Merge tag 'hwmon-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - New driver for AXI fan control

 - Attenuator bypass support and support for inverting pwm output in
   adt7475 driver

 - Support for new power supply version in ibm-cffps driver

 - PMBus drivers:

     * support for multi-phase chips

     * ltc2978 driver: add support for LTC2972, LTC2979, LTC3884,
       LTC3889, LTC7880, LTM4664, LTM4677, LTM4678, LTM4680, and
       LTM4700/

     * tps53679 driver: add support for TPS53681, TPS53647, and TPS53667

     * isl68137 driver: support for various 2nd Gen Renesas digital
       multiphase chips added to isl68137 driver

 - Minor improvements and fixes in nct7904, ibmpowernv, lm73, ibmaem,
   and k10temp drivers

* tag 'hwmon-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (29 commits)
  docs: hwmon: Update documentation for isl68137 pmbus driver
  hwmon: (pmbus) add support for 2nd Gen Renesas digital multiphase
  hwmon: (pmbus/ibm-cffps) Add another PSU CCIN to version detection
  hwmon: (nct7904) Fix the incorrect quantity for fan & temp attributes
  hwmon: (ibmpowernv) Use scnprintf() for avoiding potential buffer overflow
  hwmon: (adt7475) Add support for inverting pwm output
  hwmon: (adt7475) Add attenuator bypass support
  dt-bindings: hwmon: Document adt7475 pwm-active-state property
  dt-bindings: hwmon: Document adt7475 bypass-attenuator property
  dt-bindings: hwmon: Document adt7475 binding
  hwmon: (lm73) Add support for of_match_table
  dt-bindings: Add TI LM73 as a trivial device
  hwmon: (pmbus/tps53679) Add documentation
  hwmon: (pmbus/tps53679) Add support for TPS53647 and TPS53667
  hwmon: (pmbus/tps53679) Add support for TPS53681
  hwmon: (pmbus/tps53679) Add support for IIN and PIN to TPS53679 and TPS53688
  hwmon: (pmbus/tps53679) Add support for multiple chips IDs
  hwmon: (pmbus) Implement multi-phase support
  hwmon: (pmbus) Add 'phase' parameter where needed for multi-phase support
  hwmon: (pmbus) Add IC_DEVICE_ID and IC_DEVICE_REV command definitions
  ...

Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2019 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/hwmon/adi,axi-fan-control.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AXI FAN Control Device Tree Bindings
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |+
+  Bindings for the Analog Devices AXI FAN Control driver. Spefications of the
+  core can be found in:
+
+  https://wiki.analog.com/resources/fpga/docs/axi_fan_control
+
+properties:
+  compatible:
+    enum:
+        - adi,axi-fan-control-1.00.a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  pulses-per-revolution:
+    description:
+      Value specifying the number of pulses per revolution of the controlled
+      FAN.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - pulses-per-revolution
+
+examples:
+  - |
+    fpga_axi: fpga-axi@0 {
+            #address-cells = <0x2>;
+            #size-cells = <0x1>;
+
+            axi_fan_control: axi-fan-control@80000000 {
+                    compatible = "adi,axi-fan-control-1.00.a";
+                    reg = <0x0 0x80000000 0x10000>;
+                    clocks = <&clk 71>;
+                    interrupts = <0 110 0>;
+                    pulses-per-revolution = <2>;
+            };
+    };
+...

Documentation/devicetree/bindings/hwmon/adt7475.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/adt7475.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADT7475 hwmon sensor
+
+maintainers:
+  - Jean Delvare <jdelvare@suse.com>
+
+description: |
+  The ADT7473, ADT7475, ADT7476, and ADT7490 are thermal monitors and multiple
+  PWN fan controllers.
+
+  They support monitoring and controlling up to four fans (the ADT7490 can only
+  control up to three). They support reading a single on chip temperature
+  sensor and two off chip temperature sensors (the ADT7490 additionally
+  supports measuring up to three current external temperature sensors with
+  series resistance cancellation (SRC)).
+
+  Datasheets:
+  https://www.onsemi.com/pub/Collateral/ADT7473-D.PDF
+  https://www.onsemi.com/pub/Collateral/ADT7475-D.PDF
+  https://www.onsemi.com/pub/Collateral/ADT7476-D.PDF
+  https://www.onsemi.com/pub/Collateral/ADT7490-D.PDF
+
+  Description taken from onsemiconductors specification sheets, with minor
+  rephrasing.
+
+properties:
+  compatible:
+    enum:
+      - adi,adt7473
+      - adi,adt7475
+      - adi,adt7476
+      - adi,adt7490
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^adi,bypass-attenuator-in[0-4]$":
+    description: |
+      Configures bypassing the individual voltage input attenuator. If
+      set to 1 the attenuator is bypassed if set to 0 the attenuator is
+      not bypassed. If the property is absent then the attenuator
+      retains it's configuration from the bios/bootloader.
+    allOf:
+     - $ref: /schemas/types.yaml#/definitions/uint32
+     - enum: [0, 1]
+
+  "^adi,pwm-active-state$":
+    description: |
+      Integer array, represents the active state of the pwm outputs If set to 0
+      the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm
+      uses a logic high output for 100% duty cycle.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+      - minItems: 3
+        maxItems: 3
+        items:
+          enum: [0, 1]
+          default: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      hwmon@2e {
+        compatible = "adi,adt7476";
+        reg = <0x2e>;
+        adi,bypass-attenuator-in0 = <1>;
+        adi,bypass-attenuator-in1 = <0>;
+        adi,pwm-active-state = <1 0 1>;
+      };
+    };
+

Documentation/devicetree/bindings/hwmon/ltc2978.txt

@@ -2,20 +2,30 @@ ltc2978
 
 Required properties:
 - compatible: should contain one of:
+  * "lltc,ltc2972"
   * "lltc,ltc2974"
   * "lltc,ltc2975"
   * "lltc,ltc2977"
   * "lltc,ltc2978"
+  * "lltc,ltc2979"
   * "lltc,ltc2980"
   * "lltc,ltc3880"
   * "lltc,ltc3882"
   * "lltc,ltc3883"
+  * "lltc,ltc3884"
   * "lltc,ltc3886"
   * "lltc,ltc3887"
+  * "lltc,ltc3889"
+  * "lltc,ltc7880"
   * "lltc,ltm2987"
+  * "lltc,ltm4664"
   * "lltc,ltm4675"
   * "lltc,ltm4676"
+  * "lltc,ltm4677"
+  * "lltc,ltm4678"
+  * "lltc,ltm4680"
   * "lltc,ltm4686"
+  * "lltc,ltm4700"
 - reg: I2C slave address
 
 Optional properties:
@@ -25,13 +35,17 @@ Optional properties:
   standard binding for regulators; see regulator.txt.
 
 Valid names of regulators depend on number of supplies supported per device:
+  * ltc2972 vout0 - vout1
   * ltc2974, ltc2975 : vout0 - vout3
-  * ltc2977, ltc2980, ltm2987 : vout0 - vout7
+  * ltc2977, ltc2979, ltc2980, ltm2987 : vout0 - vout7
   * ltc2978 : vout0 - vout7
-  * ltc3880, ltc3882, ltc3886 : vout0 - vout1
+  * ltc3880, ltc3882, ltc3884, ltc3886, ltc3887, ltc3889 : vout0 - vout1
+  * ltc7880 : vout0 - vout1
   * ltc3883 : vout0
-  * ltm4676 : vout0 - vout1
-  * ltm4686 : vout0 - vout1
+  * ltm4664 : vout0 - vout1
+  * ltm4675, ltm4676, ltm4677, ltm4678 : vout0 - vout1
+  * ltm4680, ltm4686 : vout0 - vout1
+  * ltm4700 : vout0 - vout1
 
 Example:
 ltc2978@5e {

Documentation/devicetree/bindings/trivial-devices.yaml

@@ -34,14 +34,6 @@ properties:
           - adi,adt7461
             # +/-1C TDM Extended Temp Range I.C
           - adt7461
-            # +/-1C TDM Extended Temp Range I.C
-          - adi,adt7473
-            # +/-1C TDM Extended Temp Range I.C
-          - adi,adt7475
-            # +/-1C TDM Extended Temp Range I.C
-          - adi,adt7476
-            # +/-1C TDM Extended Temp Range I.C
-          - adi,adt7490
             # Three-Axis Digital Accelerometer
           - adi,adxl345
             # Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too)
@@ -350,6 +342,8 @@ properties:
           - ti,ads7830
             # Temperature Monitoring and Fan Control
           - ti,amc6821
+            # Temperature sensor with 2-wire interface
+          - ti,lm73
             # Temperature sensor with integrated fan control
           - ti,lm96000
             # I2C Touch-Screen Controller

Documentation/hwmon/index.rst

@@ -162,6 +162,7 @@ Hardware Monitoring Kernel Drivers
    tmp421
    tmp513
    tps40422
+   tps53679
    twl4030-madc-hwmon
    ucd9000
    ucd9200

Documentation/hwmon/isl68137.rst

@@ -3,7 +3,7 @@ Kernel driver isl68137
 
 Supported chips:
 
-  * Intersil ISL68137
+  * Renesas ISL68137
 
     Prefix: 'isl68137'
 
@@ -11,19 +11,405 @@ Supported chips:
 
     Datasheet:
 
-      Publicly available at the Intersil website
-      https://www.intersil.com/content/dam/Intersil/documents/isl6/isl68137.pdf
+      Publicly available at the Renesas website
+      https://www.renesas.com/us/en/www/doc/datasheet/isl68137.pdf
+
+  * Renesas ISL68220
+
+    Prefix: 'raa_dmpvr2_2rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL68221
+
+    Prefix: 'raa_dmpvr2_3rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL68222
+
+    Prefix: 'raa_dmpvr2_2rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL68223
+
+    Prefix: 'raa_dmpvr2_2rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL68224
+
+    Prefix: 'raa_dmpvr2_3rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL68225
+
+    Prefix: 'raa_dmpvr2_2rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL68226
+
+    Prefix: 'raa_dmpvr2_3rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL68227
+
+    Prefix: 'raa_dmpvr2_1rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL68229
+
+    Prefix: 'raa_dmpvr2_3rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL68233
+
+    Prefix: 'raa_dmpvr2_2rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL68239
+
+    Prefix: 'raa_dmpvr2_3rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL69222
+
+    Prefix: 'raa_dmpvr2_2rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL69223
+
+    Prefix: 'raa_dmpvr2_3rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL69224
+
+    Prefix: 'raa_dmpvr2_2rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL69225
+
+    Prefix: 'raa_dmpvr2_2rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL69227
+
+    Prefix: 'raa_dmpvr2_3rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL69228
+
+    Prefix: 'raa_dmpvr2_3rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL69234
+
+    Prefix: 'raa_dmpvr2_2rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL69236
+
+    Prefix: 'raa_dmpvr2_2rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL69239
+
+    Prefix: 'raa_dmpvr2_3rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL69242
+
+    Prefix: 'raa_dmpvr2_2rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL69243
+
+    Prefix: 'raa_dmpvr2_1rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL69247
+
+    Prefix: 'raa_dmpvr2_2rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL69248
+
+    Prefix: 'raa_dmpvr2_2rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL69254
+
+    Prefix: 'raa_dmpvr2_2rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL69255
+
+    Prefix: 'raa_dmpvr2_2rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL69256
+
+    Prefix: 'raa_dmpvr2_2rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL69259
+
+    Prefix: 'raa_dmpvr2_2rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL69260
+
+    Prefix: 'raa_dmpvr2_2rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL69268
+
+    Prefix: 'raa_dmpvr2_2rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL69269
+
+    Prefix: 'raa_dmpvr2_3rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas ISL69298
+
+    Prefix: 'raa_dmpvr2_2rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas RAA228000
+
+    Prefix: 'raa_dmpvr2_hv'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas RAA228004
+
+    Prefix: 'raa_dmpvr2_hv'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas RAA228006
+
+    Prefix: 'raa_dmpvr2_hv'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas RAA228228
+
+    Prefix: 'raa_dmpvr2_2rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas RAA229001
+
+    Prefix: 'raa_dmpvr2_2rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
+
+  * Renesas RAA229004
+
+    Prefix: 'raa_dmpvr2_2rail'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+      Publicly available (after August 2020 launch) at the Renesas website
 
 Authors:
       - Maxim Sloyko <maxims@google.com>
       - Robert Lippert <rlippert@google.com>
       - Patrick Venture <venture@google.com>
+      - Grant Peltier <grant.peltier.jg@renesas.com>
 
 Description
 -----------
 
-Intersil ISL68137 is a digital output 7-phase configurable PWM
-controller with an AVSBus interface.
+This driver supports the Renesas ISL68137 and all 2nd generation Renesas
+digital multiphase voltage regulators (raa_dmpvr2). The ISL68137 is a digital
+output 7-phase configurable PWM controller with an AVSBus interface. 2nd
+generation devices are grouped into 4 distinct configurations: '1rail' for
+single-rail devices, '2rail' for dual-rail devices, '3rail' for 3-rail devices,
+and 'hv' for high voltage single-rail devices. Consult the individual datasheets
+for more information.
 
 Usage Notes
 -----------
@@ -33,10 +419,14 @@ devices explicitly.
 
 The ISL68137 AVS operation mode must be enabled/disabled at runtime.
 
-Beyond the normal sysfs pmbus attributes, the driver exposes a control attribute.
+Beyond the normal sysfs pmbus attributes, the driver exposes a control attribute
+for the ISL68137.
+
+For 2nd generation Renesas digital multiphase voltage regulators, only the
+normal sysfs pmbus attributes are supported.
 
-Additional Sysfs attributes
----------------------------
+ISL68137 sysfs attributes
+-------------------------
 
 ======================= ====================================
 avs(0|1)_enable		Controls the AVS state of each rail.
@@ -78,3 +468,138 @@ temp[1-3]_crit_alarm	Chip temperature critical high alarm
 temp[1-3]_max		Maximum temperature
 temp[1-3]_max_alarm	Chip temperature high alarm
 ======================= ====================================
+
+raa_dmpvr2_1rail/hv sysfs attributes
+------------------------------------
+
+======================= ==========================================
+curr1_label		"iin"
+curr1_input		Measured input current
+curr1_crit		Critical maximum current
+curr1_crit_alarm	Current critical high alarm
+
+curr2_label		"iout"
+curr2_input		Measured output current
+curr2_crit		Critical maximum current
+curr2_crit_alarm	Current critical high alarm
+
+in1_label		"vin"
+in1_input		Measured input voltage
+in1_lcrit		Critical minimum input voltage
+in1_lcrit_alarm		Input voltage critical low alarm
+in1_crit		Critical maximum input voltage
+in1_crit_alarm		Input voltage critical high alarm
+
+in2_label		"vmon"
+in2_input		Scaled VMON voltage read from the VMON pin
+
+in3_label		"vout"
+in3_input		Measured output voltage
+in3_lcrit		Critical minimum output voltage
+in3_lcrit_alarm         Output voltage critical low alarm
+in3_crit		Critical maximum output voltage
+in3_crit_alarm          Output voltage critical high alarm
+
+power1_label		"pin"
+power1_input		Measured input power
+power1_alarm		Input power high alarm
+
+power2_label	        "pout"
+power2_input	        Measured output power
+
+temp[1-3]_input		Measured temperature
+temp[1-3]_crit		Critical high temperature
+temp[1-3]_crit_alarm	Chip temperature critical high alarm
+temp[1-3]_max		Maximum temperature
+temp[1-3]_max_alarm	Chip temperature high alarm
+======================= ==========================================
+
+raa_dmpvr2_2rail sysfs attributes
+---------------------------------
+
+======================= ==========================================
+curr[1-2]_label		"iin[1-2]"
+curr[1-2]_input		Measured input current
+curr[1-2]_crit		Critical maximum current
+curr[1-2]_crit_alarm	Current critical high alarm
+
+curr[3-4]_label		"iout[1-2]"
+curr[3-4]_input		Measured output current
+curr[3-4]_crit		Critical maximum current
+curr[3-4]_crit_alarm	Current critical high alarm
+
+in1_label		"vin"
+in1_input		Measured input voltage
+in1_lcrit		Critical minimum input voltage
+in1_lcrit_alarm		Input voltage critical low alarm
+in1_crit		Critical maximum input voltage
+in1_crit_alarm		Input voltage critical high alarm
+
+in2_label		"vmon"
+in2_input		Scaled VMON voltage read from the VMON pin
+
+in[3-4]_label		"vout[1-2]"
+in[3-4]_input		Measured output voltage
+in[3-4]_lcrit		Critical minimum output voltage
+in[3-4]_lcrit_alarm	Output voltage critical low alarm
+in[3-4]_crit		Critical maximum output voltage
+in[3-4]_crit_alarm	Output voltage critical high alarm
+
+power[1-2]_label	"pin[1-2]"
+power[1-2]_input	Measured input power
+power[1-2]_alarm	Input power high alarm
+
+power[3-4]_label	"pout[1-2]"
+power[3-4]_input	Measured output power
+
+temp[1-5]_input		Measured temperature
+temp[1-5]_crit		Critical high temperature
+temp[1-5]_crit_alarm	Chip temperature critical high alarm
+temp[1-5]_max		Maximum temperature
+temp[1-5]_max_alarm	Chip temperature high alarm
+======================= ==========================================
+
+raa_dmpvr2_3rail sysfs attributes
+---------------------------------
+
+======================= ==========================================
+curr[1-3]_label		"iin[1-3]"
+curr[1-3]_input		Measured input current
+curr[1-3]_crit		Critical maximum current
+curr[1-3]_crit_alarm	Current critical high alarm
+
+curr[4-6]_label		"iout[1-3]"
+curr[4-6]_input		Measured output current
+curr[4-6]_crit		Critical maximum current
+curr[4-6]_crit_alarm	Current critical high alarm
+
+in1_label		"vin"
+in1_input		Measured input voltage
+in1_lcrit		Critical minimum input voltage
+in1_lcrit_alarm		Input voltage critical low alarm
+in1_crit		Critical maximum input voltage
+in1_crit_alarm		Input voltage critical high alarm
+
+in2_label		"vmon"
+in2_input		Scaled VMON voltage read from the VMON pin
+
+in[3-5]_label		"vout[1-3]"
+in[3-5]_input		Measured output voltage
+in[3-5]_lcrit		Critical minimum output voltage
+in[3-5]_lcrit_alarm	Output voltage critical low alarm
+in[3-5]_crit		Critical maximum output voltage
+in[3-5]_crit_alarm	Output voltage critical high alarm
+
+power[1-3]_label	"pin[1-3]"
+power[1-3]_input	Measured input power
+power[1-3]_alarm	Input power high alarm
+
+power[4-6]_label	"pout[1-3]"
+power[4-6]_input	Measured output power
+
+temp[1-7]_input		Measured temperature
+temp[1-7]_crit		Critical high temperature
+temp[1-7]_crit_alarm	Chip temperature critical high alarm
+temp[1-7]_max		Maximum temperature
+temp[1-7]_max_alarm	Chip temperature high alarm
+======================= ==========================================

Documentation/hwmon/k10temp.rst

@@ -100,9 +100,10 @@ socket type, not the processor's actual capabilities.  Therefore, if you
 are using an AM3 processor on an AM2+ mainboard, you can safely use the
 "force=1" parameter.
 
-There is one temperature measurement value, available as temp1_input in
-sysfs. It is measured in degrees Celsius with a resolution of 1/8th degree.
-Please note that it is defined as a relative value; to quote the AMD manual::
+For CPUs older than Family 17h, there is one temperature measurement value,
+available as temp1_input in sysfs. It is measured in degrees Celsius with a
+resolution of 1/8th degree.  Please note that it is defined as a relative
+value; to quote the AMD manual::
 
   Tctl is the processor temperature control value, used by the platform to
   control cooling systems. Tctl is a non-physical temperature on an
@@ -126,3 +127,25 @@ it.
 
 Models from 17h family report relative temperature, the driver aims to
 compensate and report the real temperature.
+
+On Family 17h and Family 18h CPUs, additional temperature sensors may report
+Core Complex Die (CCD) temperatures. Up to 8 such temperatures are reported
+as temp{3..10}_input, labeled Tccd{1..8}. Actual support depends on the CPU
+variant.
+
+Various Family 17h and 18h CPUs report voltage and current telemetry
+information. The following attributes may be reported.
+
+Attribute	Label	Description
+===============	=======	================
+in0_input	Vcore	Core voltage
+in1_input	Vsoc	SoC voltage
+curr1_input	Icore	Core current
+curr2_input	Isoc	SoC current
+===============	=======	================
+
+Current values are raw (unscaled) as reported by the CPU. Core current is
+reported as multiples of 1A / LSB. SoC is reported as multiples of 0.25A
+/ LSB. The real current is board specific. Reported currents should be seen
+as rough guidance, and should be scaled using sensors3.conf as appropriate
+for a given board.

Documentation/hwmon/ltc2978.rst

@@ -3,13 +3,21 @@ Kernel driver ltc2978
 
 Supported chips:
 
+  * Linear Technology LTC2972
+
+    Prefix: 'ltc2972'
+
+    Addresses scanned: -
+
+    Datasheet: https://www.analog.com/en/products/ltc2972.html
+
   * Linear Technology LTC2974
 
     Prefix: 'ltc2974'
 
     Addresses scanned: -
 
-    Datasheet: http://www.linear.com/product/ltc2974
+    Datasheet: https://www.analog.com/en/products/ltc2974
 
   * Linear Technology LTC2975
 
@@ -17,7 +25,7 @@ Supported chips:
 
     Addresses scanned: -
 
-    Datasheet: http://www.linear.com/product/ltc2975
+    Datasheet: https://www.analog.com/en/products/ltc2975
 
   * Linear Technology LTC2977
 
@@ -25,7 +33,7 @@ Supported chips:
 
     Addresses scanned: -
 
-    Datasheet: http://www.linear.com/product/ltc2977
+    Datasheet: https://www.analog.com/en/products/ltc2977
 
   * Linear Technology LTC2978, LTC2978A
 
@@ -33,9 +41,17 @@ Supported chips:
 
     Addresses scanned: -
 
-    Datasheet: http://www.linear.com/product/ltc2978
+    Datasheet: https://www.analog.com/en/products/ltc2978
+
+	       https://www.analog.com/en/products/ltc2978a
+
+  * Linear Technology LTC2979
 
-	       http://www.linear.com/product/ltc2978a
+    Prefix: 'ltc2979'
+
+    Addresses scanned: -
+
+    Datasheet: https://www.analog.com/en/products/ltc2979
 
   * Linear Technology LTC2980
 
@@ -43,7 +59,7 @@ Supported chips:
 
     Addresses scanned: -
 
-    Datasheet: http://www.linear.com/product/ltc2980
+    Datasheet: https://www.analog.com/en/products/ltc2980
 
   * Linear Technology LTC3880
 
@@ -51,7 +67,7 @@ Supported chips:
 
     Addresses scanned: -
 
-    Datasheet: http://www.linear.com/product/ltc3880
+    Datasheet: https://www.analog.com/en/products/ltc3880
 
   * Linear Technology LTC3882
 
@@ -59,7 +75,7 @@ Supported chips:
 
     Addresses scanned: -
 
-    Datasheet: http://www.linear.com/product/ltc3882
+    Datasheet: https://www.analog.com/en/products/ltc3882
 
   * Linear Technology LTC3883
 
@@ -67,7 +83,15 @@ Supported chips:
 
     Addresses scanned: -
 
-    Datasheet: http://www.linear.com/product/ltc3883
+    Datasheet: https://www.analog.com/en/products/ltc3883
+
+  * Linear Technology LTC3884
+
+    Prefix: 'ltc3884'
+
+    Addresses scanned: -
+
+    Datasheet: https://www.analog.com/en/products/ltc3884
 
   * Linear Technology LTC3886
 
@@ -75,7 +99,7 @@ Supported chips:
 
     Addresses scanned: -
 
-    Datasheet: http://www.linear.com/product/ltc3886
+    Datasheet: https://www.analog.com/en/products/ltc3886
 
   * Linear Technology LTC3887
 
@@ -83,7 +107,23 @@ Supported chips:
 
     Addresses scanned: -
 
-    Datasheet: http://www.linear.com/product/ltc3887
+    Datasheet: https://www.analog.com/en/products/ltc3887
+
+  * Linear Technology LTC3889
+
+    Prefix: 'ltc3889'
+
+    Addresses scanned: -
+
+    Datasheet: https://www.analog.com/en/products/ltc3889
+
+  * Linear Technology LTC7880
+
+    Prefix: 'ltc7880'
+
+    Addresses scanned: -
+
+    Datasheet: https://www.analog.com/en/products/ltc7880
 
   * Linear Technology LTM2987
 
@@ -91,7 +131,15 @@ Supported chips:
 
     Addresses scanned: -
 
-    Datasheet: http://www.linear.com/product/ltm2987
+    Datasheet: https://www.analog.com/en/products/ltm2987
+
+  * Linear Technology LTM4644
+
+    Prefix: 'ltm4644'
+
+    Addresses scanned: -
+
+    Datasheet: https://www.analog.com/en/products/ltm4644
 
    * Linear Technology LTM4675
 
@@ -99,7 +147,7 @@ Supported chips:
 
     Addresses scanned: -
 
-    Datasheet: http://www.linear.com/product/ltm4675
+    Datasheet: https://www.analog.com/en/products/ltm4675
 
   * Linear Technology LTM4676
 
@@ -107,7 +155,31 @@ Supported chips:
 
     Addresses scanned: -
 
-    Datasheet: http://www.linear.com/product/ltm4676
+    Datasheet: https://www.analog.com/en/products/ltm4676
+
+  * Linear Technology LTM4677
+
+    Prefix: 'ltm4677'
+
+    Addresses scanned: -
+
+    Datasheet: https://www.analog.com/en/products/ltm4677
+
+  * Linear Technology LTM4678
+
+    Prefix: 'ltm4678'
+
+    Addresses scanned: -
+
+    Datasheet: https://www.analog.com/en/products/ltm4678
+
+  * Analog Devices LTM4680
+
+    Prefix: 'ltm4680'
+
+    Addresses scanned: -
+
+    Datasheet: http://www.analog.com/ltm4680
 
   * Analog Devices LTM4686
 
@@ -117,6 +189,15 @@ Supported chips:
 
     Datasheet: http://www.analog.com/ltm4686
 
+  * Analog Devices LTM4700
+
+    Prefix: 'ltm4700'
+
+    Addresses scanned: -
+
+    Datasheet: http://www.analog.com/ltm4700
+
+
 
 Author: Guenter Roeck <linux@roeck-us.net>
 
@@ -166,13 +247,13 @@ in1_min			Minimum input voltage.
 
 in1_max			Maximum input voltage.
 
-			LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and
-			LTM2987 only.
+			LTC2974, LTC2975, LTC2977, LTC2980, LTC2978,
+			LTC2979 and LTM2987 only.
 
 in1_lcrit		Critical minimum input voltage.
 
-			LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and
-			LTM2987 only.
+			LTC2972, LTC2974, LTC2975, LTC2977, LTC2980, LTC2978,
+			LTC2979 and LTM2987 only.
 
 in1_crit		Critical maximum input voltage.
 
@@ -180,29 +261,34 @@ in1_min_alarm		Input voltage low alarm.
 
 in1_max_alarm		Input voltage high alarm.
 
-			LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and
-			LTM2987 only.
+			LTC2972, LTC2974, LTC2975, LTC2977, LTC2980, LTC2978,
+			LTC2979 and LTM2987 only.
+
 in1_lcrit_alarm		Input voltage critical low alarm.
 
-			LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and
-			LTM2987 only.
+			LTC2972, LTC2974, LTC2975, LTC2977, LTC2980, LTC2978,
+			LTC2979 and LTM2987 only.
+
 in1_crit_alarm		Input voltage critical high alarm.
 
 in1_lowest		Lowest input voltage.
 
-			LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and
-			LTM2987 only.
+			LTC2972, LTC2974, LTC2975, LTC2977, LTC2980, LTC2978,
+			and LTM2987 only.
+
 in1_highest		Highest input voltage.
 
 in1_reset_history	Reset input voltage history.
 
 in[N]_label		"vout[1-8]".
 
+			- LTC2972: N=2-3
 			- LTC2974, LTC2975: N=2-5
-			- LTC2977, LTC2980, LTM2987: N=2-9
+			- LTC2977, LTC2979, LTC2980, LTM2987: N=2-9
 			- LTC2978: N=2-9
-			- LTC3880, LTC3882, LTC23886 LTC3887, LTM4675, LTM4676:
-			  N=2-3
+			- LTC3880, LTC3882, LTC3884, LTC23886 LTC3887, LTC3889,
+			  LTC7880, LTM4644, LTM4675, LTM4676, LTM4677, LTM4678,
+			  LTM4680, LTM4700: N=2-3
 			- LTC3883: N=2
 
 in[N]_input		Measured output voltage.
@@ -225,8 +311,7 @@ in[N]_crit_alarm	Output voltage critical high alarm.
 
 in[N]_lowest		Lowest output voltage.
 
-
-			LTC2974, LTC2975,and LTC2978 only.
+			LTC2972, LTC2974, LTC2975,and LTC2978 only.
 
 in[N]_highest		Highest output voltage.
 
@@ -234,20 +319,24 @@ in[N]_reset_history	Reset output voltage history.
 
 temp[N]_input		Measured temperature.
 
+			- On LTC2972, temp[1-2] report external temperatures,
+			  and temp 3 reports the chip temperature.
 			- On LTC2974 and LTC2975, temp[1-4] report external
 			  temperatures, and temp5 reports the chip temperature.
-			- On LTC2977, LTC2980, LTC2978, and LTM2987, only one
-			  temperature measurement is supported and reports
-			  the chip temperature.
-			- On LTC3880, LTC3882, LTC3887, LTM4675, and LTM4676,
-			  temp1 and temp2 report external temperatures, and
-			  temp3 reports the chip temperature.
+			- On LTC2977, LTC2979, LTC2980, LTC2978, and LTM2987,
+			  only one temperature measurement is supported and
+			  reports the chip temperature.
+			- On LTC3880, LTC3882, LTC3886, LTC3887, LTC3889,
+			  LTM4664, LTM4675, LTM4676, LTM4677, LTM4678, LTM4680,
+			  and LTM4700, temp1 and temp2 report external
+			  temperatures, and temp3 reports the chip temperature.
 			- On LTC3883, temp1 reports an external temperature,
 			  and temp2 reports the chip temperature.
 
 temp[N]_min		Mimimum temperature.
 
-			LTC2974, LCT2977, LTM2980, LTC2978, and LTM2987 only.
+			LTC2972, LTC2974, LCT2977, LTM2980, LTC2978,
+			LTC2979, and LTM2987 only.
 
 temp[N]_max		Maximum temperature.
 
@@ -257,8 +346,8 @@ temp[N]_crit		Critical high temperature.
 
 temp[N]_min_alarm	Temperature low alarm.
 
-			LTC2974, LTC2975, LTC2977, LTM2980, LTC2978, and
-			LTM2987 only.
+			LTC2972, LTC2974, LTC2975, LTC2977, LTM2980, LTC2978,
+			LTC2979, and LTM2987 only.
 
 temp[N]_max_alarm	Temperature high alarm.
 
@@ -269,8 +358,8 @@ temp[N]_crit_alarm	Temperature critical high alarm.
 
 temp[N]_lowest		Lowest measured temperature.
 
-			- LTC2974, LTC2975, LTC2977, LTM2980, LTC2978, and
-			  LTM2987 only.
+			- LTC2972, LTC2974, LTC2975, LTC2977, LTM2980, LTC2978,
+			  LTC2979, and LTM2987 only.
 			- Not supported for chip temperature sensor on LTC2974
 			  and LTC2975.
 
@@ -290,19 +379,22 @@ power1_input		Measured input power.
 
 power[N]_label		"pout[1-4]".
 
+			- LTC2972: N=1-2
 			- LTC2974, LTC2975: N=1-4
-			- LTC2977, LTC2980, LTM2987: Not supported
+			- LTC2977, LTC2979, LTC2980, LTM2987: Not supported
 			- LTC2978: Not supported
-			- LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676:
-			  N=1-2
+			- LTC3880, LTC3882, LTC3884, LTC3886, LTC3887, LTC3889,
+			  LTM4664, LTM4675, LTM4676, LTM4677, LTM4678, LTM4680,
+			  LTM4700: N=1-2
 			- LTC3883: N=2
 
 power[N]_input		Measured output power.
 
 curr1_label		"iin".
 
-			LTC3880, LTC3883, LTC3886, LTC3887, LTM4675,
-			and LTM4676 only.
+			LTC3880, LTC3883, LTC3884, LTC3886, LTC3887, LTC3889,
+			LTM4644, LTM4675, LTM4676, LTM4677, LTM4678, LTM4680,
+			and LTM4700 only.
 
 curr1_input		Measured input current.
 
@@ -320,11 +412,13 @@ curr1_reset_history	Reset input current history.
 
 curr[N]_label		"iout[1-4]".
 
+			- LTC2972: N-1-2
 			- LTC2974, LTC2975: N=1-4
-			- LTC2977, LTC2980, LTM2987: not supported
+			- LTC2977, LTC2979, LTC2980, LTM2987: not supported
 			- LTC2978: not supported
-			- LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676:
-			  N=2-3
+			- LTC3880, LTC3882, LTC3884, LTC3886, LTC3887, LTC3889,
+			  LTM4664, LTM4675, LTM4676, LTM4677, LTM4678, LTM4680,
+			  LTM4700: N=2-3
 			- LTC3883: N=2
 
 curr[N]_input		Measured output current.
@@ -335,7 +429,7 @@ curr[N]_crit		Critical high output current.
 
 curr[N]_lcrit		Critical low output current.
 
-			LTC2974 and LTC2975 only.
+			LTC2972, LTC2974 and LTC2975 only.
 
 curr[N]_max_alarm	Output current high alarm.
 
@@ -343,11 +437,11 @@ curr[N]_crit_alarm	Output current critical high alarm.
 
 curr[N]_lcrit_alarm	Output current critical low alarm.
 
-			LTC2974 and LTC2975 only.
+			LTC2972, LTC2974 and LTC2975 only.
 
 curr[N]_lowest		Lowest output current.
 
-			LTC2974 and LTC2975 only.
+			LTC2972, LTC2974 and LTC2975 only.
 
 curr[N]_highest		Highest output current.
 

Documentation/hwmon/pmbus-core.rst

@@ -162,9 +162,12 @@ Read byte from page <page>, register <reg>.
 
 ::
 
-  int (*read_word_data)(struct i2c_client *client, int page, int reg);
+  int (*read_word_data)(struct i2c_client *client, int page, int phase,
+                        int reg);
 
-Read word from page <page>, register <reg>.
+Read word from page <page>, phase <pase>, register <reg>. If the chip does not
+support multiple phases, the phase parameter can be ignored. If the chip
+supports multiple phases, a phase value of 0xff indicates all phases.
 
 ::
 
@@ -201,16 +204,21 @@ is mandatory.
 
 ::
 
-  int pmbus_set_page(struct i2c_client *client, u8 page);
+  int pmbus_set_page(struct i2c_client *client, u8 page, u8 phase);
 
-Set PMBus page register to <page> for subsequent commands.
+Set PMBus page register to <page> and <phase> for subsequent commands.
+If the chip does not support multiple phases, the phase parameter is
+ignored. Otherwise, a phase value of 0xff selects all phases.
 
 ::
 
-  int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg);
+  int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 phase,
+                           u8 reg);
 
-Read word data from <page>, <reg>. Similar to i2c_smbus_read_word_data(), but
-selects page first.
+Read word data from <page>, <phase>, <reg>. Similar to
+i2c_smbus_read_word_data(), but selects page and phase first. If the chip does
+not support multiple phases, the phase parameter is ignored. Otherwise, a phase
+value of 0xff selects all phases.
 
 ::
 

Documentation/hwmon/pmbus.rst

@@ -227,7 +227,9 @@ currX_lcrit_alarm	Output current critical low alarm.
 			From IOUT_UC_FAULT status.
 currX_crit_alarm	Current critical high alarm.
 			From IIN_OC_FAULT or IOUT_OC_FAULT status.
-currX_label		"iin" or "ioutY"
+currX_label		"iin", "iinY", "iinY.Z", "ioutY", or "ioutY.Z",
+			where Y reflects the page number and Z reflects the
+			phase.
 
 powerX_input		Measured power. From READ_PIN or READ_POUT register.
 powerX_cap		Output power cap. From POUT_MAX register.
@@ -239,7 +241,9 @@ powerX_alarm		Power high alarm.
 			From PIN_OP_WARNING or POUT_OP_WARNING status.
 powerX_crit_alarm	Output power critical high alarm.
 			From POUT_OP_FAULT status.
-powerX_label		"pin" or "poutY"
+powerX_label		"pin", "pinY", "pinY.Z", "poutY", or "poutY.Z",
+			where Y reflects the page number and Z reflects the
+			phase.
 
 tempX_input		Measured temperature.
 			From READ_TEMPERATURE_X register.

Documentation/hwmon/tps53679.rst

+Kernel driver tps53679
+======================
+
+Supported chips:
+
+  * Texas Instruments TPS53647
+
+    Prefix: 'tps53647'
+
+    Addresses scanned: -
+
+    Datasheet: http://www.ti.com/lit/gpn/tps53647
+
+  * Texas Instruments TPS53667
+
+    Prefix: 'tps53667'
+
+    Addresses scanned: -
+
+    Datasheet: http://www.ti.com/lit/gpn/TPS53667
+
+  * Texas Instruments TPS53679
+
+    Prefix: 'tps53679'
+
+    Addresses scanned: -
+
+    Datasheet: http://www.ti.com/lit/gpn/TPS53679 (short version)
+
+  * Texas Instruments TPS53681
+
+    Prefix: 'tps53681'
+
+    Addresses scanned: -
+
+    Datasheet: http://www.ti.com/lit/gpn/TPS53681
+
+  * Texas Instruments TPS53688
+
+    Prefix: 'tps53688'
+
+    Addresses scanned: -
+
+    Datasheet: Available under NDA
+
+
+Authors:
+	Vadim Pasternak <vadimp@mellanox.com>
+	Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+Chips in this series are multi-phase step-down converters with one or two
+output channels and up to 8 phases per channel.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices. You will have to instantiate
+devices explicitly.
+
+Example: the following commands will load the driver for an TPS53681 at address
+0x60 on I2C bus #1::
+
+	# modprobe tps53679
+	# echo tps53681 0x60 > /sys/bus/i2c/devices/i2c-1/new_device
+
+
+Sysfs attributes
+----------------
+
+======================= ========================================================
+in1_label		"vin"
+
+in1_input		Measured input voltage.
+
+in1_lcrit		Critical minimum input voltage
+
+			TPS53679, TPS53681, TPS53688 only.
+
+in1_lcrit_alarm		Input voltage critical low alarm.
+
+			TPS53679, TPS53681, TPS53688 only.
+
+in1_crit		Critical maximum input voltage.
+
+in1_crit_alarm		Input voltage critical high alarm.
+
+in[N]_label		"vout[1-2]"
+
+			- TPS53647, TPS53667: N=2
+			- TPS53679, TPS53588: N=2,3
+
+in[N]_input		Measured output voltage.
+
+in[N]_lcrit		Critical minimum input voltage.
+
+			TPS53679, TPS53681, TPS53688 only.
+
+in[N]_lcrit_alarm	Critical minimum voltage alarm.
+
+			TPS53679, TPS53681, TPS53688 only.
+
+in[N]_alarm		Output voltage alarm.
+
+			TPS53647, TPS53667 only.
+
+in[N]_crit		Critical maximum output voltage.
+
+			TPS53679, TPS53681, TPS53688 only.
+
+in[N]_crit_alarm	Output voltage critical high alarm.
+
+			TPS53679, TPS53681, TPS53688 only.
+
+temp[N]_input		Measured temperature.
+
+			- TPS53647, TPS53667: N=1
+			- TPS53679, TPS53681, TPS53588: N=1,2
+
+temp[N]_max		Maximum temperature.
+
+temp[N]_crit		Critical high temperature.
+
+temp[N]_max_alarm	Temperature high alarm.
+
+temp[N]_crit_alarm	Temperature critical high alarm.
+
+power1_label		"pin".
+
+power1_input		Measured input power.
+
+power[N]_label		"pout[1-2]".
+
+			- TPS53647, TPS53667: N=2
+			- TPS53679, TPS53681, TPS53588: N=2,3
+
+power[N]_input		Measured output power.
+
+curr1_label		"iin".
+
+curr1_input		Measured input current.
+
+curr1_max		Maximum input current.
+
+curr1_max_alarm		Input current high alarm.
+
+curr1_crit		Critical input current.
+
+curr1_crit_alarm	Input current critical alarm.
+
+curr[N]_label		"iout[1-2]" or "iout1.[0-5]".
+
+			The first digit is the output channel, the second
+			digit is the phase within the channel. Per-phase
+			telemetry supported on TPS53681 only.
+
+			- TPS53647, TPS53667: N=2
+			- TPS53679, TPS53588: N=2,3
+			- TPS53681: N=2-9
+
+curr[N]_input		Measured output current.
+
+curr[N]_max		Maximum output current.
+
+curr[N]_crit		Critical high output current.
+
+curr[N]_max_alarm	Output current high alarm.
+
+curr[N]_crit_alarm	Output current critical high alarm.
+
+			Limit and alarm attributes are only available for
+			non-phase telemetry (iout1, iout2).
+
+======================= ========================================================

MAINTAINERS

@@ -2957,6 +2957,14 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/sound/axentia,*
 F:	sound/soc/atmel/tse850-pcm5142.c
 
+AXI-FAN-CONTROL HARDWARE MONITOR DRIVER
+M:	Nuno Sá <nuno.sa@analog.com>
+W:	http://ez.analog.com/community/linux-device-drivers
+L:	linux-hwmon@vger.kernel.org
+S:	Supported
+F:	drivers/hwmon/axi-fan-control.c
+F:	Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
+
 AXXIA I2C CONTROLLER
 M:	Krzysztof Adamski <krzysztof.adamski@nokia.com>
 L:	linux-i2c@vger.kernel.org

drivers/hwmon/Kconfig

@@ -280,6 +280,15 @@ config SENSORS_ASC7621
 	  This driver can also be built as a module. If so, the module
 	  will be called asc7621.
 
+config SENSORS_AXI_FAN_CONTROL
+	tristate "Analog Devices FAN Control HDL Core driver"
+	help
+	  If you say yes here you get support for the Analog Devices
+	  AXI HDL FAN monitoring core.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called axi-fan-control
+
 config SENSORS_K8TEMP
 	tristate "AMD Athlon64/FX or Opteron temperature sensor"
 	depends on X86 && PCI

drivers/hwmon/Makefile

@@ -52,6 +52,7 @@ obj-$(CONFIG_SENSORS_AS370)	+= as370-hwmon.o
 obj-$(CONFIG_SENSORS_ASC7621)	+= asc7621.o
 obj-$(CONFIG_SENSORS_ASPEED)	+= aspeed-pwm-tacho.o
 obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
+obj-$(CONFIG_SENSORS_AXI_FAN_CONTROL) += axi-fan-control.o
 obj-$(CONFIG_SENSORS_CORETEMP)	+= coretemp.o
 obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o
 obj-$(CONFIG_SENSORS_DA9055)+= da9055-hwmon.o

drivers/hwmon/adt7475.c

@@ -19,6 +19,7 @@
 #include <linux/hwmon-vid.h>
 #include <linux/err.h>
 #include <linux/jiffies.h>
+#include <linux/of.h>
 #include <linux/util_macros.h>
 
 /* Indexes for the sysfs hooks */
@@ -193,6 +194,7 @@ struct adt7475_data {
 	unsigned long measure_updated;
 	bool valid;
 
+	u8 config2;
 	u8 config4;
 	u8 config5;
 	u8 has_voltage;
@@ -1458,6 +1460,85 @@ static int adt7475_update_limits(struct i2c_client *client)
 	return 0;
 }
 
+static int set_property_bit(const struct i2c_client *client, char *property,
+			    u8 *config, u8 bit_index)
+{
+	u32 prop_value = 0;
+	int ret = of_property_read_u32(client->dev.of_node, property,
+					&prop_value);
+
+	if (!ret) {
+		if (prop_value)
+			*config |= (1 << bit_index);
+		else
+			*config &= ~(1 << bit_index);
+	}
+
+	return ret;
+}
+
+static int load_attenuators(const struct i2c_client *client, int chip,
+			    struct adt7475_data *data)
+{
+	int ret;
+
+	if (chip == adt7476 || chip == adt7490) {
+		set_property_bit(client, "adi,bypass-attenuator-in0",
+				 &data->config4, 4);
+		set_property_bit(client, "adi,bypass-attenuator-in1",
+				 &data->config4, 5);
+		set_property_bit(client, "adi,bypass-attenuator-in3",
+				 &data->config4, 6);
+		set_property_bit(client, "adi,bypass-attenuator-in4",
+				 &data->config4, 7);
+
+		ret = i2c_smbus_write_byte_data(client, REG_CONFIG4,
+						data->config4);
+		if (ret < 0)
+			return ret;
+	} else if (chip == adt7473 || chip == adt7475) {
+		set_property_bit(client, "adi,bypass-attenuator-in1",
+				 &data->config2, 5);
+
+		ret = i2c_smbus_write_byte_data(client, REG_CONFIG2,
+						data->config2);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int adt7475_set_pwm_polarity(struct i2c_client *client)
+{
+	u32 states[ADT7475_PWM_COUNT];
+	int ret, i;
+	u8 val;
+
+	ret = of_property_read_u32_array(client->dev.of_node,
+					 "adi,pwm-active-state", states,
+					 ARRAY_SIZE(states));
+	if (ret)
+		return ret;
+
+	for (i = 0; i < ADT7475_PWM_COUNT; i++) {
+		ret = adt7475_read(PWM_CONFIG_REG(i));
+		if (ret < 0)
+			return ret;
+		val = ret;
+		if (states[i])
+			val &= ~BIT(4);
+		else
+			val |= BIT(4);
+
+		ret = i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(i), val);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
 static int adt7475_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
@@ -1472,7 +1553,7 @@ static int adt7475_probe(struct i2c_client *client,
 	struct adt7475_data *data;
 	struct device *hwmon_dev;
 	int i, ret = 0, revision, group_num = 0;
-	u8 config2, config3;
+	u8 config3;
 
 	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
 	if (data == NULL)
@@ -1546,8 +1627,12 @@ static int adt7475_probe(struct i2c_client *client,
 	}
 
 	/* Voltage attenuators can be bypassed, globally or individually */
-	config2 = adt7475_read(REG_CONFIG2);
-	if (config2 & CONFIG2_ATTN) {
+	data->config2 = adt7475_read(REG_CONFIG2);
+	ret = load_attenuators(client, chip, data);
+	if (ret)
+		dev_warn(&client->dev, "Error configuring attenuator bypass\n");
+
+	if (data->config2 & CONFIG2_ATTN) {
 		data->bypass_attn = (0x3 << 3) | 0x3;
 	} else {
 		data->bypass_attn = ((data->config4 & CONFIG4_ATTN_IN10) >> 4) |
@@ -1562,6 +1647,10 @@ static int adt7475_probe(struct i2c_client *client,
 	for (i = 0; i < ADT7475_PWM_COUNT; i++)
 		adt7475_read_pwm(client, i);
 
+	ret = adt7475_set_pwm_polarity(client);
+	if (ret && ret != -EINVAL)
+		dev_warn(&client->dev, "Error configuring pwm polarity\n");
+
 	/* Start monitoring */
 	switch (chip) {
 	case adt7475:

drivers/hwmon/axi-fan-control.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Fan Control HDL CORE driver
+ *
+ * Copyright 2019 Analog Devices Inc.
+ */
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/fpga/adi-axi-common.h>
+#include <linux/hwmon.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#define ADI_AXI_PCORE_VER_MAJOR(version)	(((version) >> 16) & 0xff)
+#define ADI_AXI_PCORE_VER_MINOR(version)	(((version) >> 8) & 0xff)
+#define ADI_AXI_PCORE_VER_PATCH(version)	((version) & 0xff)
+
+/* register map */
+#define ADI_REG_RSTN		0x0080
+#define ADI_REG_PWM_WIDTH	0x0084
+#define ADI_REG_TACH_PERIOD	0x0088
+#define ADI_REG_TACH_TOLERANCE	0x008c
+#define ADI_REG_PWM_PERIOD	0x00c0
+#define ADI_REG_TACH_MEASUR	0x00c4
+#define ADI_REG_TEMPERATURE	0x00c8
+
+#define ADI_REG_IRQ_MASK	0x0040
+#define ADI_REG_IRQ_PENDING	0x0044
+#define ADI_REG_IRQ_SRC		0x0048
+
+/* IRQ sources */
+#define ADI_IRQ_SRC_PWM_CHANGED		BIT(0)
+#define ADI_IRQ_SRC_TACH_ERR		BIT(1)
+#define ADI_IRQ_SRC_TEMP_INCREASE	BIT(2)
+#define ADI_IRQ_SRC_NEW_MEASUR		BIT(3)
+#define ADI_IRQ_SRC_MASK		GENMASK(3, 0)
+#define ADI_IRQ_MASK_OUT_ALL		0xFFFFFFFFU
+
+#define SYSFS_PWM_MAX			255
+
+struct axi_fan_control_data {
+	void __iomem *base;
+	struct device *hdev;
+	unsigned long clk_rate;
+	int irq;
+	/* pulses per revolution */
+	u32 ppr;
+	bool hw_pwm_req;
+	bool update_tacho_params;
+	u8 fan_fault;
+};
+
+static inline void axi_iowrite(const u32 val, const u32 reg,
+			       const struct axi_fan_control_data *ctl)
+{
+	iowrite32(val, ctl->base + reg);
+}
+
+static inline u32 axi_ioread(const u32 reg,
+			     const struct axi_fan_control_data *ctl)
+{
+	return ioread32(ctl->base + reg);
+}
+
+static long axi_fan_control_get_pwm_duty(const struct axi_fan_control_data *ctl)
+{
+	u32 pwm_width = axi_ioread(ADI_REG_PWM_WIDTH, ctl);
+	u32 pwm_period = axi_ioread(ADI_REG_PWM_PERIOD, ctl);
+	/*
+	 * PWM_PERIOD is a RO register set by the core. It should never be 0.
+	 * For now we are trusting the HW...
+	 */
+	return DIV_ROUND_CLOSEST(pwm_width * SYSFS_PWM_MAX, pwm_period);
+}
+
+static int axi_fan_control_set_pwm_duty(const long val,
+					struct axi_fan_control_data *ctl)
+{
+	u32 pwm_period = axi_ioread(ADI_REG_PWM_PERIOD, ctl);
+	u32 new_width;
+	long __val = clamp_val(val, 0, SYSFS_PWM_MAX);
+
+	new_width = DIV_ROUND_CLOSEST(__val * pwm_period, SYSFS_PWM_MAX);
+
+	axi_iowrite(new_width, ADI_REG_PWM_WIDTH, ctl);
+
+	return 0;
+}
+
+static long axi_fan_control_get_fan_rpm(const struct axi_fan_control_data *ctl)
+{
+	const u32 tach = axi_ioread(ADI_REG_TACH_MEASUR, ctl);
+
+	if (tach == 0)
+		/* should we return error, EAGAIN maybe? */
+		return 0;
+	/*
+	 * The tacho period should be:
+	 *      TACH = 60/(ppr * rpm), where rpm is revolutions per second
+	 *      and ppr is pulses per revolution.
+	 * Given the tacho period, we can multiply it by the input clock
+	 * so that we know how many clocks we need to have this period.
+	 * From this, we can derive the RPM value.
+	 */
+	return DIV_ROUND_CLOSEST(60 * ctl->clk_rate, ctl->ppr * tach);
+}
+
+static int axi_fan_control_read_temp(struct device *dev, u32 attr, long *val)
+{
+	struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
+	long raw_temp;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		raw_temp = axi_ioread(ADI_REG_TEMPERATURE, ctl);
+		/*
+		 * The formula for the temperature is:
+		 *      T = (ADC * 501.3743 / 2^bits) - 273.6777
+		 * It's multiplied by 1000 to have millidegrees as
+		 * specified by the hwmon sysfs interface.
+		 */
+		*val = ((raw_temp * 501374) >> 16) - 273677;
+		return 0;
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static int axi_fan_control_read_fan(struct device *dev, u32 attr, long *val)
+{
+	struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
+
+	switch (attr) {
+	case hwmon_fan_fault:
+		*val = ctl->fan_fault;
+		/* clear it now */
+		ctl->fan_fault = 0;
+		return 0;
+	case hwmon_fan_input:
+		*val = axi_fan_control_get_fan_rpm(ctl);
+		return 0;
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static int axi_fan_control_read_pwm(struct device *dev, u32 attr, long *val)
+{
+	struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
+
+	switch (attr) {
+	case hwmon_pwm_input:
+		*val = axi_fan_control_get_pwm_duty(ctl);
+		return 0;
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static int axi_fan_control_write_pwm(struct device *dev, u32 attr, long val)
+{
+	struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
+
+	switch (attr) {
+	case hwmon_pwm_input:
+		return axi_fan_control_set_pwm_duty(val, ctl);
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static int axi_fan_control_read_labels(struct device *dev,
+				       enum hwmon_sensor_types type,
+				       u32 attr, int channel, const char **str)
+{
+	switch (type) {
+	case hwmon_fan:
+		*str = "FAN";
+		return 0;
+	case hwmon_temp:
+		*str = "SYSMON4";
+		return 0;
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static int axi_fan_control_read(struct device *dev,
+				enum hwmon_sensor_types type,
+				u32 attr, int channel, long *val)
+{
+	switch (type) {
+	case hwmon_fan:
+		return axi_fan_control_read_fan(dev, attr, val);
+	case hwmon_pwm:
+		return axi_fan_control_read_pwm(dev, attr, val);
+	case hwmon_temp:
+		return axi_fan_control_read_temp(dev, attr, val);
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static int axi_fan_control_write(struct device *dev,
+				 enum hwmon_sensor_types type,
+				 u32 attr, int channel, long val)
+{
+	switch (type) {
+	case hwmon_pwm:
+		return axi_fan_control_write_pwm(dev, attr, val);
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static umode_t axi_fan_control_fan_is_visible(const u32 attr)
+{
+	switch (attr) {
+	case hwmon_fan_input:
+	case hwmon_fan_fault:
+	case hwmon_fan_label:
+		return 0444;
+	default:
+		return 0;
+	}
+}
+
+static umode_t axi_fan_control_pwm_is_visible(const u32 attr)
+{
+	switch (attr) {
+	case hwmon_pwm_input:
+		return 0644;
+	default:
+		return 0;
+	}
+}
+
+static umode_t axi_fan_control_temp_is_visible(const u32 attr)
+{
+	switch (attr) {
+	case hwmon_temp_input:
+	case hwmon_temp_label:
+		return 0444;
+	default:
+		return 0;
+	}
+}
+
+static umode_t axi_fan_control_is_visible(const void *data,
+					  enum hwmon_sensor_types type,
+					  u32 attr, int channel)
+{
+	switch (type) {
+	case hwmon_fan:
+		return axi_fan_control_fan_is_visible(attr);
+	case hwmon_pwm:
+		return axi_fan_control_pwm_is_visible(attr);
+	case hwmon_temp:
+		return axi_fan_control_temp_is_visible(attr);
+	default:
+		return 0;
+	}
+}
+
+/*
+ * This core has two main ways of changing the PWM duty cycle. It is done,
+ * either by a request from userspace (writing on pwm1_input) or by the
+ * core itself. When the change is done by the core, it will use predefined
+ * parameters to evaluate the tach signal and, on that case we cannot set them.
+ * On the other hand, when the request is done by the user, with some arbitrary
+ * value that the core does not now about, we have to provide the tach
+ * parameters so that, the core can evaluate the signal. On the IRQ handler we
+ * distinguish this by using the ADI_IRQ_SRC_TEMP_INCREASE interrupt. This tell
+ * us that the CORE requested a new duty cycle. After this, there is 5s delay
+ * on which the core waits for the fan rotation speed to stabilize. After this
+ * we get ADI_IRQ_SRC_PWM_CHANGED irq where we will decide if we need to set
+ * the tach parameters or not on the next tach measurement cycle (corresponding
+ * already to the ney duty cycle) based on the %ctl->hw_pwm_req flag.
+ */
+static irqreturn_t axi_fan_control_irq_handler(int irq, void *data)
+{
+	struct axi_fan_control_data *ctl = (struct axi_fan_control_data *)data;
+	u32 irq_pending = axi_ioread(ADI_REG_IRQ_PENDING, ctl);
+	u32 clear_mask;
+
+	if (irq_pending & ADI_IRQ_SRC_NEW_MEASUR) {
+		if (ctl->update_tacho_params) {
+			u32 new_tach = axi_ioread(ADI_REG_TACH_MEASUR, ctl);
+
+			/* get 25% tolerance */
+			u32 tach_tol = DIV_ROUND_CLOSEST(new_tach * 25, 100);
+			/* set new tacho parameters */
+			axi_iowrite(new_tach, ADI_REG_TACH_PERIOD, ctl);
+			axi_iowrite(tach_tol, ADI_REG_TACH_TOLERANCE, ctl);
+			ctl->update_tacho_params = false;
+		}
+	}
+
+	if (irq_pending & ADI_IRQ_SRC_PWM_CHANGED) {
+		/*
+		 * if the pwm changes on behalf of software,
+		 * we need to provide new tacho parameters to the core.
+		 * Wait for the next measurement for that...
+		 */
+		if (!ctl->hw_pwm_req) {
+			ctl->update_tacho_params = true;
+		} else {
+			ctl->hw_pwm_req = false;
+			sysfs_notify(&ctl->hdev->kobj, NULL, "pwm1");
+		}
+	}
+
+	if (irq_pending & ADI_IRQ_SRC_TEMP_INCREASE)
+		/* hardware requested a new pwm */
+		ctl->hw_pwm_req = true;
+
+	if (irq_pending & ADI_IRQ_SRC_TACH_ERR)
+		ctl->fan_fault = 1;
+
+	/* clear all interrupts */
+	clear_mask = irq_pending & ADI_IRQ_SRC_MASK;
+	axi_iowrite(clear_mask, ADI_REG_IRQ_PENDING, ctl);
+
+	return IRQ_HANDLED;
+}
+
+static int axi_fan_control_init(struct axi_fan_control_data *ctl,
+				const struct device_node *np)
+{
+	int ret;
+
+	/* get fan pulses per revolution */
+	ret = of_property_read_u32(np, "pulses-per-revolution", &ctl->ppr);
+	if (ret)
+		return ret;
+
+	/* 1, 2 and 4 are the typical and accepted values */
+	if (ctl->ppr != 1 && ctl->ppr != 2 && ctl->ppr != 4)
+		return -EINVAL;
+	/*
+	 * Enable all IRQs
+	 */
+	axi_iowrite(ADI_IRQ_MASK_OUT_ALL &
+		    ~(ADI_IRQ_SRC_NEW_MEASUR | ADI_IRQ_SRC_TACH_ERR |
+		      ADI_IRQ_SRC_PWM_CHANGED | ADI_IRQ_SRC_TEMP_INCREASE),
+		    ADI_REG_IRQ_MASK, ctl);
+
+	/* bring the device out of reset */
+	axi_iowrite(0x01, ADI_REG_RSTN, ctl);
+
+	return ret;
+}
+
+static const struct hwmon_channel_info *axi_fan_control_info[] = {
+	HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT),
+	HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_FAULT | HWMON_F_LABEL),
+	HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_LABEL),
+	NULL
+};
+
+static const struct hwmon_ops axi_fan_control_hwmon_ops = {
+	.is_visible = axi_fan_control_is_visible,
+	.read = axi_fan_control_read,
+	.write = axi_fan_control_write,
+	.read_string = axi_fan_control_read_labels,
+};
+
+static const struct hwmon_chip_info axi_chip_info = {
+	.ops = &axi_fan_control_hwmon_ops,
+	.info = axi_fan_control_info,
+};
+
+static const u32 version_1_0_0 = ADI_AXI_PCORE_VER(1, 0, 'a');
+
+static const struct of_device_id axi_fan_control_of_match[] = {
+	{ .compatible = "adi,axi-fan-control-1.00.a",
+		.data = (void *)&version_1_0_0},
+	{},
+};
+MODULE_DEVICE_TABLE(of, axi_fan_control_of_match);
+
+static int axi_fan_control_probe(struct platform_device *pdev)
+{
+	struct axi_fan_control_data *ctl;
+	struct clk *clk;
+	const struct of_device_id *id;
+	const char *name = "axi_fan_control";
+	u32 version;
+	int ret;
+
+	id = of_match_node(axi_fan_control_of_match, pdev->dev.of_node);
+	if (!id)
+		return -EINVAL;
+
+	ctl = devm_kzalloc(&pdev->dev, sizeof(*ctl), GFP_KERNEL);
+	if (!ctl)
+		return -ENOMEM;
+
+	ctl->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(ctl->base))
+		return PTR_ERR(ctl->base);
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "clk_get failed with %ld\n", PTR_ERR(clk));
+		return PTR_ERR(clk);
+	}
+
+	ctl->clk_rate = clk_get_rate(clk);
+	if (!ctl->clk_rate)
+		return -EINVAL;
+
+	version = axi_ioread(ADI_AXI_REG_VERSION, ctl);
+	if (ADI_AXI_PCORE_VER_MAJOR(version) !=
+	    ADI_AXI_PCORE_VER_MAJOR((*(u32 *)id->data))) {
+		dev_err(&pdev->dev, "Major version mismatch. Expected %d.%.2d.%c, Reported %d.%.2d.%c\n",
+			ADI_AXI_PCORE_VER_MAJOR((*(u32 *)id->data)),
+			ADI_AXI_PCORE_VER_MINOR((*(u32 *)id->data)),
+			ADI_AXI_PCORE_VER_PATCH((*(u32 *)id->data)),
+			ADI_AXI_PCORE_VER_MAJOR(version),
+			ADI_AXI_PCORE_VER_MINOR(version),
+			ADI_AXI_PCORE_VER_PATCH(version));
+		return -ENODEV;
+	}
+
+	ctl->irq = platform_get_irq(pdev, 0);
+	if (ctl->irq < 0)
+		return ctl->irq;
+
+	ret = devm_request_threaded_irq(&pdev->dev, ctl->irq, NULL,
+					axi_fan_control_irq_handler,
+					IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+					pdev->driver_override, ctl);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to request an irq, %d", ret);
+		return ret;
+	}
+
+	ret = axi_fan_control_init(ctl, pdev->dev.of_node);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to initialize device\n");
+		return ret;
+	}
+
+	ctl->hdev = devm_hwmon_device_register_with_info(&pdev->dev,
+							 name,
+							 ctl,
+							 &axi_chip_info,
+							 NULL);
+
+	return PTR_ERR_OR_ZERO(ctl->hdev);
+}
+
+static struct platform_driver axi_fan_control_driver = {
+	.driver = {
+		.name = "axi_fan_control_driver",
+		.of_match_table = axi_fan_control_of_match,
+	},
+	.probe = axi_fan_control_probe,
+};
+module_platform_driver(axi_fan_control_driver);
+
+MODULE_AUTHOR("Nuno Sa <nuno.sa@analog.com>");
+MODULE_DESCRIPTION("Analog Devices Fan Control HDL CORE driver");
+MODULE_LICENSE("GPL");

drivers/hwmon/ibmaem.c

@@ -219,7 +219,7 @@ struct aem_read_sensor_req {
 
 struct aem_read_sensor_resp {
 	struct aem_iana_id	id;
-	u8			bytes[0];
+	u8			bytes[];
 } __packed;
 
 /* Data structures to talk to the IPMI layer */

drivers/hwmon/ibmpowernv.c

@@ -186,7 +186,7 @@ static void make_sensor_label(struct device_node *np,
 	u32 id;
 	size_t n;
 
-	n = snprintf(sdata->label, sizeof(sdata->label), "%s", label);
+	n = scnprintf(sdata->label, sizeof(sdata->label), "%s", label);
 
 	/*
 	 * Core temp pretty print
@@ -199,11 +199,11 @@ static void make_sensor_label(struct device_node *np,
 			 * The digital thermal sensors are associated
 			 * with a core.
 			 */
-			n += snprintf(sdata->label + n,
+			n += scnprintf(sdata->label + n,
 				      sizeof(sdata->label) - n, " %d",
 				      cpuid);
 		else
-			n += snprintf(sdata->label + n,
+			n += scnprintf(sdata->label + n,
 				      sizeof(sdata->label) - n, " phy%d", id);
 	}
 
@@ -211,7 +211,7 @@ static void make_sensor_label(struct device_node *np,
 	 * Membuffer pretty print
 	 */
 	if (!of_property_read_u32(np, "ibm,chip-id", &id))
-		n += snprintf(sdata->label + n, sizeof(sdata->label) - n,
+		n += scnprintf(sdata->label + n, sizeof(sdata->label) - n,
 			      " %d", id & 0xffff);
 }
 

drivers/hwmon/k10temp.c

@@ -96,13 +96,20 @@ struct k10temp_data {
 	void (*read_tempreg)(struct pci_dev *pdev, u32 *regval);
 	int temp_offset;
 	u32 temp_adjust_mask;
-	bool show_tdie;
-	u32 show_tccd;
+	u32 show_temp;
 	u32 svi_addr[2];
+	bool is_zen;
 	bool show_current;
 	int cfactor[2];
 };
 
+#define TCTL_BIT	0
+#define TDIE_BIT	1
+#define TCCD_BIT(x)	((x) + 2)
+
+#define HAVE_TEMP(d, channel)	((d)->show_temp & BIT(channel))
+#define HAVE_TDIE(d)		HAVE_TEMP(d, TDIE_BIT)
+
 struct tctl_offset {
 	u8 model;
 	char const *id;
@@ -180,8 +187,8 @@ static long get_raw_temp(struct k10temp_data *data)
 }
 
 const char *k10temp_temp_label[] = {
-	"Tdie",
 	"Tctl",
+	"Tdie",
 	"Tccd1",
 	"Tccd2",
 	"Tccd3",
@@ -269,13 +276,13 @@ static int k10temp_read_temp(struct device *dev, u32 attr, int channel,
 	switch (attr) {
 	case hwmon_temp_input:
 		switch (channel) {
-		case 0:		/* Tdie */
-			*val = get_raw_temp(data) - data->temp_offset;
+		case 0:		/* Tctl */
+			*val = get_raw_temp(data);
 			if (*val < 0)
 				*val = 0;
 			break;
-		case 1:		/* Tctl */
-			*val = get_raw_temp(data);
+		case 1:		/* Tdie */
+			*val = get_raw_temp(data) - data->temp_offset;
 			if (*val < 0)
 				*val = 0;
 			break;
@@ -333,23 +340,11 @@ static umode_t k10temp_is_visible(const void *_data,
 	case hwmon_temp:
 		switch (attr) {
 		case hwmon_temp_input:
-			switch (channel) {
-			case 0:		/* Tdie, or Tctl if we don't show it */
-				break;
-			case 1:		/* Tctl */
-				if (!data->show_tdie)
-					return 0;
-				break;
-			case 2 ... 9:		/* Tccd{1-8} */
-				if (!(data->show_tccd & BIT(channel - 2)))
+			if (!HAVE_TEMP(data, channel))
 				return 0;
 			break;
-			default:
-				return 0;
-			}
-			break;
 		case hwmon_temp_max:
-			if (channel || data->show_tdie)
+			if (channel || data->is_zen)
 				return 0;
 			break;
 		case hwmon_temp_crit:
@@ -368,20 +363,9 @@ static umode_t k10temp_is_visible(const void *_data,
 				return 0;
 			break;
 		case hwmon_temp_label:
-			/* No labels if we don't show the die temperature */
-			if (!data->show_tdie)
-				return 0;
-			switch (channel) {
-			case 0:		/* Tdie */
-			case 1:		/* Tctl */
-				break;
-			case 2 ... 9:		/* Tccd{1-8} */
-				if (!(data->show_tccd & BIT(channel - 2)))
-					return 0;
-				break;
-			default:
+			/* Show temperature labels only on Zen CPUs */
+			if (!data->is_zen || !HAVE_TEMP(data, channel))
 				return 0;
-			}
 			break;
 		default:
 			return 0;
@@ -480,7 +464,7 @@ static void k10temp_init_debugfs(struct k10temp_data *data)
 	char name[32];
 
 	/* Only show debugfs data for Family 17h/18h CPUs */
-	if (!data->show_tdie)
+	if (!data->is_zen)
 		return;
 
 	scnprintf(name, sizeof(name), "k10temp-%s", pci_name(data->pdev));
@@ -546,7 +530,7 @@ static void k10temp_get_ccd_support(struct pci_dev *pdev,
 		amd_smn_read(amd_pci_dev_to_node_id(pdev),
 			     F17H_M70H_CCD_TEMP(i), &regval);
 		if (regval & F17H_M70H_CCD_TEMP_VALID)
-			data->show_tccd |= BIT(i);
+			data->show_temp |= BIT(TCCD_BIT(i));
 	}
 }
 
@@ -573,6 +557,7 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		return -ENOMEM;
 
 	data->pdev = pdev;
+	data->show_temp |= BIT(TCTL_BIT);	/* Always show Tctl */
 
 	if (boot_cpu_data.x86 == 0x15 &&
 	    ((boot_cpu_data.x86_model & 0xf0) == 0x60 ||
@@ -582,7 +567,8 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	} else if (boot_cpu_data.x86 == 0x17 || boot_cpu_data.x86 == 0x18) {
 		data->temp_adjust_mask = CUR_TEMP_RANGE_SEL_MASK;
 		data->read_tempreg = read_tempreg_nb_f17;
-		data->show_tdie = true;
+		data->show_temp |= BIT(TDIE_BIT);	/* show Tdie */
+		data->is_zen = true;
 
 		switch (boot_cpu_data.x86_model) {
 		case 0x1:	/* Zen */

drivers/hwmon/lm73.c

@@ -262,10 +262,20 @@ static int lm73_detect(struct i2c_client *new_client,
 	return 0;
 }
 
+static const struct of_device_id lm73_of_match[] = {
+	{
+		.compatible = "ti,lm73",
+	},
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, lm73_of_match);
+
 static struct i2c_driver lm73_driver = {
 	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "lm73",
+		.of_match_table = lm73_of_match,
 	},
 	.probe		= lm73_probe,
 	.id_table	= lm73_ids,

drivers/hwmon/nct7904.c

@@ -7,6 +7,11 @@
  *
  * Copyright (c) 2019 Advantech
  * Author: Amy.Shih <amy.shih@advantech.com.tw>
+ *
+ * Supports the following chips:
+ *
+ * Chip        #vin  #fan  #pwm  #temp  #dts  chip ID
+ * nct7904d     20    12    4     5      8    0xc5
  */
 
 #include <linux/module.h>
@@ -820,6 +825,10 @@ static const struct hwmon_channel_info *nct7904_info[] = {
 			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
 			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
 			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
 			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM),
 	HWMON_CHANNEL_INFO(pwm,
 			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
@@ -853,6 +862,18 @@ static const struct hwmon_channel_info *nct7904_info[] = {
 			   HWMON_T_CRIT_HYST,
 			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
 			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
+			   HWMON_T_CRIT_HYST,
+			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
+			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
+			   HWMON_T_CRIT_HYST,
+			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
+			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
+			   HWMON_T_CRIT_HYST,
+			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
+			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
+			   HWMON_T_CRIT_HYST,
+			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
+			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
 			   HWMON_T_CRIT_HYST),
 	NULL
 };

drivers/hwmon/pmbus/Kconfig

@@ -92,10 +92,10 @@ config SENSORS_IRPS5401
 	  be called irps5401.
 
 config SENSORS_ISL68137
-	tristate "Intersil ISL68137"
+	tristate "Renesas Digital Multiphase Voltage Regulators"
 	help
-	  If you say yes here you get hardware monitoring support for Intersil
-	  ISL68137.
+	  If you say yes here you get hardware monitoring support for Renesas
+	  digital multiphase voltage regulators.
 
 	  This driver can also be built as a module. If so, the module will
 	  be called isl68137.
@@ -113,8 +113,8 @@ config SENSORS_LTC2978
 	tristate "Linear Technologies LTC2978 and compatibles"
 	help
 	  If you say yes here you get hardware monitoring support for Linear
-	  Technology LTC2974, LTC2975, LTC2977, LTC2978, LTC2980, LTC3880,
-	  LTC3883, LTC3886, LTC3887, LTCM2987, LTM4675, and LTM4676.
+	  Technology LTC2972, LTC2974, LTC2975, LTC2977, LTC2978, LTC2979,
+	  LTC2980, and LTM2987.
 
 	  This driver can also be built as a module. If so, the module will
 	  be called ltc2978.
@@ -123,9 +123,10 @@ config SENSORS_LTC2978_REGULATOR
 	bool "Regulator support for LTC2978 and compatibles"
 	depends on SENSORS_LTC2978 && REGULATOR
 	help
-	  If you say yes here you get regulator support for Linear
-	  Technology LTC2974, LTC2977, LTC2978, LTC3880, LTC3883, LTM4676
-	  and LTM4686.
+	  If you say yes here you get regulator support for Linear Technology
+	  LTC3880, LTC3883, LTC3884, LTC3886, LTC3887, LTC3889, LTC7880, 
+	  LTM4644, LTM4675, LTM4676, LTM4677, LTM4678, LTM4680, LTM4686, 
+	  and LTM4700.
 
 config SENSORS_LTC3815
 	tristate "Linear Technologies LTC3815"
@@ -209,10 +210,10 @@ config SENSORS_TPS40422
 	  be called tps40422.
 
 config SENSORS_TPS53679
-	tristate "TI TPS53679, TPS53688"
+	tristate "TI TPS53647, TPS53667, TPS53679, TPS53681, TPS53688"
 	help
 	  If you say yes here you get hardware monitoring support for TI
-	  TPS53679, TPS53688
+	  TPS53647, TPS53667, TPS53679, TPS53681, and TPS53688.
 
 	  This driver can also be built as a module. If so, the module will
 	  be called tps53679.

drivers/hwmon/pmbus/adm1275.c

@@ -226,7 +226,8 @@ static int adm1275_write_pmon_config(const struct adm1275_data *data,
 	return ret;
 }
 
-static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
+static int adm1275_read_word_data(struct i2c_client *client, int page,
+				  int phase, int reg)
 {
 	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
 	const struct adm1275_data *data = to_adm1275_data(info);
@@ -239,58 +240,68 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
 	case PMBUS_IOUT_UC_FAULT_LIMIT:
 		if (!data->have_uc_fault)
 			return -ENXIO;
-		ret = pmbus_read_word_data(client, 0, ADM1275_IOUT_WARN2_LIMIT);
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   ADM1275_IOUT_WARN2_LIMIT);
 		break;
 	case PMBUS_IOUT_OC_FAULT_LIMIT:
 		if (!data->have_oc_fault)
 			return -ENXIO;
-		ret = pmbus_read_word_data(client, 0, ADM1275_IOUT_WARN2_LIMIT);
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   ADM1275_IOUT_WARN2_LIMIT);
 		break;
 	case PMBUS_VOUT_OV_WARN_LIMIT:
 		if (data->have_vout)
 			return -ENODATA;
-		ret = pmbus_read_word_data(client, 0,
+		ret = pmbus_read_word_data(client, 0, 0xff,
 					   ADM1075_VAUX_OV_WARN_LIMIT);
 		break;
 	case PMBUS_VOUT_UV_WARN_LIMIT:
 		if (data->have_vout)
 			return -ENODATA;
-		ret = pmbus_read_word_data(client, 0,
+		ret = pmbus_read_word_data(client, 0, 0xff,
 					   ADM1075_VAUX_UV_WARN_LIMIT);
 		break;
 	case PMBUS_READ_VOUT:
 		if (data->have_vout)
 			return -ENODATA;
-		ret = pmbus_read_word_data(client, 0, ADM1075_READ_VAUX);
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   ADM1075_READ_VAUX);
 		break;
 	case PMBUS_VIRT_READ_IOUT_MIN:
 		if (!data->have_iout_min)
 			return -ENXIO;
-		ret = pmbus_read_word_data(client, 0, ADM1293_IOUT_MIN);
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   ADM1293_IOUT_MIN);
 		break;
 	case PMBUS_VIRT_READ_IOUT_MAX:
-		ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_IOUT);
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   ADM1275_PEAK_IOUT);
 		break;
 	case PMBUS_VIRT_READ_VOUT_MAX:
-		ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_VOUT);
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   ADM1275_PEAK_VOUT);
 		break;
 	case PMBUS_VIRT_READ_VIN_MAX:
-		ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_VIN);
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   ADM1275_PEAK_VIN);
 		break;
 	case PMBUS_VIRT_READ_PIN_MIN:
 		if (!data->have_pin_min)
 			return -ENXIO;
-		ret = pmbus_read_word_data(client, 0, ADM1293_PIN_MIN);
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   ADM1293_PIN_MIN);
 		break;
 	case PMBUS_VIRT_READ_PIN_MAX:
 		if (!data->have_pin_max)
 			return -ENXIO;
-		ret = pmbus_read_word_data(client, 0, ADM1276_PEAK_PIN);
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   ADM1276_PEAK_PIN);
 		break;
 	case PMBUS_VIRT_READ_TEMP_MAX:
 		if (!data->have_temp_max)
 			return -ENXIO;
-		ret = pmbus_read_word_data(client, 0, ADM1278_PEAK_TEMP);
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   ADM1278_PEAK_TEMP);
 		break;
 	case PMBUS_VIRT_RESET_IOUT_HISTORY:
 	case PMBUS_VIRT_RESET_VOUT_HISTORY:

drivers/hwmon/pmbus/ibm-cffps.c

@@ -33,9 +33,12 @@
 #define CFFPS_INPUT_HISTORY_CMD			0xD6
 #define CFFPS_INPUT_HISTORY_SIZE		100
 
+#define CFFPS_CCIN_REVISION			GENMASK(7, 0)
+#define  CFFPS_CCIN_REVISION_LEGACY		 0xde
 #define CFFPS_CCIN_VERSION			GENMASK(15, 8)
 #define CFFPS_CCIN_VERSION_1			 0x2b
 #define CFFPS_CCIN_VERSION_2			 0x2e
+#define CFFPS_CCIN_VERSION_3			 0x51
 
 /* STATUS_MFR_SPECIFIC bits */
 #define CFFPS_MFR_FAN_FAULT			BIT(0)
@@ -148,7 +151,7 @@ static ssize_t ibm_cffps_debugfs_read(struct file *file, char __user *buf,
 	struct ibm_cffps *psu = to_psu(idxp, idx);
 	char data[I2C_SMBUS_BLOCK_MAX + 2] = { 0 };
 
-	pmbus_set_page(psu->client, 0);
+	pmbus_set_page(psu->client, 0, 0xff);
 
 	switch (idx) {
 	case CFFPS_DEBUGFS_INPUT_HISTORY:
@@ -247,7 +250,7 @@ static ssize_t ibm_cffps_debugfs_write(struct file *file,
 
 	switch (idx) {
 	case CFFPS_DEBUGFS_ON_OFF_CONFIG:
-		pmbus_set_page(psu->client, 0);
+		pmbus_set_page(psu->client, 0, 0xff);
 
 		rc = simple_write_to_buffer(&data, 1, ppos, buf, count);
 		if (rc <= 0)
@@ -325,13 +328,13 @@ static int ibm_cffps_read_byte_data(struct i2c_client *client, int page,
 }
 
 static int ibm_cffps_read_word_data(struct i2c_client *client, int page,
-				    int reg)
+				    int phase, int reg)
 {
 	int rc, mfr;
 
 	switch (reg) {
 	case PMBUS_STATUS_WORD:
-		rc = pmbus_read_word_data(client, page, reg);
+		rc = pmbus_read_word_data(client, page, phase, reg);
 		if (rc < 0)
 			return rc;
 
@@ -348,7 +351,8 @@ static int ibm_cffps_read_word_data(struct i2c_client *client, int page,
 			rc |= PB_STATUS_OFF;
 		break;
 	case PMBUS_VIRT_READ_VMON:
-		rc = pmbus_read_word_data(client, page, CFFPS_12VCS_VOUT_CMD);
+		rc = pmbus_read_word_data(client, page, phase,
+					  CFFPS_12VCS_VOUT_CMD);
 		break;
 	default:
 		rc = -ENODATA;
@@ -379,7 +383,7 @@ static int ibm_cffps_led_brightness_set(struct led_classdev *led_cdev,
 	dev_dbg(&psu->client->dev, "LED brightness set: %d. Command: %d.\n",
 		brightness, next_led_state);
 
-	pmbus_set_page(psu->client, 0);
+	pmbus_set_page(psu->client, 0, 0xff);
 
 	rc = i2c_smbus_write_byte_data(psu->client, CFFPS_SYS_CONFIG_CMD,
 				       next_led_state);
@@ -401,7 +405,7 @@ static int ibm_cffps_led_blink_set(struct led_classdev *led_cdev,
 
 	dev_dbg(&psu->client->dev, "LED blink set.\n");
 
-	pmbus_set_page(psu->client, 0);
+	pmbus_set_page(psu->client, 0, 0xff);
 
 	rc = i2c_smbus_write_byte_data(psu->client, CFFPS_SYS_CONFIG_CMD,
 				       CFFPS_LED_BLINK);
@@ -485,11 +489,14 @@ static int ibm_cffps_probe(struct i2c_client *client,
 		vs = (enum versions)id->driver_data;
 
 	if (vs == cffps_unknown) {
+		u16 ccin_revision = 0;
 		u16 ccin_version = CFFPS_CCIN_VERSION_1;
 		int ccin = i2c_smbus_read_word_swapped(client, CFFPS_CCIN_CMD);
 
-		if (ccin > 0)
+		if (ccin > 0) {
+			ccin_revision = FIELD_GET(CFFPS_CCIN_REVISION, ccin);
 			ccin_version = FIELD_GET(CFFPS_CCIN_VERSION, ccin);
+		}
 
 		switch (ccin_version) {
 		default:
@@ -499,6 +506,12 @@ static int ibm_cffps_probe(struct i2c_client *client,
 		case CFFPS_CCIN_VERSION_2:
 			vs = cffps2;
 			break;
+		case CFFPS_CCIN_VERSION_3:
+			if (ccin_revision == CFFPS_CCIN_REVISION_LEGACY)
+				vs = cffps1;
+			else
+				vs = cffps2;
+			break;
 		}
 
 		/* Set the client name to include the version number. */

drivers/hwmon/pmbus/ir35221.c

@@ -21,37 +21,42 @@
 #define IR35221_MFR_IOUT_VALLEY		0xcb
 #define IR35221_MFR_TEMP_VALLEY		0xcc
 
-static int ir35221_read_word_data(struct i2c_client *client, int page, int reg)
+static int ir35221_read_word_data(struct i2c_client *client, int page,
+				  int phase, int reg)
 {
 	int ret;
 
 	switch (reg) {
 	case PMBUS_VIRT_READ_VIN_MAX:
-		ret = pmbus_read_word_data(client, page, IR35221_MFR_VIN_PEAK);
+		ret = pmbus_read_word_data(client, page, phase,
+					   IR35221_MFR_VIN_PEAK);
 		break;
 	case PMBUS_VIRT_READ_VOUT_MAX:
-		ret = pmbus_read_word_data(client, page, IR35221_MFR_VOUT_PEAK);
+		ret = pmbus_read_word_data(client, page, phase,
+					   IR35221_MFR_VOUT_PEAK);
 		break;
 	case PMBUS_VIRT_READ_IOUT_MAX:
-		ret = pmbus_read_word_data(client, page, IR35221_MFR_IOUT_PEAK);
+		ret = pmbus_read_word_data(client, page, phase,
+					   IR35221_MFR_IOUT_PEAK);
 		break;
 	case PMBUS_VIRT_READ_TEMP_MAX:
-		ret = pmbus_read_word_data(client, page, IR35221_MFR_TEMP_PEAK);
+		ret = pmbus_read_word_data(client, page, phase,
+					   IR35221_MFR_TEMP_PEAK);
 		break;
 	case PMBUS_VIRT_READ_VIN_MIN:
-		ret = pmbus_read_word_data(client, page,
+		ret = pmbus_read_word_data(client, page, phase,
 					   IR35221_MFR_VIN_VALLEY);
 		break;
 	case PMBUS_VIRT_READ_VOUT_MIN:
-		ret = pmbus_read_word_data(client, page,
+		ret = pmbus_read_word_data(client, page, phase,
 					   IR35221_MFR_VOUT_VALLEY);
 		break;
 	case PMBUS_VIRT_READ_IOUT_MIN:
-		ret = pmbus_read_word_data(client, page,
+		ret = pmbus_read_word_data(client, page, phase,
 					   IR35221_MFR_IOUT_VALLEY);
 		break;
 	case PMBUS_VIRT_READ_TEMP_MIN:
-		ret = pmbus_read_word_data(client, page,
+		ret = pmbus_read_word_data(client, page, phase,
 					   IR35221_MFR_TEMP_VALLEY);
 		break;
 	default:

drivers/hwmon/pmbus/isl68137.c

 // SPDX-License-Identifier: GPL-2.0+
 /*
- * Hardware monitoring driver for Intersil ISL68137
+ * Hardware monitoring driver for Renesas Digital Multiphase Voltage Regulators
  *
  * Copyright (c) 2017 Google Inc
+ * Copyright (c) 2020 Renesas Electronics America
  *
  */
 
@@ -14,9 +15,19 @@
 #include <linux/module.h>
 #include <linux/string.h>
 #include <linux/sysfs.h>
+
 #include "pmbus.h"
 
 #define ISL68137_VOUT_AVS	0x30
+#define RAA_DMPVR2_READ_VMON	0xc8
+
+enum versions {
+	isl68137,
+	raa_dmpvr2_1rail,
+	raa_dmpvr2_2rail,
+	raa_dmpvr2_3rail,
+	raa_dmpvr2_hv,
+};
 
 static ssize_t isl68137_avs_enable_show_page(struct i2c_client *client,
 					     int page,
@@ -49,7 +60,8 @@ static ssize_t isl68137_avs_enable_store_page(struct i2c_client *client,
 	 * enabling AVS control is the workaround.
 	 */
 	if (op_val == ISL68137_VOUT_AVS) {
-		rc = pmbus_read_word_data(client, page, PMBUS_VOUT_COMMAND);
+		rc = pmbus_read_word_data(client, page, 0xff,
+					  PMBUS_VOUT_COMMAND);
 		if (rc < 0)
 			return rc;
 
@@ -98,13 +110,31 @@ static const struct attribute_group enable_group = {
 	.attrs = enable_attrs,
 };
 
-static const struct attribute_group *attribute_groups[] = {
+static const struct attribute_group *isl68137_attribute_groups[] = {
 	&enable_group,
 	NULL,
 };
 
-static struct pmbus_driver_info isl68137_info = {
-	.pages = 2,
+static int raa_dmpvr2_read_word_data(struct i2c_client *client, int page,
+				     int phase, int reg)
+{
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_READ_VMON:
+		ret = pmbus_read_word_data(client, page, phase,
+					   RAA_DMPVR2_READ_VMON);
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+
+	return ret;
+}
+
+static struct pmbus_driver_info raa_dmpvr_info = {
+	.pages = 3,
 	.format[PSC_VOLTAGE_IN] = direct,
 	.format[PSC_VOLTAGE_OUT] = direct,
 	.format[PSC_CURRENT_IN] = direct,
@@ -113,7 +143,7 @@ static struct pmbus_driver_info isl68137_info = {
 	.format[PSC_TEMPERATURE] = direct,
 	.m[PSC_VOLTAGE_IN] = 1,
 	.b[PSC_VOLTAGE_IN] = 0,
-	.R[PSC_VOLTAGE_IN] = 3,
+	.R[PSC_VOLTAGE_IN] = 2,
 	.m[PSC_VOLTAGE_OUT] = 1,
 	.b[PSC_VOLTAGE_OUT] = 0,
 	.R[PSC_VOLTAGE_OUT] = 3,
@@ -133,24 +163,76 @@ static struct pmbus_driver_info isl68137_info = {
 	    | PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2
 	    | PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_TEMP
 	    | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
-	    | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT,
-	.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
-	    | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT,
-	.groups = attribute_groups,
+	    | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT
+		| PMBUS_HAVE_VMON,
+	.func[1] = PMBUS_HAVE_IIN | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT
+	    | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_TEMP
+	    | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_IOUT
+	    | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT,
+	.func[2] = PMBUS_HAVE_IIN | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT
+	    | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_TEMP
+	    | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_IOUT
+	    | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT,
 };
 
 static int isl68137_probe(struct i2c_client *client,
 			  const struct i2c_device_id *id)
 {
-	return pmbus_do_probe(client, id, &isl68137_info);
+	struct pmbus_driver_info *info;
+
+	info = devm_kzalloc(&client->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+	memcpy(info, &raa_dmpvr_info, sizeof(*info));
+
+	switch (id->driver_data) {
+	case isl68137:
+		info->pages = 2;
+		info->R[PSC_VOLTAGE_IN] = 3;
+		info->func[0] &= ~PMBUS_HAVE_VMON;
+		info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		    | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+		    | PMBUS_HAVE_POUT;
+		info->groups = isl68137_attribute_groups;
+		break;
+	case raa_dmpvr2_1rail:
+		info->pages = 1;
+		info->read_word_data = raa_dmpvr2_read_word_data;
+		break;
+	case raa_dmpvr2_2rail:
+		info->pages = 2;
+		info->read_word_data = raa_dmpvr2_read_word_data;
+		break;
+	case raa_dmpvr2_3rail:
+		info->read_word_data = raa_dmpvr2_read_word_data;
+		break;
+	case raa_dmpvr2_hv:
+		info->pages = 1;
+		info->R[PSC_VOLTAGE_IN] = 1;
+		info->m[PSC_VOLTAGE_OUT] = 2;
+		info->R[PSC_VOLTAGE_OUT] = 2;
+		info->m[PSC_CURRENT_IN] = 2;
+		info->m[PSC_POWER] = 2;
+		info->R[PSC_POWER] = -1;
+		info->read_word_data = raa_dmpvr2_read_word_data;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	return pmbus_do_probe(client, id, info);
 }
 
-static const struct i2c_device_id isl68137_id[] = {
-	{"isl68137", 0},
+static const struct i2c_device_id raa_dmpvr_id[] = {
+	{"isl68137", isl68137},
+	{"raa_dmpvr2_1rail", raa_dmpvr2_1rail},
+	{"raa_dmpvr2_2rail", raa_dmpvr2_2rail},
+	{"raa_dmpvr2_3rail", raa_dmpvr2_3rail},
+	{"raa_dmpvr2_hv", raa_dmpvr2_hv},
 	{}
 };
 
-MODULE_DEVICE_TABLE(i2c, isl68137_id);
+MODULE_DEVICE_TABLE(i2c, raa_dmpvr_id);
 
 /* This is the driver that will be inserted */
 static struct i2c_driver isl68137_driver = {
@@ -159,11 +241,11 @@ static struct i2c_driver isl68137_driver = {
 		   },
 	.probe = isl68137_probe,
 	.remove = pmbus_do_remove,
-	.id_table = isl68137_id,
+	.id_table = raa_dmpvr_id,
 };
 
 module_i2c_driver(isl68137_driver);
 
 MODULE_AUTHOR("Maxim Sloyko <maxims@google.com>");
-MODULE_DESCRIPTION("PMBus driver for Intersil ISL68137");
+MODULE_DESCRIPTION("PMBus driver for Renesas digital multiphase voltage regulators");
 MODULE_LICENSE("GPL");

drivers/hwmon/pmbus/lm25066.c

@@ -211,7 +211,8 @@ struct lm25066_data {
 
 #define to_lm25066_data(x)  container_of(x, struct lm25066_data, info)
 
-static int lm25066_read_word_data(struct i2c_client *client, int page, int reg)
+static int lm25066_read_word_data(struct i2c_client *client, int page,
+				  int phase, int reg)
 {
 	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
 	const struct lm25066_data *data = to_lm25066_data(info);
@@ -219,7 +220,7 @@ static int lm25066_read_word_data(struct i2c_client *client, int page, int reg)
 
 	switch (reg) {
 	case PMBUS_VIRT_READ_VMON:
-		ret = pmbus_read_word_data(client, 0, LM25066_READ_VAUX);
+		ret = pmbus_read_word_data(client, 0, 0xff, LM25066_READ_VAUX);
 		if (ret < 0)
 			break;
 		/* Adjust returned value to match VIN coefficients */
@@ -244,33 +245,40 @@ static int lm25066_read_word_data(struct i2c_client *client, int page, int reg)
 		}
 		break;
 	case PMBUS_READ_IIN:
-		ret = pmbus_read_word_data(client, 0, LM25066_MFR_READ_IIN);
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   LM25066_MFR_READ_IIN);
 		break;
 	case PMBUS_READ_PIN:
-		ret = pmbus_read_word_data(client, 0, LM25066_MFR_READ_PIN);
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   LM25066_MFR_READ_PIN);
 		break;
 	case PMBUS_IIN_OC_WARN_LIMIT:
-		ret = pmbus_read_word_data(client, 0,
+		ret = pmbus_read_word_data(client, 0, 0xff,
 					   LM25066_MFR_IIN_OC_WARN_LIMIT);
 		break;
 	case PMBUS_PIN_OP_WARN_LIMIT:
-		ret = pmbus_read_word_data(client, 0,
+		ret = pmbus_read_word_data(client, 0, 0xff,
 					   LM25066_MFR_PIN_OP_WARN_LIMIT);
 		break;
 	case PMBUS_VIRT_READ_VIN_AVG:
-		ret = pmbus_read_word_data(client, 0, LM25066_READ_AVG_VIN);
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   LM25066_READ_AVG_VIN);
 		break;
 	case PMBUS_VIRT_READ_VOUT_AVG:
-		ret = pmbus_read_word_data(client, 0, LM25066_READ_AVG_VOUT);
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   LM25066_READ_AVG_VOUT);
 		break;
 	case PMBUS_VIRT_READ_IIN_AVG:
-		ret = pmbus_read_word_data(client, 0, LM25066_READ_AVG_IIN);
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   LM25066_READ_AVG_IIN);
 		break;
 	case PMBUS_VIRT_READ_PIN_AVG:
-		ret = pmbus_read_word_data(client, 0, LM25066_READ_AVG_PIN);
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   LM25066_READ_AVG_PIN);
 		break;
 	case PMBUS_VIRT_READ_PIN_MAX:
-		ret = pmbus_read_word_data(client, 0, LM25066_READ_PIN_PEAK);
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   LM25066_READ_PIN_PEAK);
 		break;
 	case PMBUS_VIRT_RESET_PIN_HISTORY:
 		ret = 0;
@@ -288,13 +296,14 @@ static int lm25066_read_word_data(struct i2c_client *client, int page, int reg)
 	return ret;
 }
 
-static int lm25056_read_word_data(struct i2c_client *client, int page, int reg)
+static int lm25056_read_word_data(struct i2c_client *client, int page,
+				  int phase, int reg)
 {
 	int ret;
 
 	switch (reg) {
 	case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
-		ret = pmbus_read_word_data(client, 0,
+		ret = pmbus_read_word_data(client, 0, 0xff,
 					   LM25056_VAUX_UV_WARN_LIMIT);
 		if (ret < 0)
 			break;
@@ -302,7 +311,7 @@ static int lm25056_read_word_data(struct i2c_client *client, int page, int reg)
 		ret = DIV_ROUND_CLOSEST(ret * 293, 6140);
 		break;
 	case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
-		ret = pmbus_read_word_data(client, 0,
+		ret = pmbus_read_word_data(client, 0, 0xff,
 					   LM25056_VAUX_OV_WARN_LIMIT);
 		if (ret < 0)
 			break;
@@ -310,7 +319,7 @@ static int lm25056_read_word_data(struct i2c_client *client, int page, int reg)
 		ret = DIV_ROUND_CLOSEST(ret * 293, 6140);
 		break;
 	default:
-		ret = lm25066_read_word_data(client, page, reg);
+		ret = lm25066_read_word_data(client, page, phase, reg);
 		break;
 	}
 	return ret;

drivers/hwmon/pmbus/ltc2978.c

@@ -19,8 +19,15 @@
 #include <linux/regulator/driver.h>
 #include "pmbus.h"
 
-enum chips { ltc2974, ltc2975, ltc2977, ltc2978, ltc2980, ltc3880, ltc3882,
-	ltc3883, ltc3886, ltc3887, ltm2987, ltm4675, ltm4676, ltm4686 };
+enum chips {
+	/* Managers */
+	ltc2972, ltc2974, ltc2975, ltc2977, ltc2978, ltc2979, ltc2980,
+	/* Controllers */
+	ltc3880, ltc3882, ltc3883, ltc3884, ltc3886, ltc3887, ltc3889, ltc7880,
+	/* Modules */
+	ltm2987, ltm4664, ltm4675, ltm4676, ltm4677, ltm4678, ltm4680, ltm4686,
+	ltm4700,
+};
 
 /* Common for all chips */
 #define LTC2978_MFR_VOUT_PEAK		0xdd
@@ -43,9 +50,10 @@ enum chips { ltc2974, ltc2975, ltc2977, ltc2978, ltc2980, ltc3880, ltc3882,
 #define LTC3880_MFR_CLEAR_PEAKS		0xe3
 #define LTC3880_MFR_TEMPERATURE2_PEAK	0xf4
 
-/* LTC3883 and LTC3886 only */
+/* LTC3883, LTC3884, LTC3886, LTC3889 and LTC7880 only */
 #define LTC3883_MFR_IIN_PEAK		0xe1
 
+
 /* LTC2975 only */
 #define LTC2975_MFR_IIN_PEAK		0xc4
 #define LTC2975_MFR_IIN_MIN		0xc5
@@ -54,27 +62,41 @@ enum chips { ltc2974, ltc2975, ltc2977, ltc2978, ltc2980, ltc3880, ltc3882,
 
 #define LTC2978_ID_MASK			0xfff0
 
+#define LTC2972_ID			0x0310
 #define LTC2974_ID			0x0210
 #define LTC2975_ID			0x0220
 #define LTC2977_ID			0x0130
 #define LTC2978_ID_REV1			0x0110	/* Early revision */
 #define LTC2978_ID_REV2			0x0120
+#define LTC2979_ID_A			0x8060
+#define LTC2979_ID_B			0x8070
 #define LTC2980_ID_A			0x8030	/* A/B for two die IDs */
 #define LTC2980_ID_B			0x8040
 #define LTC3880_ID			0x4020
 #define LTC3882_ID			0x4200
 #define LTC3882_ID_D1			0x4240	/* Dash 1 */
 #define LTC3883_ID			0x4300
+#define LTC3884_ID			0x4C00
 #define LTC3886_ID			0x4600
 #define LTC3887_ID			0x4700
 #define LTM2987_ID_A			0x8010	/* A/B for two die IDs */
 #define LTM2987_ID_B			0x8020
+#define LTC3889_ID			0x4900
+#define LTC7880_ID			0x49E0
+#define LTM4664_ID			0x4120
 #define LTM4675_ID			0x47a0
 #define LTM4676_ID_REV1			0x4400
 #define LTM4676_ID_REV2			0x4480
 #define LTM4676A_ID			0x47e0
+#define LTM4677_ID_REV1			0x47B0
+#define LTM4677_ID_REV2			0x47D0
+#define LTM4678_ID_REV1			0x4100
+#define LTM4678_ID_REV2			0x4110
+#define LTM4680_ID			0x4140
 #define LTM4686_ID			0x4770
+#define LTM4700_ID			0x4130
 
+#define LTC2972_NUM_PAGES		2
 #define LTC2974_NUM_PAGES		4
 #define LTC2978_NUM_PAGES		8
 #define LTC3880_NUM_PAGES		2
@@ -151,7 +173,8 @@ static int ltc_wait_ready(struct i2c_client *client)
 	return -ETIMEDOUT;
 }
 
-static int ltc_read_word_data(struct i2c_client *client, int page, int reg)
+static int ltc_read_word_data(struct i2c_client *client, int page, int phase,
+			      int reg)
 {
 	int ret;
 
@@ -159,7 +182,7 @@ static int ltc_read_word_data(struct i2c_client *client, int page, int reg)
 	if (ret < 0)
 		return ret;
 
-	return pmbus_read_word_data(client, page, reg);
+	return pmbus_read_word_data(client, page, 0xff, reg);
 }
 
 static int ltc_read_byte_data(struct i2c_client *client, int page, int reg)
@@ -202,7 +225,7 @@ static int ltc_get_max(struct ltc2978_data *data, struct i2c_client *client,
 {
 	int ret;
 
-	ret = ltc_read_word_data(client, page, reg);
+	ret = ltc_read_word_data(client, page, 0xff, reg);
 	if (ret >= 0) {
 		if (lin11_to_val(ret) > lin11_to_val(*pmax))
 			*pmax = ret;
@@ -216,7 +239,7 @@ static int ltc_get_min(struct ltc2978_data *data, struct i2c_client *client,
 {
 	int ret;
 
-	ret = ltc_read_word_data(client, page, reg);
+	ret = ltc_read_word_data(client, page, 0xff, reg);
 	if (ret >= 0) {
 		if (lin11_to_val(ret) < lin11_to_val(*pmin))
 			*pmin = ret;
@@ -238,7 +261,8 @@ static int ltc2978_read_word_data_common(struct i2c_client *client, int page,
 				  &data->vin_max);
 		break;
 	case PMBUS_VIRT_READ_VOUT_MAX:
-		ret = ltc_read_word_data(client, page, LTC2978_MFR_VOUT_PEAK);
+		ret = ltc_read_word_data(client, page, 0xff,
+					 LTC2978_MFR_VOUT_PEAK);
 		if (ret >= 0) {
 			/*
 			 * VOUT is 16 bit unsigned with fixed exponent,
@@ -269,7 +293,8 @@ static int ltc2978_read_word_data_common(struct i2c_client *client, int page,
 	return ret;
 }
 
-static int ltc2978_read_word_data(struct i2c_client *client, int page, int reg)
+static int ltc2978_read_word_data(struct i2c_client *client, int page,
+				  int phase, int reg)
 {
 	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
 	struct ltc2978_data *data = to_ltc2978_data(info);
@@ -281,7 +306,8 @@ static int ltc2978_read_word_data(struct i2c_client *client, int page, int reg)
 				  &data->vin_min);
 		break;
 	case PMBUS_VIRT_READ_VOUT_MIN:
-		ret = ltc_read_word_data(client, page, LTC2978_MFR_VOUT_MIN);
+		ret = ltc_read_word_data(client, page, phase,
+					 LTC2978_MFR_VOUT_MIN);
 		if (ret >= 0) {
 			/*
 			 * VOUT_MIN is known to not be supported on some lots
@@ -314,7 +340,8 @@ static int ltc2978_read_word_data(struct i2c_client *client, int page, int reg)
 	return ret;
 }
 
-static int ltc2974_read_word_data(struct i2c_client *client, int page, int reg)
+static int ltc2974_read_word_data(struct i2c_client *client, int page,
+				  int phase, int reg)
 {
 	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
 	struct ltc2978_data *data = to_ltc2978_data(info);
@@ -333,13 +360,14 @@ static int ltc2974_read_word_data(struct i2c_client *client, int page, int reg)
 		ret = 0;
 		break;
 	default:
-		ret = ltc2978_read_word_data(client, page, reg);
+		ret = ltc2978_read_word_data(client, page, phase, reg);
 		break;
 	}
 	return ret;
 }
 
-static int ltc2975_read_word_data(struct i2c_client *client, int page, int reg)
+static int ltc2975_read_word_data(struct i2c_client *client, int page,
+				  int phase, int reg)
 {
 	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
 	struct ltc2978_data *data = to_ltc2978_data(info);
@@ -367,13 +395,14 @@ static int ltc2975_read_word_data(struct i2c_client *client, int page, int reg)
 		ret = 0;
 		break;
 	default:
-		ret = ltc2978_read_word_data(client, page, reg);
+		ret = ltc2978_read_word_data(client, page, phase, reg);
 		break;
 	}
 	return ret;
 }
 
-static int ltc3880_read_word_data(struct i2c_client *client, int page, int reg)
+static int ltc3880_read_word_data(struct i2c_client *client, int page,
+				  int phase, int reg)
 {
 	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
 	struct ltc2978_data *data = to_ltc2978_data(info);
@@ -405,7 +434,8 @@ static int ltc3880_read_word_data(struct i2c_client *client, int page, int reg)
 	return ret;
 }
 
-static int ltc3883_read_word_data(struct i2c_client *client, int page, int reg)
+static int ltc3883_read_word_data(struct i2c_client *client, int page,
+				  int phase, int reg)
 {
 	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
 	struct ltc2978_data *data = to_ltc2978_data(info);
@@ -420,7 +450,7 @@ static int ltc3883_read_word_data(struct i2c_client *client, int page, int reg)
 		ret = 0;
 		break;
 	default:
-		ret = ltc3880_read_word_data(client, page, reg);
+		ret = ltc3880_read_word_data(client, page, phase, reg);
 		break;
 	}
 	return ret;
@@ -492,20 +522,30 @@ static int ltc2978_write_word_data(struct i2c_client *client, int page,
 }
 
 static const struct i2c_device_id ltc2978_id[] = {
+	{"ltc2972", ltc2972},
 	{"ltc2974", ltc2974},
 	{"ltc2975", ltc2975},
 	{"ltc2977", ltc2977},
 	{"ltc2978", ltc2978},
+	{"ltc2979", ltc2979},
 	{"ltc2980", ltc2980},
 	{"ltc3880", ltc3880},
 	{"ltc3882", ltc3882},
 	{"ltc3883", ltc3883},
+	{"ltc3884", ltc3884},
 	{"ltc3886", ltc3886},
 	{"ltc3887", ltc3887},
+	{"ltc3889", ltc3889},
+	{"ltc7880", ltc7880},
 	{"ltm2987", ltm2987},
+	{"ltm4664", ltm4664},
 	{"ltm4675", ltm4675},
 	{"ltm4676", ltm4676},
+	{"ltm4677", ltm4677},
+	{"ltm4678", ltm4678},
+	{"ltm4680", ltm4680},
 	{"ltm4686", ltm4686},
+	{"ltm4700", ltm4700},
 	{}
 };
 MODULE_DEVICE_TABLE(i2c, ltc2978_id);
@@ -555,7 +595,9 @@ static int ltc2978_get_id(struct i2c_client *client)
 
 	chip_id &= LTC2978_ID_MASK;
 
-	if (chip_id == LTC2974_ID)
+	if (chip_id == LTC2972_ID)
+		return ltc2972;
+	else if (chip_id == LTC2974_ID)
 		return ltc2974;
 	else if (chip_id == LTC2975_ID)
 		return ltc2975;
@@ -563,6 +605,8 @@ static int ltc2978_get_id(struct i2c_client *client)
 		return ltc2977;
 	else if (chip_id == LTC2978_ID_REV1 || chip_id == LTC2978_ID_REV2)
 		return ltc2978;
+	else if (chip_id == LTC2979_ID_A || chip_id == LTC2979_ID_B)
+		return ltc2979;
 	else if (chip_id == LTC2980_ID_A || chip_id == LTC2980_ID_B)
 		return ltc2980;
 	else if (chip_id == LTC3880_ID)
@@ -571,19 +615,35 @@ static int ltc2978_get_id(struct i2c_client *client)
 		return ltc3882;
 	else if (chip_id == LTC3883_ID)
 		return ltc3883;
+	else if (chip_id == LTC3884_ID)
+		return ltc3884;
 	else if (chip_id == LTC3886_ID)
 		return ltc3886;
 	else if (chip_id == LTC3887_ID)
 		return ltc3887;
+	else if (chip_id == LTC3889_ID)
+		return ltc3889;
+	else if (chip_id == LTC7880_ID)
+		return ltc7880;
 	else if (chip_id == LTM2987_ID_A || chip_id == LTM2987_ID_B)
 		return ltm2987;
+	else if (chip_id == LTM4664_ID)
+		return ltm4664;
 	else if (chip_id == LTM4675_ID)
 		return ltm4675;
 	else if (chip_id == LTM4676_ID_REV1 || chip_id == LTM4676_ID_REV2 ||
 		 chip_id == LTM4676A_ID)
 		return ltm4676;
+	else if (chip_id == LTM4677_ID_REV1 || chip_id == LTM4677_ID_REV2)
+		return ltm4677;
+	else if (chip_id == LTM4678_ID_REV1 || chip_id == LTM4678_ID_REV2)
+		return ltm4678;
+	else if (chip_id == LTM4680_ID)
+		return ltm4680;
 	else if (chip_id == LTM4686_ID)
 		return ltm4686;
+	else if (chip_id == LTM4700_ID)
+		return ltm4700;
 
 	dev_err(&client->dev, "Unsupported chip ID 0x%x\n", chip_id);
 	return -ENODEV;
@@ -637,6 +697,19 @@ static int ltc2978_probe(struct i2c_client *client,
 	data->temp2_max = 0x7c00;
 
 	switch (data->id) {
+	case ltc2972:
+		info->read_word_data = ltc2975_read_word_data;
+		info->pages = LTC2972_NUM_PAGES;
+		info->func[0] = PMBUS_HAVE_IIN | PMBUS_HAVE_PIN
+		  | PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+		  | PMBUS_HAVE_TEMP2;
+		for (i = 0; i < info->pages; i++) {
+			info->func[i] |= PMBUS_HAVE_VOUT
+			  | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_POUT
+			  | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
+			  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
+		}
+		break;
 	case ltc2974:
 		info->read_word_data = ltc2974_read_word_data;
 		info->pages = LTC2974_NUM_PAGES;
@@ -662,8 +735,10 @@ static int ltc2978_probe(struct i2c_client *client,
 			  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
 		}
 		break;
+
 	case ltc2977:
 	case ltc2978:
+	case ltc2979:
 	case ltc2980:
 	case ltm2987:
 		info->read_word_data = ltc2978_read_word_data;
@@ -680,6 +755,7 @@ static int ltc2978_probe(struct i2c_client *client,
 	case ltc3887:
 	case ltm4675:
 	case ltm4676:
+	case ltm4677:
 	case ltm4686:
 		data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
 		info->read_word_data = ltc3880_read_word_data;
@@ -721,7 +797,14 @@ static int ltc2978_probe(struct i2c_client *client,
 		  | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
 		  | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
 		break;
+	case ltc3884:
 	case ltc3886:
+	case ltc3889:
+	case ltc7880:
+	case ltm4664:
+	case ltm4678:
+	case ltm4680:
+	case ltm4700:
 		data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
 		info->read_word_data = ltc3883_read_word_data;
 		info->pages = LTC3880_NUM_PAGES;
@@ -752,22 +835,33 @@ static int ltc2978_probe(struct i2c_client *client,
 	return pmbus_do_probe(client, id, info);
 }
 
+
 #ifdef CONFIG_OF
 static const struct of_device_id ltc2978_of_match[] = {
+	{ .compatible = "lltc,ltc2972" },
 	{ .compatible = "lltc,ltc2974" },
 	{ .compatible = "lltc,ltc2975" },
 	{ .compatible = "lltc,ltc2977" },
 	{ .compatible = "lltc,ltc2978" },
+	{ .compatible = "lltc,ltc2979" },
 	{ .compatible = "lltc,ltc2980" },
 	{ .compatible = "lltc,ltc3880" },
 	{ .compatible = "lltc,ltc3882" },
 	{ .compatible = "lltc,ltc3883" },
+	{ .compatible = "lltc,ltc3884" },
 	{ .compatible = "lltc,ltc3886" },
 	{ .compatible = "lltc,ltc3887" },
+	{ .compatible = "lltc,ltc3889" },
+	{ .compatible = "lltc,ltc7880" },
 	{ .compatible = "lltc,ltm2987" },
+	{ .compatible = "lltc,ltm4664" },
 	{ .compatible = "lltc,ltm4675" },
 	{ .compatible = "lltc,ltm4676" },
+	{ .compatible = "lltc,ltm4677" },
+	{ .compatible = "lltc,ltm4678" },
+	{ .compatible = "lltc,ltm4680" },
 	{ .compatible = "lltc,ltm4686" },
+	{ .compatible = "lltc,ltm4700" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ltc2978_of_match);

drivers/hwmon/pmbus/ltc3815.c

@@ -55,7 +55,7 @@ static int ltc3815_write_byte(struct i2c_client *client, int page, u8 reg)
 		 * LTC3815 does not support the CLEAR_FAULTS command.
 		 * Emulate it by clearing the status register.
 		 */
-		ret = pmbus_read_word_data(client, 0, PMBUS_STATUS_WORD);
+		ret = pmbus_read_word_data(client, 0, 0xff, PMBUS_STATUS_WORD);
 		if (ret > 0) {
 			pmbus_write_word_data(client, 0, PMBUS_STATUS_WORD,
 					      ret);
@@ -69,25 +69,31 @@ static int ltc3815_write_byte(struct i2c_client *client, int page, u8 reg)
 	return ret;
 }
 
-static int ltc3815_read_word_data(struct i2c_client *client, int page, int reg)
+static int ltc3815_read_word_data(struct i2c_client *client, int page,
+				  int phase, int reg)
 {
 	int ret;
 
 	switch (reg) {
 	case PMBUS_VIRT_READ_VIN_MAX:
-		ret = pmbus_read_word_data(client, page, LTC3815_MFR_VIN_PEAK);
+		ret = pmbus_read_word_data(client, page, phase,
+					   LTC3815_MFR_VIN_PEAK);
 		break;
 	case PMBUS_VIRT_READ_VOUT_MAX:
-		ret = pmbus_read_word_data(client, page, LTC3815_MFR_VOUT_PEAK);
+		ret = pmbus_read_word_data(client, page, phase,
+					   LTC3815_MFR_VOUT_PEAK);
 		break;
 	case PMBUS_VIRT_READ_TEMP_MAX:
-		ret = pmbus_read_word_data(client, page, LTC3815_MFR_TEMP_PEAK);
+		ret = pmbus_read_word_data(client, page, phase,
+					   LTC3815_MFR_TEMP_PEAK);
 		break;
 	case PMBUS_VIRT_READ_IOUT_MAX:
-		ret = pmbus_read_word_data(client, page, LTC3815_MFR_IOUT_PEAK);
+		ret = pmbus_read_word_data(client, page, phase,
+					   LTC3815_MFR_IOUT_PEAK);
 		break;
 	case PMBUS_VIRT_READ_IIN_MAX:
-		ret = pmbus_read_word_data(client, page, LTC3815_MFR_IIN_PEAK);
+		ret = pmbus_read_word_data(client, page, phase,
+					   LTC3815_MFR_IIN_PEAK);
 		break;
 	case PMBUS_VIRT_RESET_VOUT_HISTORY:
 	case PMBUS_VIRT_RESET_VIN_HISTORY:

drivers/hwmon/pmbus/max16064.c

@@ -15,17 +15,18 @@
 #define MAX16064_MFR_VOUT_PEAK		0xd4
 #define MAX16064_MFR_TEMPERATURE_PEAK	0xd6
 
-static int max16064_read_word_data(struct i2c_client *client, int page, int reg)
+static int max16064_read_word_data(struct i2c_client *client, int page,
+				   int phase, int reg)
 {
 	int ret;
 
 	switch (reg) {
 	case PMBUS_VIRT_READ_VOUT_MAX:
-		ret = pmbus_read_word_data(client, page,
+		ret = pmbus_read_word_data(client, page, phase,
 					   MAX16064_MFR_VOUT_PEAK);
 		break;
 	case PMBUS_VIRT_READ_TEMP_MAX:
-		ret = pmbus_read_word_data(client, page,
+		ret = pmbus_read_word_data(client, page, phase,
 					   MAX16064_MFR_TEMPERATURE_PEAK);
 		break;
 	case PMBUS_VIRT_RESET_VOUT_HISTORY:

drivers/hwmon/pmbus/max20730.c

@@ -85,7 +85,8 @@ static u32 max_current[][5] = {
 	[max20743] = { 18900, 24100, 29200, 34100 },
 };
 
-static int max20730_read_word_data(struct i2c_client *client, int page, int reg)
+static int max20730_read_word_data(struct i2c_client *client, int page,
+				   int phase, int reg)
 {
 	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
 	const struct max20730_data *data = to_max20730_data(info);

drivers/hwmon/pmbus/max31785.c

@@ -72,7 +72,7 @@ static int max31785_read_long_data(struct i2c_client *client, int page,
 
 	cmdbuf[0] = reg;
 
-	rc = pmbus_set_page(client, page);
+	rc = pmbus_set_page(client, page, 0xff);
 	if (rc < 0)
 		return rc;
 
@@ -110,7 +110,7 @@ static int max31785_get_pwm_mode(struct i2c_client *client, int page)
 	if (config < 0)
 		return config;
 
-	command = pmbus_read_word_data(client, page, PMBUS_FAN_COMMAND_1);
+	command = pmbus_read_word_data(client, page, 0xff, PMBUS_FAN_COMMAND_1);
 	if (command < 0)
 		return command;
 
@@ -126,7 +126,7 @@ static int max31785_get_pwm_mode(struct i2c_client *client, int page)
 }
 
 static int max31785_read_word_data(struct i2c_client *client, int page,
-				   int reg)
+				   int phase, int reg)
 {
 	u32 val;
 	int rv;

drivers/hwmon/pmbus/max34440.c

@@ -41,7 +41,8 @@ struct max34440_data {
 
 #define to_max34440_data(x)  container_of(x, struct max34440_data, info)
 
-static int max34440_read_word_data(struct i2c_client *client, int page, int reg)
+static int max34440_read_word_data(struct i2c_client *client, int page,
+				   int phase, int reg)
 {
 	int ret;
 	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
@@ -49,44 +50,44 @@ static int max34440_read_word_data(struct i2c_client *client, int page, int reg)
 
 	switch (reg) {
 	case PMBUS_VIRT_READ_VOUT_MIN:
-		ret = pmbus_read_word_data(client, page,
+		ret = pmbus_read_word_data(client, page, phase,
 					   MAX34440_MFR_VOUT_MIN);
 		break;
 	case PMBUS_VIRT_READ_VOUT_MAX:
-		ret = pmbus_read_word_data(client, page,
+		ret = pmbus_read_word_data(client, page, phase,
 					   MAX34440_MFR_VOUT_PEAK);
 		break;
 	case PMBUS_VIRT_READ_IOUT_AVG:
 		if (data->id != max34446 && data->id != max34451)
 			return -ENXIO;
-		ret = pmbus_read_word_data(client, page,
+		ret = pmbus_read_word_data(client, page, phase,
 					   MAX34446_MFR_IOUT_AVG);
 		break;
 	case PMBUS_VIRT_READ_IOUT_MAX:
-		ret = pmbus_read_word_data(client, page,
+		ret = pmbus_read_word_data(client, page, phase,
 					   MAX34440_MFR_IOUT_PEAK);
 		break;
 	case PMBUS_VIRT_READ_POUT_AVG:
 		if (data->id != max34446)
 			return -ENXIO;
-		ret = pmbus_read_word_data(client, page,
+		ret = pmbus_read_word_data(client, page, phase,
 					   MAX34446_MFR_POUT_AVG);
 		break;
 	case PMBUS_VIRT_READ_POUT_MAX:
 		if (data->id != max34446)
 			return -ENXIO;
-		ret = pmbus_read_word_data(client, page,
+		ret = pmbus_read_word_data(client, page, phase,
 					   MAX34446_MFR_POUT_PEAK);
 		break;
 	case PMBUS_VIRT_READ_TEMP_AVG:
 		if (data->id != max34446 && data->id != max34460 &&
 		    data->id != max34461)
 			return -ENXIO;
-		ret = pmbus_read_word_data(client, page,
+		ret = pmbus_read_word_data(client, page, phase,
 					   MAX34446_MFR_TEMPERATURE_AVG);
 		break;
 	case PMBUS_VIRT_READ_TEMP_MAX:
-		ret = pmbus_read_word_data(client, page,
+		ret = pmbus_read_word_data(client, page, phase,
 					   MAX34440_MFR_TEMPERATURE_PEAK);
 		break;
 	case PMBUS_VIRT_RESET_POUT_HISTORY:
@@ -159,14 +160,14 @@ static int max34440_read_byte_data(struct i2c_client *client, int page, int reg)
 	int mfg_status;
 
 	if (page >= 0) {
-		ret = pmbus_set_page(client, page);
+		ret = pmbus_set_page(client, page, 0xff);
 		if (ret < 0)
 			return ret;
 	}
 
 	switch (reg) {
 	case PMBUS_STATUS_IOUT:
-		mfg_status = pmbus_read_word_data(client, 0,
+		mfg_status = pmbus_read_word_data(client, 0, 0xff,
 						  PMBUS_STATUS_MFR_SPECIFIC);
 		if (mfg_status < 0)
 			return mfg_status;
@@ -176,7 +177,7 @@ static int max34440_read_byte_data(struct i2c_client *client, int page, int reg)
 			ret |= PB_IOUT_OC_FAULT;
 		break;
 	case PMBUS_STATUS_TEMPERATURE:
-		mfg_status = pmbus_read_word_data(client, 0,
+		mfg_status = pmbus_read_word_data(client, 0, 0xff,
 						  PMBUS_STATUS_MFR_SPECIFIC);
 		if (mfg_status < 0)
 			return mfg_status;

drivers/hwmon/pmbus/max8688.c

@@ -28,7 +28,8 @@
 #define MAX8688_STATUS_OT_FAULT		BIT(13)
 #define MAX8688_STATUS_OT_WARNING	BIT(14)
 
-static int max8688_read_word_data(struct i2c_client *client, int page, int reg)
+static int max8688_read_word_data(struct i2c_client *client, int page,
+				  int phase, int reg)
 {
 	int ret;
 
@@ -37,13 +38,15 @@ static int max8688_read_word_data(struct i2c_client *client, int page, int reg)
 
 	switch (reg) {
 	case PMBUS_VIRT_READ_VOUT_MAX:
-		ret = pmbus_read_word_data(client, 0, MAX8688_MFR_VOUT_PEAK);
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   MAX8688_MFR_VOUT_PEAK);
 		break;
 	case PMBUS_VIRT_READ_IOUT_MAX:
-		ret = pmbus_read_word_data(client, 0, MAX8688_MFR_IOUT_PEAK);
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   MAX8688_MFR_IOUT_PEAK);
 		break;
 	case PMBUS_VIRT_READ_TEMP_MAX:
-		ret = pmbus_read_word_data(client, 0,
+		ret = pmbus_read_word_data(client, 0, 0xff,
 					   MAX8688_MFR_TEMPERATURE_PEAK);
 		break;
 	case PMBUS_VIRT_RESET_VOUT_HISTORY:
@@ -94,7 +97,7 @@ static int max8688_read_byte_data(struct i2c_client *client, int page, int reg)
 
 	switch (reg) {
 	case PMBUS_STATUS_VOUT:
-		mfg_status = pmbus_read_word_data(client, 0,
+		mfg_status = pmbus_read_word_data(client, 0, 0xff,
 						  MAX8688_MFG_STATUS);
 		if (mfg_status < 0)
 			return mfg_status;
@@ -108,7 +111,7 @@ static int max8688_read_byte_data(struct i2c_client *client, int page, int reg)
 			ret |= PB_VOLTAGE_OV_FAULT;
 		break;
 	case PMBUS_STATUS_IOUT:
-		mfg_status = pmbus_read_word_data(client, 0,
+		mfg_status = pmbus_read_word_data(client, 0, 0xff,
 						  MAX8688_MFG_STATUS);
 		if (mfg_status < 0)
 			return mfg_status;
@@ -120,7 +123,7 @@ static int max8688_read_byte_data(struct i2c_client *client, int page, int reg)
 			ret |= PB_IOUT_OC_FAULT;
 		break;
 	case PMBUS_STATUS_TEMPERATURE:
-		mfg_status = pmbus_read_word_data(client, 0,
+		mfg_status = pmbus_read_word_data(client, 0, 0xff,
 						  MAX8688_MFG_STATUS);
 		if (mfg_status < 0)
 			return mfg_status;

drivers/hwmon/pmbus/pmbus.c

@@ -102,10 +102,10 @@ static int pmbus_identify(struct i2c_client *client,
 			int page;
 
 			for (page = 1; page < PMBUS_PAGES; page++) {
-				if (pmbus_set_page(client, page) < 0)
+				if (pmbus_set_page(client, page, 0xff) < 0)
 					break;
 			}
-			pmbus_set_page(client, 0);
+			pmbus_set_page(client, 0, 0xff);
 			info->pages = page;
 		} else {
 			info->pages = 1;

drivers/hwmon/pmbus/pmbus.h

@@ -119,6 +119,9 @@ enum pmbus_regs {
 	PMBUS_MFR_DATE			= 0x9D,
 	PMBUS_MFR_SERIAL		= 0x9E,
 
+	PMBUS_IC_DEVICE_ID		= 0xAD,
+	PMBUS_IC_DEVICE_REV		= 0xAE,
+
 /*
  * Virtual registers.
  * Useful to support attributes which are not supported by standard PMBus
@@ -359,6 +362,7 @@ enum pmbus_sensor_classes {
 };
 
 #define PMBUS_PAGES	32	/* Per PMBus specification */
+#define PMBUS_PHASES	8	/* Maximum number of phases per page */
 
 /* Functionality bit mask */
 #define PMBUS_HAVE_VIN		BIT(0)
@@ -385,13 +389,15 @@ enum pmbus_sensor_classes {
 #define PMBUS_HAVE_PWM34	BIT(21)
 #define PMBUS_HAVE_SAMPLES	BIT(22)
 
-#define PMBUS_PAGE_VIRTUAL	BIT(31)
+#define PMBUS_PHASE_VIRTUAL	BIT(30)	/* Phases on this page are virtual */
+#define PMBUS_PAGE_VIRTUAL	BIT(31)	/* Page is virtual */
 
 enum pmbus_data_format { linear = 0, direct, vid };
 enum vrm_version { vr11 = 0, vr12, vr13, imvp9, amd625mv };
 
 struct pmbus_driver_info {
 	int pages;		/* Total number of pages */
+	u8 phases[PMBUS_PAGES];	/* Number of phases per page */
 	enum pmbus_data_format format[PSC_NUM_CLASSES];
 	enum vrm_version vrm_version[PMBUS_PAGES]; /* vrm version per page */
 	/*
@@ -403,6 +409,7 @@ struct pmbus_driver_info {
 	int R[PSC_NUM_CLASSES];	/* exponent */
 
 	u32 func[PMBUS_PAGES];	/* Functionality, per page */
+	u32 pfunc[PMBUS_PHASES];/* Functionality, per phase */
 	/*
 	 * The following functions map manufacturing specific register values
 	 * to PMBus standard register values. Specify only if mapping is
@@ -415,7 +422,8 @@ struct pmbus_driver_info {
 	 * the standard register.
 	 */
 	int (*read_byte_data)(struct i2c_client *client, int page, int reg);
-	int (*read_word_data)(struct i2c_client *client, int page, int reg);
+	int (*read_word_data)(struct i2c_client *client, int page, int phase,
+			      int reg);
 	int (*write_word_data)(struct i2c_client *client, int page, int reg,
 			       u16 word);
 	int (*write_byte)(struct i2c_client *client, int page, u8 value);
@@ -454,9 +462,11 @@ extern const struct regulator_ops pmbus_regulator_ops;
 /* Function declarations */
 
 void pmbus_clear_cache(struct i2c_client *client);
-int pmbus_set_page(struct i2c_client *client, int page);
-int pmbus_read_word_data(struct i2c_client *client, int page, u8 reg);
-int pmbus_write_word_data(struct i2c_client *client, int page, u8 reg, u16 word);
+int pmbus_set_page(struct i2c_client *client, int page, int phase);
+int pmbus_read_word_data(struct i2c_client *client, int page, int phase,
+			 u8 reg);
+int pmbus_write_word_data(struct i2c_client *client, int page, u8 reg,
+			  u16 word);
 int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg);
 int pmbus_write_byte(struct i2c_client *client, int page, u8 value);
 int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg,

drivers/hwmon/pmbus/pmbus_core.c

@@ -49,6 +49,7 @@ struct pmbus_sensor {
 	char name[PMBUS_NAME_SIZE];	/* sysfs sensor name */
 	struct device_attribute attribute;
 	u8 page;		/* page number */
+	u8 phase;		/* phase number, 0xff for all phases */
 	u16 reg;		/* register */
 	enum pmbus_sensor_classes class;	/* sensor class */
 	bool update;		/* runtime sensor update needed */
@@ -109,6 +110,7 @@ struct pmbus_data {
 	int (*read_status)(struct i2c_client *client, int page);
 
 	u8 currpage;
+	u8 currphase;	/* current phase, 0xff for all */
 };
 
 struct pmbus_debugfs_entry {
@@ -146,15 +148,16 @@ void pmbus_clear_cache(struct i2c_client *client)
 }
 EXPORT_SYMBOL_GPL(pmbus_clear_cache);
 
-int pmbus_set_page(struct i2c_client *client, int page)
+int pmbus_set_page(struct i2c_client *client, int page, int phase)
 {
 	struct pmbus_data *data = i2c_get_clientdata(client);
 	int rv;
 
-	if (page < 0 || page == data->currpage)
+	if (page < 0)
 		return 0;
 
-	if (!(data->info->func[page] & PMBUS_PAGE_VIRTUAL)) {
+	if (!(data->info->func[page] & PMBUS_PAGE_VIRTUAL) &&
+	    data->info->pages > 1 && page != data->currpage) {
 		rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page);
 		if (rv < 0)
 			return rv;
@@ -166,9 +169,17 @@ int pmbus_set_page(struct i2c_client *client, int page)
 		if (rv != page)
 			return -EIO;
 	}
-
 	data->currpage = page;
 
+	if (data->info->phases[page] && data->currphase != phase &&
+	    !(data->info->func[page] & PMBUS_PHASE_VIRTUAL)) {
+		rv = i2c_smbus_write_byte_data(client, PMBUS_PHASE,
+					       phase);
+		if (rv)
+			return rv;
+	}
+	data->currphase = phase;
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(pmbus_set_page);
@@ -177,7 +188,7 @@ int pmbus_write_byte(struct i2c_client *client, int page, u8 value)
 {
 	int rv;
 
-	rv = pmbus_set_page(client, page);
+	rv = pmbus_set_page(client, page, 0xff);
 	if (rv < 0)
 		return rv;
 
@@ -208,7 +219,7 @@ int pmbus_write_word_data(struct i2c_client *client, int page, u8 reg,
 {
 	int rv;
 
-	rv = pmbus_set_page(client, page);
+	rv = pmbus_set_page(client, page, 0xff);
 	if (rv < 0)
 		return rv;
 
@@ -286,11 +297,11 @@ int pmbus_update_fan(struct i2c_client *client, int page, int id,
 }
 EXPORT_SYMBOL_GPL(pmbus_update_fan);
 
-int pmbus_read_word_data(struct i2c_client *client, int page, u8 reg)
+int pmbus_read_word_data(struct i2c_client *client, int page, int phase, u8 reg)
 {
 	int rv;
 
-	rv = pmbus_set_page(client, page);
+	rv = pmbus_set_page(client, page, phase);
 	if (rv < 0)
 		return rv;
 
@@ -320,14 +331,15 @@ static int pmbus_read_virt_reg(struct i2c_client *client, int page, int reg)
  * _pmbus_read_word_data() is similar to pmbus_read_word_data(), but checks if
  * a device specific mapping function exists and calls it if necessary.
  */
-static int _pmbus_read_word_data(struct i2c_client *client, int page, int reg)
+static int _pmbus_read_word_data(struct i2c_client *client, int page,
+				 int phase, int reg)
 {
 	struct pmbus_data *data = i2c_get_clientdata(client);
 	const struct pmbus_driver_info *info = data->info;
 	int status;
 
 	if (info->read_word_data) {
-		status = info->read_word_data(client, page, reg);
+		status = info->read_word_data(client, page, phase, reg);
 		if (status != -ENODATA)
 			return status;
 	}
@@ -335,14 +347,20 @@ static int _pmbus_read_word_data(struct i2c_client *client, int page, int reg)
 	if (reg >= PMBUS_VIRT_BASE)
 		return pmbus_read_virt_reg(client, page, reg);
 
-	return pmbus_read_word_data(client, page, reg);
+	return pmbus_read_word_data(client, page, phase, reg);
+}
+
+/* Same as above, but without phase parameter, for use in check functions */
+static int __pmbus_read_word_data(struct i2c_client *client, int page, int reg)
+{
+	return _pmbus_read_word_data(client, page, 0xff, reg);
 }
 
 int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg)
 {
 	int rv;
 
-	rv = pmbus_set_page(client, page);
+	rv = pmbus_set_page(client, page, 0xff);
 	if (rv < 0)
 		return rv;
 
@@ -354,7 +372,7 @@ int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg, u8 value)
 {
 	int rv;
 
-	rv = pmbus_set_page(client, page);
+	rv = pmbus_set_page(client, page, 0xff);
 	if (rv < 0)
 		return rv;
 
@@ -440,7 +458,7 @@ static int pmbus_get_fan_rate(struct i2c_client *client, int page, int id,
 
 	have_rpm = !!(config & pmbus_fan_rpm_mask[id]);
 	if (want_rpm == have_rpm)
-		return pmbus_read_word_data(client, page,
+		return pmbus_read_word_data(client, page, 0xff,
 					    pmbus_fan_command_registers[id]);
 
 	/* Can't sensibly map between RPM and PWM, just return zero */
@@ -530,7 +548,7 @@ EXPORT_SYMBOL_GPL(pmbus_check_byte_register);
 
 bool pmbus_check_word_register(struct i2c_client *client, int page, int reg)
 {
-	return pmbus_check_register(client, _pmbus_read_word_data, page, reg);
+	return pmbus_check_register(client, __pmbus_read_word_data, page, reg);
 }
 EXPORT_SYMBOL_GPL(pmbus_check_word_register);
 
@@ -595,6 +613,7 @@ static struct pmbus_data *pmbus_update_device(struct device *dev)
 				sensor->data
 				    = _pmbus_read_word_data(client,
 							    sensor->page,
+							    sensor->phase,
 							    sensor->reg);
 		}
 		pmbus_clear_faults(client);
@@ -1076,7 +1095,8 @@ static int pmbus_add_boolean(struct pmbus_data *data,
 
 static struct pmbus_sensor *pmbus_add_sensor(struct pmbus_data *data,
 					     const char *name, const char *type,
-					     int seq, int page, int reg,
+					     int seq, int page, int phase,
+					     int reg,
 					     enum pmbus_sensor_classes class,
 					     bool update, bool readonly,
 					     bool convert)
@@ -1100,6 +1120,7 @@ static struct pmbus_sensor *pmbus_add_sensor(struct pmbus_data *data,
 		readonly = true;
 
 	sensor->page = page;
+	sensor->phase = phase;
 	sensor->reg = reg;
 	sensor->class = class;
 	sensor->update = update;
@@ -1119,7 +1140,7 @@ static struct pmbus_sensor *pmbus_add_sensor(struct pmbus_data *data,
 
 static int pmbus_add_label(struct pmbus_data *data,
 			   const char *name, int seq,
-			   const char *lstring, int index)
+			   const char *lstring, int index, int phase)
 {
 	struct pmbus_label *label;
 	struct device_attribute *a;
@@ -1131,11 +1152,21 @@ static int pmbus_add_label(struct pmbus_data *data,
 	a = &label->attribute;
 
 	snprintf(label->name, sizeof(label->name), "%s%d_label", name, seq);
-	if (!index)
-		strncpy(label->label, lstring, sizeof(label->label) - 1);
+	if (!index) {
+		if (phase == 0xff)
+			strncpy(label->label, lstring,
+				sizeof(label->label) - 1);
+		else
+			snprintf(label->label, sizeof(label->label), "%s.%d",
+				 lstring, phase);
+	} else {
+		if (phase == 0xff)
+			snprintf(label->label, sizeof(label->label), "%s%d",
+				 lstring, index);
 		else
-		snprintf(label->label, sizeof(label->label), "%s%d", lstring,
-			 index);
+			snprintf(label->label, sizeof(label->label), "%s%d.%d",
+				 lstring, index, phase);
+	}
 
 	pmbus_dev_attr_init(a, label->name, 0444, pmbus_show_label, NULL);
 	return pmbus_add_attribute(data, &a->attr);
@@ -1200,7 +1231,7 @@ static int pmbus_add_limit_attrs(struct i2c_client *client,
 	for (i = 0; i < nlimit; i++) {
 		if (pmbus_check_word_register(client, page, l->reg)) {
 			curr = pmbus_add_sensor(data, name, l->attr, index,
-						page, l->reg, attr->class,
+						page, 0xff, l->reg, attr->class,
 						attr->update || l->update,
 						false, true);
 			if (!curr)
@@ -1227,7 +1258,7 @@ static int pmbus_add_sensor_attrs_one(struct i2c_client *client,
 				      struct pmbus_data *data,
 				      const struct pmbus_driver_info *info,
 				      const char *name,
-				      int index, int page,
+				      int index, int page, int phase,
 				      const struct pmbus_sensor_attr *attr,
 				      bool paged)
 {
@@ -1237,15 +1268,16 @@ static int pmbus_add_sensor_attrs_one(struct i2c_client *client,
 
 	if (attr->label) {
 		ret = pmbus_add_label(data, name, index, attr->label,
-				      paged ? page + 1 : 0);
+				      paged ? page + 1 : 0, phase);
 		if (ret)
 			return ret;
 	}
-	base = pmbus_add_sensor(data, name, "input", index, page, attr->reg,
-				attr->class, true, true, true);
+	base = pmbus_add_sensor(data, name, "input", index, page, phase,
+				attr->reg, attr->class, true, true, true);
 	if (!base)
 		return -ENOMEM;
-	if (attr->sfunc) {
+	/* No limit and alarm attributes for phase specific sensors */
+	if (attr->sfunc && phase == 0xff) {
 		ret = pmbus_add_limit_attrs(client, data, info, name,
 					    index, page, base, attr);
 		if (ret < 0)
@@ -1315,11 +1347,26 @@ static int pmbus_add_sensor_attrs(struct i2c_client *client,
 				continue;
 			ret = pmbus_add_sensor_attrs_one(client, data, info,
 							 name, index, page,
-							 attrs, paged);
+							 0xff, attrs, paged);
+			if (ret)
+				return ret;
+			index++;
+			if (info->phases[page]) {
+				int phase;
+
+				for (phase = 0; phase < info->phases[page];
+				     phase++) {
+					if (!(info->pfunc[phase] & attrs->func))
+						continue;
+					ret = pmbus_add_sensor_attrs_one(client,
+						data, info, name, index, page,
+						phase, attrs, paged);
 					if (ret)
 						return ret;
 					index++;
 				}
+			}
+		}
 		attrs++;
 	}
 	return 0;
@@ -1822,7 +1869,7 @@ static int pmbus_add_fan_ctrl(struct i2c_client *client,
 	struct pmbus_sensor *sensor;
 
 	sensor = pmbus_add_sensor(data, "fan", "target", index, page,
-				  PMBUS_VIRT_FAN_TARGET_1 + id, PSC_FAN,
+				  PMBUS_VIRT_FAN_TARGET_1 + id, 0xff, PSC_FAN,
 				  false, false, true);
 
 	if (!sensor)
@@ -1833,14 +1880,14 @@ static int pmbus_add_fan_ctrl(struct i2c_client *client,
 		return 0;
 
 	sensor = pmbus_add_sensor(data, "pwm", NULL, index, page,
-				  PMBUS_VIRT_PWM_1 + id, PSC_PWM,
+				  PMBUS_VIRT_PWM_1 + id, 0xff, PSC_PWM,
 				  false, false, true);
 
 	if (!sensor)
 		return -ENOMEM;
 
 	sensor = pmbus_add_sensor(data, "pwm", "enable", index, page,
-				  PMBUS_VIRT_PWM_ENABLE_1 + id, PSC_PWM,
+				  PMBUS_VIRT_PWM_ENABLE_1 + id, 0xff, PSC_PWM,
 				  true, false, false);
 
 	if (!sensor)
@@ -1882,7 +1929,7 @@ static int pmbus_add_fan_attributes(struct i2c_client *client,
 				continue;
 
 			if (pmbus_add_sensor(data, "fan", "input", index,
-					     page, pmbus_fan_registers[f],
+					     page, pmbus_fan_registers[f], 0xff,
 					     PSC_FAN, true, true, true) == NULL)
 				return -ENOMEM;
 
@@ -1964,7 +2011,7 @@ static ssize_t pmbus_show_samples(struct device *dev,
 	struct i2c_client *client = to_i2c_client(dev->parent);
 	struct pmbus_samples_reg *reg = to_samples_reg(devattr);
 
-	val = _pmbus_read_word_data(client, reg->page, reg->attr->reg);
+	val = _pmbus_read_word_data(client, reg->page, 0xff, reg->attr->reg);
 	if (val < 0)
 		return val;
 
@@ -2120,7 +2167,7 @@ static int pmbus_read_status_byte(struct i2c_client *client, int page)
 
 static int pmbus_read_status_word(struct i2c_client *client, int page)
 {
-	return _pmbus_read_word_data(client, page, PMBUS_STATUS_WORD);
+	return _pmbus_read_word_data(client, page, 0xff, PMBUS_STATUS_WORD);
 }
 
 static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data,
@@ -2482,6 +2529,8 @@ int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id,
 	if (pdata)
 		data->flags = pdata->flags;
 	data->info = info;
+	data->currpage = 0xff;
+	data->currphase = 0xfe;
 
 	ret = pmbus_init_common(client, data, info);
 	if (ret < 0)

drivers/hwmon/pmbus/tps53679.c

@@ -6,13 +6,21 @@
  * Copyright (c) 2017 Vadim Pasternak <vadimp@mellanox.com>
  */
 
+#include <linux/bits.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include "pmbus.h"
 
+enum chips {
+	tps53647, tps53667, tps53679, tps53681, tps53688
+};
+
+#define TPS53647_PAGE_NUM		1
+
 #define TPS53679_PROT_VR12_5MV		0x01 /* VR12.0 mode, 5-mV DAC */
 #define TPS53679_PROT_VR12_5_10MV	0x02 /* VR12.5 mode, 10-mV DAC */
 #define TPS53679_PROT_VR13_10MV		0x04 /* VR13.0 mode, 10-mV DAC */
@@ -20,13 +28,19 @@
 #define TPS53679_PROT_VR13_5MV		0x07 /* VR13.0 mode, 5-mV DAC */
 #define TPS53679_PAGE_NUM		2
 
-static int tps53679_identify(struct i2c_client *client,
+#define TPS53681_DEVICE_ID		0x81
+
+#define TPS53681_PMBUS_REVISION		0x33
+
+#define TPS53681_MFR_SPECIFIC_20	0xe4	/* Number of phases, per page */
+
+static int tps53679_identify_mode(struct i2c_client *client,
 				  struct pmbus_driver_info *info)
 {
 	u8 vout_params;
 	int i, ret;
 
-	for (i = 0; i < TPS53679_PAGE_NUM; i++) {
+	for (i = 0; i < info->pages; i++) {
 		/* Read the register with VOUT scaling value.*/
 		ret = pmbus_read_byte_data(client, i, PMBUS_VOUT_MODE);
 		if (ret < 0)
@@ -52,48 +66,180 @@ static int tps53679_identify(struct i2c_client *client,
 	return 0;
 }
 
+static int tps53679_identify_phases(struct i2c_client *client,
+				    struct pmbus_driver_info *info)
+{
+	int ret;
+
+	/* On TPS53681, only channel A provides per-phase output current */
+	ret = pmbus_read_byte_data(client, 0, TPS53681_MFR_SPECIFIC_20);
+	if (ret < 0)
+		return ret;
+	info->phases[0] = (ret & 0x07) + 1;
+
+	return 0;
+}
+
+static int tps53679_identify_chip(struct i2c_client *client,
+				  u8 revision, u16 id)
+{
+	u8 buf[I2C_SMBUS_BLOCK_MAX];
+	int ret;
+
+	ret = pmbus_read_byte_data(client, 0, PMBUS_REVISION);
+	if (ret < 0)
+		return ret;
+	if (ret != revision) {
+		dev_err(&client->dev, "Unexpected PMBus revision 0x%x\n", ret);
+		return -ENODEV;
+	}
+
+	ret = i2c_smbus_read_block_data(client, PMBUS_IC_DEVICE_ID, buf);
+	if (ret < 0)
+		return ret;
+	if (ret != 1 || buf[0] != id) {
+		dev_err(&client->dev, "Unexpected device ID 0x%x\n", buf[0]);
+		return -ENODEV;
+	}
+	return 0;
+}
+
+/*
+ * Common identification function for chips with multi-phase support.
+ * Since those chips have special configuration registers, we want to have
+ * some level of reassurance that we are really talking with the chip
+ * being probed. Check PMBus revision and chip ID.
+ */
+static int tps53679_identify_multiphase(struct i2c_client *client,
+					struct pmbus_driver_info *info,
+					int pmbus_rev, int device_id)
+{
+	int ret;
+
+	ret = tps53679_identify_chip(client, pmbus_rev, device_id);
+	if (ret < 0)
+		return ret;
+
+	ret = tps53679_identify_mode(client, info);
+	if (ret < 0)
+		return ret;
+
+	return tps53679_identify_phases(client, info);
+}
+
+static int tps53679_identify(struct i2c_client *client,
+			     struct pmbus_driver_info *info)
+{
+	return tps53679_identify_mode(client, info);
+}
+
+static int tps53681_identify(struct i2c_client *client,
+			     struct pmbus_driver_info *info)
+{
+	return tps53679_identify_multiphase(client, info,
+					    TPS53681_PMBUS_REVISION,
+					    TPS53681_DEVICE_ID);
+}
+
+static int tps53681_read_word_data(struct i2c_client *client, int page,
+				   int phase, int reg)
+{
+	/*
+	 * For reading the total output current (READ_IOUT) for all phases,
+	 * the chip datasheet is a bit vague. It says "PHASE must be set to
+	 * FFh to access all phases simultaneously. PHASE may also be set to
+	 * 80h readack (!) the total phase current".
+	 * Experiments show that the command does _not_ report the total
+	 * current for all phases if the phase is set to 0xff. Instead, it
+	 * appears to report the current of one of the phases. Override phase
+	 * parameter with 0x80 when reading the total output current on page 0.
+	 */
+	if (reg == PMBUS_READ_IOUT && page == 0 && phase == 0xff)
+		return pmbus_read_word_data(client, page, 0x80, reg);
+	return -ENODATA;
+}
+
 static struct pmbus_driver_info tps53679_info = {
-	.pages = TPS53679_PAGE_NUM,
 	.format[PSC_VOLTAGE_IN] = linear,
 	.format[PSC_VOLTAGE_OUT] = vid,
 	.format[PSC_TEMPERATURE] = linear,
 	.format[PSC_CURRENT_OUT] = linear,
 	.format[PSC_POWER] = linear,
-	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_PIN |
+		PMBUS_HAVE_STATUS_INPUT |
+		PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
 		PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
 		PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
 		PMBUS_HAVE_POUT,
-	.func[1] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+	.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
 		PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
 		PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
 		PMBUS_HAVE_POUT,
-	.identify = tps53679_identify,
+	.pfunc[0] = PMBUS_HAVE_IOUT,
+	.pfunc[1] = PMBUS_HAVE_IOUT,
+	.pfunc[2] = PMBUS_HAVE_IOUT,
+	.pfunc[3] = PMBUS_HAVE_IOUT,
+	.pfunc[4] = PMBUS_HAVE_IOUT,
+	.pfunc[5] = PMBUS_HAVE_IOUT,
 };
 
 static int tps53679_probe(struct i2c_client *client,
 			  const struct i2c_device_id *id)
 {
+	struct device *dev = &client->dev;
 	struct pmbus_driver_info *info;
+	enum chips chip_id;
 
-	info = devm_kmemdup(&client->dev, &tps53679_info, sizeof(*info),
-			    GFP_KERNEL);
+	if (dev->of_node)
+		chip_id = (enum chips)of_device_get_match_data(dev);
+	else
+		chip_id = id->driver_data;
+
+	info = devm_kmemdup(dev, &tps53679_info, sizeof(*info), GFP_KERNEL);
 	if (!info)
 		return -ENOMEM;
 
+	switch (chip_id) {
+	case tps53647:
+	case tps53667:
+		info->pages = TPS53647_PAGE_NUM;
+		info->identify = tps53679_identify;
+		break;
+	case tps53679:
+	case tps53688:
+		info->pages = TPS53679_PAGE_NUM;
+		info->identify = tps53679_identify;
+		break;
+	case tps53681:
+		info->pages = TPS53679_PAGE_NUM;
+		info->phases[0] = 6;
+		info->identify = tps53681_identify;
+		info->read_word_data = tps53681_read_word_data;
+		break;
+	default:
+		return -ENODEV;
+	}
+
 	return pmbus_do_probe(client, id, info);
 }
 
 static const struct i2c_device_id tps53679_id[] = {
-	{"tps53679", 0},
-	{"tps53688", 0},
+	{"tps53647", tps53647},
+	{"tps53667", tps53667},
+	{"tps53679", tps53679},
+	{"tps53681", tps53681},
+	{"tps53688", tps53688},
 	{}
 };
 
 MODULE_DEVICE_TABLE(i2c, tps53679_id);
 
 static const struct of_device_id __maybe_unused tps53679_of_match[] = {
-	{.compatible = "ti,tps53679"},
-	{.compatible = "ti,tps53688"},
+	{.compatible = "ti,tps53647", .data = (void *)tps53647},
+	{.compatible = "ti,tps53667", .data = (void *)tps53667},
+	{.compatible = "ti,tps53679", .data = (void *)tps53679},
+	{.compatible = "ti,tps53681", .data = (void *)tps53681},
+	{.compatible = "ti,tps53688", .data = (void *)tps53688},
 	{}
 };
 MODULE_DEVICE_TABLE(of, tps53679_of_match);

drivers/hwmon/pmbus/ucd9000.c

@@ -370,7 +370,7 @@ static void ucd9000_probe_gpio(struct i2c_client *client,
 #ifdef CONFIG_DEBUG_FS
 static int ucd9000_get_mfr_status(struct i2c_client *client, u8 *buffer)
 {
-	int ret = pmbus_set_page(client, 0);
+	int ret = pmbus_set_page(client, 0, 0xff);
 
 	if (ret < 0)
 		return ret;

drivers/hwmon/pmbus/xdpe12284.c

@@ -18,7 +18,8 @@
 #define XDPE122_AMD_625MV		0x10 /* AMD mode 6.25mV */
 #define XDPE122_PAGE_NUM		2
 
-static int xdpe122_read_word_data(struct i2c_client *client, int page, int reg)
+static int xdpe122_read_word_data(struct i2c_client *client, int page,
+				  int phase, int reg)
 {
 	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
 	long val;
@@ -29,7 +30,7 @@ static int xdpe122_read_word_data(struct i2c_client *client, int page, int reg)
 	switch (reg) {
 	case PMBUS_VOUT_OV_FAULT_LIMIT:
 	case PMBUS_VOUT_UV_FAULT_LIMIT:
-		ret = pmbus_read_word_data(client, page, reg);
+		ret = pmbus_read_word_data(client, page, phase, reg);
 		if (ret < 0)
 			return ret;
 

drivers/hwmon/pmbus/zl6100.c

@@ -125,7 +125,8 @@ static inline void zl6100_wait(const struct zl6100_data *data)
 	}
 }
 
-static int zl6100_read_word_data(struct i2c_client *client, int page, int reg)
+static int zl6100_read_word_data(struct i2c_client *client, int page,
+				 int phase, int reg)
 {
 	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
 	struct zl6100_data *data = to_zl6100_data(info);
@@ -167,7 +168,7 @@ static int zl6100_read_word_data(struct i2c_client *client, int page, int reg)
 	}
 
 	zl6100_wait(data);
-	ret = pmbus_read_word_data(client, page, vreg);
+	ret = pmbus_read_word_data(client, page, phase, vreg);
 	data->access = ktime_get();
 	if (ret < 0)
 		return ret;