Skip to content

L
linux
Commit 4944d2ca authored by Linus Walleij's avatar Linus Walleij
Browse files
Options

pinctrl: abx500: update device tree bindings 

After force converting the ABx500 bindings in the driver and
device tree sources, also update the binding documentation to
state that we are now using standard bindings.
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent eea11b0b
Show whitespace changes
Inline Side-by-side
Showing with 75 additions and 109 deletions
Documentation/devicetree/bindings/pinctrl/ste,abx500.txt
View file @ 4944d2ca
......@@ -8,42 +8,8 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
ST Ericsson's pin configuration nodes act as a container for an arbitrary number of
subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those pin(s)/group(s), and various pin configuration
parameters, such as input, output, pull up, pull down...
The name of each subnode is not important; all subnodes should be enumerated
and processed purely based on their content.
Required subnode-properties:
- ste,pins : An array of strings. Each string contains the name of a pin or
group.
Optional subnode-properties:
- ste,function: A string containing the name of the function to mux to the
pin or group.
- generic pin configuration option to use. Example :
default_cfg {
ste,pins = "GPIO1";
bias-disable;
};
- ste,config: Handle of pin configuration node containing the generic
pinconfig options to use, as described in pinctrl-bindings.txt in
this directory. Example :
pcfg_bias_disable: pcfg_bias_disable {
bias-disable;
};
default_cfg {
ste,pins = "GPIO1";
ste.config = <&pcfg_bias_disable>;
};
ST Ericsson's pin configuration nodes use the generic pin multiplexing
and pin configuration bindings, see pinctrl-bindings.txt
Example board file extract:
......@@ -54,11 +20,11 @@ Example board file extract:
sysclkreq2 {
sysclkreq2_default_mode: sysclkreq2_default {
default_mux {
ste,function = "sysclkreq";
ste,pins = "sysclkreq2_d_1";
function = "sysclkreq";
groups = "sysclkreq2_d_1";
};
default_cfg {
ste,pins = "GPIO1";
pins = "GPIO1";
bias-disable;
};
};
......@@ -66,11 +32,11 @@ Example board file extract:
sysclkreq3 {
sysclkreq3_default_mode: sysclkreq3_default {
default_mux {
ste,function = "sysclkreq";
ste,pins = "sysclkreq3_d_1";
function = "sysclkreq";
groups = "sysclkreq3_d_1";
};
default_cfg {
ste,pins = "GPIO2";
pins = "GPIO2";
output-low;
};
};
......@@ -78,11 +44,11 @@ Example board file extract:
gpio3 {
gpio3_default_mode: gpio3_default {
default_mux {
ste,function = "gpio";
ste,pins = "gpio3_a_1";
function = "gpio";
groups = "gpio3_a_1";
};
default_cfg {
ste,pins = "GPIO3";
pins = "GPIO3";
output-low;
};
};
......@@ -90,11 +56,11 @@ Example board file extract:
sysclkreq6 {
sysclkreq6_default_mode: sysclkreq6_default {
default_mux {
ste,function = "sysclkreq";
ste,pins = "sysclkreq6_d_1";
function = "sysclkreq";
groups = "sysclkreq6_d_1";
};
default_cfg {
ste,pins = "GPIO4";
pins = "GPIO4";
bias-disable;
};
};
......@@ -102,11 +68,11 @@ Example board file extract:
pwmout1 {
pwmout1_default_mode: pwmout1_default {
default_mux {
ste,function = "pwmout";
ste,pins = "pwmout1_d_1";
function = "pwmout";
groups = "pwmout1_d_1";
};
default_cfg {
ste,pins = "GPIO14";
pins = "GPIO14";
output-low;
};
};
......@@ -114,11 +80,11 @@ Example board file extract:
pwmout2 {
pwmout2_default_mode: pwmout2_default {
pwmout2_default_mux {
ste,function = "pwmout";
ste,pins = "pwmout2_d_1";
function = "pwmout";
groups = "pwmout2_d_1";
};
pwmout2_default_cfg {
ste,pins = "GPIO15";
pins = "GPIO15";
output-low;
};
};
......@@ -126,11 +92,11 @@ Example board file extract:
pwmout3 {
pwmout3_default_mode: pwmout3_default {
pwmout3_default_mux {
ste,function = "pwmout";
ste,pins = "pwmout3_d_1";
function = "pwmout";
groups = "pwmout3_d_1";
};
pwmout3_default_cfg {
ste,pins = "GPIO16";
pins = "GPIO16";
output-low;
};
};
......@@ -139,15 +105,15 @@ Example board file extract:
adi1_default_mode: adi1_default {
adi1_default_mux {
ste,function = "adi1";
ste,pins = "adi1_d_1";
function = "adi1";
groups = "adi1_d_1";
};
adi1_default_cfg1 {
ste,pins = "GPIO17","GPIO19","GPIO20";
pins = "GPIO17","GPIO19","GPIO20";
bias-disable;
};
adi1_default_cfg2 {
ste,pins = "GPIO18";
pins = "GPIO18";
output-low;
};
};
......@@ -155,15 +121,15 @@ Example board file extract:
dmic12 {
dmic12_default_mode: dmic12_default {
dmic12_default_mux {
ste,function = "dmic";
ste,pins = "dmic12_d_1";
function = "dmic";
groups = "dmic12_d_1";
};
dmic12_default_cfg1 {
ste,pins = "GPIO27";
pins = "GPIO27";
output-low;
};
dmic12_default_cfg2 {
ste,pins = "GPIO28";
pins = "GPIO28";
bias-disable;
};
};
......@@ -171,15 +137,15 @@ Example board file extract:
dmic34 {
dmic34_default_mode: dmic34_default {
dmic34_default_mux {
ste,function = "dmic";
ste,pins = "dmic34_d_1";
function = "dmic";
groups = "dmic34_d_1";
};
dmic34_default_cfg1 {
ste,pins = "GPIO29";
pins = "GPIO29";
output-low;
};
dmic34_default_cfg2 {
ste,pins = "GPIO30";
pins = "GPIO30";
bias-disable;{
};
......@@ -188,15 +154,15 @@ Example board file extract:
dmic56 {
dmic56_default_mode: dmic56_default {
dmic56_default_mux {
ste,function = "dmic";
ste,pins = "dmic56_d_1";
function = "dmic";
groups = "dmic56_d_1";
};
dmic56_default_cfg1 {
ste,pins = "GPIO31";
pins = "GPIO31";
output-low;
};
dmic56_default_cfg2 {
ste,pins = "GPIO32";
pins = "GPIO32";
bias-disable;
};
};
......@@ -204,11 +170,11 @@ Example board file extract:
sysclkreq5 {
sysclkreq5_default_mode: sysclkreq5_default {
sysclkreq5_default_mux {
ste,function = "sysclkreq";
ste,pins = "sysclkreq5_d_1";
function = "sysclkreq";
groups = "sysclkreq5_d_1";
};
sysclkreq5_default_cfg {
ste,pins = "GPIO42";
pins = "GPIO42";
output-low;
};
};
......@@ -216,11 +182,11 @@ Example board file extract:
batremn {
batremn_default_mode: batremn_default {
batremn_default_mux {
ste,function = "batremn";
ste,pins = "batremn_d_1";
function = "batremn";
groups = "batremn_d_1";
};
batremn_default_cfg {
ste,pins = "GPIO43";
pins = "GPIO43";
bias-disable;
};
};
......@@ -228,11 +194,11 @@ Example board file extract:
service {
service_default_mode: service_default {
service_default_mux {
ste,function = "service";
ste,pins = "service_d_1";
function = "service";
groups = "service_d_1";
};
service_default_cfg {
ste,pins = "GPIO44";
pins = "GPIO44";
bias-disable;
};
};
......@@ -240,13 +206,13 @@ Example board file extract:
pwrctrl0 {
pwrctrl0_default_mux: pwrctrl0_mux {
pwrctrl0_default_mux {
ste,function = "pwrctrl";
ste,pins = "pwrctrl0_d_1";
function = "pwrctrl";
groups = "pwrctrl0_d_1";
};
};
pwrctrl0_default_mode: pwrctrl0_default {
pwrctrl0_default_cfg {
ste,pins = "GPIO45";
pins = "GPIO45";
bias-disable;
};
};
......@@ -254,13 +220,13 @@ Example board file extract:
pwrctrl1 {
pwrctrl1_default_mux: pwrctrl1_mux {
pwrctrl1_default_mux {
ste,function = "pwrctrl";
ste,pins = "pwrctrl1_d_1";
function = "pwrctrl";
groups = "pwrctrl1_d_1";
};
};
pwrctrl1_default_mode: pwrctrl1_default {
pwrctrl1_default_cfg {
ste,pins = "GPIO46";
pins = "GPIO46";
bias-disable;
};
};
......@@ -268,11 +234,11 @@ Example board file extract:
pwmextvibra1 {
pwmextvibra1_default_mode: pwmextvibra1_default {
pwmextvibra1_default_mux {
ste,function = "pwmextvibra";
ste,pins = "pwmextvibra1_d_1";
function = "pwmextvibra";
groups = "pwmextvibra1_d_1";
};
pwmextvibra1_default_cfg {
ste,pins = "GPIO47";
pins = "GPIO47";
bias-disable;
};
};
......@@ -280,11 +246,11 @@ Example board file extract:
pwmextvibra2 {
pwmextvibra2_default_mode: pwmextvibra2_default {
pwmextvibra2_default_mux {
ste,function = "pwmextvibra";
ste,pins = "pwmextvibra2_d_1";
function = "pwmextvibra";
groups = "pwmextvibra2_d_1";
};
pwmextvibra1_default_cfg {
ste,pins = "GPIO48";
pins = "GPIO48";
bias-disable;
};
};
......@@ -292,11 +258,11 @@ Example board file extract:
gpio51 {
gpio51_default_mode: gpio51_default {
gpio51_default_mux {
ste,function = "gpio";
ste,pins = "gpio51_a_1";
function = "gpio";
groups = "gpio51_a_1";
};
gpio51_default_cfg {
ste,pins = "GPIO51";
pins = "GPIO51";
output-low;
};
};
......@@ -304,11 +270,11 @@ Example board file extract:
gpio52 {
gpio52_default_mode: gpio52_default {
gpio52_default_mux {
ste,function = "gpio";
ste,pins = "gpio52_a_1";
function = "gpio";
groups = "gpio52_a_1";
};
gpio52_default_cfg {
ste,pins = "GPIO52";
pins = "GPIO52";
bias-pull-down;
};
};
......@@ -316,11 +282,11 @@ Example board file extract:
gpio53 {
gpio53_default_mode: gpio53_default {
gpio53_default_mux {
ste,function = "gpio";
ste,pins = "gpio53_a_1";
function = "gpio";
groups = "gpio53_a_1";
};
gpio53_default_cfg {
ste,pins = "GPIO53";
pins = "GPIO53";
bias-pull-down;
};
};
......@@ -328,11 +294,11 @@ Example board file extract:
gpio54 {
gpio54_default_mode: gpio54_default {
gpio54_default_mux {
ste,function = "gpio";
ste,pins = "gpio54_a_1";
function = "gpio";
groups = "gpio54_a_1";
};
gpio54_default_cfg {
ste,pins = "GPIO54";
pins = "GPIO54";
output-low;
};
};
......@@ -340,11 +306,11 @@ Example board file extract:
pdmclkdat {
pdmclkdat_default_mode: pdmclkdat_default {
pdmclkdat_default_mux {
ste,function = "pdm";
ste,pins = "pdmclkdat_d_1";
function = "pdm";
groups = "pdmclkdat_d_1";
};
pdmclkdat_default_cfg {
ste,pins = "GPIO55", "GPIO56";
pins = "GPIO55", "GPIO56";
bias-disable;
};
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7