Commit 496a73bb authored by Ben Skeggs's avatar Ben Skeggs

drm/nv50/pm: use hwsq for engine reclocking too

Idea from Martin Peres, different implementation by me.

v2: Martin Peres:
- fix mast calculation
Signed-off-by: default avatarBen Skeggs <bskeggs@redhat.com>
Signed-off-by: default avatarMartin Peres <martin.peres@labri.fr>
parent e495d0d7
......@@ -354,21 +354,12 @@ nv50_pm_clocks_get(struct drm_device *dev, struct nouveau_pm_level *perflvl)
struct nv50_pm_state {
struct nouveau_pm_level *perflvl;
struct hwsq_ucode eclk_hwsq;
struct hwsq_ucode mclk_hwsq;
u32 mscript;
u32 mmast;
u32 mctrl;
u32 mcoef;
u32 emast;
u32 nctrl;
u32 ncoef;
u32 sctrl;
u32 scoef;
u32 amast;
u32 pdivs;
};
static u32
......@@ -598,10 +589,11 @@ nv50_pm_clocks_pre(struct drm_device *dev, struct nouveau_pm_level *perflvl)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nv50_pm_state *info;
struct hwsq_ucode *hwsq;
struct pll_lims pll;
u32 out, mast, divs, ctrl;
int clk, ret = -EINVAL;
int N, M, P1, P2;
u32 out;
if (dev_priv->chipset == 0xaa ||
dev_priv->chipset == 0xac)
......@@ -622,41 +614,32 @@ nv50_pm_clocks_pre(struct drm_device *dev, struct nouveau_pm_level *perflvl)
info->mscript = perflvl->memscript;
}
/* core: for the moment at least, always use nvpll */
clk = calc_pll(dev, 0x4028, &pll, perflvl->core, &N, &M, &P1);
if (clk == 0)
goto error;
divs = read_div(dev);
mast = info->mmast;
info->emast = 0x00000003;
info->nctrl = 0x80000000 | (P1 << 19) | (P1 << 16);
info->ncoef = (N << 8) | M;
/* start building HWSQ script for engine reclocking */
hwsq = &info->eclk_hwsq;
hwsq_init(hwsq);
hwsq_setf(hwsq, 0x10, 0); /* disable bus access */
hwsq_op5f(hwsq, 0x00, 0x01); /* wait for access disabled? */
/* shader: tie to nvclk if possible, otherwise use spll. have to be
* very careful that the shader clock is at least twice the core, or
* some chipsets will be very unhappy. i expect most or all of these
* cases will be handled by tying to nvclk, but it's possible there's
* corners
*/
if (P1-- && perflvl->shader == (perflvl->core << 1)) {
info->emast |= 0x00000020;
info->sctrl = 0x00000000 | (P1 << 19) | (P1 << 16);
info->scoef = nv_rd32(dev, 0x004024);
} else {
clk = calc_pll(dev, 0x4020, &pll, perflvl->shader, &N, &M, &P1);
if (clk == 0)
goto error;
/* vdec/dom6: switch to "safe" clocks temporarily */
if (perflvl->vdec) {
mast &= ~0x00000c00;
divs &= ~0x00000700;
}
info->emast |= 0x00000030;
info->sctrl = 0x80000000 | (P1 << 19) | (P1 << 16);
info->scoef = (N << 8) | M;
if (perflvl->dom6) {
mast &= ~0x0c000000;
divs &= ~0x00000007;
}
hwsq_wr32(hwsq, 0x00c040, mast);
/* vdec: avoid modifying xpll until we know exactly how the other
* clock domains work, i suspect at least some of them can also be
* tied to xpll...
*/
info->amast = nv_rd32(dev, 0x00c040);
info->pdivs = read_div(dev);
if (perflvl->vdec) {
/* see how close we can get using nvclk as a source */
clk = calc_div(perflvl->core, perflvl->vdec, &P1);
......@@ -669,16 +652,14 @@ nv50_pm_clocks_pre(struct drm_device *dev, struct nouveau_pm_level *perflvl)
out = calc_div(out, perflvl->vdec, &P2);
/* select whichever gets us closest */
info->amast &= ~0x00000c00;
info->pdivs &= ~0x00000700;
if (abs((int)perflvl->vdec - clk) <=
abs((int)perflvl->vdec - out)) {
if (dev_priv->chipset != 0x98)
info->amast |= 0x00000c00;
info->pdivs |= P1 << 8;
mast |= 0x00000c00;
divs |= P1 << 8;
} else {
info->amast |= 0x00000800;
info->pdivs |= P2 << 8;
mast |= 0x00000800;
divs |= P2 << 8;
}
}
......@@ -686,21 +667,82 @@ nv50_pm_clocks_pre(struct drm_device *dev, struct nouveau_pm_level *perflvl)
* of the host clock frequency
*/
if (perflvl->dom6) {
info->amast &= ~0x0c000000;
if (clk_same(perflvl->dom6, read_clk(dev, clk_src_href))) {
info->amast |= 0x00000000;
mast |= 0x00000000;
} else
if (clk_same(perflvl->dom6, read_clk(dev, clk_src_hclk))) {
info->amast |= 0x08000000;
mast |= 0x08000000;
} else {
clk = read_clk(dev, clk_src_hclk) * 3;
clk = calc_div(clk, perflvl->dom6, &P1);
info->amast |= 0x0c000000;
info->pdivs = (info->pdivs & ~0x00000007) | P1;
mast |= 0x0c000000;
divs |= P1;
}
}
/* vdec/dom6: complete switch to new clocks */
switch (dev_priv->chipset) {
case 0x92:
case 0x94:
case 0x96:
hwsq_wr32(hwsq, 0x004800, divs);
break;
default:
hwsq_wr32(hwsq, 0x004700, divs);
break;
}
hwsq_wr32(hwsq, 0x00c040, mast);
/* core/shader: make sure sclk/nvclk are disconnected from their
* PLLs (nvclk to dom6, sclk to hclk)
*/
if (dev_priv->chipset < 0x92)
mast = (mast & ~0x001000b0) | 0x00100080;
else
mast = (mast & ~0x000000b3) | 0x00000081;
hwsq_wr32(hwsq, 0x00c040, mast);
/* core: for the moment at least, always use nvpll */
clk = calc_pll(dev, 0x4028, &pll, perflvl->core, &N, &M, &P1);
if (clk == 0)
goto error;
ctrl = nv_rd32(dev, 0x004028) & ~0xc03f0100;
mast &= ~0x00100000;
mast |= 3;
hwsq_wr32(hwsq, 0x004028, 0x80000000 | (P1 << 19) | (P1 << 16) | ctrl);
hwsq_wr32(hwsq, 0x00402c, (N << 8) | M);
/* shader: tie to nvclk if possible, otherwise use spll. have to be
* very careful that the shader clock is at least twice the core, or
* some chipsets will be very unhappy. i expect most or all of these
* cases will be handled by tying to nvclk, but it's possible there's
* corners
*/
ctrl = nv_rd32(dev, 0x004020) & ~0xc03f0100;
if (P1-- && perflvl->shader == (perflvl->core << 1)) {
hwsq_wr32(hwsq, 0x004020, (P1 << 19) | (P1 << 16) | ctrl);
hwsq_wr32(hwsq, 0x00c040, 0x00000020 | mast);
} else {
clk = calc_pll(dev, 0x4020, &pll, perflvl->shader, &N, &M, &P1);
if (clk == 0)
goto error;
ctrl |= 0x80000000;
hwsq_wr32(hwsq, 0x004020, (P1 << 19) | (P1 << 16) | ctrl);
hwsq_wr32(hwsq, 0x004024, (N << 8) | M);
hwsq_wr32(hwsq, 0x00c040, 0x00000030 | mast);
}
hwsq_setf(hwsq, 0x10, 1); /* enable bus access */
hwsq_op5f(hwsq, 0x00, 0x00); /* wait for access enabled? */
hwsq_fini(hwsq);
return info;
error:
kfree(info);
......@@ -708,7 +750,7 @@ nv50_pm_clocks_pre(struct drm_device *dev, struct nouveau_pm_level *perflvl)
}
static int
prog_mclk(struct drm_device *dev, struct hwsq_ucode *hwsq)
prog_hwsq(struct drm_device *dev, struct hwsq_ucode *hwsq)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
u32 hwsq_data, hwsq_kick;
......@@ -748,20 +790,17 @@ prog_mclk(struct drm_device *dev, struct hwsq_ucode *hwsq)
int
nv50_pm_clocks_set(struct drm_device *dev, void *data)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nv50_pm_state *info = data;
struct bit_entry M;
int ret = 0;
int ret = -EBUSY;
/* halt and idle execution engines */
nv_mask(dev, 0x002504, 0x00000001, 0x00000001);
if (!nv_wait(dev, 0x002504, 0x00000010, 0x00000010))
goto error;
goto resume;
/* memory: it is *very* important we change this first, the ucode
* we build in pre() now has hardcoded 0xc040 values, which can't
* change before we execute it or the engine clocks may end up
* messed up.
/* program memory clock, if necessary - must come before engine clock
* reprogramming due to how we construct the hwsq scripts in pre()
*/
if (info->mclk_hwsq.len) {
/* execute some scripts that do ??? from the vbios.. */
......@@ -775,42 +814,14 @@ nv50_pm_clocks_set(struct drm_device *dev, void *data)
nouveau_bios_init_exec(dev, info->mscript);
}
ret = prog_mclk(dev, &info->mclk_hwsq);
ret = prog_hwsq(dev, &info->mclk_hwsq);
if (ret)
goto resume;
}
/* reclock vdec/dom6 */
nv_mask(dev, 0x00c040, 0x00000c00, 0x00000000);
switch (dev_priv->chipset) {
case 0x92:
case 0x94:
case 0x96:
nv_mask(dev, 0x004800, 0x00000707, info->pdivs);
break;
default:
nv_mask(dev, 0x004700, 0x00000707, info->pdivs);
break;
}
nv_mask(dev, 0x00c040, 0x0c000c00, info->amast);
/* core/shader: make sure sclk/nvclk are disconnected from their
* plls (nvclk to dom6, sclk to hclk), modify the plls, and
* reconnect sclk/nvclk to their new clock source
*/
if (dev_priv->chipset < 0x92)
nv_mask(dev, 0x00c040, 0x001000b0, 0x00100080); /* grrr! */
else
nv_mask(dev, 0x00c040, 0x000000b3, 0x00000081);
nv_mask(dev, 0x004020, 0xc03f0100, info->sctrl);
nv_wr32(dev, 0x004024, info->scoef);
nv_mask(dev, 0x004028, 0xc03f0100, info->nctrl);
nv_wr32(dev, 0x00402c, info->ncoef);
nv_mask(dev, 0x00c040, 0x00100033, info->emast);
/* program engine clocks */
ret = prog_hwsq(dev, &info->eclk_hwsq);
goto resume;
error:
ret = -EBUSY;
resume:
nv_mask(dev, 0x002504, 0x00000001, 0x00000000);
kfree(info);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment