Skip to content

L
linux
Commit 4702d599 authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files
Options

Merge tag 'xgene-dts-for-v4.5-v1' of https://github.com/AppliedMicro/xgene-next into next/dt64 

Merge "DTS changes for X-Gene platforms queued for v4.5" from Duc Dang

This patch set adds DTS entries to support various IPs
for X-Gene v1 and X-Gene v2 SoC:
- X-Gene v1: Enable support for MMC, USB, GPIO controllers,
  I2C controller, L2 Cache topology
- X-Gene v2: Enable support for MMC, USB, GPIO controller,
  I2C controller (with RTC), PCIe controller with GICv2m MSI,
  EDAC, L2 Cache topology, TRNG

* tag 'xgene-dts-for-v4.5-v1' of https://github.com/AppliedMicro/xgene-next:
  arm64: dts: Add L2 cache topology for APM X-Gene SoC
  arm64: dts: Add RTC DTS entry for X-Gene v2 SoC platform
  arm64: dts: Add Designware I2C controller DTS entries for X-Gene v2 SoC platform
  arm64: dts: Add Designware I2C controller DTS entries for X-Gene v1 SoC
  arm64: dts: Add APM X-Gene v2 SoC EDAC DTS entries
  arm64: dts: Add APM X-Gene v2 SoC Designware GPIO controller DTS entry
  arm64: dts: Add Designware GPIO dts binding for APM X-Gene v1 platform
  arm64: dts: Add APM X-Gene v2 SoC GFC GPIO controller DTS entry
  arm64: dts: Add APM X-Gene v1 SoC GFC GPIO controller DTS entries
  arm64: dts: Add USB nodes for APM X-Gene v2 platforms
  arm64: dts: Add USB nodes for APM X-Gene v1 platforms
  arm64: dts: Add PCIe node for APM X-Gene v2 platforms
  arm64: dts: Add v2m MSI frame nodes for APM X-Gene v2 platforms
  arm64: dts: Add RNG device tree nodes for APM X-Gene v2 platform
  arm64: dts: X-Gene: Do not reset or enable/disable clock for AHB block
  arm64: dts: Add the arasan mmc DTS entries for APm X-Gene v2 SoC
  arm64: dts: Add the arasan mmc DTS entries for APM X-Gene v1 SoC
parents fd0adfd8 8000bc3f
Hide whitespace changes
Inline Side-by-side
Showing with 543 additions and 0 deletions
arch/arm64/boot/dts/apm/apm-merlin.dts
View file @ 4702d599
......@@ -70,3 +70,15 @@ &sgenet0 {
&xgenet1 {
status = "ok";
};
&mmc0 {
status = "ok";
};
&i2c4 {
rtc68: rtc@68 {
compatible = "dallas,ds1337";
reg = <0x68>;
status = "ok";
};
};
arch/arm64/boot/dts/apm/apm-mustang.dts
View file @ 4702d599
......@@ -74,3 +74,7 @@ &sgenet1 {
&xgenet {
status = "ok";
};
&mmc0 {
status = "ok";
};
arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
View file @ 4702d599
......@@ -25,6 +25,7 @@ cpu@000 {
reg = <0x0 0x000>;
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_0>;
};
cpu@001 {
device_type = "cpu";
......@@ -32,6 +33,7 @@ cpu@001 {
reg = <0x0 0x001>;
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_0>;
};
cpu@100 {
device_type = "cpu";
......@@ -39,6 +41,7 @@ cpu@100 {
reg = <0x0 0x100>;
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_1>;
};
cpu@101 {
device_type = "cpu";
......@@ -46,6 +49,7 @@ cpu@101 {
reg = <0x0 0x101>;
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_1>;
};
cpu@200 {
device_type = "cpu";
......@@ -53,6 +57,7 @@ cpu@200 {
reg = <0x0 0x200>;
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_2>;
};
cpu@201 {
device_type = "cpu";
......@@ -60,6 +65,7 @@ cpu@201 {
reg = <0x0 0x201>;
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_2>;
};
cpu@300 {
device_type = "cpu";
......@@ -67,6 +73,7 @@ cpu@300 {
reg = <0x0 0x300>;
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_3>;
};
cpu@301 {
device_type = "cpu";
......@@ -74,6 +81,19 @@ cpu@301 {
reg = <0x0 0x301>;
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_3>;
};
xgene_L2_0: l2-cache-0 {
compatible = "cache";
};
xgene_L2_1: l2-cache-1 {
compatible = "cache";
};
xgene_L2_2: l2-cache-2 {
compatible = "cache";
};
xgene_L2_3: l2-cache-3 {
compatible = "cache";
};
};
......@@ -89,6 +109,86 @@ gic: interrupt-controller@78090000 {
<0x0 0x780A0000 0x0 0x20000>, /* GIC CPU */
<0x0 0x780C0000 0x0 0x10000>, /* GIC VCPU Control */
<0x0 0x780E0000 0x0 0x20000>; /* GIC VCPU */
v2m0: v2m@0x00000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0x0 0x0 0x1000>;
};
v2m1: v2m@0x10000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0x10000 0x0 0x1000>;
};
v2m2: v2m@0x20000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0x20000 0x0 0x1000>;
};
v2m3: v2m@0x30000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0x30000 0x0 0x1000>;
};
v2m4: v2m@0x40000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0x40000 0x0 0x1000>;
};
v2m5: v2m@0x50000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0x50000 0x0 0x1000>;
};
v2m6: v2m@0x60000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0x60000 0x0 0x1000>;
};
v2m7: v2m@0x70000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0x70000 0x0 0x1000>;
};
v2m8: v2m@0x80000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0x80000 0x0 0x1000>;
};
v2m9: v2m@0x90000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0x90000 0x0 0x1000>;
};
v2m10: v2m@0xA0000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0xA0000 0x0 0x1000>;
};
v2m11: v2m@0xB0000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0xB0000 0x0 0x1000>;
};
v2m12: v2m@0xC0000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0xC0000 0x0 0x1000>;
};
v2m13: v2m@0xD0000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0xD0000 0x0 0x1000>;
};
v2m14: v2m@0xE0000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0xE0000 0x0 0x1000>;
};
v2m15: v2m@0xF0000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0xF0000 0x0 0x1000>;
};
};
pmu {
......@@ -140,6 +240,47 @@ socplldiv2: socplldiv2 {
clock-output-names = "socplldiv2";
};
ahbclk: ahbclk@17000000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
clocks = <&socplldiv2 0>;
reg = <0x0 0x17000000 0x0 0x2000>;
reg-names = "div-reg";
divider-offset = <0x164>;
divider-width = <0x5>;
divider-shift = <0x0>;
clock-output-names = "ahbclk";
};
sbapbclk: sbapbclk@1704c000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
clocks = <&ahbclk 0>;
reg = <0x0 0x1704c000 0x0 0x2000>;
reg-names = "div-reg";
divider-offset = <0x10>;
divider-width = <0x2>;
divider-shift = <0x0>;
clock-output-names = "sbapbclk";
};
sdioclk: sdioclk@1f2ac000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
clocks = <&socplldiv2 0>;
reg = <0x0 0x1f2ac000 0x0 0x1000
0x0 0x17000000 0x0 0x2000>;
reg-names = "csr-reg", "div-reg";
csr-offset = <0x0>;
csr-mask = <0x2>;
enable-offset = <0x8>;
enable-mask = <0x2>;
divider-offset = <0x178>;
divider-width = <0x8>;
divider-shift = <0x0>;
clock-output-names = "sdioclk";
};
pcie0clk: pcie0clk@1f2bc000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
......@@ -149,6 +290,15 @@ pcie0clk: pcie0clk@1f2bc000 {
clock-output-names = "pcie0clk";
};
pcie1clk: pcie1clk@1f2cc000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
clocks = <&socplldiv2 0>;
reg = <0x0 0x1f2cc000 0x0 0x1000>;
reg-names = "csr-reg";
clock-output-names = "pcie1clk";
};
xge0clk: xge0clk@1f61c000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
......@@ -170,6 +320,45 @@ xge1clk: xge1clk@1f62c000 {
csr-mask = <0x3>;
clock-output-names = "xge1clk";
};
rngpkaclk: rngpkaclk@17000000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
clocks = <&socplldiv2 0>;
reg = <0x0 0x17000000 0x0 0x2000>;
reg-names = "csr-reg";
csr-offset = <0xc>;
csr-mask = <0x10>;
enable-offset = <0x10>;
enable-mask = <0x10>;
clock-output-names = "rngpkaclk";
};
i2c1clk: i2c1clk@17000000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
clocks = <&sbapbclk 0>;
reg = <0x0 0x17000000 0x0 0x2000>;
reg-names = "csr-reg";
csr-offset = <0xc>;
csr-mask = <0x4>;
enable-offset = <0x10>;
enable-mask = <0x4>;
clock-output-names = "i2c1clk";
};
i2c4clk: i2c4clk@1704c000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
clocks = <&sbapbclk 0>;
reg = <0x0 0x1704c000 0x0 0x1000>;
reg-names = "csr-reg";
csr-offset = <0x0>;
csr-mask = <0x40>;
enable-offset = <0x8>;
enable-mask = <0x40>;
clock-output-names = "i2c4clk";
};
};
scu: system-clk-controller@17000000 {
......@@ -184,6 +373,99 @@ reboot: reboot@17000014 {
mask = <0x1>;
};
csw: csw@7e200000 {
compatible = "apm,xgene-csw", "syscon";
reg = <0x0 0x7e200000 0x0 0x1000>;
};
mcba: mcba@7e700000 {
compatible = "apm,xgene-mcb", "syscon";
reg = <0x0 0x7e700000 0x0 0x1000>;
};
mcbb: mcbb@7e720000 {
compatible = "apm,xgene-mcb", "syscon";
reg = <0x0 0x7e720000 0x0 0x1000>;
};
efuse: efuse@1054a000 {
compatible = "apm,xgene-efuse", "syscon";
reg = <0x0 0x1054a000 0x0 0x20>;
};
edac@78800000 {
compatible = "apm,xgene-edac";
#address-cells = <2>;
#size-cells = <2>;
ranges;
regmap-csw = <&csw>;
regmap-mcba = <&mcba>;
regmap-mcbb = <&mcbb>;
regmap-efuse = <&efuse>;
reg = <0x0 0x78800000 0x0 0x100>;
interrupts = <0x0 0x20 0x4>,
<0x0 0x21 0x4>,
<0x0 0x27 0x4>;
edacmc@7e800000 {
compatible = "apm,xgene-edac-mc";
reg = <0x0 0x7e800000 0x0 0x1000>;
memory-controller = <0>;
};
edacmc@7e840000 {
compatible = "apm,xgene-edac-mc";
reg = <0x0 0x7e840000 0x0 0x1000>;
memory-controller = <1>;
};
edacmc@7e880000 {
compatible = "apm,xgene-edac-mc";
reg = <0x0 0x7e880000 0x0 0x1000>;
memory-controller = <2>;
};
edacmc@7e8c0000 {
compatible = "apm,xgene-edac-mc";
reg = <0x0 0x7e8c0000 0x0 0x1000>;
memory-controller = <3>;
};
edacpmd@7c000000 {
compatible = "apm,xgene-edac-pmd";
reg = <0x0 0x7c000000 0x0 0x200000>;
pmd-controller = <0>;
};
edacpmd@7c200000 {
compatible = "apm,xgene-edac-pmd";
reg = <0x0 0x7c200000 0x0 0x200000>;
pmd-controller = <1>;
};
edacpmd@7c400000 {
compatible = "apm,xgene-edac-pmd";
reg = <0x0 0x7c400000 0x0 0x200000>;
pmd-controller = <2>;
};
edacpmd@7c600000 {
compatible = "apm,xgene-edac-pmd";
reg = <0x0 0x7c600000 0x0 0x200000>;
pmd-controller = <3>;
};
edacl3@7e600000 {
compatible = "apm,xgene-edac-l3-v2";
reg = <0x0 0x7e600000 0x0 0x1000>;
};
edacsoc@7e930000 {
compatible = "apm,xgene-edac-soc";
reg = <0x0 0x7e930000 0x0 0x1000>;
};
};
serial0: serial@10600000 {
device_type = "serial";
compatible = "ns16550";
......@@ -194,6 +476,65 @@ serial0: serial@10600000 {
interrupts = <0x0 0x4c 0x4>;
};
usb0: dwusb@19000000 {
status = "disabled";
compatible = "snps,dwc3";
reg = <0x0 0x19000000 0x0 0x100000>;
interrupts = <0x0 0x5d 0x4>;
dma-coherent;
dr_mode = "host";
};
pcie0: pcie@1f2b0000 {
status = "disabled";
device_type = "pci";
compatible = "apm,xgene-pcie", "apm,xgene2-pcie";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */
0xc0 0xd0000000 0x0 0x00040000>; /* PCI config space */
reg-names = "csr", "cfg";
ranges = <0x01000000 0x00 0x00000000 0xc0 0x10000000 0x00 0x00010000 /* io */
0x02000000 0x00 0x20000000 0xc1 0x20000000 0x00 0x20000000 /* mem */
0x43000000 0xe0 0x00000000 0xe0 0x00000000 0x20 0x00000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x10 0x1
0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x11 0x1
0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x12 0x1
0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x13 0x1>;
dma-coherent;
clocks = <&pcie0clk 0>;
msi-parent = <&v2m0>;
};
pcie1: pcie@1f2c0000 {
status = "disabled";
device_type = "pci";
compatible = "apm,xgene-pcie", "apm,xgene2-pcie";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = < 0x00 0x1f2c0000 0x0 0x00010000 /* Controller registers */
0xa0 0xd0000000 0x0 0x00040000>; /* PCI config space */
reg-names = "csr", "cfg";
ranges = <0x01000000 0x00 0x00000000 0xa0 0x10000000 0x00 0x00010000 /* io */
0x02000000 0x00 0x20000000 0xa1 0x20000000 0x00 0x20000000 /* mem */
0x43000000 0xb0 0x00000000 0xb0 0x00000000 0x10 0x00000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x16 0x1
0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x17 0x1
0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x18 0x1
0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x19 0x1>;
dma-coherent;
clocks = <&pcie1clk 0>;
msi-parent = <&v2m0>;
};
sata1: sata@1a000000 {
compatible = "apm,xgene-ahci";
reg = <0x0 0x1a000000 0x0 0x1000>,
......@@ -224,6 +565,38 @@ sata3: sata@1a400000 {
dma-coherent;
};
mmc0: mmc@1c000000 {
compatible = "arasan,sdhci-4.9a";
reg = <0x0 0x1c000000 0x0 0x100>;
interrupts = <0x0 0x49 0x4>;
dma-coherent;
no-1-8-v;
clock-names = "clk_xin", "clk_ahb";
clocks = <&sdioclk 0>, <&ahbclk 0>;
};
gfcgpio: gfcgpio@1f63c000 {
compatible = "apm,xgene-gpio";
reg = <0x0 0x1f63c000 0x0 0x40>;
gpio-controller;
#gpio-cells = <2>;
};
dwgpio: dwgpio@1c024000 {
compatible = "snps,dw-apb-gpio";
reg = <0x0 0x1c024000 0x0 0x1000>;
reg-io-width = <4>;
#address-cells = <1>;
#size-cells = <0>;
porta: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
snps,nr-gpios = <32>;
reg = <0>;
};
};
sbgpio: sbgpio@17001000{
compatible = "apm,xgene-gpio-sb";
reg = <0x0 0x17001000 0x0 0x400>;
......@@ -267,5 +640,33 @@ xgenet1: ethernet@1f620000 {
local-mac-address = [00 01 73 00 00 02];
phy-connection-type = "xgmii";
};
rng: rng@10520000 {
compatible = "apm,xgene-rng";
reg = <0x0 0x10520000 0x0 0x100>;
interrupts = <0x0 0x41 0x4>;
clocks = <&rngpkaclk 0>;
};
i2c1: i2c1@10511000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0x0 0x10511000 0x0 0x1000>;
interrupts = <0 0x45 0x4>;
#clock-cells = <1>;
clocks = <&i2c1clk 0>;
bus_num = <1>;
};
i2c4: i2c4@10640000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0x0 0x10640000 0x0 0x1000>;
interrupts = <0 0x3A 0x4>;
clocks = <&i2c4clk 0>;
bus_num = <4>;
};
};
};
arch/arm64/boot/dts/apm/apm-storm.dtsi
View file @ 4702d599
......@@ -25,6 +25,7 @@ cpu@000 {
reg = <0x0 0x000>;
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_0>;
};
cpu@001 {
device_type = "cpu";
......@@ -32,6 +33,7 @@ cpu@001 {
reg = <0x0 0x001>;
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_0>;
};
cpu@100 {
device_type = "cpu";
......@@ -39,6 +41,7 @@ cpu@100 {
reg = <0x0 0x100>;
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_1>;
};
cpu@101 {
device_type = "cpu";
......@@ -46,6 +49,7 @@ cpu@101 {
reg = <0x0 0x101>;
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_1>;
};
cpu@200 {
device_type = "cpu";
......@@ -53,6 +57,7 @@ cpu@200 {
reg = <0x0 0x200>;
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_2>;
};
cpu@201 {
device_type = "cpu";
......@@ -60,6 +65,7 @@ cpu@201 {
reg = <0x0 0x201>;
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_2>;
};
cpu@300 {
device_type = "cpu";
......@@ -67,6 +73,7 @@ cpu@300 {
reg = <0x0 0x300>;
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_3>;
};
cpu@301 {
device_type = "cpu";
......@@ -74,6 +81,19 @@ cpu@301 {
reg = <0x0 0x301>;
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_3>;
};
xgene_L2_0: l2-cache-0 {
compatible = "cache";
};
xgene_L2_1: l2-cache-1 {
compatible = "cache";
};
xgene_L2_2: l2-cache-2 {
compatible = "cache";
};
xgene_L2_3: l2-cache-3 {
compatible = "cache";
};
};
......@@ -150,6 +170,35 @@ socplldiv2: socplldiv2 {
clock-output-names = "socplldiv2";
};
ahbclk: ahbclk@17000000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
clocks = <&socplldiv2 0>;
reg = <0x0 0x17000000 0x0 0x2000>;
reg-names = "div-reg";
divider-offset = <0x164>;
divider-width = <0x5>;
divider-shift = <0x0>;
clock-output-names = "ahbclk";
};
sdioclk: sdioclk@1f2ac000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
clocks = <&socplldiv2 0>;
reg = <0x0 0x1f2ac000 0x0 0x1000
0x0 0x17000000 0x0 0x2000>;
reg-names = "csr-reg", "div-reg";
csr-offset = <0x0>;
csr-mask = <0x2>;
enable-offset = <0x8>;
enable-mask = <0x2>;
divider-offset = <0x178>;
divider-width = <0x8>;
divider-shift = <0x0>;
clock-output-names = "sdioclk";
};
qmlclk: qmlclk {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
......@@ -388,6 +437,20 @@ dmaclk: dmaclk@1f27c000 {
reg-names = "csr-reg";
clock-output-names = "dmaclk";
};
i2cclk: i2cclk@17000000 {
status = "disabled";
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
clocks = <&ahbclk 0>;
reg = <0x0 0x17000000 0x0 0x2000>;
reg-names = "csr-reg";
csr-offset = <0xc>;
csr-mask = <0x4>;
enable-offset = <0x10>;
enable-mask = <0x4>;
clock-output-names = "i2cclk";
};
};
msi: msi@79000000 {
......@@ -686,6 +749,50 @@ serial3: serial@1c023000 {
interrupts = <0x0 0x4f 0x4>;
};
mmc0: mmc@1c000000 {
compatible = "arasan,sdhci-4.9a";
reg = <0x0 0x1c000000 0x0 0x100>;
interrupts = <0x0 0x49 0x4>;
dma-coherent;
no-1-8-v;
clock-names = "clk_xin", "clk_ahb";
clocks = <&sdioclk 0>, <&ahbclk 0>;
};
gfcgpio: gfcgpio0@1701c000 {
compatible = "apm,xgene-gpio";
reg = <0x0 0x1701c000 0x0 0x40>;
gpio-controller;
#gpio-cells = <2>;
};
dwgpio: dwgpio@1c024000 {
compatible = "snps,dw-apb-gpio";
reg = <0x0 0x1c024000 0x0 0x1000>;
reg-io-width = <4>;
#address-cells = <1>;
#size-cells = <0>;
porta: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
snps,nr-gpios = <32>;
reg = <0>;
};
};
i2c0: i2c0@10512000 {
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0x0 0x10512000 0x0 0x1000>;
interrupts = <0 0x44 0x4>;
#clock-cells = <1>;
clocks = <&i2cclk 0>;
bus_num = <0>;
};
phy1: phy@1f21a000 {
compatible = "apm,xgene-phy";
reg = <0x0 0x1f21a000 0x0 0x100>;
......@@ -760,6 +867,25 @@ sata3: sata@1a800000 {
phy-names = "sata-phy";
};
/* Do not change dwusb name, coded for backward compatibility */
usb0: dwusb@19000000 {
status = "disabled";
compatible = "snps,dwc3";
reg = <0x0 0x19000000 0x0 0x100000>;
interrupts = <0x0 0x89 0x4>;
dma-coherent;
dr_mode = "host";
};
usb1: dwusb@19800000 {
status = "disabled";
compatible = "snps,dwc3";
reg = <0x0 0x19800000 0x0 0x100000>;
interrupts = <0x0 0x8a 0x4>;
dma-coherent;
dr_mode = "host";
};
sbgpio: sbgpio@17001000{
compatible = "apm,xgene-gpio-sb";
reg = <0x0 0x17001000 0x0 0x400>;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7