Merge branch 'net-dsa-b53-VLAN-and-L2-fixes'

Florian Fainelli says:

====================
net: dsa: b53: VLAN and L2 fixes

This patch series contains a collection of fixes to the b53 driver in
order to:

- consistently program the same default VLAN ID when a port is bridged
  or not
- properly account for VLAN filtering being turned on/off and turning
  on ingress VID checking accordingly
- have SYSTEMPORT properly forward BPDU frames to the network stack
  (which it did not)
- do not assume that WoL is supported by the DSA master network device
  we are connected to
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/dsa/b53/b53_common.c

@@ -344,7 +344,8 @@ static void b53_set_forwarding(struct b53_device *dev, int enable)
 	b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt);
 }
 
-static void b53_enable_vlan(struct b53_device *dev, bool enable)
+static void b53_enable_vlan(struct b53_device *dev, bool enable,
+			    bool enable_filtering)
 {
 	u8 mgmt, vc0, vc1, vc4 = 0, vc5;
 
@@ -369,8 +370,13 @@ static void b53_enable_vlan(struct b53_device *dev, bool enable)
 		vc0 |= VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID;
 		vc1 |= VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN;
 		vc4 &= ~VC4_ING_VID_CHECK_MASK;
+		if (enable_filtering) {
 			vc4 |= VC4_ING_VID_VIO_DROP << VC4_ING_VID_CHECK_S;
 			vc5 |= VC5_DROP_VTABLE_MISS;
+		} else {
+			vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S;
+			vc5 &= ~VC5_DROP_VTABLE_MISS;
+		}
 
 		if (is5325(dev))
 			vc0 &= ~VC0_RESERVED_1;
@@ -420,6 +426,9 @@ static void b53_enable_vlan(struct b53_device *dev, bool enable)
 	}
 
 	b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
+
+	dev->vlan_enabled = enable;
+	dev->vlan_filtering_enabled = enable_filtering;
 }
 
 static int b53_set_jumbo(struct b53_device *dev, bool enable, bool allow_10_100)
@@ -632,25 +641,35 @@ static void b53_enable_mib(struct b53_device *dev)
 	b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc);
 }
 
+static u16 b53_default_pvid(struct b53_device *dev)
+{
+	if (is5325(dev) || is5365(dev))
+		return 1;
+	else
+		return 0;
+}
+
 int b53_configure_vlan(struct dsa_switch *ds)
 {
 	struct b53_device *dev = ds->priv;
 	struct b53_vlan vl = { 0 };
-	int i;
+	int i, def_vid;
+
+	def_vid = b53_default_pvid(dev);
 
 	/* clear all vlan entries */
 	if (is5325(dev) || is5365(dev)) {
-		for (i = 1; i < dev->num_vlans; i++)
+		for (i = def_vid; i < dev->num_vlans; i++)
 			b53_set_vlan_entry(dev, i, &vl);
 	} else {
 		b53_do_vlan_op(dev, VTA_CMD_CLEAR);
 	}
 
-	b53_enable_vlan(dev, false);
+	b53_enable_vlan(dev, false, dev->vlan_filtering_enabled);
 
 	b53_for_each_port(dev, i)
 		b53_write16(dev, B53_VLAN_PAGE,
-			    B53_VLAN_PORT_DEF_TAG(i), 1);
+			    B53_VLAN_PORT_DEF_TAG(i), def_vid);
 
 	if (!is5325(dev) && !is5365(dev))
 		b53_set_jumbo(dev, dev->enable_jumbo, false);
@@ -1255,6 +1274,46 @@ EXPORT_SYMBOL(b53_phylink_mac_link_up);
 
 int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering)
 {
+	struct b53_device *dev = ds->priv;
+	struct net_device *bridge_dev;
+	unsigned int i;
+	u16 pvid, new_pvid;
+
+	/* Handle the case were multiple bridges span the same switch device
+	 * and one of them has a different setting than what is being requested
+	 * which would be breaking filtering semantics for any of the other
+	 * bridge devices.
+	 */
+	b53_for_each_port(dev, i) {
+		bridge_dev = dsa_to_port(ds, i)->bridge_dev;
+		if (bridge_dev &&
+		    bridge_dev != dsa_to_port(ds, port)->bridge_dev &&
+		    br_vlan_enabled(bridge_dev) != vlan_filtering) {
+			netdev_err(bridge_dev,
+				   "VLAN filtering is global to the switch!\n");
+			return -EINVAL;
+		}
+	}
+
+	b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), &pvid);
+	new_pvid = pvid;
+	if (dev->vlan_filtering_enabled && !vlan_filtering) {
+		/* Filtering is currently enabled, use the default PVID since
+		 * the bridge does not expect tagging anymore
+		 */
+		dev->ports[port].pvid = pvid;
+		new_pvid = b53_default_pvid(dev);
+	} else if (!dev->vlan_filtering_enabled && vlan_filtering) {
+		/* Filtering is currently disabled, restore the previous PVID */
+		new_pvid = dev->ports[port].pvid;
+	}
+
+	if (pvid != new_pvid)
+		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port),
+			    new_pvid);
+
+	b53_enable_vlan(dev, dev->vlan_enabled, vlan_filtering);
+
 	return 0;
 }
 EXPORT_SYMBOL(b53_vlan_filtering);
@@ -1270,7 +1329,7 @@ int b53_vlan_prepare(struct dsa_switch *ds, int port,
 	if (vlan->vid_end > dev->num_vlans)
 		return -ERANGE;
 
-	b53_enable_vlan(dev, true);
+	b53_enable_vlan(dev, true, dev->vlan_filtering_enabled);
 
 	return 0;
 }
@@ -1300,7 +1359,7 @@ void b53_vlan_add(struct dsa_switch *ds, int port,
 		b53_fast_age_vlan(dev, vid);
 	}
 
-	if (pvid) {
+	if (pvid && !dsa_is_cpu_port(ds, port)) {
 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port),
 			    vlan->vid_end);
 		b53_fast_age_vlan(dev, vid);
@@ -1326,12 +1385,8 @@ int b53_vlan_del(struct dsa_switch *ds, int port,
 
 		vl->members &= ~BIT(port);
 
-		if (pvid == vid) {
-			if (is5325(dev) || is5365(dev))
-				pvid = 1;
-			else
-				pvid = 0;
-		}
+		if (pvid == vid)
+			pvid = b53_default_pvid(dev);
 
 		if (untagged && !dsa_is_cpu_port(ds, port))
 			vl->untag &= ~(BIT(port));
@@ -1644,10 +1699,7 @@ void b53_br_leave(struct dsa_switch *ds, int port, struct net_device *br)
 	b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
 	dev->ports[port].vlan_ctl_mask = pvlan;
 
-	if (is5325(dev) || is5365(dev))
-		pvid = 1;
-	else
-		pvid = 0;
+	pvid = b53_default_pvid(dev);
 
 	/* Make this port join all VLANs without VLAN entries */
 	if (is58xx(dev)) {

drivers/net/dsa/b53/b53_priv.h

@@ -91,6 +91,7 @@ enum {
 struct b53_port {
 	u16		vlan_ctl_mask;
 	struct ethtool_eee eee;
+	u16		pvid;
 };
 
 struct b53_vlan {
@@ -137,6 +138,8 @@ struct b53_device {
 
 	unsigned int num_vlans;
 	struct b53_vlan *vlans;
+	bool vlan_enabled;
+	bool vlan_filtering_enabled;
 	unsigned int num_ports;
 	struct b53_port *ports;
 };

drivers/net/dsa/bcm_sf2.c

@@ -726,9 +726,10 @@ static void bcm_sf2_sw_get_wol(struct dsa_switch *ds, int port,
 {
 	struct net_device *p = ds->ports[port].cpu_dp->master;
 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-	struct ethtool_wolinfo pwol;
+	struct ethtool_wolinfo pwol = { };
 
 	/* Get the parent device WoL settings */
+	if (p->ethtool_ops->get_wol)
 		p->ethtool_ops->get_wol(p, &pwol);
 
 	/* Advertise the parent device supported settings */
@@ -750,8 +751,9 @@ static int bcm_sf2_sw_set_wol(struct dsa_switch *ds, int port,
 	struct net_device *p = ds->ports[port].cpu_dp->master;
 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
 	s8 cpu_port = ds->ports[port].cpu_dp->index;
-	struct ethtool_wolinfo pwol;
+	struct ethtool_wolinfo pwol =  { };
 
+	if (p->ethtool_ops->get_wol)
 		p->ethtool_ops->get_wol(p, &pwol);
 	if (wol->wolopts & ~pwol.supported)
 		return -EINVAL;

drivers/net/ethernet/broadcom/bcmsysport.c

@@ -134,6 +134,10 @@ static void bcm_sysport_set_rx_csum(struct net_device *dev,
 
 	priv->rx_chk_en = !!(wanted & NETIF_F_RXCSUM);
 	reg = rxchk_readl(priv, RXCHK_CONTROL);
+	/* Clear L2 header checks, which would prevent BPDUs
+	 * from being received.
+	 */
+	reg &= ~RXCHK_L2_HDR_DIS;
 	if (priv->rx_chk_en)
 		reg |= RXCHK_EN;
 	else