Commit 467fea09 authored by Russell King's avatar Russell King

[ARM] SA1100 cleanups:

 - Only map Neponset if Neponset is present.
 - Remove IRQ debugging
 - Move GPIO_11_27_IRQ macro
 - Supply CS macros to define physical addresses.
 - Remove defunct PCMCIA base addresses definitions.
parent 64f841a5
...@@ -103,7 +103,6 @@ static int __init assabet_init(void) ...@@ -103,7 +103,6 @@ static int __init assabet_init(void)
* or BCR_clear(). * or BCR_clear().
*/ */
ASSABET_BCR = BCR_value = ASSABET_BCR_DB1111; ASSABET_BCR = BCR_value = ASSABET_BCR_DB1111;
NCR_0 = 0;
#ifndef CONFIG_ASSABET_NEPONSET #ifndef CONFIG_ASSABET_NEPONSET
printk( "Warning: Neponset detected but full support " printk( "Warning: Neponset detected but full support "
...@@ -311,6 +310,7 @@ static void __init assabet_map_io(void) ...@@ -311,6 +310,7 @@ static void __init assabet_map_io(void)
sa1100_map_io(); sa1100_map_io();
iotable_init(assabet_io_desc); iotable_init(assabet_io_desc);
if (machine_has_neponset()) {
#ifdef CONFIG_ASSABET_NEPONSET #ifdef CONFIG_ASSABET_NEPONSET
/* /*
* We map Neponset registers even if it isn't present since * We map Neponset registers even if it isn't present since
...@@ -320,8 +320,6 @@ static void __init assabet_map_io(void) ...@@ -320,8 +320,6 @@ static void __init assabet_map_io(void)
*/ */
neponset_map_io(); neponset_map_io();
#endif #endif
if (machine_has_neponset()) {
/* /*
* When Neponset is attached, the first UART should be * When Neponset is attached, the first UART should be
* UART3. That's what Angel is doing and many documents * UART3. That's what Angel is doing and many documents
......
...@@ -40,32 +40,30 @@ static void sa1100_manual_rerun(unsigned int irq) ...@@ -40,32 +40,30 @@ static void sa1100_manual_rerun(unsigned int irq)
irq_desc[irq].handle(irq, &irq_desc[irq], &regs); irq_desc[irq].handle(irq, &irq_desc[irq], &regs);
} }
/*
* To get the GPIO number from an IRQ number
*/
#define GPIO_11_27_IRQ(i) ((i) - 21)
#define GPIO11_27_MASK(irq) (1 << GPIO_11_27_IRQ(irq)) #define GPIO11_27_MASK(irq) (1 << GPIO_11_27_IRQ(irq))
static int sa1100_gpio_type(unsigned int irq, unsigned int type) static int sa1100_gpio_type(unsigned int irq, unsigned int type)
{ {
unsigned int mask; unsigned int mask;
printk(KERN_DEBUG "IRQ%d: ", irq);
if (irq <= 10) if (irq <= 10)
mask = 1 << irq; mask = 1 << irq;
else else
mask = GPIO11_27_MASK(irq); mask = GPIO11_27_MASK(irq);
if (type & __IRQT_RISEDGE) { if (type & __IRQT_RISEDGE) {
printk("rising ");
GPIO_IRQ_rising_edge |= mask; GPIO_IRQ_rising_edge |= mask;
} else } else
GPIO_IRQ_rising_edge &= ~mask; GPIO_IRQ_rising_edge &= ~mask;
if (type & __IRQT_FALEDGE) { if (type & __IRQT_FALEDGE) {
printk("falling ");
GPIO_IRQ_falling_edge |= mask; GPIO_IRQ_falling_edge |= mask;
} else } else
GPIO_IRQ_falling_edge &= ~mask; GPIO_IRQ_falling_edge &= ~mask;
printk("edges\n");
GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask; GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask; GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
......
...@@ -84,7 +84,7 @@ neponset_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *reg ...@@ -84,7 +84,7 @@ neponset_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *reg
} }
} }
static void __init neponset_init_irq(void) static inline void __init neponset_init_irq(void)
{ {
/* /*
* Install handler for GPIO25. * Install handler for GPIO25.
...@@ -102,6 +102,64 @@ static void __init neponset_init_irq(void) ...@@ -102,6 +102,64 @@ static void __init neponset_init_irq(void)
set_irq_flags(IRQ_NEPONSET_USAR, IRQF_VALID | IRQF_PROBE); set_irq_flags(IRQ_NEPONSET_USAR, IRQF_VALID | IRQF_PROBE);
} }
static void neponset_set_mctrl(struct uart_port *port, u_int mctrl)
{
u_int mdm_ctl0 = MDM_CTL_0;
if (port->mapbase == _Ser1UTCR0) {
if (mctrl & TIOCM_RTS)
mdm_ctl0 &= ~MDM_CTL0_RTS2;
else
mdm_ctl0 |= MDM_CTL0_RTS2;
if (mctrl & TIOCM_DTR)
mdm_ctl0 &= ~MDM_CTL0_DTR2;
else
mdm_ctl0 |= MDM_CTL0_DTR2;
} else if (port->mapbase == _Ser3UTCR0) {
if (mctrl & TIOCM_RTS)
mdm_ctl0 &= ~MDM_CTL0_RTS1;
else
mdm_ctl0 |= MDM_CTL0_RTS1;
if (mctrl & TIOCM_DTR)
mdm_ctl0 &= ~MDM_CTL0_DTR1;
else
mdm_ctl0 |= MDM_CTL0_DTR1;
}
MDM_CTL_0 = mdm_ctl0;
}
static u_int neponset_get_mctrl(struct uart_port *port)
{
u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
u_int mdm_ctl1 = MDM_CTL_1;
if (port->mapbase == _Ser1UTCR0) {
if (mdm_ctl1 & MDM_CTL1_DCD2)
ret &= ~TIOCM_CD;
if (mdm_ctl1 & MDM_CTL1_CTS2)
ret &= ~TIOCM_CTS;
if (mdm_ctl1 & MDM_CTL1_DSR2)
ret &= ~TIOCM_DSR;
} else if (port->mapbase == _Ser3UTCR0) {
if (mdm_ctl1 & MDM_CTL1_DCD1)
ret &= ~TIOCM_CD;
if (mdm_ctl1 & MDM_CTL1_CTS1)
ret &= ~TIOCM_CTS;
if (mdm_ctl1 & MDM_CTL1_DSR1)
ret &= ~TIOCM_DSR;
}
return ret;
}
static struct sa1100_port_fns neponset_port_fns __initdata = {
set_mctrl: neponset_set_mctrl,
get_mctrl: neponset_get_mctrl,
};
static int __init neponset_init(void) static int __init neponset_init(void)
{ {
int ret; int ret;
...@@ -134,12 +192,14 @@ static int __init neponset_init(void) ...@@ -134,12 +192,14 @@ static int __init neponset_init(void)
if (ret) if (ret)
return ret; return ret;
sa1100_register_uart_fns(&neponset_port_fns);
neponset_init_irq(); neponset_init_irq();
/* /*
* Disable GPIO 0/1 drivers so the buttons work on the module. * Disable GPIO 0/1 drivers so the buttons work on the module.
*/ */
NCR_0 |= NCR_GP01_OFF; NCR_0 = NCR_GP01_OFF;
/* /*
* Neponset has SA1111 connected to CS4. We know that after * Neponset has SA1111 connected to CS4. We know that after
...@@ -162,67 +222,7 @@ static struct map_desc neponset_io_desc[] __initdata = { ...@@ -162,67 +222,7 @@ static struct map_desc neponset_io_desc[] __initdata = {
LAST_DESC LAST_DESC
}; };
static void neponset_set_mctrl(struct uart_port *port, u_int mctrl)
{
u_int mdm_ctl0 = MDM_CTL_0;
if (port->mapbase == _Ser1UTCR0) {
if (mctrl & TIOCM_RTS)
mdm_ctl0 &= ~MDM_CTL0_RTS2;
else
mdm_ctl0 |= MDM_CTL0_RTS2;
if (mctrl & TIOCM_DTR)
mdm_ctl0 &= ~MDM_CTL0_DTR2;
else
mdm_ctl0 |= MDM_CTL0_DTR2;
} else if (port->mapbase == _Ser3UTCR0) {
if (mctrl & TIOCM_RTS)
mdm_ctl0 &= ~MDM_CTL0_RTS1;
else
mdm_ctl0 |= MDM_CTL0_RTS1;
if (mctrl & TIOCM_DTR)
mdm_ctl0 &= ~MDM_CTL0_DTR1;
else
mdm_ctl0 |= MDM_CTL0_DTR1;
}
MDM_CTL_0 = mdm_ctl0;
}
static u_int neponset_get_mctrl(struct uart_port *port)
{
u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
u_int mdm_ctl1 = MDM_CTL_1;
if (port->mapbase == _Ser1UTCR0) {
if (mdm_ctl1 & MDM_CTL1_DCD2)
ret &= ~TIOCM_CD;
if (mdm_ctl1 & MDM_CTL1_CTS2)
ret &= ~TIOCM_CTS;
if (mdm_ctl1 & MDM_CTL1_DSR2)
ret &= ~TIOCM_DSR;
} else if (port->mapbase == _Ser3UTCR0) {
if (mdm_ctl1 & MDM_CTL1_DCD1)
ret &= ~TIOCM_CD;
if (mdm_ctl1 & MDM_CTL1_CTS1)
ret &= ~TIOCM_CTS;
if (mdm_ctl1 & MDM_CTL1_DSR1)
ret &= ~TIOCM_DSR;
}
return ret;
}
static struct sa1100_port_fns neponset_port_fns __initdata = {
set_mctrl: neponset_set_mctrl,
get_mctrl: neponset_get_mctrl,
};
void __init neponset_map_io(void) void __init neponset_map_io(void)
{ {
iotable_init(neponset_io_desc); iotable_init(neponset_io_desc);
if (machine_has_neponset())
sa1100_register_uart_fns(&neponset_port_fns);
} }
...@@ -22,6 +22,16 @@ ...@@ -22,6 +22,16 @@
#include "bitfield.h" #include "bitfield.h"
/*
* SA1100 CS line to physical address
*/
#define SA1100_CS0_PHYS 0x00000000
#define SA1100_CS1_PHYS 0x08000000
#define SA1100_CS2_PHYS 0x10000000
#define SA1100_CS3_PHYS 0x18000000
#define SA1100_CS4_PHYS 0x40000000
#define SA1100_CS5_PHYS 0x48000000
/* /*
* Personal Computer Memory Card International Association (PCMCIA) sockets * Personal Computer Memory Card International Association (PCMCIA) sockets
......
...@@ -23,15 +23,6 @@ ...@@ -23,15 +23,6 @@
#define UNCACHEABLE_ADDR 0xfa050000 #define UNCACHEABLE_ADDR 0xfa050000
/*
* Those are statically mapped PCMCIA IO space for designs using it as a
* generic IO bus, typically with ISA parts, hardwired IDE interfaces, etc.
* The actual PCMCIA code is mapping required IO region at run time.
*/
#define PCMCIA_IO_0_BASE 0xf6000000
#define PCMCIA_IO_1_BASE 0xf7000000
/* /*
* We requires absolute addresses i.e. (PCMCIA_IO_0_BASE + 0x3f8) for * We requires absolute addresses i.e. (PCMCIA_IO_0_BASE + 0x3f8) for
* in*()/out*() macros to be usable for all cases. * in*()/out*() macros to be usable for all cases.
......
...@@ -60,11 +60,6 @@ ...@@ -60,11 +60,6 @@
#define IRQ_GPIO26 47 #define IRQ_GPIO26 47
#define IRQ_GPIO27 48 #define IRQ_GPIO27 48
/*
* To get the GPIO number from an IRQ number
*/
#define GPIO_11_27_IRQ(i) ((i) - 21)
/* /*
* The next 16 interrupts are for board specific purposes. Since * The next 16 interrupts are for board specific purposes. Since
* the kernel can only run on one machine at a time, we can re-use * the kernel can only run on one machine at a time, we can re-use
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment