Commit 47ff3de9 authored by Kishon Vijay Abraham I's avatar Kishon Vijay Abraham I Committed by Bjorn Helgaas

PCI: dra7xx: Add TI DRA7xx PCIe driver

Add support for PCIe controller in DRA7xx.  This driver re-uses the
designware core code that is already present in kernel.
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
Acked-by: default avatarJingoo Han <jg1.han@samsung.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Mohit Kumar <mohit.kumar@st.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
parent f4c55c5a
TI PCI Controllers
PCIe Designware Controller
- compatible: Should be "ti,dra7-pcie""
- reg : Two register ranges as listed in the reg-names property
- reg-names : The first entry must be "ti-conf" for the TI specific registers
The second entry must be "rc-dbics" for the designware pcie
registers
The third entry must be "config" for the PCIe configuration space
- phys : list of PHY specifiers (used by generic PHY framework)
- phy-names : must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
number of PHYs as specified in *phys* property.
- ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>",
where <X> is the instance number of the pcie from the HW spec.
- interrupts : Two interrupt entries must be specified. The first one is for
main interrupt line and the second for MSI interrupt line.
- #address-cells,
#size-cells,
#interrupt-cells,
device_type,
ranges,
num-lanes,
interrupt-map-mask,
interrupt-map : as specified in ../designware-pcie.txt
Example:
axi {
compatible = "simple-bus";
#size-cells = <1>;
#address-cells = <1>;
ranges = <0x51000000 0x51000000 0x3000
0x0 0x20000000 0x10000000>;
pcie@51000000 {
compatible = "ti,dra7-pcie";
reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
reg-names = "rc_dbics", "ti_conf", "config";
interrupts = <0 232 0x4>, <0 233 0x4>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x20013000 0x13000 0 0xffed000>;
#interrupt-cells = <1>;
num-lanes = <1>;
ti,hwmods = "pcie1";
phys = <&pcie1_phy>;
phy-names = "pcie-phy0";
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc 1>,
<0 0 0 2 &pcie_intc 2>,
<0 0 0 3 &pcie_intc 3>,
<0 0 0 4 &pcie_intc 4>;
pcie_intc: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
};
};
};
...@@ -6796,6 +6796,14 @@ S: Supported ...@@ -6796,6 +6796,14 @@ S: Supported
F: Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt F: Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
F: drivers/pci/host/pci-tegra.c F: drivers/pci/host/pci-tegra.c
PCI DRIVER FOR TI DRA7XX
M: Kishon Vijay Abraham I <kishon@ti.com>
L: linux-omap@vger.kernel.org
L: linux-pci@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/pci/ti-pci.txt
F: drivers/pci/host/pci-dra7xx.c
PCI DRIVER FOR RENESAS R-CAR PCI DRIVER FOR RENESAS R-CAR
M: Simon Horman <horms@verge.net.au> M: Simon Horman <horms@verge.net.au>
L: linux-pci@vger.kernel.org L: linux-pci@vger.kernel.org
......
menu "PCI host controller drivers" menu "PCI host controller drivers"
depends on PCI depends on PCI
config PCI_DRA7XX
bool "TI DRA7xx PCIe controller"
select PCIE_DW
depends on OF && HAS_IOMEM && TI_PIPE3
help
Enables support for the PCIe controller in the DRA7xx SoC. There
are two instances of PCIe controller in DRA7xx. This controller can
act both as EP and RC. This reuses the Designware core.
config PCI_MVEBU config PCI_MVEBU
bool "Marvell EBU PCIe controller" bool "Marvell EBU PCIe controller"
depends on ARCH_MVEBU || ARCH_DOVE || ARCH_KIRKWOOD depends on ARCH_MVEBU || ARCH_DOVE || ARCH_KIRKWOOD
......
obj-$(CONFIG_PCIE_DW) += pcie-designware.o obj-$(CONFIG_PCIE_DW) += pcie-designware.o
obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
obj-$(CONFIG_PCI_IMX6) += pci-imx6.o obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment