Merge branch 'for-upstream' of...

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2017-04-14

Here's the main batch of Bluetooth & 802.15.4 patches for the 4.12
kernel.

 - Many fixes to 6LoWPAN, in particular for BLE
 - New CA8210 IEEE 802.15.4 device driver (accounting for most of the
   lines of code added in this pull request)
 - Added Nokia Bluetooth (UART) HCI driver
 - Some serdev & TTY changes that are dependencies for the Nokia
   driver (with acks from relevant maintainers and an agreement that
   these come through the bluetooth tree)
 - Support for new Intel Bluetooth device
 - Various other minor cleanups/fixes here and there

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/ieee802154/ca8210.txt

+* CA8210 IEEE 802.15.4 *
+
+Required properties:
+	- compatible:           Should be "cascoda,ca8210"
+	- reg:                  Controlling chip select
+	- spi-max-frequency:    Maximum clock speed, should be *less than*
+	                        4000000
+	- spi-cpol:             Requires inverted clock polarity
+	- reset-gpio:           GPIO attached to reset
+	- irq-gpio:             GPIO attached to IRQ
+Optional properties:
+	- extclock-enable:      Include for the ca8210 to route its 16MHz clock
+	                        to an output
+	- extclock-freq:        Frequency in Hz of the external clock
+	- extclock-gpio:        GPIO of the ca8210 to output the clock on
+
+Example:
+	ca8210@0 {
+		compatible = "cascoda,ca8210";
+		reg = <0>;
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		reset-gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		irq-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		extclock-enable;
+		extclock-freq = 16000000;
+		extclock-gpio = 2;
+	};

Documentation/devicetree/bindings/net/nokia-bluetooth.txt

+Nokia Bluetooth Chips
+---------------------
+
+Nokia phones often come with UART connected bluetooth chips from different
+vendors and modified device API. Those devices speak a protocol named H4+
+(also known as h4p) by Nokia, which is similar to the H4 protocol from the
+Bluetooth standard. In addition to the H4 protocol it specifies two more
+UART status lines for wakeup of UART transceivers to improve power management
+and a few new packet types used to negotiate uart speed.
+
+Required properties:
+
+ - compatible: should contain "nokia,h4p-bluetooth" as well as one of the following:
+   * "brcm,bcm2048-nokia"
+   * "ti,wl1271-bluetooth-nokia"
+ - reset-gpios: GPIO specifier, used to reset the BT module (active low)
+ - bluetooth-wakeup-gpios: GPIO specifier, used to wakeup the BT module (active high)
+ - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor (active high)
+ - clock-names: should be "sysclk"
+ - clocks: should contain a clock specifier for every name in clock-names
+
+Optional properties:
+
+ - None
+
+Example:
+
+/ {
+       /* controlled (enabled/disabled) directly by BT module */
+       bluetooth_clk: vctcxo {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <38400000>;
+       };
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart2_pins>;
+
+       bluetooth {
+               compatible = "ti,wl1271-bluetooth-nokia", "nokia,h4p-bluetooth";
+
+               reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; /* gpio26 */
+               host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */
+               bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* gpio37 */
+
+               clocks = <&bluetooth_clk>;
+               clock-names = "sysclk";
+       };
+};

Documentation/devicetree/bindings/net/ti,wilink-st.txt

+TI WiLink 7/8 (wl12xx/wl18xx) Shared Transport BT/FM/GPS devices
+
+TI WiLink devices have a UART interface for providing Bluetooth, FM radio,
+and GPS over what's called "shared transport". The shared transport is
+standard BT HCI protocol with additional channels for the other functions.
+
+These devices also have a separate WiFi interface as described in
+wireless/ti,wlcore.txt.
+
+This bindings follows the UART slave device binding in
+../serial/slave-device.txt.
+
+Required properties:
+ - compatible: should be one of the following:
+    "ti,wl1271-st"
+    "ti,wl1273-st"
+    "ti,wl1831-st"
+    "ti,wl1835-st"
+    "ti,wl1837-st"
+
+Optional properties:
+ - enable-gpios : GPIO signal controlling enabling of BT. Active high.
+ - vio-supply : Vio input supply (1.8V)
+ - vbat-supply : Vbat input supply (2.9-4.8V)
+
+Example:
+
+&serial0 {
+	compatible = "ns16550a";
+	...
+	bluetooth {
+		compatible = "ti,wl1835-st";
+		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+	};
+};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -51,6 +51,7 @@ brcm	Broadcom Corporation
 buffalo	Buffalo, Inc.
 calxeda	Calxeda
 capella	Capella Microsystems, Inc
+cascoda	Cascoda, Ltd.
 cavium	Cavium, Inc.
 cdns	Cadence Design Systems Inc.
 ceva	Ceva, Inc.

MAINTAINERS

@@ -2944,6 +2944,15 @@ W:	http://www.linux-c6x.org/wiki/index.php/Main_Page
 S:	Maintained
 F:	arch/c6x/
 
+CA8210 IEEE-802.15.4 RADIO DRIVER
+M:	Harry Morris <h.morris@cascoda.com>
+M:	linuxdev@cascoda.com
+L:	linux-wpan@vger.kernel.org
+W:	https://github.com/Cascoda/ca8210-linux.git
+S:	Maintained
+F:	drivers/net/ieee802154/ca8210.c
+F:	Documentation/devicetree/bindings/net/ieee802154/ca8210.txt
+
 CACHEFILES: FS-CACHE BACKEND FOR CACHING ON MOUNTED FILESYSTEMS
 M:	David Howells <dhowells@redhat.com>
 L:	linux-cachefs@redhat.com (moderated for non-subscribers)

arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts

@@ -98,6 +98,11 @@ uart1: uart@f7111000 {
 			assigned-clocks = <&sys_ctrl HI6220_UART1_SRC>;
 			assigned-clock-rates = <150000000>;
 			status = "ok";
+
+			bluetooth {
+				compatible = "ti,wl1835-st";
+				enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			};
 		};
 
 		uart2: uart@f7112000 {

drivers/bluetooth/Kconfig

@@ -86,6 +86,18 @@ config BT_HCIUART_H4
 
 	  Say Y here to compile support for HCI UART (H4) protocol.
 
+config BT_HCIUART_NOKIA
+	tristate "UART Nokia H4+ protocol support"
+	depends on BT_HCIUART
+	depends on SERIAL_DEV_BUS
+	depends on PM
+	help
+	  Nokia H4+ is serial protocol for communication between Bluetooth
+	  device and host. This protocol is required for Bluetooth devices
+	  with UART interface in Nokia devices.
+
+	  Say Y here to compile support for Nokia's H4+ protocol.
+
 config BT_HCIUART_BCSP
 	bool "BCSP protocol support"
 	depends on BT_HCIUART

drivers/bluetooth/Makefile

@@ -25,10 +25,13 @@ obj-$(CONFIG_BT_BCM)		+= btbcm.o
 obj-$(CONFIG_BT_RTL)		+= btrtl.o
 obj-$(CONFIG_BT_QCA)		+= btqca.o
 
+obj-$(CONFIG_BT_HCIUART_NOKIA)	+= hci_nokia.o
+
 btmrvl-y			:= btmrvl_main.o
 btmrvl-$(CONFIG_DEBUG_FS)	+= btmrvl_debugfs.o
 
 hci_uart-y				:= hci_ldisc.o
+hci_uart-$(CONFIG_SERIAL_DEV_BUS)	+= hci_serdev.o
 hci_uart-$(CONFIG_BT_HCIUART_H4)	+= hci_h4.o
 hci_uart-$(CONFIG_BT_HCIUART_BCSP)	+= hci_bcsp.o
 hci_uart-$(CONFIG_BT_HCIUART_LL)	+= hci_ll.o

drivers/bluetooth/bluecard_cs.c

@@ -695,9 +695,8 @@ static int bluecard_open(struct bluecard_info *info)
 
 	spin_lock_init(&(info->lock));
 
-	init_timer(&(info->timer));
-	info->timer.function = &bluecard_activity_led_timeout;
-	info->timer.data = (u_long)info;
+	setup_timer(&(info->timer), &bluecard_activity_led_timeout,
+		    (u_long)info);
 
 	skb_queue_head_init(&(info->txq));
 

drivers/bluetooth/btmrvl_sdio.c

@@ -20,6 +20,7 @@
 
 #include <linux/firmware.h>
 #include <linux/slab.h>
+#include <linux/suspend.h>
 
 #include <linux/mmc/sdio_ids.h>
 #include <linux/mmc/sdio_func.h>
@@ -60,13 +61,15 @@ static const struct of_device_id btmrvl_sdio_of_match_table[] = {
 
 static irqreturn_t btmrvl_wake_irq_bt(int irq, void *priv)
 {
-	struct btmrvl_plt_wake_cfg *cfg = priv;
+	struct btmrvl_sdio_card *card = priv;
+	struct btmrvl_plt_wake_cfg *cfg = card->plt_wake_cfg;
 
-	if (cfg->irq_bt >= 0) {
 	pr_info("%s: wake by bt", __func__);
 	cfg->wake_by_bt = true;
 	disable_irq_nosync(irq);
-	}
+
+	pm_wakeup_event(&card->func->dev, 0);
+	pm_system_wakeup();
 
 	return IRQ_HANDLED;
 }
@@ -101,7 +104,7 @@ static int btmrvl_sdio_probe_of(struct device *dev,
 		} else {
 			ret = devm_request_irq(dev, cfg->irq_bt,
 					       btmrvl_wake_irq_bt,
-					       0, "bt_wake", cfg);
+					       0, "bt_wake", card);
 			if (ret) {
 				dev_err(dev,
 					"Failed to request irq_bt %d (%d)\n",
@@ -1574,7 +1577,7 @@ static void btmrvl_sdio_remove(struct sdio_func *func)
 							MODULE_SHUTDOWN_REQ);
 				btmrvl_sdio_disable_host_int(card);
 			}
-			BT_DBG("unregester dev");
+			BT_DBG("unregister dev");
 			card->priv->surprise_removed = true;
 			btmrvl_sdio_unregister_dev(card);
 			btmrvl_remove_card(card->priv);
@@ -1625,6 +1628,13 @@ static int btmrvl_sdio_suspend(struct device *dev)
 	if (priv->adapter->hs_state != HS_ACTIVATED) {
 		if (btmrvl_enable_hs(priv)) {
 			BT_ERR("HS not activated, suspend failed!");
+			/* Disable platform specific wakeup interrupt */
+			if (card->plt_wake_cfg &&
+			    card->plt_wake_cfg->irq_bt >= 0) {
+				disable_irq_wake(card->plt_wake_cfg->irq_bt);
+				disable_irq(card->plt_wake_cfg->irq_bt);
+			}
+
 			priv->adapter->is_suspending = false;
 			return -EBUSY;
 		}
@@ -1637,10 +1647,10 @@ static int btmrvl_sdio_suspend(struct device *dev)
 	if (priv->adapter->hs_state == HS_ACTIVATED) {
 		BT_DBG("suspend with MMC_PM_KEEP_POWER");
 		return sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
-	} else {
+	}
+
 	BT_DBG("suspend without MMC_PM_KEEP_POWER");
 	return 0;
-	}
 }
 
 static int btmrvl_sdio_resume(struct device *dev)

drivers/bluetooth/btrtl.c

@@ -275,11 +275,8 @@ static int rtl_load_config(struct hci_dev *hdev, const char *name, u8 **buff)
 
 	BT_INFO("%s: rtl: loading %s", hdev->name, name);
 	ret = request_firmware(&fw, name, &hdev->dev);
-	if (ret < 0) {
-		BT_ERR("%s: Failed to load %s", hdev->name, name);
+	if (ret < 0)
 		return ret;
-	}
-
 	ret = fw->size;
 	*buff = kmemdup(fw->data, ret, GFP_KERNEL);
 
@@ -331,6 +328,7 @@ static int btrtl_setup_rtl8723b(struct hci_dev *hdev, u16 lmp_subver,
 	u8 *cfg_buff = NULL;
 	u8 *tbuff;
 	char *cfg_name = NULL;
+	bool config_needed = false;
 
 	switch (lmp_subver) {
 	case RTL_ROM_LMP_8723B:
@@ -344,6 +342,7 @@ static int btrtl_setup_rtl8723b(struct hci_dev *hdev, u16 lmp_subver,
 		break;
 	case RTL_ROM_LMP_8822B:
 		cfg_name = "rtl_bt/rtl8822b_config.bin";
+		config_needed = true;
 		break;
 	default:
 		BT_ERR("%s: rtl: no config according to lmp_subver %04x",
@@ -353,8 +352,12 @@ static int btrtl_setup_rtl8723b(struct hci_dev *hdev, u16 lmp_subver,
 
 	if (cfg_name) {
 		cfg_sz = rtl_load_config(hdev, cfg_name, &cfg_buff);
-		if (cfg_sz < 0)
+		if (cfg_sz < 0) {
 			cfg_sz = 0;
+			if (config_needed)
+				BT_ERR("Necessary config file %s not found\n",
+				       cfg_name);
+		}
 	} else
 		cfg_sz = 0;
 

drivers/bluetooth/btusb.c

@@ -26,6 +26,7 @@
 #include <linux/firmware.h>
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
+#include <linux/suspend.h>
 #include <asm/unaligned.h>
 
 #include <net/bluetooth/bluetooth.h>
@@ -262,6 +263,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x0cf3, 0xe009), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME },
+	{ USB_DEVICE(0x0cf3, 0xe301), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x0489, 0xe092), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x04ca, 0x3011), .driver_info = BTUSB_QCA_ROME },
@@ -328,6 +330,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x1286, 0x204e), .driver_info = BTUSB_MARVELL },
 
 	/* Intel Bluetooth devices */
+	{ USB_DEVICE(0x8087, 0x0025), .driver_info = BTUSB_INTEL_NEW },
 	{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
 	{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
 	{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL },
@@ -2024,13 +2027,18 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 		return -EINVAL;
 	}
 
-	/* At the moment the iBT 3.0 hardware variants 0x0b (LnP/SfP)
-	 * and 0x0c (WsP) are supported by this firmware loading method.
+	/* Check for supported iBT hardware variants of this firmware
+	 * loading method.
 	 *
 	 * This check has been put in place to ensure correct forward
 	 * compatibility options when newer hardware variants come along.
 	 */
-	if (ver.hw_variant != 0x0b && ver.hw_variant != 0x0c) {
+	switch (ver.hw_variant) {
+	case 0x0b:	/* SfP */
+	case 0x0c:	/* WsP */
+	case 0x12:	/* ThP */
+		break;
+	default:
 		BT_ERR("%s: Unsupported Intel hardware variant (%u)",
 		       hdev->name, ver.hw_variant);
 		return -EINVAL;
@@ -2792,6 +2800,7 @@ static irqreturn_t btusb_oob_wake_handler(int irq, void *priv)
 	struct btusb_data *data = priv;
 
 	pm_wakeup_event(&data->udev->dev, 0);
+	pm_system_wakeup();
 
 	/* Disable only if not already disabled (keep it balanced) */
 	if (test_and_clear_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags)) {

drivers/bluetooth/hci_bcm.c

@@ -146,13 +146,13 @@ static bool bcm_device_exists(struct bcm_device *device)
 static int bcm_gpio_set_power(struct bcm_device *dev, bool powered)
 {
 	if (powered && !IS_ERR(dev->clk) && !dev->clk_enabled)
-		clk_enable(dev->clk);
+		clk_prepare_enable(dev->clk);
 
 	gpiod_set_value(dev->shutdown, powered);
 	gpiod_set_value(dev->device_wakeup, powered);
 
 	if (!powered && !IS_ERR(dev->clk) && dev->clk_enabled)
-		clk_disable(dev->clk);
+		clk_disable_unprepare(dev->clk);
 
 	dev->clk_enabled = powered;
 
@@ -287,6 +287,9 @@ static int bcm_open(struct hci_uart *hu)
 
 	hu->priv = bcm;
 
+	if (!hu->tty->dev)
+		goto out;
+
 	mutex_lock(&bcm_device_lock);
 	list_for_each(p, &bcm_device_list) {
 		struct bcm_device *dev = list_entry(p, struct bcm_device, list);
@@ -307,7 +310,7 @@ static int bcm_open(struct hci_uart *hu)
 	}
 
 	mutex_unlock(&bcm_device_lock);
-
+out:
 	return 0;
 }
 
@@ -697,28 +700,14 @@ static int bcm_resource(struct acpi_resource *ares, void *data)
 	/* Always tell the ACPI core to skip this resource */
 	return 1;
 }
+#endif /* CONFIG_ACPI */
 
-static int bcm_acpi_probe(struct bcm_device *dev)
+static int bcm_platform_probe(struct bcm_device *dev)
 {
 	struct platform_device *pdev = dev->pdev;
-	LIST_HEAD(resources);
-	const struct dmi_system_id *dmi_id;
-	const struct acpi_gpio_mapping *gpio_mapping = acpi_bcm_int_last_gpios;
-	const struct acpi_device_id *id;
-	int ret;
 
 	dev->name = dev_name(&pdev->dev);
 
-	/* Retrieve GPIO data */
-	id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
-	if (id)
-		gpio_mapping = (const struct acpi_gpio_mapping *) id->driver_data;
-
-	ret = acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
-					gpio_mapping);
-	if (ret)
-		return ret;
-
 	dev->clk = devm_clk_get(&pdev->dev, NULL);
 
 	dev->device_wakeup = devm_gpiod_get_optional(&pdev->dev,
@@ -755,6 +744,33 @@ static int bcm_acpi_probe(struct bcm_device *dev)
 		return -EINVAL;
 	}
 
+	return 0;
+}
+
+#ifdef CONFIG_ACPI
+static int bcm_acpi_probe(struct bcm_device *dev)
+{
+	struct platform_device *pdev = dev->pdev;
+	LIST_HEAD(resources);
+	const struct dmi_system_id *dmi_id;
+	const struct acpi_gpio_mapping *gpio_mapping = acpi_bcm_int_last_gpios;
+	const struct acpi_device_id *id;
+	int ret;
+
+	/* Retrieve GPIO data */
+	id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
+	if (id)
+		gpio_mapping = (const struct acpi_gpio_mapping *) id->driver_data;
+
+	ret = acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
+					gpio_mapping);
+	if (ret)
+		return ret;
+
+	ret = bcm_platform_probe(dev);
+	if (ret)
+		return ret;
+
 	/* Retrieve UART ACPI info */
 	ret = acpi_dev_get_resources(ACPI_COMPANION(&dev->pdev->dev),
 				     &resources, bcm_resource, dev);
@@ -789,7 +805,10 @@ static int bcm_probe(struct platform_device *pdev)
 
 	dev->pdev = pdev;
 
+	if (has_acpi_companion(&pdev->dev))
 		ret = bcm_acpi_probe(dev);
+	else
+		ret = bcm_platform_probe(dev);
 	if (ret)
 		return ret;
 

drivers/bluetooth/hci_h4.c

@@ -171,9 +171,20 @@ struct sk_buff *h4_recv_buf(struct hci_dev *hdev, struct sk_buff *skb,
 			    const unsigned char *buffer, int count,
 			    const struct h4_recv_pkt *pkts, int pkts_count)
 {
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	u8 alignment = hu->alignment;
+
 	while (count) {
 		int i, len;
 
+		/* remove padding bytes from buffer */
+		for (; hu->padding && count > 0; hu->padding--) {
+			count--;
+			buffer++;
+		}
+		if (!count)
+			break;
+
 		if (!skb) {
 			for (i = 0; i < pkts_count; i++) {
 				if (buffer[0] != (&pkts[i])->type)
@@ -253,11 +264,17 @@ struct sk_buff *h4_recv_buf(struct hci_dev *hdev, struct sk_buff *skb,
 			}
 
 			if (!dlen) {
+				hu->padding = (skb->len - 1) % alignment;
+				hu->padding = (alignment - hu->padding) % alignment;
+
 				/* No more data, complete frame */
 				(&pkts[i])->recv(hdev, skb);
 				skb = NULL;
 			}
 		} else {
+			hu->padding = (skb->len - 1) % alignment;
+			hu->padding = (alignment - hu->padding) % alignment;
+
 			/* Complete frame */
 			(&pkts[i])->recv(hdev, skb);
 			skb = NULL;

drivers/bluetooth/hci_intel.c

@@ -307,6 +307,9 @@ static int intel_set_power(struct hci_uart *hu, bool powered)
 	struct list_head *p;
 	int err = -ENODEV;
 
+	if (!hu->tty->dev)
+		return err;
+
 	mutex_lock(&intel_device_list_lock);
 
 	list_for_each(p, &intel_device_list) {
@@ -379,6 +382,9 @@ static void intel_busy_work(struct work_struct *work)
 	struct intel_data *intel = container_of(work, struct intel_data,
 						busy_work);
 
+	if (!intel->hu->tty->dev)
+		return;
+
 	/* Link is busy, delay the suspend */
 	mutex_lock(&intel_device_list_lock);
 	list_for_each(p, &intel_device_list) {
@@ -601,12 +607,18 @@ static int intel_setup(struct hci_uart *hu)
 		return -EINVAL;
 	}
 
-	/* At the moment only the hardware variant iBT 3.0 (LnP/SfP) is
-	 * supported by this firmware loading method. This check has been
-	 * put in place to ensure correct forward compatibility options
-	 * when newer hardware variants come along.
+        /* Check for supported iBT hardware variants of this firmware
+         * loading method.
+         *
+         * This check has been put in place to ensure correct forward
+         * compatibility options when newer hardware variants come along.
          */
-	if (ver.hw_variant != 0x0b) {
+	switch (ver.hw_variant) {
+	case 0x0b:	/* LnP */
+	case 0x0c:	/* WsP */
+	case 0x12:	/* ThP */
+		break;
+	default:
 		bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
 			   ver.hw_variant);
 		return -EINVAL;
@@ -699,10 +711,13 @@ static int intel_setup(struct hci_uart *hu)
 	/* With this Intel bootloader only the hardware variant and device
 	 * revision information are used to select the right firmware.
 	 *
-	 * Currently this bootloader support is limited to hardware variant
-	 * iBT 3.0 (LnP/SfP) which is identified by the value 11 (0x0b).
+	 * The firmware filename is ibt-<hw_variant>-<dev_revid>.sfi.
+	 *
+	 * Currently the supported hardware variants are:
+	 *   11 (0x0b) for iBT 3.0 (LnP/SfP)
 	 */
-	snprintf(fwname, sizeof(fwname), "intel/ibt-11-%u.sfi",
+	snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u.sfi",
+		le16_to_cpu(ver.hw_variant),
 		le16_to_cpu(params->dev_revid));
 
 	err = request_firmware(&fw, fwname, &hdev->dev);
@@ -716,7 +731,8 @@ static int intel_setup(struct hci_uart *hu)
 	bt_dev_info(hdev, "Found device firmware: %s", fwname);
 
 	/* Save the DDC file name for later */
-	snprintf(fwname, sizeof(fwname), "intel/ibt-11-%u.ddc",
+	snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u.ddc",
+		le16_to_cpu(ver.hw_variant),
 		le16_to_cpu(params->dev_revid));
 
 	kfree_skb(skb);
@@ -889,6 +905,8 @@ static int intel_setup(struct hci_uart *hu)
 	list_for_each(p, &intel_device_list) {
 		struct intel_device *dev = list_entry(p, struct intel_device,
 						      list);
+		if (!hu->tty->dev)
+			break;
 		if (hu->tty->dev->parent == dev->pdev->dev.parent) {
 			if (device_may_wakeup(&dev->pdev->dev)) {
 				set_bit(STATE_LPM_ENABLED, &intel->flags);
@@ -1056,6 +1074,9 @@ static int intel_enqueue(struct hci_uart *hu, struct sk_buff *skb)
 
 	BT_DBG("hu %p skb %p", hu, skb);
 
+	if (!hu->tty->dev)
+		goto out_enqueue;
+
 	/* Be sure our controller is resumed and potential LPM transaction
 	 * completed before enqueuing any packet.
 	 */
@@ -1072,7 +1093,7 @@ static int intel_enqueue(struct hci_uart *hu, struct sk_buff *skb)
 		}
 	}
 	mutex_unlock(&intel_device_list_lock);
-
+out_enqueue:
 	skb_queue_tail(&intel->txq, skb);
 
 	return 0;

drivers/bluetooth/hci_ldisc.c

@@ -134,6 +134,7 @@ int hci_uart_tx_wakeup(struct hci_uart *hu)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(hci_uart_tx_wakeup);
 
 static void hci_uart_write_work(struct work_struct *work)
 {
@@ -318,25 +319,6 @@ void hci_uart_set_speeds(struct hci_uart *hu, unsigned int init_speed,
 	hu->oper_speed = oper_speed;
 }
 
-void hci_uart_init_tty(struct hci_uart *hu)
-{
-	struct tty_struct *tty = hu->tty;
-	struct ktermios ktermios;
-
-	/* Bring the UART into a known 8 bits no parity hw fc state */
-	ktermios = tty->termios;
-	ktermios.c_iflag &= ~(IGNBRK | BRKINT | PARMRK | ISTRIP |
-			      INLCR | IGNCR | ICRNL | IXON);
-	ktermios.c_oflag &= ~OPOST;
-	ktermios.c_lflag &= ~(ECHO | ECHONL | ICANON | ISIG | IEXTEN);
-	ktermios.c_cflag &= ~(CSIZE | PARENB);
-	ktermios.c_cflag |= CS8;
-	ktermios.c_cflag |= CRTSCTS;
-
-	/* tty_set_termios() return not checked as it is always 0 */
-	tty_set_termios(tty, &ktermios);
-}
-
 void hci_uart_set_baudrate(struct hci_uart *hu, unsigned int speed)
 {
 	struct tty_struct *tty = hu->tty;
@@ -459,6 +441,10 @@ static int hci_uart_tty_open(struct tty_struct *tty)
 	hu->tty = tty;
 	tty->receive_room = 65536;
 
+	/* disable alignment support by default */
+	hu->alignment = 1;
+	hu->padding = 0;
+
 	INIT_WORK(&hu->init_ready, hci_uart_init_work);
 	INIT_WORK(&hu->write_work, hci_uart_write_work);
 

drivers/bluetooth/hci_ll.c

@@ -34,20 +34,24 @@
 #include <linux/sched.h>
 #include <linux/types.h>
 #include <linux/fcntl.h>
+#include <linux/firmware.h>
 #include <linux/interrupt.h>
 #include <linux/ptrace.h>
 #include <linux/poll.h>
 
 #include <linux/slab.h>
-#include <linux/tty.h>
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/signal.h>
 #include <linux/ioctl.h>
+#include <linux/of.h>
+#include <linux/serdev.h>
 #include <linux/skbuff.h>
+#include <linux/ti_wilink_st.h>
 
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
+#include <linux/gpio/consumer.h>
 
 #include "hci_uart.h"
 
@@ -76,6 +80,12 @@ struct hcill_cmd {
 	u8 cmd;
 } __packed;
 
+struct ll_device {
+	struct hci_uart hu;
+	struct serdev_device *serdev;
+	struct gpio_desc *enable_gpio;
+};
+
 struct ll_struct {
 	unsigned long rx_state;
 	unsigned long rx_count;
@@ -136,6 +146,9 @@ static int ll_open(struct hci_uart *hu)
 
 	hu->priv = ll;
 
+	if (hu->serdev)
+		serdev_device_open(hu->serdev);
+
 	return 0;
 }
 
@@ -164,6 +177,13 @@ static int ll_close(struct hci_uart *hu)
 
 	kfree_skb(ll->rx_skb);
 
+	if (hu->serdev) {
+		struct ll_device *lldev = serdev_device_get_drvdata(hu->serdev);
+		gpiod_set_value_cansleep(lldev->enable_gpio, 0);
+
+		serdev_device_close(hu->serdev);
+	}
+
 	hu->priv = NULL;
 
 	kfree(ll);
@@ -505,9 +525,245 @@ static struct sk_buff *ll_dequeue(struct hci_uart *hu)
 	return skb_dequeue(&ll->txq);
 }
 
+#if IS_ENABLED(CONFIG_SERIAL_DEV_BUS)
+static int read_local_version(struct hci_dev *hdev)
+{
+	int err = 0;
+	unsigned short version = 0;
+	struct sk_buff *skb;
+	struct hci_rp_read_local_version *ver;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Reading TI version information failed (%ld)",
+			   PTR_ERR(skb));
+		err = PTR_ERR(skb);
+		goto out;
+	}
+	if (skb->len != sizeof(*ver)) {
+		err = -EILSEQ;
+		goto out;
+	}
+
+	ver = (struct hci_rp_read_local_version *)skb->data;
+	if (le16_to_cpu(ver->manufacturer) != 13) {
+		err = -ENODEV;
+		goto out;
+	}
+
+	version = le16_to_cpu(ver->lmp_subver);
+
+out:
+	if (err) bt_dev_err(hdev, "Failed to read TI version info: %d", err);
+	kfree_skb(skb);
+	return err ? err : version;
+}
+
+/**
+ * download_firmware -
+ *	internal function which parses through the .bts firmware
+ *	script file intreprets SEND, DELAY actions only as of now
+ */
+static int download_firmware(struct ll_device *lldev)
+{
+	unsigned short chip, min_ver, maj_ver;
+	int version, err, len;
+	unsigned char *ptr, *action_ptr;
+	unsigned char bts_scr_name[40];	/* 40 char long bts scr name? */
+	const struct firmware *fw;
+	struct sk_buff *skb;
+	struct hci_command *cmd;
+
+	version = read_local_version(lldev->hu.hdev);
+	if (version < 0)
+		return version;
+
+	chip = (version & 0x7C00) >> 10;
+	min_ver = (version & 0x007F);
+	maj_ver = (version & 0x0380) >> 7;
+	if (version & 0x8000)
+		maj_ver |= 0x0008;
+
+	snprintf(bts_scr_name, sizeof(bts_scr_name),
+		 "ti-connectivity/TIInit_%d.%d.%d.bts",
+		 chip, maj_ver, min_ver);
+
+	err = request_firmware(&fw, bts_scr_name, &lldev->serdev->dev);
+	if (err || !fw->data || !fw->size) {
+		bt_dev_err(lldev->hu.hdev, "request_firmware failed(errno %d) for %s",
+			   err, bts_scr_name);
+		return -EINVAL;
+	}
+	ptr = (void *)fw->data;
+	len = fw->size;
+	/* bts_header to remove out magic number and
+	 * version
+	 */
+	ptr += sizeof(struct bts_header);
+	len -= sizeof(struct bts_header);
+
+	while (len > 0 && ptr) {
+		bt_dev_dbg(lldev->hu.hdev, " action size %d, type %d ",
+			   ((struct bts_action *)ptr)->size,
+			   ((struct bts_action *)ptr)->type);
+
+		action_ptr = &(((struct bts_action *)ptr)->data[0]);
+
+		switch (((struct bts_action *)ptr)->type) {
+		case ACTION_SEND_COMMAND:	/* action send */
+			bt_dev_dbg(lldev->hu.hdev, "S");
+			cmd = (struct hci_command *)action_ptr;
+			if (cmd->opcode == 0xff36) {
+				/* ignore remote change
+				 * baud rate HCI VS command */
+				bt_dev_warn(lldev->hu.hdev, "change remote baud rate command in firmware");
+				break;
+			}
+			if (cmd->prefix != 1)
+				bt_dev_dbg(lldev->hu.hdev, "command type %d\n", cmd->prefix);
+
+			skb = __hci_cmd_sync(lldev->hu.hdev, cmd->opcode, cmd->plen, &cmd->speed, HCI_INIT_TIMEOUT);
+			if (IS_ERR(skb)) {
+				bt_dev_err(lldev->hu.hdev, "send command failed\n");
+				goto out_rel_fw;
+			}
+			kfree_skb(skb);
+			break;
+		case ACTION_WAIT_EVENT:  /* wait */
+			/* no need to wait as command was synchronous */
+			bt_dev_dbg(lldev->hu.hdev, "W");
+			break;
+		case ACTION_DELAY:	/* sleep */
+			bt_dev_info(lldev->hu.hdev, "sleep command in scr");
+			mdelay(((struct bts_action_delay *)action_ptr)->msec);
+			break;
+		}
+		len -= (sizeof(struct bts_action) +
+			((struct bts_action *)ptr)->size);
+		ptr += sizeof(struct bts_action) +
+			((struct bts_action *)ptr)->size;
+	}
+
+out_rel_fw:
+	/* fw download complete */
+	release_firmware(fw);
+	return err;
+}
+
+static int ll_setup(struct hci_uart *hu)
+{
+	int err, retry = 3;
+	struct ll_device *lldev;
+	struct serdev_device *serdev = hu->serdev;
+	u32 speed;
+
+	if (!serdev)
+		return 0;
+
+	lldev = serdev_device_get_drvdata(serdev);
+
+	serdev_device_set_flow_control(serdev, true);
+
+	do {
+		/* Configure BT_EN to HIGH state */
+		gpiod_set_value_cansleep(lldev->enable_gpio, 0);
+		msleep(5);
+		gpiod_set_value_cansleep(lldev->enable_gpio, 1);
+		msleep(100);
+
+		err = download_firmware(lldev);
+		if (!err)
+			break;
+
+		/* Toggle BT_EN and retry */
+		bt_dev_err(hu->hdev, "download firmware failed, retrying...");
+	} while (retry--);
+
+	if (err)
+		return err;
+
+	/* Operational speed if any */
+	if (hu->oper_speed)
+		speed = hu->oper_speed;
+	else if (hu->proto->oper_speed)
+		speed = hu->proto->oper_speed;
+	else
+		speed = 0;
+
+	if (speed) {
+		struct sk_buff *skb = __hci_cmd_sync(hu->hdev, 0xff36, sizeof(speed), &speed, HCI_INIT_TIMEOUT);
+		if (!IS_ERR(skb)) {
+			kfree_skb(skb);
+			serdev_device_set_baudrate(serdev, speed);
+		}
+	}
+
+	return 0;
+}
+
+static const struct hci_uart_proto llp;
+
+static int hci_ti_probe(struct serdev_device *serdev)
+{
+	struct hci_uart *hu;
+	struct ll_device *lldev;
+	u32 max_speed = 3000000;
+
+	lldev = devm_kzalloc(&serdev->dev, sizeof(struct ll_device), GFP_KERNEL);
+	if (!lldev)
+		return -ENOMEM;
+	hu = &lldev->hu;
+
+	serdev_device_set_drvdata(serdev, lldev);
+	lldev->serdev = hu->serdev = serdev;
+
+	lldev->enable_gpio = devm_gpiod_get_optional(&serdev->dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(lldev->enable_gpio))
+		return PTR_ERR(lldev->enable_gpio);
+
+	of_property_read_u32(serdev->dev.of_node, "max-speed", &max_speed);
+	hci_uart_set_speeds(hu, 115200, max_speed);
+
+	return hci_uart_register_device(hu, &llp);
+}
+
+static void hci_ti_remove(struct serdev_device *serdev)
+{
+	struct ll_device *lldev = serdev_device_get_drvdata(serdev);
+	struct hci_uart *hu = &lldev->hu;
+	struct hci_dev *hdev = hu->hdev;
+
+	cancel_work_sync(&hu->write_work);
+
+	hci_unregister_dev(hdev);
+	hci_free_dev(hdev);
+	hu->proto->close(hu);
+}
+
+static const struct of_device_id hci_ti_of_match[] = {
+	{ .compatible = "ti,wl1831-st" },
+	{ .compatible = "ti,wl1835-st" },
+	{ .compatible = "ti,wl1837-st" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, hci_ti_of_match);
+
+static struct serdev_device_driver hci_ti_drv = {
+	.driver		= {
+		.name	= "hci-ti",
+		.of_match_table = of_match_ptr(hci_ti_of_match),
+	},
+	.probe	= hci_ti_probe,
+	.remove	= hci_ti_remove,
+};
+#else
+#define ll_setup NULL
+#endif
+
 static const struct hci_uart_proto llp = {
 	.id		= HCI_UART_LL,
 	.name		= "LL",
+	.setup		= ll_setup,
 	.open		= ll_open,
 	.close		= ll_close,
 	.recv		= ll_recv,
@@ -518,10 +774,14 @@ static const struct hci_uart_proto llp = {
 
 int __init ll_init(void)
 {
+	serdev_device_driver_register(&hci_ti_drv);
+
 	return hci_uart_register_proto(&llp);
 }
 
 int __exit ll_deinit(void)
 {
+	serdev_device_driver_unregister(&hci_ti_drv);
+
 	return hci_uart_unregister_proto(&llp);
 }

drivers/bluetooth/hci_serdev.c

+/*
+ *  Bluetooth HCI serdev driver lib
+ *
+ *  Copyright (C) 2017  Linaro, Ltd., Rob Herring <robh@kernel.org>
+ *
+ *  Based on hci_ldisc.c:
+ *
+ *  Copyright (C) 2000-2001  Qualcomm Incorporated
+ *  Copyright (C) 2002-2003  Maxim Krasnyansky <maxk@qualcomm.com>
+ *  Copyright (C) 2004-2005  Marcel Holtmann <marcel@holtmann.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/serdev.h>
+#include <linux/skbuff.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "hci_uart.h"
+
+struct serdev_device_ops hci_serdev_client_ops;
+
+static inline void hci_uart_tx_complete(struct hci_uart *hu, int pkt_type)
+{
+	struct hci_dev *hdev = hu->hdev;
+
+	/* Update HCI stat counters */
+	switch (pkt_type) {
+	case HCI_COMMAND_PKT:
+		hdev->stat.cmd_tx++;
+		break;
+
+	case HCI_ACLDATA_PKT:
+		hdev->stat.acl_tx++;
+		break;
+
+	case HCI_SCODATA_PKT:
+		hdev->stat.sco_tx++;
+		break;
+	}
+}
+
+static inline struct sk_buff *hci_uart_dequeue(struct hci_uart *hu)
+{
+	struct sk_buff *skb = hu->tx_skb;
+
+	if (!skb)
+		skb = hu->proto->dequeue(hu);
+	else
+		hu->tx_skb = NULL;
+
+	return skb;
+}
+
+static void hci_uart_write_work(struct work_struct *work)
+{
+	struct hci_uart *hu = container_of(work, struct hci_uart, write_work);
+	struct serdev_device *serdev = hu->serdev;
+	struct hci_dev *hdev = hu->hdev;
+	struct sk_buff *skb;
+
+	/* REVISIT:
+	 * should we cope with bad skbs or ->write() returning an error value?
+	 */
+	do {
+		clear_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
+
+		while ((skb = hci_uart_dequeue(hu))) {
+			int len;
+
+			len = serdev_device_write_buf(serdev,
+						      skb->data, skb->len);
+			hdev->stat.byte_tx += len;
+
+			skb_pull(skb, len);
+			if (skb->len) {
+				hu->tx_skb = skb;
+				break;
+			}
+
+			hci_uart_tx_complete(hu, hci_skb_pkt_type(skb));
+			kfree_skb(skb);
+		}
+	} while(test_bit(HCI_UART_TX_WAKEUP, &hu->tx_state));
+
+	clear_bit(HCI_UART_SENDING, &hu->tx_state);
+}
+
+/* ------- Interface to HCI layer ------ */
+
+/* Initialize device */
+static int hci_uart_open(struct hci_dev *hdev)
+{
+	BT_DBG("%s %p", hdev->name, hdev);
+
+	return 0;
+}
+
+/* Reset device */
+static int hci_uart_flush(struct hci_dev *hdev)
+{
+	struct hci_uart *hu  = hci_get_drvdata(hdev);
+
+	BT_DBG("hdev %p serdev %p", hdev, hu->serdev);
+
+	if (hu->tx_skb) {
+		kfree_skb(hu->tx_skb); hu->tx_skb = NULL;
+	}
+
+	/* Flush any pending characters in the driver and discipline. */
+	serdev_device_write_flush(hu->serdev);
+
+	if (test_bit(HCI_UART_PROTO_READY, &hu->flags))
+		hu->proto->flush(hu);
+
+	return 0;
+}
+
+/* Close device */
+static int hci_uart_close(struct hci_dev *hdev)
+{
+	BT_DBG("hdev %p", hdev);
+
+	hci_uart_flush(hdev);
+	hdev->flush = NULL;
+
+	return 0;
+}
+
+/* Send frames from HCI layer */
+static int hci_uart_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+
+	BT_DBG("%s: type %d len %d", hdev->name, hci_skb_pkt_type(skb),
+	       skb->len);
+
+	hu->proto->enqueue(hu, skb);
+
+	hci_uart_tx_wakeup(hu);
+
+	return 0;
+}
+
+static int hci_uart_setup(struct hci_dev *hdev)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct hci_rp_read_local_version *ver;
+	struct sk_buff *skb;
+	unsigned int speed;
+	int err;
+
+	/* Init speed if any */
+	if (hu->init_speed)
+		speed = hu->init_speed;
+	else if (hu->proto->init_speed)
+		speed = hu->proto->init_speed;
+	else
+		speed = 0;
+
+	if (speed)
+		serdev_device_set_baudrate(hu->serdev, speed);
+
+	/* Operational speed if any */
+	if (hu->oper_speed)
+		speed = hu->oper_speed;
+	else if (hu->proto->oper_speed)
+		speed = hu->proto->oper_speed;
+	else
+		speed = 0;
+
+	if (hu->proto->set_baudrate && speed) {
+		err = hu->proto->set_baudrate(hu, speed);
+		if (err)
+			BT_ERR("%s: failed to set baudrate", hdev->name);
+		else
+			serdev_device_set_baudrate(hu->serdev, speed);
+	}
+
+	if (hu->proto->setup)
+		return hu->proto->setup(hu);
+
+	if (!test_bit(HCI_UART_VND_DETECT, &hu->hdev_flags))
+		return 0;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s: Reading local version information failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return 0;
+	}
+
+	if (skb->len != sizeof(*ver)) {
+		BT_ERR("%s: Event length mismatch for version information",
+		       hdev->name);
+	}
+
+	kfree_skb(skb);
+	return 0;
+}
+
+/** hci_uart_write_wakeup - transmit buffer wakeup
+ * @serdev: serial device
+ *
+ * This function is called by the serdev framework when it accepts
+ * more data being sent.
+ */
+static void hci_uart_write_wakeup(struct serdev_device *serdev)
+{
+	struct hci_uart *hu = serdev_device_get_drvdata(serdev);
+
+	BT_DBG("");
+
+	if (!hu || serdev != hu->serdev) {
+		WARN_ON(1);
+		return;
+	}
+
+	if (test_bit(HCI_UART_PROTO_READY, &hu->flags))
+		hci_uart_tx_wakeup(hu);
+}
+
+/** hci_uart_receive_buf - receive buffer wakeup
+ * @serdev: serial device
+ * @data:   pointer to received data
+ * @count:  count of received data in bytes
+ *
+ * This function is called by the serdev framework when it received data
+ * in the RX buffer.
+ *
+ * Return: number of processed bytes
+ */
+static int hci_uart_receive_buf(struct serdev_device *serdev, const u8 *data,
+				   size_t count)
+{
+	struct hci_uart *hu = serdev_device_get_drvdata(serdev);
+
+	if (!hu || serdev != hu->serdev) {
+		WARN_ON(1);
+		return 0;
+	}
+
+	if (!test_bit(HCI_UART_PROTO_READY, &hu->flags))
+		return 0;
+
+	/* It does not need a lock here as it is already protected by a mutex in
+	 * tty caller
+	 */
+	hu->proto->recv(hu, data, count);
+
+	if (hu->hdev)
+		hu->hdev->stat.byte_rx += count;
+
+	return count;
+}
+
+struct serdev_device_ops hci_serdev_client_ops = {
+	.receive_buf = hci_uart_receive_buf,
+	.write_wakeup = hci_uart_write_wakeup,
+};
+
+int hci_uart_register_device(struct hci_uart *hu,
+			     const struct hci_uart_proto *p)
+{
+	int err;
+	struct hci_dev *hdev;
+
+	BT_DBG("");
+
+	serdev_device_set_client_ops(hu->serdev, &hci_serdev_client_ops);
+
+	err = p->open(hu);
+	if (err)
+		return err;
+
+	hu->proto = p;
+	set_bit(HCI_UART_PROTO_READY, &hu->flags);
+
+	/* Initialize and register HCI device */
+	hdev = hci_alloc_dev();
+	if (!hdev) {
+		BT_ERR("Can't allocate HCI device");
+		err = -ENOMEM;
+		goto err_alloc;
+	}
+
+	hu->hdev = hdev;
+
+	hdev->bus = HCI_UART;
+	hci_set_drvdata(hdev, hu);
+
+	INIT_WORK(&hu->write_work, hci_uart_write_work);
+
+	/* Only when vendor specific setup callback is provided, consider
+	 * the manufacturer information valid. This avoids filling in the
+	 * value for Ericsson when nothing is specified.
+	 */
+	if (hu->proto->setup)
+		hdev->manufacturer = hu->proto->manufacturer;
+
+	hdev->open  = hci_uart_open;
+	hdev->close = hci_uart_close;
+	hdev->flush = hci_uart_flush;
+	hdev->send  = hci_uart_send_frame;
+	hdev->setup = hci_uart_setup;
+	SET_HCIDEV_DEV(hdev, &hu->serdev->dev);
+
+	if (test_bit(HCI_UART_RAW_DEVICE, &hu->hdev_flags))
+		set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
+
+	if (test_bit(HCI_UART_EXT_CONFIG, &hu->hdev_flags))
+		set_bit(HCI_QUIRK_EXTERNAL_CONFIG, &hdev->quirks);
+
+	if (!test_bit(HCI_UART_RESET_ON_INIT, &hu->hdev_flags))
+		set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
+
+	if (test_bit(HCI_UART_CREATE_AMP, &hu->hdev_flags))
+		hdev->dev_type = HCI_AMP;
+	else
+		hdev->dev_type = HCI_PRIMARY;
+
+	if (test_bit(HCI_UART_INIT_PENDING, &hu->hdev_flags))
+		return 0;
+
+	if (hci_register_dev(hdev) < 0) {
+		BT_ERR("Can't register HCI device");
+		err = -ENODEV;
+		goto err_register;
+	}
+
+	set_bit(HCI_UART_REGISTERED, &hu->flags);
+
+	return 0;
+
+err_register:
+	hci_free_dev(hdev);
+err_alloc:
+	clear_bit(HCI_UART_PROTO_READY, &hu->flags);
+	p->close(hu);
+	return err;
+}
+EXPORT_SYMBOL_GPL(hci_uart_register_device);

drivers/bluetooth/hci_uart.h

@@ -58,6 +58,7 @@
 #define HCI_UART_VND_DETECT	5
 
 struct hci_uart;
+struct serdev_device;
 
 struct hci_uart_proto {
 	unsigned int id;
@@ -77,6 +78,7 @@ struct hci_uart_proto {
 
 struct hci_uart {
 	struct tty_struct	*tty;
+	struct serdev_device	*serdev;
 	struct hci_dev		*hdev;
 	unsigned long		flags;
 	unsigned long		hdev_flags;
@@ -92,6 +94,9 @@ struct hci_uart {
 
 	unsigned int init_speed;
 	unsigned int oper_speed;
+
+	u8			alignment;
+	u8			padding;
 };
 
 /* HCI_UART proto flag bits */
@@ -105,9 +110,10 @@ struct hci_uart {
 
 int hci_uart_register_proto(const struct hci_uart_proto *p);
 int hci_uart_unregister_proto(const struct hci_uart_proto *p);
+int hci_uart_register_device(struct hci_uart *hu, const struct hci_uart_proto *p);
+
 int hci_uart_tx_wakeup(struct hci_uart *hu);
 int hci_uart_init_ready(struct hci_uart *hu);
-void hci_uart_init_tty(struct hci_uart *hu);
 void hci_uart_set_baudrate(struct hci_uart *hu, unsigned int speed);
 void hci_uart_set_flow_control(struct hci_uart *hu, bool enable);
 void hci_uart_set_speeds(struct hci_uart *hu, unsigned int init_speed,

drivers/net/ieee802154/Kconfig

@@ -82,3 +82,25 @@ config IEEE802154_ADF7242
 
 	  This driver can also be built as a module. To do so, say M here.
 	  the module will be called 'adf7242'.
+
+config IEEE802154_CA8210
+	tristate "Cascoda CA8210 transceiver driver"
+	depends on IEEE802154_DRIVERS && MAC802154
+	depends on SPI
+	select COMMON_CLK
+	---help---
+	  Say Y here to enable the CA8210 SPI 802.15.4 wireless
+	  controller.
+
+	  This driver can also be built as a module. To do so, say M here.
+	  the module will be called 'ca8210'.
+
+config IEEE802154_CA8210_DEBUGFS
+	bool "CA8210 debugfs interface"
+	depends on IEEE802154_CA8210
+	depends on DEBUG_FS
+	---help---
+	  This option compiles debugfs code for the ca8210 driver. This
+	  exposes a debugfs node for each CA8210 instance which allows
+	  direct use of the Cascoda API, exposing the 802.15.4 MAC
+	  management entities.

drivers/net/ieee802154/Makefile

@@ -4,3 +4,4 @@ obj-$(CONFIG_IEEE802154_MRF24J40) += mrf24j40.o
 obj-$(CONFIG_IEEE802154_CC2520) += cc2520.o
 obj-$(CONFIG_IEEE802154_ATUSB) += atusb.o
 obj-$(CONFIG_IEEE802154_ADF7242) += adf7242.o
+obj-$(CONFIG_IEEE802154_CA8210) += ca8210.o

drivers/tty/serdev/core.c

@@ -173,6 +173,39 @@ void serdev_device_set_flow_control(struct serdev_device *serdev, bool enable)
 }
 EXPORT_SYMBOL_GPL(serdev_device_set_flow_control);
 
+void serdev_device_wait_until_sent(struct serdev_device *serdev, long timeout)
+{
+	struct serdev_controller *ctrl = serdev->ctrl;
+
+	if (!ctrl || !ctrl->ops->wait_until_sent)
+		return;
+
+	ctrl->ops->wait_until_sent(ctrl, timeout);
+}
+EXPORT_SYMBOL_GPL(serdev_device_wait_until_sent);
+
+int serdev_device_get_tiocm(struct serdev_device *serdev)
+{
+	struct serdev_controller *ctrl = serdev->ctrl;
+
+	if (!ctrl || !ctrl->ops->get_tiocm)
+		return -ENOTSUPP;
+
+	return ctrl->ops->get_tiocm(ctrl);
+}
+EXPORT_SYMBOL_GPL(serdev_device_get_tiocm);
+
+int serdev_device_set_tiocm(struct serdev_device *serdev, int set, int clear)
+{
+	struct serdev_controller *ctrl = serdev->ctrl;
+
+	if (!ctrl || !ctrl->ops->set_tiocm)
+		return -ENOTSUPP;
+
+	return ctrl->ops->set_tiocm(ctrl, set, clear);
+}
+EXPORT_SYMBOL_GPL(serdev_device_set_tiocm);
+
 static int serdev_drv_probe(struct device *dev)
 {
 	const struct serdev_device_driver *sdrv = to_serdev_device_driver(dev->driver);

drivers/tty/serdev/serdev-ttyport.c

@@ -14,6 +14,7 @@
 #include <linux/serdev.h>
 #include <linux/tty.h>
 #include <linux/tty_driver.h>
+#include <linux/poll.h>
 
 #define SERPORT_ACTIVE		1
 
@@ -46,11 +47,11 @@ static void ttyport_write_wakeup(struct tty_port *port)
 	struct serdev_controller *ctrl = port->client_data;
 	struct serport *serport = serdev_controller_get_drvdata(ctrl);
 
-	if (!test_and_clear_bit(TTY_DO_WRITE_WAKEUP, &port->tty->flags))
-		return;
-
-	if (test_bit(SERPORT_ACTIVE, &serport->flags))
+	if (test_and_clear_bit(TTY_DO_WRITE_WAKEUP, &port->tty->flags) &&
+	    test_bit(SERPORT_ACTIVE, &serport->flags))
 		serdev_controller_write_wakeup(ctrl);
+
+	wake_up_interruptible_poll(&port->tty->write_wait, POLLOUT);
 }
 
 static const struct tty_port_client_operations client_ops = {
@@ -167,6 +168,36 @@ static void ttyport_set_flow_control(struct serdev_controller *ctrl, bool enable
 	tty_set_termios(tty, &ktermios);
 }
 
+static void ttyport_wait_until_sent(struct serdev_controller *ctrl, long timeout)
+{
+	struct serport *serport = serdev_controller_get_drvdata(ctrl);
+	struct tty_struct *tty = serport->tty;
+
+	tty_wait_until_sent(tty, timeout);
+}
+
+static int ttyport_get_tiocm(struct serdev_controller *ctrl)
+{
+	struct serport *serport = serdev_controller_get_drvdata(ctrl);
+	struct tty_struct *tty = serport->tty;
+
+	if (!tty->ops->tiocmget)
+		return -ENOTSUPP;
+
+	return tty->driver->ops->tiocmget(tty);
+}
+
+static int ttyport_set_tiocm(struct serdev_controller *ctrl, unsigned int set, unsigned int clear)
+{
+	struct serport *serport = serdev_controller_get_drvdata(ctrl);
+	struct tty_struct *tty = serport->tty;
+
+	if (!tty->ops->tiocmset)
+		return -ENOTSUPP;
+
+	return tty->driver->ops->tiocmset(tty, set, clear);
+}
+
 static const struct serdev_controller_ops ctrl_ops = {
 	.write_buf = ttyport_write_buf,
 	.write_flush = ttyport_write_flush,
@@ -175,6 +206,9 @@ static const struct serdev_controller_ops ctrl_ops = {
 	.close = ttyport_close,
 	.set_flow_control = ttyport_set_flow_control,
 	.set_baudrate = ttyport_set_baudrate,
+	.wait_until_sent = ttyport_wait_until_sent,
+	.get_tiocm = ttyport_get_tiocm,
+	.set_tiocm = ttyport_set_tiocm,
 };
 
 struct device *serdev_tty_port_register(struct tty_port *port,

drivers/tty/serial/omap-serial.c

@@ -1597,6 +1597,9 @@ static struct omap_uart_port_info *of_get_uart_port_info(struct device *dev)
 
 	of_property_read_u32(dev->of_node, "clock-frequency",
 					 &omap_up_info->uartclk);
+
+	omap_up_info->flags = UPF_BOOT_AUTOCONF;
+
 	return omap_up_info;
 }
 

include/linux/serdev.h

@@ -15,6 +15,8 @@
 
 #include <linux/types.h>
 #include <linux/device.h>
+#include <linux/termios.h>
+#include <linux/delay.h>
 
 struct serdev_controller;
 struct serdev_device;
@@ -81,6 +83,9 @@ struct serdev_controller_ops {
 	void (*close)(struct serdev_controller *);
 	void (*set_flow_control)(struct serdev_controller *, bool);
 	unsigned int (*set_baudrate)(struct serdev_controller *, unsigned int);
+	void (*wait_until_sent)(struct serdev_controller *, long);
+	int (*get_tiocm)(struct serdev_controller *);
+	int (*set_tiocm)(struct serdev_controller *, unsigned int, unsigned int);
 };
 
 /**
@@ -186,6 +191,9 @@ int serdev_device_open(struct serdev_device *);
 void serdev_device_close(struct serdev_device *);
 unsigned int serdev_device_set_baudrate(struct serdev_device *, unsigned int);
 void serdev_device_set_flow_control(struct serdev_device *, bool);
+void serdev_device_wait_until_sent(struct serdev_device *, long);
+int serdev_device_get_tiocm(struct serdev_device *);
+int serdev_device_set_tiocm(struct serdev_device *, int, int);
 int serdev_device_write_buf(struct serdev_device *, const unsigned char *, size_t);
 void serdev_device_write_flush(struct serdev_device *);
 int serdev_device_write_room(struct serdev_device *);
@@ -223,6 +231,15 @@ static inline unsigned int serdev_device_set_baudrate(struct serdev_device *sdev
 	return 0;
 }
 static inline void serdev_device_set_flow_control(struct serdev_device *sdev, bool enable) {}
+static inline void serdev_device_wait_until_sent(struct serdev_device *sdev, long timeout) {}
+static inline int serdev_device_get_tiocm(struct serdev_device *serdev)
+{
+	return -ENOTSUPP;
+}
+static inline int serdev_device_set_tiocm(struct serdev_device *serdev, int set, int clear)
+{
+	return -ENOTSUPP;
+}
 static inline int serdev_device_write_buf(struct serdev_device *sdev, const unsigned char *buf, size_t count)
 {
 	return -ENODEV;
@@ -238,6 +255,36 @@ static inline int serdev_device_write_room(struct serdev_device *sdev)
 
 #endif /* CONFIG_SERIAL_DEV_BUS */
 
+static inline bool serdev_device_get_cts(struct serdev_device *serdev)
+{
+	int status = serdev_device_get_tiocm(serdev);
+	return !!(status & TIOCM_CTS);
+}
+
+static inline int serdev_device_wait_for_cts(struct serdev_device *serdev, bool state, int timeout_ms)
+{
+	unsigned long timeout;
+	bool signal;
+
+	timeout = jiffies + msecs_to_jiffies(timeout_ms);
+	while (time_is_after_jiffies(timeout)) {
+		signal = serdev_device_get_cts(serdev);
+		if (signal == state)
+			return 0;
+		usleep_range(1000, 2000);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static inline int serdev_device_set_rts(struct serdev_device *serdev, bool enable)
+{
+	if (enable)
+		return serdev_device_set_tiocm(serdev, TIOCM_RTS, 0);
+	else
+		return serdev_device_set_tiocm(serdev, 0, TIOCM_RTS);
+}
+
 /*
  * serdev hooks into TTY core
  */

include/net/6lowpan.h

@@ -198,6 +198,21 @@ static inline void lowpan_iphc_uncompress_eui64_lladdr(struct in6_addr *ipaddr,
 	ipaddr->s6_addr[8] ^= 0x02;
 }
 
+static inline void lowpan_iphc_uncompress_eui48_lladdr(struct in6_addr *ipaddr,
+						       const void *lladdr)
+{
+	/* fe:80::XXXX:XXff:feXX:XXXX
+	 *        \_________________/
+	 *              hwaddr
+	 */
+	ipaddr->s6_addr[0] = 0xFE;
+	ipaddr->s6_addr[1] = 0x80;
+	memcpy(&ipaddr->s6_addr[8], lladdr, 3);
+	ipaddr->s6_addr[11] = 0xFF;
+	ipaddr->s6_addr[12] = 0xFE;
+	memcpy(&ipaddr->s6_addr[13], lladdr + 3, 3);
+}
+
 #ifdef DEBUG
 /* print data in line */
 static inline void raw_dump_inline(const char *caller, char *msg,

include/net/bluetooth/l2cap.h

@@ -282,7 +282,7 @@ struct l2cap_conn_rsp {
 #define L2CAP_CR_BAD_KEY_SIZE	0x0007
 #define L2CAP_CR_ENCRYPTION	0x0008
 #define L2CAP_CR_INVALID_SCID	0x0009
-#define L2CAP_CR_SCID_IN_USE	0x0010
+#define L2CAP_CR_SCID_IN_USE	0x000A
 
 /* connect/create channel status */
 #define L2CAP_CS_NO_INFO	0x0000

include/net/bluetooth/rfcomm.h

@@ -21,6 +21,8 @@
    SOFTWARE IS DISCLAIMED.
 */
 
+#include <linux/refcount.h>
+
 #ifndef __RFCOMM_H
 #define __RFCOMM_H
 
@@ -174,7 +176,7 @@ struct rfcomm_dlc {
 	struct mutex  lock;
 	unsigned long state;
 	unsigned long flags;
-	atomic_t      refcnt;
+	refcount_t    refcnt;
 	u8            dlci;
 	u8            addr;
 	u8            priority;
@@ -247,12 +249,12 @@ struct rfcomm_dlc *rfcomm_dlc_exists(bdaddr_t *src, bdaddr_t *dst, u8 channel);
 
 static inline void rfcomm_dlc_hold(struct rfcomm_dlc *d)
 {
-	atomic_inc(&d->refcnt);
+	refcount_inc(&d->refcnt);
 }
 
 static inline void rfcomm_dlc_put(struct rfcomm_dlc *d)
 {
-	if (atomic_dec_and_test(&d->refcnt))
+	if (refcount_dec_and_test(&d->refcnt))
 		rfcomm_dlc_free(d);
 }
 

net/6lowpan/core.c

@@ -23,10 +23,18 @@ int lowpan_register_netdevice(struct net_device *dev,
 {
 	int i, ret;
 
+	switch (lltype) {
+	case LOWPAN_LLTYPE_IEEE802154:
 		dev->addr_len = EUI64_ADDR_LEN;
+		break;
+
+	case LOWPAN_LLTYPE_BTLE:
+		dev->addr_len = ETH_ALEN;
+		break;
+	}
+
 	dev->type = ARPHRD_6LOWPAN;
 	dev->mtu = IPV6_MIN_MTU;
-	dev->priv_flags |= IFF_NO_QUEUE;
 
 	lowpan_dev(dev)->lltype = lltype;
 

net/6lowpan/iphc.c

@@ -278,6 +278,23 @@ lowpan_iphc_ctx_get_by_mcast_addr(const struct net_device *dev,
 	return ret;
 }
 
+static void lowpan_iphc_uncompress_lladdr(const struct net_device *dev,
+					  struct in6_addr *ipaddr,
+					  const void *lladdr)
+{
+	switch (dev->addr_len) {
+	case ETH_ALEN:
+		lowpan_iphc_uncompress_eui48_lladdr(ipaddr, lladdr);
+		break;
+	case EUI64_ADDR_LEN:
+		lowpan_iphc_uncompress_eui64_lladdr(ipaddr, lladdr);
+		break;
+	default:
+		WARN_ON_ONCE(1);
+		break;
+	}
+}
+
 /* Uncompress address function for source and
  * destination address(non-multicast).
  *
@@ -320,7 +337,7 @@ static int lowpan_iphc_uncompress_addr(struct sk_buff *skb,
 			lowpan_iphc_uncompress_802154_lladdr(ipaddr, lladdr);
 			break;
 		default:
-			lowpan_iphc_uncompress_eui64_lladdr(ipaddr, lladdr);
+			lowpan_iphc_uncompress_lladdr(dev, ipaddr, lladdr);
 			break;
 		}
 		break;
@@ -381,7 +398,7 @@ static int lowpan_iphc_uncompress_ctx_addr(struct sk_buff *skb,
 			lowpan_iphc_uncompress_802154_lladdr(ipaddr, lladdr);
 			break;
 		default:
-			lowpan_iphc_uncompress_eui64_lladdr(ipaddr, lladdr);
+			lowpan_iphc_uncompress_lladdr(dev, ipaddr, lladdr);
 			break;
 		}
 		ipv6_addr_prefix_copy(ipaddr, &ctx->pfx, ctx->plen);
@@ -666,6 +683,8 @@ int lowpan_header_decompress(struct sk_buff *skb, const struct net_device *dev,
 
 	switch (iphc1 & (LOWPAN_IPHC_M | LOWPAN_IPHC_DAC)) {
 	case LOWPAN_IPHC_M | LOWPAN_IPHC_DAC:
+		skb->pkt_type = PACKET_BROADCAST;
+
 		spin_lock_bh(&lowpan_dev(dev)->ctx.lock);
 		ci = lowpan_iphc_ctx_get_by_id(dev, LOWPAN_IPHC_CID_DCI(cid));
 		if (!ci) {
@@ -681,11 +700,15 @@ int lowpan_header_decompress(struct sk_buff *skb, const struct net_device *dev,
 		spin_unlock_bh(&lowpan_dev(dev)->ctx.lock);
 		break;
 	case LOWPAN_IPHC_M:
+		skb->pkt_type = PACKET_BROADCAST;
+
 		/* multicast */
 		err = lowpan_uncompress_multicast_daddr(skb, &hdr.daddr,
 							iphc1 & LOWPAN_IPHC_DAM_MASK);
 		break;
 	case LOWPAN_IPHC_DAC:
+		skb->pkt_type = PACKET_HOST;
+
 		spin_lock_bh(&lowpan_dev(dev)->ctx.lock);
 		ci = lowpan_iphc_ctx_get_by_id(dev, LOWPAN_IPHC_CID_DCI(cid));
 		if (!ci) {
@@ -701,6 +724,8 @@ int lowpan_header_decompress(struct sk_buff *skb, const struct net_device *dev,
 		spin_unlock_bh(&lowpan_dev(dev)->ctx.lock);
 		break;
 	default:
+		skb->pkt_type = PACKET_HOST;
+
 		err = lowpan_iphc_uncompress_addr(skb, dev, &hdr.daddr,
 						  iphc1 & LOWPAN_IPHC_DAM_MASK,
 						  daddr);
@@ -802,6 +827,21 @@ lowpan_iphc_compress_ctx_802154_lladdr(const struct in6_addr *ipaddr,
 	return lladdr_compress;
 }
 
+static bool lowpan_iphc_addr_equal(const struct net_device *dev,
+				   const struct lowpan_iphc_ctx *ctx,
+				   const struct in6_addr *ipaddr,
+				   const void *lladdr)
+{
+	struct in6_addr tmp = {};
+
+	lowpan_iphc_uncompress_lladdr(dev, &tmp, lladdr);
+
+	if (ctx)
+		ipv6_addr_prefix_copy(&tmp, &ctx->pfx, ctx->plen);
+
+	return ipv6_addr_equal(&tmp, ipaddr);
+}
+
 static u8 lowpan_compress_ctx_addr(u8 **hc_ptr, const struct net_device *dev,
 				   const struct in6_addr *ipaddr,
 				   const struct lowpan_iphc_ctx *ctx,
@@ -819,13 +859,7 @@ static u8 lowpan_compress_ctx_addr(u8 **hc_ptr, const struct net_device *dev,
 		}
 		break;
 	default:
-		/* check for SAM/DAM = 11 */
-		memcpy(&tmp.s6_addr[8], lladdr, EUI64_ADDR_LEN);
-		/* second bit-flip (Universe/Local) is done according RFC2464 */
-		tmp.s6_addr[8] ^= 0x02;
-		/* context information are always used */
-		ipv6_addr_prefix_copy(&tmp, &ctx->pfx, ctx->plen);
-		if (ipv6_addr_equal(&tmp, ipaddr)) {
+		if (lowpan_iphc_addr_equal(dev, ctx, ipaddr, lladdr)) {
 			dam = LOWPAN_IPHC_DAM_11;
 			goto out;
 		}
@@ -921,11 +955,12 @@ static u8 lowpan_compress_addr_64(u8 **hc_ptr, const struct net_device *dev,
 		}
 		break;
 	default:
-		if (is_addr_mac_addr_based(ipaddr, lladdr)) {
-			dam = LOWPAN_IPHC_DAM_11; /* 0-bits */
+		if (lowpan_iphc_addr_equal(dev, NULL, ipaddr, lladdr)) {
+			dam = LOWPAN_IPHC_DAM_11;
 			pr_debug("address compression 0 bits\n");
 			goto out;
 		}
+
 		break;
 	}
 

net/bluetooth/6lowpan.c

@@ -20,6 +20,7 @@
 #include <net/ipv6.h>
 #include <net/ip6_route.h>
 #include <net/addrconf.h>
+#include <net/pkt_sched.h>
 
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
@@ -38,7 +39,6 @@ struct skb_cb {
 	struct in6_addr addr;
 	struct in6_addr gw;
 	struct l2cap_chan *chan;
-	int status;
 };
 #define lowpan_cb(skb) ((struct skb_cb *)((skb)->cb))
 
@@ -64,7 +64,7 @@ struct lowpan_peer {
 	struct l2cap_chan *chan;
 
 	/* peer addresses in various formats */
-	unsigned char eui64_addr[EUI64_ADDR_LEN];
+	unsigned char lladdr[ETH_ALEN];
 	struct in6_addr peer_addr;
 };
 
@@ -270,28 +270,20 @@ static int give_skb_to_upper(struct sk_buff *skb, struct net_device *dev)
 }
 
 static int iphc_decompress(struct sk_buff *skb, struct net_device *netdev,
-			   struct l2cap_chan *chan)
+			   struct lowpan_peer *peer)
 {
-	const u8 *saddr, *daddr;
+	const u8 *saddr;
 	struct lowpan_btle_dev *dev;
-	struct lowpan_peer *peer;
 
 	dev = lowpan_btle_dev(netdev);
 
-	rcu_read_lock();
-	peer = __peer_lookup_chan(dev, chan);
-	rcu_read_unlock();
-	if (!peer)
-		return -EINVAL;
-
-	saddr = peer->eui64_addr;
-	daddr = dev->netdev->dev_addr;
+	saddr = peer->lladdr;
 
-	return lowpan_header_decompress(skb, netdev, daddr, saddr);
+	return lowpan_header_decompress(skb, netdev, netdev->dev_addr, saddr);
 }
 
 static int recv_pkt(struct sk_buff *skb, struct net_device *dev,
-		    struct l2cap_chan *chan)
+		    struct lowpan_peer *peer)
 {
 	struct sk_buff *local_skb;
 	int ret;
@@ -344,8 +336,9 @@ static int recv_pkt(struct sk_buff *skb, struct net_device *dev,
 
 		local_skb->dev = dev;
 
-		ret = iphc_decompress(local_skb, dev, chan);
+		ret = iphc_decompress(local_skb, dev, peer);
 		if (ret < 0) {
+			BT_DBG("iphc_decompress failed: %d", ret);
 			kfree_skb(local_skb);
 			goto drop;
 		}
@@ -365,6 +358,7 @@ static int recv_pkt(struct sk_buff *skb, struct net_device *dev,
 		consume_skb(local_skb);
 		consume_skb(skb);
 	} else {
+		BT_DBG("unknown packet type");
 		goto drop;
 	}
 
@@ -390,7 +384,7 @@ static int chan_recv_cb(struct l2cap_chan *chan, struct sk_buff *skb)
 	if (!dev || !dev->netdev)
 		return -ENOENT;
 
-	err = recv_pkt(skb, dev->netdev, chan);
+	err = recv_pkt(skb, dev->netdev, peer);
 	if (err) {
 		BT_DBG("recv pkt %d", err);
 		err = -EAGAIN;
@@ -399,37 +393,6 @@ static int chan_recv_cb(struct l2cap_chan *chan, struct sk_buff *skb)
 	return err;
 }
 
-static u8 get_addr_type_from_eui64(u8 byte)
-{
-	/* Is universal(0) or local(1) bit */
-	return ((byte & 0x02) ? BDADDR_LE_RANDOM : BDADDR_LE_PUBLIC);
-}
-
-static void copy_to_bdaddr(struct in6_addr *ip6_daddr, bdaddr_t *addr)
-{
-	u8 *eui64 = ip6_daddr->s6_addr + 8;
-
-	addr->b[0] = eui64[7];
-	addr->b[1] = eui64[6];
-	addr->b[2] = eui64[5];
-	addr->b[3] = eui64[2];
-	addr->b[4] = eui64[1];
-	addr->b[5] = eui64[0];
-}
-
-static void convert_dest_bdaddr(struct in6_addr *ip6_daddr,
-				bdaddr_t *addr, u8 *addr_type)
-{
-	copy_to_bdaddr(ip6_daddr, addr);
-
-	/* We need to toggle the U/L bit that we got from IPv6 address
-	 * so that we get the proper address and type of the BD address.
-	 */
-	addr->b[5] ^= 0x02;
-
-	*addr_type = get_addr_type_from_eui64(addr->b[5]);
-}
-
 static int setup_header(struct sk_buff *skb, struct net_device *netdev,
 			bdaddr_t *peer_addr, u8 *peer_addr_type)
 {
@@ -437,8 +400,7 @@ static int setup_header(struct sk_buff *skb, struct net_device *netdev,
 	struct ipv6hdr *hdr;
 	struct lowpan_btle_dev *dev;
 	struct lowpan_peer *peer;
-	bdaddr_t addr, *any = BDADDR_ANY;
-	u8 *daddr = any->b;
+	u8 *daddr;
 	int err, status = 0;
 
 	hdr = ipv6_hdr(skb);
@@ -449,19 +411,10 @@ static int setup_header(struct sk_buff *skb, struct net_device *netdev,
 
 	if (ipv6_addr_is_multicast(&ipv6_daddr)) {
 		lowpan_cb(skb)->chan = NULL;
+		daddr = NULL;
 	} else {
-		u8 addr_type;
-
-		/* Get destination BT device from skb.
-		 * If there is no such peer then discard the packet.
-		 */
-		convert_dest_bdaddr(&ipv6_daddr, &addr, &addr_type);
-
-		BT_DBG("dest addr %pMR type %d IP %pI6c", &addr,
-		       addr_type, &ipv6_daddr);
+		BT_DBG("dest IP %pI6c", &ipv6_daddr);
 
-		peer = peer_lookup_ba(dev, &addr, addr_type);
-		if (!peer) {
 		/* The packet might be sent to 6lowpan interface
 		 * because of routing (either via default route
 		 * or user set route) so get peer according to
@@ -469,14 +422,13 @@ static int setup_header(struct sk_buff *skb, struct net_device *netdev,
 		 */
 		peer = peer_lookup_dst(dev, &ipv6_daddr, skb);
 		if (!peer) {
-				BT_DBG("no such peer %pMR found", &addr);
+			BT_DBG("no such peer");
 			return -ENOENT;
 		}
-		}
 
-		daddr = peer->eui64_addr;
-		*peer_addr = addr;
-		*peer_addr_type = addr_type;
+		daddr = peer->lladdr;
+		*peer_addr = peer->chan->dst;
+		*peer_addr_type = peer->chan->dst_type;
 		lowpan_cb(skb)->chan = peer->chan;
 
 		status = 1;
@@ -527,15 +479,8 @@ static int send_pkt(struct l2cap_chan *chan, struct sk_buff *skb,
 		return 0;
 	}
 
-	if (!err)
-		err = lowpan_cb(skb)->status;
-
-	if (err < 0) {
-		if (err == -EAGAIN)
-			netdev->stats.tx_dropped++;
-		else
+	if (err < 0)
 		netdev->stats.tx_errors++;
-	}
 
 	return err;
 }
@@ -647,9 +592,9 @@ static void netdev_setup(struct net_device *dev)
 {
 	dev->hard_header_len	= 0;
 	dev->needed_tailroom	= 0;
-	dev->flags		= IFF_RUNNING | IFF_POINTOPOINT |
-				  IFF_MULTICAST;
+	dev->flags		= IFF_RUNNING | IFF_MULTICAST;
 	dev->watchdog_timeo	= 0;
+	dev->tx_queue_len	= DEFAULT_TX_QUEUE_LEN;
 
 	dev->netdev_ops		= &netdev_ops;
 	dev->header_ops		= &header_ops;
@@ -660,34 +605,6 @@ static struct device_type bt_type = {
 	.name	= "bluetooth",
 };
 
-static void set_addr(u8 *eui, u8 *addr, u8 addr_type)
-{
-	/* addr is the BT address in little-endian format */
-	eui[0] = addr[5];
-	eui[1] = addr[4];
-	eui[2] = addr[3];
-	eui[3] = 0xFF;
-	eui[4] = 0xFE;
-	eui[5] = addr[2];
-	eui[6] = addr[1];
-	eui[7] = addr[0];
-
-	/* Universal/local bit set, BT 6lowpan draft ch. 3.2.1 */
-	if (addr_type == BDADDR_LE_PUBLIC)
-		eui[0] &= ~0x02;
-	else
-		eui[0] |= 0x02;
-
-	BT_DBG("type %d addr %*phC", addr_type, 8, eui);
-}
-
-static void set_dev_addr(struct net_device *netdev, bdaddr_t *addr,
-		         u8 addr_type)
-{
-	netdev->addr_assign_type = NET_ADDR_PERM;
-	set_addr(netdev->dev_addr, addr->b, addr_type);
-}
-
 static void ifup(struct net_device *netdev)
 {
 	int err;
@@ -746,16 +663,9 @@ static struct l2cap_chan *chan_create(void)
 	return chan;
 }
 
-static void set_ip_addr_bits(u8 addr_type, u8 *addr)
-{
-	if (addr_type == BDADDR_LE_PUBLIC)
-		*addr |= 0x02;
-	else
-		*addr &= ~0x02;
-}
-
 static struct l2cap_chan *add_peer_chan(struct l2cap_chan *chan,
-					struct lowpan_btle_dev *dev)
+					struct lowpan_btle_dev *dev,
+					bool new_netdev)
 {
 	struct lowpan_peer *peer;
 
@@ -766,19 +676,9 @@ static struct l2cap_chan *add_peer_chan(struct l2cap_chan *chan,
 	peer->chan = chan;
 	memset(&peer->peer_addr, 0, sizeof(struct in6_addr));
 
-	/* RFC 2464 ch. 5 */
-	peer->peer_addr.s6_addr[0] = 0xFE;
-	peer->peer_addr.s6_addr[1] = 0x80;
-	set_addr((u8 *)&peer->peer_addr.s6_addr + 8, chan->dst.b,
-		 chan->dst_type);
+	baswap((void *)peer->lladdr, &chan->dst);
 
-	memcpy(&peer->eui64_addr, (u8 *)&peer->peer_addr.s6_addr + 8,
-	       EUI64_ADDR_LEN);
-
-	/* IPv6 address needs to have the U/L bit set properly so toggle
-	 * it back here.
-	 */
-	set_ip_addr_bits(chan->dst_type, (u8 *)&peer->peer_addr.s6_addr + 8);
+	lowpan_iphc_uncompress_eui48_lladdr(&peer->peer_addr, peer->lladdr);
 
 	spin_lock(&devices_lock);
 	INIT_LIST_HEAD(&peer->list);
@@ -786,6 +686,7 @@ static struct l2cap_chan *add_peer_chan(struct l2cap_chan *chan,
 	spin_unlock(&devices_lock);
 
 	/* Notifying peers about us needs to be done without locks held */
+	if (new_netdev)
 		INIT_DELAYED_WORK(&dev->notify_peers, do_notify_peers);
 	schedule_delayed_work(&dev->notify_peers, msecs_to_jiffies(100));
 
@@ -803,7 +704,8 @@ static int setup_netdev(struct l2cap_chan *chan, struct lowpan_btle_dev **dev)
 	if (!netdev)
 		return -ENOMEM;
 
-	set_dev_addr(netdev, &chan->src, chan->src_type);
+	netdev->addr_assign_type = NET_ADDR_PERM;
+	baswap((void *)netdev->dev_addr, &chan->src);
 
 	netdev->netdev_ops = &netdev_ops;
 	SET_NETDEV_DEV(netdev, &chan->conn->hcon->hdev->dev);
@@ -843,6 +745,7 @@ static int setup_netdev(struct l2cap_chan *chan, struct lowpan_btle_dev **dev)
 static inline void chan_ready_cb(struct l2cap_chan *chan)
 {
 	struct lowpan_btle_dev *dev;
+	bool new_netdev = false;
 
 	dev = lookup_dev(chan->conn);
 
@@ -853,12 +756,13 @@ static inline void chan_ready_cb(struct l2cap_chan *chan)
 			l2cap_chan_del(chan, -ENOENT);
 			return;
 		}
+		new_netdev = true;
 	}
 
 	if (!try_module_get(THIS_MODULE))
 		return;
 
-	add_peer_chan(chan, dev);
+	add_peer_chan(chan, dev, new_netdev);
 	ifup(dev->netdev);
 }
 
@@ -964,26 +868,28 @@ static struct sk_buff *chan_alloc_skb_cb(struct l2cap_chan *chan,
 
 static void chan_suspend_cb(struct l2cap_chan *chan)
 {
-	struct sk_buff *skb = chan->data;
+	struct lowpan_btle_dev *dev;
 
-	BT_DBG("chan %p conn %p skb %p", chan, chan->conn, skb);
+	BT_DBG("chan %p suspend", chan);
 
-	if (!skb)
+	dev = lookup_dev(chan->conn);
+	if (!dev || !dev->netdev)
 		return;
 
-	lowpan_cb(skb)->status = -EAGAIN;
+	netif_stop_queue(dev->netdev);
 }
 
 static void chan_resume_cb(struct l2cap_chan *chan)
 {
-	struct sk_buff *skb = chan->data;
+	struct lowpan_btle_dev *dev;
 
-	BT_DBG("chan %p conn %p skb %p", chan, chan->conn, skb);
+	BT_DBG("chan %p resume", chan);
 
-	if (!skb)
+	dev = lookup_dev(chan->conn);
+	if (!dev || !dev->netdev)
 		return;
 
-	lowpan_cb(skb)->status = 0;
+	netif_wake_queue(dev->netdev);
 }
 
 static long chan_get_sndtimeo_cb(struct l2cap_chan *chan)

net/bluetooth/af_bluetooth.c

@@ -159,12 +159,17 @@ void bt_accept_enqueue(struct sock *parent, struct sock *sk)
 	BT_DBG("parent %p, sk %p", parent, sk);
 
 	sock_hold(sk);
+	lock_sock(sk);
 	list_add_tail(&bt_sk(sk)->accept_q, &bt_sk(parent)->accept_q);
 	bt_sk(sk)->parent = parent;
+	release_sock(sk);
 	parent->sk_ack_backlog++;
 }
 EXPORT_SYMBOL(bt_accept_enqueue);
 
+/* Calling function must hold the sk lock.
+ * bt_sk(sk)->parent must be non-NULL meaning sk is in the parent list.
+ */
 void bt_accept_unlink(struct sock *sk)
 {
 	BT_DBG("sk %p state %d", sk, sk->sk_state);
@@ -183,11 +188,32 @@ struct sock *bt_accept_dequeue(struct sock *parent, struct socket *newsock)
 
 	BT_DBG("parent %p", parent);
 
+restart:
 	list_for_each_entry_safe(s, n, &bt_sk(parent)->accept_q, accept_q) {
 		sk = (struct sock *)s;
 
+		/* Prevent early freeing of sk due to unlink and sock_kill */
+		sock_hold(sk);
 		lock_sock(sk);
 
+		/* Check sk has not already been unlinked via
+		 * bt_accept_unlink() due to serialisation caused by sk locking
+		 */
+		if (!bt_sk(sk)->parent) {
+			BT_DBG("sk %p, already unlinked", sk);
+			release_sock(sk);
+			sock_put(sk);
+
+			/* Restart the loop as sk is no longer in the list
+			 * and also avoid a potential infinite loop because
+			 * list_for_each_entry_safe() is not thread safe.
+			 */
+			goto restart;
+		}
+
+		/* sk is safely in the parent list so reduce reference count */
+		sock_put(sk);
+
 		/* FIXME: Is this check still needed */
 		if (sk->sk_state == BT_CLOSED) {
 			bt_accept_unlink(sk);

net/bluetooth/amp.c

@@ -263,7 +263,7 @@ void amp_read_loc_assoc_frag(struct hci_dev *hdev, u8 phy_handle)
 	struct hci_cp_read_local_amp_assoc cp;
 	struct amp_assoc *loc_assoc = &hdev->loc_assoc;
 	struct hci_request req;
-	int err = 0;
+	int err;
 
 	BT_DBG("%s handle %d", hdev->name, phy_handle);
 
@@ -282,7 +282,7 @@ void amp_read_loc_assoc(struct hci_dev *hdev, struct amp_mgr *mgr)
 {
 	struct hci_cp_read_local_amp_assoc cp;
 	struct hci_request req;
-	int err = 0;
+	int err;
 
 	memset(&hdev->loc_assoc, 0, sizeof(struct amp_assoc));
 	memset(&cp, 0, sizeof(cp));
@@ -292,7 +292,7 @@ void amp_read_loc_assoc(struct hci_dev *hdev, struct amp_mgr *mgr)
 	set_bit(READ_LOC_AMP_ASSOC, &mgr->state);
 	hci_req_init(&req, hdev);
 	hci_req_add(&req, HCI_OP_READ_LOCAL_AMP_ASSOC, sizeof(cp), &cp);
-	hci_req_run_skb(&req, read_local_amp_assoc_complete);
+	err = hci_req_run_skb(&req, read_local_amp_assoc_complete);
 	if (err < 0)
 		a2mp_send_getampassoc_rsp(hdev, A2MP_STATUS_INVALID_CTRL_ID);
 }
@@ -303,7 +303,7 @@ void amp_read_loc_assoc_final_data(struct hci_dev *hdev,
 	struct hci_cp_read_local_amp_assoc cp;
 	struct amp_mgr *mgr = hcon->amp_mgr;
 	struct hci_request req;
-	int err = 0;
+	int err;
 
 	cp.phy_handle = hcon->handle;
 	cp.len_so_far = cpu_to_le16(0);
@@ -314,7 +314,7 @@ void amp_read_loc_assoc_final_data(struct hci_dev *hdev,
 	/* Read Local AMP Assoc final link information data */
 	hci_req_init(&req, hdev);
 	hci_req_add(&req, HCI_OP_READ_LOCAL_AMP_ASSOC, sizeof(cp), &cp);
-	hci_req_run_skb(&req, read_local_amp_assoc_complete);
+	err = hci_req_run_skb(&req, read_local_amp_assoc_complete);
 	if (err < 0)
 		a2mp_send_getampassoc_rsp(hdev, A2MP_STATUS_INVALID_CTRL_ID);
 }

net/bluetooth/hci_core.c

@@ -2950,8 +2950,8 @@ struct hci_dev *hci_alloc_dev(void)
 	hdev->le_adv_max_interval = 0x0800;
 	hdev->le_scan_interval = 0x0060;
 	hdev->le_scan_window = 0x0030;
-	hdev->le_conn_min_interval = 0x0028;
-	hdev->le_conn_max_interval = 0x0038;
+	hdev->le_conn_min_interval = 0x0018;
+	hdev->le_conn_max_interval = 0x0028;
 	hdev->le_conn_latency = 0x0000;
 	hdev->le_supv_timeout = 0x002a;
 	hdev->le_def_tx_len = 0x001b;

net/bluetooth/l2cap_core.c

@@ -2425,6 +2425,22 @@ static int l2cap_segment_le_sdu(struct l2cap_chan *chan,
 	return 0;
 }
 
+static void l2cap_le_flowctl_send(struct l2cap_chan *chan)
+{
+	int sent = 0;
+
+	BT_DBG("chan %p", chan);
+
+	while (chan->tx_credits && !skb_queue_empty(&chan->tx_q)) {
+		l2cap_do_send(chan, skb_dequeue(&chan->tx_q));
+		chan->tx_credits--;
+		sent++;
+	}
+
+	BT_DBG("Sent %d credits %u queued %u", sent, chan->tx_credits,
+	       skb_queue_len(&chan->tx_q));
+}
+
 int l2cap_chan_send(struct l2cap_chan *chan, struct msghdr *msg, size_t len)
 {
 	struct sk_buff *skb;
@@ -2458,9 +2474,6 @@ int l2cap_chan_send(struct l2cap_chan *chan, struct msghdr *msg, size_t len)
 		if (len > chan->omtu)
 			return -EMSGSIZE;
 
-		if (!chan->tx_credits)
-			return -EAGAIN;
-
 		__skb_queue_head_init(&seg_queue);
 
 		err = l2cap_segment_le_sdu(chan, &seg_queue, msg, len);
@@ -2475,10 +2488,7 @@ int l2cap_chan_send(struct l2cap_chan *chan, struct msghdr *msg, size_t len)
 
 		skb_queue_splice_tail_init(&seg_queue, &chan->tx_q);
 
-		while (chan->tx_credits && !skb_queue_empty(&chan->tx_q)) {
-			l2cap_do_send(chan, skb_dequeue(&chan->tx_q));
-			chan->tx_credits--;
-		}
+		l2cap_le_flowctl_send(chan);
 
 		if (!chan->tx_credits)
 			chan->ops->suspend(chan);
@@ -5570,10 +5580,8 @@ static inline int l2cap_le_credits(struct l2cap_conn *conn,
 
 	chan->tx_credits += credits;
 
-	while (chan->tx_credits && !skb_queue_empty(&chan->tx_q)) {
-		l2cap_do_send(chan, skb_dequeue(&chan->tx_q));
-		chan->tx_credits--;
-	}
+	/* Resume sending */
+	l2cap_le_flowctl_send(chan);
 
 	if (chan->tx_credits)
 		chan->ops->resume(chan);

net/bluetooth/rfcomm/core.c

@@ -311,7 +311,7 @@ struct rfcomm_dlc *rfcomm_dlc_alloc(gfp_t prio)
 
 	skb_queue_head_init(&d->tx_queue);
 	mutex_init(&d->lock);
-	atomic_set(&d->refcnt, 1);
+	refcount_set(&d->refcnt, 1);
 
 	rfcomm_dlc_clear_state(d);
 
@@ -342,7 +342,7 @@ static void rfcomm_dlc_unlink(struct rfcomm_dlc *d)
 {
 	struct rfcomm_session *s = d->session;
 
-	BT_DBG("dlc %p refcnt %d session %p", d, atomic_read(&d->refcnt), s);
+	BT_DBG("dlc %p refcnt %d session %p", d, refcount_read(&d->refcnt), s);
 
 	list_del(&d->list);
 	d->session = NULL;

net/ipv6/addrconf.c

@@ -2073,12 +2073,23 @@ static void addrconf_leave_anycast(struct inet6_ifaddr *ifp)
 	__ipv6_dev_ac_dec(ifp->idev, &addr);
 }
 
-static int addrconf_ifid_eui64(u8 *eui, struct net_device *dev)
+static int addrconf_ifid_6lowpan(u8 *eui, struct net_device *dev)
 {
-	if (dev->addr_len != EUI64_ADDR_LEN)
-		return -1;
+	switch (dev->addr_len) {
+	case ETH_ALEN:
+		memcpy(eui, dev->dev_addr, 3);
+		eui[3] = 0xFF;
+		eui[4] = 0xFE;
+		memcpy(eui + 5, dev->dev_addr + 3, 3);
+		break;
+	case EUI64_ADDR_LEN:
 		memcpy(eui, dev->dev_addr, EUI64_ADDR_LEN);
 		eui[0] ^= 2;
+		break;
+	default:
+		return -1;
+	}
+
 	return 0;
 }
 
@@ -2170,7 +2181,7 @@ static int ipv6_generate_eui64(u8 *eui, struct net_device *dev)
 	case ARPHRD_TUNNEL:
 		return addrconf_ifid_gre(eui, dev);
 	case ARPHRD_6LOWPAN:
-		return addrconf_ifid_eui64(eui, dev);
+		return addrconf_ifid_6lowpan(eui, dev);
 	case ARPHRD_IEEE1394:
 		return addrconf_ifid_ieee1394(eui, dev);
 	case ARPHRD_TUNNEL6: