Commit 47babd4c authored by Jiri Slaby's avatar Jiri Slaby Committed by Linus Torvalds

Char: merge ip2main and ip2base

It's pretty useless to have one setup() function separated along with
module_init() which only calls a function from ip2main anyway. Get rid
of ip2base.

Remove also checks of always-true now.
Signed-off-by: default avatarJiri Slaby <jirislaby@gmail.com>
Signed-off-by: default avatarAlan Cox <alan@redhat.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 1361b7d3
...@@ -4,5 +4,5 @@ ...@@ -4,5 +4,5 @@
obj-$(CONFIG_COMPUTONE) += ip2.o obj-$(CONFIG_COMPUTONE) += ip2.o
ip2-objs := ip2base.o ip2main.o ip2-objs := ip2main.o
// ip2.c
// This is a dummy module to make the firmware available when needed
// and allows it to be unloaded when not. Rumor is the __initdata
// macro doesn't always works on all platforms so we use this kludge.
// If not compiled as a module it just makes fip_firm avaliable then
// __initdata should work as advertized
//
#include <linux/module.h>
#include <linux/init.h>
#include <linux/wait.h>
#ifndef __init
#define __init
#endif
#ifndef __initfunc
#define __initfunc(a) a
#endif
#ifndef __initdata
#define __initdata
#endif
#include "ip2types.h"
int
ip2_loadmain(int *, int *); // ref into ip2main.c
/* Note: Add compiled in defaults to these arrays, not to the structure
in ip2.h any longer. That structure WILL get overridden
by these values, or command line values, or insmod values!!! =mhw=
*/
static int io[IP2_MAX_BOARDS]= { 0, 0, 0, 0 };
static int irq[IP2_MAX_BOARDS] = { -1, -1, -1, -1 };
static int poll_only = 0;
MODULE_AUTHOR("Doug McNash");
MODULE_DESCRIPTION("Computone IntelliPort Plus Driver");
module_param_array(irq, int, NULL, 0);
MODULE_PARM_DESC(irq,"Interrupts for IntelliPort Cards");
module_param_array(io, int, NULL, 0);
MODULE_PARM_DESC(io,"I/O ports for IntelliPort Cards");
module_param(poll_only, bool, 0);
MODULE_PARM_DESC(poll_only,"Do not use card interrupts");
static int __init ip2_init(void)
{
if( poll_only ) {
/* Hard lock the interrupts to zero */
irq[0] = irq[1] = irq[2] = irq[3] = 0;
}
return ip2_loadmain(io, irq);
}
module_init(ip2_init);
MODULE_LICENSE("GPL");
#ifndef MODULE
/******************************************************************************
* ip2_setup:
* str: kernel command line string
*
* Can't autoprobe the boards so user must specify configuration on
* kernel command line. Sane people build it modular but the others
* come here.
*
* Alternating pairs of io,irq for up to 4 boards.
* ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3
*
* io=0 => No board
* io=1 => PCI
* io=2 => EISA
* else => ISA I/O address
*
* irq=0 or invalid for ISA will revert to polling mode
*
* Any value = -1, do not overwrite compiled in value.
*
******************************************************************************/
static int __init ip2_setup(char *str)
{
int ints[10]; /* 4 boards, 2 parameters + 2 */
int i, j;
str = get_options (str, ARRAY_SIZE(ints), ints);
for( i = 0, j = 1; i < 4; i++ ) {
if( j > ints[0] ) {
break;
}
if( ints[j] >= 0 ) {
io[i] = ints[j];
}
j++;
if( j > ints[0] ) {
break;
}
if( ints[j] >= 0 ) {
irq[i] = ints[j];
}
j++;
}
return 1;
}
__setup("ip2=", ip2_setup);
#endif /* !MODULE */
...@@ -157,9 +157,6 @@ static char *pcVersion = "1.2.14"; ...@@ -157,9 +157,6 @@ static char *pcVersion = "1.2.14";
static char *pcDriver_name = "ip2"; static char *pcDriver_name = "ip2";
static char *pcIpl = "ip2ipl"; static char *pcIpl = "ip2ipl";
// cheezy kludge or genius - you decide?
int ip2_loadmain(int *, int *);
/***********************/ /***********************/
/* Function Prototypes */ /* Function Prototypes */
/***********************/ /***********************/
...@@ -287,6 +284,7 @@ static int tracewrap; ...@@ -287,6 +284,7 @@ static int tracewrap;
MODULE_AUTHOR("Doug McNash"); MODULE_AUTHOR("Doug McNash");
MODULE_DESCRIPTION("Computone IntelliPort Plus Driver"); MODULE_DESCRIPTION("Computone IntelliPort Plus Driver");
MODULE_LICENSE("GPL");
static int poll_only = 0; static int poll_only = 0;
...@@ -297,6 +295,22 @@ static int iindx; ...@@ -297,6 +295,22 @@ static int iindx;
static char rirqs[IP2_MAX_BOARDS]; static char rirqs[IP2_MAX_BOARDS];
static int Valid_Irqs[] = { 3, 4, 5, 7, 10, 11, 12, 15, 0}; static int Valid_Irqs[] = { 3, 4, 5, 7, 10, 11, 12, 15, 0};
/* Note: Add compiled in defaults to these arrays, not to the structure
in ip2.h any longer. That structure WILL get overridden
by these values, or command line values, or insmod values!!! =mhw=
*/
static int io[IP2_MAX_BOARDS];
static int irq[IP2_MAX_BOARDS] = { -1, -1, -1, -1 };
MODULE_AUTHOR("Doug McNash");
MODULE_DESCRIPTION("Computone IntelliPort Plus Driver");
module_param_array(irq, int, NULL, 0);
MODULE_PARM_DESC(irq, "Interrupts for IntelliPort Cards");
module_param_array(io, int, NULL, 0);
MODULE_PARM_DESC(io, "I/O ports for IntelliPort Cards");
module_param(poll_only, bool, 0);
MODULE_PARM_DESC(poll_only, "Do not use card interrupts");
/* for sysfs class support */ /* for sysfs class support */
static struct class *ip2_class; static struct class *ip2_class;
...@@ -494,8 +508,53 @@ static const struct firmware *ip2_request_firmware(void) ...@@ -494,8 +508,53 @@ static const struct firmware *ip2_request_firmware(void)
return fw; return fw;
} }
int #ifndef MODULE
ip2_loadmain(int *iop, int *irqp) /******************************************************************************
* ip2_setup:
* str: kernel command line string
*
* Can't autoprobe the boards so user must specify configuration on
* kernel command line. Sane people build it modular but the others
* come here.
*
* Alternating pairs of io,irq for up to 4 boards.
* ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3
*
* io=0 => No board
* io=1 => PCI
* io=2 => EISA
* else => ISA I/O address
*
* irq=0 or invalid for ISA will revert to polling mode
*
* Any value = -1, do not overwrite compiled in value.
*
******************************************************************************/
static int __init ip2_setup(char *str)
{
int j, ints[10]; /* 4 boards, 2 parameters + 2 */
unsigned int i;
str = get_options(str, ARRAY_SIZE(ints), ints);
for (i = 0, j = 1; i < 4; i++) {
if (j > ints[0])
break;
if (ints[j] >= 0)
io[i] = ints[j];
j++;
if (j > ints[0])
break;
if (ints[j] >= 0)
irq[i] = ints[j];
j++;
}
return 1;
}
__setup("ip2=", ip2_setup);
#endif /* !MODULE */
static int ip2_loadmain(void)
{ {
int i, j, box; int i, j, box;
int err = 0; int err = 0;
...@@ -505,6 +564,11 @@ ip2_loadmain(int *iop, int *irqp) ...@@ -505,6 +564,11 @@ ip2_loadmain(int *iop, int *irqp)
static struct pci_dev *pci_dev_i = NULL; static struct pci_dev *pci_dev_i = NULL;
const struct firmware *fw = NULL; const struct firmware *fw = NULL;
if (poll_only) {
/* Hard lock the interrupts to zero */
irq[0] = irq[1] = irq[2] = irq[3] = poll_only = 0;
}
ip2trace (ITRC_NO_PORT, ITRC_INIT, ITRC_ENTER, 0 ); ip2trace (ITRC_NO_PORT, ITRC_INIT, ITRC_ENTER, 0 );
/* process command line arguments to modprobe or /* process command line arguments to modprobe or
...@@ -512,14 +576,11 @@ ip2_loadmain(int *iop, int *irqp) ...@@ -512,14 +576,11 @@ ip2_loadmain(int *iop, int *irqp)
/* irqp and iop should ALWAYS be specified now... But we check /* irqp and iop should ALWAYS be specified now... But we check
them individually just to be sure, anyways... */ them individually just to be sure, anyways... */
for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
if (iop) { ip2config.addr[i] = io[i];
ip2config.addr[i] = iop[i]; if (irq[i] >= 0)
if (irqp) { ip2config.irq[i] = irq[i];
if( irqp[i] >= 0 ) { else
ip2config.irq[i] = irqp[i];
} else {
ip2config.irq[i] = 0; ip2config.irq[i] = 0;
}
// This is a little bit of a hack. If poll_only=1 on command // This is a little bit of a hack. If poll_only=1 on command
// line back in ip2.c OR all IRQs on all specified boards are // line back in ip2.c OR all IRQs on all specified boards are
// explicitly set to 0, then drop to poll only mode and override // explicitly set to 0, then drop to poll only mode and override
...@@ -531,9 +592,7 @@ ip2_loadmain(int *iop, int *irqp) ...@@ -531,9 +592,7 @@ ip2_loadmain(int *iop, int *irqp)
// to -1, is to use 0 as a hard coded, do not probe. // to -1, is to use 0 as a hard coded, do not probe.
// //
// /\/\|=mhw=|\/\/ // /\/\|=mhw=|\/\/
poll_only |= irqp[i]; poll_only |= irq[i];
}
}
} }
poll_only = !poll_only; poll_only = !poll_only;
...@@ -783,6 +842,7 @@ ip2_loadmain(int *iop, int *irqp) ...@@ -783,6 +842,7 @@ ip2_loadmain(int *iop, int *irqp)
out: out:
return err; return err;
} }
module_init(ip2_loadmain);
/******************************************************************************/ /******************************************************************************/
/* Function: ip2_init_board() */ /* Function: ip2_init_board() */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment