Skip to content

L
linux
Commit 49c1a163 authored by Krzysztof Kozlowski's avatar Krzysztof Kozlowski Committed by Kukjin Kim
Browse files
Options

ARM: dts: Use labels for overriding nodes in exynos4412-odroid 

Usage of labels instead of full paths reduces possible mistakes when
overriding nodes.
Signed-off-by: default avatarKrzysztof Kozlowski <k.kozlowski.k@gmail.com>

For thermal zones:
Acked-by: default avatarEduardo Valentin <edubezval@gmail.com>
Signed-off-by: default avatarKukjin Kim <kgene@kernel.org>
parent 08c4b441
Hide whitespace changes
Inline Side-by-side
Showing with 374 additions and 374 deletions
arch/arm/boot/dts/exynos4412-odroid-common.dtsi
View file @ 49c1a163
...@@ -38,16 +38,6 @@ power_key { ...@@ -38,16 +38,6 @@ power_key {
}; };
}; };
i2s0: i2s@03830000 {
pinctrl-0 = <&i2s0_bus>;
pinctrl-names = "default";
status = "okay";
clocks = <&clock_audss EXYNOS_I2S_BUS>,
<&clock_audss EXYNOS_DOUT_AUD_BUS>,
<&clock_audss EXYNOS_SCLK_I2S>;
clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
};
sound: sound { sound: sound {
compatible = "simple-audio-card"; compatible = "simple-audio-card";
assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
...@@ -83,427 +73,437 @@ emmc_pwrseq: pwrseq { ...@@ -83,427 +73,437 @@ emmc_pwrseq: pwrseq {
reset-gpios = <&gpk1 2 1>; reset-gpios = <&gpk1 2 1>;
}; };
mmc@12550000 {
pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
pinctrl-names = "default";
vmmc-supply = <&ldo20_reg &buck8_reg>;
mmc-pwrseq = <&emmc_pwrseq>;
status = "okay";
num-slots = <1>;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
bus-width = <8>;
cap-mmc-highspeed;
};
watchdog@10060000 {
status = "okay";
};
rtc@10070000 {
status = "okay";
clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
clock-names = "rtc", "rtc_src";
};
g2d@10800000 {
status = "okay";
};
camera { camera {
status = "okay"; status = "okay";
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <>; pinctrl-0 = <>;
};
fimc_0: fimc@11800000 { fixed-rate-clocks {
status = "okay"; xxti {
assigned-clocks = <&clock CLK_MOUT_FIMC0>, compatible = "samsung,clock-xxti";
<&clock CLK_SCLK_FIMC0>; clock-frequency = <0>;
assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
assigned-clock-rates = <0>, <176000000>;
};
fimc_1: fimc@11810000 {
status = "okay";
assigned-clocks = <&clock CLK_MOUT_FIMC1>,
<&clock CLK_SCLK_FIMC1>;
assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
assigned-clock-rates = <0>, <176000000>;
}; };
fimc_2: fimc@11820000 { xusbxti {
status = "okay"; compatible = "samsung,clock-xusbxti";
assigned-clocks = <&clock CLK_MOUT_FIMC2>, clock-frequency = <24000000>;
<&clock CLK_SCLK_FIMC2>;
assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
assigned-clock-rates = <0>, <176000000>;
}; };
};
fimc_3: fimc@11830000 { thermal-zones {
status = "okay"; cpu_thermal: cpu-thermal {
assigned-clocks = <&clock CLK_MOUT_FIMC3>, cooling-maps {
<&clock CLK_SCLK_FIMC3>; map0 {
assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; /* Corresponds to 800MHz at freq_table */
assigned-clock-rates = <0>, <176000000>; cooling-device = <&cpu0 7 7>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
cooling-device = <&cpu0 13 13>;
};
};
}; };
}; };
};
sdhci@12530000 { /* RSTN signal for eMMC */
bus-width = <4>; &sd1_cd {
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; samsung,pin-pud = <0>;
pinctrl-names = "default"; samsung,pin-drv = <0>;
vmmc-supply = <&ldo4_reg &ldo21_reg>; };
cd-gpios = <&gpk2 2 0>;
cd-inverted;
status = "okay";
};
serial@13800000 { &pinctrl_1 {
status = "okay"; gpio_power_key: power_key {
samsung,pins = "gpx1-3";
samsung,pin-pud = <0>;
}; };
serial@13810000 { max77686_irq: max77686-irq {
status = "okay"; samsung,pins = "gpx3-2";
samsung,pin-function = <0>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
}; };
fixed-rate-clocks { hdmi_hpd: hdmi-hpd {
xxti { samsung,pins = "gpx3-7";
compatible = "samsung,clock-xxti"; samsung,pin-pud = <1>;
clock-frequency = <0>;
};
xusbxti {
compatible = "samsung,clock-xusbxti";
clock-frequency = <24000000>;
};
}; };
};
i2c@13860000 { &ehci {
pinctrl-0 = <&i2c0_bus>; status = "okay";
pinctrl-names = "default"; };
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <400000>;
status = "okay";
usb3503: usb3503@08 { &exynos_usbphy {
compatible = "smsc,usb3503"; status = "okay";
reg = <0x08>; };
intn-gpios = <&gpx3 0 0>; &fimc_0 {
connect-gpios = <&gpx3 4 0>; status = "okay";
reset-gpios = <&gpx3 5 0>; assigned-clocks = <&clock CLK_MOUT_FIMC0>,
initial-mode = <1>; <&clock CLK_SCLK_FIMC0>;
}; assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
assigned-clock-rates = <0>, <176000000>;
};
max77686: pmic@09 { &fimc_1 {
compatible = "maxim,max77686"; status = "okay";
interrupt-parent = <&gpx3>; assigned-clocks = <&clock CLK_MOUT_FIMC1>,
interrupts = <2 0>; <&clock CLK_SCLK_FIMC1>;
pinctrl-names = "default"; assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
pinctrl-0 = <&max77686_irq>; assigned-clock-rates = <0>, <176000000>;
reg = <0x09>; };
#clock-cells = <1>;
voltage-regulators {
ldo1_reg: LDO1 {
regulator-name = "VDD_ALIVE_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo2_reg: LDO2 { &fimc_2 {
regulator-name = "VDDQ_M1_2_1.8V"; status = "okay";
regulator-min-microvolt = <1800000>; assigned-clocks = <&clock CLK_MOUT_FIMC2>,
regulator-max-microvolt = <1800000>; <&clock CLK_SCLK_FIMC2>;
regulator-always-on; assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
}; assigned-clock-rates = <0>, <176000000>;
};
ldo3_reg: LDO3 { &fimc_3 {
regulator-name = "VDDQ_EXT_1.8V"; status = "okay";
regulator-min-microvolt = <1800000>; assigned-clocks = <&clock CLK_MOUT_FIMC3>,
regulator-max-microvolt = <1800000>; <&clock CLK_SCLK_FIMC3>;
regulator-always-on; assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
}; assigned-clock-rates = <0>, <176000000>;
};
ldo4_reg: LDO4 { &g2d {
regulator-name = "VDDQ_MMC2_2.8V"; status = "okay";
regulator-min-microvolt = <2800000>; };
regulator-max-microvolt = <2800000>;
regulator-always-on;
regulator-boot-on;
};
ldo5_reg: LDO5 { &hdmi {
regulator-name = "VDDQ_MMC1_3_1.8V"; hpd-gpio = <&gpx3 7 0>;
regulator-min-microvolt = <1800000>; pinctrl-names = "default";
regulator-max-microvolt = <1800000>; pinctrl-0 = <&hdmi_hpd>;
regulator-always-on; vdd-supply = <&ldo8_reg>;
regulator-boot-on; vdd_osc-supply = <&ldo10_reg>;
}; vdd_pll-supply = <&ldo8_reg>;
ddc = <&i2c_2>;
status = "okay";
};
ldo6_reg: LDO6 { &hsotg {
regulator-name = "VDD10_MPLL_1.0V"; dr_mode = "peripheral";
regulator-min-microvolt = <1000000>; status = "okay";
regulator-max-microvolt = <1000000>; vusb_d-supply = <&ldo15_reg>;
regulator-always-on; vusb_a-supply = <&ldo12_reg>;
}; };
ldo7_reg: LDO7 { &i2c_0 {
regulator-name = "VDD10_XPLL_1.0V"; pinctrl-0 = <&i2c0_bus>;
regulator-min-microvolt = <1000000>; pinctrl-names = "default";
regulator-max-microvolt = <1000000>; samsung,i2c-sda-delay = <100>;
regulator-always-on; samsung,i2c-max-bus-freq = <400000>;
}; status = "okay";
usb3503: usb3503@08 {
compatible = "smsc,usb3503";
reg = <0x08>;
intn-gpios = <&gpx3 0 0>;
connect-gpios = <&gpx3 4 0>;
reset-gpios = <&gpx3 5 0>;
initial-mode = <1>;
};
ldo8_reg: ldo@8 { max77686: pmic@09 {
regulator-compatible = "LDO8"; compatible = "maxim,max77686";
regulator-name = "VDD10_HDMI_1.0V"; interrupt-parent = <&gpx3>;
regulator-min-microvolt = <1000000>; interrupts = <2 0>;
regulator-max-microvolt = <1000000>; pinctrl-names = "default";
}; pinctrl-0 = <&max77686_irq>;
reg = <0x09>;
#clock-cells = <1>;
voltage-regulators {
ldo1_reg: LDO1 {
regulator-name = "VDD_ALIVE_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo10_reg: ldo@10 { ldo2_reg: LDO2 {
regulator-compatible = "LDO10"; regulator-name = "VDDQ_M1_2_1.8V";
regulator-name = "VDDQ_MIPIHSI_1.8V"; regulator-min-microvolt = <1800000>;
regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>;
regulator-max-microvolt = <1800000>; regulator-always-on;
}; };
ldo11_reg: LDO11 { ldo3_reg: LDO3 {
regulator-name = "VDD18_ABB1_1.8V"; regulator-name = "VDDQ_EXT_1.8V";
regulator-min-microvolt = <1800000>; regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>; regulator-max-microvolt = <1800000>;
regulator-always-on; regulator-always-on;
}; };
ldo12_reg: LDO12 { ldo4_reg: LDO4 {
regulator-name = "VDD33_USB_3.3V"; regulator-name = "VDDQ_MMC2_2.8V";
regulator-min-microvolt = <3300000>; regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3300000>; regulator-max-microvolt = <2800000>;
regulator-always-on; regulator-always-on;
regulator-boot-on; regulator-boot-on;
}; };
ldo13_reg: LDO13 { ldo5_reg: LDO5 {
regulator-name = "VDDQ_C2C_W_1.8V"; regulator-name = "VDDQ_MMC1_3_1.8V";
regulator-min-microvolt = <1800000>; regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>; regulator-max-microvolt = <1800000>;
regulator-always-on; regulator-always-on;
regulator-boot-on; regulator-boot-on;
}; };
ldo14_reg: LDO14 { ldo6_reg: LDO6 {
regulator-name = "VDD18_ABB0_2_1.8V"; regulator-name = "VDD10_MPLL_1.0V";
regulator-min-microvolt = <1800000>; regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1800000>; regulator-max-microvolt = <1000000>;
regulator-always-on; regulator-always-on;
regulator-boot-on; };
};
ldo15_reg: LDO15 { ldo7_reg: LDO7 {
regulator-name = "VDD10_HSIC_1.0V"; regulator-name = "VDD10_XPLL_1.0V";
regulator-min-microvolt = <1000000>; regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>; regulator-max-microvolt = <1000000>;
regulator-always-on; regulator-always-on;
regulator-boot-on; };
};
ldo16_reg: LDO16 { ldo8_reg: ldo@8 {
regulator-name = "VDD18_HSIC_1.8V"; regulator-compatible = "LDO8";
regulator-min-microvolt = <1800000>; regulator-name = "VDD10_HDMI_1.0V";
regulator-max-microvolt = <1800000>; regulator-min-microvolt = <1000000>;
regulator-always-on; regulator-max-microvolt = <1000000>;
regulator-boot-on; };
};
ldo20_reg: LDO20 { ldo10_reg: ldo@10 {
regulator-name = "LDO20_1.8V"; regulator-compatible = "LDO10";
regulator-min-microvolt = <1800000>; regulator-name = "VDDQ_MIPIHSI_1.8V";
regulator-max-microvolt = <1800000>; regulator-min-microvolt = <1800000>;
regulator-boot-on; regulator-max-microvolt = <1800000>;
}; };
ldo21_reg: LDO21 { ldo11_reg: LDO11 {
regulator-name = "LDO21_3.3V"; regulator-name = "VDD18_ABB1_1.8V";
regulator-min-microvolt = <3300000>; regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>; regulator-max-microvolt = <1800000>;
regulator-always-on; regulator-always-on;
regulator-boot-on; };
};
ldo25_reg: LDO25 { ldo12_reg: LDO12 {
regulator-name = "VDDQ_LCD_1.8V"; regulator-name = "VDD33_USB_3.3V";
regulator-min-microvolt = <1800000>; regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <1800000>; regulator-max-microvolt = <3300000>;
regulator-always-on; regulator-always-on;
regulator-boot-on; regulator-boot-on;
}; };
buck1_reg: BUCK1 { ldo13_reg: LDO13 {
regulator-name = "vdd_mif"; regulator-name = "VDDQ_C2C_W_1.8V";
regulator-min-microvolt = <1000000>; regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1000000>; regulator-max-microvolt = <1800000>;
regulator-always-on; regulator-always-on;
regulator-boot-on; regulator-boot-on;
}; };
buck2_reg: BUCK2 { ldo14_reg: LDO14 {
regulator-name = "vdd_arm"; regulator-name = "VDD18_ABB0_2_1.8V";
regulator-min-microvolt = <900000>; regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1350000>; regulator-max-microvolt = <1800000>;
regulator-always-on; regulator-always-on;
regulator-boot-on; regulator-boot-on;
}; };
buck3_reg: BUCK3 { ldo15_reg: LDO15 {
regulator-name = "vdd_int"; regulator-name = "VDD10_HSIC_1.0V";
regulator-min-microvolt = <1000000>; regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>; regulator-max-microvolt = <1000000>;
regulator-always-on; regulator-always-on;
regulator-boot-on; regulator-boot-on;
}; };
buck4_reg: BUCK4 { ldo16_reg: LDO16 {
regulator-name = "vdd_g3d"; regulator-name = "VDD18_HSIC_1.8V";
regulator-min-microvolt = <900000>; regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1100000>; regulator-max-microvolt = <1800000>;
regulator-microvolt-offset = <50000>; regulator-always-on;
}; regulator-boot-on;
};
buck5_reg: BUCK5 { ldo20_reg: LDO20 {
regulator-name = "VDDQ_CKEM1_2_1.2V"; regulator-name = "LDO20_1.8V";
regulator-min-microvolt = <1200000>; regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1200000>; regulator-max-microvolt = <1800000>;
regulator-always-on; regulator-boot-on;
regulator-boot-on; };
};
buck6_reg: BUCK6 { ldo21_reg: LDO21 {
regulator-name = "BUCK6_1.35V"; regulator-name = "LDO21_3.3V";
regulator-min-microvolt = <1350000>; regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <1350000>; regulator-max-microvolt = <3300000>;
regulator-always-on; regulator-always-on;
regulator-boot-on; regulator-boot-on;
}; };
buck7_reg: BUCK7 { ldo25_reg: LDO25 {
regulator-name = "BUCK7_2.0V"; regulator-name = "VDDQ_LCD_1.8V";
regulator-min-microvolt = <2000000>; regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2000000>; regulator-max-microvolt = <1800000>;
regulator-always-on; regulator-always-on;
}; regulator-boot-on;
};
buck8_reg: BUCK8 { buck1_reg: BUCK1 {
regulator-name = "BUCK8_2.8V"; regulator-name = "vdd_mif";
regulator-min-microvolt = <2800000>; regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <2800000>; regulator-max-microvolt = <1000000>;
}; regulator-always-on;
regulator-boot-on;
}; };
};
};
i2c@13870000 { buck2_reg: BUCK2 {
pinctrl-names = "default"; regulator-name = "vdd_arm";
pinctrl-0 = <&i2c1_bus>; regulator-min-microvolt = <900000>;
status = "okay"; regulator-max-microvolt = <1350000>;
max98090: max98090@10 { regulator-always-on;
compatible = "maxim,max98090"; regulator-boot-on;
reg = <0x10>; };
interrupt-parent = <&gpx0>;
interrupts = <0 0>;
clocks = <&i2s0 CLK_I2S_CDCLK>;
clock-names = "mclk";
#sound-dai-cells = <0>;
};
};
exynos-usbphy@125B0000 { buck3_reg: BUCK3 {
status = "okay"; regulator-name = "vdd_int";
}; regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-boot-on;
};
hsotg@12480000 { buck4_reg: BUCK4 {
dr_mode = "peripheral"; regulator-name = "vdd_g3d";
status = "okay"; regulator-min-microvolt = <900000>;
vusb_d-supply = <&ldo15_reg>; regulator-max-microvolt = <1100000>;
vusb_a-supply = <&ldo12_reg>; regulator-microvolt-offset = <50000>;
}; };
ehci: ehci@12580000 { buck5_reg: BUCK5 {
status = "okay"; regulator-name = "VDDQ_CKEM1_2_1.2V";
}; regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
};
tmu@100C0000 { buck6_reg: BUCK6 {
vtmu-supply = <&ldo10_reg>; regulator-name = "BUCK6_1.35V";
status = "okay"; regulator-min-microvolt = <1350000>;
}; regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
thermal-zones { buck7_reg: BUCK7 {
cpu_thermal: cpu-thermal { regulator-name = "BUCK7_2.0V";
cooling-maps { regulator-min-microvolt = <2000000>;
map0 { regulator-max-microvolt = <2000000>;
/* Corresponds to 800MHz at freq_table */ regulator-always-on;
cooling-device = <&cpu0 7 7>; };
};
map1 { buck8_reg: BUCK8 {
/* Corresponds to 200MHz at freq_table */ regulator-name = "BUCK8_2.8V";
cooling-device = <&cpu0 13 13>; regulator-min-microvolt = <2800000>;
}; regulator-max-microvolt = <2800000>;
}; };
}; };
}; };
};
mixer: mixer@12C10000 { &i2c_1 {
status = "okay"; pinctrl-names = "default";
pinctrl-0 = <&i2c1_bus>;
status = "okay";
max98090: max98090@10 {
compatible = "maxim,max98090";
reg = <0x10>;
interrupt-parent = <&gpx0>;
interrupts = <0 0>;
clocks = <&i2s0 CLK_I2S_CDCLK>;
clock-names = "mclk";
#sound-dai-cells = <0>;
}; };
};
hdmi@12D00000 { &i2c_2 {
hpd-gpio = <&gpx3 7 0>; status = "okay";
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd>; pinctrl-0 = <&i2c2_bus>;
vdd-supply = <&ldo8_reg>; };
vdd_osc-supply = <&ldo10_reg>;
vdd_pll-supply = <&ldo8_reg>;
ddc = <&hdmi_ddc>;
status = "okay";
};
hdmi_ddc: i2c@13880000 { &i2c_8 {
status = "okay"; status = "okay";
pinctrl-names = "default"; };
pinctrl-0 = <&i2c2_bus>;
};
i2c@138E0000 { &i2s0 {
status = "okay"; pinctrl-0 = <&i2s0_bus>;
}; pinctrl-names = "default";
status = "okay";
clocks = <&clock_audss EXYNOS_I2S_BUS>,
<&clock_audss EXYNOS_DOUT_AUD_BUS>,
<&clock_audss EXYNOS_SCLK_I2S>;
clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
}; };
/* RSTN signal for eMMC */ &mixer {
&sd1_cd { status = "okay";
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
}; };
&pinctrl_1 { &mshc_0 {
gpio_power_key: power_key { pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
samsung,pins = "gpx1-3"; pinctrl-names = "default";
samsung,pin-pud = <0>; vmmc-supply = <&ldo20_reg &buck8_reg>;
}; mmc-pwrseq = <&emmc_pwrseq>;
status = "okay";
num-slots = <1>;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
bus-width = <8>;
cap-mmc-highspeed;
};
max77686_irq: max77686-irq { &rtc {
samsung,pins = "gpx3-2"; status = "okay";
samsung,pin-function = <0>; clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
samsung,pin-pud = <0>; clock-names = "rtc", "rtc_src";
samsung,pin-drv = <0>; };
};
hdmi_hpd: hdmi-hpd { &sdhci_2 {
samsung,pins = "gpx3-7"; bus-width = <4>;
samsung,pin-pud = <1>; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
}; pinctrl-names = "default";
vmmc-supply = <&ldo4_reg &ldo21_reg>;
cd-gpios = <&gpk2 2 0>;
cd-inverted;
status = "okay";
};
&serial_0 {
status = "okay";
};
&serial_1 {
status = "okay";
};
&tmu {
vtmu-supply = <&ldo10_reg>;
status = "okay";
};
&watchdog {
status = "okay";
}; };
arch/arm/boot/dts/exynos4412-odroidx.dts
View file @ 49c1a163
...@@ -38,14 +38,6 @@ led2 { ...@@ -38,14 +38,6 @@ led2 {
}; };
}; };
serial@13820000 {
status = "okay";
};
serial@13830000 {
status = "okay";
};
gpio_keys { gpio_keys {
pinctrl-0 = <&gpio_power_key &gpio_home_key>; pinctrl-0 = <&gpio_power_key &gpio_home_key>;
...@@ -83,3 +75,11 @@ gpio_home_key: home_key { ...@@ -83,3 +75,11 @@ gpio_home_key: home_key {
samsung,pin-pud = <0>; samsung,pin-pud = <0>;
}; };
}; };
&serial_2 {
status = "okay";
};
&serial_3 {
status = "okay";
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7