i3c: master: svc: add NACK check after start byte sent

Add NACK check after start byte is sent.
It is possible to detect early that a device is not on the bus
and avoid invalid transmissions thereafter.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230517033030.3068085-3-xiaoning.wang@nxp.comSigned-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

drivers/i3c/master/svc-i3c-master.c

@@ -92,6 +92,7 @@
 #define SVC_I3C_MINTCLR      0x094
 #define SVC_I3C_MINTMASKED   0x098
 #define SVC_I3C_MERRWARN     0x09C
+#define   SVC_I3C_MERRWARN_NACK BIT(2)
 #define SVC_I3C_MDMACTRL     0x0A0
 #define SVC_I3C_MDATACTRL    0x0AC
 #define   SVC_I3C_MDATACTRL_FLUSHTB BIT(0)
@@ -1014,6 +1015,11 @@ static int svc_i3c_master_xfer(struct svc_i3c_master *master,
 	if (ret)
 		goto emit_stop;
 
+	if (readl(master->regs + SVC_I3C_MERRWARN) & SVC_I3C_MERRWARN_NACK) {
+		ret = -ENXIO;
+		goto emit_stop;
+	}
+
 	if (rnw)
 		ret = svc_i3c_master_read(master, in, xfer_len);
 	else