpio5 {
pinconf {
pins = "gpio5";
output-low;
power-source = <2>; // PM8994_GPIO_S4, 1.8V
};
};
bt_en_gpios: bt_en_gpios {
pinconf {
pins = "gpio19";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
power-source = <PM8994_GPIO_S4>; // 1.8V
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
bias-pull-down;
};
};
wlan_en_gpios: wlan_en_gpios {
pinconf {
pins = "gpio8";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
power-source = <PM8994_GPIO_S4>; // 1.8V
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
bias-pull-down;
};
};
audio_mclk: clk_div1 {
pinconf {
pins = "gpio15";
function = "func1";
power-source = <PM8994_GPIO_S4>; // 1.8V
};
};
volume_up_gpio: pm8996_gpio2 {
pinconf {
pins = "gpio2";
function = "normal";
input-enable;
drive-push-pull;
bias-pull-up;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
power-source = <PM8994_GPIO_S4>; // 1.8V
};
};
divclk4_pin_a: divclk4 {
pinconf {
pins = "gpio18";
function = PMIC_GPIO_FUNC_FUNC2;
bias-disable;
power-source = <PM8994_GPIO_S4>;
};
};
usb3_vbus_det_gpio: pm8996_gpio22 {
pinconf {
pins = "gpio22";
function = PMIC_GPIO_FUNC_NORMAL;
input-enable;
bias-pull-down;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
power-source = <PM8994_GPIO_S4>; // 1.8V
};
};
};
&pm8994_mpps {
gpio-line-names =
"VDDPX_BIAS",
"WIFI_LED",
"NC",
"BT_LED",
"PM_MPP05",
"PM_MPP06",
"PM_MPP07",
"NC";
};
&pm8994_spmi_regulators {
qcom,saw-reg = <&saw3>;
s9 {
qcom,saw-slave;
};
s10 {
qcom,saw-slave;
};
s11 {
qcom,saw-leader;
regulator-always-on;
regulator-min-microvolt = <980000>;
regulator-max-microvolt = <980000>;
};
};
&pmi8994_gpios {
gpio-line-names =
"NC",
"SPKR_AMP_EN1",
"SPKR_AMP_EN2",
"TP61",
"NC",
"USB2_VBUS_DET",
"NC",
"NC",
"NC",
"NC";
usb2_vbus_det_gpio: pmi8996_gpio6 {
pinconf {
pins = "gpio6";
function = PMIC_GPIO_FUNC_NORMAL;
input-enable;
bias-pull-down;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
power-source = <PM8994_GPIO_S4>; // 1.8V
};
};
};
&pmi8994_spmi_regulators {
vdd_gfx: s2@1700 {
reg = <0x1700 0x100>;
regulator-name = "VDD_GFX";
regulator-min-microvolt = <980000>;
regulator-max-microvolt = <980000>;
};
};
&rpm_requests {
pm8994-regulators {
compatible = "qcom,rpm-pm8994-regulators";
vdd_s1-supply = <&vph_pwr>;
vdd_s2-supply = <&vph_pwr>;
vdd_s3-supply = <&vph_pwr>;
vdd_s4-supply = <&vph_pwr>;
vdd_s5-supply = <&vph_pwr>;
vdd_s6-supply = <&vph_pwr>;
vdd_s7-supply = <&vph_pwr>;
vdd_s8-supply = <&vph_pwr>;
vdd_s9-supply = <&vph_pwr>;
vdd_s10-supply = <&vph_pwr>;
vdd_s11-supply = <&vph_pwr>;
vdd_s12-supply = <&vph_pwr>;
vdd_l1-supply = <&vreg_s1b_1p025>;
vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
vdd_l3_l11-supply = <&vreg_s3a_1p3>;
vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
vdd_l5_l7-supply = <&vreg_s5a_2p15>;
vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
vdd_l8_l16_l30-supply = <&vph_pwr>;
vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>;
vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>;
vdd_l14_l15-supply = <&vreg_s5a_2p15>;
vdd_l17_l29-supply = <&vph_pwr_bbyp>;
vdd_l20_l21-supply = <&vph_pwr_bbyp>;
vdd_l25-supply = <&vreg_s3a_1p3>;
vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
vreg_s3a_1p3: s3 {
regulator-name = "vreg_s3a_1p3";
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
};
/**
* 1.8v required on LS expansion
* for mezzanine boards
*/
vreg_s4a_1p8: s4 {
regulator-name = "vreg_s4a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vreg_s5a_2p15: s5 {
regulator-name = "vreg_s5a_2p15";
regulator-min-microvolt = <2150000>;
regulator-max-microvolt = <2150000>;
};
vreg_s7a_1p0: s7 {
regulator-name = "vreg_s7a_1p0";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
};
vreg_l1a_1p0: l1 {
regulator-name = "vreg_l1a_1p0";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
vreg_l2a_1p25: l2 {
regulator-name = "vreg_l2a_1p25";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
};
vreg_l3a_0p875: l3 {
regulator-name = "vreg_l3a_0p875";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
};
vreg_l4a_1p225: l4 {
regulator-name = "vreg_l4a_1p225";
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
vreg_l6a_1p2: l6 {
regulator-name = "vreg_l6a_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
vreg_l8a_1p8: l8 {
regulator-name = "vreg_l8a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l9a_1p8: l9 {
regulator-name = "vreg_l9a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l10a_1p8: l10 {
regulator-name = "vreg_l10a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l11a_1p15: l11 {
regulator-name = "vreg_l11a_1p15";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
};
vreg_l12a_1p8: l12 {
regulator-name = "vreg_l12a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l13a_2p95: l13 {
regulator-name = "vreg_l13a_2p95";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
vreg_l14a_1p8: l14 {
regulator-name = "vreg_l14a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l15a_1p8: l15 {
regulator-name = "vreg_l15a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l16a_2p7: l16 {
regulator-name = "vreg_l16a_2p7";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
};
vreg_l17a_2p8: l17 {
regulator-name = "vreg_l17a_2p8";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
};
vreg_l18a_2p85: l18 {
regulator-name = "vreg_l18a_2p85";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2900000>;
};
vreg_l19a_2p8: l19 {
regulator-name = "vreg_l19a_2p8";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
vreg_l20a_2p95: l20 {
regulator-name = "vreg_l20a_2p95";
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-allow-set-load;
};
vreg_l21a_2p95: l21 {
regulator-name = "vreg_l21a_2p95";
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-allow-set-load;
regulator-system-load = <200000>;
};
vreg_l22a_3p0: l22 {
regulator-name = "vreg_l22a_3p0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vreg_l23a_2p8: l23 {
regulator-name = "vreg_l23a_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
vreg_l24a_3p075: l24 {
regulator-name = "vreg_l24a_3p075";
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
};
vreg_l25a_1p2: l25 {
regulator-name = "vreg_l25a_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-allow-set-load;
};
vreg_l26a_0p8: l27 {
regulator-name = "vreg_l26a_0p8";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
vreg_l28a_0p925: l28 {
regulator-name = "vreg_l28a_0p925";
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <925000>;
regulator-allow-set-load;
};
vreg_l29a_2p8: l29 {
regulator-name = "vreg_l29a_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
vreg_l30a_1p8: l30 {
regulator-name = "vreg_l30a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l32a_1p8: l32 {
regulator-name = "vreg_l32a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_lvs1a_1p8: lvs1 {
regulator-name = "vreg_lvs1a_1p8";
};
vreg_lvs2a_1p8: lvs2 {
regulator-name = "vreg_lvs2a_1p8";
};
};
pmi8994-regulators {
compatible = "qcom,rpm-pmi8994-regulators";
vdd_s1-supply = <&vph_pwr>;
vdd_s2-supply = <&vph_pwr>;
vdd_s3-supply = <&vph_pwr>;
vdd_bst_byp-supply = <&vph_pwr>;
vph_pwr_bbyp: boost-bypass {
regulator-name = "vph_pwr_bbyp";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vreg_s1b_1p025: s1 {
regulator-name = "vreg_s1b_1p025";
regulator-min-microvolt = <1025000>;
regulator-max-microvolt = <1025000>;
};
};
};
&sdhc2 {
/* External SD card */
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>;
pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>;
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vreg_l21a_2p95>;
vqmmc-supply = <&vreg_l13a_2p95>;
status = "okay";
};
&q6asmdai {
dai@0 {
reg = <0>;
};
dai@1 {
reg = <1>;
};
dai@2 {
reg = <2>;
};
};
&sound {
compatible = "qcom,apq8096-sndcard";
model = "DB820c";
audio-routing = "RX_BIAS", "MCLK",
"MM_DL1", "MultiMedia1 Playback",
"MM_DL2", "MultiMedia2 Playback",
"MultiMedia3 Capture", "MM_UL3";
mm1-dai-link {
link-name = "MultiMedia1";
cpu {
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
};
};
mm2-dai-link {
link-name = "MultiMedia2";
cpu {
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
};
};
mm3-dai-link {
link-name = "MultiMedia3";
cpu {
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
};
};
hdmi-dai-link {
link-name = "HDMI";
cpu {
sound-dai = <&q6afedai HDMI_RX>;
};
platform {
sound-dai = <&q6routing>;
};
codec {
sound-dai = <&hdmi 0>;
};
};
slim-dai-link {
link-name = "SLIM Playback";
cpu {
sound-dai = <&q6afedai SLIMBUS_6_RX>;
};
platform {
sound-dai = <&q6routing>;
};
codec {
sound-dai = <&wcd9335 6>;
};
};
slimcap-dai-link {
link-name = "SLIM Capture";
cpu {
sound-dai = <&q6afedai SLIMBUS_0_TX>;
};
platform {
sound-dai = <&q6routing>;
};
codec {
sound-dai = <&wcd9335 1>;
};
};
};
&ufsphy {
status = "okay";
vdda-phy-supply = <&vreg_l28a_0p925>;
vdda-pll-supply = <&vreg_l12a_1p8>;
vddp-ref-clk-supply = <&vreg_l25a_1p2>;
};
&ufshc {
status = "okay";
vcc-supply = <&vreg_l20a_2p95>;
vccq-supply = <&vreg_l25a_1p2>;
vccq2-supply = <&vreg_s4a_1p8>;
vcc-max-microamp = <600000>;
vccq-max-microamp = <450000>;
vccq2-max-microamp = <450000>;
};
&usb2 {
status = "okay";
extcon = <&usb2_id>;
dwc3@7600000 {
extcon = <&usb2_id>;
dr_mode = "otg";
maximum-speed = "high-speed";
};
};
&usb3 {
status = "okay";
extcon = <&usb3_id>;
dwc3@6a00000 {
extcon = <&usb3_id>;
dr_mode = "otg";
};
};
&usb3phy {
status = "okay";
vdda-phy-supply = <&vreg_l28a_0p925>;
vdda-pll-supply = <&vreg_l12a_1p8>;
};
&venus {
status = "okay";
};
&wcd9335 {
clock-names = "mclk", "slimbus";
clocks = <&div1_mclk>,
<&rpmcc RPM_SMD_BB_CLK1>;
vdd-buck-supply = <&vreg_s4a_1p8>;
vdd-buck-sido-supply = <&vreg_s4a_1p8>;
vdd-tx-supply = <&vreg_s4a_1p8>;
vdd-rx-supply = <&vreg_s4a_1p8>;
vdd-io-supply = <&vreg_s4a_1p8>;
};
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi deleted 100644 → 0
View file @ c86c43c4
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2014-2016, The Linux Foundation. All rights reserved.
*/
#include "msm8996.dtsi"
#include "pm8994.dtsi"
#include "pmi8994.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/sound/qcom,q6asm.h>
/*
* GPIO name legend: proper name = the GPIO line is used as GPIO
* NC = not connected (pin out but not routed from the chip to
* anything the board)
* "[PER]" = pin is muxed for [peripheral] (not GPIO)
* LSEC = Low Speed External Connector
* P HSEC = Primary High Speed External Connector
* S HSEC = Secondary High Speed External Connector
* J14 = Camera Connector
* TP = Test Points
*
* Line names are taken from the schematic "DragonBoard 820c",
* drawing no: LM25-P2751-1
*
* For the lines routed to the external connectors the
* lines are named after the 96Boards CE Specification 1.0,
* Appendix "Expansion Connector Signal Description".
*
* When the 96Board naming of a line and the schematic name of
* the same line are in conflict, the 96Board specification
* takes precedence, which means that the external UART on the
* LSEC is named UART0 while the schematic and SoC names this
* UART3. This is only for the informational lines i.e. "[FOO]",
* the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
* ones actually used for GPIO.
*/
/ {
aliases {
serial0 = &blsp2_uart2;
serial1 = &blsp2_uart3;
serial2 = &blsp1_uart2;
i2c0 = &blsp1_i2c3;
i2c1 = &blsp2_i2c1;
i2c2 = &blsp2_i2c1;
spi0 = &blsp1_spi1;
spi1 = &blsp2_spi6;
};
chosen {
stdout-path = "serial0:115200n8";
};
clocks {
compatible = "simple-bus";
divclk4: divclk4 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "divclk4";
pinctrl-names = "default";
pinctrl-0 = <&divclk4_pin_a>;
};
div1_mclk: divclk1 {
compatible = "gpio-gate-clock";
pinctrl-0 = <&audio_mclk>;
pinctrl-names = "default";
clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
#clock-cells = <0>;
enable-gpios = <&pm8994_gpios 15 0>;
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat;
pinctrl-names = "default";
pinctrl-0 = <&volume_up_gpio>;
button@0 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
};
};
usb2_id: usb2-id {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb2_vbus_det_gpio>;
};
usb3_id: usb3-id {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb3_vbus_det_gpio>;
};
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
};
wlan_en: wlan-en-1-8v {
pinctrl-names = "default";
pinctrl-0 = <&wlan_en_gpios>;
compatible = "regulator-fixed";
regulator-name = "wlan-en-regulator";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&pm8994_gpios 8 0>;
/* WLAN card specific delay */
startup-delay-us = <70000>;
enable-active-high;
};
};
&blsp1_i2c3 {
/* On Low speed expansion */
label = "LS-I2C0";
status = "okay";
};
&blsp1_spi1 {
/* On Low speed expansion */
label = "LS-SPI0";
status = "okay";
};
&blsp1_uart2 {
label = "BT-UART";
status = "okay";
bluetooth {
compatible = "qcom,qca6174-bt";
/* bt_disable_n gpio */
enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
clocks = <&divclk4>;
};
};
&adsp_pil {
status = "okay";
};
&blsp2_i2c1 {
/* On High speed expansion */
label = "HS-I2C2";
status = "okay";
};
&blsp2_i2c1 {
/* On Low speed expansion */
label = "LS-I2C1";
status = "okay";
};
&blsp2_spi6 {
/* On High speed expansion */
label = "HS-SPI1";
status = "okay";
};
&blsp2_uart2 {
label = "LS-UART1";
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_uart2_2pins_default>;
pinctrl-1 = <&blsp2_uart2_2pins_sleep>;
};
&blsp2_uart3 {
label = "LS-UART0";
status = "disabled";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_uart3_4pins_default>;
pinctrl-1 = <&blsp2_uart3_4pins_sleep>;
};
&camss {
vdda-supply = <&vreg_l2a_1p25>;
};
&gpu {
status = "okay";
};
&hdmi {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
core-vdda-supply = <&vreg_l12a_1p8>;
core-vcc-supply = <&vreg_s4a_1p8>;
};
&hdmi_phy {
status = "okay";
vddio-supply = <&vreg_l12a_1p8>;
vcca-supply = <&vreg_l28a_0p925>;
#phy-cells = <0>;
};
&hsusb_phy1 {
status = "okay";
vdda-pll-supply = <&vreg_l12a_1p8>;
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
};
&hsusb_phy2 {
status = "okay";
vdda-pll-supply = <&vreg_l12a_1p8>;
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
};
&mdp {
status = "okay";
};
&mdss {
status = "okay";
};
&mmcc {
vdd-gfx-supply = <&vdd_gfx>;
};
&pm8994_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
};
&tlmm {
gpio-line-names =
"[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
"[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
"[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */
"[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */
"[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */
"[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */
"[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */
"[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */
"GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */
"TP93", /* GPIO_9 */
"GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */
"[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */
"NC", /* GPIO_12 */
"[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */
"[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */
"[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */
"TP99", /* GPIO_16 */
"[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */
"[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */
"[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */
"[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */
"FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */
"FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */
"GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */
"GPIO-D", /* GPIO_24, LSEC pin 26 */
"GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */
"GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */
"BLSP6_I2C_SDA", /* GPIO_27 */
"BLSP6_I2C_SCL", /* GPIO_28 */
"GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */
"GPIO30", /* GPIO_30, S HSEC pin 4 */
"HDMI_CEC", /* GPIO_31 */
"HDMI_DDC_CLOCK", /* GPIO_32 */
"HDMI_DDC_DATA", /* GPIO_33 */
"HDMI_HOT_PLUG_DETECT", /* GPIO_34 */
"PCIE0_RST_N", /* GPIO_35 */
"PCIE0_CLKREQ_N", /* GPIO_36 */
"PCIE0_WAKE", /* GPIO_37 */
"SD_CARD_DET_N", /* GPIO_38 */
"TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */
"W_DISABLE_N", /* GPIO_40 */
"[BLSP9_UART_TX]", /* GPIO_41 */
"[BLSP9_UART_RX]", /* GPIO_42 */
"[BLSP2_UART_CTS_N]", /* GPIO_43 */
"[BLSP2_UART_RFR_N]", /* GPIO_44 */
"[BLSP3_UART_TX]", /* GPIO_45 */
"[BLSP3_UART_RX]", /* GPIO_46 */
"[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */
"[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */
"[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */
"[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */
"[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */
"[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */
"[CODEC_INT1_N]", /* GPIO_53 */
"[CODEC_INT2_N]", /* GPIO_54 */
"[BLSP7_I2C_SDA]", /* GPIO_55 */
"[BLSP7_I2C_SCL]", /* GPIO_56 */
"MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */
"[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */
"[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */
"[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */
"[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */
"GPIO-E", /* GPIO_62, LSEC pin 27 */
"TP87", /* GPIO_63 */
"[CODEC_RST_N]", /* GPIO_64 */
"[PCM1_CLK]", /* GPIO_65 */
"[PCM1_SYNC]", /* GPIO_66 */
"[PCM1_DIN]", /* GPIO_67 */
"[PCM1_DOUT]", /* GPIO_68 */
"AUDIO_REF_CLK", /* GPIO_69 */
"SLIMBUS_CLK", /* GPIO_70 */
"SLIMBUS_DATA0", /* GPIO_71 */
"SLIMBUS_DATA1", /* GPIO_72 */
"NC", /* GPIO_73 */
"NC", /* GPIO_74 */
"NC", /* GPIO_75 */
"NC", /* GPIO_76 */
"TP94", /* GPIO_77 */
"NC", /* GPIO_78 */
"TP95", /* GPIO_79 */
"GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */
"TP88", /* GPIO_81 */
"TP89", /* GPIO_82 */
"TP90", /* GPIO_83 */
"TP91", /* GPIO_84 */
"[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */
"[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */
"[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */
"[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */
"TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */
"TSIF1_EN", /* GPIO_90, S HSEC pin 46 */
"TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */
"NC", /* GPIO_92 */
"TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */
"TSIF2_EN", /* GPIO_94, S HSEC pin 56 */
"TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */
"TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */
"NC", /* GPIO_97 */
"CAM1_STANDBY_N", /* GPIO_98 */
"NC", /* GPIO_99 */
"NC", /* GPIO_100 */
"[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */
"BOOT_CONFIG1", /* GPIO_102 */
"USB_HUB_RESET", /* GPIO_103 */
"CAM1_RST_N", /* GPIO_104 */
"NC", /* GPIO_105 */
"NC", /* GPIO_106 */
"NC", /* GPIO_107 */
"NC", /* GPIO_108 */
"NC", /* GPIO_109 */
"NC", /* GPIO_110 */
"NC", /* GPIO_111 */
"NC", /* GPIO_112 */
"PMI8994_BUA", /* GPIO_113 */
"PCIE2_RST_N", /* GPIO_114 */
"PCIE2_CLKREQ_N", /* GPIO_115 */
"PCIE2_WAKE", /* GPIO_116 */
"SSC_IRQ_0", /* GPIO_117 */
"SSC_IRQ_1", /* GPIO_118 */
"SSC_IRQ_2", /* GPIO_119 */
"NC", /* GPIO_120 */
"GPIO121", /* GPIO_121, S HSEC pin 2 */
"NC", /* GPIO_122 */
"SSC_IRQ_6", /* GPIO_123 */
"SSC_IRQ_7", /* GPIO_124 */
"GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */
"BOOT_CONFIG5", /* GPIO_126 */
"NC", /* GPIO_127 */
"NC", /* GPIO_128 */
"BOOT_CONFIG7", /* GPIO_129 */
"PCIE1_RST_N", /* GPIO_130 */
"PCIE1_CLKREQ_N", /* GPIO_131 */
"PCIE1_WAKE", /* GPIO_132 */
"GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */
"NC", /* GPIO_134 */
"NC", /* GPIO_135 */
"BOOT_CONFIG8", /* GPIO_136 */
"NC", /* GPIO_137 */
"NC", /* GPIO_138 */
"GPS_SSBI2", /* GPIO_139 */
"GPS_SSBI1", /* GPIO_140 */
"NC", /* GPIO_141 */
"NC", /* GPIO_142 */
"NC", /* GPIO_143 */
"BOOT_CONFIG6", /* GPIO_144 */
"NC", /* GPIO_145 */
"NC", /* GPIO_146 */
"NC", /* GPIO_147 */
"NC", /* GPIO_148 */
"NC"; /* GPIO_149 */
sdc2_cd_on: sdc2_cd_on {
mux {
pins = "gpio38";
function = "gpio";
};
config {
pins = "gpio38";
bias-pull-up; /* pull up */
drive-strength = <16>; /* 16 MA */
};
};
sdc2_cd_off: sdc2_cd_off {
mux {
pins = "gpio38";
function = "gpio";
};
config {
pins = "gpio38";
bias-pull-up; /* pull up */
drive-strength = <2>; /* 2 MA */
};
};
hdmi_hpd_active: hdmi_hpd_active {
mux {
pins = "gpio34";
function = "hdmi_hot";
};
config {
pins = "gpio34";
bias-pull-down;
drive-strength = <16>;
};
};
hdmi_hpd_suspend: hdmi_hpd_suspend {
mux {
pins = "gpio34";
function = "hdmi_hot";
};
config {
pins = "gpio34";
bias-pull-down;
drive-strength = <2>;
};
};
hdmi_ddc_active: hdmi_ddc_active {
mux {
pins = "gpio32", "gpio33";
function = "hdmi_ddc";
};
config {
pins = "gpio32", "gpio33";
drive-strength = <2>;
bias-pull-up;
};
};
hdmi_ddc_suspend: hdmi_ddc_suspend {
mux {
pins = "gpio32", "gpio33";
function = "hdmi_ddc";
};
config {
pins = "gpio32", "gpio33";
drive-strength = <2>;
bias-pull-down;
};
};
};
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
vddpe-3v3-supply = <&wlan_en>;
vdda-supply = <&vreg_l28a_0p925>;
};
&pcie1 {
status = "okay";
perst-gpio = <&tlmm 130 GPIO_ACTIVE_LOW>;
vdda-supply = <&vreg_l28a_0p925>;
};
&pcie2 {
status = "okay";
perst-gpio = <&tlmm 114 GPIO_ACTIVE_LOW>;
vdda-supply = <&vreg_l28a_0p925>;
};
&pcie_phy {
status = "okay";
vdda-phy-supply = <&vreg_l28a_0p925>;
vdda-pll-supply = <&vreg_l12a_1p8>;
};
&pm8994_gpios {
gpio-line-names =
"NC",
"KEY_VOLP_N",
"NC",
"BL1_PWM",
"GPIO-F", /* BL0_PWM, LSEC pin 28 */
"BL1_EN",
"NC",
"WLAN_EN",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"DIVCLK1",
"DIVCLK2",
"DIVCLK3",
"DIVCLK4",
"BT_EN",
"PMIC_SLB",
"PMIC_BUA",
"USB_VBUS_DET";
pinctrl-names = "default";
pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>;
ls_exp_gpio_f: pm8994_gpio5 {
pinconf {
pins = "gpio5";
output-low;
power-source = <2>; // PM8994_GPIO_S4, 1.8V
};
};
bt_en_gpios: bt_en_gpios {
pinconf {
pins = "gpio19";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
power-source = <PM8994_GPIO_S4>; // 1.8V
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
bias-pull-down;
};
};
wlan_en_gpios: wlan_en_gpios {
pinconf {
pins = "gpio8";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
power-source = <PM8994_GPIO_S4>; // 1.8V
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
bias-pull-down;
};
};
audio_mclk: clk_div1 {
pinconf {
pins = "gpio15";
function = "func1";
power-source = <PM8994_GPIO_S4>; // 1.8V
};
};
volume_up_gpio: pm8996_gpio2 {
pinconf {
pins = "gpio2";
function = "normal";
input-enable;
drive-push-pull;
bias-pull-up;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
power-source = <PM8994_GPIO_S4>; // 1.8V
};
};
divclk4_pin_a: divclk4 {
pinconf {
pins = "gpio18";
function = PMIC_GPIO_FUNC_FUNC2;
bias-disable;
power-source = <PM8994_GPIO_S4>;
};
};
usb3_vbus_det_gpio: pm8996_gpio22 {
pinconf {
pins = "gpio22";
function = PMIC_GPIO_FUNC_NORMAL;
input-enable;
bias-pull-down;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
power-source = <PM8994_GPIO_S4>; // 1.8V
};
};
};
&pm8994_mpps {
gpio-line-names =
"VDDPX_BIAS",
"WIFI_LED",
"NC",
"BT_LED",
"PM_MPP05",
"PM_MPP06",
"PM_MPP07",
"NC";
};
&pm8994_spmi_regulators {
qcom,saw-reg = <&saw3>;
s9 {
qcom,saw-slave;
};
s10 {
qcom,saw-slave;
};
s11 {
qcom,saw-leader;
regulator-always-on;
regulator-min-microvolt = <980000>;
regulator-max-microvolt = <980000>;
};
};
&pmi8994_gpios {
gpio-line-names =
"NC",
"SPKR_AMP_EN1",
"SPKR_AMP_EN2",
"TP61",
"NC",
"USB2_VBUS_DET",
"NC",
"NC",
"NC",
"NC";
usb2_vbus_det_gpio: pmi8996_gpio6 {
pinconf {
pins = "gpio6";
function = PMIC_GPIO_FUNC_NORMAL;
input-enable;
bias-pull-down;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
power-source = <PM8994_GPIO_S4>; // 1.8V
};
};
};
&pmi8994_spmi_regulators {
vdd_gfx: s2@1700 {
reg = <0x1700 0x100>;
regulator-name = "VDD_GFX";
regulator-min-microvolt = <980000>;
regulator-max-microvolt = <980000>;
};
};
&rpm_requests {
pm8994-regulators {
compatible = "qcom,rpm-pm8994-regulators";
vdd_s1-supply = <&vph_pwr>;
vdd_s2-supply = <&vph_pwr>;
vdd_s3-supply = <&vph_pwr>;
vdd_s4-supply = <&vph_pwr>;
vdd_s5-supply = <&vph_pwr>;
vdd_s6-supply = <&vph_pwr>;
vdd_s7-supply = <&vph_pwr>;
vdd_s8-supply = <&vph_pwr>;
vdd_s9-supply = <&vph_pwr>;
vdd_s10-supply = <&vph_pwr>;
vdd_s11-supply = <&vph_pwr>;
vdd_s12-supply = <&vph_pwr>;
vdd_l1-supply = <&vreg_s1b_1p025>;
vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
vdd_l3_l11-supply = <&vreg_s3a_1p3>;
vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
vdd_l5_l7-supply = <&vreg_s5a_2p15>;
vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
vdd_l8_l16_l30-supply = <&vph_pwr>;
vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>;
vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>;
vdd_l14_l15-supply = <&vreg_s5a_2p15>;
vdd_l17_l29-supply = <&vph_pwr_bbyp>;
vdd_l20_l21-supply = <&vph_pwr_bbyp>;
vdd_l25-supply = <&vreg_s3a_1p3>;
vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
vreg_s3a_1p3: s3 {
regulator-name = "vreg_s3a_1p3";
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
};
/**
* 1.8v required on LS expansion
* for mezzanine boards
*/
vreg_s4a_1p8: s4 {
regulator-name = "vreg_s4a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vreg_s5a_2p15: s5 {
regulator-name = "vreg_s5a_2p15";
regulator-min-microvolt = <2150000>;
regulator-max-microvolt = <2150000>;
};
vreg_s7a_1p0: s7 {
regulator-name = "vreg_s7a_1p0";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
};
vreg_l1a_1p0: l1 {
regulator-name = "vreg_l1a_1p0";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
vreg_l2a_1p25: l2 {
regulator-name = "vreg_l2a_1p25";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
};
vreg_l3a_0p875: l3 {
regulator-name = "vreg_l3a_0p875";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
};
vreg_l4a_1p225: l4 {
regulator-name = "vreg_l4a_1p225";
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
vreg_l6a_1p2: l6 {
regulator-name = "vreg_l6a_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
vreg_l8a_1p8: l8 {
regulator-name = "vreg_l8a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l9a_1p8: l9 {
regulator-name = "vreg_l9a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l10a_1p8: l10 {
regulator-name = "vreg_l10a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l11a_1p15: l11 {
regulator-name = "vreg_l11a_1p15";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
};
vreg_l12a_1p8: l12 {
regulator-name = "vreg_l12a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l13a_2p95: l13 {
regulator-name = "vreg_l13a_2p95";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
vreg_l14a_1p8: l14 {
regulator-name = "vreg_l14a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l15a_1p8: l15 {
regulator-name = "vreg_l15a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l16a_2p7: l16 {
regulator-name = "vreg_l16a_2p7";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
};
vreg_l17a_2p8: l17 {
regulator-name = "vreg_l17a_2p8";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
};
vreg_l18a_2p85: l18 {
regulator-name = "vreg_l18a_2p85";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2900000>;
};
vreg_l19a_2p8: l19 {
regulator-name = "vreg_l19a_2p8";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
vreg_l20a_2p95: l20 {
regulator-name = "vreg_l20a_2p95";
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-allow-set-load;
};
vreg_l21a_2p95: l21 {
regulator-name = "vreg_l21a_2p95";
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-allow-set-load;
regulator-system-load = <200000>;
};
vreg_l22a_3p0: l22 {
regulator-name = "vreg_l22a_3p0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vreg_l23a_2p8: l23 {
regulator-name = "vreg_l23a_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
vreg_l24a_3p075: l24 {
regulator-name = "vreg_l24a_3p075";
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
};
vreg_l25a_1p2: l25 {
regulator-name = "vreg_l25a_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-allow-set-load;
};
vreg_l26a_0p8: l27 {
regulator-name = "vreg_l26a_0p8";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
vreg_l28a_0p925: l28 {
regulator-name = "vreg_l28a_0p925";
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <925000>;
regulator-allow-set-load;
};
vreg_l29a_2p8: l29 {
regulator-name = "vreg_l29a_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
vreg_l30a_1p8: l30 {
regulator-name = "vreg_l30a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l32a_1p8: l32 {
regulator-name = "vreg_l32a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_lvs1a_1p8: lvs1 {
regulator-name = "vreg_lvs1a_1p8";
};
vreg_lvs2a_1p8: lvs2 {
regulator-name = "vreg_lvs2a_1p8";
};
};
pmi8994-regulators {
compatible = "qcom,rpm-pmi8994-regulators";
vdd_s1-supply = <&vph_pwr>;
vdd_s2-supply = <&vph_pwr>;
vdd_s3-supply = <&vph_pwr>;
vdd_bst_byp-supply = <&vph_pwr>;
vph_pwr_bbyp: boost-bypass {
regulator-name = "vph_pwr_bbyp";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vreg_s1b_1p025: s1 {
regulator-name = "vreg_s1b_1p025";
regulator-min-microvolt = <1025000>;
regulator-max-microvolt = <1025000>;
};
};
};
&sdhc2 {
/* External SD card */
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>;
pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>;
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vreg_l21a_2p95>;
vqmmc-supply = <&vreg_l13a_2p95>;
status = "okay";
};
&q6asmdai {
dai@0 {
reg = <0>;
};
dai@1 {
reg = <1>;
};
dai@2 {
reg = <2>;
};
};
&sound {
compatible = "qcom,apq8096-sndcard";
model = "DB820c";
audio-routing = "RX_BIAS", "MCLK",
"MM_DL1", "MultiMedia1 Playback",
"MM_DL2", "MultiMedia2 Playback",
"MultiMedia3 Capture", "MM_UL3";
mm1-dai-link {
link-name = "MultiMedia1";
cpu {
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
};
};
mm2-dai-link {
link-name = "MultiMedia2";
cpu {
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
};
};
mm3-dai-link {
link-name = "MultiMedia3";
cpu {
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
};
};
hdmi-dai-link {
link-name = "HDMI";
cpu {
sound-dai = <&q6afedai HDMI_RX>;
};
platform {
sound-dai = <&q6routing>;
};
codec {
sound-dai = <&hdmi 0>;
};
};
slim-dai-link {
link-name = "SLIM Playback";
cpu {
sound-dai = <&q6afedai SLIMBUS_6_RX>;
};
platform {
sound-dai = <&q6routing>;
};
codec {
sound-dai = <&wcd9335 6>;
};
};
slimcap-dai-link {
link-name = "SLIM Capture";
cpu {
sound-dai = <&q6afedai SLIMBUS_0_TX>;
};
platform {
sound-dai = <&q6routing>;
};
codec {
sound-dai = <&wcd9335 1>;
};
};
};
&ufsphy {
status = "okay";
vdda-phy-supply = <&vreg_l28a_0p925>;
vdda-pll-supply = <&vreg_l12a_1p8>;
vddp-ref-clk-supply = <&vreg_l25a_1p2>;
};
&ufshc {
status = "okay";
vcc-supply = <&vreg_l20a_2p95>;
vccq-supply = <&vreg_l25a_1p2>;
vccq2-supply = <&vreg_s4a_1p8>;
vcc-max-microamp = <600000>;
vccq-max-microamp = <450000>;
vccq2-max-microamp = <450000>;
};
&usb2 {
status = "okay";
extcon = <&usb2_id>;
dwc3@7600000 {
extcon = <&usb2_id>;
dr_mode = "otg";
maximum-speed = "high-speed";
};
};
&usb3 {
status = "okay";
extcon = <&usb3_id>;
dwc3@6a00000 {
extcon = <&usb3_id>;
dr_mode = "otg";
};
};
&usb3phy {
status = "okay";
vdda-phy-supply = <&vreg_l28a_0p925>;
vdda-pll-supply = <&vreg_l12a_1p8>;
};
&venus {
status = "okay";
};
&wcd9335 {
clock-names = "mclk", "slimbus";
clocks = <&div1_mclk>,
<&rpmcc RPM_SMD_BB_CLK1>;
vdd-buck-supply = <&vreg_s4a_1p8>;
vdd-buck-sido-supply = <&vreg_s4a_1p8>;
vdd-tx-supply = <&vreg_s4a_1p8>;
vdd-rx-supply = <&vreg_s4a_1p8>;
vdd-io-supply = <&vreg_s4a_1p8>;
};
arch/arm64/boot/dts/qcom/msm8916-mtp.dts
View file @ 442ee1fc
......@@ -5,9 +5,22 @@
/dts-v1/;
#include "msm8916-mtp.dtsi"
#include "msm8916-pm8916.dtsi"
/ {
model = "Qualcomm Technologies, Inc. MSM 8916 MTP";
compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp/1", "qcom,msm8916";
aliases {
serial0 = &blsp1_uart2;
usid0 = &pm8916_0;
};
chosen {
stdout-path = "serial0";
};
};
&blsp1_uart2 {
status = "okay";
};
arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi deleted 100644 → 0
View file @ c86c43c4
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
*/
#include "msm8916-pm8916.dtsi"
/ {
aliases {
serial0 = &blsp1_uart2;
usid0 = &pm8916_0;
};
chosen {
stdout-path = "serial0";
};
};
&blsp1_uart2 {
status = "okay";
};
arch/arm64/boot/dts/qcom/msm8996-mtp.dts
View file @ 442ee1fc
......@@ -5,9 +5,31 @@
/dts-v1/;
#include "msm8996-mtp.dtsi"
#include "msm8996.dtsi"
/ {
model = "Qualcomm Technologies, Inc. MSM 8996 MTP";
compatible = "qcom,msm8996-mtp";
aliases {
serial0 = &blsp2_uart2;
};
chosen {
stdout-path = "serial0";
};
soc {
serial@75b0000 {
status = "okay";
};
};
};
&hdmi {
status = "okay";
};
&hdmi_phy {
status = "okay";
};
arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi deleted 100644 → 0
View file @ c86c43c4
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
*/
#include "msm8996.dtsi"
/ {
aliases {
serial0 = &blsp2_uart2;
};
chosen {
stdout-path = "serial0";
};
soc {
serial@75b0000 {
status = "okay";
};
};
};
&hdmi {
status = "okay";
};
&hdmi_phy {
status = "okay";
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7