Commit 49d9ad71 authored by Quentin Schulz's avatar Quentin Schulz Committed by Mauro Carvalho Chehab

media: ov5675: add device-tree support and support runtime PM

Until now, this driver only supported ACPI. This adds support for
Device Tree too while enabling clock and regulators in runtime PM.
Signed-off-by: default avatarQuentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: default avatarJacopo Mondi <jacopo@jmondi.org>
Signed-off-by: default avatarSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@kernel.org>
parent c9dd5714
......@@ -3,10 +3,14 @@
#include <asm/unaligned.h>
#include <linux/acpi.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-fwnode.h>
......@@ -17,7 +21,7 @@
#define OV5675_LINK_FREQ_450MHZ 450000000ULL
#define OV5675_SCLK 90000000LL
#define OV5675_MCLK 19200000
#define OV5675_XVCLK_19_2 19200000
#define OV5675_DATA_LANES 2
#define OV5675_RGB_DEPTH 10
......@@ -76,6 +80,14 @@
#define to_ov5675(_sd) container_of(_sd, struct ov5675, sd)
static const char * const ov5675_supply_names[] = {
"avdd", /* Analog power */
"dovdd", /* Digital I/O power */
"dvdd", /* Digital core power */
};
#define OV5675_NUM_SUPPLIES ARRAY_SIZE(ov5675_supply_names)
enum {
OV5675_LINK_FREQ_900MBPS,
};
......@@ -484,6 +496,9 @@ struct ov5675 {
struct v4l2_subdev sd;
struct media_pad pad;
struct v4l2_ctrl_handler ctrl_handler;
struct clk *xvclk;
struct gpio_desc *reset_gpio;
struct regulator_bulk_data supplies[OV5675_NUM_SUPPLIES];
/* V4L2 Controls */
struct v4l2_ctrl *link_freq;
......@@ -946,6 +961,56 @@ static int ov5675_set_stream(struct v4l2_subdev *sd, int enable)
return ret;
}
static int ov5675_power_off(struct device *dev)
{
/* 512 xvclk cycles after the last SCCB transation or MIPI frame end */
u32 delay_us = DIV_ROUND_UP(512, OV5675_XVCLK_19_2 / 1000 / 1000);
struct v4l2_subdev *sd = dev_get_drvdata(dev);
struct ov5675 *ov5675 = to_ov5675(sd);
usleep_range(delay_us, delay_us * 2);
clk_disable_unprepare(ov5675->xvclk);
gpiod_set_value_cansleep(ov5675->reset_gpio, 1);
regulator_bulk_disable(OV5675_NUM_SUPPLIES, ov5675->supplies);
return 0;
}
static int ov5675_power_on(struct device *dev)
{
u32 delay_us = DIV_ROUND_UP(8192, OV5675_XVCLK_19_2 / 1000 / 1000);
struct v4l2_subdev *sd = dev_get_drvdata(dev);
struct ov5675 *ov5675 = to_ov5675(sd);
int ret;
ret = clk_prepare_enable(ov5675->xvclk);
if (ret < 0) {
dev_err(dev, "failed to enable xvclk: %d\n", ret);
return ret;
}
gpiod_set_value_cansleep(ov5675->reset_gpio, 1);
ret = regulator_bulk_enable(OV5675_NUM_SUPPLIES, ov5675->supplies);
if (ret) {
clk_disable_unprepare(ov5675->xvclk);
return ret;
}
/* Reset pulse should be at least 2ms and reset gpio released only once
* regulators are stable.
*/
usleep_range(2000, 2200);
gpiod_set_value_cansleep(ov5675->reset_gpio, 0);
/* 8192 xvclk cycles prior to the first SCCB transation */
usleep_range(delay_us, delay_us * 2);
return 0;
}
static int __maybe_unused ov5675_suspend(struct device *dev)
{
struct v4l2_subdev *sd = dev_get_drvdata(dev);
......@@ -1108,32 +1173,60 @@ static const struct v4l2_subdev_internal_ops ov5675_internal_ops = {
.open = ov5675_open,
};
static int ov5675_check_hwcfg(struct device *dev)
static int ov5675_get_hwcfg(struct ov5675 *ov5675, struct device *dev)
{
struct fwnode_handle *ep;
struct fwnode_handle *fwnode = dev_fwnode(dev);
struct v4l2_fwnode_endpoint bus_cfg = {
.bus_type = V4L2_MBUS_CSI2_DPHY
};
u32 mclk;
u32 xvclk_rate;
int ret;
unsigned int i, j;
if (!fwnode)
return -ENXIO;
ret = fwnode_property_read_u32(fwnode, "clock-frequency", &mclk);
ov5675->xvclk = devm_clk_get_optional(dev, NULL);
if (IS_ERR(ov5675->xvclk))
return dev_err_probe(dev, PTR_ERR(ov5675->xvclk),
"failed to get xvclk: %ld\n",
PTR_ERR(ov5675->xvclk));
if (ov5675->xvclk) {
xvclk_rate = clk_get_rate(ov5675->xvclk);
} else {
ret = fwnode_property_read_u32(fwnode, "clock-frequency",
&xvclk_rate);
if (ret) {
dev_err(dev, "can't get clock frequency");
return ret;
}
}
if (mclk != OV5675_MCLK) {
dev_err(dev, "external clock %d is not supported", mclk);
if (xvclk_rate != OV5675_XVCLK_19_2) {
dev_err(dev, "external clock rate %u is unsupported",
xvclk_rate);
return -EINVAL;
}
ov5675->reset_gpio = devm_gpiod_get_optional(dev, "reset",
GPIOD_OUT_HIGH);
if (IS_ERR(ov5675->reset_gpio)) {
ret = PTR_ERR(ov5675->reset_gpio);
dev_err(dev, "failed to get reset-gpios: %d\n", ret);
return ret;
}
for (i = 0; i < OV5675_NUM_SUPPLIES; i++)
ov5675->supplies[i].supply = ov5675_supply_names[i];
ret = devm_regulator_bulk_get(dev, OV5675_NUM_SUPPLIES,
ov5675->supplies);
if (ret)
return ret;
ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
if (!ep)
return -ENXIO;
......@@ -1187,6 +1280,10 @@ static void ov5675_remove(struct i2c_client *client)
v4l2_ctrl_handler_free(sd->ctrl_handler);
pm_runtime_disable(&client->dev);
mutex_destroy(&ov5675->mutex);
if (!pm_runtime_status_suspended(&client->dev))
ov5675_power_off(&client->dev);
pm_runtime_set_suspended(&client->dev);
}
static int ov5675_probe(struct i2c_client *client)
......@@ -1195,25 +1292,31 @@ static int ov5675_probe(struct i2c_client *client)
bool full_power;
int ret;
ret = ov5675_check_hwcfg(&client->dev);
ov5675 = devm_kzalloc(&client->dev, sizeof(*ov5675), GFP_KERNEL);
if (!ov5675)
return -ENOMEM;
ret = ov5675_get_hwcfg(ov5675, &client->dev);
if (ret) {
dev_err(&client->dev, "failed to check HW configuration: %d",
dev_err(&client->dev, "failed to get HW configuration: %d",
ret);
return ret;
}
ov5675 = devm_kzalloc(&client->dev, sizeof(*ov5675), GFP_KERNEL);
if (!ov5675)
return -ENOMEM;
v4l2_i2c_subdev_init(&ov5675->sd, client, &ov5675_subdev_ops);
ret = ov5675_power_on(&client->dev);
if (ret) {
dev_err(&client->dev, "failed to power on: %d\n", ret);
return ret;
}
full_power = acpi_dev_state_d0(&client->dev);
if (full_power) {
ret = ov5675_identify_module(ov5675);
if (ret) {
dev_err(&client->dev, "failed to find sensor: %d", ret);
return ret;
goto probe_power_off;
}
}
......@@ -1243,11 +1346,6 @@ static int ov5675_probe(struct i2c_client *client)
goto probe_error_media_entity_cleanup;
}
/*
* Device is already turned on by i2c-core with ACPI domain PM.
* Enable runtime PM and turn off the device.
*/
/* Set the device's state to active if it's in D0 state. */
if (full_power)
pm_runtime_set_active(&client->dev);
......@@ -1262,12 +1360,15 @@ static int ov5675_probe(struct i2c_client *client)
probe_error_v4l2_ctrl_handler_free:
v4l2_ctrl_handler_free(ov5675->sd.ctrl_handler);
mutex_destroy(&ov5675->mutex);
probe_power_off:
ov5675_power_off(&client->dev);
return ret;
}
static const struct dev_pm_ops ov5675_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(ov5675_suspend, ov5675_resume)
SET_RUNTIME_PM_OPS(ov5675_power_off, ov5675_power_on, NULL)
};
#ifdef CONFIG_ACPI
......@@ -1279,11 +1380,18 @@ static const struct acpi_device_id ov5675_acpi_ids[] = {
MODULE_DEVICE_TABLE(acpi, ov5675_acpi_ids);
#endif
static const struct of_device_id ov5675_of_match[] = {
{ .compatible = "ovti,ov5675", },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, ov5675_of_match);
static struct i2c_driver ov5675_i2c_driver = {
.driver = {
.name = "ov5675",
.pm = &ov5675_pm_ops,
.acpi_match_table = ACPI_PTR(ov5675_acpi_ids),
.of_match_table = ov5675_of_match,
},
.probe_new = ov5675_probe,
.remove = ov5675_remove,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment