Commit 4708b01a authored by AngeloGioacchino Del Regno's avatar AngeloGioacchino Del Regno Committed by Chun-Kuang Hu

drm/mediatek: gamma: Support multi-bank gamma LUT

Newer Gamma IP have got multiple LUT banks: support specifying the
size of the LUT banks and handle bank-switching before programming
the LUT in mtk_gamma_set_common() in preparation for adding support
for MT8195 and newer SoCs.
Suggested-by: default avatarJason-JH.Lin <jason-jh.lin@mediatek.com>
[Angelo: Refactored original commit]
Reviewed-by: default avatarAlexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: default avatarCK Hu <ck.hu@mediatek.com>
Signed-off-by: default avatarAngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231012095736.100784-10-angelogioacchino.delregno@collabora.com/Signed-off-by: default avatarChun-Kuang Hu <chunkuang.hu@kernel.org>
parent a6b39cd2
......@@ -17,10 +17,17 @@
#define DISP_AAL_EN 0x0000
#define AAL_EN BIT(0)
#define DISP_AAL_CFG 0x0020
#define AAL_GAMMA_LUT_EN BIT(1)
#define DISP_AAL_SIZE 0x0030
#define DISP_AAL_SIZE_HSIZE GENMASK(28, 16)
#define DISP_AAL_SIZE_VSIZE GENMASK(12, 0)
#define DISP_AAL_OUTPUT_SIZE 0x04d8
#define DISP_AAL_GAMMA_LUT 0x0700
#define DISP_AAL_GAMMA_LUT_R GENMASK(29, 20)
#define DISP_AAL_GAMMA_LUT_G GENMASK(19, 10)
#define DISP_AAL_GAMMA_LUT_B GENMASK(9, 0)
#define DISP_AAL_LUT_BITS 10
#define DISP_AAL_LUT_SIZE 512
struct mtk_disp_aal_data {
......@@ -80,9 +87,39 @@ unsigned int mtk_aal_gamma_get_lut_size(struct device *dev)
void mtk_aal_gamma_set(struct device *dev, struct drm_crtc_state *state)
{
struct mtk_disp_aal *aal = dev_get_drvdata(dev);
struct drm_color_lut *lut;
unsigned int i;
u32 cfg_val;
/* If gamma is not supported in AAL, go out immediately */
if (!(aal->data && aal->data->has_gamma))
return;
/* Also, if there's no gamma lut there's nothing to do here. */
if (!state->gamma_lut)
return;
lut = (struct drm_color_lut *)state->gamma_lut->data;
for (i = 0; i < DISP_AAL_LUT_SIZE; i++) {
struct drm_color_lut hwlut = {
.red = drm_color_lut_extract(lut[i].red, DISP_AAL_LUT_BITS),
.green = drm_color_lut_extract(lut[i].green, DISP_AAL_LUT_BITS),
.blue = drm_color_lut_extract(lut[i].blue, DISP_AAL_LUT_BITS)
};
u32 word;
word = FIELD_PREP(DISP_AAL_GAMMA_LUT_R, hwlut.red);
word |= FIELD_PREP(DISP_AAL_GAMMA_LUT_G, hwlut.green);
word |= FIELD_PREP(DISP_AAL_GAMMA_LUT_B, hwlut.blue);
writel(word, aal->regs + DISP_AAL_GAMMA_LUT + i * 4);
}
if (aal->data && aal->data->has_gamma)
mtk_gamma_set_common(NULL, aal->regs, state);
cfg_val = readl(aal->regs + DISP_AAL_CFG);
/* Enable the gamma table */
cfg_val |= FIELD_PREP(AAL_GAMMA_LUT_EN, 1);
writel(cfg_val, aal->regs + DISP_AAL_CFG);
}
void mtk_aal_start(struct device *dev)
......
......@@ -58,7 +58,6 @@ void mtk_gamma_config(struct device *dev, unsigned int w,
unsigned int bpc, struct cmdq_pkt *cmdq_pkt);
unsigned int mtk_gamma_get_lut_size(struct device *dev);
void mtk_gamma_set(struct device *dev, struct drm_crtc_state *state);
void mtk_gamma_set_common(struct device *dev, void __iomem *regs, struct drm_crtc_state *state);
void mtk_gamma_start(struct device *dev);
void mtk_gamma_stop(struct device *dev);
......
......@@ -24,6 +24,8 @@
#define DISP_GAMMA_SIZE 0x0030
#define DISP_GAMMA_SIZE_HSIZE GENMASK(28, 16)
#define DISP_GAMMA_SIZE_VSIZE GENMASK(12, 0)
#define DISP_GAMMA_BANK 0x0100
#define DISP_GAMMA_BANK_BANK GENMASK(1, 0)
#define DISP_GAMMA_LUT 0x0700
#define DISP_GAMMA_LUT_10BIT_R GENMASK(29, 20)
......@@ -33,6 +35,7 @@
struct mtk_disp_gamma_data {
bool has_dither;
bool lut_diff;
u16 lut_bank_size;
u16 lut_size;
};
......@@ -75,33 +78,45 @@ void mtk_gamma_set(struct device *dev, struct drm_crtc_state *state)
unsigned int i;
struct drm_color_lut *lut;
void __iomem *lut_base;
u32 cfg_val, word;
u32 cfg_val, lbank_val, word;
int cur_bank, num_lut_banks;
/* If there's no gamma lut there's nothing to do here. */
if (!state->gamma_lut)
return;
num_lut_banks = gamma->data->lut_size / gamma->data->lut_bank_size;
lut_base = gamma->regs + DISP_GAMMA_LUT;
lut = (struct drm_color_lut *)state->gamma_lut->data;
for (i = 0; i < gamma->data->lut_size; i++) {
for (cur_bank = 0; cur_bank < num_lut_banks; cur_bank++) {
/* Switch gamma bank and set data mode before writing LUT */
if (num_lut_banks > 1) {
lbank_val = FIELD_PREP(DISP_GAMMA_BANK_BANK, cur_bank);
writel(lbank_val, gamma->regs + DISP_GAMMA_BANK);
}
for (i = 0; i < gamma->data->lut_bank_size; i++) {
int n = cur_bank * gamma->data->lut_bank_size + i;
struct drm_color_lut diff, hwlut;
hwlut.red = drm_color_lut_extract(lut[i].red, 10);
hwlut.green = drm_color_lut_extract(lut[i].green, 10);
hwlut.blue = drm_color_lut_extract(lut[i].blue, 10);
hwlut.red = drm_color_lut_extract(lut[n].red, 10);
hwlut.green = drm_color_lut_extract(lut[n].green, 10);
hwlut.blue = drm_color_lut_extract(lut[n].blue, 10);
if (!gamma->data->lut_diff || (i % 2 == 0)) {
word = FIELD_PREP(DISP_GAMMA_LUT_10BIT_R, hwlut.red);
word |= FIELD_PREP(DISP_GAMMA_LUT_10BIT_G, hwlut.green);
word |= FIELD_PREP(DISP_GAMMA_LUT_10BIT_B, hwlut.blue);
} else {
diff.red = lut[i].red - lut[i - 1].red;
diff.red = lut[n].red - lut[n - 1].red;
diff.red = drm_color_lut_extract(diff.red, 10);
diff.green = lut[i].green - lut[i - 1].green;
diff.green = lut[n].green - lut[n - 1].green;
diff.green = drm_color_lut_extract(diff.green, 10);
diff.blue = lut[i].blue - lut[i - 1].blue;
diff.blue = lut[n].blue - lut[n - 1].blue;
diff.blue = drm_color_lut_extract(diff.blue, 10);
word = FIELD_PREP(DISP_GAMMA_LUT_10BIT_R, diff.red);
......@@ -110,6 +125,7 @@ void mtk_gamma_set(struct device *dev, struct drm_crtc_state *state)
}
writel(word, lut_base + i * 4);
}
}
cfg_val = readl(gamma->regs + DISP_GAMMA_CFG);
......@@ -212,10 +228,12 @@ static void mtk_disp_gamma_remove(struct platform_device *pdev)
static const struct mtk_disp_gamma_data mt8173_gamma_driver_data = {
.has_dither = true,
.lut_bank_size = 512,
.lut_size = 512,
};
static const struct mtk_disp_gamma_data mt8183_gamma_driver_data = {
.lut_bank_size = 512,
.lut_diff = true,
.lut_size = 512,
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment