Commit 477099f1 authored by Uwe Kleine-König's avatar Uwe Kleine-König Committed by Sekhar Nori

ARM: davinci: implement DEBUG_LL port choice

Apart from the necessity to do this change for multi-platform kernels
the previous logic depended on the zImage decompressor to write the
physical and virtual address to a magic memory location.
If the decompressor is unused or not correctly configured for the
current machid, the addruart macro was an infinite loop. Moreover
debugging the early zImage code was not possible either.
Signed-off-by: default avatarUwe Kleine-König <u.kleine-koenig@pengutronix.de>
[nsekhar@ti.com: add braces in _DEBUG_LL_ENTRY() macro to fix checkpatch
error. Fix debug port choice config dependency for traditional DaVincis.
Modify debug port config names and add help text.]
Signed-off-by: default avatarSekhar Nori <nsekhar@ti.com>
parent d48b97b4
......@@ -103,6 +103,35 @@ choice
Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices.
config DEBUG_DAVINCI_DA8XX_UART1
bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
depends on ARCH_DAVINCI_DA8XX
help
Say Y here if you want the debug print routines to direct
their output to UART1 serial port on DaVinci DA8XX devices.
config DEBUG_DAVINCI_DA8XX_UART2
bool "Kernel low-level debugging on DaVinci DA8XX using UART2"
depends on ARCH_DAVINCI_DA8XX
help
Say Y here if you want the debug print routines to direct
their output to UART2 serial port on DaVinci DA8XX devices.
config DEBUG_DAVINCI_DMx_UART0
bool "Kernel low-level debugging on DaVinci DMx using UART0"
depends on ARCH_DAVINCI_DMx
help
Say Y here if you want the debug print routines to direct
their output to UART0 serial port on DaVinci DMx devices.
config DEBUG_DAVINCI_TNETV107X_UART1
bool "Kernel low-level debugging on DaVinci TNETV107x using UART1"
depends on ARCH_DAVINCI_TNETV107X
help
Say Y here if you want the debug print routines to direct
their output to UART1 serial port on DaVinci TNETV107X
devices.
config DEBUG_DC21285_PORT
bool "Kernel low-level debugging messages via footbridge serial port"
depends on FOOTBRIDGE
......
......@@ -22,46 +22,28 @@
#define UART_SHIFT 2
.pushsection .data
davinci_uart_phys: .word 0
davinci_uart_virt: .word 0
.popsection
.macro addruart, rp, rv, tmp
/* Use davinci_uart_phys/virt if already configured */
10: adr \rp, 99f @ get effective addr of 99f
ldr \rv, [\rp] @ get absolute addr of 99f
sub \rv, \rv, \rp @ offset between the two
ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys
sub \tmp, \rp, \rv @ make it effective
ldr \rp, [\tmp, #0] @ davinci_uart_phys
ldr \rv, [\tmp, #4] @ davinci_uart_virt
cmp \rp, #0 @ is port configured?
cmpne \rv, #0
bne 100f @ already configured
/* Check the debug UART address set in uncompress.h */
and \rp, pc, #0xff000000
ldr \rv, =DAVINCI_UART_INFO_OFS
add \rp, \rp, \rv
/* Copy uart phys address from decompressor uart info */
ldr \rv, [\rp, #0]
str \rv, [\tmp, #0]
/* Copy uart virt address from decompressor uart info */
ldr \rv, [\rp, #4]
str \rv, [\tmp, #4]
b 10b
#if defined(CONFIG_DEBUG_DAVINCI_DMx_UART0)
#define UART_BASE DAVINCI_UART0_BASE
#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART0)
#define UART_BASE DA8XX_UART0_BASE
#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART1)
#define UART_BASE DA8XX_UART1_BASE
#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART2)
#define UART_BASE DA8XX_UART2_BASE
#elif defined(CONFIG_DEBUG_DAVINCI_TNETV107X_UART1)
#define UART_BASE TNETV107X_UART2_BASE
#define UART_VIRTBASE TNETV107X_UART2_VIRT
#else
#error "Select a specifc port for DEBUG_LL"
#endif
.align
99: .word .
.word davinci_uart_phys
.ltorg
#ifndef UART_VIRTBASE
#define UART_VIRTBASE IO_ADDRESS(UART_BASE)
#endif
100:
.macro addruart, rp, rv, tmp
ldr \rp, =UART_BASE
ldr \rv, =UART_VIRTBASE
.endm
.macro senduart,rd,rx
......
......@@ -22,7 +22,7 @@
/*
* I/O mapping
*/
#define IO_PHYS 0x01c00000UL
#define IO_PHYS UL(0x01c00000)
#define IO_OFFSET 0xfd000000 /* Virtual IO = 0xfec00000 */
#define IO_SIZE 0x00400000
#define IO_VIRT (IO_PHYS + IO_OFFSET)
......
......@@ -15,16 +15,6 @@
#include <mach/hardware.h>
/*
* Stolen area that contains debug uart physical and virtual addresses. These
* addresses are filled in by the uncompress.h code, and are used by the debug
* macros in debug-macro.S.
*
* This area sits just below the page tables (see arch/arm/kernel/head.S).
* We define it as a relative offset from start of usable RAM.
*/
#define DAVINCI_UART_INFO_OFS 0x3ff8
#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
......
......@@ -43,37 +43,27 @@ static inline void flush(void)
barrier();
}
static inline void set_uart_info(u32 phys, void * __iomem virt)
static inline void set_uart_info(u32 phys)
{
/*
* Get address of some.bss variable and round it down
* a la CONFIG_AUTO_ZRELADDR.
*/
u32 ram_start = (u32)&uart & 0xf8000000;
u32 *uart_info = (u32 *)(ram_start + DAVINCI_UART_INFO_OFS);
uart = (u32 *)phys;
uart_info[0] = phys;
uart_info[1] = (u32)virt;
}
#define _DEBUG_LL_ENTRY(machine, phys, virt) \
#define _DEBUG_LL_ENTRY(machine, phys) \
{ \
if (machine_is_##machine()) { \
set_uart_info(phys, virt); \
set_uart_info(phys); \
break; \
} \
}
#define DEBUG_LL_DAVINCI(machine, port) \
_DEBUG_LL_ENTRY(machine, DAVINCI_UART##port##_BASE, \
IO_ADDRESS(DAVINCI_UART##port##_BASE))
_DEBUG_LL_ENTRY(machine, DAVINCI_UART##port##_BASE)
#define DEBUG_LL_DA8XX(machine, port) \
_DEBUG_LL_ENTRY(machine, DA8XX_UART##port##_BASE, \
IO_ADDRESS(DA8XX_UART##port##_BASE))
_DEBUG_LL_ENTRY(machine, DA8XX_UART##port##_BASE)
#define DEBUG_LL_TNETV107X(machine, port) \
_DEBUG_LL_ENTRY(machine, TNETV107X_UART##port##_BASE, \
TNETV107X_UART##port##_VIRT)
_DEBUG_LL_ENTRY(machine, TNETV107X_UART##port##_BASE)
static inline void __arch_decomp_setup(unsigned long arch_id)
{
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment