Merge branch 'acpi-dev-pm' into acpi-enumeration

Subsequent commits in this branch will depend on 'acpi-dev-pm'
material.

Documentation/ABI/testing/sysfs-devices-power

@@ -204,3 +204,34 @@ Description:
 
 		This attribute has no effect on system-wide suspend/resume and
 		hibernation.
+
+What:		/sys/devices/.../power/pm_qos_no_power_off
+Date:		September 2012
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../power/pm_qos_no_power_off attribute
+		is used for manipulating the PM QoS "no power off" flag.  If
+		set, this flag indicates to the kernel that power should not
+		be removed entirely from the device.
+
+		Not all drivers support this attribute.  If it isn't supported,
+		it is not present.
+
+		This attribute has no effect on system-wide suspend/resume and
+		hibernation.
+
+What:		/sys/devices/.../power/pm_qos_remote_wakeup
+Date:		September 2012
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../power/pm_qos_remote_wakeup attribute
+		is used for manipulating the PM QoS "remote wakeup required"
+		flag.  If set, this flag indicates to the kernel that the
+		device is a source of user events that have to be signaled from
+		its low-power states.
+
+		Not all drivers support this attribute.  If it isn't supported,
+		it is not present.
+
+		This attribute has no effect on system-wide suspend/resume and
+		hibernation.

Documentation/power/pm_qos_interface.txt

@@ -99,7 +99,7 @@ reading the aggregated value does not require any locking mechanism.
 
 From kernel mode the use of this interface is the following:
 
-int dev_pm_qos_add_request(device, handle, value):
+int dev_pm_qos_add_request(device, handle, type, value):
 Will insert an element into the list for that identified device with the
 target value.  Upon change to this list the new target is recomputed and any
 registered notifiers are called only if the target value is now different.

drivers/acpi/Makefile

@@ -21,9 +21,10 @@ obj-y				+= acpi.o \
 acpi-y				+= osl.o utils.o reboot.o
 acpi-y				+= nvs.o
 
-# sleep related files
+# Power management related files
 acpi-y				+= wakeup.o
 acpi-y				+= sleep.o
+acpi-$(CONFIG_PM)		+= device_pm.o
 acpi-$(CONFIG_ACPI_SLEEP)	+= proc.o
 
 

drivers/acpi/bus.c

@@ -257,7 +257,15 @@ static int __acpi_bus_get_power(struct acpi_device *device, int *state)
 }
 
 
-static int __acpi_bus_set_power(struct acpi_device *device, int state)
+/**
+ * acpi_device_set_power - Set power state of an ACPI device.
+ * @device: Device to set the power state of.
+ * @state: New power state to set.
+ *
+ * Callers must ensure that the device is power manageable before using this
+ * function.
+ */
+int acpi_device_set_power(struct acpi_device *device, int state)
 {
 	int result = 0;
 	acpi_status status = AE_OK;
@@ -298,6 +306,12 @@ static int __acpi_bus_set_power(struct acpi_device *device, int state)
 	 * a lower-powered state.
 	 */
 	if (state < device->power.state) {
+		if (device->power.state >= ACPI_STATE_D3_HOT &&
+		    state != ACPI_STATE_D0) {
+			printk(KERN_WARNING PREFIX
+			      "Cannot transition to non-D0 state from D3\n");
+			return -ENODEV;
+		}
 		if (device->power.flags.power_resources) {
 			result = acpi_power_transition(device, state);
 			if (result)
@@ -341,6 +355,7 @@ static int __acpi_bus_set_power(struct acpi_device *device, int state)
 
 	return result;
 }
+EXPORT_SYMBOL(acpi_device_set_power);
 
 
 int acpi_bus_set_power(acpi_handle handle, int state)
@@ -359,7 +374,7 @@ int acpi_bus_set_power(acpi_handle handle, int state)
 		return -ENODEV;
 	}
 
-	return __acpi_bus_set_power(device, state);
+	return acpi_device_set_power(device, state);
 }
 EXPORT_SYMBOL(acpi_bus_set_power);
 
@@ -402,7 +417,7 @@ int acpi_bus_update_power(acpi_handle handle, int *state_p)
 	if (result)
 		return result;
 
-	result = __acpi_bus_set_power(device, state);
+	result = acpi_device_set_power(device, state);
 	if (!result && state_p)
 		*state_p = state;
 

drivers/acpi/device_pm.c

+/*
+ * drivers/acpi/device_pm.c - ACPI device power management routines.
+ *
+ * Copyright (C) 2012, Intel Corp.
+ * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/mutex.h>
+#include <linux/pm_qos.h>
+#include <linux/pm_runtime.h>
+
+#include <acpi/acpi.h>
+#include <acpi/acpi_bus.h>
+
+static DEFINE_MUTEX(acpi_pm_notifier_lock);
+
+/**
+ * acpi_add_pm_notifier - Register PM notifier for given ACPI device.
+ * @adev: ACPI device to add the notifier for.
+ * @context: Context information to pass to the notifier routine.
+ *
+ * NOTE: @adev need not be a run-wake or wakeup device to be a valid source of
+ * PM wakeup events.  For example, wakeup events may be generated for bridges
+ * if one of the devices below the bridge is signaling wakeup, even if the
+ * bridge itself doesn't have a wakeup GPE associated with it.
+ */
+acpi_status acpi_add_pm_notifier(struct acpi_device *adev,
+				 acpi_notify_handler handler, void *context)
+{
+	acpi_status status = AE_ALREADY_EXISTS;
+
+	mutex_lock(&acpi_pm_notifier_lock);
+
+	if (adev->wakeup.flags.notifier_present)
+		goto out;
+
+	status = acpi_install_notify_handler(adev->handle,
+					     ACPI_SYSTEM_NOTIFY,
+					     handler, context);
+	if (ACPI_FAILURE(status))
+		goto out;
+
+	adev->wakeup.flags.notifier_present = true;
+
+ out:
+	mutex_unlock(&acpi_pm_notifier_lock);
+	return status;
+}
+
+/**
+ * acpi_remove_pm_notifier - Unregister PM notifier from given ACPI device.
+ * @adev: ACPI device to remove the notifier from.
+ */
+acpi_status acpi_remove_pm_notifier(struct acpi_device *adev,
+				    acpi_notify_handler handler)
+{
+	acpi_status status = AE_BAD_PARAMETER;
+
+	mutex_lock(&acpi_pm_notifier_lock);
+
+	if (!adev->wakeup.flags.notifier_present)
+		goto out;
+
+	status = acpi_remove_notify_handler(adev->handle,
+					    ACPI_SYSTEM_NOTIFY,
+					    handler);
+	if (ACPI_FAILURE(status))
+		goto out;
+
+	adev->wakeup.flags.notifier_present = false;
+
+ out:
+	mutex_unlock(&acpi_pm_notifier_lock);
+	return status;
+}
+
+/**
+ * acpi_device_power_state - Get preferred power state of ACPI device.
+ * @dev: Device whose preferred target power state to return.
+ * @adev: ACPI device node corresponding to @dev.
+ * @target_state: System state to match the resultant device state.
+ * @d_max_in: Deepest low-power state to take into consideration.
+ * @d_min_p: Location to store the upper limit of the allowed states range.
+ * Return value: Preferred power state of the device on success, -ENODEV
+ * (if there's no 'struct acpi_device' for @dev) or -EINVAL on failure
+ *
+ * Find the lowest power (highest number) ACPI device power state that the
+ * device can be in while the system is in the state represented by
+ * @target_state.  If @d_min_p is set, the highest power (lowest number) device
+ * power state that @dev can be in for the given system sleep state is stored
+ * at the location pointed to by it.
+ *
+ * Callers must ensure that @dev and @adev are valid pointers and that @adev
+ * actually corresponds to @dev before using this function.
+ */
+int acpi_device_power_state(struct device *dev, struct acpi_device *adev,
+			    u32 target_state, int d_max_in, int *d_min_p)
+{
+	char acpi_method[] = "_SxD";
+	unsigned long long d_min, d_max;
+	bool wakeup = false;
+
+	if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3)
+		return -EINVAL;
+
+	if (d_max_in > ACPI_STATE_D3_HOT) {
+		enum pm_qos_flags_status stat;
+
+		stat = dev_pm_qos_flags(dev, PM_QOS_FLAG_NO_POWER_OFF);
+		if (stat == PM_QOS_FLAGS_ALL)
+			d_max_in = ACPI_STATE_D3_HOT;
+	}
+
+	acpi_method[2] = '0' + target_state;
+	/*
+	 * If the sleep state is S0, the lowest limit from ACPI is D3,
+	 * but if the device has _S0W, we will use the value from _S0W
+	 * as the lowest limit from ACPI.  Finally, we will constrain
+	 * the lowest limit with the specified one.
+	 */
+	d_min = ACPI_STATE_D0;
+	d_max = ACPI_STATE_D3;
+
+	/*
+	 * If present, _SxD methods return the minimum D-state (highest power
+	 * state) we can use for the corresponding S-states.  Otherwise, the
+	 * minimum D-state is D0 (ACPI 3.x).
+	 *
+	 * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer
+	 * provided -- that's our fault recovery, we ignore retval.
+	 */
+	if (target_state > ACPI_STATE_S0) {
+		acpi_evaluate_integer(adev->handle, acpi_method, NULL, &d_min);
+		wakeup = device_may_wakeup(dev) && adev->wakeup.flags.valid
+			&& adev->wakeup.sleep_state >= target_state;
+	} else if (dev_pm_qos_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP) !=
+			PM_QOS_FLAGS_NONE) {
+		wakeup = adev->wakeup.flags.valid;
+	}
+
+	/*
+	 * If _PRW says we can wake up the system from the target sleep state,
+	 * the D-state returned by _SxD is sufficient for that (we assume a
+	 * wakeup-aware driver if wake is set).  Still, if _SxW exists
+	 * (ACPI 3.x), it should return the maximum (lowest power) D-state that
+	 * can wake the system.  _S0W may be valid, too.
+	 */
+	if (wakeup) {
+		acpi_status status;
+
+		acpi_method[3] = 'W';
+		status = acpi_evaluate_integer(adev->handle, acpi_method, NULL,
+						&d_max);
+		if (ACPI_FAILURE(status)) {
+			if (target_state != ACPI_STATE_S0 ||
+			    status != AE_NOT_FOUND)
+				d_max = d_min;
+		} else if (d_max < d_min) {
+			/* Warn the user of the broken DSDT */
+			printk(KERN_WARNING "ACPI: Wrong value from %s\n",
+				acpi_method);
+			/* Sanitize it */
+			d_min = d_max;
+		}
+	}
+
+	if (d_max_in < d_min)
+		return -EINVAL;
+	if (d_min_p)
+		*d_min_p = d_min;
+	/* constrain d_max with specified lowest limit (max number) */
+	if (d_max > d_max_in) {
+		for (d_max = d_max_in; d_max > d_min; d_max--) {
+			if (adev->power.states[d_max].flags.valid)
+				break;
+		}
+	}
+	return d_max;
+}
+EXPORT_SYMBOL_GPL(acpi_device_power_state);
+
+/**
+ * acpi_pm_device_sleep_state - Get preferred power state of ACPI device.
+ * @dev: Device whose preferred target power state to return.
+ * @d_min_p: Location to store the upper limit of the allowed states range.
+ * @d_max_in: Deepest low-power state to take into consideration.
+ * Return value: Preferred power state of the device on success, -ENODEV
+ * (if there's no 'struct acpi_device' for @dev) or -EINVAL on failure
+ *
+ * The caller must ensure that @dev is valid before using this function.
+ */
+int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in)
+{
+	acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
+	struct acpi_device *adev;
+
+	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+		dev_dbg(dev, "ACPI handle without context in %s!\n", __func__);
+		return -ENODEV;
+	}
+
+	return acpi_device_power_state(dev, adev, acpi_target_system_state(),
+				       d_max_in, d_min_p);
+}
+EXPORT_SYMBOL(acpi_pm_device_sleep_state);
+
+#ifdef CONFIG_PM_RUNTIME
+/**
+ * acpi_wakeup_device - Wakeup notification handler for ACPI devices.
+ * @handle: ACPI handle of the device the notification is for.
+ * @event: Type of the signaled event.
+ * @context: Device corresponding to @handle.
+ */
+static void acpi_wakeup_device(acpi_handle handle, u32 event, void *context)
+{
+	struct device *dev = context;
+
+	if (event == ACPI_NOTIFY_DEVICE_WAKE && dev) {
+		pm_wakeup_event(dev, 0);
+		pm_runtime_resume(dev);
+	}
+}
+
+/**
+ * __acpi_device_run_wake - Enable/disable runtime remote wakeup for device.
+ * @adev: ACPI device to enable/disable the remote wakeup for.
+ * @enable: Whether to enable or disable the wakeup functionality.
+ *
+ * Enable/disable the GPE associated with @adev so that it can generate
+ * wakeup signals for the device in response to external (remote) events and
+ * enable/disable device wakeup power.
+ *
+ * Callers must ensure that @adev is a valid ACPI device node before executing
+ * this function.
+ */
+int __acpi_device_run_wake(struct acpi_device *adev, bool enable)
+{
+	struct acpi_device_wakeup *wakeup = &adev->wakeup;
+
+	if (enable) {
+		acpi_status res;
+		int error;
+
+		error = acpi_enable_wakeup_device_power(adev, ACPI_STATE_S0);
+		if (error)
+			return error;
+
+		res = acpi_enable_gpe(wakeup->gpe_device, wakeup->gpe_number);
+		if (ACPI_FAILURE(res)) {
+			acpi_disable_wakeup_device_power(adev);
+			return -EIO;
+		}
+	} else {
+		acpi_disable_gpe(wakeup->gpe_device, wakeup->gpe_number);
+		acpi_disable_wakeup_device_power(adev);
+	}
+	return 0;
+}
+
+/**
+ * acpi_pm_device_run_wake - Enable/disable remote wakeup for given device.
+ * @dev: Device to enable/disable the platform to wake up.
+ * @enable: Whether to enable or disable the wakeup functionality.
+ */
+int acpi_pm_device_run_wake(struct device *phys_dev, bool enable)
+{
+	struct acpi_device *adev;
+	acpi_handle handle;
+
+	if (!device_run_wake(phys_dev))
+		return -EINVAL;
+
+	handle = DEVICE_ACPI_HANDLE(phys_dev);
+	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+		dev_dbg(phys_dev, "ACPI handle without context in %s!\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	return __acpi_device_run_wake(adev, enable);
+}
+EXPORT_SYMBOL(acpi_pm_device_run_wake);
+#else
+static inline void acpi_wakeup_device(acpi_handle handle, u32 event,
+				      void *context) {}
+#endif /* CONFIG_PM_RUNTIME */
+
+ #ifdef CONFIG_PM_SLEEP
+/**
+ * __acpi_device_sleep_wake - Enable or disable device to wake up the system.
+ * @dev: Device to enable/desible to wake up the system.
+ * @target_state: System state the device is supposed to wake up from.
+ * @enable: Whether to enable or disable @dev to wake up the system.
+ */
+int __acpi_device_sleep_wake(struct acpi_device *adev, u32 target_state,
+			     bool enable)
+{
+	return enable ?
+		acpi_enable_wakeup_device_power(adev, target_state) :
+		acpi_disable_wakeup_device_power(adev);
+}
+
+/**
+ * acpi_pm_device_sleep_wake - Enable or disable device to wake up the system.
+ * @dev: Device to enable/desible to wake up the system from sleep states.
+ * @enable: Whether to enable or disable @dev to wake up the system.
+ */
+int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
+{
+	acpi_handle handle;
+	struct acpi_device *adev;
+	int error;
+
+	if (!device_can_wakeup(dev))
+		return -EINVAL;
+
+	handle = DEVICE_ACPI_HANDLE(dev);
+	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+		dev_dbg(dev, "ACPI handle without context in %s!\n", __func__);
+		return -ENODEV;
+	}
+
+	error = __acpi_device_sleep_wake(adev, acpi_target_system_state(),
+					 enable);
+	if (!error)
+		dev_info(dev, "System wakeup %s by ACPI\n",
+				enable ? "enabled" : "disabled");
+
+	return error;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+/**
+ * acpi_dev_pm_get_node - Get ACPI device node for the given physical device.
+ * @dev: Device to get the ACPI node for.
+ */
+static struct acpi_device *acpi_dev_pm_get_node(struct device *dev)
+{
+	acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
+	struct acpi_device *adev;
+
+	return handle && ACPI_SUCCESS(acpi_bus_get_device(handle, &adev)) ?
+		adev : NULL;
+}
+
+/**
+ * acpi_dev_pm_low_power - Put ACPI device into a low-power state.
+ * @dev: Device to put into a low-power state.
+ * @adev: ACPI device node corresponding to @dev.
+ * @system_state: System state to choose the device state for.
+ */
+static int acpi_dev_pm_low_power(struct device *dev, struct acpi_device *adev,
+				 u32 system_state)
+{
+	int power_state;
+
+	if (!acpi_device_power_manageable(adev))
+		return 0;
+
+	power_state = acpi_device_power_state(dev, adev, system_state,
+					      ACPI_STATE_D3, NULL);
+	if (power_state < ACPI_STATE_D0 || power_state > ACPI_STATE_D3)
+		return -EIO;
+
+	return acpi_device_set_power(adev, power_state);
+}
+
+/**
+ * acpi_dev_pm_full_power - Put ACPI device into the full-power state.
+ * @adev: ACPI device node to put into the full-power state.
+ */
+static int acpi_dev_pm_full_power(struct acpi_device *adev)
+{
+	return acpi_device_power_manageable(adev) ?
+		acpi_device_set_power(adev, ACPI_STATE_D0) : 0;
+}
+
+#ifdef CONFIG_PM_RUNTIME
+/**
+ * acpi_dev_runtime_suspend - Put device into a low-power state using ACPI.
+ * @dev: Device to put into a low-power state.
+ *
+ * Put the given device into a runtime low-power state using the standard ACPI
+ * mechanism.  Set up remote wakeup if desired, choose the state to put the
+ * device into (this checks if remote wakeup is expected to work too), and set
+ * the power state of the device.
+ */
+int acpi_dev_runtime_suspend(struct device *dev)
+{
+	struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+	bool remote_wakeup;
+	int error;
+
+	if (!adev)
+		return 0;
+
+	remote_wakeup = dev_pm_qos_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP) >
+				PM_QOS_FLAGS_NONE;
+	error = __acpi_device_run_wake(adev, remote_wakeup);
+	if (remote_wakeup && error)
+		return -EAGAIN;
+
+	error = acpi_dev_pm_low_power(dev, adev, ACPI_STATE_S0);
+	if (error)
+		__acpi_device_run_wake(adev, false);
+
+	return error;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_runtime_suspend);
+
+/**
+ * acpi_dev_runtime_resume - Put device into the full-power state using ACPI.
+ * @dev: Device to put into the full-power state.
+ *
+ * Put the given device into the full-power state using the standard ACPI
+ * mechanism at run time.  Set the power state of the device to ACPI D0 and
+ * disable remote wakeup.
+ */
+int acpi_dev_runtime_resume(struct device *dev)
+{
+	struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+	int error;
+
+	if (!adev)
+		return 0;
+
+	error = acpi_dev_pm_full_power(adev);
+	__acpi_device_run_wake(adev, false);
+	return error;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_runtime_resume);
+
+/**
+ * acpi_subsys_runtime_suspend - Suspend device using ACPI.
+ * @dev: Device to suspend.
+ *
+ * Carry out the generic runtime suspend procedure for @dev and use ACPI to put
+ * it into a runtime low-power state.
+ */
+int acpi_subsys_runtime_suspend(struct device *dev)
+{
+	int ret = pm_generic_runtime_suspend(dev);
+	return ret ? ret : acpi_dev_runtime_suspend(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_runtime_suspend);
+
+/**
+ * acpi_subsys_runtime_resume - Resume device using ACPI.
+ * @dev: Device to Resume.
+ *
+ * Use ACPI to put the given device into the full-power state and carry out the
+ * generic runtime resume procedure for it.
+ */
+int acpi_subsys_runtime_resume(struct device *dev)
+{
+	int ret = acpi_dev_runtime_resume(dev);
+	return ret ? ret : pm_generic_runtime_resume(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_runtime_resume);
+#endif /* CONFIG_PM_RUNTIME */
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * acpi_dev_suspend_late - Put device into a low-power state using ACPI.
+ * @dev: Device to put into a low-power state.
+ *
+ * Put the given device into a low-power state during system transition to a
+ * sleep state using the standard ACPI mechanism.  Set up system wakeup if
+ * desired, choose the state to put the device into (this checks if system
+ * wakeup is expected to work too), and set the power state of the device.
+ */
+int acpi_dev_suspend_late(struct device *dev)
+{
+	struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+	u32 target_state;
+	bool wakeup;
+	int error;
+
+	if (!adev)
+		return 0;
+
+	target_state = acpi_target_system_state();
+	wakeup = device_may_wakeup(dev);
+	error = __acpi_device_sleep_wake(adev, target_state, wakeup);
+	if (wakeup && error)
+		return error;
+
+	error = acpi_dev_pm_low_power(dev, adev, target_state);
+	if (error)
+		__acpi_device_sleep_wake(adev, ACPI_STATE_UNKNOWN, false);
+
+	return error;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_suspend_late);
+
+/**
+ * acpi_dev_resume_early - Put device into the full-power state using ACPI.
+ * @dev: Device to put into the full-power state.
+ *
+ * Put the given device into the full-power state using the standard ACPI
+ * mechanism during system transition to the working state.  Set the power
+ * state of the device to ACPI D0 and disable remote wakeup.
+ */
+int acpi_dev_resume_early(struct device *dev)
+{
+	struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+	int error;
+
+	if (!adev)
+		return 0;
+
+	error = acpi_dev_pm_full_power(adev);
+	__acpi_device_sleep_wake(adev, ACPI_STATE_UNKNOWN, false);
+	return error;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_resume_early);
+
+/**
+ * acpi_subsys_prepare - Prepare device for system transition to a sleep state.
+ * @dev: Device to prepare.
+ */
+int acpi_subsys_prepare(struct device *dev)
+{
+	/*
+	 * Follow PCI and resume devices suspended at run time before running
+	 * their system suspend callbacks.
+	 */
+	pm_runtime_resume(dev);
+	return pm_generic_prepare(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_prepare);
+
+/**
+ * acpi_subsys_suspend_late - Suspend device using ACPI.
+ * @dev: Device to suspend.
+ *
+ * Carry out the generic late suspend procedure for @dev and use ACPI to put
+ * it into a low-power state during system transition into a sleep state.
+ */
+int acpi_subsys_suspend_late(struct device *dev)
+{
+	int ret = pm_generic_suspend_late(dev);
+	return ret ? ret : acpi_dev_suspend_late(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_suspend_late);
+
+/**
+ * acpi_subsys_resume_early - Resume device using ACPI.
+ * @dev: Device to Resume.
+ *
+ * Use ACPI to put the given device into the full-power state and carry out the
+ * generic early resume procedure for it during system transition into the
+ * working state.
+ */
+int acpi_subsys_resume_early(struct device *dev)
+{
+	int ret = acpi_dev_resume_early(dev);
+	return ret ? ret : pm_generic_resume_early(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_resume_early);
+#endif /* CONFIG_PM_SLEEP */
+
+static struct dev_pm_domain acpi_general_pm_domain = {
+	.ops = {
+#ifdef CONFIG_PM_RUNTIME
+		.runtime_suspend = acpi_subsys_runtime_suspend,
+		.runtime_resume = acpi_subsys_runtime_resume,
+		.runtime_idle = pm_generic_runtime_idle,
+#endif
+#ifdef CONFIG_PM_SLEEP
+		.prepare = acpi_subsys_prepare,
+		.suspend_late = acpi_subsys_suspend_late,
+		.resume_early = acpi_subsys_resume_early,
+		.poweroff_late = acpi_subsys_suspend_late,
+		.restore_early = acpi_subsys_resume_early,
+#endif
+	},
+};
+
+/**
+ * acpi_dev_pm_attach - Prepare device for ACPI power management.
+ * @dev: Device to prepare.
+ * @power_on: Whether or not to power on the device.
+ *
+ * If @dev has a valid ACPI handle that has a valid struct acpi_device object
+ * attached to it, install a wakeup notification handler for the device and
+ * add it to the general ACPI PM domain.  If @power_on is set, the device will
+ * be put into the ACPI D0 state before the function returns.
+ *
+ * This assumes that the @dev's bus type uses generic power management callbacks
+ * (or doesn't use any power management callbacks at all).
+ *
+ * Callers must ensure proper synchronization of this function with power
+ * management callbacks.
+ */
+int acpi_dev_pm_attach(struct device *dev, bool power_on)
+{
+	struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+
+	if (!adev)
+		return -ENODEV;
+
+	if (dev->pm_domain)
+		return -EEXIST;
+
+	acpi_add_pm_notifier(adev, acpi_wakeup_device, dev);
+	dev->pm_domain = &acpi_general_pm_domain;
+	if (power_on) {
+		acpi_dev_pm_full_power(adev);
+		__acpi_device_run_wake(adev, false);
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_pm_attach);
+
+/**
+ * acpi_dev_pm_detach - Remove ACPI power management from the device.
+ * @dev: Device to take care of.
+ * @power_off: Whether or not to try to remove power from the device.
+ *
+ * Remove the device from the general ACPI PM domain and remove its wakeup
+ * notifier.  If @power_off is set, additionally remove power from the device if
+ * possible.
+ *
+ * Callers must ensure proper synchronization of this function with power
+ * management callbacks.
+ */
+void acpi_dev_pm_detach(struct device *dev, bool power_off)
+{
+	struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+
+	if (adev && dev->pm_domain == &acpi_general_pm_domain) {
+		dev->pm_domain = NULL;
+		acpi_remove_pm_notifier(adev, acpi_wakeup_device);
+		if (power_off) {
+			/*
+			 * If the device's PM QoS resume latency limit or flags
+			 * have been exposed to user space, they have to be
+			 * hidden at this point, so that they don't affect the
+			 * choice of the low-power state to put the device into.
+			 */
+			dev_pm_qos_hide_latency_limit(dev);
+			dev_pm_qos_hide_flags(dev);
+			__acpi_device_run_wake(adev, false);
+			acpi_dev_pm_low_power(dev, adev, ACPI_STATE_S0);
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(acpi_dev_pm_detach);

drivers/acpi/scan.c

@@ -1006,8 +1006,10 @@ static int acpi_bus_get_power_flags(struct acpi_device *device)
 		 * D3hot is only valid if _PR3 present.
 		 */
 		if (ps->resources.count ||
-		    (ps->flags.explicit_set && i < ACPI_STATE_D3_HOT))
+		    (ps->flags.explicit_set && i < ACPI_STATE_D3_HOT)) {
 			ps->flags.valid = 1;
+			ps->flags.os_accessible = 1;
+		}
 
 		ps->power = -1;	/* Unknown - driver assigned */
 		ps->latency = -1;	/* Unknown - driver assigned */
@@ -1023,6 +1025,11 @@ static int acpi_bus_get_power_flags(struct acpi_device *device)
 	if (device->power.states[ACPI_STATE_D3_HOT].flags.explicit_set)
 		device->power.states[ACPI_STATE_D3_COLD].flags.explicit_set = 1;
 
+	/* Presence of _PS3 or _PRx means we can put the device into D3 cold */
+	if (device->power.states[ACPI_STATE_D3_HOT].flags.explicit_set ||
+			device->power.flags.power_resources)
+		device->power.states[ACPI_STATE_D3_COLD].flags.os_accessible = 1;
+
 	acpi_bus_init_power(device);
 
 	return 0;

drivers/acpi/sleep.c

@@ -18,7 +18,6 @@
 #include <linux/reboot.h>
 #include <linux/acpi.h>
 #include <linux/module.h>
-#include <linux/pm_runtime.h>
 
 #include <asm/io.h>
 
@@ -81,6 +80,12 @@ static int acpi_sleep_prepare(u32 acpi_state)
 
 #ifdef CONFIG_ACPI_SLEEP
 static u32 acpi_target_sleep_state = ACPI_STATE_S0;
+
+u32 acpi_target_system_state(void)
+{
+	return acpi_target_sleep_state;
+}
+
 static bool pwr_btn_event_pending;
 
 /*
@@ -681,177 +686,6 @@ int acpi_suspend(u32 acpi_state)
 	return -EINVAL;
 }
 
-#ifdef CONFIG_PM
-/**
- *	acpi_pm_device_sleep_state - return preferred power state of ACPI device
- *		in the system sleep state given by %acpi_target_sleep_state
- *	@dev: device to examine; its driver model wakeup flags control
- *		whether it should be able to wake up the system
- *	@d_min_p: used to store the upper limit of allowed states range
- *	@d_max_in: specify the lowest allowed states
- *	Return value: preferred power state of the device on success, -ENODEV
- *	(ie. if there's no 'struct acpi_device' for @dev) or -EINVAL on failure
- *
- *	Find the lowest power (highest number) ACPI device power state that
- *	device @dev can be in while the system is in the sleep state represented
- *	by %acpi_target_sleep_state.  If @wake is nonzero, the device should be
- *	able to wake up the system from this sleep state.  If @d_min_p is set,
- *	the highest power (lowest number) device power state of @dev allowed
- *	in this system sleep state is stored at the location pointed to by it.
- *
- *	The caller must ensure that @dev is valid before using this function.
- *	The caller is also responsible for figuring out if the device is
- *	supposed to be able to wake up the system and passing this information
- *	via @wake.
- */
-
-int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in)
-{
-	acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
-	struct acpi_device *adev;
-	char acpi_method[] = "_SxD";
-	unsigned long long d_min, d_max;
-
-	if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3)
-		return -EINVAL;
-	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
-		printk(KERN_DEBUG "ACPI handle has no context!\n");
-		return -ENODEV;
-	}
-
-	acpi_method[2] = '0' + acpi_target_sleep_state;
-	/*
-	 * If the sleep state is S0, the lowest limit from ACPI is D3,
-	 * but if the device has _S0W, we will use the value from _S0W
-	 * as the lowest limit from ACPI.  Finally, we will constrain
-	 * the lowest limit with the specified one.
-	 */
-	d_min = ACPI_STATE_D0;
-	d_max = ACPI_STATE_D3;
-
-	/*
-	 * If present, _SxD methods return the minimum D-state (highest power
-	 * state) we can use for the corresponding S-states.  Otherwise, the
-	 * minimum D-state is D0 (ACPI 3.x).
-	 *
-	 * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer
-	 * provided -- that's our fault recovery, we ignore retval.
-	 */
-	if (acpi_target_sleep_state > ACPI_STATE_S0)
-		acpi_evaluate_integer(handle, acpi_method, NULL, &d_min);
-
-	/*
-	 * If _PRW says we can wake up the system from the target sleep state,
-	 * the D-state returned by _SxD is sufficient for that (we assume a
-	 * wakeup-aware driver if wake is set).  Still, if _SxW exists
-	 * (ACPI 3.x), it should return the maximum (lowest power) D-state that
-	 * can wake the system.  _S0W may be valid, too.
-	 */
-	if (acpi_target_sleep_state == ACPI_STATE_S0 ||
-	    (device_may_wakeup(dev) && adev->wakeup.flags.valid &&
-	     adev->wakeup.sleep_state >= acpi_target_sleep_state)) {
-		acpi_status status;
-
-		acpi_method[3] = 'W';
-		status = acpi_evaluate_integer(handle, acpi_method, NULL,
-						&d_max);
-		if (ACPI_FAILURE(status)) {
-			if (acpi_target_sleep_state != ACPI_STATE_S0 ||
-			    status != AE_NOT_FOUND)
-				d_max = d_min;
-		} else if (d_max < d_min) {
-			/* Warn the user of the broken DSDT */
-			printk(KERN_WARNING "ACPI: Wrong value from %s\n",
-				acpi_method);
-			/* Sanitize it */
-			d_min = d_max;
-		}
-	}
-
-	if (d_max_in < d_min)
-		return -EINVAL;
-	if (d_min_p)
-		*d_min_p = d_min;
-	/* constrain d_max with specified lowest limit (max number) */
-	if (d_max > d_max_in) {
-		for (d_max = d_max_in; d_max > d_min; d_max--) {
-			if (adev->power.states[d_max].flags.valid)
-				break;
-		}
-	}
-	return d_max;
-}
-EXPORT_SYMBOL(acpi_pm_device_sleep_state);
-#endif /* CONFIG_PM */
-
-#ifdef CONFIG_PM_SLEEP
-/**
- * acpi_pm_device_run_wake - Enable/disable wake-up for given device.
- * @phys_dev: Device to enable/disable the platform to wake-up the system for.
- * @enable: Whether enable or disable the wake-up functionality.
- *
- * Find the ACPI device object corresponding to @pci_dev and try to
- * enable/disable the GPE associated with it.
- */
-int acpi_pm_device_run_wake(struct device *phys_dev, bool enable)
-{
-	struct acpi_device *dev;
-	acpi_handle handle;
-
-	if (!device_run_wake(phys_dev))
-		return -EINVAL;
-
-	handle = DEVICE_ACPI_HANDLE(phys_dev);
-	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &dev))) {
-		dev_dbg(phys_dev, "ACPI handle has no context in %s!\n",
-			__func__);
-		return -ENODEV;
-	}
-
-	if (enable) {
-		acpi_enable_wakeup_device_power(dev, ACPI_STATE_S0);
-		acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number);
-	} else {
-		acpi_disable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number);
-		acpi_disable_wakeup_device_power(dev);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(acpi_pm_device_run_wake);
-
-/**
- *	acpi_pm_device_sleep_wake - enable or disable the system wake-up
- *                                  capability of given device
- *	@dev: device to handle
- *	@enable: 'true' - enable, 'false' - disable the wake-up capability
- */
-int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
-{
-	acpi_handle handle;
-	struct acpi_device *adev;
-	int error;
-
-	if (!device_can_wakeup(dev))
-		return -EINVAL;
-
-	handle = DEVICE_ACPI_HANDLE(dev);
-	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
-		dev_dbg(dev, "ACPI handle has no context in %s!\n", __func__);
-		return -ENODEV;
-	}
-
-	error = enable ?
-		acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) :
-		acpi_disable_wakeup_device_power(adev);
-	if (!error)
-		dev_info(dev, "wake-up capability %s by ACPI\n",
-				enable ? "enabled" : "disabled");
-
-	return error;
-}
-#endif  /* CONFIG_PM_SLEEP */
-
 static void acpi_power_off_prepare(void)
 {
 	/* Prepare to power off the system */

drivers/base/power/domain.c

@@ -470,10 +470,19 @@ static int pm_genpd_poweroff(struct generic_pm_domain *genpd)
 		return -EBUSY;
 
 	not_suspended = 0;
-	list_for_each_entry(pdd, &genpd->dev_list, list_node)
+	list_for_each_entry(pdd, &genpd->dev_list, list_node) {
+		enum pm_qos_flags_status stat;
+
+		stat = dev_pm_qos_flags(pdd->dev,
+					PM_QOS_FLAG_NO_POWER_OFF
+						| PM_QOS_FLAG_REMOTE_WAKEUP);
+		if (stat > PM_QOS_FLAGS_NONE)
+			return -EBUSY;
+
 		if (pdd->dev->driver && (!pm_runtime_suspended(pdd->dev)
 		    || pdd->dev->power.irq_safe))
 			not_suspended++;
+	}
 
 	if (not_suspended > genpd->in_progress)
 		return -EBUSY;

drivers/base/power/power.h

@@ -93,8 +93,10 @@ extern void dpm_sysfs_remove(struct device *dev);
 extern void rpm_sysfs_remove(struct device *dev);
 extern int wakeup_sysfs_add(struct device *dev);
 extern void wakeup_sysfs_remove(struct device *dev);
-extern int pm_qos_sysfs_add(struct device *dev);
-extern void pm_qos_sysfs_remove(struct device *dev);
+extern int pm_qos_sysfs_add_latency(struct device *dev);
+extern void pm_qos_sysfs_remove_latency(struct device *dev);
+extern int pm_qos_sysfs_add_flags(struct device *dev);
+extern void pm_qos_sysfs_remove_flags(struct device *dev);
 
 #else /* CONFIG_PM */
 

drivers/base/power/qos.c

@@ -40,6 +40,7 @@
 #include <linux/device.h>
 #include <linux/mutex.h>
 #include <linux/export.h>
+#include <linux/pm_runtime.h>
 
 #include "power.h"
 
@@ -47,6 +48,50 @@ static DEFINE_MUTEX(dev_pm_qos_mtx);
 
 static BLOCKING_NOTIFIER_HEAD(dev_pm_notifiers);
 
+/**
+ * __dev_pm_qos_flags - Check PM QoS flags for a given device.
+ * @dev: Device to check the PM QoS flags for.
+ * @mask: Flags to check against.
+ *
+ * This routine must be called with dev->power.lock held.
+ */
+enum pm_qos_flags_status __dev_pm_qos_flags(struct device *dev, s32 mask)
+{
+	struct dev_pm_qos *qos = dev->power.qos;
+	struct pm_qos_flags *pqf;
+	s32 val;
+
+	if (!qos)
+		return PM_QOS_FLAGS_UNDEFINED;
+
+	pqf = &qos->flags;
+	if (list_empty(&pqf->list))
+		return PM_QOS_FLAGS_UNDEFINED;
+
+	val = pqf->effective_flags & mask;
+	if (val)
+		return (val == mask) ? PM_QOS_FLAGS_ALL : PM_QOS_FLAGS_SOME;
+
+	return PM_QOS_FLAGS_NONE;
+}
+
+/**
+ * dev_pm_qos_flags - Check PM QoS flags for a given device (locked).
+ * @dev: Device to check the PM QoS flags for.
+ * @mask: Flags to check against.
+ */
+enum pm_qos_flags_status dev_pm_qos_flags(struct device *dev, s32 mask)
+{
+	unsigned long irqflags;
+	enum pm_qos_flags_status ret;
+
+	spin_lock_irqsave(&dev->power.lock, irqflags);
+	ret = __dev_pm_qos_flags(dev, mask);
+	spin_unlock_irqrestore(&dev->power.lock, irqflags);
+
+	return ret;
+}
+
 /**
  * __dev_pm_qos_read_value - Get PM QoS constraint for a given device.
  * @dev: Device to get the PM QoS constraint value for.
@@ -55,9 +100,7 @@ static BLOCKING_NOTIFIER_HEAD(dev_pm_notifiers);
  */
 s32 __dev_pm_qos_read_value(struct device *dev)
 {
-	struct pm_qos_constraints *c = dev->power.constraints;
-
-	return c ? pm_qos_read_value(c) : 0;
+	return dev->power.qos ? pm_qos_read_value(&dev->power.qos->latency) : 0;
 }
 
 /**
@@ -76,31 +119,40 @@ s32 dev_pm_qos_read_value(struct device *dev)
 	return ret;
 }
 
-/*
- * apply_constraint
- * @req: constraint request to apply
- * @action: action to perform add/update/remove, of type enum pm_qos_req_action
- * @value: defines the qos request
+/**
+ * apply_constraint - Add/modify/remove device PM QoS request.
+ * @req: Constraint request to apply
+ * @action: Action to perform (add/update/remove).
+ * @value: Value to assign to the QoS request.
  *
  * Internal function to update the constraints list using the PM QoS core
  * code and if needed call the per-device and the global notification
  * callbacks
  */
 static int apply_constraint(struct dev_pm_qos_request *req,
-			    enum pm_qos_req_action action, int value)
+			    enum pm_qos_req_action action, s32 value)
 {
-	int ret, curr_value;
-
-	ret = pm_qos_update_target(req->dev->power.constraints,
-				   &req->node, action, value);
+	struct dev_pm_qos *qos = req->dev->power.qos;
+	int ret;
 
+	switch(req->type) {
+	case DEV_PM_QOS_LATENCY:
+		ret = pm_qos_update_target(&qos->latency, &req->data.pnode,
+					   action, value);
 		if (ret) {
-		/* Call the global callbacks if needed */
-		curr_value = pm_qos_read_value(req->dev->power.constraints);
+			value = pm_qos_read_value(&qos->latency);
 			blocking_notifier_call_chain(&dev_pm_notifiers,
-					     (unsigned long)curr_value,
+						     (unsigned long)value,
 						     req);
 		}
+		break;
+	case DEV_PM_QOS_FLAGS:
+		ret = pm_qos_update_flags(&qos->flags, &req->data.flr,
+					  action, value);
+		break;
+	default:
+		ret = -EINVAL;
+	}
 
 	return ret;
 }
@@ -114,28 +166,32 @@ static int apply_constraint(struct dev_pm_qos_request *req,
  */
 static int dev_pm_qos_constraints_allocate(struct device *dev)
 {
+	struct dev_pm_qos *qos;
 	struct pm_qos_constraints *c;
 	struct blocking_notifier_head *n;
 
-	c = kzalloc(sizeof(*c), GFP_KERNEL);
-	if (!c)
+	qos = kzalloc(sizeof(*qos), GFP_KERNEL);
+	if (!qos)
 		return -ENOMEM;
 
 	n = kzalloc(sizeof(*n), GFP_KERNEL);
 	if (!n) {
-		kfree(c);
+		kfree(qos);
 		return -ENOMEM;
 	}
 	BLOCKING_INIT_NOTIFIER_HEAD(n);
 
+	c = &qos->latency;
 	plist_head_init(&c->list);
 	c->target_value = PM_QOS_DEV_LAT_DEFAULT_VALUE;
 	c->default_value = PM_QOS_DEV_LAT_DEFAULT_VALUE;
 	c->type = PM_QOS_MIN;
 	c->notifiers = n;
 
+	INIT_LIST_HEAD(&qos->flags.list);
+
 	spin_lock_irq(&dev->power.lock);
-	dev->power.constraints = c;
+	dev->power.qos = qos;
 	spin_unlock_irq(&dev->power.lock);
 
 	return 0;
@@ -151,7 +207,7 @@ static int dev_pm_qos_constraints_allocate(struct device *dev)
 void dev_pm_qos_constraints_init(struct device *dev)
 {
 	mutex_lock(&dev_pm_qos_mtx);
-	dev->power.constraints = NULL;
+	dev->power.qos = NULL;
 	dev->power.power_state = PMSG_ON;
 	mutex_unlock(&dev_pm_qos_mtx);
 }
@@ -164,6 +220,7 @@ void dev_pm_qos_constraints_init(struct device *dev)
  */
 void dev_pm_qos_constraints_destroy(struct device *dev)
 {
+	struct dev_pm_qos *qos;
 	struct dev_pm_qos_request *req, *tmp;
 	struct pm_qos_constraints *c;
 
@@ -176,12 +233,13 @@ void dev_pm_qos_constraints_destroy(struct device *dev)
 	mutex_lock(&dev_pm_qos_mtx);
 
 	dev->power.power_state = PMSG_INVALID;
-	c = dev->power.constraints;
-	if (!c)
+	qos = dev->power.qos;
+	if (!qos)
 		goto out;
 
+	c = &qos->latency;
 	/* Flush the constraints list for the device */
-	plist_for_each_entry_safe(req, tmp, &c->list, node) {
+	plist_for_each_entry_safe(req, tmp, &c->list, data.pnode) {
 		/*
 		 * Update constraints list and call the notification
 		 * callbacks if needed
@@ -191,11 +249,11 @@ void dev_pm_qos_constraints_destroy(struct device *dev)
 	}
 
 	spin_lock_irq(&dev->power.lock);
-	dev->power.constraints = NULL;
+	dev->power.qos = NULL;
 	spin_unlock_irq(&dev->power.lock);
 
 	kfree(c->notifiers);
-	kfree(c);
+	kfree(qos);
 
  out:
 	mutex_unlock(&dev_pm_qos_mtx);
@@ -205,6 +263,7 @@ void dev_pm_qos_constraints_destroy(struct device *dev)
  * dev_pm_qos_add_request - inserts new qos request into the list
  * @dev: target device for the constraint
  * @req: pointer to a preallocated handle
+ * @type: type of the request
  * @value: defines the qos request
  *
  * This function inserts a new entry in the device constraints list of
@@ -218,9 +277,12 @@ void dev_pm_qos_constraints_destroy(struct device *dev)
  * -EINVAL in case of wrong parameters, -ENOMEM if there's not enough memory
  * to allocate for data structures, -ENODEV if the device has just been removed
  * from the system.
+ *
+ * Callers should ensure that the target device is not RPM_SUSPENDED before
+ * using this function for requests of type DEV_PM_QOS_FLAGS.
  */
 int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req,
-			   s32 value)
+			   enum dev_pm_qos_req_type type, s32 value)
 {
 	int ret = 0;
 
@@ -235,7 +297,7 @@ int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req,
 
 	mutex_lock(&dev_pm_qos_mtx);
 
-	if (!dev->power.constraints) {
+	if (!dev->power.qos) {
 		if (dev->power.power_state.event == PM_EVENT_INVALID) {
 			/* The device has been removed from the system. */
 			req->dev = NULL;
@@ -251,8 +313,10 @@ int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req,
 		}
 	}
 
-	if (!ret)
+	if (!ret) {
+		req->type = type;
 		ret = apply_constraint(req, PM_QOS_ADD_REQ, value);
+	}
 
  out:
 	mutex_unlock(&dev_pm_qos_mtx);
@@ -261,6 +325,37 @@ int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req,
 }
 EXPORT_SYMBOL_GPL(dev_pm_qos_add_request);
 
+/**
+ * __dev_pm_qos_update_request - Modify an existing device PM QoS request.
+ * @req : PM QoS request to modify.
+ * @new_value: New value to request.
+ */
+static int __dev_pm_qos_update_request(struct dev_pm_qos_request *req,
+				       s32 new_value)
+{
+	s32 curr_value;
+	int ret = 0;
+
+	if (!req->dev->power.qos)
+		return -ENODEV;
+
+	switch(req->type) {
+	case DEV_PM_QOS_LATENCY:
+		curr_value = req->data.pnode.prio;
+		break;
+	case DEV_PM_QOS_FLAGS:
+		curr_value = req->data.flr.flags;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (curr_value != new_value)
+		ret = apply_constraint(req, PM_QOS_UPDATE_REQ, new_value);
+
+	return ret;
+}
+
 /**
  * dev_pm_qos_update_request - modifies an existing qos request
  * @req : handle to list element holding a dev_pm_qos request to use
@@ -275,11 +370,13 @@ EXPORT_SYMBOL_GPL(dev_pm_qos_add_request);
  * 0 if the aggregated constraint value has not changed,
  * -EINVAL in case of wrong parameters, -ENODEV if the device has been
  * removed from the system
+ *
+ * Callers should ensure that the target device is not RPM_SUSPENDED before
+ * using this function for requests of type DEV_PM_QOS_FLAGS.
  */
-int dev_pm_qos_update_request(struct dev_pm_qos_request *req,
-			      s32 new_value)
+int dev_pm_qos_update_request(struct dev_pm_qos_request *req, s32 new_value)
 {
-	int ret = 0;
+	int ret;
 
 	if (!req) /*guard against callers passing in null */
 		return -EINVAL;
@@ -289,17 +386,9 @@ int dev_pm_qos_update_request(struct dev_pm_qos_request *req,
 		return -EINVAL;
 
 	mutex_lock(&dev_pm_qos_mtx);
-
-	if (req->dev->power.constraints) {
-		if (new_value != req->node.prio)
-			ret = apply_constraint(req, PM_QOS_UPDATE_REQ,
-					       new_value);
-	} else {
-		/* Return if the device has been removed */
-		ret = -ENODEV;
-	}
-
+	ret = __dev_pm_qos_update_request(req, new_value);
 	mutex_unlock(&dev_pm_qos_mtx);
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(dev_pm_qos_update_request);
@@ -315,6 +404,9 @@ EXPORT_SYMBOL_GPL(dev_pm_qos_update_request);
  * 0 if the aggregated constraint value has not changed,
  * -EINVAL in case of wrong parameters, -ENODEV if the device has been
  * removed from the system
+ *
+ * Callers should ensure that the target device is not RPM_SUSPENDED before
+ * using this function for requests of type DEV_PM_QOS_FLAGS.
  */
 int dev_pm_qos_remove_request(struct dev_pm_qos_request *req)
 {
@@ -329,7 +421,7 @@ int dev_pm_qos_remove_request(struct dev_pm_qos_request *req)
 
 	mutex_lock(&dev_pm_qos_mtx);
 
-	if (req->dev->power.constraints) {
+	if (req->dev->power.qos) {
 		ret = apply_constraint(req, PM_QOS_REMOVE_REQ,
 				       PM_QOS_DEFAULT_VALUE);
 		memset(req, 0, sizeof(*req));
@@ -362,13 +454,13 @@ int dev_pm_qos_add_notifier(struct device *dev, struct notifier_block *notifier)
 
 	mutex_lock(&dev_pm_qos_mtx);
 
-	if (!dev->power.constraints)
+	if (!dev->power.qos)
 		ret = dev->power.power_state.event != PM_EVENT_INVALID ?
 			dev_pm_qos_constraints_allocate(dev) : -ENODEV;
 
 	if (!ret)
 		ret = blocking_notifier_chain_register(
-				dev->power.constraints->notifiers, notifier);
+				dev->power.qos->latency.notifiers, notifier);
 
 	mutex_unlock(&dev_pm_qos_mtx);
 	return ret;
@@ -393,9 +485,9 @@ int dev_pm_qos_remove_notifier(struct device *dev,
 	mutex_lock(&dev_pm_qos_mtx);
 
 	/* Silently return if the constraints object is not present. */
-	if (dev->power.constraints)
+	if (dev->power.qos)
 		retval = blocking_notifier_chain_unregister(
-				dev->power.constraints->notifiers,
+				dev->power.qos->latency.notifiers,
 				notifier);
 
 	mutex_unlock(&dev_pm_qos_mtx);
@@ -449,7 +541,8 @@ int dev_pm_qos_add_ancestor_request(struct device *dev,
 		ancestor = ancestor->parent;
 
 	if (ancestor)
-		error = dev_pm_qos_add_request(ancestor, req, value);
+		error = dev_pm_qos_add_request(ancestor, req,
+					       DEV_PM_QOS_LATENCY, value);
 
 	if (error)
 		req->dev = NULL;
@@ -459,10 +552,19 @@ int dev_pm_qos_add_ancestor_request(struct device *dev,
 EXPORT_SYMBOL_GPL(dev_pm_qos_add_ancestor_request);
 
 #ifdef CONFIG_PM_RUNTIME
-static void __dev_pm_qos_drop_user_request(struct device *dev)
+static void __dev_pm_qos_drop_user_request(struct device *dev,
+					   enum dev_pm_qos_req_type type)
 {
-	dev_pm_qos_remove_request(dev->power.pq_req);
-	dev->power.pq_req = NULL;
+	switch(type) {
+	case DEV_PM_QOS_LATENCY:
+		dev_pm_qos_remove_request(dev->power.qos->latency_req);
+		dev->power.qos->latency_req = NULL;
+		break;
+	case DEV_PM_QOS_FLAGS:
+		dev_pm_qos_remove_request(dev->power.qos->flags_req);
+		dev->power.qos->flags_req = NULL;
+		break;
+	}
 }
 
 /**
@@ -478,21 +580,21 @@ int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value)
 	if (!device_is_registered(dev) || value < 0)
 		return -EINVAL;
 
-	if (dev->power.pq_req)
+	if (dev->power.qos && dev->power.qos->latency_req)
 		return -EEXIST;
 
 	req = kzalloc(sizeof(*req), GFP_KERNEL);
 	if (!req)
 		return -ENOMEM;
 
-	ret = dev_pm_qos_add_request(dev, req, value);
+	ret = dev_pm_qos_add_request(dev, req, DEV_PM_QOS_LATENCY, value);
 	if (ret < 0)
 		return ret;
 
-	dev->power.pq_req = req;
-	ret = pm_qos_sysfs_add(dev);
+	dev->power.qos->latency_req = req;
+	ret = pm_qos_sysfs_add_latency(dev);
 	if (ret)
-		__dev_pm_qos_drop_user_request(dev);
+		__dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY);
 
 	return ret;
 }
@@ -504,10 +606,92 @@ EXPORT_SYMBOL_GPL(dev_pm_qos_expose_latency_limit);
  */
 void dev_pm_qos_hide_latency_limit(struct device *dev)
 {
-	if (dev->power.pq_req) {
-		pm_qos_sysfs_remove(dev);
-		__dev_pm_qos_drop_user_request(dev);
+	if (dev->power.qos && dev->power.qos->latency_req) {
+		pm_qos_sysfs_remove_latency(dev);
+		__dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY);
 	}
 }
 EXPORT_SYMBOL_GPL(dev_pm_qos_hide_latency_limit);
+
+/**
+ * dev_pm_qos_expose_flags - Expose PM QoS flags of a device to user space.
+ * @dev: Device whose PM QoS flags are to be exposed to user space.
+ * @val: Initial values of the flags.
+ */
+int dev_pm_qos_expose_flags(struct device *dev, s32 val)
+{
+	struct dev_pm_qos_request *req;
+	int ret;
+
+	if (!device_is_registered(dev))
+		return -EINVAL;
+
+	if (dev->power.qos && dev->power.qos->flags_req)
+		return -EEXIST;
+
+	req = kzalloc(sizeof(*req), GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+
+	pm_runtime_get_sync(dev);
+	ret = dev_pm_qos_add_request(dev, req, DEV_PM_QOS_FLAGS, val);
+	if (ret < 0)
+		goto fail;
+
+	dev->power.qos->flags_req = req;
+	ret = pm_qos_sysfs_add_flags(dev);
+	if (ret)
+		__dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS);
+
+fail:
+	pm_runtime_put(dev);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_qos_expose_flags);
+
+/**
+ * dev_pm_qos_hide_flags - Hide PM QoS flags of a device from user space.
+ * @dev: Device whose PM QoS flags are to be hidden from user space.
+ */
+void dev_pm_qos_hide_flags(struct device *dev)
+{
+	if (dev->power.qos && dev->power.qos->flags_req) {
+		pm_qos_sysfs_remove_flags(dev);
+		pm_runtime_get_sync(dev);
+		__dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS);
+		pm_runtime_put(dev);
+	}
+}
+EXPORT_SYMBOL_GPL(dev_pm_qos_hide_flags);
+
+/**
+ * dev_pm_qos_update_flags - Update PM QoS flags request owned by user space.
+ * @dev: Device to update the PM QoS flags request for.
+ * @mask: Flags to set/clear.
+ * @set: Whether to set or clear the flags (true means set).
+ */
+int dev_pm_qos_update_flags(struct device *dev, s32 mask, bool set)
+{
+	s32 value;
+	int ret;
+
+	if (!dev->power.qos || !dev->power.qos->flags_req)
+		return -EINVAL;
+
+	pm_runtime_get_sync(dev);
+	mutex_lock(&dev_pm_qos_mtx);
+
+	value = dev_pm_qos_requested_flags(dev);
+	if (set)
+		value |= mask;
+	else
+		value &= ~mask;
+
+	ret = __dev_pm_qos_update_request(dev->power.qos->flags_req, value);
+
+	mutex_unlock(&dev_pm_qos_mtx);
+	pm_runtime_put(dev);
+
+	return ret;
+}
 #endif /* CONFIG_PM_RUNTIME */

drivers/base/power/sysfs.c

@@ -221,7 +221,7 @@ static DEVICE_ATTR(autosuspend_delay_ms, 0644, autosuspend_delay_ms_show,
 static ssize_t pm_qos_latency_show(struct device *dev,
 				   struct device_attribute *attr, char *buf)
 {
-	return sprintf(buf, "%d\n", dev->power.pq_req->node.prio);
+	return sprintf(buf, "%d\n", dev_pm_qos_requested_latency(dev));
 }
 
 static ssize_t pm_qos_latency_store(struct device *dev,
@@ -237,12 +237,66 @@ static ssize_t pm_qos_latency_store(struct device *dev,
 	if (value < 0)
 		return -EINVAL;
 
-	ret = dev_pm_qos_update_request(dev->power.pq_req, value);
+	ret = dev_pm_qos_update_request(dev->power.qos->latency_req, value);
 	return ret < 0 ? ret : n;
 }
 
 static DEVICE_ATTR(pm_qos_resume_latency_us, 0644,
 		   pm_qos_latency_show, pm_qos_latency_store);
+
+static ssize_t pm_qos_no_power_off_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	return sprintf(buf, "%d\n", !!(dev_pm_qos_requested_flags(dev)
+					& PM_QOS_FLAG_NO_POWER_OFF));
+}
+
+static ssize_t pm_qos_no_power_off_store(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t n)
+{
+	int ret;
+
+	if (kstrtoint(buf, 0, &ret))
+		return -EINVAL;
+
+	if (ret != 0 && ret != 1)
+		return -EINVAL;
+
+	ret = dev_pm_qos_update_flags(dev, PM_QOS_FLAG_NO_POWER_OFF, ret);
+	return ret < 0 ? ret : n;
+}
+
+static DEVICE_ATTR(pm_qos_no_power_off, 0644,
+		   pm_qos_no_power_off_show, pm_qos_no_power_off_store);
+
+static ssize_t pm_qos_remote_wakeup_show(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	return sprintf(buf, "%d\n", !!(dev_pm_qos_requested_flags(dev)
+					& PM_QOS_FLAG_REMOTE_WAKEUP));
+}
+
+static ssize_t pm_qos_remote_wakeup_store(struct device *dev,
+					  struct device_attribute *attr,
+					  const char *buf, size_t n)
+{
+	int ret;
+
+	if (kstrtoint(buf, 0, &ret))
+		return -EINVAL;
+
+	if (ret != 0 && ret != 1)
+		return -EINVAL;
+
+	ret = dev_pm_qos_update_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP, ret);
+	return ret < 0 ? ret : n;
+}
+
+static DEVICE_ATTR(pm_qos_remote_wakeup, 0644,
+		   pm_qos_remote_wakeup_show, pm_qos_remote_wakeup_store);
 #endif /* CONFIG_PM_RUNTIME */
 
 #ifdef CONFIG_PM_SLEEP
@@ -564,15 +618,27 @@ static struct attribute_group pm_runtime_attr_group = {
 	.attrs	= runtime_attrs,
 };
 
-static struct attribute *pm_qos_attrs[] = {
+static struct attribute *pm_qos_latency_attrs[] = {
 #ifdef CONFIG_PM_RUNTIME
 	&dev_attr_pm_qos_resume_latency_us.attr,
 #endif /* CONFIG_PM_RUNTIME */
 	NULL,
 };
-static struct attribute_group pm_qos_attr_group = {
+static struct attribute_group pm_qos_latency_attr_group = {
+	.name	= power_group_name,
+	.attrs	= pm_qos_latency_attrs,
+};
+
+static struct attribute *pm_qos_flags_attrs[] = {
+#ifdef CONFIG_PM_RUNTIME
+	&dev_attr_pm_qos_no_power_off.attr,
+	&dev_attr_pm_qos_remote_wakeup.attr,
+#endif /* CONFIG_PM_RUNTIME */
+	NULL,
+};
+static struct attribute_group pm_qos_flags_attr_group = {
 	.name	= power_group_name,
-	.attrs	= pm_qos_attrs,
+	.attrs	= pm_qos_flags_attrs,
 };
 
 int dpm_sysfs_add(struct device *dev)
@@ -615,14 +681,24 @@ void wakeup_sysfs_remove(struct device *dev)
 	sysfs_unmerge_group(&dev->kobj, &pm_wakeup_attr_group);
 }
 
-int pm_qos_sysfs_add(struct device *dev)
+int pm_qos_sysfs_add_latency(struct device *dev)
+{
+	return sysfs_merge_group(&dev->kobj, &pm_qos_latency_attr_group);
+}
+
+void pm_qos_sysfs_remove_latency(struct device *dev)
+{
+	sysfs_unmerge_group(&dev->kobj, &pm_qos_latency_attr_group);
+}
+
+int pm_qos_sysfs_add_flags(struct device *dev)
 {
-	return sysfs_merge_group(&dev->kobj, &pm_qos_attr_group);
+	return sysfs_merge_group(&dev->kobj, &pm_qos_flags_attr_group);
 }
 
-void pm_qos_sysfs_remove(struct device *dev)
+void pm_qos_sysfs_remove_flags(struct device *dev)
 {
-	sysfs_unmerge_group(&dev->kobj, &pm_qos_attr_group);
+	sysfs_unmerge_group(&dev->kobj, &pm_qos_flags_attr_group);
 }
 
 void rpm_sysfs_remove(struct device *dev)

drivers/mtd/nand/sh_flctl.c

@@ -727,7 +727,9 @@ static void flctl_select_chip(struct mtd_info *mtd, int chipnr)
 
 		if (!flctl->qos_request) {
 			ret = dev_pm_qos_add_request(&flctl->pdev->dev,
-							&flctl->pm_qos, 100);
+							&flctl->pm_qos,
+							DEV_PM_QOS_LATENCY,
+							100);
 			if (ret < 0)
 				dev_err(&flctl->pdev->dev,
 					"PM QoS request failed: %d\n", ret);

drivers/pci/pci-acpi.c

@@ -17,10 +17,9 @@
 
 #include <linux/pci-acpi.h>
 #include <linux/pm_runtime.h>
+#include <linux/pm_qos.h>
 #include "pci.h"
 
-static DEFINE_MUTEX(pci_acpi_pm_notify_mtx);
-
 /**
  * pci_acpi_wake_bus - Wake-up notification handler for root buses.
  * @handle: ACPI handle of a device the notification is for.
@@ -67,67 +66,6 @@ static void pci_acpi_wake_dev(acpi_handle handle, u32 event, void *context)
 		pci_pme_wakeup_bus(pci_dev->subordinate);
 }
 
-/**
- * add_pm_notifier - Register PM notifier for given ACPI device.
- * @dev: ACPI device to add the notifier for.
- * @context: PCI device or bus to check for PME status if an event is signaled.
- *
- * NOTE: @dev need not be a run-wake or wake-up device to be a valid source of
- * PM wake-up events.  For example, wake-up events may be generated for bridges
- * if one of the devices below the bridge is signaling PME, even if the bridge
- * itself doesn't have a wake-up GPE associated with it.
- */
-static acpi_status add_pm_notifier(struct acpi_device *dev,
-				   acpi_notify_handler handler,
-				   void *context)
-{
-	acpi_status status = AE_ALREADY_EXISTS;
-
-	mutex_lock(&pci_acpi_pm_notify_mtx);
-
-	if (dev->wakeup.flags.notifier_present)
-		goto out;
-
-	status = acpi_install_notify_handler(dev->handle,
-					     ACPI_SYSTEM_NOTIFY,
-					     handler, context);
-	if (ACPI_FAILURE(status))
-		goto out;
-
-	dev->wakeup.flags.notifier_present = true;
-
- out:
-	mutex_unlock(&pci_acpi_pm_notify_mtx);
-	return status;
-}
-
-/**
- * remove_pm_notifier - Unregister PM notifier from given ACPI device.
- * @dev: ACPI device to remove the notifier from.
- */
-static acpi_status remove_pm_notifier(struct acpi_device *dev,
-				      acpi_notify_handler handler)
-{
-	acpi_status status = AE_BAD_PARAMETER;
-
-	mutex_lock(&pci_acpi_pm_notify_mtx);
-
-	if (!dev->wakeup.flags.notifier_present)
-		goto out;
-
-	status = acpi_remove_notify_handler(dev->handle,
-					    ACPI_SYSTEM_NOTIFY,
-					    handler);
-	if (ACPI_FAILURE(status))
-		goto out;
-
-	dev->wakeup.flags.notifier_present = false;
-
- out:
-	mutex_unlock(&pci_acpi_pm_notify_mtx);
-	return status;
-}
-
 /**
  * pci_acpi_add_bus_pm_notifier - Register PM notifier for given PCI bus.
  * @dev: ACPI device to add the notifier for.
@@ -136,7 +74,7 @@ static acpi_status remove_pm_notifier(struct acpi_device *dev,
 acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev,
 					 struct pci_bus *pci_bus)
 {
-	return add_pm_notifier(dev, pci_acpi_wake_bus, pci_bus);
+	return acpi_add_pm_notifier(dev, pci_acpi_wake_bus, pci_bus);
 }
 
 /**
@@ -145,7 +83,7 @@ acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev,
  */
 acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev)
 {
-	return remove_pm_notifier(dev, pci_acpi_wake_bus);
+	return acpi_remove_pm_notifier(dev, pci_acpi_wake_bus);
 }
 
 /**
@@ -156,7 +94,7 @@ acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev)
 acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev,
 				     struct pci_dev *pci_dev)
 {
-	return add_pm_notifier(dev, pci_acpi_wake_dev, pci_dev);
+	return acpi_add_pm_notifier(dev, pci_acpi_wake_dev, pci_dev);
 }
 
 /**
@@ -165,7 +103,7 @@ acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev,
  */
 acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev)
 {
-	return remove_pm_notifier(dev, pci_acpi_wake_dev);
+	return acpi_remove_pm_notifier(dev, pci_acpi_wake_dev);
 }
 
 phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle)
@@ -257,11 +195,16 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 		return -ENODEV;
 
 	switch (state) {
+	case PCI_D3cold:
+		if (dev_pm_qos_flags(&dev->dev, PM_QOS_FLAG_NO_POWER_OFF) ==
+				PM_QOS_FLAGS_ALL) {
+			error = -EBUSY;
+			break;
+		}
 	case PCI_D0:
 	case PCI_D1:
 	case PCI_D2:
 	case PCI_D3hot:
-	case PCI_D3cold:
 		error = acpi_bus_set_power(handle, state_conv[state]);
 	}
 

include/acpi/acpi_bus.h

@@ -201,6 +201,7 @@ struct acpi_device_power_flags {
 struct acpi_device_power_state {
 	struct {
 		u8 valid:1;
+		u8 os_accessible:1;
 		u8 explicit_set:1;	/* _PSx present? */
 		u8 reserved:6;
 	} flags;
@@ -339,6 +340,7 @@ acpi_status acpi_bus_get_status_handle(acpi_handle handle,
 				       unsigned long long *sta);
 int acpi_bus_get_status(struct acpi_device *device);
 int acpi_bus_set_power(acpi_handle handle, int state);
+int acpi_device_set_power(struct acpi_device *device, int state);
 int acpi_bus_update_power(acpi_handle handle, int *state_p);
 bool acpi_bus_power_manageable(acpi_handle handle);
 bool acpi_bus_can_wakeup(acpi_handle handle);
@@ -416,30 +418,94 @@ int acpi_enable_wakeup_device_power(struct acpi_device *dev, int state);
 int acpi_disable_wakeup_device_power(struct acpi_device *dev);
 
 #ifdef CONFIG_PM
+acpi_status acpi_add_pm_notifier(struct acpi_device *adev,
+				 acpi_notify_handler handler, void *context);
+acpi_status acpi_remove_pm_notifier(struct acpi_device *adev,
+				    acpi_notify_handler handler);
+int acpi_device_power_state(struct device *dev, struct acpi_device *adev,
+			    u32 target_state, int d_max_in, int *d_min_p);
 int acpi_pm_device_sleep_state(struct device *, int *, int);
 #else
-static inline int acpi_pm_device_sleep_state(struct device *d, int *p, int m)
+static inline acpi_status acpi_add_pm_notifier(struct acpi_device *adev,
+					       acpi_notify_handler handler,
+					       void *context)
+{
+	return AE_SUPPORT;
+}
+static inline acpi_status acpi_remove_pm_notifier(struct acpi_device *adev,
+						  acpi_notify_handler handler)
+{
+	return AE_SUPPORT;
+}
+static inline int __acpi_device_power_state(int m, int *p)
 {
 	if (p)
 		*p = ACPI_STATE_D0;
 	return (m >= ACPI_STATE_D0 && m <= ACPI_STATE_D3) ? m : ACPI_STATE_D0;
 }
+static inline int acpi_device_power_state(struct device *dev,
+					  struct acpi_device *adev,
+					  u32 target_state, int d_max_in,
+					  int *d_min_p)
+{
+	return __acpi_device_power_state(d_max_in, d_min_p);
+}
+static inline int acpi_pm_device_sleep_state(struct device *d, int *p, int m)
+{
+	return __acpi_device_power_state(m, p);
+}
 #endif
 
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM_RUNTIME
+int __acpi_device_run_wake(struct acpi_device *, bool);
 int acpi_pm_device_run_wake(struct device *, bool);
-int acpi_pm_device_sleep_wake(struct device *, bool);
 #else
+static inline int __acpi_device_run_wake(struct acpi_device *adev, bool en)
+{
+	return -ENODEV;
+}
 static inline int acpi_pm_device_run_wake(struct device *dev, bool enable)
 {
 	return -ENODEV;
 }
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+int __acpi_device_sleep_wake(struct acpi_device *, u32, bool);
+int acpi_pm_device_sleep_wake(struct device *, bool);
+#else
+static inline int __acpi_device_sleep_wake(struct acpi_device *adev,
+					   u32 target_state, bool enable)
+{
+	return -ENODEV;
+}
 static inline int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
 {
 	return -ENODEV;
 }
 #endif
 
+#ifdef CONFIG_ACPI_SLEEP
+u32 acpi_target_system_state(void);
+#else
+static inline u32 acpi_target_system_state(void) { return ACPI_STATE_S0; }
+#endif
+
+static inline bool acpi_device_power_manageable(struct acpi_device *adev)
+{
+	return adev->flags.power_manageable;
+}
+
+static inline bool acpi_device_can_wakeup(struct acpi_device *adev)
+{
+	return adev->wakeup.flags.valid;
+}
+
+static inline bool acpi_device_can_poweroff(struct acpi_device *adev)
+{
+	return adev->power.states[ACPI_STATE_D3_COLD].flags.os_accessible;
+}
+
 #else	/* CONFIG_ACPI */
 
 static inline int register_acpi_bus_type(void *bus) { return 0; }

include/linux/acpi.h

@@ -25,6 +25,7 @@
 #ifndef _LINUX_ACPI_H
 #define _LINUX_ACPI_H
 
+#include <linux/errno.h>
 #include <linux/ioport.h>	/* for struct resource */
 #include <linux/device.h>
 
@@ -478,4 +479,41 @@ acpi_status acpi_os_prepare_sleep(u8 sleep_state,
 #define acpi_os_set_prepare_sleep(func, pm1a_ctrl, pm1b_ctrl) do { } while (0)
 #endif
 
+#if defined(CONFIG_ACPI) && defined(CONFIG_PM_RUNTIME)
+int acpi_dev_runtime_suspend(struct device *dev);
+int acpi_dev_runtime_resume(struct device *dev);
+int acpi_subsys_runtime_suspend(struct device *dev);
+int acpi_subsys_runtime_resume(struct device *dev);
+#else
+static inline int acpi_dev_runtime_suspend(struct device *dev) { return 0; }
+static inline int acpi_dev_runtime_resume(struct device *dev) { return 0; }
+static inline int acpi_subsys_runtime_suspend(struct device *dev) { return 0; }
+static inline int acpi_subsys_runtime_resume(struct device *dev) { return 0; }
+#endif
+
+#ifdef CONFIG_ACPI_SLEEP
+int acpi_dev_suspend_late(struct device *dev);
+int acpi_dev_resume_early(struct device *dev);
+int acpi_subsys_prepare(struct device *dev);
+int acpi_subsys_suspend_late(struct device *dev);
+int acpi_subsys_resume_early(struct device *dev);
+#else
+static inline int acpi_dev_suspend_late(struct device *dev) { return 0; }
+static inline int acpi_dev_resume_early(struct device *dev) { return 0; }
+static inline int acpi_subsys_prepare(struct device *dev) { return 0; }
+static inline int acpi_subsys_suspend_late(struct device *dev) { return 0; }
+static inline int acpi_subsys_resume_early(struct device *dev) { return 0; }
+#endif
+
+#if defined(CONFIG_ACPI) && defined(CONFIG_PM)
+int acpi_dev_pm_attach(struct device *dev, bool power_on);
+int acpi_dev_pm_detach(struct device *dev, bool power_off);
+#else
+static inline int acpi_dev_pm_attach(struct device *dev, bool power_on)
+{
+	return -ENODEV;
+}
+static inline void acpi_dev_pm_detach(struct device *dev, bool power_off) {}
+#endif
+
 #endif	/*_LINUX_ACPI_H*/

include/linux/pm.h

@@ -546,10 +546,9 @@ struct dev_pm_info {
 	unsigned long		active_jiffies;
 	unsigned long		suspended_jiffies;
 	unsigned long		accounting_timestamp;
-	struct dev_pm_qos_request *pq_req;
 #endif
 	struct pm_subsys_data	*subsys_data;  /* Owned by the subsystem. */
-	struct pm_qos_constraints *constraints;
+	struct dev_pm_qos	*qos;
 };
 
 extern void update_pm_runtime_accounting(struct device *dev);

include/linux/pm_qos.h

@@ -20,6 +20,13 @@ enum {
 	PM_QOS_NUM_CLASSES,
 };
 
+enum pm_qos_flags_status {
+	PM_QOS_FLAGS_UNDEFINED = -1,
+	PM_QOS_FLAGS_NONE,
+	PM_QOS_FLAGS_SOME,
+	PM_QOS_FLAGS_ALL,
+};
+
 #define PM_QOS_DEFAULT_VALUE -1
 
 #define PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE	(2000 * USEC_PER_SEC)
@@ -27,14 +34,31 @@ enum {
 #define PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE	0
 #define PM_QOS_DEV_LAT_DEFAULT_VALUE		0
 
+#define PM_QOS_FLAG_NO_POWER_OFF	(1 << 0)
+#define PM_QOS_FLAG_REMOTE_WAKEUP	(1 << 1)
+
 struct pm_qos_request {
 	struct plist_node node;
 	int pm_qos_class;
 	struct delayed_work work; /* for pm_qos_update_request_timeout */
 };
 
+struct pm_qos_flags_request {
+	struct list_head node;
+	s32 flags;	/* Do not change to 64 bit */
+};
+
+enum dev_pm_qos_req_type {
+	DEV_PM_QOS_LATENCY = 1,
+	DEV_PM_QOS_FLAGS,
+};
+
 struct dev_pm_qos_request {
-	struct plist_node node;
+	enum dev_pm_qos_req_type type;
+	union {
+		struct plist_node pnode;
+		struct pm_qos_flags_request flr;
+	} data;
 	struct device *dev;
 };
 
@@ -45,8 +69,8 @@ enum pm_qos_type {
 };
 
 /*
- * Note: The lockless read path depends on the CPU accessing
- * target_value atomically.  Atomic access is only guaranteed on all CPU
+ * Note: The lockless read path depends on the CPU accessing target_value
+ * or effective_flags atomically.  Atomic access is only guaranteed on all CPU
  * types linux supports for 32 bit quantites
  */
 struct pm_qos_constraints {
@@ -57,6 +81,18 @@ struct pm_qos_constraints {
 	struct blocking_notifier_head *notifiers;
 };
 
+struct pm_qos_flags {
+	struct list_head list;
+	s32 effective_flags;	/* Do not change to 64 bit */
+};
+
+struct dev_pm_qos {
+	struct pm_qos_constraints latency;
+	struct pm_qos_flags flags;
+	struct dev_pm_qos_request *latency_req;
+	struct dev_pm_qos_request *flags_req;
+};
+
 /* Action requested to pm_qos_update_target */
 enum pm_qos_req_action {
 	PM_QOS_ADD_REQ,		/* Add a new request */
@@ -71,6 +107,9 @@ static inline int dev_pm_qos_request_active(struct dev_pm_qos_request *req)
 
 int pm_qos_update_target(struct pm_qos_constraints *c, struct plist_node *node,
 			 enum pm_qos_req_action action, int value);
+bool pm_qos_update_flags(struct pm_qos_flags *pqf,
+			 struct pm_qos_flags_request *req,
+			 enum pm_qos_req_action action, s32 val);
 void pm_qos_add_request(struct pm_qos_request *req, int pm_qos_class,
 			s32 value);
 void pm_qos_update_request(struct pm_qos_request *req,
@@ -86,10 +125,12 @@ int pm_qos_request_active(struct pm_qos_request *req);
 s32 pm_qos_read_value(struct pm_qos_constraints *c);
 
 #ifdef CONFIG_PM
+enum pm_qos_flags_status __dev_pm_qos_flags(struct device *dev, s32 mask);
+enum pm_qos_flags_status dev_pm_qos_flags(struct device *dev, s32 mask);
 s32 __dev_pm_qos_read_value(struct device *dev);
 s32 dev_pm_qos_read_value(struct device *dev);
 int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req,
-			   s32 value);
+			   enum dev_pm_qos_req_type type, s32 value);
 int dev_pm_qos_update_request(struct dev_pm_qos_request *req, s32 new_value);
 int dev_pm_qos_remove_request(struct dev_pm_qos_request *req);
 int dev_pm_qos_add_notifier(struct device *dev,
@@ -103,12 +144,19 @@ void dev_pm_qos_constraints_destroy(struct device *dev);
 int dev_pm_qos_add_ancestor_request(struct device *dev,
 				    struct dev_pm_qos_request *req, s32 value);
 #else
+static inline enum pm_qos_flags_status __dev_pm_qos_flags(struct device *dev,
+							  s32 mask)
+			{ return PM_QOS_FLAGS_UNDEFINED; }
+static inline enum pm_qos_flags_status dev_pm_qos_flags(struct device *dev,
+							s32 mask)
+			{ return PM_QOS_FLAGS_UNDEFINED; }
 static inline s32 __dev_pm_qos_read_value(struct device *dev)
 			{ return 0; }
 static inline s32 dev_pm_qos_read_value(struct device *dev)
 			{ return 0; }
 static inline int dev_pm_qos_add_request(struct device *dev,
 					 struct dev_pm_qos_request *req,
+					 enum dev_pm_qos_req_type type,
 					 s32 value)
 			{ return 0; }
 static inline int dev_pm_qos_update_request(struct dev_pm_qos_request *req,
@@ -144,10 +192,31 @@ static inline int dev_pm_qos_add_ancestor_request(struct device *dev,
 #ifdef CONFIG_PM_RUNTIME
 int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value);
 void dev_pm_qos_hide_latency_limit(struct device *dev);
+int dev_pm_qos_expose_flags(struct device *dev, s32 value);
+void dev_pm_qos_hide_flags(struct device *dev);
+int dev_pm_qos_update_flags(struct device *dev, s32 mask, bool set);
+
+static inline s32 dev_pm_qos_requested_latency(struct device *dev)
+{
+	return dev->power.qos->latency_req->data.pnode.prio;
+}
+
+static inline s32 dev_pm_qos_requested_flags(struct device *dev)
+{
+	return dev->power.qos->flags_req->data.flr.flags;
+}
 #else
 static inline int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value)
 			{ return 0; }
 static inline void dev_pm_qos_hide_latency_limit(struct device *dev) {}
+static inline int dev_pm_qos_expose_flags(struct device *dev, s32 value)
+			{ return 0; }
+static inline void dev_pm_qos_hide_flags(struct device *dev) {}
+static inline int dev_pm_qos_update_flags(struct device *dev, s32 m, bool set)
+			{ return 0; }
+
+static inline s32 dev_pm_qos_requested_latency(struct device *dev) { return 0; }
+static inline s32 dev_pm_qos_requested_flags(struct device *dev) { return 0; }
 #endif
 
 #endif

kernel/power/qos.c

@@ -212,6 +212,69 @@ int pm_qos_update_target(struct pm_qos_constraints *c, struct plist_node *node,
 	}
 }
 
+/**
+ * pm_qos_flags_remove_req - Remove device PM QoS flags request.
+ * @pqf: Device PM QoS flags set to remove the request from.
+ * @req: Request to remove from the set.
+ */
+static void pm_qos_flags_remove_req(struct pm_qos_flags *pqf,
+				    struct pm_qos_flags_request *req)
+{
+	s32 val = 0;
+
+	list_del(&req->node);
+	list_for_each_entry(req, &pqf->list, node)
+		val |= req->flags;
+
+	pqf->effective_flags = val;
+}
+
+/**
+ * pm_qos_update_flags - Update a set of PM QoS flags.
+ * @pqf: Set of flags to update.
+ * @req: Request to add to the set, to modify, or to remove from the set.
+ * @action: Action to take on the set.
+ * @val: Value of the request to add or modify.
+ *
+ * Update the given set of PM QoS flags and call notifiers if the aggregate
+ * value has changed.  Returns 1 if the aggregate constraint value has changed,
+ * 0 otherwise.
+ */
+bool pm_qos_update_flags(struct pm_qos_flags *pqf,
+			 struct pm_qos_flags_request *req,
+			 enum pm_qos_req_action action, s32 val)
+{
+	unsigned long irqflags;
+	s32 prev_value, curr_value;
+
+	spin_lock_irqsave(&pm_qos_lock, irqflags);
+
+	prev_value = list_empty(&pqf->list) ? 0 : pqf->effective_flags;
+
+	switch (action) {
+	case PM_QOS_REMOVE_REQ:
+		pm_qos_flags_remove_req(pqf, req);
+		break;
+	case PM_QOS_UPDATE_REQ:
+		pm_qos_flags_remove_req(pqf, req);
+	case PM_QOS_ADD_REQ:
+		req->flags = val;
+		INIT_LIST_HEAD(&req->node);
+		list_add_tail(&req->node, &pqf->list);
+		pqf->effective_flags |= val;
+		break;
+	default:
+		/* no action */
+		;
+	}
+
+	curr_value = list_empty(&pqf->list) ? 0 : pqf->effective_flags;
+
+	spin_unlock_irqrestore(&pm_qos_lock, irqflags);
+
+	return prev_value != curr_value;
+}
+
 /**
  * pm_qos_request - returns current system wide qos expectation
  * @pm_qos_class: identification of which qos value is requested