Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

Pull HID updates from Jiri Kosina:

 - Documentation conversion to ReST, from Mauro Carvalho Chehab

 - Wacom MobileStudio Pro support, from Ping Cheng

 - Wacom 2nd Gen Intuos Pro Small support, from Aaron Armstrong Skomra

 - assorted small fixes and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: Add another Primax PIXART OEM mouse quirk
  HID: wacom: generic: add touchring adjustment for 2nd Gen Pro Small
  docs: hid: convert to ReST
  HID: remove NO_D3 flag when remove driver
  HID: wacom: add new MobileStudio Pro support
  HID: wacom: generic: read the number of expected touches on a per collection basis
  HID: wacom: generic: support the 'report valid' usage for touch
  HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report
  HID: wacom: Add 2nd gen Intuos Pro Small support
  HID: uclogic: Add support for Ugee Rainbow CV720
  HID: logitech-dj: fix return value of logi_dj_recv_query_hidpp_devices
  HID: logitech-hidpp: HID: make const array consumer_rdesc_start static
  HID: logitech-dj: make const array template static
  HID: wacom: correct touch resolution x/y typo
  HID: wacom: generic: Correct pad syncing
  HID: wacom: generic: only switch the mode on devices with LEDs
  HID: logitech-dj: Add usb-id for the 27MHz MX3000 receiver

Documentation/hid/hid-alps.txt → Documentation/hid/hid-alps.rst

+==========================
 ALPS HID Touchpad Protocol
-----------------------
+==========================
 
 Introduction
 ------------
 Currently ALPS HID driver supports U1 Touchpad device.
 
-U1 devuce basic information.
+U1 device basic information.
+
+==========	======
 Vender ID	0x044E
 Product ID	0x120B
 Version ID	0x0121
+==========	======
 
 
 HID Descriptor
-------------
+--------------
+
+=======	====================	=====	=======================================
 Byte	Field			Value	Notes
+=======	====================	=====	=======================================
 0	wHIDDescLength		001E	Length of HID Descriptor : 30 bytes
 2	bcdVersion		0100	Compliant with Version 1.00
 4	wReportDescLength	00B2	Report Descriptor is 178 Bytes (0x00B2)
@@ -28,10 +35,13 @@ Byte	Field			Value	Notes
 22	wProductID		120B	Product ID 0x120B
 24	wVersionID		0121	Version 01.21
 26	RESERVED		0000	RESERVED
+=======	====================	=====	=======================================
 
 
 Report ID
-------------
+---------
+
+==========	=================  =========================================
 ReportID-1	(Input Reports)	   (HIDUsage-Mouse) for TP&SP
 ReportID-2	(Input Reports)	   (HIDUsage-keyboard) for TP
 ReportID-3	(Input Reports)	   (Vendor Usage: Max 10 finger data) for TP
@@ -39,21 +49,28 @@ ReportID-4	(Input Reports)	(Vendor Usage: ON bit data) for GP
 ReportID-5	(Feature Reports)  Feature Reports
 ReportID-6	(Input Reports)	   (Vendor Usage: StickPointer data) for SP
 ReportID-7	(Feature Reports)  Flash update (Bootloader)
+==========	=================  =========================================
 
 
 Data pattern
 ------------
+
+=====	==========	=====	=================
 Case1	ReportID_1	TP/SP	Relative/Relative
 Case2	ReportID_3	TP	Absolute
 	ReportID_6	SP	Absolute
+=====	==========	=====	=================
 
 
 Command Read/Write
 ------------------
 To read/write to RAM, need to send a commands to the device.
+
 The command format is as below.
 
 DataByte(SET_REPORT)
+
+=====	======================
 Byte1	Command Byte
 Byte2	Address - Byte 0 (LSB)
 Byte3	Address - Byte 1
@@ -61,13 +78,19 @@ Byte4	Address - Byte 2
 Byte5	Address - Byte 3 (MSB)
 Byte6	Value Byte
 Byte7	Checksum
+=====	======================
 
 Command Byte is read=0xD1/write=0xD2 .
+
 Address is read/write RAM address.
+
 Value Byte is writing data when you send the write commands.
+
 When you read RAM, there is no meaning.
 
 DataByte(GET_REPORT)
+
+=====	======================
 Byte1	Response Byte
 Byte2	Address - Byte 0 (LSB)
 Byte3	Address - Byte 1
@@ -75,6 +98,7 @@ Byte4	Address - Byte 2
 Byte5	Address - Byte 3 (MSB)
 Byte6	Value Byte
 Byte7	Checksum
+=====	======================
 
 Read value is stored in Value Byte.
 
@@ -82,7 +106,11 @@ Read value is stored in Value Byte.
 Packet Format
 Touchpad data byte
 ------------------
-	b7	b6	b5	b4	b3	b2	b1	b0
+
+
+======= ======= ======= ======= ======= ======= ======= ======= =====
+-	b7	b6	b5	b4	b3	b2	b1	b0
+======= ======= ======= ======= ======= ======= ======= ======= =====
 1	0	0	SW6	SW5	SW4	SW3	SW2	SW1
 2	0	0	0	Fcv	Fn3	Fn2	Fn1	Fn0
 3	Xa0_7	Xa0_6	Xa0_5	Xa0_4	Xa0_3	Xa0_2	Xa0_1	Xa0_0
@@ -114,17 +142,25 @@ Touchpad data byte
 25	Ya4_7	Ya4_6	Ya4_5	Ya4_4	Ya4_3	Ya4_2	Ya4_1	Ya4_0
 26	Ya4_15	Ya4_14	Ya4_13	Ya4_12	Ya4_11	Ya4_10	Ya4_9	Ya4_8
 27	LFB4	Zs4_6	Zs4_5	Zs4_4	Zs4_3	Zs4_2	Zs4_1	Zs4_0
+======= ======= ======= ======= ======= ======= ======= ======= =====
 
 
-SW1-SW6:	SW ON/OFF status
-Xan_15-0(16bit):X Absolute data of the "n"th finger
-Yan_15-0(16bit):Y Absolute data of the "n"th finger
-Zsn_6-0(7bit):	Operation area of the "n"th finger
+SW1-SW6:
+	SW ON/OFF status
+Xan_15-0(16bit):
+	X Absolute data of the "n"th finger
+Yan_15-0(16bit):
+	Y Absolute data of the "n"th finger
+Zsn_6-0(7bit):
+	Operation area of the "n"th finger
 
 
 StickPointer data byte
-------------------
-	b7	b6	b5	b4	b3	b2	b1	b0
+----------------------
+
+======= ======= ======= ======= ======= ======= ======= ======= =====
+-	b7	b6	b5	b4	b3	b2	b1	b0
+======= ======= ======= ======= ======= ======= ======= ======= =====
 Byte1	1	1	1	0	1	SW3	SW2	SW1
 Byte2	X7	X6	X5	X4	X3	X2	X1	X0
 Byte3	X15	X14	X13	X12	X11	X10	X9	X8
@@ -132,8 +168,13 @@ Byte4	Y7	Y6	Y5	Y4	Y3	Y2	Y1	Y0
 Byte5	Y15	Y14	Y13	Y12	Y11	Y10	Y9	Y8
 Byte6	Z7	Z6	Z5	Z4	Z3	Z2	Z1	Z0
 Byte7	T&P	Z14	Z13	Z12	Z11	Z10	Z9	Z8
-
-SW1-SW3:	SW ON/OFF status
-Xn_15-0(16bit):X Absolute data
-Yn_15-0(16bit):Y Absolute data
-Zn_14-0(15bit):Z
+======= ======= ======= ======= ======= ======= ======= ======= =====
+
+SW1-SW3:
+	SW ON/OFF status
+Xn_15-0(16bit):
+	X Absolute data
+Yn_15-0(16bit):
+	Y Absolute data
+Zn_14-0(15bit):
+	Z

Documentation/hid/hid-transport.txt → Documentation/hid/hid-transport.rst

-                          HID I/O Transport Drivers
-                         ===========================
+=========================
+HID I/O Transport Drivers
+=========================
 
 The HID subsystem is independent of the underlying transport driver. Initially,
 only USB was supported, but other specifications adopted the HID design and
@@ -16,6 +17,8 @@ transport and device setup/management. HID core is responsible of
 report-parsing, report interpretation and the user-space API. Device specifics
 and quirks are handled by all layers depending on the quirk.
 
+::
+
  +-----------+  +-----------+            +-----------+  +-----------+
  | Device #1 |  | Device #i |            | Device #j |  | Device #k |
  +-----------+  +-----------+            +-----------+  +-----------+
@@ -42,8 +45,9 @@ and quirks are handled by all layers depending on the quirk.
  +----------------+  +-----------+  +------------------+  +------------------+
 
 Example Drivers:
-  I/O: USB, I2C, Bluetooth-l2cap
-  Transport: USB-HID, I2C-HID, BT-HIDP
+
+  - I/O: USB, I2C, Bluetooth-l2cap
+  - Transport: USB-HID, I2C-HID, BT-HIDP
 
 Everything below "HID Core" is simplified in this graph as it is only of
 interest to HID device drivers. Transport drivers do not need to know the
@@ -183,7 +187,7 @@ Other ctrl-channel requests are supported by USB-HID but are not available
 -------------------
 
 Transport drivers normally use the following procedure to register a new device
-with HID core:
+with HID core::
 
 	struct hid_device *hid;
 	int ret;
@@ -215,7 +219,7 @@ Once hid_add_device() is entered, HID core might use the callbacks provided in
 "custom_ll_driver". Note that fields like "country" can be ignored by underlying
 transport-drivers if not supported.
 
-To unregister a device, use:
+To unregister a device, use::
 
 	hid_destroy_device(hid);
 
@@ -226,73 +230,110 @@ driver callbacks.
 -----------------------------
 
 The available HID callbacks are:
- - int (*start) (struct hid_device *hdev)
+
+   ::
+
+      int (*start) (struct hid_device *hdev)
+
    Called from HID device drivers once they want to use the device. Transport
    drivers can choose to setup their device in this callback. However, normally
    devices are already set up before transport drivers register them to HID core
    so this is mostly only used by USB-HID.
 
- - void (*stop) (struct hid_device *hdev)
+   ::
+
+      void (*stop) (struct hid_device *hdev)
+
    Called from HID device drivers once they are done with a device. Transport
    drivers can free any buffers and deinitialize the device. But note that
    ->start() might be called again if another HID device driver is loaded on the
    device.
+
    Transport drivers are free to ignore it and deinitialize devices after they
    destroyed them via hid_destroy_device().
 
- - int (*open) (struct hid_device *hdev)
+   ::
+
+      int (*open) (struct hid_device *hdev)
+
    Called from HID device drivers once they are interested in data reports.
    Usually, while user-space didn't open any input API/etc., device drivers are
    not interested in device data and transport drivers can put devices asleep.
    However, once ->open() is called, transport drivers must be ready for I/O.
    ->open() calls are nested for each client that opens the HID device.
 
- - void (*close) (struct hid_device *hdev)
+   ::
+
+      void (*close) (struct hid_device *hdev)
+
    Called from HID device drivers after ->open() was called but they are no
    longer interested in device reports. (Usually if user-space closed any input
    devices of the driver).
+
    Transport drivers can put devices asleep and terminate any I/O of all
    ->open() calls have been followed by a ->close() call. However, ->start() may
    be called again if the device driver is interested in input reports again.
 
- - int (*parse) (struct hid_device *hdev)
+   ::
+
+      int (*parse) (struct hid_device *hdev)
+
    Called once during device setup after ->start() has been called. Transport
    drivers must read the HID report-descriptor from the device and tell HID core
    about it via hid_parse_report().
 
- - int (*power) (struct hid_device *hdev, int level)
+   ::
+
+      int (*power) (struct hid_device *hdev, int level)
+
    Called by HID core to give PM hints to transport drivers. Usually this is
    analogical to the ->open() and ->close() hints and redundant.
 
- - void (*request) (struct hid_device *hdev, struct hid_report *report,
+   ::
+
+      void (*request) (struct hid_device *hdev, struct hid_report *report,
 		       int reqtype)
+
    Send an HID request on the ctrl channel. "report" contains the report that
    should be sent and "reqtype" the request type. Request-type can be
    HID_REQ_SET_REPORT or HID_REQ_GET_REPORT.
+
    This callback is optional. If not provided, HID core will assemble a raw
    report following the HID specs and send it via the ->raw_request() callback.
    The transport driver is free to implement this asynchronously.
 
- - int (*wait) (struct hid_device *hdev)
+   ::
+
+      int (*wait) (struct hid_device *hdev)
+
    Used by HID core before calling ->request() again. A transport driver can use
    it to wait for any pending requests to complete if only one request is
    allowed at a time.
 
- - int (*raw_request) (struct hid_device *hdev, unsigned char reportnum,
+   ::
+
+      int (*raw_request) (struct hid_device *hdev, unsigned char reportnum,
                           __u8 *buf, size_t count, unsigned char rtype,
                           int reqtype)
+
    Same as ->request() but provides the report as raw buffer. This request shall
    be synchronous. A transport driver must not use ->wait() to complete such
    requests. This request is mandatory and hid core will reject the device if
    it is missing.
 
- - int (*output_report) (struct hid_device *hdev, __u8 *buf, size_t len)
+   ::
+
+      int (*output_report) (struct hid_device *hdev, __u8 *buf, size_t len)
+
    Send raw output report via intr channel. Used by some HID device drivers
    which require high throughput for outgoing requests on the intr channel. This
    must not cause SET_REPORT calls! This must be implemented as asynchronous
    output report on the intr channel!
 
- - int (*idle) (struct hid_device *hdev, int report, int idle, int reqtype)
+   ::
+
+      int (*idle) (struct hid_device *hdev, int report, int idle, int reqtype)
+
    Perform SET/GET_IDLE request. Only used by USB-HID, do not implement!
 
 2.3) Data Path
@@ -314,4 +355,5 @@ transport driver and not passed to hid_input_report().
 Acknowledgements to SET_REPORT requests are not of interest to HID core.
 
 ----------------------------------------------------
+
 Written 2013, David Herrmann <dh.herrmann@gmail.com>

Documentation/hid/hiddev.txt → Documentation/hid/hiddev.rst

+================================================
 Care and feeding of your Human Interface Devices
+================================================
 
-INTRODUCTION
+Introduction
+============
 
 In addition to the normal input type HID devices, USB also uses the
 human interface device protocols for things that are not really human
@@ -16,7 +19,7 @@ normalised event interface - see Documentation/input/input.rst
 * the hiddev interface, which provides fairly raw HID events
 
 The data flow for a HID event produced by a device is something like
-the following :
+the following::
 
  usb.c ---> hid-core.c  ----> hid-input.c ----> [keyboard/mouse/joystick/event]
                          |
@@ -27,27 +30,29 @@ In addition, other subsystems (apart from USB) can potentially feed
 events into the input subsystem, but these have no effect on the hid
 device interface.
 
-USING THE HID DEVICE INTERFACE
+Using the HID Device Interface
+==============================
 
 The hiddev interface is a char interface using the normal USB major,
 with the minor numbers starting at 96 and finishing at 111. Therefore,
-you need the following commands:
-mknod /dev/usb/hiddev0 c 180 96
-mknod /dev/usb/hiddev1 c 180 97
-mknod /dev/usb/hiddev2 c 180 98
-mknod /dev/usb/hiddev3 c 180 99
-mknod /dev/usb/hiddev4 c 180 100
-mknod /dev/usb/hiddev5 c 180 101
-mknod /dev/usb/hiddev6 c 180 102
-mknod /dev/usb/hiddev7 c 180 103
-mknod /dev/usb/hiddev8 c 180 104
-mknod /dev/usb/hiddev9 c 180 105
-mknod /dev/usb/hiddev10 c 180 106
-mknod /dev/usb/hiddev11 c 180 107
-mknod /dev/usb/hiddev12 c 180 108
-mknod /dev/usb/hiddev13 c 180 109
-mknod /dev/usb/hiddev14 c 180 110
-mknod /dev/usb/hiddev15 c 180 111
+you need the following commands::
+
+	mknod /dev/usb/hiddev0 c 180 96
+	mknod /dev/usb/hiddev1 c 180 97
+	mknod /dev/usb/hiddev2 c 180 98
+	mknod /dev/usb/hiddev3 c 180 99
+	mknod /dev/usb/hiddev4 c 180 100
+	mknod /dev/usb/hiddev5 c 180 101
+	mknod /dev/usb/hiddev6 c 180 102
+	mknod /dev/usb/hiddev7 c 180 103
+	mknod /dev/usb/hiddev8 c 180 104
+	mknod /dev/usb/hiddev9 c 180 105
+	mknod /dev/usb/hiddev10 c 180 106
+	mknod /dev/usb/hiddev11 c 180 107
+	mknod /dev/usb/hiddev12 c 180 108
+	mknod /dev/usb/hiddev13 c 180 109
+	mknod /dev/usb/hiddev14 c 180 110
+	mknod /dev/usb/hiddev15 c 180 111
 
 So you point your hiddev compliant user-space program at the correct
 interface for your device, and it all just works.
@@ -56,7 +61,9 @@ Assuming that you have a hiddev compliant user-space program, of
 course. If you need to write one, read on.
 
 
-THE HIDDEV API
+The HIDDEV API
+==============
+
 This description should be read in conjunction with the HID
 specification, freely available from http://www.usb.org, and
 conveniently linked of http://www.linux-usb.org.
@@ -69,12 +76,14 @@ each of which can have one or more "usages".  In the hid-core,
 each one of these usages has a single signed 32 bit value.
 
 read():
+-------
+
 This is the event interface.  When the HID device's state changes,
 it performs an interrupt transfer containing a report which contains
 the changed value.  The hid-core.c module parses the report, and
 returns to hiddev.c the individual usages that have changed within
 the report.  In its basic mode, the hiddev will make these individual
-usage changes available to the reader using a struct hiddev_event:
+usage changes available to the reader using a struct hiddev_event::
 
        struct hiddev_event {
            unsigned hid;
@@ -91,12 +100,18 @@ ioctl() described below.
 
 
 ioctl():
+--------
+
 This is the control interface. There are a number of controls:
 
-HIDIOCGVERSION - int (read)
-Gets the version code out of the hiddev driver.
+HIDIOCGVERSION
+  - int (read)
+
+ Gets the version code out of the hiddev driver.
+
+HIDIOCAPPLICATION
+  - (none)
 
-HIDIOCAPPLICATION - (none)
 This ioctl call returns the HID application usage associated with the
 hid device. The third argument to ioctl() specifies which application
 index to get. This is useful when the device has more than one
@@ -106,7 +121,9 @@ returns -1. You can find out beforehand how many application
 collections the device has from the num_applications field from the
 hiddev_devinfo structure.
 
-HIDIOCGCOLLECTIONINFO - struct hiddev_collection_info (read/write)
+HIDIOCGCOLLECTIONINFO
+  - struct hiddev_collection_info (read/write)
+
 This returns a superset of the information above, providing not only
 application collections, but all the collections the device has.  It
 also returns the level the collection lives in the hierarchy.
@@ -115,14 +132,20 @@ field set to the index that should be returned.  The ioctl fills in
 the other fields.  If the index is larger than the last collection
 index, the ioctl returns -1 and sets errno to -EINVAL.
 
-HIDIOCGDEVINFO - struct hiddev_devinfo (read)
+HIDIOCGDEVINFO
+  - struct hiddev_devinfo (read)
+
 Gets a hiddev_devinfo structure which describes the device.
 
-HIDIOCGSTRING - struct hiddev_string_descriptor (read/write)
+HIDIOCGSTRING
+  - struct hiddev_string_descriptor (read/write)
+
 Gets a string descriptor from the device. The caller must fill in the
 "index" field to indicate which descriptor should be returned.
 
-HIDIOCINITREPORT - (none)
+HIDIOCINITREPORT
+  - (none)
+
 Instructs the kernel to retrieve all input and feature report values
 from the device. At this point, all the usage structures will contain
 current values for the device, and will maintain it as the device
@@ -130,21 +153,29 @@ changes.  Note that the use of this ioctl is unnecessary in general,
 since later kernels automatically initialize the reports from the
 device at attach time.
 
-HIDIOCGNAME - string (variable length)
+HIDIOCGNAME
+  - string (variable length)
+
 Gets the device name
 
-HIDIOCGREPORT - struct hiddev_report_info (write)
+HIDIOCGREPORT
+  - struct hiddev_report_info (write)
+
 Instructs the kernel to get a feature or input report from the device,
 in order to selectively update the usage structures (in contrast to
 INITREPORT).
 
-HIDIOCSREPORT - struct hiddev_report_info (write)
+HIDIOCSREPORT
+  - struct hiddev_report_info (write)
+
 Instructs the kernel to send a report to the device. This report can
 be filled in by the user through HIDIOCSUSAGE calls (below) to fill in
 individual usage values in the report before sending the report in full
 to the device.
 
-HIDIOCGREPORTINFO - struct hiddev_report_info (read/write)
+HIDIOCGREPORTINFO
+  - struct hiddev_report_info (read/write)
+
 Fills in a hiddev_report_info structure for the user. The report is
 looked up by type (input, output or feature) and id, so these fields
 must be filled in by the user. The ID can be absolute -- the actual
@@ -156,19 +187,25 @@ use the relative IDs above to enumerate the valid IDs. The ioctl
 returns non-zero when there is no more next ID. The real report ID is
 filled into the returned hiddev_report_info structure.
 
-HIDIOCGFIELDINFO - struct hiddev_field_info (read/write)
+HIDIOCGFIELDINFO
+  - struct hiddev_field_info (read/write)
+
 Returns the field information associated with a report in a
 hiddev_field_info structure. The user must fill in report_id and
 report_type in this structure, as above. The field_index should also
 be filled in, which should be a number from 0 and maxfield-1, as
 returned from a previous HIDIOCGREPORTINFO call.
 
-HIDIOCGUCODE - struct hiddev_usage_ref (read/write)
+HIDIOCGUCODE
+  - struct hiddev_usage_ref (read/write)
+
 Returns the usage_code in a hiddev_usage_ref structure, given that
 given its report type, report id, field index, and index within the
 field have already been filled into the structure.
 
-HIDIOCGUSAGE - struct hiddev_usage_ref (read/write)
+HIDIOCGUSAGE
+  - struct hiddev_usage_ref (read/write)
+
 Returns the value of a usage in a hiddev_usage_ref structure. The
 usage to be retrieved can be specified as above, or the user can
 choose to fill in the report_type field and specify the report_id as
@@ -176,28 +213,37 @@ HID_REPORT_ID_UNKNOWN. In this case, the hiddev_usage_ref will be
 filled in with the report and field information associated with this
 usage if it is found.
 
-HIDIOCSUSAGE - struct hiddev_usage_ref (write)
+HIDIOCSUSAGE
+  - struct hiddev_usage_ref (write)
+
 Sets the value of a usage in an output report.  The user fills in
 the hiddev_usage_ref structure as above, but additionally fills in
 the value field.
 
-HIDIOGCOLLECTIONINDEX - struct hiddev_usage_ref (write)
+HIDIOGCOLLECTIONINDEX
+  - struct hiddev_usage_ref (write)
+
 Returns the collection index associated with this usage.  This
 indicates where in the collection hierarchy this usage sits.
 
-HIDIOCGFLAG - int (read)
-HIDIOCSFLAG - int (write)
+HIDIOCGFLAG
+  - int (read)
+HIDIOCSFLAG
+  - int (write)
+
 These operations respectively inspect and replace the mode flags
 that influence the read() call above.  The flags are as follows:
 
-    HIDDEV_FLAG_UREF - read() calls will now return 
+    HIDDEV_FLAG_UREF
+      - read() calls will now return
         struct hiddev_usage_ref instead of struct hiddev_event.
         This is a larger structure, but in situations where the
         device has more than one usage in its reports with the
         same usage code, this mode serves to resolve such
         ambiguity.
 
-    HIDDEV_FLAG_REPORT - This flag can only be used in conjunction
+    HIDDEV_FLAG_REPORT
+      - This flag can only be used in conjunction
         with HIDDEV_FLAG_UREF.  With this flag set, when the device
         sends a report, a struct hiddev_usage_ref will be returned
         to read() filled in with the report_type and report_id, but

Documentation/hid/hidraw.txt → Documentation/hid/hidraw.rst

-      HIDRAW - Raw Access to USB and Bluetooth Human Interface Devices
-     ==================================================================
+================================================================
+HIDRAW - Raw Access to USB and Bluetooth Human Interface Devices
+================================================================
 
 The hidraw driver provides a raw interface to USB and Bluetooth Human
 Interface Devices (HIDs).  It differs from hiddev in that reports sent and
@@ -31,6 +32,7 @@ directly under /dev (eg: /dev/hidraw0).  As this location is distribution-
 and udev rule-dependent, applications should use libudev to locate hidraw
 devices attached to the system.  There is a tutorial on libudev with a
 working example at:
+
 	http://www.signal11.us/oss/udev/
 
 The HIDRAW API
@@ -51,7 +53,7 @@ byte.  For devices which do not use numbered reports, the report data
 will begin at the first byte.
 
 write()
---------
+-------
 The write() function will write a report to the device. For USB devices, if
 the device has an INTERRUPT OUT endpoint, the report will be sent on that
 endpoint. If it does not, the report will be sent over the control endpoint,
@@ -62,38 +64,52 @@ number.  If the device does not use numbered reports, the first byte should
 be set to 0. The report data itself should begin at the second byte.
 
 ioctl()
---------
+-------
 Hidraw supports the following ioctls:
 
-HIDIOCGRDESCSIZE: Get Report Descriptor Size
+HIDIOCGRDESCSIZE:
+	Get Report Descriptor Size
+
 This ioctl will get the size of the device's report descriptor.
 
-HIDIOCGRDESC: Get Report Descriptor
+HIDIOCGRDESC:
+	Get Report Descriptor
+
 This ioctl returns the device's report descriptor using a
 hidraw_report_descriptor struct.  Make sure to set the size field of the
 hidraw_report_descriptor struct to the size returned from HIDIOCGRDESCSIZE.
 
-HIDIOCGRAWINFO: Get Raw Info
+HIDIOCGRAWINFO:
+	Get Raw Info
+
 This ioctl will return a hidraw_devinfo struct containing the bus type, the
 vendor ID (VID), and product ID (PID) of the device. The bus type can be one
-of:
-	BUS_USB
-	BUS_HIL
-	BUS_BLUETOOTH
-	BUS_VIRTUAL
+of::
+
+	- BUS_USB
+	- BUS_HIL
+	- BUS_BLUETOOTH
+	- BUS_VIRTUAL
+
 which are defined in uapi/linux/input.h.
 
-HIDIOCGRAWNAME(len): Get Raw Name
+HIDIOCGRAWNAME(len):
+	Get Raw Name
+
 This ioctl returns a string containing the vendor and product strings of
 the device.  The returned string is Unicode, UTF-8 encoded.
 
-HIDIOCGRAWPHYS(len): Get Physical Address
+HIDIOCGRAWPHYS(len):
+	Get Physical Address
+
 This ioctl returns a string representing the physical address of the device.
 For USB devices, the string contains the physical path to the device (the
 USB controller, hubs, ports, etc).  For Bluetooth devices, the string
 contains the hardware (MAC) address of the device.
 
-HIDIOCSFEATURE(len): Send a Feature Report
+HIDIOCSFEATURE(len):
+	Send a Feature Report
+
 This ioctl will send a feature report to the device.  Per the HID
 specification, feature reports are always sent using the control endpoint.
 Set the first byte of the supplied buffer to the report number.  For devices
@@ -101,7 +117,9 @@ which do not use numbered reports, set the first byte to 0. The report data
 begins in the second byte. Make sure to set len accordingly, to one more
 than the length of the report (to account for the report number).
 
-HIDIOCGFEATURE(len): Get a Feature Report
+HIDIOCGFEATURE(len):
+	Get a Feature Report
+
 This ioctl will request a feature report from the device using the control
 endpoint.  The first byte of the supplied buffer should be set to the report
 number of the requested report.  For devices which do not use numbered
@@ -109,11 +127,12 @@ reports, set the first byte to 0.  The report will be returned starting at
 the first byte of the buffer (ie: the report number is not returned).
 
 Example
----------
+-------
 In samples/, find hid-example.c, which shows examples of read(), write(),
 and all the ioctls for hidraw.  The code may be used by anyone for any
 purpose, and can serve as a starting point for developing applications using
 hidraw.
 
 Document by:
+
 	Alan Ott <alan@signal11.us>, Signal 11 Software

Documentation/hid/index.rst

+:orphan:
+
+=============================
+Human Interface Devices (HID)
+=============================
+
+.. toctree::
+   :maxdepth: 1
+
+   hiddev
+   hidraw
+   hid-sensor
+   hid-transport
+
+   uhid
+
+   hid-alps
+   intel-ish-hid

Documentation/hid/uhid.txt → Documentation/hid/uhid.rst

-      UHID - User-space I/O driver support for HID subsystem
-     ========================================================
+======================================================
+UHID - User-space I/O driver support for HID subsystem
+======================================================
 
 UHID allows user-space to implement HID transport drivers. Please see
 hid-transport.txt for an introduction into HID transport drivers. This document
@@ -22,9 +23,9 @@ If a new device is detected by your HID I/O Driver and you want to register this
 device with the HID subsystem, then you need to open /dev/uhid once for each
 device you want to register. All further communication is done by read()'ing or
 write()'ing "struct uhid_event" objects. Non-blocking operations are supported
-by setting O_NONBLOCK.
+by setting O_NONBLOCK::
 
-struct uhid_event {
+  struct uhid_event {
         __u32 type;
         union {
                 struct uhid_create2_req create2;
@@ -32,7 +33,7 @@ struct uhid_event {
                 struct uhid_input2_req input2;
                 ...
         } u;
-};
+  };
 
 The "type" field contains the ID of the event. Depending on the ID different
 payloads are sent. You must not split a single event across multiple read()'s or
@@ -86,31 +87,31 @@ the request was handled successfully. O_NONBLOCK does not affect write() as
 writes are always handled immediately in a non-blocking fashion. Future requests
 might make use of O_NONBLOCK, though.
 
-  UHID_CREATE2:
+UHID_CREATE2:
   This creates the internal HID device. No I/O is possible until you send this
   event to the kernel. The payload is of type struct uhid_create2_req and
   contains information about your device. You can start I/O now.
 
-  UHID_DESTROY:
+UHID_DESTROY:
   This destroys the internal HID device. No further I/O will be accepted. There
   may still be pending messages that you can receive with read() but no further
   UHID_INPUT events can be sent to the kernel.
   You can create a new device by sending UHID_CREATE2 again. There is no need to
   reopen the character device.
 
-  UHID_INPUT2:
+UHID_INPUT2:
   You must send UHID_CREATE2 before sending input to the kernel! This event
   contains a data-payload. This is the raw data that you read from your device
   on the interrupt channel. The kernel will parse the HID reports.
 
-  UHID_GET_REPORT_REPLY:
+UHID_GET_REPORT_REPLY:
   If you receive a UHID_GET_REPORT request you must answer with this request.
   You  must copy the "id" field from the request into the answer. Set the "err"
   field to 0 if no error occurred or to EIO if an I/O error occurred.
   If "err" is 0 then you should fill the buffer of the answer with the results
   of the GET_REPORT request and set "size" correspondingly.
 
-  UHID_SET_REPORT_REPLY:
+UHID_SET_REPORT_REPLY:
   This is the SET_REPORT equivalent of UHID_GET_REPORT_REPLY. Unlike GET_REPORT,
   SET_REPORT never returns a data buffer, therefore, it's sufficient to set the
   "id" and "err" fields correctly.
@@ -120,16 +121,18 @@ read()
 read() will return a queued output report. No reaction is required to any of
 them but you should handle them according to your needs.
 
-  UHID_START:
+UHID_START:
   This is sent when the HID device is started. Consider this as an answer to
   UHID_CREATE2. This is always the first event that is sent. Note that this
   event might not be available immediately after write(UHID_CREATE2) returns.
   Device drivers might required delayed setups.
   This event contains a payload of type uhid_start_req. The "dev_flags" field
   describes special behaviors of a device. The following flags are defined:
-      UHID_DEV_NUMBERED_FEATURE_REPORTS:
-      UHID_DEV_NUMBERED_OUTPUT_REPORTS:
-      UHID_DEV_NUMBERED_INPUT_REPORTS:
+
+      - UHID_DEV_NUMBERED_FEATURE_REPORTS
+      - UHID_DEV_NUMBERED_OUTPUT_REPORTS
+      - UHID_DEV_NUMBERED_INPUT_REPORTS
+
           Each of these flags defines whether a given report-type uses numbered
           reports. If numbered reports are used for a type, all messages from
           the kernel already have the report-number as prefix. Otherwise, no
@@ -137,33 +140,35 @@ them but you should handle them according to your needs.
           For messages sent by user-space to the kernel, you must adjust the
           prefixes according to these flags.
 
-  UHID_STOP:
+UHID_STOP:
   This is sent when the HID device is stopped. Consider this as an answer to
   UHID_DESTROY.
+
   If you didn't destroy your device via UHID_DESTROY, but the kernel sends an
   UHID_STOP event, this should usually be ignored. It means that the kernel
   reloaded/changed the device driver loaded on your HID device (or some other
   maintenance actions happened).
+
   You can usually ignored any UHID_STOP events safely.
 
-  UHID_OPEN:
+UHID_OPEN:
   This is sent when the HID device is opened. That is, the data that the HID
   device provides is read by some other process. You may ignore this event but
   it is useful for power-management. As long as you haven't received this event
   there is actually no other process that reads your data so there is no need to
   send UHID_INPUT2 events to the kernel.
 
-  UHID_CLOSE:
+UHID_CLOSE:
   This is sent when there are no more processes which read the HID data. It is
   the counterpart of UHID_OPEN and you may as well ignore this event.
 
-  UHID_OUTPUT:
+UHID_OUTPUT:
   This is sent if the HID device driver wants to send raw data to the I/O
   device on the interrupt channel. You should read the payload and forward it to
   the device. The payload is of type "struct uhid_output_req".
   This may be received even though you haven't received UHID_OPEN, yet.
 
-  UHID_GET_REPORT:
+UHID_GET_REPORT:
   This event is sent if the kernel driver wants to perform a GET_REPORT request
   on the control channeld as described in the HID specs. The report-type and
   report-number are available in the payload.
@@ -177,11 +182,12 @@ them but you should handle them according to your needs.
   timed out, the kernel will ignore the response silently. The "id" field is
   never re-used, so conflicts cannot happen.
 
-  UHID_SET_REPORT:
+UHID_SET_REPORT:
   This is the SET_REPORT equivalent of UHID_GET_REPORT. On receipt, you shall
   send a SET_REPORT request to your hid device. Once it replies, you must tell
   the kernel about it via UHID_SET_REPORT_REPLY.
   The same restrictions as for UHID_GET_REPORT apply.
 
 ----------------------------------------------------
+
 Written 2012, David Herrmann <dh.herrmann@gmail.com>

Documentation/input/input.rst

@@ -188,7 +188,7 @@ LCDs and many other purposes.
 
 The monitor and speaker controls should be easy to add to the hid/input
 interface, but for the UPSs and LCDs it doesn't make much sense. For this,
-the hiddev interface was designed. See Documentation/hid/hiddev.txt
+the hiddev interface was designed. See Documentation/hid/hiddev.rst
 for more information about it.
 
 The usage of the usbhid module is very simple, it takes no parameters,

MAINTAINERS

@@ -16432,7 +16432,7 @@ M:	Benjamin Tissoires <benjamin.tissoires@redhat.com>
 L:	linux-usb@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git
 S:	Maintained
-F:	Documentation/hid/hiddev.txt
+F:	Documentation/hid/hiddev.rst
 F:	drivers/hid/usbhid/
 
 USB INTEL XHCI ROLE MUX DRIVER

drivers/hid/hid-ids.h

@@ -1157,6 +1157,7 @@
 #define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO01	0x0042
 #define USB_DEVICE_ID_UGEE_TABLET_G5		0x0074
 #define USB_DEVICE_ID_UGEE_TABLET_EX07S		0x0071
+#define USB_DEVICE_ID_UGEE_TABLET_RAINBOW_CV720	0x0055
 
 #define USB_VENDOR_ID_UNITEC	0x227d
 #define USB_DEVICE_ID_UNITEC_USB_TOUCH_0709	0x0709
@@ -1241,6 +1242,7 @@
 #define USB_DEVICE_ID_PRIMAX_KEYBOARD	0x4e05
 #define USB_DEVICE_ID_PRIMAX_REZEL	0x4e72
 #define USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4D0F	0x4d0f
+#define USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4D65	0x4d65
 #define USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4E22	0x4e22
 
 

drivers/hid/hid-lg.c

@@ -869,8 +869,6 @@ static void lg_remove(struct hid_device *hdev)
 }
 
 static const struct hid_device_id lg_devices[] = {
-	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER),
-		.driver_data = LG_RDESC | LG_WIRELESS },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER),
 		.driver_data = LG_RDESC | LG_WIRELESS },
 

drivers/hid/hid-logitech-dj.c

@@ -1103,12 +1103,14 @@ static int logi_dj_recv_send_report(struct dj_receiver_dev *djrcv_dev,
 
 static int logi_dj_recv_query_hidpp_devices(struct dj_receiver_dev *djrcv_dev)
 {
-	const u8 template[] = {REPORT_ID_HIDPP_SHORT,
+	static const u8 template[] = {
+		REPORT_ID_HIDPP_SHORT,
 		HIDPP_RECEIVER_INDEX,
 		HIDPP_SET_REGISTER,
 		HIDPP_REG_CONNECTION_STATE,
 		HIDPP_FAKE_DEVICE_ARRIVAL,
-			       0x00, 0x00};
+		0x00, 0x00
+	};
 	u8 *hidpp_report;
 	int retval;
 
@@ -1123,7 +1125,7 @@ static int logi_dj_recv_query_hidpp_devices(struct dj_receiver_dev *djrcv_dev)
 				    HID_REQ_SET_REPORT);
 
 	kfree(hidpp_report);
-	return 0;
+	return retval;
 }
 
 static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev)
@@ -1834,6 +1836,9 @@ static const struct hid_device_id logi_dj_receivers[] = {
 	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
 		USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_GAMING),
 	 .driver_data = recvr_type_gaming_hidpp},
+	{ /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */
+	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER),
+	 .driver_data = recvr_type_27mhz},
 	{ /* Logitech 27 MHz HID++ 1.0 receiver (0xc517) */
 	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
 		USB_DEVICE_ID_S510_RECEIVER_2),

drivers/hid/hid-logitech-hidpp.c

@@ -2858,7 +2858,7 @@ static u8 *hidpp10_consumer_keys_report_fixup(struct hidpp_device *hidpp,
 					      u8 *_rdesc, unsigned int *rsize)
 {
 	/* Note 0 terminated so we can use strnstr to search for this. */
-	const char consumer_rdesc_start[] = {
+	static const char consumer_rdesc_start[] = {
 		0x05, 0x0C,	/* USAGE_PAGE (Consumer Devices)       */
 		0x09, 0x01,	/* USAGE (Consumer Control)            */
 		0xA1, 0x01,	/* COLLECTION (Application)            */

drivers/hid/hid-quirks.c

@@ -130,6 +130,7 @@ static const struct hid_device_id hid_quirks[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_USB_OPTICAL_MOUSE), HID_QUIRK_ALWAYS_POLL },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_MOUSE_4D22), HID_QUIRK_ALWAYS_POLL },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4D0F), HID_QUIRK_ALWAYS_POLL },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4D65), HID_QUIRK_ALWAYS_POLL },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4E22), HID_QUIRK_ALWAYS_POLL },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS), HID_QUIRK_NOGET },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3001), HID_QUIRK_NOGET },

drivers/hid/hid-uclogic-core.c

@@ -389,6 +389,8 @@ static const struct hid_device_id uclogic_devices[] = {
 				USB_DEVICE_ID_UGEE_TABLET_G5) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
 				USB_DEVICE_ID_UGEE_TABLET_EX07S) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
+				USB_DEVICE_ID_UGEE_TABLET_RAINBOW_CV720) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
 				USB_DEVICE_ID_UGEE_XPPEN_TABLET_G540) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,

drivers/hid/hid-uclogic-params.c

@@ -1001,6 +1001,8 @@ int uclogic_params_init(struct uclogic_params *params,
 		     USB_DEVICE_ID_UGEE_XPPEN_TABLET_G540):
 	case VID_PID(USB_VENDOR_ID_UGEE,
 		     USB_DEVICE_ID_UGEE_XPPEN_TABLET_G640):
+	case VID_PID(USB_VENDOR_ID_UGEE,
+		     USB_DEVICE_ID_UGEE_TABLET_RAINBOW_CV720):
 		/* If this is the pen interface */
 		if (bInterfaceNumber == 1) {
 			/* Probe v1 pen parameters */

drivers/hid/intel-ish-hid/ipc/pci-ish.c

@@ -184,6 +184,7 @@ static void ish_remove(struct pci_dev *pdev)
 	struct ishtp_device *ishtp_dev = pci_get_drvdata(pdev);
 
 	ishtp_bus_remove_all_clients(ishtp_dev, false);
+	pdev->dev_flags &= ~PCI_DEV_FLAGS_NO_D3;
 	ish_device_disable(ishtp_dev);
 }
 

drivers/hid/wacom_sys.c

@@ -304,18 +304,23 @@ static void wacom_feature_mapping(struct hid_device *hdev,
 	wacom_hid_usage_quirk(hdev, field, usage);
 
 	switch (equivalent_usage) {
+	case WACOM_HID_WD_TOUCH_RING_SETTING:
+		wacom->generic_has_leds = true;
+		break;
 	case HID_DG_CONTACTMAX:
 		/* leave touch_max as is if predefined */
 		if (!features->touch_max) {
 			/* read manually */
-			data = kzalloc(2, GFP_KERNEL);
+			n = hid_report_len(field->report);
+			data = hid_alloc_report_buf(field->report, GFP_KERNEL);
 			if (!data)
 				break;
 			data[0] = field->report->id;
 			ret = wacom_get_report(hdev, HID_FEATURE_REPORT,
-						data, 2, WAC_CMD_RETRIES);
-			if (ret == 2) {
-				features->touch_max = data[1];
+					       data, n, WAC_CMD_RETRIES);
+			if (ret == n) {
+				ret = hid_report_raw_event(hdev,
+					HID_FEATURE_REPORT, data, n, 0);
 			} else {
 				features->touch_max = 16;
 				hid_warn(hdev, "wacom_feature_mapping: "

drivers/hid/wacom_wac.h

@@ -141,6 +141,7 @@
 #define WACOM_HID_WD_OFFSETBOTTOM       (WACOM_HID_UP_WACOMDIGITIZER | 0x0d33)
 #define WACOM_HID_WD_DATAMODE           (WACOM_HID_UP_WACOMDIGITIZER | 0x1002)
 #define WACOM_HID_WD_DIGITIZERINFO      (WACOM_HID_UP_WACOMDIGITIZER | 0x1013)
+#define WACOM_HID_WD_TOUCH_RING_SETTING (WACOM_HID_UP_WACOMDIGITIZER | 0x1032)
 #define WACOM_HID_UP_G9                 0xff090000
 #define WACOM_HID_G9_PEN                (WACOM_HID_UP_G9 | 0x02)
 #define WACOM_HID_G9_TOUCHSCREEN        (WACOM_HID_UP_G9 | 0x11)
@@ -154,6 +155,7 @@
 #define WACOM_HID_WT_SERIALNUMBER       (WACOM_HID_UP_WACOMTOUCH | 0x5b)
 #define WACOM_HID_WT_X                  (WACOM_HID_UP_WACOMTOUCH | 0x130)
 #define WACOM_HID_WT_Y                  (WACOM_HID_UP_WACOMTOUCH | 0x131)
+#define WACOM_HID_WT_REPORT_VALID       (WACOM_HID_UP_WACOMTOUCH | 0x1d0)
 
 #define WACOM_BATTERY_USAGE(f)	(((f)->hid == HID_DG_BATTERYSTRENGTH) || \
 				 ((f)->hid == WACOM_HID_WD_BATTERY_CHARGING) || \
@@ -210,6 +212,7 @@ enum {
 	INTUOSPM,
 	INTUOSPL,
 	INTUOSP2_BT,
+	INTUOSP2S_BT,
 	INTUOSHT3_BT,
 	WACOM_21UX2,
 	WACOM_22HD,