Commit 450e7fe9 authored by Fabio Estevam's avatar Fabio Estevam Committed by Shawn Guo

ARM: dts: imx6qdl-pico: Fix Ethernet support

Currently, it is no longer possible to retrieve a DHCP address
on the imx6qdl-pico board.

This issue has been exposed by commit f5d9aa79 ("ARM: imx6q:
remove clk-out fixup for the Atheros AR8031 and AR8035 PHYs").

Fix it by describing the qca,clk-out-frequency property as suggested
by the commit above.

Fixes: 98670a0b ("ARM: dts: imx6qdl: Add imx6qdl-pico support")
Signed-off-by: default avatarFabio Estevam <festevam@gmail.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 5c187e2e
...@@ -176,7 +176,18 @@ &fec { ...@@ -176,7 +176,18 @@ &fec {
pinctrl-0 = <&pinctrl_enet>; pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id"; phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; phy-reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
phy-handle = <&phy>;
status = "okay"; status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy: ethernet-phy@1 {
reg = <1>;
qca,clk-out-frequency = <125000000>;
};
};
}; };
&hdmi { &hdmi {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment