Commit 4721ab85 authored by Heiko Stübner's avatar Heiko Stübner Committed by Heiko Stuebner

ARM: dts: rockchip: add hym8563 rtc to Radxa Rock board

The Radxa Rock uses a hym8563 as rtc. Add the i2c device and necessary
pinconfig for the interrupt pin - labeled rtc_int in the schematics.
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent 0541f94f
...@@ -80,6 +80,17 @@ &i2c1 { ...@@ -80,6 +80,17 @@ &i2c1 {
status = "okay"; status = "okay";
clock-frequency = <400000>; clock-frequency = <400000>;
rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
interrupt-parent = <&gpio0>;
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&rtc_int>;
#clock-cells = <0>;
clock-output-names = "xin32k";
};
act8846: act8846@5a { act8846: act8846@5a {
compatible = "active-semi,act8846"; compatible = "active-semi,act8846";
reg = <0x5a>; reg = <0x5a>;
...@@ -196,6 +207,12 @@ act8846_dvs0_ctl: act8846-dvs0-ctl { ...@@ -196,6 +207,12 @@ act8846_dvs0_ctl: act8846-dvs0-ctl {
}; };
}; };
hym8563 {
rtc_int: rtc-int {
rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
ir-receiver { ir-receiver {
ir_recv_pin: ir-recv-pin { ir_recv_pin: ir-recv-pin {
rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO &pcfg_pull_none>; rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO &pcfg_pull_none>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment