Commit 472800a0 authored by Dmytro Laktyushkin's avatar Dmytro Laktyushkin Committed by Alex Deucher

drm/amd/display: clean up dccg divider calc and dcn constructor

No functional change.
Signed-off-by: default avatarDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: default avatarTony Cheng <Tony.Cheng@amd.com>
Acked-by: default avatarHarry Wentland <harry.wentland@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent 12c3130d
......@@ -101,90 +101,42 @@ static const struct state_dependent_clocks dce120_max_clks_by_state[] = {
/*ClocksStatePerformance*/
{ .display_clk_khz = 1133000, .pixel_clk_khz = 600000 } };
/* Starting point for each divider range.*/
enum dce_divider_range_start {
DIVIDER_RANGE_01_START = 200, /* 2.00*/
DIVIDER_RANGE_02_START = 1600, /* 16.00*/
DIVIDER_RANGE_03_START = 3200, /* 32.00*/
DIVIDER_RANGE_SCALE_FACTOR = 100 /* Results are scaled up by 100.*/
/* Starting DID for each range */
enum dentist_base_divider_id {
dentist_base_divider_id_1 = 0x08,
dentist_base_divider_id_2 = 0x40,
dentist_base_divider_id_3 = 0x60,
dentist_max_divider_id = 0x80
};
/* Ranges for divider identifiers (Divider ID or DID)
mmDENTIST_DISPCLK_CNTL.DENTIST_DISPCLK_WDIVIDER*/
enum dce_divider_id_register_setting {
DIVIDER_RANGE_01_BASE_DIVIDER_ID = 0X08,
DIVIDER_RANGE_02_BASE_DIVIDER_ID = 0X40,
DIVIDER_RANGE_03_BASE_DIVIDER_ID = 0X60,
DIVIDER_RANGE_MAX_DIVIDER_ID = 0X80
/* Starting point and step size for each divider range.*/
enum dentist_divider_range {
dentist_divider_range_1_start = 8, /* 2.00 */
dentist_divider_range_1_step = 1, /* 0.25 */
dentist_divider_range_2_start = 64, /* 16.00 */
dentist_divider_range_2_step = 2, /* 0.50 */
dentist_divider_range_3_start = 128, /* 32.00 */
dentist_divider_range_3_step = 4, /* 1.00 */
dentist_divider_range_scale_factor = 4
};
/* Step size between each divider within a range.
Incrementing the DENTIST_DISPCLK_WDIVIDER by one
will increment the divider by this much.*/
enum dce_divider_range_step_size {
DIVIDER_RANGE_01_STEP_SIZE = 25, /* 0.25*/
DIVIDER_RANGE_02_STEP_SIZE = 50, /* 0.50*/
DIVIDER_RANGE_03_STEP_SIZE = 100 /* 1.00 */
};
static bool dce_divider_range_construct(
struct dce_divider_range *div_range,
int range_start,
int range_step,
int did_min,
int did_max)
static int dentist_get_divider_from_did(int did)
{
div_range->div_range_start = range_start;
div_range->div_range_step = range_step;
div_range->did_min = did_min;
div_range->did_max = did_max;
if (div_range->div_range_step == 0) {
div_range->div_range_step = 1;
/*div_range_step cannot be zero*/
BREAK_TO_DEBUGGER();
}
/* Calculate this based on the other inputs.*/
/* See DividerRange.h for explanation of */
/* the relationship between divider id (DID) and a divider.*/
/* Number of Divider IDs = (Maximum Divider ID - Minimum Divider ID)*/
/* Maximum divider identified in this range =
* (Number of Divider IDs)*Step size between dividers
* + The start of this range.*/
div_range->div_range_end = (did_max - did_min) * range_step
+ range_start;
return true;
}
static int dce_divider_range_calc_divider(
struct dce_divider_range *div_range,
int did)
{
/* Is this DID within our range?*/
if ((did < div_range->did_min) || (did >= div_range->did_max))
return INVALID_DIVIDER;
return ((did - div_range->did_min) * div_range->div_range_step)
+ div_range->div_range_start;
}
static int dce_divider_range_get_divider(
struct dce_divider_range *div_range,
int ranges_num,
int did)
{
int div = INVALID_DIVIDER;
int i;
for (i = 0; i < ranges_num; i++) {
/* Calculate divider with given divider ID*/
div = dce_divider_range_calc_divider(&div_range[i], did);
/* Found a valid return divider*/
if (div != INVALID_DIVIDER)
break;
if (did < dentist_base_divider_id_1)
did = dentist_base_divider_id_1;
if (did > dentist_max_divider_id)
did = dentist_max_divider_id;
if (did < dentist_base_divider_id_2) {
return dentist_divider_range_1_start + dentist_divider_range_1_step
* (did - dentist_base_divider_id_1);
} else if (did < dentist_base_divider_id_3) {
return dentist_divider_range_2_start + dentist_divider_range_2_step
* (did - dentist_base_divider_id_2);
} else {
return dentist_divider_range_3_start + dentist_divider_range_3_step
* (did - dentist_base_divider_id_3);
}
return div;
}
static int dce_clocks_get_dp_ref_freq(struct dccg *clk)
......@@ -193,7 +145,7 @@ static int dce_clocks_get_dp_ref_freq(struct dccg *clk)
int dprefclk_wdivider;
int dprefclk_src_sel;
int dp_ref_clk_khz = 600000;
int target_div = INVALID_DIVIDER;
int target_div;
/* ASSERT DP Reference Clock source is from DFS*/
REG_GET(DPREFCLK_CNTL, DPREFCLK_SRC_SEL, &dprefclk_src_sel);
......@@ -204,16 +156,11 @@ static int dce_clocks_get_dp_ref_freq(struct dccg *clk)
REG_GET(DENTIST_DISPCLK_CNTL, DENTIST_DPREFCLK_WDIVIDER, &dprefclk_wdivider);
/* Convert DENTIST_DPREFCLK_WDIVIDERto actual divider*/
target_div = dce_divider_range_get_divider(
clk_dce->divider_ranges,
DIVIDER_RANGE_MAX,
dprefclk_wdivider);
target_div = dentist_get_divider_from_did(dprefclk_wdivider);
if (target_div != INVALID_DIVIDER) {
/* Calculate the current DFS clock, in kHz.*/
dp_ref_clk_khz = (DIVIDER_RANGE_SCALE_FACTOR
dp_ref_clk_khz = (dentist_divider_range_scale_factor
* clk_dce->dentist_vco_freq_khz) / target_div;
}
/* SW will adjust DP REF Clock average value for all purposes
* (DP DTO / DP Audio DTO and DP GTC)
......@@ -229,17 +176,12 @@ static int dce_clocks_get_dp_ref_freq(struct dccg *clk)
*/
if (clk_dce->ss_on_dprefclk && clk_dce->dprefclk_ss_divider != 0) {
struct fixed31_32 ss_percentage = dc_fixpt_div_int(
dc_fixpt_from_fraction(
clk_dce->dprefclk_ss_percentage,
dc_fixpt_from_fraction(clk_dce->dprefclk_ss_percentage,
clk_dce->dprefclk_ss_divider), 200);
struct fixed31_32 adj_dp_ref_clk_khz;
ss_percentage = dc_fixpt_sub(dc_fixpt_one,
ss_percentage);
adj_dp_ref_clk_khz =
dc_fixpt_mul_int(
ss_percentage,
dp_ref_clk_khz);
ss_percentage = dc_fixpt_sub(dc_fixpt_one, ss_percentage);
adj_dp_ref_clk_khz = dc_fixpt_mul_int(ss_percentage, dp_ref_clk_khz);
dp_ref_clk_khz = dc_fixpt_floor(adj_dp_ref_clk_khz);
}
......@@ -257,17 +199,12 @@ static int dce_clocks_get_dp_ref_freq_wrkaround(struct dccg *clk)
if (clk_dce->ss_on_dprefclk && clk_dce->dprefclk_ss_divider != 0) {
struct fixed31_32 ss_percentage = dc_fixpt_div_int(
dc_fixpt_from_fraction(
clk_dce->dprefclk_ss_percentage,
dc_fixpt_from_fraction(clk_dce->dprefclk_ss_percentage,
clk_dce->dprefclk_ss_divider), 200);
struct fixed31_32 adj_dp_ref_clk_khz;
ss_percentage = dc_fixpt_sub(dc_fixpt_one,
ss_percentage);
adj_dp_ref_clk_khz =
dc_fixpt_mul_int(
ss_percentage,
dp_ref_clk_khz);
ss_percentage = dc_fixpt_sub(dc_fixpt_one, ss_percentage);
adj_dp_ref_clk_khz = dc_fixpt_mul_int(ss_percentage, dp_ref_clk_khz);
dp_ref_clk_khz = dc_fixpt_floor(adj_dp_ref_clk_khz);
}
......@@ -804,25 +741,6 @@ static void dce_dccg_construct(
dce_clock_read_integrated_info(clk_dce);
dce_clock_read_ss_info(clk_dce);
dce_divider_range_construct(
&clk_dce->divider_ranges[DIVIDER_RANGE_01],
DIVIDER_RANGE_01_START,
DIVIDER_RANGE_01_STEP_SIZE,
DIVIDER_RANGE_01_BASE_DIVIDER_ID,
DIVIDER_RANGE_02_BASE_DIVIDER_ID);
dce_divider_range_construct(
&clk_dce->divider_ranges[DIVIDER_RANGE_02],
DIVIDER_RANGE_02_START,
DIVIDER_RANGE_02_STEP_SIZE,
DIVIDER_RANGE_02_BASE_DIVIDER_ID,
DIVIDER_RANGE_03_BASE_DIVIDER_ID);
dce_divider_range_construct(
&clk_dce->divider_ranges[DIVIDER_RANGE_03],
DIVIDER_RANGE_03_START,
DIVIDER_RANGE_03_STEP_SIZE,
DIVIDER_RANGE_03_BASE_DIVIDER_ID,
DIVIDER_RANGE_MAX_DIVIDER_ID);
}
struct dccg *dce_dccg_create(
......@@ -921,6 +839,9 @@ struct dccg *dce120_dccg_create(struct dc_context *ctx)
struct dccg *dcn1_dccg_create(struct dc_context *ctx)
{
struct dc_debug *debug = &ctx->dc->debug;
struct dc_bios *bp = ctx->dc_bios;
struct dc_firmware_info fw_info = { { 0 } };
struct dce_dccg *clk_dce = kzalloc(sizeof(*clk_dce), GFP_KERNEL);
if (clk_dce == NULL) {
......@@ -928,12 +849,30 @@ struct dccg *dcn1_dccg_create(struct dc_context *ctx)
return NULL;
}
/* TODO strip out useful stuff out of dce constructor */
dce_dccg_construct(
clk_dce, ctx, NULL, NULL, NULL);
clk_dce->base.ctx = ctx;
clk_dce->base.funcs = &dcn1_funcs;
clk_dce->dfs_bypass_disp_clk = 0;
clk_dce->dprefclk_ss_percentage = 0;
clk_dce->dprefclk_ss_divider = 1000;
clk_dce->ss_on_dprefclk = false;
if (bp->integrated_info)
clk_dce->dentist_vco_freq_khz = bp->integrated_info->dentist_vco_freq;
if (clk_dce->dentist_vco_freq_khz == 0) {
bp->funcs->get_firmware_info(bp, &fw_info);
clk_dce->dentist_vco_freq_khz = fw_info.smu_gpu_pll_output_freq;
if (clk_dce->dentist_vco_freq_khz == 0)
clk_dce->dentist_vco_freq_khz = 3600000;
}
if (!debug->disable_dfs_bypass && bp->integrated_info)
if (bp->integrated_info->gpu_cap_info & DFS_BYPASS_ENABLE)
clk_dce->dfs_bypass_enabled = true;
dce_clock_read_ss_info(clk_dce);
return &clk_dce->base;
}
......
......@@ -57,31 +57,6 @@ struct dce_disp_clk_registers {
uint32_t DENTIST_DISPCLK_CNTL;
};
/* Array identifiers and count for the divider ranges.*/
enum dce_divider_range_count {
DIVIDER_RANGE_01 = 0,
DIVIDER_RANGE_02,
DIVIDER_RANGE_03,
DIVIDER_RANGE_MAX /* == 3*/
};
enum dce_divider_error_types {
INVALID_DID = 0,
INVALID_DIVIDER = 1
};
struct dce_divider_range {
int div_range_start;
/* The end of this range of dividers.*/
int div_range_end;
/* The distance between each divider in this range.*/
int div_range_step;
/* The divider id for the lowest divider.*/
int did_min;
/* The divider id for the highest divider.*/
int did_max;
};
struct dce_dccg {
struct dccg base;
const struct dce_disp_clk_registers *regs;
......@@ -89,7 +64,6 @@ struct dce_dccg {
const struct dce_disp_clk_mask *clk_mask;
struct state_dependent_clocks max_clks_by_state[DM_PP_CLOCKS_MAX_STATES];
struct dce_divider_range divider_ranges[DIVIDER_RANGE_MAX];
int dentist_vco_freq_khz;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment