Commit 4434ade8 authored by Krzysztof Foltman's avatar Krzysztof Foltman Committed by Takashi Iwai

ALSA: usb-audio: add support for Akai MPD16

The decoding/encoding is based on own reverse-engineering. Both control and
data ports are handled. Writing to control port supports SysEx events only,
as this is the only type of messages that MPD16 recognizes.
Signed-off-by: default avatarKrzysztof Foltman <wdev@foltman.com>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent ead4046b
...@@ -644,6 +644,105 @@ static struct usb_protocol_ops snd_usbmidi_cme_ops = { ...@@ -644,6 +644,105 @@ static struct usb_protocol_ops snd_usbmidi_cme_ops = {
.output_packet = snd_usbmidi_output_standard_packet, .output_packet = snd_usbmidi_output_standard_packet,
}; };
/*
* AKAI MPD16 protocol:
*
* For control port (endpoint 1):
* ==============================
* One or more chunks consisting of first byte of (0x10 | msg_len) and then a
* SysEx message (msg_len=9 bytes long).
*
* For data port (endpoint 2):
* ===========================
* One or more chunks consisting of first byte of (0x20 | msg_len) and then a
* MIDI message (msg_len bytes long)
*
* Messages sent: Active Sense, Note On, Poly Pressure, Control Change.
*/
static void snd_usbmidi_akai_input(struct snd_usb_midi_in_endpoint *ep,
uint8_t *buffer, int buffer_length)
{
unsigned int pos = 0;
unsigned int len = (unsigned int)buffer_length;
while (pos < len) {
unsigned int port = (buffer[pos] >> 4) - 1;
unsigned int msg_len = buffer[pos] & 0x0f;
pos++;
if (pos + msg_len <= len && port < 2)
snd_usbmidi_input_data(ep, 0, &buffer[pos], msg_len);
pos += msg_len;
}
}
#define MAX_AKAI_SYSEX_LEN 9
static void snd_usbmidi_akai_output(struct snd_usb_midi_out_endpoint *ep,
struct urb *urb)
{
uint8_t *msg;
int pos, end, count, buf_end;
uint8_t tmp[MAX_AKAI_SYSEX_LEN];
struct snd_rawmidi_substream *substream = ep->ports[0].substream;
if (!ep->ports[0].active)
return;
msg = urb->transfer_buffer + urb->transfer_buffer_length;
buf_end = ep->max_transfer - MAX_AKAI_SYSEX_LEN - 1;
/* only try adding more data when there's space for at least 1 SysEx */
while (urb->transfer_buffer_length < buf_end) {
count = snd_rawmidi_transmit_peek(substream,
tmp, MAX_AKAI_SYSEX_LEN);
if (!count) {
ep->ports[0].active = 0;
return;
}
/* try to skip non-SysEx data */
for (pos = 0; pos < count && tmp[pos] != 0xF0; pos++)
;
if (pos > 0) {
snd_rawmidi_transmit_ack(substream, pos);
continue;
}
/* look for the start or end marker */
for (end = 1; end < count && tmp[end] < 0xF0; end++)
;
/* next SysEx started before the end of current one */
if (end < count && tmp[end] == 0xF0) {
/* it's incomplete - drop it */
snd_rawmidi_transmit_ack(substream, end);
continue;
}
/* SysEx complete */
if (end < count && tmp[end] == 0xF7) {
/* queue it, ack it, and get the next one */
count = end + 1;
msg[0] = 0x10 | count;
memcpy(&msg[1], tmp, count);
snd_rawmidi_transmit_ack(substream, count);
urb->transfer_buffer_length += count + 1;
msg += count + 1;
continue;
}
/* less than 9 bytes and no end byte - wait for more */
if (count < MAX_AKAI_SYSEX_LEN) {
ep->ports[0].active = 0;
return;
}
/* 9 bytes and no end marker in sight - malformed, skip it */
snd_rawmidi_transmit_ack(substream, count);
}
}
static struct usb_protocol_ops snd_usbmidi_akai_ops = {
.input = snd_usbmidi_akai_input,
.output = snd_usbmidi_akai_output,
};
/* /*
* Novation USB MIDI protocol: number of data bytes is in the first byte * Novation USB MIDI protocol: number of data bytes is in the first byte
* (when receiving) (+1!) or in the second byte (when sending); data begins * (when receiving) (+1!) or in the second byte (when sending); data begins
...@@ -1434,6 +1533,11 @@ static struct port_info { ...@@ -1434,6 +1533,11 @@ static struct port_info {
EXTERNAL_PORT(0x086a, 0x0001, 8, "%s Broadcast"), EXTERNAL_PORT(0x086a, 0x0001, 8, "%s Broadcast"),
EXTERNAL_PORT(0x086a, 0x0002, 8, "%s Broadcast"), EXTERNAL_PORT(0x086a, 0x0002, 8, "%s Broadcast"),
EXTERNAL_PORT(0x086a, 0x0003, 4, "%s Broadcast"), EXTERNAL_PORT(0x086a, 0x0003, 4, "%s Broadcast"),
/* Akai MPD16 */
CONTROL_PORT(0x09e8, 0x0062, 0, "%s Control"),
PORT_INFO(0x09e8, 0x0062, 1, "%s MIDI", 0,
SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC |
SNDRV_SEQ_PORT_TYPE_HARDWARE),
/* Access Music Virus TI */ /* Access Music Virus TI */
EXTERNAL_PORT(0x133e, 0x0815, 0, "%s MIDI"), EXTERNAL_PORT(0x133e, 0x0815, 0, "%s MIDI"),
PORT_INFO(0x133e, 0x0815, 1, "%s Synth", 0, PORT_INFO(0x133e, 0x0815, 1, "%s Synth", 0,
...@@ -2035,6 +2139,12 @@ int snd_usbmidi_create(struct snd_card *card, ...@@ -2035,6 +2139,12 @@ int snd_usbmidi_create(struct snd_card *card,
umidi->usb_protocol_ops = &snd_usbmidi_cme_ops; umidi->usb_protocol_ops = &snd_usbmidi_cme_ops;
err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints); err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
break; break;
case QUIRK_MIDI_AKAI:
umidi->usb_protocol_ops = &snd_usbmidi_akai_ops;
err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
/* endpoint 1 is input-only */
endpoints[1].out_cables = 0;
break;
default: default:
snd_printd(KERN_ERR "invalid quirk type %d\n", quirk->type); snd_printd(KERN_ERR "invalid quirk type %d\n", quirk->type);
err = -ENXIO; err = -ENXIO;
......
...@@ -37,6 +37,8 @@ struct snd_usb_midi_endpoint_info { ...@@ -37,6 +37,8 @@ struct snd_usb_midi_endpoint_info {
/* for QUIRK_MIDI_CME, data is NULL */ /* for QUIRK_MIDI_CME, data is NULL */
/* for QUIRK_MIDI_AKAI, data is NULL */
int snd_usbmidi_create(struct snd_card *card, int snd_usbmidi_create(struct snd_card *card,
struct usb_interface *iface, struct usb_interface *iface,
struct list_head *midi_list, struct list_head *midi_list,
......
...@@ -1973,6 +1973,17 @@ YAMAHA_DEVICE(0x7010, "UB99"), ...@@ -1973,6 +1973,17 @@ YAMAHA_DEVICE(0x7010, "UB99"),
} }
}, },
/* AKAI devices */
{
USB_DEVICE(0x09e8, 0x0062),
.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
.vendor_name = "AKAI",
.product_name = "MPD16",
.ifnum = 0,
.type = QUIRK_MIDI_AKAI,
}
},
/* TerraTec devices */ /* TerraTec devices */
{ {
USB_DEVICE_VENDOR_SPEC(0x0ccd, 0x0012), USB_DEVICE_VENDOR_SPEC(0x0ccd, 0x0012),
......
...@@ -289,6 +289,7 @@ int snd_usb_create_quirk(struct snd_usb_audio *chip, ...@@ -289,6 +289,7 @@ int snd_usb_create_quirk(struct snd_usb_audio *chip,
[QUIRK_MIDI_FASTLANE] = create_any_midi_quirk, [QUIRK_MIDI_FASTLANE] = create_any_midi_quirk,
[QUIRK_MIDI_EMAGIC] = create_any_midi_quirk, [QUIRK_MIDI_EMAGIC] = create_any_midi_quirk,
[QUIRK_MIDI_CME] = create_any_midi_quirk, [QUIRK_MIDI_CME] = create_any_midi_quirk,
[QUIRK_MIDI_AKAI] = create_any_midi_quirk,
[QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk, [QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk,
[QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk, [QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk,
[QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk, [QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk,
......
...@@ -74,6 +74,7 @@ enum quirk_type { ...@@ -74,6 +74,7 @@ enum quirk_type {
QUIRK_MIDI_FASTLANE, QUIRK_MIDI_FASTLANE,
QUIRK_MIDI_EMAGIC, QUIRK_MIDI_EMAGIC,
QUIRK_MIDI_CME, QUIRK_MIDI_CME,
QUIRK_MIDI_AKAI,
QUIRK_MIDI_US122L, QUIRK_MIDI_US122L,
QUIRK_AUDIO_STANDARD_INTERFACE, QUIRK_AUDIO_STANDARD_INTERFACE,
QUIRK_AUDIO_FIXED_ENDPOINT, QUIRK_AUDIO_FIXED_ENDPOINT,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment