[PATCH] PATCH: usb-storage: consolidate, cleanup, etc.

This patch fixes some spelling errors and adds some BUG_ON() calls so we
can make sure that all this new code is working properly.

drivers/usb/storage/scsiglue.c

@@ -114,9 +114,10 @@ static int release(struct Scsi_Host *psh)
 	/* Kill the control threads
 	 *
 	 * Enqueue the command, wake up the thread, and wait for 
-	 * notification that it's exited.
+	 * notification that it has exited.
 	 */
 	US_DEBUGP("-- sending exit command to thread\n");
+	BUG_ON(atomic_read(&us->sm_state) != US_STATE_IDLE);
 	us->srb = NULL;
 	up(&(us->sema));
 	wait_for_completion(&(us->notify));
@@ -136,7 +137,7 @@ static int command( Scsi_Cmnd *srb )
 	return DID_BAD_TARGET << 16;
 }
 
-/* run command */
+/* queue a command */
 /* This is always called with scsi_lock(srb->host) held */
 static int queuecommand( Scsi_Cmnd *srb , void (*done)(Scsi_Cmnd *))
 {
@@ -146,6 +147,7 @@ static int queuecommand( Scsi_Cmnd *srb , void (*done)(Scsi_Cmnd *))
 	srb->host_scribble = (unsigned char *)us;
 
 	/* enqueue the command */
+	BUG_ON(atomic_read(&us->sm_state) != US_STATE_IDLE || us->srb != NULL);
 	srb->scsi_done = done;
 	us->srb = srb;
 
@@ -186,6 +188,7 @@ static int device_reset( Scsi_Cmnd *srb )
 	int result;
 
 	US_DEBUGP("device_reset() called\n" );
+	BUG_ON(atomic_read(&us->sm_state) != US_STATE_IDLE);
 
 	/* set the state and release the lock */
 	atomic_set(&us->sm_state, US_STATE_RESETTING);

drivers/usb/storage/transport.c

@@ -849,6 +849,7 @@ void usb_stor_abort_transport(struct us_data *us)
 	/* Normally the current state is RUNNING.  If the control thread
 	 * hasn't even started processing this command, the state will be
 	 * IDLE.  Anything else is a bug. */
+	BUG_ON((state != US_STATE_RUNNING && state != US_STATE_IDLE));
 
 	/* set state to abort and release the lock */
 	atomic_set(&us->sm_state, US_STATE_ABORTING);

drivers/usb/storage/usb.c

@@ -473,7 +473,7 @@ static int usb_stor_control_thread(void * __us)
 }	
 
 /* Set up the URB, the usb_ctrlrequest, and the IRQ pipe and handler.
- * ss->dev_semaphore should already be locked.
+ * ss->dev_semaphore must already be locked.
  * Note that this function assumes that all the data in the us_data
  * strucuture is current.  This includes the ep_int field, which gives us
  * the endpoint for the interrupt.

drivers/usb/storage/usb.h

@@ -131,7 +131,6 @@ struct us_data {
 	 */
 	struct semaphore	dev_semaphore;	 /* protect pusb_dev */
 	struct usb_device	*pusb_dev;	 /* this usb_device */
-
 	unsigned long		flags;		 /* from filter initially */
 
 	/* information about the device -- always good */
@@ -165,7 +164,7 @@ struct us_data {
 
 	/* thread information */
 	int			pid;		 /* control thread	 */
-	atomic_t		sm_state;
+	atomic_t		sm_state;	 /* what we are doing	 */
 
 	/* interrupt info for CBI devices -- only good if attached */
 	struct semaphore	ip_waitq;	 /* for CBI interrupts	 */
@@ -177,7 +176,7 @@ struct us_data {
 	unsigned char		irqdata[2];	 /* data from USB IRQ	 */
 
 	/* control and bulk communications data */
-	struct semaphore	current_urb_sem; /* to protect irq_urb	 */
+	struct semaphore	current_urb_sem; /* protect current_urb  */
 	struct urb		*current_urb;	 /* non-int USB requests */
 	struct usb_ctrlrequest	*dr;		 /* control requests	 */