Merge tag 'linux-can-next-for-6.9-20240220' of...

Merge tag 'linux-can-next-for-6.9-20240220' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2024-02-20

this is a pull request of 9 patches for net-next/master.

The first patch is by Francesco Dolcini and removes a redundant check
for pm_clock_support from the m_can driver.

Martin Hundebøll contributes 3 patches to the m_can/tcan4x5x driver to
allow resume upon RX of a CAN frame.

3 patches by Srinivas Goud add support for ECC statistics to the
xilinx_can driver.

The last 2 patches are by Oliver Hartkopp and me, target the CAN RAW
protocol and fix an error in the getsockopt() for CAN-XL introduced in
the previous pull request to net-next (linux-can-next-for-6.9-20240213).

linux-can-next-for-6.9-20240220

* tag 'linux-can-next-for-6.9-20240220' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
  can: raw: raw_getsockopt(): reduce scope of err
  can: raw: fix getsockopt() for new CAN_RAW_XL_VCID_OPTS
  can: xilinx_can: Add ethtool stats interface for ECC errors
  can: xilinx_can: Add ECC support
  dt-bindings: can: xilinx_can: Add 'xlnx,has-ecc' optional property
  can: tcan4x5x: support resuming from rx interrupt signal
  can: m_can: allow keeping the transceiver running in suspend
  dt-bindings: can: tcan4x5x: Document the wakeup-source flag
  can: m_can: remove redundant check for pm_clock_support
====================

Link: https://lore.kernel.org/r/20240220085130.2936533-1-mkl@pengutronix.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Documentation/devicetree/bindings/net/can/tcan4x5x.txt

@@ -28,6 +28,8 @@ Optional properties:
 			      available with tcan4552/4553.
 	- device-wake-gpios: Wake up GPIO to wake up the TCAN device. Not
 			     available with tcan4552/4553.
+	- wakeup-source: Leave the chip running when suspended, and configure
+			 the RX interrupt to wake up the device.
 
 Example:
 tcan4x5x: tcan4x5x@0 {
@@ -42,4 +44,5 @@ tcan4x5x: tcan4x5x@0 {
 		device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+		wakeup-source;
 };

Documentation/devicetree/bindings/net/can/xilinx,can.yaml

@@ -49,6 +49,10 @@ properties:
   resets:
     maxItems: 1
 
+  xlnx,has-ecc:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: CAN TX_OL, TX_TL and RX FIFOs have ECC support(AXI CAN)
+
 required:
   - compatible
   - reg
@@ -137,6 +141,7 @@ examples:
         interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
         tx-fifo-depth = <0x40>;
         rx-fifo-depth = <0x40>;
+        xlnx,has-ecc;
     };
 
   - |

drivers/net/can/m_can/m_can.c

@@ -2312,11 +2312,9 @@ int m_can_class_register(struct m_can_classdev *cdev)
 		}
 	}
 
-	if (cdev->pm_clock_support) {
 	ret = m_can_clk_start(cdev);
 	if (ret)
 		return ret;
-	}
 
 	if (cdev->is_peripheral) {
 		ret = can_rx_offload_add_manual(cdev->net, &cdev->offload,
@@ -2384,7 +2382,15 @@ int m_can_class_suspend(struct device *dev)
 	if (netif_running(ndev)) {
 		netif_stop_queue(ndev);
 		netif_device_detach(ndev);
+
+		/* leave the chip running with rx interrupt enabled if it is
+		 * used as a wake-up source.
+		 */
+		if (cdev->pm_wake_source)
+			m_can_write(cdev, M_CAN_IE, IR_RF0N);
+		else
 			m_can_stop(ndev);
+
 		m_can_clk_stop(cdev);
 	}
 
@@ -2411,12 +2417,16 @@ int m_can_class_resume(struct device *dev)
 		ret = m_can_clk_start(cdev);
 		if (ret)
 			return ret;
+
+		if (cdev->pm_wake_source) {
+			m_can_write(cdev, M_CAN_IE, cdev->active_interrupts);
+		} else {
 			ret  = m_can_start(ndev);
 			if (ret) {
 				m_can_clk_stop(cdev);
-
 				return ret;
 			}
+		}
 
 		netif_device_attach(ndev);
 		netif_start_queue(ndev);

drivers/net/can/m_can/m_can.h

@@ -97,6 +97,7 @@ struct m_can_classdev {
 	u32 irqstatus;
 
 	int pm_clock_support;
+	int pm_wake_source;
 	int is_peripheral;
 
 	// Cached M_CAN_IE register content

drivers/net/can/m_can/m_can_pci.c

@@ -125,6 +125,7 @@ static int m_can_pci_probe(struct pci_dev *pci, const struct pci_device_id *id)
 	mcan_class->dev = &pci->dev;
 	mcan_class->net->irq = pci_irq_vector(pci, 0);
 	mcan_class->pm_clock_support = 1;
+	mcan_class->pm_wake_source = 0;
 	mcan_class->can.clock.freq = id->driver_data;
 	mcan_class->ops = &m_can_pci_ops;
 

drivers/net/can/m_can/m_can_platform.c

@@ -139,6 +139,7 @@ static int m_can_plat_probe(struct platform_device *pdev)
 
 	mcan_class->net->irq = irq;
 	mcan_class->pm_clock_support = 1;
+	mcan_class->pm_wake_source = 0;
 	mcan_class->can.clock.freq = clk_get_rate(mcan_class->cclk);
 	mcan_class->dev = &pdev->dev;
 	mcan_class->transceiver = transceiver;

drivers/net/can/m_can/tcan4x5x-core.c

@@ -411,6 +411,7 @@ static int tcan4x5x_can_probe(struct spi_device *spi)
 	priv->spi = spi;
 
 	mcan_class->pm_clock_support = 0;
+	mcan_class->pm_wake_source = device_property_read_bool(&spi->dev, "wakeup-source");
 	mcan_class->can.clock.freq = freq;
 	mcan_class->dev = &spi->dev;
 	mcan_class->ops = &tcan4x5x_ops;
@@ -459,6 +460,9 @@ static int tcan4x5x_can_probe(struct spi_device *spi)
 		goto out_power;
 	}
 
+	if (mcan_class->pm_wake_source)
+		device_init_wakeup(&spi->dev, true);
+
 	ret = m_can_class_register(mcan_class);
 	if (ret) {
 		dev_err(&spi->dev, "Failed registering m_can device %pe\n",
@@ -487,6 +491,29 @@ static void tcan4x5x_can_remove(struct spi_device *spi)
 	m_can_class_free_dev(priv->cdev.net);
 }
 
+static int __maybe_unused tcan4x5x_suspend(struct device *dev)
+{
+	struct m_can_classdev *cdev = dev_get_drvdata(dev);
+	struct spi_device *spi = to_spi_device(dev);
+
+	if (cdev->pm_wake_source)
+		enable_irq_wake(spi->irq);
+
+	return m_can_class_suspend(dev);
+}
+
+static int __maybe_unused tcan4x5x_resume(struct device *dev)
+{
+	struct m_can_classdev *cdev = dev_get_drvdata(dev);
+	struct spi_device *spi = to_spi_device(dev);
+	int ret = m_can_class_resume(dev);
+
+	if (cdev->pm_wake_source)
+		disable_irq_wake(spi->irq);
+
+	return ret;
+}
+
 static const struct of_device_id tcan4x5x_of_match[] = {
 	{
 		.compatible = "ti,tcan4x5x",
@@ -505,11 +532,15 @@ static const struct spi_device_id tcan4x5x_id_table[] = {
 };
 MODULE_DEVICE_TABLE(spi, tcan4x5x_id_table);
 
+static const struct dev_pm_ops tcan4x5x_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(tcan4x5x_suspend, tcan4x5x_resume)
+};
+
 static struct spi_driver tcan4x5x_can_driver = {
 	.driver = {
 		.name = KBUILD_MODNAME,
 		.of_match_table = tcan4x5x_of_match,
-		.pm = NULL,
+		.pm = &tcan4x5x_pm_ops,
 	},
 	.id_table = tcan4x5x_id_table,
 	.probe = tcan4x5x_can_probe,

net/can/raw.c

@@ -756,7 +756,6 @@ static int raw_getsockopt(struct socket *sock, int level, int optname,
 	struct raw_sock *ro = raw_sk(sk);
 	int len;
 	void *val;
-	int err = 0;
 
 	if (level != SOL_CAN_RAW)
 		return -EINVAL;
@@ -766,7 +765,9 @@ static int raw_getsockopt(struct socket *sock, int level, int optname,
 		return -EINVAL;
 
 	switch (optname) {
-	case CAN_RAW_FILTER:
+	case CAN_RAW_FILTER: {
+		int err = 0;
+
 		lock_sock(sk);
 		if (ro->count > 0) {
 			int fsize = ro->count * sizeof(struct can_filter);
@@ -791,7 +792,7 @@ static int raw_getsockopt(struct socket *sock, int level, int optname,
 		if (!err)
 			err = put_user(len, optlen);
 		return err;
-
+	}
 	case CAN_RAW_ERR_FILTER:
 		if (len > sizeof(can_err_mask_t))
 			len = sizeof(can_err_mask_t);
@@ -822,7 +823,9 @@ static int raw_getsockopt(struct socket *sock, int level, int optname,
 		val = &ro->xl_frames;
 		break;
 
-	case CAN_RAW_XL_VCID_OPTS:
+	case CAN_RAW_XL_VCID_OPTS: {
+		int err = 0;
+
 		/* user space buffer to small for VCID opts? */
 		if (len < sizeof(ro->raw_vcid_opts)) {
 			/* return -ERANGE and needed space in optlen */
@@ -835,8 +838,10 @@ static int raw_getsockopt(struct socket *sock, int level, int optname,
 			if (copy_to_user(optval, &ro->raw_vcid_opts, len))
 				err = -EFAULT;
 		}
-		break;
-
+		if (!err)
+			err = put_user(len, optlen);
+		return err;
+	}
 	case CAN_RAW_JOIN_FILTERS:
 		if (len > sizeof(int))
 			len = sizeof(int);